Ben Skeggs [Tue, 8 Jul 2008 02:51:29 +0000 (12:51 +1000)]
nv50: make use of nouveau drm 0.0.11 to get 3d going
Stephane Marchesin [Mon, 7 Jul 2008 23:34:36 +0000 (01:34 +0200)]
nv10: there are no 3D textures.
Stephane Marchesin [Mon, 7 Jul 2008 23:32:32 +0000 (01:32 +0200)]
nv04: Hook the lib into the build.
Stephane Marchesin [Mon, 7 Jul 2008 23:30:48 +0000 (01:30 +0200)]
nv04: use BEGIN_RING_NI
Stephane Marchesin [Mon, 7 Jul 2008 23:06:18 +0000 (01:06 +0200)]
nv04.
Younes Manton [Mon, 7 Jul 2008 02:04:29 +0000 (22:04 -0400)]
g3dvl: IDCT part 1.
Very basic IDCT support is in, performed CPU-side for now.
Younes Manton [Fri, 4 Jul 2008 00:05:32 +0000 (20:05 -0400)]
g3dvl: Round surfaces up to POT, use src rect when outputting surfaces.
Patrice Mandin [Fri, 4 Jul 2008 16:53:44 +0000 (18:53 +0200)]
nv30: Emit sampler state using state objects
Ben Skeggs [Fri, 4 Jul 2008 14:53:13 +0000 (00:53 +1000)]
Merge remote branch 'upstream/gallium-0.1' into gallium-0.1
José Fonseca [Fri, 4 Jul 2008 13:27:50 +0000 (22:27 +0900)]
scons: Enable gcc SSE2 intrinsics on x86.
Brian Paul [Thu, 3 Jul 2008 22:59:24 +0000 (16:59 -0600)]
mesa: added _vbo_VertexAttrib4f()
Brian Paul [Thu, 3 Jul 2008 22:24:26 +0000 (16:24 -0600)]
mesa: fix incorrect array size, added assertion
Brian Paul [Thu, 3 Jul 2008 22:23:18 +0000 (16:23 -0600)]
mesa: fix array storage allocation bug
Brian Paul [Thu, 3 Jul 2008 22:22:49 +0000 (16:22 -0600)]
mesa: regenerated file
Brian Paul [Thu, 3 Jul 2008 22:22:36 +0000 (16:22 -0600)]
mesa: additional vec4 constructor
Brian Paul [Thu, 3 Jul 2008 22:21:15 +0000 (16:21 -0600)]
mesa: fix various error codes
Brian Paul [Thu, 3 Jul 2008 22:02:13 +0000 (16:02 -0600)]
mesa: fix some error codes in _mesa_ShaderSourceARB()
Brian Paul [Thu, 3 Jul 2008 21:41:45 +0000 (15:41 -0600)]
mesa: fix problem freeing framebuffer/renderbuffer objects
Basically, set up no-op Delete() methods for the DummyFrame/Renderbuffer obj
Brian Paul [Thu, 3 Jul 2008 20:55:14 +0000 (14:55 -0600)]
gallium: added a4r4g4b4_put_tile_rgba()
Brian Paul [Thu, 3 Jul 2008 20:12:27 +0000 (14:12 -0600)]
mesa: added case for fixed pt
Brian Paul [Thu, 3 Jul 2008 18:56:33 +0000 (12:56 -0600)]
gallium: increase TGSI interpreter's number of temp registers to 64
Also, clean up the definitions of the misc/extra temp regs.
A few new assertions too.
Brian Paul [Thu, 3 Jul 2008 16:43:14 +0000 (10:43 -0600)]
gallium: move, increase ST_MAX_SHADER_TOKENS
Brian Paul [Thu, 3 Jul 2008 16:42:31 +0000 (10:42 -0600)]
gallium: increase TGSI_EXEC_MAX_COND_NESTING, etc
Patrice Mandin [Thu, 3 Jul 2008 20:47:15 +0000 (22:47 +0200)]
nv30: Reemit state when changing context
Patrice Mandin [Thu, 3 Jul 2008 20:42:30 +0000 (22:42 +0200)]
nv30: Emit viewport state using state objects
Patrice Mandin [Thu, 3 Jul 2008 20:31:23 +0000 (22:31 +0200)]
nv30: Emit polygon stipple state using state objects
Patrice Mandin [Thu, 3 Jul 2008 20:18:38 +0000 (22:18 +0200)]
nv30: Emit scissor state using state objects
Patrice Mandin [Thu, 3 Jul 2008 20:10:53 +0000 (22:10 +0200)]
nv30: Emit depth/stencil/alpha state using state objects
Patrice Mandin [Thu, 3 Jul 2008 19:48:18 +0000 (21:48 +0200)]
nv30: Emit rasterizer state using state objects
Patrice Mandin [Thu, 3 Jul 2008 19:25:47 +0000 (21:25 +0200)]
nv30: Emit blend state using state objects
Patrice Mandin [Thu, 3 Jul 2008 19:11:07 +0000 (21:11 +0200)]
nv30: Emit blend color state using state objects
Patrice Mandin [Thu, 3 Jul 2008 18:58:31 +0000 (20:58 +0200)]
nv30: Emit framebuffer state using state objects
Brian Paul [Thu, 3 Jul 2008 16:12:00 +0000 (10:12 -0600)]
gallium: fix surface memleak in bitmap code
Found w/ tunnel2.c demo.
José Fonseca [Thu, 3 Jul 2008 12:28:56 +0000 (21:28 +0900)]
pipebuffer: Silent warnings.
Although rarely hit in normal apps, they are too noisy with test suites.
José Fonseca [Thu, 3 Jul 2008 10:55:14 +0000 (19:55 +0900)]
Support conversion of YUV surfaces.
José Fonseca [Thu, 3 Jul 2008 10:52:05 +0000 (19:52 +0900)]
gallium: Don't forget to get overllaping blits working again.
Jakob Bornecrantz [Thu, 3 Jul 2008 10:12:25 +0000 (12:12 +0200)]
i915: EGL almost works again
Jakob Bornecrantz [Thu, 3 Jul 2008 10:10:36 +0000 (12:10 +0200)]
egl: Fix demodriver
José Fonseca [Thu, 3 Jul 2008 06:02:56 +0000 (15:02 +0900)]
gallium: Use surface_copy for 1:1 blits.
José Fonseca [Thu, 3 Jul 2008 03:42:23 +0000 (12:42 +0900)]
scons: Add a env.CodeGenerate method to simplify code generation via python scripts.
env.CodeGenerate(
target = 'my_source.c',
script = 'my_generator.py',
source = ['input.txt', 'another.txt'],
command = 'python $SCRIPT $SOURCE > $TARGET'
)
It will take care generating all appropriate dependencies, including any
module imported by the generator script, and the respective .pyc file
side effects.
Brian Paul [Thu, 3 Jul 2008 01:18:10 +0000 (19:18 -0600)]
mesa: fix vertex array validation test for attribute 0 (vert pos)
We don't actually need vertex array[0] enabled when using a vertex
program/shader.
cherry-picked from master
Brian Paul [Thu, 3 Jul 2008 01:11:49 +0000 (19:11 -0600)]
gallium: replace an assertion with "if (!texobj) continue"
It's possible to call update_samplers() between the time a fragment shader
is bound and when a texture image is defined (such as glClear). This
fixes the case where we don't have a complete texture object yet.
Brian Paul [Thu, 3 Jul 2008 01:07:11 +0000 (19:07 -0600)]
gallium: fix a bug in vertex program output mapping
Need to translate VERT_RESULT_PSIZ, BFC0, BFC1 to TGSI shader output slots
after all other attributes have been handled. This fixes a bug where
generic vertex program outputs (varying vars) could get mapped to the
same slot at point size or back-face colors.
Brian Paul [Thu, 3 Jul 2008 01:05:18 +0000 (19:05 -0600)]
gallium: nr_attrs was off by one, updated comments, minor code movement
Brian Paul [Wed, 2 Jul 2008 23:10:42 +0000 (17:10 -0600)]
mesa: additional GLSL built-in constants
Brian Paul [Wed, 2 Jul 2008 23:08:47 +0000 (17:08 -0600)]
mesa: when linking a shader program, make sure all the shaders compiled OK
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 23:08:28 +0000 (17:08 -0600)]
mesa: added some debug code (disabled)
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 23:08:09 +0000 (17:08 -0600)]
mesa: fix error codes in _mesa_shader_source(), _mesa_get_shader_source()
If the 'shader' parameter is wrong, need to either generate GL_INVALID_VALUE
or GL_INVALID_OPERATION. It depends on whether 'shader' actually names a
'program' or is a totally unknown ID.
There might be other cases to fix...
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 23:06:26 +0000 (17:06 -0600)]
mesa: regenerated file
Brian Paul [Wed, 2 Jul 2008 23:05:56 +0000 (17:05 -0600)]
mesa: added some missing equal() notEqual() intrinsics
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 18:47:18 +0000 (12:47 -0600)]
mesa: disable some debug assertions
We can sometimes fail these assertions because of how swizzled storage
works. Will revisit someday.
Brian Paul [Wed, 2 Jul 2008 18:46:18 +0000 (12:46 -0600)]
mesa: regenerated files
Brian Paul [Wed, 2 Jul 2008 18:45:55 +0000 (12:45 -0600)]
mesa: fix all(bvec2) function typo, add missing bvec2/3/4() constuctors
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 18:41:18 +0000 (12:41 -0600)]
gallium: replace 128 with MAX_LABELS
Brian Paul [Wed, 2 Jul 2008 18:40:03 +0000 (12:40 -0600)]
mesa: added _mesa_print_swizzle() debugging helper
Roland Scheidegger [Wed, 2 Jul 2008 18:08:27 +0000 (20:08 +0200)]
mesa: fix issues around multisample enable
multisample enable is enabled by default, however gl mandates multisample
rendering rules only apply if there's also a multisampled buffer.
Michel Dänzer [Wed, 2 Jul 2008 10:10:15 +0000 (12:10 +0200)]
gallium: Allow draw module to work on non-x86 platforms again.
José Fonseca [Wed, 2 Jul 2008 03:24:19 +0000 (12:24 +0900)]
pipebuffer: Debug buffer manager to detect buffer under- and overflows.
It should detect both cpu and gpu buffer overflows.
José Fonseca [Wed, 2 Jul 2008 03:22:51 +0000 (12:22 +0900)]
pipebuffer: Verify usage flag consistency. Minor cleanups.
Brian Paul [Wed, 2 Jul 2008 00:40:23 +0000 (18:40 -0600)]
mesa: fix a GLSL vector subscript/writemask bug
This fixes a failure for cases like:
vec4 v;
v[1] *= 2.0;
The v[1] actually acts like a writemask, equivalent to v.y
The fix is a bit convoluted, but will do for now.
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 00:39:46 +0000 (18:39 -0600)]
mesa: move some functions
cherry-picked from master
Brian Paul [Wed, 2 Jul 2008 00:39:22 +0000 (18:39 -0600)]
mesa: make _slang_swizzle_swizzle() non-private
cherry-picked from master
Brian Paul [Tue, 1 Jul 2008 17:48:57 +0000 (11:48 -0600)]
mesa: better function inlining in the presence of 'return' statements
Before, the presence of a 'return' statement always prevented inlining
a function. This was because we didn't want to accidentally return from
the _calling_ function. We still need the semantic of 'return' when inlining
but we can't always use unconditional branches/jumps (GPUs don't always
support arbitrary branching).
Now, we allow inlining functions w/ return if the return is the last
statement in the function. This fixes the common case of a function
that returns a value, such as:
vec4 square(const in vec4 x)
{
return x * x;
}
which effectively compiles into:
vec4 square(const in vec4 x)
{
__retVal = x * x;
return;
}
The 'return' can be no-op'd now and we can inline the function.
cherry-picked from master
Brian Paul [Tue, 1 Jul 2008 17:48:27 +0000 (11:48 -0600)]
mesa: add/fix some IrInfo entries for debugging purposes
cherry-picked from master
Jakob Bornecrantz [Tue, 1 Jul 2008 13:52:37 +0000 (15:52 +0200)]
i915: Last reference to surface -> pitch
José Fonseca [Tue, 1 Jul 2008 13:04:58 +0000 (22:04 +0900)]
gallium: Use the inline keyword on C++.
José Fonseca [Tue, 1 Jul 2008 13:04:01 +0000 (22:04 +0900)]
scons: Output mapfile on windows ddk profile builds.
Younes Manton [Mon, 30 Jun 2008 23:26:22 +0000 (19:26 -0400)]
g3dvl: Use block and stride instead of cpp and pitch.
Younes Manton [Mon, 30 Jun 2008 00:52:58 +0000 (20:52 -0400)]
g3dvl: Simplify shader code.
Younes Manton [Sun, 29 Jun 2008 00:16:01 +0000 (20:16 -0400)]
g3dvl: Support for field and frame based MC for progressive pictures.
MC support for frame and field based motion prediction. Also various bug
fixes, clean up.
Younes Manton [Thu, 19 Jun 2008 02:21:11 +0000 (22:21 -0400)]
g3dvl: Work around SP tex cache bug, specify resource usage flags.
Younes Manton [Tue, 17 Jun 2008 03:18:20 +0000 (23:18 -0400)]
g3dvl: Get rid of some Valgrind errors.
Get rid of some Valgrind memory leak and uninitialized var errors.
José Fonseca [Mon, 30 Jun 2008 03:49:14 +0000 (12:49 +0900)]
gles: Don't define GLAPIENTRY here.
Ben Skeggs [Sun, 29 Jun 2008 06:02:01 +0000 (16:02 +1000)]
nouveau: oops, bump the drm patchlevel back down again
Ben Skeggs [Sun, 29 Jun 2008 05:59:24 +0000 (15:59 +1000)]
nv50: fixes after rebase + commits note on the code that was just pushed.
OK, seems a lot of people have been getting the idea that nouveau is
dying lately - I decided to commit some of the work I've been doing lately
to prove them wrong :) Progress on my side is slow due to lack of time
mainly, but I'm still around.
Firstly, don't even bother trying to use gallium on G8x/G9x yet, it won't
work. I've deliberately left all the necessary winsys changes out of the
commits for a very good reason - I don't know what we're going to need from
the DRM exactly yet and don't want to be continually breaking interfaces
as I discover additional requirements. On my side, I think I've gone
through about 3 different DRM interface changes, and have just discovered
that I may need more yet. It'd be very annoying for everyone who uses
nouveau to keep things in sync. Once I've got it sorted - I'll commit a
lot of cool stuff. Stay tuned.
Also, don't look at the shader code.. it's horribly nasty and full of hacks,
I used it as an opportunity to learn G8x GPU programs at the same time.
New semi-decent code is in works, and will follow at some point. :)
Ben Skeggs [Tue, 24 Jun 2008 20:07:02 +0000 (06:07 +1000)]
nv50: reverse stencil sides, header is wrong
Ben Skeggs [Tue, 24 Jun 2008 20:01:30 +0000 (06:01 +1000)]
nv50: fix line stipple
Ben Skeggs [Tue, 24 Jun 2008 19:58:35 +0000 (05:58 +1000)]
nv50: don't multiply polygon offset units by 2.0 like on nv40
Ben Skeggs [Tue, 24 Jun 2008 19:17:08 +0000 (05:17 +1000)]
nv50: maybe some scissor fixes..
Ben Skeggs [Tue, 24 Jun 2008 19:11:46 +0000 (05:11 +1000)]
nv50: vpt translate/scale backwards
Ben Skeggs [Tue, 24 Jun 2008 18:57:27 +0000 (04:57 +1000)]
nv50: whoops
Ben Skeggs [Tue, 24 Jun 2008 18:53:34 +0000 (04:53 +1000)]
nv50: rework miptree/texture/texsurf code a bit
Ben Skeggs [Tue, 24 Jun 2008 17:56:57 +0000 (03:56 +1000)]
nv50: turn on depth test/write again, not 100% but winsys handles it better
Ben Skeggs [Mon, 23 Jun 2008 13:43:34 +0000 (23:43 +1000)]
nv50: maintain pipe surface status field
Ben Skeggs [Mon, 23 Jun 2008 13:42:53 +0000 (23:42 +1000)]
nv50: remove some debug
Ben Skeggs [Wed, 18 Jun 2008 03:23:00 +0000 (13:23 +1000)]
nv50: simplify emit_interp a bit
Ben Skeggs [Tue, 17 Jun 2008 13:55:23 +0000 (23:55 +1000)]
nv50: make sure static buffers (constbuf, tex control etc) get on reloc list
Ben Skeggs [Tue, 17 Jun 2008 13:52:41 +0000 (23:52 +1000)]
nv50: R32_FLOAT vbo format
Ben Skeggs [Tue, 17 Jun 2008 13:43:38 +0000 (23:43 +1000)]
nv50: move surface_map/unmap into nv50_surface.c
Ben Skeggs [Mon, 16 Jun 2008 15:51:13 +0000 (01:51 +1000)]
nv50: some people are just born stupid.. really..
Ben Skeggs [Mon, 16 Jun 2008 15:36:36 +0000 (01:36 +1000)]
nv50: make TEX a halfie
Ben Skeggs [Mon, 16 Jun 2008 12:34:50 +0000 (22:34 +1000)]
nv50: get tri-scissor-tri working
Ben Skeggs [Mon, 16 Jun 2008 12:24:16 +0000 (22:24 +1000)]
nv50: separate state validation and upload, similar to nv40
Ben Skeggs [Mon, 16 Jun 2008 12:06:54 +0000 (22:06 +1000)]
nv50: fix blend colour
Ben Skeggs [Mon, 16 Jun 2008 12:02:02 +0000 (22:02 +1000)]
nv50: use stateobjs for sampler/image_control uploads
Ben Skeggs [Mon, 16 Jun 2008 08:56:39 +0000 (18:56 +1000)]
nv50: hack of a TEX opcode
Ben Skeggs [Mon, 16 Jun 2008 08:03:29 +0000 (18:03 +1000)]
nv50: hacks for stuff I don't really get yet
Ben Skeggs [Mon, 16 Jun 2008 06:29:40 +0000 (16:29 +1000)]
nv50: abuse constbuf upload for program upload
Ben Skeggs [Mon, 16 Jun 2008 02:55:53 +0000 (12:55 +1000)]
nv50: a couple more bits'n'pieces
Ben Skeggs [Sun, 15 Jun 2008 05:53:22 +0000 (15:53 +1000)]
nv50: disable inline IMMD for now, IMMD+pred == BANG!
fixes progs/fp/lit.txt