Maciej W. Rozycki [Tue, 6 Dec 2011 23:49:56 +0000 (23:49 +0000)]
* mips-tdep.c (mips32_next_pc): Fix floating point condition
code mask.
Maciej W. Rozycki [Tue, 6 Dec 2011 23:36:58 +0000 (23:36 +0000)]
* mips-tdep.c (deal_with_atomic_sequence): Fix the handling
of BLTZ* and BGEZ* instructions.
Jan Kratochvil [Tue, 6 Dec 2011 23:29:47 +0000 (23:29 +0000)]
gdb/gdbserver/
Fix overlapping memcpy.
* mem-break.c (set_raw_breakpoint_at): New variable buf. Use it for
the read_inferior_memory transfer.
(delete_fast_tracepoint_jump): New variable buf. Use it for the
write_inferior_memory transfer.
(set_fast_tracepoint_jump): New variable buf. Use it for the
read_inferior_memory and write_inferior_memory transfers.
(uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at)
(delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf.
Use it for the write_inferior_memory transfer.
(check_mem_read, check_mem_write): New gdb_asserts for overlapping
buffers.
Maciej W. Rozycki [Tue, 6 Dec 2011 23:19:43 +0000 (23:19 +0000)]
* mips-tdep.c (mips_pc_is_mips16): Reverse the order of checks
performed to determine whether an address refers to standard
MIPS or MIPS16 code.
(mips16_next_pc): Use mips_pc_is_mips16 instead of
is_mips16_addr.
Maciej W. Rozycki [Tue, 6 Dec 2011 23:09:08 +0000 (23:09 +0000)]
* linux-low.c (fetch_register, store_register): Make code
consistent, fix formatting.
Maciej W. Rozycki [Tue, 6 Dec 2011 23:00:15 +0000 (23:00 +0000)]
* linux-low.c (usr_store_inferior_registers): Factor out code
to handle individual registers into...
(store_register): ... this new function.
Alan Modra [Tue, 6 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Pedro Alves [Tue, 6 Dec 2011 20:03:14 +0000 (20:03 +0000)]
2011-12-06 Pedro Alves <pedro@codesourcery.com>
gdb/
* breakpoint.c (breakpoint_restore_shadows): Rename to ...
(breakpoint_xfer_memory): ... this. Change prototype. Handle
memory writes too.
* breakpoint.h (breakpoint_restore_shadows): Delete.
(breakpoint_xfer_memory): Declare.
* mem-break.c (default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Use target_write_raw_memory.
(memory_xfer_partial): Rename to ...
(memory_xfer_partial_1): ... this. Don't mask out breakpoints
here.
(memory_xfer_partial): New.
(target_write_raw_memory): New.
* target.h (target_write_raw_memory): New.
gdb/testsuite/
* gdb.base/break-always.exp: Test changing memory at addresses
with breakpoints inserted.
Doug Evans [Tue, 6 Dec 2011 19:57:47 +0000 (19:57 +0000)]
* linespec.c (decode_dollar): Avoid "may be used uninitialized" warning.
Tom Tromey [Tue, 6 Dec 2011 18:54:43 +0000 (18:54 +0000)]
the "ambiguous linespec" series
gdb
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* language.h (struct language_defn): Add new component
la_symbol_name_compare.
* symfile.h (struct quick_symbol_functions): Update the profile
of parameter "name_matcher" for the expand_symtabs_matching
method. Update the documentation accordingly.
* ada-lang.h (ada_name_for_lookup): Add declaration.
* ada-lang.c (ada_name_for_lookup): New function, extracted out
from ada_iterate_over_symbols.
(ada_iterate_over_symbols): Do not encode symbol name anymore.
(ada_expand_partial_symbol_name): Adjust profile.
(ada_language_defn): Add value for la_symbol_name_compare field.
* linespec.c: #include "ada-lang.h".
(iterate_name_matcher): Add language parameter. Replace call
to strcmp_iw by call to language->la_symbol_name_compare.
(decode_variable): Encode COPY if current language is Ada.
* dwarf2read.c (dw2_expand_symtabs_matching): Adjust profile
of name_matcher parameter. Adjust call to name_matcher.
* psymtab.c (expand_symtabs_matching_via_partial): Likewise.
(expand_partial_symbol_names): Update profile of parameter "fun".
* psymtab.h (expand_partial_symbol_names): Update profile of
parameter "fun".
* symtab.c (demangle_for_lookup): Update function documentation.
(search_symbols_name_matches): Add language parameter.
(expand_partial_symbol_name): Likewise.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Add value for
la_symbol_name_compare field.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Ditto.
* jv-lang.c (java_language_defn): Ditto.
* m2-lang.c (m2_language_defn): Ditto.
* objc-lang.c (objc_language_defn): Ditto.
* opencl-lang.c (opencl_language_defn): Ditto.
* p-lang.c (pascal_language_defn): Ditto.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Ditto.
2011-12-06 Tom Tromey <tromey@redhat.com>
* linespec.c (iterate_over_all_matching_symtabs): Use
LA_ITERATE_OVER_SYMBOLS.
(lookup_prefix_sym, add_matching_symbols_to_info): Likewise.
(find_function_symbols, decode_variable): Remove Ada special
case.
* language.h (struct language_defn) <la_iterate_over_symbols>: New
field.
(LA_ITERATE_OVER_SYMBOLS): New macro.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* ada-lang.c (ada_iterate_over_symbols): New function.
(ada_language_defn): Update.
2011-12-06 Tom Tromey <tromey@redhat.com>
Joel Brobecker <brobecker@acacore.com>
PR breakpoints/13105, PR objc/8341, PR objc/8343, PR objc/8366,
PR objc/8535, PR breakpoints/11657, PR breakpoints/11970,
PR breakpoints/12023, PR breakpoints/12334, PR breakpoints/12856,
PR shlibs/8929, PR shlibs/7393:
* python/py-type.c (compare_maybe_null_strings): Rename from
compare_strings.
(check_types_equal): Update.
* utils.c (compare_strings): New function.
* tui/tui-winsource.c (tui_update_breakpoint_info): Update for
location changes.
* tracepoint.c (scope_info): Update.
(trace_find_line_command): Use DECODE_LINE_FUNFIRSTLINE.
* symtab.h (iterate_over_minimal_symbols)
(iterate_over_some_symtabs, iterate_over_symtabs)
(find_pcs_for_symtab_line, iterate_over_symbols)
(demangle_for_lookup): Declare.
(expand_line_sal): Remove.
* symtab.c (iterate_over_some_symtabs, iterate_over_symtabs)
(lookup_symtab_callback): New functions.
(lookup_symtab): Rewrite.
(demangle_for_lookup): New function, extract from
lookup_symbol_in_language.
(lookup_symbol_in_language): Use it.
(iterate_over_symbols): New function.
(find_line_symtab): Update.
(find_pcs_for_symtab_line): New functions.
(find_line_common): Add 'start' argument.
(decode_line_spec): Update. Change argument to 'flags', change
interpretation.
(append_expanded_sal): Remove.
(append_exact_match_to_sals): Remove.
(expand_line_sal): Remove.
* symfile.h (struct quick_symbol_functions) <lookup_symtab>:
Remove.
<map_symtabs_matching_filename>: New field.
* stack.c (func_command): Only look in the current program space.
Use DECODE_LINE_FUNFIRSTLINE.
* source.c (line_info): Set pspace on sal. Check program space in
the loop. Use DECODE_LINE_LIST_MODE.
(select_source_symtab): Use DECODE_LINE_FUNFIRSTLINE.
* solib-target.c: Remove DEF_VEC_I(CORE_ADDR).
* python/python.c (gdbpy_decode_line): Update.
* psymtab.c (partial_map_expand_apply): New function.
(partial_map_symtabs_matching_filename): Rename from
lookup_partial_symbol. Update arguments.
(lookup_symtab_via_partial_symtab): Remove.
(psym_functions): Update.
* objc-lang.h (parse_selector, parse_method): Don't declare.
(find_imps): Update.
* objc-lang.c (parse_selector, parse_method): Now static.
(find_methods): Change arguments. Fill in a vector of symbol
names.
(uniquify_strings): New function.
(find_imps): Change arguments.
* minsyms.c (iterate_over_minimal_symbols): New function.
* linespec.h (enum decode_line_flags): New.
(struct linespec_sals): New.
(struct linespec_result) <canonical>: Remove.
<pre_expanded, addr_string, sals>: New fields.
(destroy_linespec_result, make_cleanup_destroy_linespec_result)
(decode_line_full): Declare.
(decode_line_1): Update.
* linespec.c (struct address_entry, struct linespec_state, struct
collect_info): New types.
(add_sal_to_sals_basic, add_sal_to_sals, hash_address_entry)
(eq_address_entry, maybe_add_address): New functions.
(total_number_of_methods): Remove.
(iterate_name_matcher, iterate_over_all_matching_symtabs): New
functions.
(find_methods): Change arguments. Don't canonicalize input.
Simplify logic.
(add_matching_methods, add_constructors)
(build_canonical_line_spec): Remove.
(filter_results, convert_results_to_lsals): New functions.
(decode_line_2): Change arguments. Rewrite for new data
structures.
(decode_line_internal): Rename from decode_line_1. Change
arguments. Add cleanups. Update for new data structures.
(linespec_state_constructor, linespec_state_destructor)
(decode_line_full, decode_line_1): New functions.
(decode_indirect): Change arguments. Update.
(locate_first_half): Use skip_spaces.
(decode_objc): Change arguments. Update for new data structures.
Simplify logic.
(decode_compound): Change arguments. Add cleanups. Remove
fallback code, replace with error.
(struct decode_compound_collector): New type.
(collect_one_symbol): New function.
(lookup_prefix_sym): Change arguments. Update.
(compare_symbol_name, add_all_symbol_names_from_pspace)
(find_superclass_methods ): New functions.
(find_method): Rewrite.
(struct symtab_collector): New type.
(add_symtabs_to_list, collect_symtabs_from_filename): New
functions.
(symtabs_from_filename): Change API. Rename from
symtab_from_filename.
(collect_function_symbols): New function.
(find_function_symbols): Change API. Rename from
find_function_symbol. Rewrite.
(decode_all_digits): Change arguments. Rewrite.
(decode_dollar): Change arguments. Use decode_variable.
(decode_label): Change arguments. Rewrite.
(collect_symbols): New function.
(minsym_found): Change arguments. Rewrite.
(check_minsym, search_minsyms_for_name)
(add_matching_symbols_to_info): New function.
(decode_variable): Change arguments. Iterate over all symbols.
(symbol_found): Remove.
(symbol_to_sal): New function.
(init_linespec_result, destroy_linespec_result)
(cleanup_linespec_result, make_cleanup_destroy_linespec_result):
New functions.
(decode_digits_list_mode, decode_digits_ordinary): New functions.
* dwarf2read.c (dw2_map_expand_apply): New function.
(dw2_map_symtabs_matching_filename): Rename from
dw2_lookup_symtab. Change arguments.
(dwarf2_gdb_index_functions): Update.
* dwarf2loc.c: Remove DEF_VEC_I(CORE_ADDR).
* defs.h (compare_strings): Declare.
* cli/cli-cmds.c (compare_strings): Move to utils.c.
(edit_command, list_command): Use DECODE_LINE_LIST_MODE. Call
filter_sals.
(compare_symtabs, filter_sals): New functions.
* breakpoint.h (struct bp_location) <line_number, source_file>:
New fields.
(struct breakpoint) <line_number, source_file>: Remove.
<filter>: New field.
* breakpoint.c (print_breakpoint_location, init_raw_breakpoint)
(momentary_breakpoint_from_master, add_location_to_breakpoint):
Update for changes to locations.
(init_breakpoint_sal): Add 'filter' argument. Set 'filter' on
breakpoint.
(create_breakpoint_sal): Add 'filter' argument.
(remove_sal, expand_line_sal_maybe): Remove.
(create_breakpoints_sal): Remove 'sals' argument. Handle
pre-expanded sals and the filter.
(parse_breakpoint_sals): Use decode_line_full.
(check_fast_tracepoint_sals): Use get_sal_arch.
(create_breakpoint): Create a linespec_sals. Update.
(break_range_command): Use decode_line_full. Update.
(until_break_command): Update.
(clear_command): Update match conditions for linespec.c changes.
Use DECODE_LINE_LIST_MODE.
(say_where): Update for changes to locations.
(bp_location_dtor): Free 'source_file'.
(base_breakpoint_dtor): Free 'filter'. Don't free 'source_file'.
(update_static_tracepoint): Update for changes to locations.
(update_breakpoint_locations): Disable ranged breakpoint if too
many locations match. Update.
(addr_string_to_sals): Use decode_line_full. Resolve all sal
PCs.
(breakpoint_re_set_default): Don't call expand_line_sal_maybe.
(decode_line_spec_1): Update. Change argument name to 'flags',
change interpretation.
* block.h (block_containing_function): Declare.
* block.c (block_containing_function): New function.
* skip.c (skip_function_command): Update.
(skip_re_set): Update.
* infcmd.c (jump_command): Use DECODE_LINE_FUNFIRSTLINE.
* mi/mi-main.c (mi_cmd_trace_find): Use DECODE_LINE_FUNFIRSTLINE.
* NEWS: Add entry.
2011-12-06 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Allow
breakpoint's pspace to be NULL.
* breakpoint.h (struct breakpoint) <pspace>: Update comment.
* breakpoint.c (init_raw_breakpoint): Conditionally set
breakpoint's pspace.
(init_breakpoint_sal): Don't set breakpoint's pspace.
(prepare_re_set_context): Conditionally switch program space.
(addr_string_to_sals): Check executing_startup on location's
program space.
2011-12-06 Tom Tromey <tromey@redhat.com>
* breakpoint.h (enum enable_state) <bp_startup_disabled>: Remove.
* breakpoint.c (should_be_inserted): Explicitly check if program
space is executing startup.
(describe_other_breakpoints): Update.
(disable_breakpoints_before_startup): Change executing_startup
earlier. Remove loop.
(enable_breakpoints_after_startup): Likewise.
(init_breakpoint_sal): Don't use bp_startup_disabled.
(create_breakpoint): Don't use bp_startup_disabled.
(update_global_location_list): Use should_be_inserted.
(bkpt_re_set): Update.
gdb/testsuite
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* gdb.ada/fullname_bp.exp: Add tests for other valid linespecs
involving a fully qualified function name.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.ada/homonym.exp: Add three breakpoint tests.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.base/solib-weak.exp (do_test): Remove kfail.
* gdb.trace/tracecmd.exp: Disable pending breakpoints earlier.
* gdb.objc/objcdecode.exp: Update for output changes.
* gdb.linespec/linespec.exp: New file.
* gdb.linespec/lspec.cc: New file.
* gdb.linespec/lspec.h: New file.
* gdb.linespec/body.h: New file.
* gdb.linespec/base/two/thefile.cc: New file.
* gdb.linespec/base/one/thefile.cc: New file.
* gdb.linespec/Makefile.in: New file.
* gdb.cp/templates.exp (test_template_breakpoints): Update for
output changes.
* gdb.cp/re-set-overloaded.exp: Remove kfail.
* gdb.cp/ovldbreak.exp: Update for output changes. "all" test now
makes one breakpoint.
* gdb.cp/method2.exp (test_break): Update for output changes.
* gdb.cp/mb-templates.exp: Update for output changes.
* gdb.cp/mb-inline.exp: Update for output changes.
* gdb.cp/mb-ctor.exp: Update for output changes.
* gdb.cp/ovsrch.exp: Use fully-qualified names.
* gdb.base/solib-symbol.exp: Run to main later. Breakpoint now
has multiple matches.
* gdb.base/sepdebug.exp: Disable pending breakpoints. Update for
error message change.
* gdb.base/list.exp (test_list_filename_and_number): Update for
error message change.
* gdb.base/break.exp: Disable pending breakpoints. Update for
output changes.
* configure.ac: Add gdb.linespec.
* configure: Rebuild.
* Makefile.in (ALL_SUBDIRS): Add gdb.linespec.
gdb/doc
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Set Breaks): Update for new behavior.
Tom Tromey [Tue, 6 Dec 2011 17:38:53 +0000 (17:38 +0000)]
* python/lib/gdb/command/pretty_printers.py
(InfoPrettyPrinter.invoke1): Remove extra double quote.
Tom Tromey [Tue, 6 Dec 2011 14:27:39 +0000 (14:27 +0000)]
* NEWS: Add MI news.
Ulrich Weigand [Tue, 6 Dec 2011 14:14:50 +0000 (14:14 +0000)]
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
Ulrich Weigand [Tue, 6 Dec 2011 14:09:12 +0000 (14:09 +0000)]
include/elf/ChangeLog:
* common.h (NT_S390_LAST_BREAK): Define.
(NT_S390_SYSTEM_CALL): Likewise.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_last_break): Add prototype.
(elfcore_write_s390_system_call): Likewise.
* elf.c (elfcore_write_s390_last_break): New function.
(elfcore_write_s390_system_call): Likewise.
(elfcore_write_register_note): Call them.
(elfcore_grok_s390_last_break): New function.
(elfcore_grok_s390_system_call): Likewise.
(elfcore_grok_note): Call them.
Joel Brobecker [Tue, 6 Dec 2011 14:00:37 +0000 (14:00 +0000)]
fix incorrect assumption in gdb.ada/watch_arg
The testcase is assuming that the parameter being watched isn't being
modified. But the way the test program is written, this is not true
at all. So this changes fixes the code to still reference the variable,
but in a way that does not modify its value.
gdb/testsuite:
* gdb.ada/watch_arg/pck.ads, gdb.ada/watch_arg/pck.adb: New files.
* gdb.ada/watch_arg/watch.adb: Adjust code to avoid modification
of parameter X in procedure Foo.
gdbadmin [Tue, 6 Dec 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Stan Shebs [Mon, 5 Dec 2011 23:32:52 +0000 (23:32 +0000)]
* gdb.trace/tfind.exp: Update help string matches.
Alan Modra [Mon, 5 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Pedro Alves [Mon, 5 Dec 2011 18:49:49 +0000 (18:49 +0000)]
2011-12-05 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (resume_stopped_resumed_lwps): Call
registers_changed.
Jan Kratochvil [Mon, 5 Dec 2011 18:27:44 +0000 (18:27 +0000)]
gdb/testsuite/
* gdb.server/ext-run.exp (get process list): Accept also systemd
as PID 1.
Nick Clifton [Mon, 5 Dec 2011 17:11:31 +0000 (17:11 +0000)]
* ld-cris/weakref4.d: Updated pattern match for the message from
readelf stating that there are no decoded unwind sections.
* tls-js1.d: Likewise.
* tls-local-63.d: Likewise.
* tls-local-64.d: Likewise.
* tls-und-38.d: Likewise.
* tls-und-42.d: Likewise.
* tls-und-46.d: Likewise.
* tls-und-50.d: Likewise.
* weakref3.d: Likewise.
* weakref4.d: Likewise.
Pedro Alves [Mon, 5 Dec 2011 16:57:30 +0000 (16:57 +0000)]
* breakpoint.c: Include record.h.
(breakpoints_always_inserted_mode): Return false when the record
target is in use.
Richard Earnshaw [Mon, 5 Dec 2011 15:43:53 +0000 (15:43 +0000)]
* tc-arm.c (aeabi_set_public_attributes): Correctly set
Tag_ARM_ISA_use and Tag_Thumb_ISA_use.
* gas/arm/attr-any-armv4t.d: New test.
* gas/arm/attr-any-armv4t.s: New file.
* gas/arm/attr-any-thumbv6.d: New test.
* gas/arm/attr-any-thumbv6.s: New file.
Matthew Gretton-Dann [Mon, 5 Dec 2011 14:51:54 +0000 (14:51 +0000)]
* gas/config/tc-arm.c (arm_cpu_option_table): Add name_len field.
(arm_arch_option_table): Likewise.
(arm_option_extension_value_table): Likewise.
(ARM_CPU_OPT): New define.
(ARM_ARCH_OPT): Likewise.
(ARM_EXT_OPT): Likewise.
(arm_cpus): Use ARM_CPU_OPT to initialize.
(arm_archs): Use ARM_ARCH_OPT to initialize.
(arm_extensions): Use ARM_EXT_OPT to initialize.
(arm_parse_extension): Ensure option string matching matches
the whole string.
(arm_parse_cpu): Likewise.
(arm_parse_arch): Likewise.
* gas/testsuite/gas/arm/cmdline-bad-arch.d: New test case.
* gas/testsuite/gas/arm/cmdline-bad-cpu.d: Likewise.
Tristan Gingold [Mon, 5 Dec 2011 14:42:31 +0000 (14:42 +0000)]
2011-12-05 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_read_symtab_symbol): Accept indirect symbols.
Pedro Alves [Mon, 5 Dec 2011 14:20:06 +0000 (14:20 +0000)]
Not 2012 yet...
Pedro Alves [Mon, 5 Dec 2011 14:16:50 +0000 (14:16 +0000)]
2012-12-05 Pedro Alves <pedro@codesourcery.com>
* amd64-linux-nat.c (amd64_linux_dr_get): Remove FIXME comment.
Reinstate perror_with_name call on ptrace error. Remove #if 0.
* i386-linux-nat.c (i386_linux_dr_get): Likewise.
* i386bsd-nat.c (i386bsd_dr_get_status): Likewise.
Tristan Gingold [Mon, 5 Dec 2011 14:10:11 +0000 (14:10 +0000)]
2011-12-05 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_write_contents): Handle LC_LOAD_UPWARD_DYLIB.
(bfd_mach_o_read_dylib): Likewise.
(bfd_mach_o_read_command): Likewise.
(bfd_mach_o_bfd_print_private_bfd_data): Likewise.
Tristan Gingold [Mon, 5 Dec 2011 13:48:54 +0000 (13:48 +0000)]
2011-12-05 Tristan Gingold <gingold@adacore.com>
* mach-o.c (bfd_mach_o_read_command): Add the bfd in the error
message.
(bfd_mach_o_openr_next_archived_file): Use arch name as member name.
(bfd_mach_o_fat_extract): Ditto.
Andrey Smirnov [Mon, 5 Dec 2011 04:10:47 +0000 (04:10 +0000)]
* breakpoint.c (init_breakpoint_sal): Remove nested definitions of
`i'(-Wshadow).
Andrey Smirnov [Mon, 5 Dec 2011 03:58:23 +0000 (03:58 +0000)]
* bcache.c (bcache): Rename `bcache' to `cache'(-Wshadow).
Andrey Smirnov [Mon, 5 Dec 2011 03:48:29 +0000 (03:48 +0000)]
* amd64-tdep.c (amd64_push_dummy_call): Remove nested definition
of `tdep'(-Wshadow).
gdbadmin [Mon, 5 Dec 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 4 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 4 Dec 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 3 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Sat, 3 Dec 2011 20:20:29 +0000 (20:20 +0000)]
gdb/testsuite/
* gdb.base/break-entry.exp: Move the target use_gdb_stub test before
starting GDB.
* gdb.base/default.exp: Replace target use_gdb_stub checks by global
$use_gdb_stub.
* gdb.base/display.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
* gdb.base/list.exp (test_listsize): Likewise.
* gdb.base/setshow.exp: Likewise.
* gdb.base/valgrind-db-attach.exp: Set global use_gdb_stub to 1.
* lib/gdb.exp (gdb_run_cmd, gdb_start_cmd): Replace target use_gdb_stub
check by global $use_gdb_stub.
(gdb_test_multiple): Forbid run, start or attach for !$use_gdb_stub.
(default_gdb_start): Set global use_gdb_stub from target use_gdb_stub.
(default_gdb_init): Unset global $use_gdb_stub.
(gdb_continue_to_end, rerun_to_main): Replace target use_gdb_stub check
by global $use_gdb_stub.
* lib/gdbserver-support.exp: Extend comments for set_board_info
gdb_protocol and gdb,socketport.
(gdbserver_start_extended): Set global gdbserver_protocol and
gdbserver_gdbport. Clear global use_gdb_stub.
* lib/mi-support.exp (default_mi_gdb_start): Set global use_gdb_stub
from target use_gdb_stub.
(mi_run_cmd): Replace target use_gdb_stub check by global $use_gdb_stub.
Mike Frysinger [Sat, 3 Dec 2011 19:05:15 +0000 (19:05 +0000)]
sim: bfin: lookup target strings when tracing system calls
Parsing target addresses is hard if not generally useless, so use the new
cb_get_string function to lookup the associated strings as well. Now the
trace output is quickly useful instead of just marginally so.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 3 Dec 2011 18:39:43 +0000 (18:39 +0000)]
sim: export cb_get_string for people to use
The common sim code provides a useful "get_string" function which reads
a C string out of the target's memory space. So rename and export it
for other people to use.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Jan Kratochvil [Sat, 3 Dec 2011 18:32:29 +0000 (18:32 +0000)]
gdb/
Fix compilation --without-expat.
* solib-svr4.c (svr4_free_so, svr4_free_library_list): Move them here
from ...
[HAVE_LIBEXPAT] (svr4_free_so, svr4_free_library_list): ... here.
Mike Frysinger [Sat, 3 Dec 2011 18:23:51 +0000 (18:23 +0000)]
sim: generate build dependencies on the fly
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Doug Evans [Sat, 3 Dec 2011 18:01:50 +0000 (18:01 +0000)]
* lib/gdb.exp (gdb_run_cmd, gdb_start_cmd, run_to_main): Add comments.
(gdb_step_for_stub): Add comments.
David Daney [Sat, 3 Dec 2011 17:13:02 +0000 (17:13 +0000)]
2011-12-03 David Daney <david.daney@cavium.com>
* ld-bootstrap/bootstrap.exp: Use consistent flags for final link
in ia64 and mips cases.
Richard Sandiford [Sat, 3 Dec 2011 10:29:53 +0000 (10:29 +0000)]
gas/testsuite/
* gas/mips/mips.exp (run_dump_test_arch): Add an opts parameter.
(run_dump_test_arches): Allow additional options to be passed.
(run_list_test_arch): Add opts to the name.
(run_list_test_arches): Allow the options to be elided.
(mips4-fp, mips5-fp): Run twice, one with -32 and once with -mabi=o64.
(mips64r2-ill, octeon-ill): Remove empty options string.
Alan Modra [Sat, 3 Dec 2011 10:29:01 +0000 (10:29 +0000)]
PR ld/13468
* elflink.c (bfd_elf_final_link): Don't segfault when checking
for DT_TEXTREL and .dynamic does not exist.
Alan Modra [Sat, 3 Dec 2011 00:55:50 +0000 (00:55 +0000)]
PR ld/13470
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Revert substantive
change in 2011-07-01 commit. Comment.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Likewise.
gdbadmin [Sat, 3 Dec 2011 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Maciej W. Rozycki [Fri, 2 Dec 2011 23:58:01 +0000 (23:58 +0000)]
* lib/gdb.exp (gdb_expect): Pass all the exception conditions up
to the caller.
(gdb_test_multiple): Likewise.
Alan Modra [Fri, 2 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Fri, 2 Dec 2011 22:35:17 +0000 (22:35 +0000)]
gdb/testsuite/
Fix gdb.mi/mi-solib.exp without system debug info installed.
* lib/mi-support.exp (mi_expect_stop): Accept FILE also for `from'
expect attribute, return 0 for it. Update comments.
Jan Kratochvil [Fri, 2 Dec 2011 22:26:54 +0000 (22:26 +0000)]
gdb/
* Makefile.in (XMLFILES): Add library-list-svr4.dtd.
* features/library-list-svr4.dtd: New file.
* remote.c (PACKET_qXfer_libraries_svr4): New.
(remote_protocol_features): new entry for PACKET_qXfer_libraries_svr4.
(remote_xfer_partial): Handle TARGET_OBJECT_LIBRARIES_SVR4.
* solib-svr4.c (struct svr4_library_list): New.
[HAVE_LIBEXPAT]: Include xml-support.h.
[HAVE_LIBEXPAT] (svr4_library_list_start_library)
[HAVE_LIBEXPAT] (svr4_library_list_start_list, svr4_library_attributes)
[HAVE_LIBEXPAT] (svr4_library_list_children)
[HAVE_LIBEXPAT] (svr4_library_list_attributes)
[HAVE_LIBEXPAT] (svr4_library_list_elements, svr4_parse_libraries)
[HAVE_LIBEXPAT] (svr4_current_sos_via_xfer_libraries)
[!HAVE_LIBEXPAT] (svr4_current_sos_via_xfer_libraries): New.
(svr4_read_so_list): Extend the corruption message by addresses.
(svr4_current_sos): New variable library_list, call
svr4_current_sos_via_xfer_libraries.
* target.h (enum target_object): New TARGET_OBJECT_LIBRARIES_SVR4.
gdb/gdbserver/
* linux-low.c (get_phdr_phnum_from_proc_auxv, get_dynamic, get_r_debug)
(read_one_ptr, struct link_map_offsets, linux_qxfer_libraries_svr4):
New.
(struct linux_target_ops): Install linux_qxfer_libraries_svr4.
* linux-low.h (struct process_info_private): New member r_debug.
* server.c (handle_qxfer_libraries): Call
the_target->qxfer_libraries_svr4.
(handle_qxfer_libraries_svr4): New function.
(qxfer_packets): New entry "libraries-svr4".
(handle_query): Check QXFER_LIBRARIES_SVR4 and report libraries-svr4.
* target.h (struct target_ops): New member qxfer_libraries_svr4.
* remote.c (remote_xfer_partial): Call add_packet_config_cmd for
PACKET_qXfer_libraries_svr4.
gdb/doc/
* gdb.texinfo (Requirements, Remote Protocol): Reference also `Library
List Format for SVR4 Targets'.
(General Query Packets): New item qXfer:libraries-svr4:read.
(Library List Format for SVR4 Targets): New node.
gdb/testsuite/
* gdb.base/solib-corrupted.exp: Suppress test on is_remote target.
(corrupted list): Adjust the expectation.
Nick Clifton [Fri, 2 Dec 2011 17:04:33 +0000 (17:04 +0000)]
* readelf.c (ia64_process_unwind): Turn into a void funtion.
(hppa_process_unwind): Likewise.
(arm_process_unwind): Likewise.
(process_unwind): Likewise.
(arm_get_section_word): Rename to get_unwind_section_word.
Add sym_name parameter to return the offset into the string table
of the symbol associated with the reloc applied to the word.
(decode_tic6x_unwind_regmask): Add NULL argument to invocation of
get_unwind_section_word.
(dump_arm_unwind): Likewise.
(decode_arm_unwind_bytecode): Prepend a comma when *not* the first
register in a list.
(decode_arm_unwind): If the returned function address is 0 and a
valid symname offset is provided use that to compute the name
associated with the entry.
Add extra checks of the compact model index entry.
Jan Kratochvil [Fri, 2 Dec 2011 17:01:20 +0000 (17:01 +0000)]
gdb/
PR threads/13448
* dwarf2read.c (decode_locdesc): Handle DW_OP_const8u.
For DW_OP_GNU_push_tls_address increment the value, new comment for it.
gdb/testsuite/
PR threads/13448
* gdb.dwarf2/dw2-var-zero-addr.S: New file.
* gdb.dwarf2/dw2-var-zero-addr.exp: New file.
* gdb.threads/tls-var-main.c: New file.
* gdb.threads/tls-var.c: New file.
* gdb.threads/tls-var.exp: New file.
Jan Kratochvil [Fri, 2 Dec 2011 12:43:29 +0000 (12:43 +0000)]
gdb/testsuite/
PR testsuite/12649
* gdb.trace/collection.exp (gdb_collect_return_test): Import gdb_prompt.
Protect gdb_test_multiple by final $gdb_prompt match.
* gdb.trace/tspeed.exp (gdb_fast_trace_speed_test): Likewise.
* gdb.trace/tstatus.exp (run_trace_experiment): Likewise.
(test_tracepoints): Likewise.
Jan Kratochvil [Fri, 2 Dec 2011 01:28:55 +0000 (01:28 +0000)]
gdb/
PR breakpoints/13346
* dwarf2read.c (process_psymtab_comp_unit): Set
PSYMTABS_ADDRMAP_SUPPORTED.
* psympriv.h (struct partial_symtab): Comment textlow and texthigh
validity. New field psymtabs_addrmap_supported.
* psymtab.c (find_pc_sect_psymtab_closer): New gdb_assert on
psymtabs_addrmap_supported.
(find_pc_sect_psymtab): Do not fallback to TEXTLOW and TEXTHIGH for
!PSYMTABS_ADDRMAP_SUPPORTED.
(dump_psymtab, maintenance_info_psymtabs): Print also
psymtabs_addrmap_supported.
gdb/testsuite/
PR breakpoints/13346
* gdb.dwarf2/dw2-objfile-overlap-inner.S: New file.
* gdb.dwarf2/dw2-objfile-overlap-outer.S: New file.
* gdb.dwarf2/dw2-objfile-overlap.exp: New file.
Doug Evans [Fri, 2 Dec 2011 00:27:48 +0000 (00:27 +0000)]
* python/py-type.c (type_object_methods): Fix "array" doc string.
gdbadmin [Fri, 2 Dec 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Joel Brobecker [Thu, 1 Dec 2011 23:16:44 +0000 (23:16 +0000)]
Make sure all types in gdb.ada/homonym testcase are used...
Otherwise, the compiler does not generate any debug info for them.
This fixes 3 FAILs:
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2
gdb/testsuite/ChangeLog:
* gdb.ada/homonym/pck.ads, gdb.ada/homonym/pck.adb: New files.
* gdb.ada/homonym/homonym.adb: For use of all types defined
locally inside both Get_Value subprograms.
Alan Modra [Thu, 1 Dec 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Thu, 1 Dec 2011 22:06:45 +0000 (22:06 +0000)]
gdb/testsuite/
Fix racy FAILs.
* gdb.base/foll-exec.exp (zap_session): Use gdb_test_no_output instead
of send_gdb.
Tom Tromey [Thu, 1 Dec 2011 20:27:28 +0000 (20:27 +0000)]
* gdb.texinfo (Writing a Pretty-Printer): Use append method, not
add.
Nick Clifton [Thu, 1 Dec 2011 15:50:58 +0000 (15:50 +0000)]
* elf32-m68k.c (elf_m68k_check_relocs) <R_68K_8, R68K_16, R_68K_32>: For
non-SEC_ALLOC sections break before GOT and PLT accounting.
Nick Clifton [Thu, 1 Dec 2011 11:38:32 +0000 (11:38 +0000)]
* emultempl/spuelf.em (spu_elf_relink): Use pex_one in place
of execvp.
Andrew Burgess [Thu, 1 Dec 2011 10:37:06 +0000 (10:37 +0000)]
sourceware.org/ml/gdb-patches/2011-11/msg00778.html
* source.c (print_source_lines_base): Fix missing braces on else clause
leading to additional output.
Hans-Peter Nilsson [Thu, 1 Dec 2011 02:51:14 +0000 (02:51 +0000)]
* elf32-cris.c (cris_elf_check_relocs) <plt accounting for
R_CRIS_8, R_CRIS_16, and R_CRIS_32>: Move early break for
non-SEC_ALLOC sections before GOT and PLT accounting.
gdbadmin [Thu, 1 Dec 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 30 Nov 2011 23:00:07 +0000 (23:00 +0000)]
daily update
Ulrich Weigand [Wed, 30 Nov 2011 16:06:55 +0000 (16:06 +0000)]
ChangeLog:
* s390-nat.c (SUBOFF): Remove.
(s390_native_supply, s390_native_collect): New functions.
(supply_gregset, supply_fpregset): Use s390_native_supply.
(fill_gregset, fill_fpregset): Use s390_native_collect.
* s390-tdep.c (s390_pseudo_register_reggroup_p): Update comment.
(s390_unwind_pseudo_register): New function.
(s390_prologue_frame_unwind_cache): Unwind PSW address and mask
registers instead of PC and CC.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_sigtramp_frame_unwind_cache): Do not unwind PC, CC, or
full GPR pseudos.
(s390_trad_frame_prev_register): New function.
(s390_frame_prev_register): Use it.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_dwarf2_prev_register): Use s390_unwind_pseudo_register.
(s390_dwarf2_frame_init_reg): Unwind PSW address and mask. Use
special callback to unwind any pseudo.
* features/s390-core32.xml: Add pswm/pswa to save/restore group.
* features/s390-core64.xml: Likewise.
* features/s390x-core64.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
gdbserver/ChangeLog:
* linux-s390-low.c (s390_collect_ptrace_register): Fully convert
PSW address/mask between 8-byte and 16-byte formats.
(s390_supply_ptrace_register): Likewise.
(s390_get_pc, s390_set_pc): 4-byte PSW address always includes
basic addressing mode bit.
Ulrich Weigand [Wed, 30 Nov 2011 08:26:46 +0000 (08:26 +0000)]
* s390-tdep.c (s390_gdbarch_init): Call set_gdbarch_get_siginfo_type.
Ulrich Weigand [Wed, 30 Nov 2011 08:26:06 +0000 (08:26 +0000)]
* s390-tdep.c (s390_displaced_step_fixup): Fix processing of LARL
instruction. Add more diagnostic output.
Ulrich Weigand [Wed, 30 Nov 2011 08:25:17 +0000 (08:25 +0000)]
* gdb.base/testenv.exp: Skip on remote targets. Unset global
environment variable after test completed.
Ulrich Weigand [Wed, 30 Nov 2011 08:24:32 +0000 (08:24 +0000)]
* gdb.base/solib-nodir.exp: Skip if remote target.
* gdb.base/gdb.fortran.exp: Use shlib= flag when linking main
application. Call gdb_load_shlibs.
* gdb.mi/mi-solib.exp: Use mi_load_shlibs instead of gdb_load_shlibs.
gdbadmin [Wed, 30 Nov 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 29 Nov 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Andrew Pinski [Tue, 29 Nov 2011 20:28:55 +0000 (20:28 +0000)]
opcode/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips-dis.c (mips_arch_choices): Add Octeon+.
* mips-opc.c (IOCT): Include Octeon+.
(IOCTP): New macro.
(mips_builtin_opcodes): Add "saa" and "saad".
bfd/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* archures.c (bfd_mach_mips_octeonp): New macro.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c (I_mipsocteonp): New enum value.
(arch_info_struct): Add bfd_mach_mips_octeonp.
* elfxx-mips.c (mips_set_isa_flags): Add bfd_mach_mips_octeonp.
(mips_mach_extensions): Add bfd_mach_mips_octeonp.
include/opcodes/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* mips.h (INSN_CHIP_MASK): Update according to INSN_OCTEONP.
(INSN_OCTEONP): New macro.
(CPU_OCTEONP): New macro.
(OPCODE_IS_MEMBER): Add Octeon+.
(M_SAA_AB, M_SAAD_AB, M_SAA_OB, M_SAAD_OB): New enum values.
gas/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* config/tc-mips.c (CPU_IS_OCTEON): New macro function.
(CPU_HAS_SEQ): Change to use CPU_IS_OCTEON.
(NO_ISA_COP): Likewise.
(macro) <ld_st>: Add support when off0 is true.
Add support for M_SAA_AB, M_SAA_OB, M_SAAD_OB and M_SAAD_AB.
(mips_cpu_info_table): Add octeon+.
* doc/c-mips.texi: Document octeon+ as an acceptable value for -march=.
gas/testsuite/
2011-11-29 Andrew Pinski <apinski@cavium.com>
* gas/mips/mips.exp: Add octeon+ for an architecture.
Run octeon-saa-saad test.
(run_dump_test_arch): For Octeon architectures, also try octeon@.
* gas/mips/octeon-pref.d: Remove -march=octeon from command line.
* gas/mips/octeon.d: Likewise.
* gas/mips/octeon-saa-saad.d: New file.
* gas/mips/octeon-saa-saad.s: New file
Roland McGrath [Tue, 29 Nov 2011 18:07:41 +0000 (18:07 +0000)]
* ar.c (ranlib_usage): Describe -D.
(ranlib_main): Parse -D.
(ranlib_touch): Set BFD_DETERMINISTIC_OUTPUT under -D.
* doc/binutils.texi (ranlib): Describe -D, and also --help/-h/-H.
Joel Brobecker [Tue, 29 Nov 2011 16:59:45 +0000 (16:59 +0000)]
New gdb.base/infoline.exp testcase.
gdb/testsuite/ChangeLog:
* gdb.base/infoline.c, gdb.base/infoline.exp: New files.
Maciej W. Rozycki [Tue, 29 Nov 2011 12:42:10 +0000 (12:42 +0000)]
PR ld/10144
* lib/ld-lib.exp (run_ld_link_tests): Handle sources from other
directories.
(run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
* ld-elf/comm-data1.sd: New test.
* ld-elf/comm-data1.s: Source for the new test.
* ld-elf/comm-data2.sd: New test.
* ld-elf/comm-data2.rd: Likewise.
* ld-elf/comm-data2.xd: Likewise.
* ld-elf/comm-data2.s: Source for the new tests.
* ld-elf/comm-data.exp: New file.
* ld-mips-elf/comm-data.exp: Likewise.
Andrey Smirnov [Tue, 29 Nov 2011 10:26:23 +0000 (10:26 +0000)]
* MAINTAINERS (Write After Approval): Add myself to the list.
Sanjoy Das [Tue, 29 Nov 2011 08:30:29 +0000 (08:30 +0000)]
gdb/
* jit.c (add_objfile_entry, jit_reader_try_read_symtab)
(jit_bfd_try_read_symtab): Fix comments.
Joel Brobecker [Tue, 29 Nov 2011 06:25:05 +0000 (06:25 +0000)]
Record Mike Frysinger as a sim Global Maintainer.
sim/ChangeLog:
* maintainers (global maintainers): new section. add mike
frysinger.
DJ Delorie [Tue, 29 Nov 2011 03:49:09 +0000 (03:49 +0000)]
[sim]
* configure.tgt: Add rl78 support.
* configure: Regenerate.
* rl78: New directory.
* MAINTAINERS: Add myself as RL78 maintainer.
[gdb]
* NEWS: Mention RL78 simulator.
Joel Brobecker [Tue, 29 Nov 2011 01:09:23 +0000 (01:09 +0000)]
Further fix the documentation in struct quick_symbol_functions
gdb/ChangeLog:
* symfile.h (struct quick_symbol_functions): Fix the documentation
of field map_matching_symbols, as symbols are sorted using
strcmp_iw_ordered, not strcmp_iw.
Joel Brobecker [Tue, 29 Nov 2011 01:01:02 +0000 (01:01 +0000)]
Update documentation in struct quick_symbol_functions
Paul sent me this documentiion update when I asked him a question
about compare_names in ada-lang.c.
gdb/ChangeLog:
* symfile.h (struct quick_symbol_functions): Update the
documentation for field map_matching_symbols.
Joel Brobecker [Tue, 29 Nov 2011 01:00:52 +0000 (01:00 +0000)]
wrong value returned by ada-lang.c:compare_names
The ada-lang.c:compare_names function returns the wrong value
when the first string starts with the same contents as the second
string, followed by '_' and then some characters that do not make
a symbol name suffix. For instance:
string1 = "generics__test_generics__instance__print"
string2 = "generics__test_generics"
In that case, compare_names (string1, string2) return -1, when
clearly, string1 is greater than string2.
A consequence of this problem is that GDB may fail to lookup
"generics.test_generics" from our partial symtabs, because
partial symbols are ordered by strcmp_iw_ordered:
(gdb) b generics.test_generics
Function "generics.test_generics" not defined.
Make breakpoint pending on future shared library load? (y or [n])
gdb/ChangeLog:
* ada-lang.c (compare_names): Fix wrong return value in case
string1 starts with the same contents as string2, followed
by an underscore that do not start a symbol name suffix.
gdb/testsuite/ChangeLog:
* gdb.ada/fullname_bp: New testcase.
gdbadmin [Tue, 29 Nov 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 28 Nov 2011 23:00:05 +0000 (23:00 +0000)]
daily update
Nick Clifton [Mon, 28 Nov 2011 16:51:09 +0000 (16:51 +0000)]
PR binutils/13421
* readelf.c (arm_section_get_word): Add descriptive comments.
Initliase the rel_type field of the arm_sec structure.
(expand_prel31): Rename to arm_expand_prel31.
(dump_arm_unwind): Use new name.
Print the function name based on the function address entry.
Phil Muldoon [Mon, 28 Nov 2011 15:49:43 +0000 (15:49 +0000)]
2011-11-28 Phil Muldoon <pmuldoon@redhat.com>
PR python/13369
PR python/13374
* python/python.c (gdbpy_decode_line): Do not acquire GIL.
* python/py-inferior.c (inferior_to_inferior_object): Ditto.
* python/py-value.c (valpy_nonzero): Use TRY_CATCH to catch GDB
exceptions.
* python/py-type.c (typy_strip_typedefs): Ditto.
(typy_legacy_template_argument): Ditto.
* python/py-inferior.c (inferior_to_inferior_object): Ditto.
* python/py-breakpoint.c (bppy_set_ignore_count): Ditto.
gdbadmin [Mon, 28 Nov 2011 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 27 Nov 2011 23:00:06 +0000 (23:00 +0000)]
daily update
Joel Brobecker [Sun, 27 Nov 2011 17:39:30 +0000 (17:39 +0000)]
remove use of sprintf_vma in remote_get_tracepoint_status
This function takes a VMA and was forcing us to perform a cast to
compile without warning on one platform. Except that the cast caused
a warning on sparc-solaris. This patch fixes the problem by using
phex_nz instead.
gdb/ChangeLog:
* remote.c (remote_get_tracepoint_status): Delete addrbuf
local variable. Avoid use of sprintf_vma.
Sanjoy Das [Sun, 27 Nov 2011 14:26:09 +0000 (14:26 +0000)]
gdb/
Fix regression in jit.exp.
* jit.c (jit_reader_try_read_symtab, jit_bfd_try_read_symtab)
(jit_register_code): Set the jit_objfile_data field to the correct
value.
gdbadmin [Sun, 27 Nov 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 26 Nov 2011 23:00:05 +0000 (23:00 +0000)]
daily update
gdbadmin [Sat, 26 Nov 2011 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Jan Kratochvil [Fri, 25 Nov 2011 23:53:45 +0000 (23:53 +0000)]
gdb/testsuite/
Code cleanup.
* gdb.reverse/i386-sse-reverse.exp (continue to end of sse4_test):
Convert send_gdb and gdb_expect to gdb_test_multiple.
Jan Kratochvil [Fri, 25 Nov 2011 23:50:15 +0000 (23:50 +0000)]
gdb/testsuite/
PR testsuite/12649
* gdb.reverse/i386-sse-reverse.exp (continue to end of sse_test #2):
Wrap send_gdb into a new gdb_test.
Jan Kratochvil [Fri, 25 Nov 2011 23:26:15 +0000 (23:26 +0000)]
gdb/testsuite/
* gdb.base/jit-so.exp (one_jit_test): Add testcase name to log message.
Alan Modra [Fri, 25 Nov 2011 23:00:05 +0000 (23:00 +0000)]
daily update
projects / binutils-gdb.git / log