gcc: switch to gcc 4.9 as the default version

Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: add support for gcc 5.1

This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:

 * Kept as is, sometimes after minor adjusments:

   100-uclibc-conf.patch
   301-missing-execinfo_h.patch
   810-arm-softfloat-libgcc.patch
   830-arm_unbreak_armv4t.patch
   840-microblaze-enable-dwarf-eh-support.patch
   850-libstdcxx-uclibc-c99.patch
   860-cilk-wchar.patch

 * Dropped:

   110-pr64896.patch
   111-pr65730.patch

 * Split in multiple parts:

   900-musl-support.patch

   The patches from Crosstool-NG for muls support are used instead of
   one single patch.

 * Renamed:

   910-gcc-poison-system-directories.patch to
   200-gcc-poison-system-directories.patch

   920-libgcc-remove-unistd-header.patch to
   201-libgcc-remove-unistd-header.patch

   Since the 9xx part of the series is now used by the various musl
   related patches.

We have tested the following configurations, with a minimal Busybox
system:

 * ARM, uClibc-ng
 * ARM, glibc
 * ARM, musl
 * x86, uClibc-ng and uClibc 0.9.33.2
 * x86, glibc
 * x86, musl

All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:

devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: bump uClibc-ng to 1.0.3

This commit bumps uClibc-ng to the latest version, and drops the two
patches that have been merged upstream.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python: bump to 2.7.10

Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.

[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qemu/configs: update to latest kernel

Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pinentry: fix build with Qt4

Help configure find the correct moc, as the comment in m4/qt.m4 states:

    #configure tried to run $ac_cv_path_moc and the test didn't
    #succeed. If configure shouldn't have tried this one, set
    #the environment variable MOC to the right one before running
    #configure.

Fixes:
    http://autobuild.buildroot.org/results/06c/06c5c2762ec22271fec20a6d15548011e40875d1
    http://autobuild.buildroot.org/results/0d7/0d78a2ff8c952cd104794f5049b07216978fdf11
    http://autobuild.buildroot.org/results/af8/af8f7f588dfa64d82c98a4b42ec78fd17dde137c

Also fixes using the host moc:
    http://autobuild.buildroot.org/results/836/836962f23dcad77b145fcdfeffb40e38e64d6971

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

btrfs-progs: bump to version 4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.9.1-6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tiff: security bump to version 4.0.4

Fixes:
CVE-2014-8128 - Check memory allocations for failure. Also check
multiplication overflow.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: fix egl detection

Some egl implementations needs special compiler flags or defines (E.G.
mesa3d for wayland needs to pass -DMESA_EGL_NO_X11_HEADERS to not try to
include X11 headers).  This is correctly included in the .pc file, but the
configure logic doesn't use pkg-config so help it along.

Likewise, some implementations may need to link against other libraries, so
also pass LIBS.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: add support for opengl

Commit 83e29f2656a237e2c300d523776868837d3bc646 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration option for the
eglglessink plugin as a consequence of its removal in 1.3.1. However,
that commit did not add support for glimagesink, the plugin element to
be used as a replacement, which broke support for the EGL/GLES video
sink feature in Buildroot.

This new commit adds support for the OpenGL library and the
corresponding gl plugin, including the glimagesink element among others.

The plugin needs the library, but the library can also be used
separately in order to link custom plugins or applications against it.

The library needs at least one OpenGL API, one OpenGL platform and one
compatible window system. The implementations of these requirements that
Buildroot can currently provide are:
 - APIs: OpenGL, OpenGL ES 2.X,
 - platforms: GLX, EGL,
 - window systems: X11, Wayland, Dispmanx.

The wayland configure feature switch is shared between the corresponding
OpenGL library window system and the waylandsink plugin.

This has been tested with videotestsrc/omxmpeg4videodec/omxh264dec and
glimagesink on the Raspberry Pi, using OpenGL ES 2.X, EGL and Dispmanx.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: add 4.1.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add 4.1.x choice for headers

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openvmtools: fix legal info

In ab71dff0 it was moved to SUBDIR, but this was never reflected for the
legal-info files, update this to fix:
http://autobuild.buildroot.net/results/836/8363943cc9c967713f585209408ea087a052a12d/

[Thomas: put OPENVMTOOLS_SUBDIR before OPENVMTOOLS_LICENSE_FILES, as
suggested by Yann.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 10.6.0

Mesa3d 10.6 adds optional support for SHA-1:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=a24bdce46f95cbe9efd3b26f157d1eb36584861f

Adding "--without-sha1" will cause this failure during configure:

configure: error: Illegal value for --with-sha1: no

so I did not add the else-clause when no SHA-1 provider is enabled.

[Thomas: simplify else ifeq.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/feh: bump to version 2.13.1, add hash file

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gdb: gdb+expat build fix

Commit 23413b51b2308225584b65c2fcd800ca8f7c56af added --with-expat
configure option and expat dependency when BR2_PACKAGE_EXPAT is
configured.  When cross-compiling, gdb configure fails because the host
system libexpat is referenced.

Configuring gdb with
--with-libexpat-prefix=$(STAGING_DIR)/usr
fixes the reference and allows gdb to build successfully.

Tested with arm-buildroot-linux-gnueabihf toolchain.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gpm: change archive to lzma

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-generic: support for lzma archives

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

directfb: add an option for debugging support

DirectFB provides two options for debug:
* --enable-debug-support (default is yes)
* --enable-debug (default is no)
The first one provides the functions to print debug information. These
functions can be called inside DirectFB, or by an external DirectFB
driver in another package.
The second one enables verbose mode in DirectFB, using these functions.

Buildroot currently provides an option for the second one only. The
first one - which is necessary for the second one - is always enabled,
because this is the default value.

The new option (BR2_PACKAGE_DIRECTFB_DEBUG_SUPPORT) makes it possible
to disable debugging support (--disable-debug-support) in order to
build the library with no debug feature at all.

When debugging support is disabled, the target installation path of
drivers (/usr/lib/directfb-<version>) is suffixed with -pure. The
public library (/usr/lib/libdirectfb.so) remains unchanged.

Some external DirectFB drivers will install into
/usr/lib/directfb-<version>-pure in release mode. For that reason, it
is important that DirectFB can be configured to use this directory.

Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: make /bin/sh symlink use relative path

The symlink created by buildroot for /bin/sh is the full path to
a shell.  This does not match what busybox and other Linux
distributions do with using relative path symlinks. When handling
files on the host system this will point to the host system's shell
if present and not the target shell.

This is fixed by changing the /bin/sh symlink to use a relative path.

Fixes #8161.

[Thomas: minor fixups to the commit log suggested by Yann E. Morin.]

Signed-off-by: Matthew Starr <mstarr@hedonline.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-lxml: bump to 3.4.4

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-vesa: bump to version 2.3.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: bump to version 1.17.2

Removed patches committed upstream:
http://cgit.freedesktop.org/xorg/xserver/commit/os/backtrace.c?h=server-1.17-branch&id=8b7e1f362bf6940eb863fd02395bf8155d10604b
http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/sdksyms.sh?h=server-1.17-branch&id=7a45d1684f626f3045305328c3aab85eed0673ea

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

agentpp: bump to 4.0.4

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmppp: bump to 3.3.5

Also add a hash file.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

a10disp: bump to version v0.6.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sunxi-boards: bump to version a6a4e94066f4ec6b26fc7060dc453a6bcf26a504

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: bump to version 1.8.0

- Bump to version 1.8.0
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wayland: bump to version 1.8.1

- Bump to version 1.8.1
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tor: bump to version 0.2.6.9

- Bump to version 0.2.6.9
- Update hash file
- Adapt patch to new version

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

postgresql: bump to version 9.4.4

- Bump to version 9.4.4
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pinentry: bump to version 0.9.4

- Bump to version 0.9.4
- Update hash file
- Remove upstreamed patches

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fluxbox: explicitly configure optional dependencies

The following commit explicitly configures optional dependencies based
off the respective package selections for a given configuration.

In addition, this commit also cleans up some obsolete/incorrect
arguments. With the introduction of (at least) Fluxbox 1.3.7, the
'--with-imlib2-prefix' argument no longer exists. The argument
'--with-xpm-prefix' has never existed; it was accidentally committed
mimicking the configuration used to provide imlib2.

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnuradio: add processing blocks

GNURadio provides a set of processing blocks like analog or digital
communication, filters, ...

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[build-tested only]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

host-gettext is needed since
https://github.com/tvheadend/tvheadend/commit/bad281a9f5bbb8e7f968d400f8096908dfd798b9#diff-e2d5a00791bce9a01f99bc6fd613a39d

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dnsmasq: bump to version 2.73

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpfr: bump to version 3.1.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.4.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: bump to version 2.02.121

- Bump to version 2.02.121
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lftp: bump to version 4.6.3a

- Bump to version 4.6.3a
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump to version 2.4.4

- Bump to version 2.4.4
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyinotify: bump to 0.9.6

Remove hash file as the project doesn't provide manual tarballs
on GitHub.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua: bump to version 5.3.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: bump to 4.2

Add md5 from pypi.python.org.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tmux: bump to 2.0

Add new location as tmux moved to GitHub.

Remove the patch as it was already merged upstream.
Remove related AUTORECONF as well.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zedboard: Upgrade to Linux xilinx-v2015.1 (3.18)

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: bump to version 1.12.6

- Bump to version 1.12.6
- Update hash file

The following vulnerabilities have been fixed in 1.12.6:

 - wnpa-sec-2015-19
   WCCP dissector crash. (Bug 11153)
 - wnpa-sec-2015-20
   GSM DTAP dissector crash. (Bug 11201)

[Thomas: indicate that this is a security related updated in the
commit log, as suggested by Gustavo.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: bump to version 7.43.0

- Bump to version 7.43.0
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fluxbox: fix build against xlib_libXpm

Explicitly configure XPM support based on the library selection provided
(BR2_PACKAGE_XLIB_LIBXPM). It has been observed on different hosts that
XPM support may or may not be included based off the state of the host's
system. One can validate XPM support is included in Fluxbox by using the
command `fluxbox -info`.

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netifaces: add hash file

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hdparm: bump to 9.48

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{12,18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: new package

[Thomas:
 - remove S01audit, which isn't completely compliant with the
   Buildroot style.
 - make the package available only on architectures for which the
   system call tables are available, and add some comments about this
   in the .mk file.]

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

setools: new package

[Thomas:
  - remove HOST_AUTORECONF = YES, since it is implied by AUTORECONF = YES.]

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: Add host build support

Host sqlite is required by the host build of the setools package which
is required for SELinux support.

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lftp: indicate why autoreconf is needed

We no longer have any patch touching configure.ac/Makefile.am, so one
might wonder why we're autoreconfiguring the package. The reason is
that our libtool patch doesn't apply on the code provided by the lftp
tarball.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lftp: bump version to 4.6.2

0001-Remove-unused-libraries-path.patch has now been applied upstream,
so remove it from Buildroot.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openvmtools: introduce SUBDIR variable and update patches

The Open-vm-tools package is now distributed from GitHub and a new
subdirectory was introduced, which breaks the Buildroot process.

This patch adds the _SUBDIR variable in the Makefile and also updates
all distributed patches.

Fixes:

http://autobuild.buildroot.net/results/bfd10c8d454a2686ebb1c4afdb49c55e39a9dd67/

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gpm: add hash file

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/modem-manager: bump to version 1.4.8

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/network-manager: bump to version 1.0.2

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

eudev: add enable/disable hwdb option

This option enables/disables installation of the eudev hardware database,
which provides various extra properties for known devices.
Enabling this option adds ~5MB to the rootfs size.

The option is enabled by default in order to preserve old behavior.

[Peter: extend commit message]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: bump version

Remove wl18xx-conf.bin as it was already removed from
upstream repository.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsoc: bump to 0.6.4

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mxml: add hash file

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openvmtools: move to GitHub

The Open-vm-tools project is moved to GitHub.
Hash file removed.
Major version variable removed.

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libtirpc: bump version

Bump to version 0.3.1:
  - update our patches
  - rename patches for proper numbering
  - drop patch 0007, applied upstream

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3: download via custom git url

This patch adds the option to download at91bootstrap3 from
a custom git URL. This is a requirement for all that boards
that use a custom at91bootstrap3 version.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3: bump to version 3.7.2

This patch bumps at91bootstrap3 version to 3.7.2

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3: add license information

This patch adds licensing informations to at91bootstrap3

[Thomas:
 - change from "BSD-2c with endorsement clause" to "Atmel License",
   because the license of AT91Bootstrap is neither a BSD-2c nor a
   BSD-3c: it does not carry the second clause of the BSD-2c or BSD-3c
   licenses giving the condition of redistribution of the binary form.]

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

automake: use whenever possible the ACLOCAL_HOST_DIR variable

Use the ACLOCAL_HOST_DIR in the GTK_DOC_M4_INSTALL hook.

Move the ACLOCAL_HOST_DIR definition at the beginning so the definition
is ahead the utilization.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/iso9660: add support for grub2

After having extended the iso9660 support to allow isolinux as an
alternative to grub, this commit adds grub2 as a third
alternative. With the previous work done to support isolinux, adding
support for grub2 is fairly trivial.

[Thomas: set timeout to 10 seconds and not 5 seconds, in order to
match the configuration used for grub.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

grub2: prepare and install El Torito image

In order to support ISO9660 bootable images that rely on Grub 2, this
commit modifies thr Grub 2 makefile to generate and install an El
Torito image. Such an image is simply produced by concatenating the
cdboot.img provided by Grub 2, and the Grub 2 image generated by
Buildroot using grub-mkimage.

Since this action is so simple and cost-free, we don't bother adding a
Grub 2 sub-option for that, and simply generate the El Torito image
unconditionally.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: add hybrid image support

This commit adds a new option, which allows, when isolinux is used as
the bootloader, to generate an "hybrid" ISO image. Such images can
either be booted from CD-ROM or from USB keys. It simply uses the
isohybrid tool provided by syslinux.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: add isolinux support

After all the preparation commits, this commit finally adds the
iso9660 support itself. Besides adding a new Config.in entry, a little
bit of .mk code and the isolinux.cfg default configuration, not much
is needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: use 'depends on' instead of 'select' for bootloader

In preparation to the introduction of the support for other
bootloaders than Grub, this commit switches from having the iso9660
support "select" the necessary bootloader to using a "depends on".

The main motivation is that the isolinux bootloader support will
really need to do a "depends on", due to the need of having a certain
option enabled, but this option being a kconfig "choice".

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: introduce bootloader choice

In preparation to the introduction for the support of other
bootloaders than Grub, this commit adds a "choice ... endchoice" block
with just the Grub option, and adds some conditionals in the
iso9660.mk code for the Grub specific parts.

Of course, for now those conditionals are a bit useless with just this
commit, but they become useful with the followup commits.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: introduce new variables

In preparation to the introduction of the support for other
bootloaders that Grub, this commit introduces two new variables:

 - ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH, which gives the full path to
   the bootloader configuration file

 - ROOTFS_ISO9660_BOOT_IMAGE, which gives the relative path of the
   main bootloader image, as needed by genisoimage's -b option.

There are no functional changes made, as the variables are for now
always set to the same value.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: support building a real iso9660 filesystem

Until now, the iso9660 filesystem handling only supported using an
initrd/initramfs to store the root filesystem, which is very different
from what we do with the other filesystems.

This commit changes the iso9660 logic to also allow using directly an
iso9660 filesystem to store the root filesystem. A new option,
BR2_TARGET_ROOTFS_ISO9660_INITRD, is created to tell the iso9660 that
we want to use an initrd and not directly the root filesystem in
iso9660 format. This option defaults to 'y' to preserve the existing
behavior.

After this commit, we therefore have three possibilities:

 * BR2_TARGET_ROOTFS_ISO9660=y, with BR2_TARGET_ROOTFS_INITRAMFS and
   BR2_TARGET_ROOTFS_ISO9660_INITRD disabled. In this case, the
   iso9660 filesystem is directly the contents of the root filesystem
   (since is possible thanks to the Rockridge extensions that were
   already enabled using the -R option of genisoimage). Obviously, it
   means that the root filesystem is read-only.

 * BR2_TARGET_ROOTFS_ISO9660=y and BR2_TARGET_ROOTFS_INITRAMFS=y (the
   value of BR2_TARGET_ROOTFS_ISO9660_INITRD doesn't matter). In this
   case, the root filesystem is already linked into the kernel image
   itself, as an initramfs. So the iso9660 filesystem doesn't contain
   the root filesystem as is, but just the bootloader and the kernel
   image.

 * BR2_TARGET_ROOTFS_ISO9660=y, BR2_TARGET_ROOTFS_ISO9660_INITRD=y and
   BR2_TARGET_ROOTFS_INITRAMFS disabled. In this case, a separate
   initrd is used. The iso9660 filesystem only contains the
   bootloader, the kernel and the initrd.

In order to support the first case out of the box, root=/dev/sr0 is
added on the kernel command line in the example Grub configuration
file, so that the kernel knows where the root filesystem is
located. This argument is ignored when initrd/initramfs are used.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: prepare cleaner kernel/initrd path handling

The iso9660.mk modifies the menu.lst file from Grub to set the correct
initrd/kernel image locations. However, with the upcoming support of
other bootloaders for iso9660 filesystems, we need to modify a bit
this logic.

Instead of relying on the specific details of the grub menu.lst
syntax, we introduce the __KERNEL_PATH__ and __INITRD_PATH__ magic
keywords, which iso9660.mk will replace by the appropriate
values. They can therefore be used where needed in grub menu.lst, and
in similar configuration files of other bootloaders, as will be
supported in the following commits.

Also, in order to be consistent with the soon to be introduced support
for having the root filesystem itself as iso9660, this commit changes
the installation location of the initrd and kernel. Instead of being
/initrd and /kernel, they become /boot/initrd and
/boot/$(LINUX_IMAGE_NAME).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: get grub splash from $(TARGET_DIR)

Instead of using directly the splash image from the Buildroot source
directory boot/grub, this commit changes the iso9660 logic to use the
splash image installed in $(TARGET_DIR)/boot/grub.

This effectively allows a user to use a custom splash image by
installing it to $(TARGET_DIR) through a rootfs overlay or using a
post-build script.

Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: change the location of the splash image

In order to simplify the introduction of the support for using ISO9660
as the real root filesystem, this commit changes the location of the
grub splash image. This makes it match where the splash image is
located in $(TARGET_DIR), so that regardless of whether the
initrd/initramfs solution or the real iso9660 filesystem solution are
used, the splash image is installed at the same location.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: rename all variables to use the ROOTFS_ISO9660 prefix

For consistency reasons, this commit renames all internal variables of
iso9660.mk to use the ROOTFS_ISO9660 prefix.

While we're at it, replace a useless ':=' by '='.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: enable Joliet extension

We already enable the Rockridge extension by default when building
ISO9660, so let's also enable the Joliet extension which allows to
support Unicode file names and long file names.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: convert to the filesystem infrastructure

This commit converts the iso9660 logic to the common rootfs
infrastructure. What previously prevented it from being converted is
that the iso9660 logic needed to remove a temporary folder after the
image has been created.

However, since Buildroot typically keeps build artefacts around, this
commit changes the logic to keep this temporary folder around. Thanks
to this change, converting to the common rootfs infrastructure becomes
possible.

In addition, the temporary folder is renamed from $(BUILD_DIR)/iso9660
to the more descriptive $(BUILD_DIR)/rootfs-iso9660.tmp.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: use if ... endif block instead of depends on

In preparation to the addition of numerous additional options to the
iso9660 filesystem logic, use a if ... endif block instead of a
depends on for the only option that currently exists.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/upmpdcli: bump to version 0.11.0

upmpdcli 0.11.0 requires libupnpp 0.11.0 and does not build with the previous
version 0.8.6 of libupnpp.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: bump to version 0.11.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libuv: bump to version 1.6.1

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/zic: bump version to 2015e

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tzdata: bump version to 2015e

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libgpg-error: Fix compilation with gcc5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: Fix sdksyms.sh to cope with gcc5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: remove Xtensa specific version

Since we now have uClibc-ng, and it is used as the default uClibc
version, there is no real need to keep the Xtensa version: this
version is just a specific Git revision of uClibc master branch, and
uClibc-ng is also based on uClibc master branch.

In addition, since in the choice of uClibc versions, uClibc-ng is
already *before* the Xtensa specific version, uClibc-ng has in fact
already been the default uClibc version for Xtensa since uClibc-ng
support was introduced.

See for example:

  http://autobuild.buildroot.org/results/c85/c854fae31d82e0f11d5a8b5bfc196c29bd7e21db/config

for a build on Xtensa with the internal toolchain, where in fact
uClibc-ng is used instead of the Xtensa specific version.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>

uclibc: use uClibc-ng by default

Since the uClibc project is not making any release since about 3
years, and the uClibc-ng project is now alive and delivering regular
releases based on uClibc master plus a number of fixes, let's make
uClibc-ng the default uClibc version used by Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

package/musl: bump to version 1.1.10

A new regression in uselocale made it into this release. As suggested [1] by the
musl maintainers add a patch from upstream [2] to avoid breaking programs that
call uselocale.

[1]
http://www.musl-libc.org/download.html

[2]
http://git.musl-libc.org/cgit/musl/patch/?id=63f4b9f18f3674124d8bcb119739fec85e6da005

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>