binutils-gdb.git
7 years agoAutomatic date update in version.in
GDB Administrator [Tue, 3 Jan 2017 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoRegen opcodes cgen files
Alan Modra [Mon, 2 Jan 2017 13:27:58 +0000 (23:57 +1030)]
Regen opcodes cgen files

* epiphany-desc.h: Regenerate.
* epiphany-opc.h: Regenerate.
* fr30-desc.h: Regenerate.
* fr30-opc.h: Regenerate.
* frv-desc.h: Regenerate.
* frv-opc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* ip2k-opc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* iq2000-opc.h: Regenerate.
* lm32-desc.h: Regenerate.
* lm32-opc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32c-opc.h: Regenerate.
* m32r-desc.h: Regenerate.
* m32r-opc.h: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.h: Regenerate.
* mt-desc.h: Regenerate.
* mt-opc.h: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-opc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xc16x-opc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
* xstormy16-opc.h: Regenerate.

7 years agoRun more ld tests when not native
Alan Modra [Mon, 2 Jan 2017 12:15:37 +0000 (22:45 +1030)]
Run more ld tests when not native

Many of the ld tests are not run for cross builds, in some cases
because the test needs to run a newly linked executable, and in others
simply because it was easier to write the test for native only.  Even
when a test needs to run, it's good to compile and link to exercise
the linker.  So that's what this patch does.  I've also rid us of
the old ld_link procedure with all the HOSTING_CRT0 etc. setup.  It's
much simpler to just link with $CC.

This does mean that a cross build with cross-compiler installed but
no cross C-library will give lots of failures.  If that turns out to
be too annoying, I guess we can write a tcl procedure to detect it and
not run all the extra tests.

* Makefile.am (bootstrap): Delete rule.
(ld-partial, ld1, ld1-full, ld2, ld3): Likewise.
(HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS, HOSTING_EMU): Likewise.
* configure.ac (HOSTING_CRT0, HOSTING_SCRT0): Don't define.
(HOSTING_LIBS, HOSTING_SLIBS): Likewise.
* configure.host (HOSTING_CRT0, HOSTING_LIBS): Don't define.
* Makefile.in: Regenerate.
* configure: Regenerate.
* testsuite/config/default.exp (get_link_files): Delete.
(HOSTING_CRT0, HOSTING_SCRT0, HOSTING_LIBS, HOSTING_SLIBS): Don't
define.
(ld_simple_link): Delete.
* testsuite/lib/ld-lib.exp (default_ld_link): Delete
(default_ld_simple_link): Rename to default_ld_link.
(ld_simple_link_defsyms): Rename to ld_link_defsyms.
(run_ld_link_tests): Use ld_link, not ld_simple_link.
(run_cc_link_tests): Likewise.
(run_ld_link_exec_tests): Use $CC or $CXX to link, not $ld.
Don't run exe when not native, and return unsupported.
* testsuite/ld-bootstrap/bootstrap.exp: Create gccld1 etc. dirs.
Link ld1 etc. using $CC.
* testsuite/ld-cdtest/cdtest.exp: Link cdtest using $CC.
* testsuite/ld-checks/checks.exp: Use ld_link, not ld_simple_link.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/eh-group.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-fastcall/fastcall.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/binutils.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/assert.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Likewise.
* testsuite/ld-scripts/map-address.exp: Likewise.
* testsuite/ld-scripts/phdrs.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/section-flags.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-sh/sh64/relax.exp: Likewise.
* testsuite/ld-sh/sh64/relfail.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-tic6x/tic6x.exp: Likewise.
* testsuite/ld-undefined/weak-undef.exp: Likewise.
* testsuite/ld-versados/versados.exp: Likewise.
* testsuite/ld-x86-64/dwarfreloc.exp: Likewise.
* testsuite/ld-xtensa/coalesce.exp: Likewise.
* testsuite/ld-xtensa/diff_overflow.exp: Likewise.
* testsuite/ld-xtensa/lcall.exp: Likewise.
* testsuite/ld-elf/audit.exp: Run non-native too.
* testsuite/ld-elf/compress.exp: Likewise.  Replace ld options with
gcc -Wl, options.
* testsuite/ld-elf/dwarf.exp: Run non-native too.  Use ld_link,
not ld_simple_link.  Add -Wl,--no-as-needed to some tests.
* testsuite/ld-elf/elf.exp: Run non-native too.  Formatting.
* testsuite/ld-elf/indirect.exp: Run non-native too.  Add
-Wl,--no-as-needed to most tests.
* testsuite/ld-elf/shared.exp: Run non-native too.  Use braces
to simplify quoting.  Set run_tests using [list] rather than
brace assignment to expand $extralibs.  Add -Wl,--no-as-needed
to many test.  Prefix ld options with -Wl,.
(mix_pic_and_non_pic): Don't run exe if not native.
* testsuite/ld-elf/wrap.exp: Run non-native too.  Add
-Wl,--no-as-needed and prefix ld options with -Wl,.
* testsuite/ld-elfvers/vers.exp: Run non-native too.  Use ld_link,
not ld_simple_link.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
(visibility_test): Don't run exe if not native.
* testsuite/ld-elfweak/elfweak.exp: Run non-native too.  Use ld_link,
not ld_simple_link.
(build_exec): Don't run exe if not native.
* testsuite/ld-ifunc/ifunc.exp: Run non-native too.  Use ld_link,
not ld_simple_link.  Link using $CC.  Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,.  Expect GNU
for hppa-linux even when no ifuncs.  Delete cleanup.
* testsuite/ld-pie/pie.exp: Run non-native too.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.  Use ld_link,
not ld_simple_link.
(shared_test): Don't run exe if not native.
* testsuite/ld-size/size.exp: Run non-native too.  Add
-Wl,--no-as-needed to some tests.  Prefix ld options with -Wl,.
* testsuite/ld-unique/unique.exp: Run non-native too.  Use ld_link,
not ld_simple_link.  Link using $CC.  Add -Wl,--no-as-needed
to some tests and prefix ld options with -Wl,.  Expect GNU
for hppa-linux even when no unique syms.  Delete cleanup.
* testsuite/ld-x86-64/tls.exp: Add -Wl,--no-as-needed to some
tests and prefix ld options with -Wl,.
* testsuite/ld-x86-64/x86-64.exp: Use ld_link, not ld_simple_link.
Add -Wl,--no-as-needed to some tests.  Prefix ld options with -Wl,.

7 years agoSupport -z relro on metag
Alan Modra [Mon, 2 Jan 2017 12:13:15 +0000 (22:43 +1030)]
Support -z relro on metag

* emulparams/elf32metag.sh (COMMONPAGESIZE): Define.

7 years agoSupport -z relro on hppa
Alan Modra [Mon, 2 Jan 2017 12:03:47 +0000 (22:33 +1030)]
Support -z relro on hppa

PR ld/21000
* emulparams/hppalinux.sh (DATA_ADDR, SHLIB_DATA_ADDR): Don't define.
(DATA_SEGMENT_ALIGN, DATA_SEGMENT_END, DATA_SEGMENT_RELRO_END): Define.
* scripttempl/elf.sc: Don't define the above if DATA_SEGMENT_ALIGN
is already defined.

7 years agoDon't make symbols dynamic other than undef weak
Alan Modra [Mon, 2 Jan 2017 12:01:27 +0000 (22:31 +1030)]
Don't make symbols dynamic other than undef weak

Fixes: tmpdir/pr14525: symbol lookup error: tmpdir/pr14525: undefined
symbol: __executable_start
FAIL: PIE PR ld/14525

* elf32-hppa.c (ensure_undef_weak_dynamic): New function.
(allocate_plt_static, allocate_dynrelocs): Use it.

7 years agoSet SHF_INFO_LINK for .PARISC.unwind
Alan Modra [Mon, 2 Jan 2017 11:58:29 +0000 (22:28 +1030)]
Set SHF_INFO_LINK for .PARISC.unwind

This flag should be set for any section header using sh_info to
point to another section.

Fixes a readelf warning about an unexpected value in info field,
resulting in FAIL: Build warn libbar.so

* elf-hppa.h (elf_hppa_fake_sections): Set SHF_INFO_LINK for
.PARISC.unwind section.

7 years agoPR20989, sparc GOT sequence optimisation
Alan Modra [Mon, 2 Jan 2017 11:36:28 +0000 (22:06 +1030)]
PR20989, sparc GOT sequence optimisation

PR ld/20989
* elfxx-sparc.c (gdop_relative_offset_ok): New function.
(_bfd_sparc_elf_relocate_section): Use it to validate GOT
indirect to GOT pointer relative code edit.

7 years agoUpdate year range in copyright notice of all files.
Alan Modra [Mon, 2 Jan 2017 03:36:43 +0000 (14:06 +1030)]
Update year range in copyright notice of all files.

7 years agoChangeLog rotation
Alan Modra [Mon, 2 Jan 2017 03:25:05 +0000 (13:55 +1030)]
ChangeLog rotation

7 years agoAutomatic date update in version.in
GDB Administrator [Mon, 2 Jan 2017 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoupdate copyright year range in GDB files
Joel Brobecker [Sun, 1 Jan 2017 06:50:51 +0000 (10:50 +0400)]
update copyright year range in GDB files

This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.

gdb/ChangeLog:

        Update copyright year range in all GDB files.

7 years agoRotate GDB main ChangeLog for 2017
Joel Brobecker [Sun, 1 Jan 2017 06:39:54 +0000 (10:39 +0400)]
Rotate GDB main ChangeLog for 2017

This patch rotates the GDB main ChangeLog file as per our "Start
of New Year Procedure".

2017-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2016.

7 years agoAutomatic date update in version.in
GDB Administrator [Sun, 1 Jan 2017 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoFix riscv breakage
Alan Modra [Sat, 31 Dec 2016 10:32:35 +0000 (21:02 +1030)]
Fix riscv breakage

* disassemble.c (disassembler): Add break accidentally removed
by PRU patch.

7 years agoCreate sdynrelro for elfn32 mips too
Alan Modra [Sat, 31 Dec 2016 07:55:35 +0000 (18:25 +1030)]
Create sdynrelro for elfn32 mips too

* elfn32-mips.c (elf_backend_want_dynrelro): Define.

7 years agoPRU LD Port
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:49 +0000 (12:39 +0200)]
PRU LD Port

* NEWS: Mention new PRU target.
* Makefile.am: Add PRU target.
* configure.tgt: Ditto.
* emulparams/pruelf.sh: New file.
* emultempl/pruelf.em: New file.
* scripttempl/pru.sc: New file.
* Makefile.in: Regenerate.
* testsuite/ld-pru/emit-relocs-1.d: New PRU testcase file.
* testsuite/ld-pru/emit-relocs-1.ld: Ditto.
* testsuite/ld-pru/emit-relocs-1a.s: Ditto.
* testsuite/ld-pru/emit-relocs-1b.s
* testsuite/ld-pru/ldi32.d: Ditto.
* testsuite/ld-pru/ldi32.s: Ditto.
* testsuite/ld-pru/ldi32_symbol.s: Ditto.
* testsuite/ld-pru/norelax_ldi32-data.d: Ditto.
* testsuite/ld-pru/norelax_ldi32-dis.d: Ditto.
* testsuite/ld-pru/pcrel_s10.d: Ditto.
* testsuite/ld-pru/pcrel_s10.s: Ditto.
* testsuite/ld-pru/pcrel_s10_label.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal2.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal2.s: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal3.d: Ditto.
* testsuite/ld-pru/pcrel_u8-illegal3.s: Ditto.
* testsuite/ld-pru/pcrel_u8.d: Ditto.
* testsuite/ld-pru/pcrel_u8.s: Ditto.
* testsuite/ld-pru/pcrel_u8_label.s: Ditto.
* testsuite/ld-pru/pmem.d: Ditto.
* testsuite/ld-pru/pmem.s: Ditto.
* testsuite/ld-pru/pmem_symbol.s: Ditto.
* testsuite/ld-pru/pru.exp: Ditto.
* testsuite/ld-pru/relax_ldi32-data.d: Ditto.
* testsuite/ld-pru/relax_ldi32-dis.d: Ditto.
* testsuite/ld-pru/relax_ldi32.s: Ditto.
* testsuite/ld-pru/relax_ldi32_symbol.s: Ditto.
* testsuite/ld-pru/reloc.d: Ditto.
* testsuite/ld-pru/reloc.s: Ditto.
* testsuite/ld-pru/reloc_symbol.s: Ditto.
* testsuite/ld-pru/u16.d: Ditto.
* testsuite/ld-pru/u16.s: Ditto.
* testsuite/ld-pru/u16_symbol.s: Ditto.

PRU does not export __end symbol because it is ambiguous for it.
Users are expected to use instead the section markers __text_end,
__data_end, __bss_end or __noinit_end.

* testsuite/lib/ld-lib.exp (check_shared_lib_support): No shared
libraries are supported for PRU.
(check_gc_sections_available): Mark PRU as not supported.
* testsuite/ld-elf/eh-frame-hdr.d: Disable for PRU.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr14926.d: Likewise.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Mark sec64k case as too big for PRU.
* testsuite/ld-srec/srec.exp (run_srec_test): Add setup for PRU.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoPRU GAS Port
Dimitar Dimitrov [Tue, 27 Dec 2016 20:43:38 +0000 (22:43 +0200)]
PRU GAS Port

* NEWS: Mention new PRU target.
* Makefile.am: Add PRU target.
* config/obj-elf.c: Ditto.
* configure.tgt: Ditto.
* config/tc-pru.c: New file.
* config/tc-pru.h: New file.
* doc/Makefile.am: Add documentation for PRU GAS port.
* doc/all.texi, Ditto.
* doc/as.texinfo: Ditto.
* doc/c-pru.texi: Document PRU GAS options.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
* testsuite/gas/pru/alu.d: New file for PRU GAS testsuite.
* testsuite/gas/pru/alu.s: Ditto.
* testsuite/gas/pru/branch.d: Ditto.
* testsuite/gas/pru/branch.s: Ditto.
* testsuite/gas/pru/illegal.l: Ditto.
* testsuite/gas/pru/illegal.s: Ditto.
* testsuite/gas/pru/ldi.d: Ditto.
* testsuite/gas/pru/ldi.s: Ditto.
* testsuite/gas/pru/ldst.d: Ditto.
* testsuite/gas/pru/ldst.s: Ditto.
* testsuite/gas/pru/loop.d: Ditto.
* testsuite/gas/pru/loop.s: Ditto.
* testsuite/gas/pru/misc.d: Ditto.
* testsuite/gas/pru/misc.s: Ditto.
* testsuite/gas/pru/pru.exp: Ditto.
* testsuite/gas/pru/pseudo.d: Ditto.
* testsuite/gas/pru/pseudo.s: Ditto.
* testsuite/gas/pru/warn_reglabel.l: Ditto.
* testsuite/gas/pru/warn_reglabel.s: Ditto.
* testsuite/gas/pru/xfr.d: Ditto.
* testsuite/gas/pru/xfr.s: Ditto.
* testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoPRU Binutils port
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:47 +0000 (12:39 +0200)]
PRU Binutils port

* readelf.c (guess_is_rela): Add EM_TI_PRU.
(dump_relocations): Invoke elf_pru_reloc_type.
(get_machine_name): Handle EM_TI_PRU.
(is_32bit_abs_reloc): Handle R_PRU_BFD_RELOC_32.
(is_16bit_abs_reloc): Handle R_PRU_BFD_RELOC_16.
(is_none_reloc): Handle PRU_NONE and PRU_DIFF variants.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoPRU Opcode Port
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:50 +0000 (12:39 +0200)]
PRU Opcode Port

opcodes/
* Makefile.am: Add PRU source files.
* configure.ac: Add PRU target.
* disassemble.c (disassembler): Register PRU arch.
* pru-dis.c: New file.
* pru-opc.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoPRU BFD support
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:46 +0000 (12:39 +0200)]
PRU BFD support

include/
* elf/common.h: Add PRU ELF.
* elf/pru.h: New file.
* opcode/pru.h: New file.
* dis-asm.h (print_insn_pru): Declare.
bfd/
* archures.c: Add bfd_arch_pru.
* Makefile.am: Add PRU target.
* config.bfd: Ditto.
* configure.ac: Ditto.
* elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA.
* targets.c: Add pru_elf32_vec.
* reloc.c: Add PRU relocations.
* cpu-pru.c: New file.
* elf32-pru.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
* bfd-in2.h: Regenerate
* libbfd.h: Regenerate.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoAdd PRU ELF ID to elfcpp
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:51 +0000 (12:39 +0200)]
Add PRU ELF ID to elfcpp

* elfcpp.h (enum EM): Add EM_TI_PRU.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agold testsuite: Sanitize output from ld
Dimitar Dimitrov [Fri, 30 Dec 2016 10:39:59 +0000 (12:39 +0200)]
ld testsuite: Sanitize output from ld

Leading dashes from an LD error message confuse send_log, because the
string is taken to be an option.

This patch fixes the following DejaGnu error:

  --defsym:1: undefined symbol `foo2' referenced in expression
  failed with: <--defsym:1: undefined symbol `foo2' referenced in expression>, no expected output
  ERROR: tcl error sourcing .../ld/testsuite/ld-gc/gc.exp.
  ERROR: usage: send [args] string
      while executing
  "send_log "$comp_output\n""
      (procedure "run_dump_test" line 376)

* testsuite/lib/ld-lib.exp (run_dump_test): Pass -- to send_log.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
7 years agoImport config.sub
Alan Modra [Fri, 30 Dec 2016 05:57:54 +0000 (16:27 +1030)]
Import config.sub

* config.sub: Import from upstream.

7 years agoAutomatic date update in version.in
GDB Administrator [Sat, 31 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoAutomatic date update in version.in
GDB Administrator [Fri, 30 Dec 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoReturn 'int' rather than 'unsigned short' in avrdis_opcode
Yao Qi [Thu, 29 Dec 2016 15:47:40 +0000 (15:47 +0000)]
Return 'int' rather than 'unsigned short' in avrdis_opcode

avrdis_opcode return type is unsigned short, but -1 at the end of
this function is returned.  Additionally, print_insn_avr doesn't
handle when -1 (in case of memory error) is returned from
avrdis_opcode.

This patch changes avrdis_opcode returning int indicating the error,
and adds a new argument for instruction we got on success.  The
opcode is 16-bit, so I change local variables type to uint16_t,
and include "bfd_stdint.h" as a result.  On memory error,
print_insn_avr returns -1, which is a common convention among most
of print_insn_$ARCH functions.

opcodes:

2016-12-29  Yao Qi  <yao.qi@linaro.org>

* avr-dis.c: Include "bfd_stdint.h"
(avrdis_opcode): Change return type to int, add argument
insn.  Set *INSN on success.
(print_insn_avr): Check return value of avrdis_opcode, and
return -1 on error.

7 years agolink_hash_copy_indirect and symbol flags
Alan Modra [Thu, 29 Dec 2016 12:19:41 +0000 (22:49 +1030)]
link_hash_copy_indirect and symbol flags

A while ago HJ fixed PR ld/18720 with commit 6e33951ed, which, among
other things, modified _bfd_elf_link_hash_copy_indirect to not copy
ref_dynamic, ref_regular, ref_regular_nonweak, non_got_ref, needs_plt
and pointer_equality_needed when setting up an indirect non-versioned
symbol pointing to a non-default versioned symbol.  I didn't notice at
the time, but the pr18720 testcase fails on hppa-linux with
"internal error, aborting at binutils-gdb-2.28/bfd/elf32-hppa.c:3933
in elf32_hppa_relocate_section".

Now hppa-linux creates entries in the plt even for local functions, if
they are referenced using plabel (function pointer) relocations.   So
needs_plt is set for foo when processing pr18720a.o.  When the aliases
in pr28720b.o are processed, we get an indirection from foo to
foo@FOO, but don't copy needs_plt.  Since foo@FOO is the "real" symbol
that is used after that point, no plt entry is made for foo and we
bomb when relocating the plabel.

As shown by the hppa-linux scenario, needs_plt should be copied even
for non-default versioned symbols.  I believe all of the others ought
to be copied too, with the exception of ref_dynamic.  Not copying
ref_dynamic is right because if a shared lib references "foo" it
should not be satisfied by any non-default version "foo@FOO".

* elflink.c (_bfd_elf_link_hash_copy_indirect): Only omit
copying one flag, ref_dynamic, when versioned_hidden.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_copy_indirect_symbol): Use same
logic for copying weakdef flags.  Copy plabel flag and merge
tls_type.
* elf32-i386.c (elf_i386_copy_indirect_symbol): Use same logic
for copying weakdef flags.
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Likewise.
* elf32-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elf32-sh.c (sh_elf_copy_indirect_symbol): Likewise.
* elf64-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elfnn-ia64.c (elfNN_ia64_hash_copy_indirect): Likewise.
* elf64-x86-64.c (elf_x86_64_copy_indirect_symbol): Likewise.
Simplify.

7 years agoAutomatic date update in version.in
GDB Administrator [Thu, 29 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoFix comment typo
Andreas Schwab [Wed, 28 Dec 2016 17:28:22 +0000 (18:28 +0100)]
Fix comment typo

* copy-relocs.h: Fix comment typo.

7 years agoAdd explicit instantiations for build_compressed_section_map().
Cary Coutant [Wed, 28 Dec 2016 16:29:43 +0000 (08:29 -0800)]
Add explicit instantiations for build_compressed_section_map().

gold/
PR gold/20996
* object.cc (build_compressed_section_map): Add explicit instantiations.

7 years agoFix last ChangeLog entry.
Cary Coutant [Wed, 28 Dec 2016 16:22:59 +0000 (08:22 -0800)]
Fix last ChangeLog entry.

* copy-relocs.cc (Copy_relocs::make_copy_reloc): Use .data.rel.ro for
read-only data when linking with -z relro.

7 years agoCheck bfd support for bfd_mips_elf_get_abiflags in mips make rule
Alan Modra [Wed, 28 Dec 2016 11:29:34 +0000 (21:59 +1030)]
Check bfd support for bfd_mips_elf_get_abiflags in mips make rule

The previous scheme with a dependency in opcodes on libbfd.la
broke "make distclean".

* configure.ac: Revert 2016-12-23.
* Makefile.am: Likewise.
(MIPS_DEFS): Define.
(mips-dis.lo): Add rule.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.

7 years agoUse dynrelro for symbols in relro sections too
Alan Modra [Wed, 28 Dec 2016 06:34:15 +0000 (17:04 +1030)]
Use dynrelro for symbols in relro sections too

PR ld/20995
bfd/
* elflink.c (elf_link_add_object_symbols): Mark relro sections
in dynamic objects SEC_READONLY.
ld/
* testsuite/ld-elf/pr20995c.s: New test file.
* testsuite/ld-elf/pr20995-2so.r: Likewise.
* testsuite/ld-elf/elf.exp: Run it.

7 years agoPlace copy relocations in .dynbss when target is read-only.
Cary Coutant [Wed, 28 Dec 2016 04:50:47 +0000 (20:50 -0800)]
Place copy relocations in .dynbss when target is read-only.

gold/
PR ld/20995
* copy-relocs.cc (Copy_relocs::make_copy_reloc): Use .dynbss for
read-only data when linking with -z relro.
* copy-relocs.h (Copy_relocs::dynrelro_): New data member.
* testsuite/Makefile.am (copy_test_relro): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/copy_test_relro.cc: New source file.
* testsuite/copy_test_relro_1.cc: New source file.

7 years agoAutomatic date update in version.in
GDB Administrator [Wed, 28 Dec 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoAutomatic date update in version.in
GDB Administrator [Tue, 27 Dec 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agodynrelro section for read-only dynamic symbols copied into executable
Alan Modra [Sun, 25 Dec 2016 14:00:45 +0000 (00:30 +1030)]
dynrelro section for read-only dynamic symbols copied into executable

Variables defined in shared libraries are copied into an executable's
.bss section when code in the executable is non-PIC and thus would
require dynamic text relocations to access the variable directly in
the shared library.  Recent x86 toolchains also copy variables into
the executable to gain a small speed improvement.

The problem is that if the variable was originally read-only, the copy
in .bss is writable, potentially opening a security hole.  This patch
cures that problem by putting the copy in a section that becomes
read-only after ld.so relocation, provided -z relro is in force.

The patch also fixes a microblaze linker segfault on attempting to
use dynamic bss variables.

bfd/
PR ld/20995
* elf-bfd.h (struct elf_link_hash_table): Add sdynrelro and
sreldynrelro.
(struct elf_backend_data): Add want_dynrelro.
* elfxx-target.h (elf_backend_want_dynrelro): Define.
(elfNN_bed): Update initializer.
* elflink.c (_bfd_elf_create_dynamic_sections): Create
sdynrelro and sreldynrelro sections.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Place variables
copied into the executable from read-only sections into sdynrelro.
(elf32_arm_size_dynamic_sections): Handle sdynrelro.
(elf32_arm_finish_dynamic_symbol): Select sreldynrelro for
dynamic relocs in sdynrelro.
(elf_backend_want_dynrelro): Define.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol)
(elf32_hppa_size_dynamic_sections, elf32_hppa_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol)
(elf_i386_size_dynamic_sections, elf_i386_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol)
(elf_metag_size_dynamic_sections, elf_metag_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol)
(microblaze_elf_size_dynamic_sections)
(microblaze_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol)
(nios2_elf32_adjust_dynamic_symbol)
(nios2_elf32_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol)
(or1k_elf_adjust_dynamic_symbol, or1k_elf_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol)
(ppc_elf_size_dynamic_sections, ppc_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol)
(elf32_tic6x_size_dynamic_sections)
(elf32_tic6x_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tilepro.c (tilepro_elf_adjust_dynamic_symbol)
(tilepro_elf_size_dynamic_sections)
(tilepro_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol)
(ppc64_elf_size_dynamic_sections, ppc64_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol)
(elf_x86_64_size_dynamic_sections)
(elf_x86_64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol)
(elfNN_aarch64_size_dynamic_sections)
(elfNN_aarch64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol)
(riscv_elf_size_dynamic_sections, riscv_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol)
(_bfd_mips_elf_size_dynamic_sections)
(_bfd_mips_vxworks_finish_dynamic_symbol): As above.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol)
(_bfd_sparc_elf_size_dynamic_sections)
(_bfd_sparc_elf_finish_dynamic_symbol): As above.
* elfxx-tilegx.c (tilegx_elf_adjust_dynamic_symbol)
(tilegx_elf_size_dynamic_sections)
(tilegx_elf_finish_dynamic_symbol): As above.
* elf32-mips.c (elf_backend_want_dynrelro): Define.
* elf64-mips.c (elf_backend_want_dynrelro): Define.
* elf32-sparc.c (elf_backend_want_dynrelro): Define.
* elf64-sparc.c (elf_backend_want_dynrelro): Define.
* elf32-tilegx.c (elf_backend_want_dynrelro): Define.
* elf64-tilegx.c (elf_backend_want_dynrelro): Define.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Tidy.
(microblaze_elf_size_dynamic_sections): Handle sdynbss.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Make use
of linker shortcuts to dynamic sections rather than comparing
names.  Correctly set "got" flag.
ld/
PR ld/20995
* testsuite/ld-arm/farcall-mixed-app-v5.d: Update to suit changed
stub hash table traversal caused by section id increment.  Accept
the previous output too.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib.d: Likewise.
* testsuite/ld-elf/pr20995a.s, * testsuite/ld-elf/pr20995b.s,
* testsuite/ld-elf/pr20995.r: New test.
* testsuite/ld-elf/elf.exp: Run it.

7 years agoPut .dynbss and .rel.bss shortcuts in main elf hash table
Alan Modra [Sun, 25 Dec 2016 13:51:06 +0000 (00:21 +1030)]
Put .dynbss and .rel.bss shortcuts in main elf hash table

Also, create .rel{,a}.bss for PIEs on all targets, not just x86.

* elf-bfd.h (struct elf_link_hash_table): Add sdynbss and srelbss.
* elflink.c (_bfd_elf_create_dynamic_sections): Set them.  Create
.rel.bss/.rela.bss for executables, both PIE and non-PIE.
* elf32-arc.c (struct elf_arc_link_hash_table): Delete srelbss.
Use ELF hash table var throughout.
* elf32-arm.c (struct elf32_arm_link_hash_table): Delete sdynbss
and srelbss.  Use ELF hash table vars throughout.
* elf32-hppa.c (struct elf32_hppa_link_hash_table): Likewise.
* elf32-i386.c (struct elf_i386_link_hash_table): Likewise.
* elf32-metag.c (struct elf_metag_link_hash_table): Likewise.
* elf32-microblaze.c (struct elf32_mb_link_hash_table): Likewise.
* elf32-nios2.c (struct elf32_nios2_link_hash_table): Likewise.
* elf32-or1k.c (struct elf_or1k_link_hash_table): Likewise.
* elf32-ppc.c (struct ppc_elf_link_hash_table): Likewise.
* elf32-s390.c (struct elf_s390_link_hash_table): Likewise.
* elf32-tic6x.c (struct elf32_tic6x_link_hash_table): Likewise.
* elf32-tilepro.c (struct tilepro_elf_link_hash_table): Likewise.
* elf64-ppc.c (struct ppc_link_hash_table): Likewise.
* elf64-s390.c (struct elf_s390_link_hash_table): Likewise.
* elf64-x86-64.c (struct elf_x86_64_link_hash_table): Likewise.
* elfnn-aarch64.c (struct elf_aarch64_link_hash_table): Likewise.
* elfnn-riscv.c (struct riscv_elf_link_hash_table): Likewise.
* elfxx-mips.c (struct mips_elf_link_hash_table): Likewise.
* elfxx-sparc.h (struct _bfd_sparc_elf_link_hash_table): Likewise.
* elfxx-sparc.c: Likewise.
* elfxx-tilegx.c (struct tilegx_elf_link_hash_table): Likewise.

* elf32-arc.c (arc_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-microblaze.c (microblaze_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-or1k.c (or1k_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-s390.c (elf_s390_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf64-ppc.c (ppc64_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf64-s390.c (elf_s390_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.

* elf32-tilepro.c (tilepro_elf_create_dynamic_sections): Remove
extraneous tests.
* elfnn-aarch64.c (elfNN_aarch64_create_dynamic_sections): Likewise.
* elfxx-mips.c (_bfd_mips_elf_create_dynamic_sections): Likewise.
* elfxx-tilegx.c (tilegx_elf_create_dynamic_sections): Likewise.

* elf32-i386.c (elf_i386_create_dynamic_sections): Don't create
".rel.bss" for executables.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Don't create
".rela.bss" for executables.
* elf32-nios2.c (nios2_elf32_create_dynamic_sections): Don't
ignore return status from _bfd_elf_create_dynamic_sections.

7 years agoCorrect .dynbss in script
Alan Modra [Sun, 25 Dec 2016 23:10:58 +0000 (09:40 +1030)]
Correct .dynbss in script

The only target that renames .bss is tic6x, turning .bss into .far,
and .sbss into .bss.  .dynbss is not renamed to .dynfar by BFD.

* scripttempl/elf.sc: Don't use $BSS_NAME in .dynbss.

7 years agoAutomatic date update in version.in
GDB Administrator [Mon, 26 Dec 2016 00:00:32 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoAutomatic date update in version.in
GDB Administrator [Sun, 25 Dec 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoAutomatic date update in version.in
GDB Administrator [Sat, 24 Dec 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoMIPS/BFD: Remove EI_ABIVERSION 5 allocation for PT_GNU_STACK support
Maciej W. Rozycki [Fri, 23 Dec 2016 20:03:36 +0000 (20:03 +0000)]
MIPS/BFD: Remove EI_ABIVERSION 5 allocation for PT_GNU_STACK support

Revert commit 17733f5be961 ("Increment the ABIVERSION to 5 for MIPS
objects with non-executable stacks.") and remove EI_ABIVERSION 5
allocation for PT_GNU_STACK support, which has not made it to glibc
and will be reassigned.

bfd/
* bfd/elfxx-mips.c (_bfd_mips_post_process_headers): Revert
2016-02-23 change and remove EI_ABIVERSION 5 support.

7 years agoMIPS16: Add ASMACRO instruction support
Maciej W. Rozycki [Fri, 23 Dec 2016 19:40:51 +0000 (19:40 +0000)]
MIPS16: Add ASMACRO instruction support

Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.

[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS32 Architecture", MIPS
    Technologies, Inc., Document Number: MD00076, Revision 2.63, July
    16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65

[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS64 Architecture", MIPS
    Technologies, Inc., Document Number: MD00077, Revision 2.60, June
    25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66

include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.

opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.

binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.

gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

7 years agoMIPS16: Simplify extended operand handling
Maciej W. Rozycki [Fri, 23 Dec 2016 19:40:09 +0000 (19:40 +0000)]
MIPS16: Simplify extended operand handling

Simplify extended operand handling and only specially process immediates
which require bit shuffling, using the generic operand insertion and
extraction handlers for the '<' (5-bit shift amount) operand code in
particular.  Require the least significant bit of all extended operand
forms to be (artificially) set to 0 for their special processing to
trigger.

gas/
* config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend'
use to operands whose LSB position is zero.

opcodes/
* mips-dis.c (print_mips16_insn_arg): Simplify processing of
extended operands.
* mips16-opc.c (decode_mips16_operand): Switch the extended
form of the `<' operand type to LSB position 22.

7 years agoMIPS16/GAS: Clean up invalid unextended operand handling
Maciej W. Rozycki [Fri, 23 Dec 2016 18:06:55 +0000 (18:06 +0000)]
MIPS16/GAS: Clean up invalid unextended operand handling

Bail out right away when an unextended instruction encoding is required
either with the use of a `.t' suffix or by means of `.set noautoextend',
however an operand supplied requires the extended instruction form to be
used.

This is to avoid messing up with the internal state of the assembler,
even though no actual failures are known to happen as a result.  Add
test cases for the situation concerned.

gas/
* config/tc-mips.c (match_mips16_insn): Don't update
`forced_insn_length' or the instruction opcode if an operand
requires an extended instruction form, but an unextended one
has been requested.
* testsuite/gas/mips/mips16-relax-unextended-1.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-2.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-1.s: New test
source.
* testsuite/gas/mips/mips16-relax-unextended-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.

7 years agoMIPS16: Reassign `0' and `4' operand codes
Maciej W. Rozycki [Fri, 23 Dec 2016 17:05:01 +0000 (17:05 +0000)]
MIPS16: Reassign `0' and `4' operand codes

Replace `0' and `4' operand codes with `.' and `F' respectively to free
up the `0'-`4' consecutive range.  No functional change.

gas/
* config/tc-mips.c (mips16_macro_build): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_macro): Likewise.

include/
* opcode/mips.h: Replace `0' and `4' operand codes with `.' and
`F' respectively.

opcodes/
* mips16-opc.c (decode_mips16_operand): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_opcodes): Likewise.

7 years agoMIPS16: Handle non-extensible instructions correctly
Maciej W. Rozycki [Fri, 23 Dec 2016 16:49:42 +0000 (16:49 +0000)]
MIPS16: Handle non-extensible instructions correctly

Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.

According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].

Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.

References:

[1] "Product Description, MIPS16 Application-Specific Extension",
    Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
    Instruction Set Summary", p. 5

[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10

[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS32 Architecture", MIPS
    Technologies, Inc., Document Number: MD00076, Revision 2.63, July
    16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39

[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49

[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS64 Architecture", MIPS
    Technologies, Inc., Document Number: MD00077, Revision 2.60, June
    25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41

[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51

include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.

gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".

binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.

7 years agoMIPS16: Remove "extended" BREAK/SDBBP handling
Maciej W. Rozycki [Fri, 23 Dec 2016 12:42:56 +0000 (12:42 +0000)]
MIPS16: Remove "extended" BREAK/SDBBP handling

Remove special casing for the `6' operand code used for the embedded
trap code of the BREAK and the SDBBP instructions to support supposedly
extended forms of these instructions.

According to all versions of the MIPS16 ASE specifications these
instructions are not extensible [1][2][3][4][5][7][8][10][11], and as
from revision 2.50 of the MIPS16e ASE specifications it has been further
clarified what was previously implied, that non-extesiable instructions
when preceded with an EXTEND prefix must cause a Reserved Instruction
exception [5][6][9][10].

Therefore supposedly extended BREAK and SDBBP instructions do not serve
their purpose anymore as they do not cause a Bp and a Debug exception
respectively and supporting these forms in disassembly only causes
confusion.

References:

[1] "Product Description, MIPS16 Application-Specific Extension",
    Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
    Instruction Set Summary", p. 5

[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10

[3] same, Table 18. "Extendable MIPS16 Instructions", p. 24

[4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS32 Architecture", MIPS
    Technologies, Inc., Document Number: MD00076, Revision 2.63, July
    16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38

[5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41

[6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41

[7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49

[8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS64 Architecture", MIPS
    Technologies, Inc., Document Number: MD00077, Revision 2.60, June
    25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39

[9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42

[10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43

[11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50

gas/
* config/tc-mips.c (match_mips16_insn): Remove the `6' operand
code special case and its associated comment.

opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Remove extended
encoding support.

7 years agoMIPS16/GAS: Fix forced size suffixes with argumentless instructions
Maciej W. Rozycki [Fri, 23 Dec 2016 12:38:35 +0000 (12:38 +0000)]
MIPS16/GAS: Fix forced size suffixes with argumentless instructions

Correct the handling of `.e' and `.t' instruction size suffixes with
instruction mnemonics which are not followed by any text on the same
line, such as arguments or white space, e.g.:

$ cat test.s
.set mips16
foo:
entry.t # comment
entry.t
exit.t # comment
exit.t
nop.t # comment
nop.t
$ as -32 -o test.o test.s
test.s: Assembler messages:
test.s:4: Error: unrecognized opcode `entry.t'
test.s:6: Error: unrecognized opcode `exit.t'
test.s:8: Error: unrecognized opcode `nop.t'
$

gas/
* config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction
suffixes followed by a null character rather than a space too.
* testsuite/gas/mips/mips16-insn-length-noargs.d: New test.
* testsuite/gas/mips/mips16-insn-length-noargs.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new test.

7 years agoMIPS16/GAS: Disallow EXTEND delay-slot scheduling
Maciej W. Rozycki [Fri, 23 Dec 2016 12:37:40 +0000 (12:37 +0000)]
MIPS16/GAS: Disallow EXTEND delay-slot scheduling

Do not allow any explicitly coded EXTEND instruction to be automatically
scheduled into a jump delay slot, as an EXTEND prefix is coupled with
the next regular MIPS16 instruction and therefore swapping it with a
jump would change program's semantics; EXTEND is not architecturally
allowed to be present in a jump delay slot anyway.

opcodes/
* mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for
"extend".

gas/
* testsuite/gas/mips/mips16-extend-swap.d: New test.
* testsuite/gas/mips/mips16-extend-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.

7 years agoopcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFD
Maciej W. Rozycki [Fri, 23 Dec 2016 12:11:12 +0000 (12:11 +0000)]
opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFD

Fix a regression introduced with commit 5e7fc731f80e ("MIPS/opcodes:
Also set disassembler's ASE flags from ELF structures"), further updated
with commit 4df995c77118 ("MIPS/opcodes: Also set disassembler's ASE
flags from ELF structures"), and use autoconf to check for the presence
of `bfd_mips_elf_get_abiflags' in BFD.

opcodes/
* mips-dis.c (set_default_mips_dis_options): Use
HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the
call to `bfd_mips_elf_get_abiflags'.
* configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.

7 years agoFix more cases of improper test names
Luis Machado [Fri, 23 Dec 2016 16:52:18 +0000 (10:52 -0600)]
Fix more cases of improper test names

I noticed more occurrences of improper test names. The rather mechanical,
tedious and large patch below addresses, hopefully, most of the leftover cases.

As usual, another pair of eyes is welcome to check if missed something or did
an invalid substitution.

This patch also fixes the prepare_for_testing calls to pass proper test names.

gdb/testsuite/ChangeLog:

2016-12-23  Luis Machado  <lgustavo@codesourcery.com>

Fix test names for the following files:

* gdb.ada/exec_changed.exp
* gdb.ada/info_types.exp
* gdb.arch/aarch64-atomic-inst.exp
* gdb.arch/aarch64-fp.exp
* gdb.arch/altivec-abi.exp
* gdb.arch/altivec-regs.exp
* gdb.arch/amd64-byte.exp
* gdb.arch/amd64-disp-step.exp
* gdb.arch/amd64-dword.exp
* gdb.arch/amd64-entry-value-inline.exp
* gdb.arch/amd64-entry-value-param.exp
* gdb.arch/amd64-entry-value-paramref.exp
* gdb.arch/amd64-entry-value.exp
* gdb.arch/amd64-i386-address.exp
* gdb.arch/amd64-invalid-stack-middle.exp
* gdb.arch/amd64-invalid-stack-top.exp
* gdb.arch/amd64-optimout-repeat.exp
* gdb.arch/amd64-prologue-skip.exp
* gdb.arch/amd64-prologue-xmm.exp
* gdb.arch/amd64-stap-special-operands.exp
* gdb.arch/amd64-stap-wrong-subexp.exp
* gdb.arch/amd64-tailcall-cxx.exp
* gdb.arch/amd64-tailcall-noret.exp
* gdb.arch/amd64-tailcall-ret.exp
* gdb.arch/amd64-tailcall-self.exp
* gdb.arch/amd64-word.exp
* gdb.arch/arm-bl-branch-dest.exp
* gdb.arch/arm-disp-step.exp
* gdb.arch/arm-neon.exp
* gdb.arch/arm-single-step-kernel-helper.exp
* gdb.arch/avr-flash-qualifier.exp
* gdb.arch/disp-step-insn-reloc.exp
* gdb.arch/e500-abi.exp
* gdb.arch/e500-regs.exp
* gdb.arch/ftrace-insn-reloc.exp
* gdb.arch/i386-avx512.exp
* gdb.arch/i386-bp_permanent.exp
* gdb.arch/i386-byte.exp
* gdb.arch/i386-cfi-notcurrent.exp
* gdb.arch/i386-disp-step.exp
* gdb.arch/i386-dr3-watch.exp
* gdb.arch/i386-float.exp
* gdb.arch/i386-gnu-cfi.exp
* gdb.arch/i386-mpx-map.exp
* gdb.arch/i386-mpx-sigsegv.exp
* gdb.arch/i386-mpx-simple_segv.exp
* gdb.arch/i386-mpx.exp
* gdb.arch/i386-permbkpt.exp
* gdb.arch/i386-prologue.exp
* gdb.arch/i386-signal.exp
* gdb.arch/i386-size-overlap.exp
* gdb.arch/i386-unwind.exp
* gdb.arch/i386-word.exp
* gdb.arch/mips-fcr.exp
* gdb.arch/powerpc-d128-regs.exp
* gdb.arch/powerpc-stackless.exp
* gdb.arch/ppc64-atomic-inst.exp
* gdb.arch/s390-stackless.exp
* gdb.arch/s390-tdbregs.exp
* gdb.arch/s390-vregs.exp
* gdb.arch/sparc-sysstep.exp
* gdb.arch/thumb-bx-pc.exp
* gdb.arch/thumb-singlestep.exp
* gdb.arch/thumb2-it.exp
* gdb.arch/vsx-regs.exp
* gdb.asm/asm-source.exp
* gdb.base/a2-run.exp
* gdb.base/advance.exp
* gdb.base/all-bin.exp
* gdb.base/anon.exp
* gdb.base/args.exp
* gdb.base/arithmet.exp
* gdb.base/async-shell.exp
* gdb.base/async.exp
* gdb.base/attach-pie-noexec.exp
* gdb.base/attach-twice.exp
* gdb.base/auto-load.exp
* gdb.base/bang.exp
* gdb.base/bitfields.exp
* gdb.base/break-always.exp
* gdb.base/break-caller-line.exp
* gdb.base/break-entry.exp
* gdb.base/break-inline.exp
* gdb.base/break-on-linker-gcd-function.exp
* gdb.base/break-probes.exp
* gdb.base/break.exp
* gdb.base/breakpoint-shadow.exp
* gdb.base/call-ar-st.exp
* gdb.base/call-sc.exp
* gdb.base/call-signal-resume.exp
* gdb.base/call-strs.exp
* gdb.base/callfuncs.exp
* gdb.base/catch-fork-static.exp
* gdb.base/catch-gdb-caused-signals.exp
* gdb.base/catch-load.exp
* gdb.base/catch-signal-fork.exp
* gdb.base/catch-signal.exp
* gdb.base/catch-syscall.exp
* gdb.base/charset.exp
* gdb.base/checkpoint.exp
* gdb.base/chng-syms.exp
* gdb.base/code-expr.exp
* gdb.base/code_elim.exp
* gdb.base/commands.exp
* gdb.base/completion.exp
* gdb.base/complex.exp
* gdb.base/cond-expr.exp
* gdb.base/condbreak.exp
* gdb.base/consecutive.exp
* gdb.base/continue-all-already-running.exp
* gdb.base/coredump-filter.exp
* gdb.base/corefile.exp
* gdb.base/dbx.exp
* gdb.base/debug-expr.exp
* gdb.base/define.exp
* gdb.base/del.exp
* gdb.base/disabled-location.exp
* gdb.base/disasm-end-cu.exp
* gdb.base/disasm-optim.exp
* gdb.base/display.exp
* gdb.base/duplicate-bp.exp
* gdb.base/ena-dis-br.exp
* gdb.base/ending-run.exp
* gdb.base/enumval.exp
* gdb.base/environ.exp
* gdb.base/eu-strip-infcall.exp
* gdb.base/eval-avoid-side-effects.exp
* gdb.base/eval-skip.exp
* gdb.base/exitsignal.exp
* gdb.base/expand-psymtabs.exp
* gdb.base/filesym.exp
* gdb.base/find-unmapped.exp
* gdb.base/finish.exp
* gdb.base/float.exp
* gdb.base/foll-exec-mode.exp
* gdb.base/foll-exec.exp
* gdb.base/foll-fork.exp
* gdb.base/fortran-sym-case.exp
* gdb.base/freebpcmd.exp
* gdb.base/func-ptr.exp
* gdb.base/func-ptrs.exp
* gdb.base/funcargs.exp
* gdb.base/gcore-buffer-overflow.exp
* gdb.base/gcore-relro-pie.exp
* gdb.base/gcore-relro.exp
* gdb.base/gcore.exp
* gdb.base/gdb1090.exp
* gdb.base/gdb11530.exp
* gdb.base/gdb11531.exp
* gdb.base/gdb1821.exp
* gdb.base/gdbindex-stabs.exp
* gdb.base/gdbvars.exp
* gdb.base/hbreak.exp
* gdb.base/hbreak2.exp
* gdb.base/included.exp
* gdb.base/infcall-input.exp
* gdb.base/inferior-died.exp
* gdb.base/infnan.exp
* gdb.base/info-macros.exp
* gdb.base/info-os.exp
* gdb.base/info-proc.exp
* gdb.base/info-shared.exp
* gdb.base/info-target.exp
* gdb.base/infoline.exp
* gdb.base/interp.exp
* gdb.base/interrupt.exp
* gdb.base/jit-reader.exp
* gdb.base/jit-simple.exp
* gdb.base/kill-after-signal.exp
* gdb.base/kill-detach-inferiors-cmd.exp
* gdb.base/label.exp
* gdb.base/langs.exp
* gdb.base/ldbl_e308.exp
* gdb.base/line-symtabs.exp
* gdb.base/linespecs.exp
* gdb.base/list.exp
* gdb.base/long_long.exp
* gdb.base/longest-types.exp
* gdb.base/maint.exp
* gdb.base/max-value-size.exp
* gdb.base/memattr.exp
* gdb.base/mips_pro.exp
* gdb.base/morestack.exp
* gdb.base/moribund-step.exp
* gdb.base/multi-forks.exp
* gdb.base/nested-addr.exp
* gdb.base/nextoverexit.exp
* gdb.base/noreturn-finish.exp
* gdb.base/noreturn-return.exp
* gdb.base/nostdlib.exp
* gdb.base/offsets.exp
* gdb.base/opaque.exp
* gdb.base/pc-fp.exp
* gdb.base/permissions.exp
* gdb.base/print-symbol-loading.exp
* gdb.base/prologue-include.exp
* gdb.base/psymtab.exp
* gdb.base/ptype.exp
* gdb.base/random-signal.exp
* gdb.base/randomize.exp
* gdb.base/range-stepping.exp
* gdb.base/readline-ask.exp
* gdb.base/recpar.exp
* gdb.base/recurse.exp
* gdb.base/relational.exp
* gdb.base/restore.exp
* gdb.base/return-nodebug.exp
* gdb.base/return.exp
* gdb.base/run-after-attach.exp
* gdb.base/save-bp.exp
* gdb.base/scope.exp
* gdb.base/sect-cmd.exp
* gdb.base/set-lang-auto.exp
* gdb.base/set-noassign.exp
* gdb.base/setvar.exp
* gdb.base/sigall.exp
* gdb.base/sigbpt.exp
* gdb.base/siginfo-addr.exp
* gdb.base/siginfo-infcall.exp
* gdb.base/siginfo-obj.exp
* gdb.base/siginfo.exp
* gdb.base/signals-state-child.exp
* gdb.base/signest.exp
* gdb.base/sigstep.exp
* gdb.base/sizeof.exp
* gdb.base/skip.exp
* gdb.base/solib-corrupted.exp
* gdb.base/solib-nodir.exp
* gdb.base/solib-search.exp
* gdb.base/stack-checking.exp
* gdb.base/stale-infcall.exp
* gdb.base/stap-probe.exp
* gdb.base/start.exp
* gdb.base/step-break.exp
* gdb.base/step-bt.exp
* gdb.base/step-line.exp
* gdb.base/step-over-exit.exp
* gdb.base/step-over-syscall.exp
* gdb.base/step-resume-infcall.exp
* gdb.base/step-test.exp
* gdb.base/store.exp
* gdb.base/structs3.exp
* gdb.base/sym-file.exp
* gdb.base/symbol-without-target_section.exp
* gdb.base/term.exp
* gdb.base/testenv.exp
* gdb.base/ui-redirect.exp
* gdb.base/until.exp
* gdb.base/unwindonsignal.exp
* gdb.base/value-double-free.exp
* gdb.base/vla-datatypes.exp
* gdb.base/vla-ptr.exp
* gdb.base/vla-sideeffect.exp
* gdb.base/volatile.exp
* gdb.base/watch-cond-infcall.exp
* gdb.base/watch-cond.exp
* gdb.base/watch-non-mem.exp
* gdb.base/watch-read.exp
* gdb.base/watch-vfork.exp
* gdb.base/watchpoint-cond-gone.exp
* gdb.base/watchpoint-delete.exp
* gdb.base/watchpoint-hw-hit-once.exp
* gdb.base/watchpoint-hw.exp
* gdb.base/watchpoint-stops-at-right-insn.exp
* gdb.base/watchpoints.exp
* gdb.base/wchar.exp
* gdb.base/whatis-exp.exp
* gdb.btrace/buffer-size.exp
* gdb.btrace/data.exp
* gdb.btrace/delta.exp
* gdb.btrace/dlopen.exp
* gdb.btrace/enable.exp
* gdb.btrace/exception.exp
* gdb.btrace/function_call_history.exp
* gdb.btrace/gcore.exp
* gdb.btrace/instruction_history.exp
* gdb.btrace/nohist.exp
* gdb.btrace/reconnect.exp
* gdb.btrace/record_goto-step.exp
* gdb.btrace/record_goto.exp
* gdb.btrace/rn-dl-bind.exp
* gdb.btrace/segv.exp
* gdb.btrace/step.exp
* gdb.btrace/stepi.exp
* gdb.btrace/tailcall-only.exp
* gdb.btrace/tailcall.exp
* gdb.btrace/tsx.exp
* gdb.btrace/unknown_functions.exp
* gdb.btrace/vdso.exp
* gdb.compile/compile-ifunc.exp
* gdb.compile/compile-ops.exp
* gdb.compile/compile-print.exp
* gdb.compile/compile-setjmp.exp
* gdb.cp/abstract-origin.exp
* gdb.cp/ambiguous.exp
* gdb.cp/annota2.exp
* gdb.cp/annota3.exp
* gdb.cp/anon-ns.exp
* gdb.cp/anon-struct.exp
* gdb.cp/anon-union.exp
* gdb.cp/arg-reference.exp
* gdb.cp/baseenum.exp
* gdb.cp/bool.exp
* gdb.cp/breakpoint.exp
* gdb.cp/bs15503.exp
* gdb.cp/call-c.exp
* gdb.cp/casts.exp
* gdb.cp/chained-calls.exp
* gdb.cp/class2.exp
* gdb.cp/classes.exp
* gdb.cp/cmpd-minsyms.exp
* gdb.cp/converts.exp
* gdb.cp/cp-relocate.exp
* gdb.cp/cpcompletion.exp
* gdb.cp/cpexprs.exp
* gdb.cp/cplabel.exp
* gdb.cp/cplusfuncs.exp
* gdb.cp/cpsizeof.exp
* gdb.cp/ctti.exp
* gdb.cp/derivation.exp
* gdb.cp/destrprint.exp
* gdb.cp/dispcxx.exp
* gdb.cp/enum-class.exp
* gdb.cp/exception.exp
* gdb.cp/exceptprint.exp
* gdb.cp/expand-psymtabs-cxx.exp
* gdb.cp/expand-sals.exp
* gdb.cp/extern-c.exp
* gdb.cp/filename.exp
* gdb.cp/formatted-ref.exp
* gdb.cp/fpointer.exp
* gdb.cp/gdb1355.exp
* gdb.cp/gdb2495.exp
* gdb.cp/hang.exp
* gdb.cp/impl-this.exp
* gdb.cp/infcall-dlopen.exp
* gdb.cp/inherit.exp
* gdb.cp/iostream.exp
* gdb.cp/koenig.exp
* gdb.cp/local.exp
* gdb.cp/m-data.exp
* gdb.cp/m-static.exp
* gdb.cp/mb-ctor.exp
* gdb.cp/mb-inline.exp
* gdb.cp/mb-templates.exp
* gdb.cp/member-name.exp
* gdb.cp/member-ptr.exp
* gdb.cp/meth-typedefs.exp
* gdb.cp/method.exp
* gdb.cp/method2.exp
* gdb.cp/minsym-fallback.exp
* gdb.cp/misc.exp
* gdb.cp/namelessclass.exp
* gdb.cp/namespace-enum.exp
* gdb.cp/namespace-nested-import.exp
* gdb.cp/namespace.exp
* gdb.cp/nextoverthrow.exp
* gdb.cp/no-dmgl-verbose.exp
* gdb.cp/non-trivial-retval.exp
* gdb.cp/noparam.exp
* gdb.cp/nsdecl.exp
* gdb.cp/nsimport.exp
* gdb.cp/nsnested.exp
* gdb.cp/nsnoimports.exp
* gdb.cp/nsrecurs.exp
* gdb.cp/nsstress.exp
* gdb.cp/nsusing.exp
* gdb.cp/operator.exp
* gdb.cp/oranking.exp
* gdb.cp/overload-const.exp
* gdb.cp/overload.exp
* gdb.cp/ovldbreak.exp
* gdb.cp/ovsrch.exp
* gdb.cp/paren-type.exp
* gdb.cp/parse-lang.exp
* gdb.cp/pass-by-ref.exp
* gdb.cp/pr-1023.exp
* gdb.cp/pr-1210.exp
* gdb.cp/pr-574.exp
* gdb.cp/pr10687.exp
* gdb.cp/pr12028.exp
* gdb.cp/pr17132.exp
* gdb.cp/pr17494.exp
* gdb.cp/pr9067.exp
* gdb.cp/pr9167.exp
* gdb.cp/pr9631.exp
* gdb.cp/printmethod.exp
* gdb.cp/psmang.exp
* gdb.cp/psymtab-parameter.exp
* gdb.cp/ptype-cv-cp.exp
* gdb.cp/ptype-flags.exp
* gdb.cp/re-set-overloaded.exp
* gdb.cp/ref-types.exp
* gdb.cp/rtti.exp
* gdb.cp/scope-err.exp
* gdb.cp/shadow.exp
* gdb.cp/smartp.exp
* gdb.cp/static-method.exp
* gdb.cp/static-print-quit.exp
* gdb.cp/temargs.exp
* gdb.cp/templates.exp
* gdb.cp/try_catch.exp
* gdb.cp/typedef-operator.exp
* gdb.cp/typeid.exp
* gdb.cp/userdef.exp
* gdb.cp/using-crash.exp
* gdb.cp/var-tag.exp
* gdb.cp/virtbase.exp
* gdb.cp/virtfunc.exp
* gdb.cp/virtfunc2.exp
* gdb.cp/vla-cxx.exp
* gdb.disasm/t01_mov.exp
* gdb.disasm/t02_mova.exp
* gdb.disasm/t03_add.exp
* gdb.disasm/t04_sub.exp
* gdb.disasm/t05_cmp.exp
* gdb.disasm/t06_ari2.exp
* gdb.disasm/t07_ari3.exp
* gdb.disasm/t08_or.exp
* gdb.disasm/t09_xor.exp
* gdb.disasm/t10_and.exp
* gdb.disasm/t11_logs.exp
* gdb.disasm/t12_bit.exp
* gdb.disasm/t13_otr.exp
* gdb.dlang/circular.exp
* gdb.dwarf2/arr-stride.exp
* gdb.dwarf2/arr-subrange.exp
* gdb.dwarf2/atomic-type.exp
* gdb.dwarf2/bad-regnum.exp
* gdb.dwarf2/bitfield-parent-optimized-out.exp
* gdb.dwarf2/callframecfa.exp
* gdb.dwarf2/clztest.exp
* gdb.dwarf2/corrupt.exp
* gdb.dwarf2/data-loc.exp
* gdb.dwarf2/dup-psym.exp
* gdb.dwarf2/dw2-anon-mptr.exp
* gdb.dwarf2/dw2-anonymous-func.exp
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp
* gdb.dwarf2/dw2-bad-unresolved.exp
* gdb.dwarf2/dw2-basic.exp
* gdb.dwarf2/dw2-canonicalize-type.exp
* gdb.dwarf2/dw2-case-insensitive.exp
* gdb.dwarf2/dw2-common-block.exp
* gdb.dwarf2/dw2-compdir-oldgcc.exp
* gdb.dwarf2/dw2-compressed.exp
* gdb.dwarf2/dw2-const.exp
* gdb.dwarf2/dw2-cp-infcall-ref-static.exp
* gdb.dwarf2/dw2-cu-size.exp
* gdb.dwarf2/dw2-dup-frame.exp
* gdb.dwarf2/dw2-entry-value.exp
* gdb.dwarf2/dw2-icycle.exp
* gdb.dwarf2/dw2-ifort-parameter.exp
* gdb.dwarf2/dw2-inline-break.exp
* gdb.dwarf2/dw2-inline-param.exp
* gdb.dwarf2/dw2-intercu.exp
* gdb.dwarf2/dw2-intermix.exp
* gdb.dwarf2/dw2-lexical-block-bare.exp
* gdb.dwarf2/dw2-linkage-name-trust.exp
* gdb.dwarf2/dw2-minsym-in-cu.exp
* gdb.dwarf2/dw2-noloc.exp
* gdb.dwarf2/dw2-op-call.exp
* gdb.dwarf2/dw2-op-out-param.exp
* gdb.dwarf2/dw2-opt-structptr.exp
* gdb.dwarf2/dw2-param-error.exp
* gdb.dwarf2/dw2-producer.exp
* gdb.dwarf2/dw2-ranges-base.exp
* gdb.dwarf2/dw2-ref-missing-frame.exp
* gdb.dwarf2/dw2-reg-undefined.exp
* gdb.dwarf2/dw2-regno-invalid.exp
* gdb.dwarf2/dw2-restore.exp
* gdb.dwarf2/dw2-restrict.exp
* gdb.dwarf2/dw2-single-line-discriminators.exp
* gdb.dwarf2/dw2-strp.exp
* gdb.dwarf2/dw2-undefined-ret-addr.exp
* gdb.dwarf2/dw2-unresolved.exp
* gdb.dwarf2/dw2-var-zero-addr.exp
* gdb.dwarf2/dw4-sig-types.exp
* gdb.dwarf2/dwz.exp
* gdb.dwarf2/dynarr-ptr.exp
* gdb.dwarf2/enum-type.exp
* gdb.dwarf2/gdb-index.exp
* gdb.dwarf2/implptr-64bit.exp
* gdb.dwarf2/implptr-optimized-out.exp
* gdb.dwarf2/implptr.exp
* gdb.dwarf2/implref-array.exp
* gdb.dwarf2/implref-const.exp
* gdb.dwarf2/implref-global.exp
* gdb.dwarf2/implref-struct.exp
* gdb.dwarf2/mac-fileno.exp
* gdb.dwarf2/main-subprogram.exp
* gdb.dwarf2/member-ptr-forwardref.exp
* gdb.dwarf2/method-ptr.exp
* gdb.dwarf2/missing-sig-type.exp
* gdb.dwarf2/nonvar-access.exp
* gdb.dwarf2/opaque-type-lookup.exp
* gdb.dwarf2/pieces-optimized-out.exp
* gdb.dwarf2/pieces.exp
* gdb.dwarf2/pr10770.exp
* gdb.dwarf2/pr13961.exp
* gdb.dwarf2/staticvirtual.exp
* gdb.dwarf2/subrange.exp
* gdb.dwarf2/symtab-producer.exp
* gdb.dwarf2/trace-crash.exp
* gdb.dwarf2/typeddwarf.exp
* gdb.dwarf2/valop.exp
* gdb.dwarf2/watch-notconst.exp
* gdb.fortran/array-element.exp
* gdb.fortran/charset.exp
* gdb.fortran/common-block.exp
* gdb.fortran/complex.exp
* gdb.fortran/derived-type-function.exp
* gdb.fortran/derived-type.exp
* gdb.fortran/logical.exp
* gdb.fortran/module.exp
* gdb.fortran/multi-dim.exp
* gdb.fortran/nested-funcs.exp
* gdb.fortran/print-formatted.exp
* gdb.fortran/subarray.exp
* gdb.fortran/vla-alloc-assoc.exp
* gdb.fortran/vla-datatypes.exp
* gdb.fortran/vla-history.exp
* gdb.fortran/vla-ptr-info.exp
* gdb.fortran/vla-ptype-sub.exp
* gdb.fortran/vla-ptype.exp
* gdb.fortran/vla-sizeof.exp
* gdb.fortran/vla-type.exp
* gdb.fortran/vla-value-sub-arbitrary.exp
* gdb.fortran/vla-value-sub-finish.exp
* gdb.fortran/vla-value-sub.exp
* gdb.fortran/vla-value.exp
* gdb.fortran/whatis_type.exp
* gdb.go/chan.exp
* gdb.go/handcall.exp
* gdb.go/hello.exp
* gdb.go/integers.exp
* gdb.go/methods.exp
* gdb.go/package.exp
* gdb.go/strings.exp
* gdb.go/types.exp
* gdb.go/unsafe.exp
* gdb.guile/scm-arch.exp
* gdb.guile/scm-block.exp
* gdb.guile/scm-breakpoint.exp
* gdb.guile/scm-cmd.exp
* gdb.guile/scm-disasm.exp
* gdb.guile/scm-equal.exp
* gdb.guile/scm-frame-args.exp
* gdb.guile/scm-frame-inline.exp
* gdb.guile/scm-frame.exp
* gdb.guile/scm-iterator.exp
* gdb.guile/scm-math.exp
* gdb.guile/scm-objfile.exp
* gdb.guile/scm-ports.exp
* gdb.guile/scm-symbol.exp
* gdb.guile/scm-symtab.exp
* gdb.guile/scm-value-cc.exp
* gdb.guile/types-module.exp
* gdb.linespec/break-ask.exp
* gdb.linespec/cpexplicit.exp
* gdb.linespec/explicit.exp
* gdb.linespec/keywords.exp
* gdb.linespec/linespec.exp
* gdb.linespec/ls-dollar.exp
* gdb.linespec/ls-errs.exp
* gdb.linespec/skip-two.exp
* gdb.linespec/thread.exp
* gdb.mi/mi-async.exp
* gdb.mi/mi-basics.exp
* gdb.mi/mi-break.exp
* gdb.mi/mi-catch-load.exp
* gdb.mi/mi-cli.exp
* gdb.mi/mi-cmd-param-changed.exp
* gdb.mi/mi-console.exp
* gdb.mi/mi-detach.exp
* gdb.mi/mi-disassemble.exp
* gdb.mi/mi-eval.exp
* gdb.mi/mi-file-transfer.exp
* gdb.mi/mi-file.exp
* gdb.mi/mi-fill-memory.exp
* gdb.mi/mi-inheritance-syntax-error.exp
* gdb.mi/mi-linespec-err-cp.exp
* gdb.mi/mi-logging.exp
* gdb.mi/mi-memory-changed.exp
* gdb.mi/mi-read-memory.exp
* gdb.mi/mi-record-changed.exp
* gdb.mi/mi-reg-undefined.exp
* gdb.mi/mi-regs.exp
* gdb.mi/mi-return.exp
* gdb.mi/mi-reverse.exp
* gdb.mi/mi-simplerun.exp
* gdb.mi/mi-solib.exp
* gdb.mi/mi-stack.exp
* gdb.mi/mi-stepi.exp
* gdb.mi/mi-syn-frame.exp
* gdb.mi/mi-until.exp
* gdb.mi/mi-var-block.exp
* gdb.mi/mi-var-child.exp
* gdb.mi/mi-var-cmd.exp
* gdb.mi/mi-var-cp.exp
* gdb.mi/mi-var-display.exp
* gdb.mi/mi-var-invalidate.exp
* gdb.mi/mi-var-list-children-invalid-grandchild.exp
* gdb.mi/mi-vla-fortran.exp
* gdb.mi/mi-watch.exp
* gdb.mi/mi2-var-child.exp
* gdb.mi/user-selected-context-sync.exp
* gdb.modula2/unbounded-array.exp
* gdb.multi/dummy-frame-restore.exp
* gdb.multi/multi-arch-exec.exp
* gdb.multi/multi-arch.exp
* gdb.multi/tids.exp
* gdb.multi/watchpoint-multi.exp
* gdb.opencl/callfuncs.exp
* gdb.opencl/convs_casts.exp
* gdb.opencl/datatypes.exp
* gdb.opencl/operators.exp
* gdb.opencl/vec_comps.exp
* gdb.opt/clobbered-registers-O2.exp
* gdb.opt/inline-break.exp
* gdb.opt/inline-bt.exp
* gdb.opt/inline-cmds.exp
* gdb.opt/inline-locals.exp
* gdb.pascal/case-insensitive-symbols.exp
* gdb.pascal/floats.exp
* gdb.pascal/gdb11492.exp
* gdb.python/lib-types.exp
* gdb.python/py-arch.exp
* gdb.python/py-as-string.exp
* gdb.python/py-bad-printers.exp
* gdb.python/py-block.exp
* gdb.python/py-breakpoint-create-fail.exp
* gdb.python/py-breakpoint.exp
* gdb.python/py-caller-is.exp
* gdb.python/py-cmd.exp
* gdb.python/py-explore-cc.exp
* gdb.python/py-explore.exp
* gdb.python/py-finish-breakpoint.exp
* gdb.python/py-finish-breakpoint2.exp
* gdb.python/py-frame-args.exp
* gdb.python/py-frame-inline.exp
* gdb.python/py-frame.exp
* gdb.python/py-framefilter-mi.exp
* gdb.python/py-infthread.exp
* gdb.python/py-lazy-string.exp
* gdb.python/py-linetable.exp
* gdb.python/py-mi-events.exp
* gdb.python/py-mi-objfile.exp
* gdb.python/py-mi.exp
* gdb.python/py-objfile.exp
* gdb.python/py-pp-integral.exp
* gdb.python/py-pp-maint.exp
* gdb.python/py-pp-re-notag.exp
* gdb.python/py-pp-registration.exp
* gdb.python/py-recurse-unwind.exp
* gdb.python/py-strfns.exp
* gdb.python/py-symbol.exp
* gdb.python/py-symtab.exp
* gdb.python/py-sync-interp.exp
* gdb.python/py-typeprint.exp
* gdb.python/py-unwind-maint.exp
* gdb.python/py-unwind.exp
* gdb.python/py-value-cc.exp
* gdb.python/py-xmethods.exp
* gdb.reverse/amd64-tailcall-reverse.exp
* gdb.reverse/break-precsave.exp
* gdb.reverse/break-reverse.exp
* gdb.reverse/consecutive-precsave.exp
* gdb.reverse/consecutive-reverse.exp
* gdb.reverse/finish-precsave.exp
* gdb.reverse/finish-reverse-bkpt.exp
* gdb.reverse/finish-reverse.exp
* gdb.reverse/fstatat-reverse.exp
* gdb.reverse/getresuid-reverse.exp
* gdb.reverse/i386-precsave.exp
* gdb.reverse/i386-reverse.exp
* gdb.reverse/i386-sse-reverse.exp
* gdb.reverse/i387-env-reverse.exp
* gdb.reverse/i387-stack-reverse.exp
* gdb.reverse/insn-reverse.exp
* gdb.reverse/machinestate-precsave.exp
* gdb.reverse/machinestate.exp
* gdb.reverse/next-reverse-bkpt-over-sr.exp
* gdb.reverse/pipe-reverse.exp
* gdb.reverse/readv-reverse.exp
* gdb.reverse/recvmsg-reverse.exp
* gdb.reverse/rerun-prec.exp
* gdb.reverse/s390-mvcle.exp
* gdb.reverse/step-precsave.exp
* gdb.reverse/step-reverse.exp
* gdb.reverse/time-reverse.exp
* gdb.reverse/until-precsave.exp
* gdb.reverse/until-reverse.exp
* gdb.reverse/waitpid-reverse.exp
* gdb.reverse/watch-precsave.exp
* gdb.reverse/watch-reverse.exp
* gdb.rust/generics.exp
* gdb.rust/methods.exp
* gdb.rust/modules.exp
* gdb.rust/simple.exp
* gdb.server/connect-with-no-symbol-file.exp
* gdb.server/ext-attach.exp
* gdb.server/ext-restart.exp
* gdb.server/ext-wrapper.exp
* gdb.server/file-transfer.exp
* gdb.server/server-exec-info.exp
* gdb.server/server-kill.exp
* gdb.server/server-mon.exp
* gdb.server/wrapper.exp
* gdb.stabs/exclfwd.exp
* gdb.stabs/gdb11479.exp
* gdb.threads/clone-new-thread-event.exp
* gdb.threads/corethreads.exp
* gdb.threads/current-lwp-dead.exp
* gdb.threads/dlopen-libpthread.exp
* gdb.threads/gcore-thread.exp
* gdb.threads/sigstep-threads.exp
* gdb.threads/watchpoint-fork.exp
* gdb.trace/actions-changed.exp
* gdb.trace/backtrace.exp
* gdb.trace/change-loc.exp
* gdb.trace/circ.exp
* gdb.trace/collection.exp
* gdb.trace/disconnected-tracing.exp
* gdb.trace/ftrace.exp
* gdb.trace/mi-trace-frame-collected.exp
* gdb.trace/mi-trace-unavailable.exp
* gdb.trace/mi-traceframe-changed.exp
* gdb.trace/mi-tsv-changed.exp
* gdb.trace/no-attach-trace.exp
* gdb.trace/passc-dyn.exp
* gdb.trace/qtro.exp
* gdb.trace/range-stepping.exp
* gdb.trace/read-memory.exp
* gdb.trace/save-trace.exp
* gdb.trace/signal.exp
* gdb.trace/status-stop.exp
* gdb.trace/tfile.exp
* gdb.trace/trace-break.exp
* gdb.trace/trace-buffer-size.exp
* gdb.trace/trace-condition.exp
* gdb.trace/tracefile-pseudo-reg.exp
* gdb.trace/tstatus.exp
* gdb.trace/unavailable.exp
* gdb.trace/while-dyn.exp
* gdb.trace/while-stepping.exp

7 years agoFix incorrect reference to source files
Luis Machado [Fri, 23 Dec 2016 16:46:38 +0000 (10:46 -0600)]
Fix incorrect reference to source files

gdb/gdbserver/ChangeLog:

2016-12-23  Luis Machado  <lgustavo@codesourcery.com>

* win32-i386-low.c: Fix incorrect reference to a couple source files.
* nto-x86-low.c: Likewise.

7 years agoBump gold version number to 1.14.
Cary Coutant [Fri, 23 Dec 2016 16:00:13 +0000 (08:00 -0800)]
Bump gold version number to 1.14.

* NEWS: Add new features in 1.14.
* version.cc (version_string): Bump to 1.14.

7 years agoCall target specific add_symbols function
Alan Modra [Fri, 23 Dec 2016 13:13:54 +0000 (23:43 +1030)]
Call target specific add_symbols function

This allows targets that have target specific code to add object
symbols to make use of the generic archive handling.

* linker.c (generic_link_check_archive_element): Call target
bfd_link_add_symbols to add element symbols.

7 years agoRemove "collect" forms of generic linker add symbols functions
Alan Modra [Fri, 23 Dec 2016 12:58:38 +0000 (23:28 +1030)]
Remove "collect" forms of generic linker add symbols functions

Nothing calls them and they were in the way of a bug fix.

* linker.c (generic_link_add_symbols): Delete.  Merge into..
(_bfd_generic_link_add_symbols): ..here.
(generic_link_check_archive_element_no_collect): Delete.
(generic_link_check_archive_element_collect): Likewise.
(generic_link_add_object_symbols): Remove "collect" param.  Update
callers.
(generic_link_add_symbol_list): Likewise.
(generic_link_check_archive_element): Likewise.  Call
bfd_link_add_symbols rather than generic_link_add_object_symbols.
* libbfd-in.h (_bfd_generic_link_add_symbols_collect): Delete.
* libbfd.h: Regenerate.

7 years agohppa-linux-gnu-ranlib: libcpp.a: File format not recognized
Alan Modra [Thu, 22 Dec 2016 02:42:07 +0000 (13:12 +1030)]
hppa-linux-gnu-ranlib: libcpp.a: File format not recognized

This stops an --enable-targets selection affecting the main target in
regards to forcing 64-bit archives.  It also means mips64 and s390x
will revert to binutils-2.25 and binutils-2.26 behaviour of not
forcing 64-bit archives at least in the common case when plugins were
enabled.

PR binutils/20464
PR binutils/14625
* configure.ac: Revert 2016-05-25 configure change setting
want_64_bit_archive for mips64 and s390x.  Revise USE_64_BIT_ARCHIVE
description.
* configure: Regenerate.
* config.in: Regenerate.

7 years agoUpdated email address.
Bernhard Heckel [Fri, 23 Dec 2016 11:29:42 +0000 (12:29 +0100)]
Updated email address.

2016-12-23  Bernhard Heckel  <bernhard.heckel@intel.com>

gdb/Changelog:
* MAINTAINERS (Write After Approval): Updated email address.

Change-Id: I46b81392c2bd4b04e8e2aea2bb4bef2d0b509d24

7 years ago[msp430] Sync tc-msp430.c with devices.csv
Joe Seymour [Tue, 20 Dec 2016 14:50:49 +0000 (14:50 +0000)]
[msp430] Sync tc-msp430.c with devices.csv

This patch syncs the generated data structure in tc-msp430.c with the
latest version of devices.csv released by TI.

My understanding is that the devices being removed were "invalid spins",
so can't be being used by anyone, and never will be. Current web
searches related to these devices return no relevant results.

Built and tested (no regressions) as follows:
  Configured with: --target=msp430-elf --disable-gdb
  Test variations:
    msp430-sim/-mcpu=msp430
    msp430-sim/-mcpu=msp430x
    msp430-sim/-mcpu=msp430x/-mlarge/-mdata-region=either/-mcode-region=either
    msp430-sim/-mhwmult=none
    msp430-sim/-mhwmult=f5series

gas/
* config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's
devices.csv file as of September 2016.

7 years agoBump version to 2.28.51
Tristan Gingold [Fri, 23 Dec 2016 08:50:53 +0000 (09:50 +0100)]
Bump version to 2.28.51

bfd/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* version.m4: Bump version to 2.28.51
* configure: Regenerate.

binutils/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

gas/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

gprof/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

ld/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

opcodes/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

7 years agoAdd marker in NEWS files
Tristan Gingold [Fri, 23 Dec 2016 08:43:13 +0000 (09:43 +0100)]
Add marker in NEWS files

binutils/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.28.

gas/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.28.

ld/
2016-12-23  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.28.

7 years agoRegenerate pot files.
Tristan Gingold [Fri, 23 Dec 2016 08:32:28 +0000 (09:32 +0100)]
Regenerate pot files.

7 years agoAdd -z bndplt support (for Intel MPX).
Cary Coutant [Sat, 17 Dec 2016 03:17:38 +0000 (19:17 -0800)]
Add -z bndplt support (for Intel MPX).

gold/
PR gold/17643
* options.h (-z bndplt): New option.
* x86_64.cc (Output_data_plt_x86_64::regular_count): New method.
(Output_data_plt_x86_64::address_for_global): Move implementation into
virtual method.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::got): New method.
(Output_data_plt_x86_64::got_plt): New method.
(Output_data_plt_x86_64::got_irelative): New method.
(Output_data_plt_x86_64::do_address_for_global): New virtual method.
(Output_data_plt_x86_64::do_address_for_local): New virtual method.
(class Output_data_plt_x86_64_bnd): New class.
(Target_x86_64::do_make_data_plt): Move out of line and specialize
for each size (both overloads).
(Output_data_plt_x86_64::set_final_data_size): Cosmetic changes.
* testsuite/Makefile.am (bnd_plt_1): New test case.
(bnd_ifunc_1): New test case.
(bnd_ifunc_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.s: New source file.
* testsuite/bnd_ifunc_1.sh: New shell script.
* testsuite/bnd_ifunc_2.s: New source file.
* testsuite/bnd_ifunc_2.sh: New shell script.
* testsuite/bnd_plt_1.s: New source file.
* testsuite/bnd_plt_1.sh: New shell script.

7 years agoFix placement of forced local symbols in the dynamic symbol table.
Cary Coutant [Thu, 22 Dec 2016 22:06:24 +0000 (14:06 -0800)]
Fix placement of forced local symbols in the dynamic symbol table.

Gold was not placing forced-local symbols (e.g., hidden visibility)
at the front of the dynamic symbol table, or including them in the
count of local symbols recorded in the .dynsym section's sh_info field.

gold/
* layout.cc (Layout::finalize): Track count of forced-local symbols
in .dynsym.
(Layout::create_symtab_sections): Add local_dynamic_count parameter;
use that instead of sh_info value.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter; pass it to Symtab::set_dynsym_indexes().  Include forced
locals in sh_info value.  Pass index of first real global to
Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table().
* layout.h (Layout::create_symtab_sections): Add local_dynamic_count
parameter.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter.
* symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.  Process forced-local symbols first and return the count.
(Symbol_table::finalize): Update comments.
* symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.
(Symbol_table::first_dynamic_global_index_): Update comment.
(Symbol_table::dynamic_count_): Update comment.
* testsuite/Makefile.am (ifuncmod1.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ifuncmod1.sh: New shell script.

7 years agoFix problem where version script causes predefined hidden symbol to be defined twice.
Cary Coutant [Thu, 22 Dec 2016 01:32:39 +0000 (17:32 -0800)]
Fix problem where version script causes predefined hidden symbol to be defined twice.

When creating a predefined hidden symbol like _GLOBAL_OFFSET_TABLE_, gold
was incorrectly letting a version script add a version to the symbol,
resulting in two copies of the symbol, both STB_LOCAL, but one of which
was grouped in the globals part of the symbol table.

gold/
* symtab.cc (Symbol_table::define_special_symbol): Add is_forced_local
parameter; if set, do not check version script.
(Symbol_table::do_define_in_output_data): Pass is_forced_local for
STB_LOCAL predefined symbols.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
* symtab.h (Symbol_table::define_special_symbol): Add is_forced_local
parameter. Adjust all callers.
* testsuite/Makefile.am (ver_test_8.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* ver_test_8.sh: New test script.

7 years agoinfrun.c (set_step_over_info): Add comment.
Doug Evans [Thu, 22 Dec 2016 23:50:10 +0000 (15:50 -0800)]
infrun.c (set_step_over_info): Add comment.

gdb/ChangeLog:

* infrun.c (set_step_over_info): Add comment.

7 years agoNew syntax for mt print symbols,msymbols,psymbols.
Doug Evans [Mon, 19 Dec 2016 16:33:46 +0000 (08:33 -0800)]
New syntax for mt print symbols,msymbols,psymbols.

gdb/ChangeLog:

* NEWS: Document new syntax for "mt print symbols", "mt print psymbols"
and "mt print msymbols" commands.
* psymtab.c (DEV_TTY): Delete.
(dump_psymtab_addrmap): Don't dump if psymtabs_addrmap is NULL.
(maintenance_print_psymbols): Rewrite for new syntax:
mt print psymbols [-objfile objfile] [-pc address] [outfile]
mt print psymbols [-objfile objfile] [-source source] [outfile]
(_initialize_psymtab): Update help text.
* symmisc.c (maintenance_print_symbols): Rewrite for new syntax:
mt print symbols [-pc address] [outfile]
mt print symbols [-objfile objfile] [-source source] [outfile]
(maintenance_print_msymbols): Rewrite for new syntax:
mt print msymbols [-objfile objfile] [outfile]
Only print symbols for the current progspace.
(_initialize_symmisc): Update help text.

gdb/doc/ChangeLog:

* gdb.texinfo (Symbols): Update docs for symbol printing maintenance
commands.

gdb/testsuite/ChangeLog:

* gdb.base/maint.exp: Update tests for maint print symbols, psymbols
and msymbols.

7 years agoClass-ify ui_out
Simon Marchi [Thu, 22 Dec 2016 21:17:31 +0000 (16:17 -0500)]
Class-ify ui_out

This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy.  ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.

In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.

It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...

gdb/ChangeLog:

    * ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
    ui_out_table_body,  ui_out_field_int, ui_out_field_fmt_int,
    ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
    ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
    ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
    ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
    Remove, replace with a method in class ui_out.
    (table_begin_ftype): Remove, replace with pure virtual method in
    class ui_out.
    (table_body_ftype): Likewise.
    (table_end_ftype): Likewise.
    (table_header_ftype): Likewise.
    (ui_out_begin_ftype): Likewise.
    (ui_out_end_ftype): Likewise.
    (field_int_ftype): Likewise.
    (field_skip_ftype): Likewise.
    (field_string_ftype): Likewise.
    (field_fmt_ftype): Likewise.
    (spaces_ftype): Likewise.
    (text_ftype): Likewise.
    (message_ftype): Likewise.
    (wrap_hint_ftype): Likewise.
    (flush_ftype): Likewise.
    (redirect_ftype): Likewise.
    (data_destroy_ftype): Likewise.
    (struct ui_out_impl): Remove, replace with class ui_out.
    (ui_out_new): Remove.
    (class ui_out): New class.
    * ui-out.c (struct ui_out): Remove, replaced with class ui_out.
    (current_level): Remove, replace with ui_out method.
    (push_level): Likewise.
    (pop_level): Likewise.
    (uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
    uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
    uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
    uo_redirect, uo_field_string): Remove.
    (ui_out_table_begin): Replace with ...
    (ui_out::table_begin): ... this.
    (ui_out_table_body): Replace with ...
    (ui_out::table_body): ... this.
    (ui_out_table_end): Replace with ...
    (ui_out::table_end): ... this.
    (ui_out_table_header): Replace with ...
    (ui_out::table_header): ... this.
    (ui_out_begin): Replace with ...
    (ui_out::begin): ... this.
    (ui_out_end): Replace with ...
    (ui_out::end): ... this.
    (ui_out_field_int): Replace with ...
    (ui_out::field_int): ... this.
    (ui_out_field_fmt_int): Replace with ...
    (ui_out::field_fmt_int): ... this.
    (ui_out_field_core_addr): Replace with ...
    (ui_out::field_core_addr): ... this.
    (ui_out_field_stream): Replace with ...
    (ui_out::field_stream): ... this.
    (ui_out_field_skip): Replace with ...
    (ui_out::field_skip): ... this.
    (ui_out_field_string): Replace with ...
    (ui_out::field_string): ... this.
    (ui_out_field_fmt): Replace with ...
    (ui_out::field_fmt): ... this.
    (ui_out_spaces): Replace with ...
    (ui_out::spaces): ... this.
    (ui_out_text): Replace with ...
    (ui_out::text): ... this.
    (ui_out_message): Replace with ...
    (ui_out::message): ... this.
    (ui_out_wrap_hint): Replace with ...
    (ui_out::wrap_hint): ... this.
    (ui_out_flush): Replace with ...
    (ui_out::flush): ... this.
    (ui_out_redirect): Replace with ...
    (ui_out::redirect): ... this.
    (ui_out_test_flags): Replace with ...
    (ui_out::test_flags): ... this.
    (ui_out_is_mi_like_p): Replace with ...
    (ui_out::is_mi_like_p): ... this.
    (verify_field): Replace with ...
    (ui_out::verify_field): ... this.
    (ui_out_query_field): Replace with ...
    (ui_out::query_table_field): ... this.
    (ui_out_data): Remove.
    (ui_out_new): Remove, replace with ...
    (ui_out::ui_out): ... this constructor.
    (do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
    do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
    make_cleanup_ui_out_list_begin_end): Update fallouts of struct
    ui_out -> class ui_out change.
    * cli-out.c (cli_out_data): Remove.
    (cli_uiout_dtor): Remove.
    (cli_table_begin): Replace with ...
    (cli_ui_out::do_table_begin): ... this new method.
    (cli_table_body): Replace with ...
    (cli_ui_out::do_table_body): ... this new method.
    (cli_table_end): Replace with ...
    (cli_ui_out::do_table_end): ... this new method.
    (cli_table_header): Replace with ...
    (cli_ui_out::do_table_header): ... this new method.
    (cli_begin): Replace with ...
    (cli_ui_out::do_begin): ... this new method.
    (cli_end): Replace with ...
    (cli_ui_out::do_end): ... this new method.
    (cli_field_int): Replace with ...
    (cli_ui_out::do_field_int): ... this new method.
    (cli_field_skip): Replace with ...
    (cli_ui_out::do_field_skip): ... this new method.
    (cli_field_string): Replace with ...
    (cli_ui_out::do_field_string): ... this new method.
    (cli_field_fmt): Replace with ...
    (cli_ui_out::do_field_fmt): ... this new method.
    (cli_spaces): Replace with ...
    (cli_ui_out::do_spaces): ... this new method.
    (cli_text): Replace with ...
    (cli_ui_out::do_text): ... this new method.
    (cli_message): Replace with ...
    (cli_ui_out::do_message): ... this new method.
    (cli_wrap_hint): Replace with ...
    (cli_ui_out::do_wrap_hint): ... this new method.
    (cli_flush): Replace with ...
    (cli_ui_out::do_flush): ... this new method.
    (cli_redirect): Replace with ...
    (cli_ui_out::do_redirect): ... this new method.
    (out_field_fmt): Replace with ...
    (cli_ui_out::out_field_fmt): ... this new method.
    (field_separator): Replace with ...
    (cli_ui_out::field_separator): ... this new method.
    (cli_out_set_stream): Replace with ...
    (cli_ui_out::set_stream): ... this new method.
    (cli_ui_out_impl): Remove.
    (cli_out_data_ctor): Remove.
    (cli_ui_out_impl::cli_ui_out_impl): New constructor.
    (cli_ui_out_impl::~cli_ui_out_impl): New destructor.
    (cli_out_new): Change return type to cli_ui_out *, instantiate a
    cli_ui_out.
    * cli-out.h (cli_ui_out_data): Remove, replace with class
    cli_ui_out.
    (class cli_ui_out): New class.
    (cli_ui_out_impl): Remove.
    (cli_out_data_ctor): Remove.
    (cli_out_new): Change return type to cli_ui_out*.
    (cli_out_set_stream): Remove.
    * cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
    to cli_ui_out*.
    (cli_interpreter_resume): Adapt.
    (cli_interpreter_exec): Adapt.
    * mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
    (mi_ui_out_impl): Remove.
    (mi_table_begin): Replace with ...
    (mi_ui_out::do_table_begin): ... this.
    (mi_table_body): Replace with ...
    (mi_ui_out::do_table_body): ... this.
    (mi_table_end): Replace with ...
    (mi_ui_out::do_table_end): ... this.
    (mi_table_header): Replace with ...
    (mi_ui_out::do_table_header): ... this.
    (mi_begin): Replace with ...
    (mi_ui_out::do_begin): ... this.
    (mi_end): Replace with ...
    (mi_ui_out::do_end): ... this.
    (mi_field_int): Replace with ...
    (mi_ui_out::do_field_int): ... this.
    (mi_field_skip): Replace with ...
    (mi_ui_out::do_field_skip): ... this.
    (mi_field_string): Replace with ...
    (mi_ui_out::do_field_string): ... this.
    (mi_field_fmt): Replace with ...
    (mi_ui_out::do_field_fmt): ... this.
    (mi_spaces): Replace with ...
    (mi_ui_out::do_spaces): ... this.
    (mi_text): Replace with ...
    (mi_ui_out::do_text): ... this.
    (mi_message): Replace with ...
    (mi_ui_out::do_message): ... this.
    (mi_wrap_hint): Replace with ...
    (mi_ui_out::do_wrap_hint): ... this.
    (mi_flush): Replace with ...
    (mi_ui_out::do_flush): ... this.
    (mi_redirect): Replace with ...
    (mi_ui_out::do_redirect):
    (field_separator): Replace with ...
    (mi_ui_out::field_separator):
    (mi_open): Replace with ...
    (mi_ui_out::open): ... this.
    (mi_close): Replace with ...
    (mi_ui_out::close): ... this.
    (mi_out_rewind): Replace with ...
    (mi_ui_out::rewind): ... this.
    (mi_out_put): Replace with ...
    (mi_ui_out::put): ... this.
    (mi_version): Replace with ...
    (mi_ui_out::version): ... this.
    (mi_out_data_ctor): Replace with ...
    (mi_ui_out::mi_ui_out): ... this.
    (mi_out_data_dtor): Replace with ...
    (mi_ui_out::~mi_ui_out): ... this.
    (mi_out_new): Change return type to mi_ui_out*, instantiate
    an mi_ui_out object.
    (as_mi_ui_out): New function.
    (mi_version): Update fallouts of struct ui_out to class ui_out
    transition.
    (mi_out_put): Likewise.
    (mi_out_rewind): Likewise.
    * mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
    * tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
    Remove.
    (tui_field_int): Replace with ...
    (tui_ui_out::do_field_int): ... this.
    (tui_field_string): Replace with ...
    (tui_ui_out::do_field_string): ... this.
    (tui_field_fmt): Replace with ...
    (tui_ui_out::do_field_fmt): ... this.
    (tui_text): Replace with ...
    (tui_ui_out::do_text): ... this.
    (tui_out_new): Change return type to tui_ui_out*, instantiate
    tui_ui_out object.
    (tui_ui_out::tui_ui_out): New.
    * tui/tui-out.h: New file.
    * tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
    * tui/tui-io.c: Include tui/tui-out.h.
    (tui_old_uiout): Change type to cli_ui_out*.
    (tui_setup_io): Use dynamic_cast.
    * tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
    * tui/tui-interp.c (tui_resume): Adapt.
    * ada-lang.c (print_it_exception): Update fallouts of struct
    ui_out to class ui_out transition.
    (print_one_exception): Likewise.
    (print_mention_exception): Likewise.
    * ada-tasks.c (print_ada_task_info): Likewise.
    (info_task): Likewise.
    (task_command): Likewise.
    * auto-load.c (print_script): Likewise.
    (auto_load_info_scripts): Likewise.
    (info_auto_load_cmd): Likewise.
    * break-catch-sig.c (signal_catchpoint_print_one): Likewise.
    * break-catch-syscall.c (print_it_catch_syscall): Likewise.
    (print_one_catch_syscall): Likewise.
    * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
    (print_one_exception_catchpoint): Likewise.
    (print_one_detail_exception_catchpoint): Likewise.
    (print_mention_exception_catchpoint): Likewise.
    * breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
    (print_solib_event): Likewise.
    (watchpoint_check): Likewise.
    (wrap_indent_at_field): Likewise.
    (print_breakpoint_location): Likewise.
    (output_thread_groups): Likewise.
    (print_one_breakpoint_location): Likewise.
    (breakpoint_1): Likewise.
    (default_collect_info): Likewise.
    (watchpoints_info): Likewise.
    (print_it_catch_fork): Likewise.
    (print_one_catch_fork): Likewise.
    (print_it_catch_vfork): Likewise.
    (print_one_catch_vfork): Likewise.
    (print_it_catch_solib): Likewise.
    (print_one_catch_solib): Likewise.
    (print_it_catch_exec): Likewise.
    (print_one_catch_exec): Likewise.
    (mention): Likewise.
    (print_it_ranged_breakpoint): Likewise.
    (print_one_ranged_breakpoint): Likewise.
    (print_one_detail_ranged_breakpoint): Likewise.
    (print_mention_ranged_breakpoint): Likewise.
    (print_it_watchpoint): Likewise.
    (print_mention_watchpoint): Likewise.
    (print_it_masked_watchpoint): Likewise.
    (print_one_detail_masked_watchpoint): Likewise.
    (print_mention_masked_watchpoint): Likewise.
    (bkpt_print_it): Likewise.
    (tracepoint_print_one_detail): Likewise.
    (tracepoint_print_mention): Likewise.
    (update_static_tracepoint): Likewise.
    (tracepoints_info): Likewise.
    (save_breakpoints): Likewise.
    * cli/cli-cmds.c (complete_command): Likewise.
    * cli/cli-logging.c (set_logging_redirect): Likewise.
    (pop_output_files): Likewise.
    (handle_redirections): Likewise.
    * cli/cli-script.c (print_command_lines): Likewise.
    * cli/cli-setshow.c (do_show_command): Likewise.
    (cmd_show_list): Likewise.
    * cp-abi.c (list_cp_abis): Likewise.
    (show_cp_abi_cmd): Likewise.
    * darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
    * disasm.c (gdb_pretty_print_insn): Likewise.
    (do_mixed_source_and_assembly_deprecated): Likewise.
    (do_mixed_source_and_assembly): Likewise.
    * gdb_bfd.c (print_one_bfd): Likewise.
    (maintenance_info_bfds): Likewise.
    * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
    * guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
    * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
    * i386-tdep.c (i386_mpx_print_bounds): Likewise.
    * infcmd.c (run_command_1): Likewise.
    (print_return_value_1): Likewise.
    * inferior.c (print_selected_inferior): Likewise.
    (print_inferior): Likewise.
    * infrun.c (print_end_stepping_range_reason): Likewise.
    (print_signal_exited_reason): Likewise.
    (print_exited_reason): Likewise.
    (print_signal_received_reason): Likewise.
    (print_no_history_reason): Likewise.
    * interps.c (interp_set): Likewise.
    * linespec.c (decode_line_full): Likewise.
    * linux-thread-db.c (info_auto_load_libthread_db): Likewise.
    * mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
    (mi_cmd_env_path): Likewise.
    (mi_cmd_env_dir): Likewise.
    (mi_cmd_inferior_tty_show): Likewise.
    * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
    (print_partial_file_name): Likewise.
    (mi_cmd_file_list_exec_source_files): Likewise.
    * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
    (mi_cmd_info_gdb_mi_command): Likewise.
    * mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
    (mi_cmd_stack_list_args): Likewise.
    (list_arg_or_local): Likewise.
    * mi/mi-cmd-var.c (print_varobj): Likewise.
    (mi_cmd_var_create): Likewise.
    (mi_cmd_var_delete): Likewise.
    (mi_cmd_var_set_format): Likewise.
    (mi_cmd_var_show_format): Likewise.
    (mi_cmd_var_info_num_children): Likewise.
    (mi_cmd_var_list_children): Likewise.
    (mi_cmd_var_info_type): Likewise.
    (mi_cmd_var_info_path_expression): Likewise.
    (mi_cmd_var_info_expression): Likewise.
    (mi_cmd_var_show_attributes): Likewise.
    (mi_cmd_var_evaluate_expression): Likewise.
    (mi_cmd_var_assign): Likewise.
    (varobj_update_one): Likewise.
    * mi/mi-interp.c (as_mi_interp): Likewise.
    (mi_on_normal_stop_1): Likewise.
    (mi_tsv_modified): Likewise.
    (mi_breakpoint_created): Likewise.
    (mi_breakpoint_modified): Likewise.
    (mi_solib_loaded): Likewise.
    (mi_solib_unloaded): Likewise.
    (mi_command_param_changed): Likewise.
    (mi_memory_changed): Likewise.
    (mi_user_selected_context_changed): Likewise.
    * mi/mi-main.c (print_one_inferior): Likewise.
    (output_cores): Likewise.
    (list_available_thread_groups): Likewise.
    (mi_cmd_data_list_register_names): Likewise.
    (mi_cmd_data_list_changed_registers): Likewise.
    (output_register): Likewise.
    (mi_cmd_data_evaluate_expression): Likewise.
    (mi_cmd_data_read_memory): Likewise.
    (mi_cmd_data_read_memory_bytes): Likewise.
    (mi_cmd_list_features): Likewise.
    (mi_cmd_list_target_features): Likewise.
    (mi_cmd_add_inferior): Likewise.
    (mi_execute_command): Likewise.
    (mi_load_progress): Likewise.
    (print_variable_or_computed): Likewise.
    (mi_cmd_trace_frame_collected): Likewise.
    * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
    * osdata.c (info_osdata_command): Likewise.
    * probe.c (gen_ui_out_table_header_info): Likewise.
    (print_ui_out_not_applicables): Likewise.
    (print_ui_out_info): Likewise.
    (info_probes_for_ops): Likewise.
    (enable_probes_command): Likewise.
    (disable_probes_command): Likewise.
    * progspace.c (print_program_space): Likewise.
    * python/py-breakpoint.c (bppy_get_commands): Likewise.
    * python/py-framefilter.c (py_print_type): Likewise.
    (py_print_value): Likewise.
    (py_print_single_arg): Likewise.
    (enumerate_args): Likewise.
    (enumerate_locals): Likewise.
    (py_print_args): Likewise.
    (py_print_frame): Likewise.
    * record-btrace.c (btrace_ui_out_decode_error): Likewise.
    (btrace_call_history_insn_range): Likewise.
    (btrace_call_history_src_line): Likewise.
    (btrace_call_history): Likewise.
    * remote.c (show_remote_cmd): Likewise.
    * skip.c (skip_info): Likewise.
    * solib.c (info_sharedlibrary_command): Likewise.
    * source.c (print_source_lines_base): Likewise.
    * spu-tdep.c (info_spu_event_command): Likewise.
    (info_spu_signal_command): Likewise.
    (info_spu_mailbox_list): Likewise.
    (info_spu_dma_cmdlist): Likewise.
    (info_spu_dma_command): Likewise.
    (info_spu_proxydma_command): Likewise.
    * stack.c (print_stack_frame): Likewise.
    (print_frame_arg): Likewise.
    (read_frame_arg): Likewise.
    (print_frame_args): Likewise.
    (print_frame_info): Likewise.
    (print_frame): Likewise.
    * symfile.c (load_progress): Likewise.
    (generic_load): Likewise.
    (print_transfer_performance): Likewise.
    * thread.c (do_captured_list_thread_ids): Likewise.
    (print_thread_info_1): Likewise.
    (restore_selected_frame): Likewise.
    (do_captured_thread_select): Likewise.
    (print_selected_thread_frame): Likewise.
    * top.c (execute_command_to_string): Likewise.
    * tracepoint.c (tvariables_info_1): Likewise.
    (trace_status_mi): Likewise.
    (tfind_1): Likewise.
    (print_one_static_tracepoint_marker): Likewise.
    (info_static_tracepoint_markers_command): Likewise.
    * utils.c (do_ui_out_redirect_pop): Likewise.
    (fputs_maybe_filtered): Likewise.

7 years agoDon't call "error" in sysroot-prefix.exp
Alan Modra [Thu, 22 Dec 2016 01:37:31 +0000 (12:07 +1030)]
Don't call "error" in sysroot-prefix.exp

We don't want to report a test failure as a tcl error.

* testsuite/ld-scripts/sysroot-prefix.exp (sysroot_prefix_test_setup):
Call perror rather than error on "as" or "ar" failures.

7 years agoMake linker-created symbols relocatable where appropriate.
Cary Coutant [Thu, 22 Dec 2016 00:21:23 +0000 (16:21 -0800)]
Make linker-created symbols relocatable where appropriate.

Linker-created symbols like __ehdr_start, __etext, __edata, and end
should be relocatable, not absolute.

gold/
* output.cc (Output_segment::first_section): Return NULL if there are
no sections in the segment.
* output.h (Output_segment::first_section_load_address): Assert that
first section is not NULL.
* symtab.cc (Symbol_table::sized_write_globals): Attach linker-created
segment-relative symbols to first section of the segment.

7 years agoAutomatic date update in version.in
GDB Administrator [Thu, 22 Dec 2016 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agoFix bugs with float compare and Inf operands.
Jim Wilson [Wed, 21 Dec 2016 20:33:12 +0000 (12:33 -0800)]
Fix bugs with float compare and Inf operands.

sim/aarch64/
* simulator.c (set_flags_for_float_compare): Add code to handle Inf.
Add comment to document NaN issue.
(set_flags_for_double_compare): Likewise.

sim/testsuite/sim/aarch64/
* fcmp.s: New.

7 years agoDon't make_bfd_vms_lib archive functions NULL
Alan Modra [Wed, 21 Dec 2016 14:10:54 +0000 (00:40 +1030)]
Don't make_bfd_vms_lib archive functions NULL

Contrary to the comment, they can in fact be called.

* libbfd-in.h (_bfd_vms_lib_slurp_armap): Use _bfd_noarchive function.
(_bfd_vms_lib_slurp_extended_name_table: Likewise.
(_bfd_vms_lib_construct_extended_name_table: Likewise.
(_bfd_vms_lib_truncate_arname: Likewise.
(_bfd_vms_lib_write_armap: Likewise.
(_bfd_vms_lib_read_ar_hdr: Likewise.
(_bfd_vms_lib_write_ar_hdr: Likewise.
* libbfd.h: Regenerate.

7 years agoChangeLog formatting fixes
Alan Modra [Wed, 21 Dec 2016 14:09:02 +0000 (00:39 +1030)]
ChangeLog formatting fixes

7 years agoSupport aligning text section from odd addresses
Andrew Waterman [Tue, 20 Dec 2016 22:25:39 +0000 (14:25 -0800)]
Support aligning text section from odd addresses

Previously, the alignment directives were not correctly supported
in the text section when current alignment was only 1 byte (i.e.,
when the address was odd).  Since there are no 1-byte instructions
in RISC-V, this patch resolves the bug by writing a zero byte to
obtain 2-byte alignment, at which point a 2-byte NOP can be used
to obtain 4-byte alignment.

Resolves https://github.com/riscv/riscv-gnu-toolchain/issues/205

* config/tc-riscv.c (riscv_make_nops): Emit 2-byte NOPs.
(riscv_frag_align_code): Correct frag_align_code arg.

7 years agoFix a const-safety issue on GCC-4.9 and above
Tim Newsome [Tue, 20 Dec 2016 22:25:37 +0000 (14:25 -0800)]
Fix a const-safety issue on GCC-4.9 and above

* config/tc-riscv.c (riscv_pre_output_hook): Remove const from
loc4_frag.

7 years agoAvoid creating symbol table entries for registers
Andrew Waterman [Tue, 20 Dec 2016 22:25:33 +0000 (14:25 -0800)]
Avoid creating symbol table entries for registers

Instructions like "jal t0, foo" were erroneously creating symbol table
entries for t0 as well as foo, which causes linking problems.  Fix by
reordering instruction alternatives so that t0 is first attempted to
be parsed as a register, rather than as a symbol.

* riscv-opc.c (riscv_opcodes): Reorder jal and call entries.

7 years agoDo not add padding if an output section is marked as ignored
Igor Kudrin [Wed, 21 Dec 2016 10:53:34 +0000 (21:23 +1030)]
Do not add padding if an output section is marked as ignored

* ldlang.c (size_input_section): Avoid calling insert_pad
if output_section_statement->ignored is set.

7 years agobfd: aarch64: fix word and arrdess size declaration in ilp32 mode
Yury Norov [Fri, 9 Dec 2016 16:17:58 +0000 (21:47 +0530)]
bfd: aarch64: fix word and arrdess size declaration in ilp32 mode

ILP32 has 32-bit word and address, but currently they declared as 64-bit in
bfd_aarch64_arch_ilp32, which breaks further logic of bfd. This patch fixes it.

Glibc testsuite build with patched binutils shows that next tests stop to fail:
iconvdata/mtrace-tst-loading
iconvdata/tst-loading
iconvdata/tst-tables
localedata/mtrace-tst-leaks
localedata/tst-leaks
posix/tst-getaddrinfo4
posix/tst-getaddrinfo5
posix/tst-regex2

7 years agoRemove high bit set characters
Alan Modra [Wed, 21 Dec 2016 08:43:52 +0000 (19:13 +1030)]
Remove high bit set characters

gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.

7 years agoDocument character escape sequences
Alan Modra [Wed, 21 Dec 2016 08:37:55 +0000 (19:07 +1030)]
Document character escape sequences

PR gas/10946
* doc/as.texinfo (Chars): Document escape sequences.

7 years agoAutomatic date update in version.in
GDB Administrator [Wed, 21 Dec 2016 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in

7 years agogdb: Constify solib_find
Pedro Alves [Tue, 20 Dec 2016 17:07:19 +0000 (17:07 +0000)]
gdb: Constify solib_find

gdb/ChangeLog:
2016-12-20  Pedro Alves  <palves@redhat.com>

* nto-tdep.c (nto_find_and_open_solib): Constify 'solib'
parameter.
* nto-tdep.h (nto_find_and_open_solib): Constify 'solib'
parameter.
* solib.c (solib_find_1, exec_file_find, solib_find): Constify
in_pathname' parameter.
* solist.h (struct target_so_ops) <find_and_open_solib>: Constify
'soname' parameter.
(exec_file_find, solib_find): Constify 'in_pathname' parameter.

7 years agoFix longjmp across readline w/ --enable-sjlj-exceptions toolchains
Pedro Alves [Tue, 20 Dec 2016 15:46:44 +0000 (15:46 +0000)]
Fix longjmp across readline w/ --enable-sjlj-exceptions toolchains

Nowadays, GDB propagates C++ exceptions across readline using
setjmp/longjmp 89525768cd08 ("Propagate GDB/C++ exceptions across
readline using sj/lj-based TRY/CATCH") because DWARF-based unwinding
can't cross C functions compiled without -fexceptions (see details
from the commit above).

Unfortunately, toolchains that use SjLj-based C++ exceptions got
broken with that fix, because _Unwind_SjLj_Unregister, which is put at
the exit of a function, is not executed due to the longjmp added by
that commit.

 (gdb) [New Thread 2936.0xb80]
 kill

 Thread 1 received signal SIGSEGV, Segmentation fault.
 0x03ff662b in ?? ()
 top?bt 15
 #0  0x03ff662b in ?? ()
 #1  0x00526b92 in stdin_event_handler (error=0, client_data=0x172ed8)
    at ../../binutils-gdb/gdb/event-top.c:555
 #2  0x00525a94 in handle_file_event (ready_mask=<optimized out>,
    file_ptr=0x3ff5cb8) at ../../binutils-gdb/gdb/event-loop.c:733
 #3  gdb_wait_for_event (block=block@entry=1)
    at ../../binutils-gdb/gdb/event-loop.c:884
 #4  0x00525bfb in gdb_do_one_event ()
    at ../../binutils-gdb/gdb/event-loop.c:347
 #5  0x00525ce5 in start_event_loop ()
    at ../../binutils-gdb/gdb/event-loop.c:371
 #6  0x0051fada in captured_command_loop (data=0x0)
    at ../../binutils-gdb/gdb/main.c:324
 #7  0x0051cf5d in catch_errors (
    func=func@entry=0x51fab0 <captured_command_loop(void*)>,
    func_args=func_args@entry=0x0,
    errstring=errstring@entry=0x7922bf <VEC_interp_factory_p_quick_push(VEC_inte rp_factory_p*, interp_factory*, char const*, unsigned int)::__PRETTY_FUNCTION__+351> "", mask=mask@entry=RETURN_MASK_ALL)
    at ../../binutils-gdb/gdb/exceptions.c:236
 #8  0x00520f0c in captured_main (data=0x328feb4)
    at ../../binutils-gdb/gdb/main.c:1149
 #9  gdb_main (args=args@entry=0x328feb4) at ../../binutils-gdb/gdb/main.c:1159
 #10 0x0071e400 in main (argc=1, argv=0x171220)
    at ../../binutils-gdb/gdb/gdb.c:32

Fix this by making the functions involved in setjmp/longjmp as
noexcept, so that the compiler knows it doesn't need to emit the
_Unwind_SjLj_Register / _Unwind_SjLj_Unregister calls for C++
exceptions.

Tested on x86_64 Fedora 23 with:
 - GCC 5.3.1 w/ DWARF-based exceptions.
 - GCC 7 built with --enable-sjlj-exceptions.

gdb/ChangeLog:
2016-12-20  Pedro Alves  <palves@redhat.com>
    Yao Qi  <yao.qi@linaro.org>

PR gdb/20977
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New
noexcept function, factored out from ...
(gdb_rl_callback_read_char_wrapper): ... this.
(gdb_rl_callback_handler): Mark noexcept.

7 years agoSet emacs default mode for the GDB directory to C++
Antoine Tremblay [Tue, 20 Dec 2016 13:42:10 +0000 (08:42 -0500)]
Set emacs default mode for the GDB directory to C++

Since GDB has switched to C++ but the file names are still .c emacs does
not load the proper mode when opening files in the gdb directory.

This patch fixes that by enabling c++ mode.

This patch also fixes indentation tweaks as discussed in this thread:
https://sourceware.org/ml/gdb-patches/2016-12/msg00074.html

Indent with gdb-code-style.el included and the .dir-locals.el is as such:

namespace TestNameSpace {

class test
{
public:
  test test() {}

  int m_a;
};

struct teststruct
{
  int a;
}
}

gdb/ChangeLog:

* .dir-locals.el: Set c++ mode for the directory and set indent
properly.
* gdb-code-style.el: Set c-set-offset 'innamespace as a safe value
to be used in .dir-locals.el.

7 years agoMIPS16/opcodes: Respect ISA and ASE in disassembly
Maciej W. Rozycki [Tue, 20 Dec 2016 11:38:53 +0000 (11:38 +0000)]
MIPS16/opcodes: Respect ISA and ASE in disassembly

Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.

To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate.  Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.

opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.

binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.

gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

7 years agoMIPS/GAS/testsuite: Add RESTORE instruction to `mips16e' test
Maciej W. Rozycki [Tue, 20 Dec 2016 11:34:47 +0000 (11:34 +0000)]
MIPS/GAS/testsuite: Add RESTORE instruction to `mips16e' test

Add a RESTORE instruction smoke test to the `mips16e' GAS test.

gas/
* testsuite/gas/mips/mips16e.s: Add a RESTORE instruction.
* testsuite/gas/mips/mips16e.d: Adjust accordingly.

7 years agoMIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAs
Maciej W. Rozycki [Tue, 20 Dec 2016 11:33:49 +0000 (11:33 +0000)]
MIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAs

Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro',
`mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16
ISAs.

gas/
* testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16
ISA testing.
* testsuite/gas/mips/mips16-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16-macro.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation.
* testsuite/gas/mips/mips16e-64.l: Rename to...
* testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this.
* testsuite/gas/mips/mips16-64@mips16.d: New test.
* testsuite/gas/mips/mips16-64@mips16-64.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64',
`mips16-macro', `mips16-macro-t', `mips16-macro-e' and
`mips16e-64' testing across multiple MIPS16 ISAs.  Fold
`mips16-macro' and `mips16e-64' list test invocations into
corresponding dump tests.

7 years agoMIPS/GAS/testsuite: Implement individual MIPS16 ISA testing
Maciej W. Rozycki [Tue, 20 Dec 2016 02:23:51 +0000 (02:23 +0000)]
MIPS/GAS/testsuite: Implement individual MIPS16 ISA testing

Implement individual MIPS16 ISA GAS testing for the 32-bit and 64-bit
variants of the base MIPS16 and the MIPS16e ISA each.

gas/
* testsuite/gas/mips/mips.exp (run_dump_test_arch): Add
`mips16e' and `mips16' prefixes.
(run_list_test_arch): Likewise.
Rename `mips16' architecture to `mips16-32'.  Add `mips16-64',
`mips16e-32' and `mips16e-64' architectures.  Update `rol64',
`mips16e', `elf${el}-rel2' and `elf-rel4' test invocations
accordingly.
* testsuite/gas/mips/mips16e@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16e@branch-swap-4.d: New test.
* testsuite/gas/mips/mips16e@loc-swap-dis.d: New test.
* testsuite/gas/mips/mips16e@loc-swap.d: New test.

7 years agoMIPS/GAS/testsuite: Fix trailing padding in `loc-swap.s'
Maciej W. Rozycki [Tue, 20 Dec 2016 02:10:40 +0000 (02:10 +0000)]
MIPS/GAS/testsuite: Fix trailing padding in `loc-swap.s'

Pad alignment with zeros rather than NOP instructions, for sensible
multi-ISA MIPS16 testing.

gas/
* testsuite/gas/mips/loc-swap.s: Use zeros rather than NOPs for
trailing alignment padding.
* testsuite/gas/mips/loc-swap.d: Adjust accordingly.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap-dis.d: Likewise.

7 years agoMIPS16: Switch to 32-bit opcode table interpretation
Maciej W. Rozycki [Tue, 20 Dec 2016 02:03:40 +0000 (02:03 +0000)]
MIPS16: Switch to 32-bit opcode table interpretation

Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.

In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.

In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.

include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.

gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise.  Don't shift the instruction's
opcode with the `a' and `i' operand codes.  Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.

binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.

7 years agoMIPS16/opcodes: Correct 64-bit macros' ISA membership
Maciej W. Rozycki [Tue, 20 Dec 2016 01:53:03 +0000 (01:53 +0000)]
MIPS16/opcodes: Correct 64-bit macros' ISA membership

Limit the DDIV, DDIVU, DREM, DREMU and DSUBU macros to the MIPS III
rather than MIPS I ISA.  These macros expand to machine code sequences
including 64-bit instructions which require a 64-bit ISA.  Entries for
those instructions are already correctly marked, however the marking is
ignored if entries are used in the process of macro expansion rather
than directly, making it possible to indirectly produce 64-bit machine
code even when output requested has been limited to a 32-bit ISA.

opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the "ddiv", "ddivu", "drem", "dremu" and "dsubu"
INSN_MACRO entries.

gas/
* testsuite/gas/mips/mips16-macro.l: New list test.
* testsuite/gas/mips/mips.exp: Run the new test.

7 years agoMIPS16/opcodes: Correct I64/SDRASP opcode's ISA membership
Maciej W. Rozycki [Tue, 20 Dec 2016 01:50:24 +0000 (01:50 +0000)]
MIPS16/opcodes: Correct I64/SDRASP opcode's ISA membership

Limit the `SD ra, offset(sp)' instruction (I64/SDRASP major/minor
opcode) to the MIPS III rather than MIPS I ISA.  This is a 64-bit
instruction requiring a 64-bit ISA.  This bug has been there since
forever.

opcodes/
* mips16-opc.c (mips16_opcodes): Set membership to I3 rather
than I1 for the SP-relative "sd"/$ra entry (SDRASP minor
opcode).

gas/
* testsuite/gas/mips/mips16-sdrasp.d: New test.
* testsuite/gas/mips/mips16-sdrasp.l: New stderr output.
* testsuite/gas/mips/mips16-sdrasp.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.

7 years agoMIPS/GAS/testsuite: Correct NewABI test selection
Maciej W. Rozycki [Tue, 20 Dec 2016 01:49:02 +0000 (01:49 +0000)]
MIPS/GAS/testsuite: Correct NewABI test selection

Make sure all tests that require NewABI support are only run with
`has_newabi' targets, removing numerous `mips-sgi-irix5' failures.

gas/
* testsuite/gas/mips/mips.exp: Limit remaining tests that
require NewABI support to `has_newabi' targets.

7 years agoUpdate testsuite Makefile with missing dependencies.
Cary Coutant [Tue, 20 Dec 2016 09:03:55 +0000 (01:03 -0800)]
Update testsuite Makefile with missing dependencies.

2016-12-20  Cary Coutant  <ccoutant@gmail.com>

gold/
* testsuite/Makefile.am: Add missing dependencies on gcctestdir/ld
or ../ld-new.
* testsuite/Makefile.in: Regenerate.

7 years agoFix read-beyond-end-of-buffer error in script parsing.
Cary Coutant [Tue, 20 Dec 2016 03:19:46 +0000 (19:19 -0800)]
Fix read-beyond-end-of-buffer error in script parsing.

2016-12-19  Cary Coutant  <ccoutant@gmail.com>

gold/
PR gold/20949
* script.cc (Lex::get_token): Don't look ahead past NUL characters.

7 years agoCorrect assembler mnemonic for RISC-V aqrl AMOs
Andrew Waterman [Mon, 19 Dec 2016 06:53:54 +0000 (22:53 -0800)]
Correct assembler mnemonic for RISC-V aqrl AMOs

sc is a misnomer, because they aren't inherently sc.

* riscv-opc.c (riscv_opcodes): Rename the "*.sc" instructions to
"*.aqrl".

7 years agoFix disassembly of RISC-V CSR instructions under -Mno-aliases
Andrew Waterman [Mon, 19 Dec 2016 06:53:53 +0000 (22:53 -0800)]
Fix disassembly of RISC-V CSR instructions under -Mno-aliases

This fixes https://github.com/riscv/riscv-binutils-gdb/issues/36.

* riscv-opc.c (riscv_opcodes): Mark the rd* and csr* aliases as
INSN_ALIAS.