package/libdrm: bump version to 2.4.83

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bcusdk: enable tpuarts support in eibd

This commit will enable tpuarts in eibd as well. tpuarts is as
important as FT1.2 support, which is already enabled by default.

This causes a 8 KB increase of the installed size in /usr/bin (728 KB
instead of 720 KB for /usr/bin), so not enough to justify a separate
configuration option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/weston: bump version to 3.0.0

Added all hashes provided by upstream.

Removed dependency to mtdev after:
https://github.com/wayland-project/weston/commit/167bbb6d109c7c93be3b58232f8c5b8795df44f2

libdrm is now a hard dependency:
https://github.com/wayland-project/weston/commit/b030897b380be4ac8089deecc3db6967dfe7923e

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: drop "select BR2_PACKAGE_LIBDRM" from sub-option, now that it
is selected by the main option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wayland: bump version to 1.14.0

Added all hashes provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wayland-protocols: bump version to 1.10

Added all hashes provided by upstream.

Upcoming mesa3d 17.2.0 needs version >= 1.8:
https://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?h=17.2&id=02cc359372773800de817950aebdf9be2c7973d1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uhubctl: new package

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: Add QLogic FC Adapters

Add a config option to install the ql2xxx firmware binaries for QLogic
Fibre Channel adapters.
Since this doesn't quite fit under the existing categories in Config.in,
include it under a new category named "Fibre Channel Adapter Firmware".

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scancpan: catch exception when MANIFEST is missing

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-sax-base: bump to version 1.09

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-namespacesupport: bump to version 1.12

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-libxml: bump to version 2.0129

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-uri: bump to version 1.72

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-time-hires: bump to version 1.9746

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-path-tiny: bump to version 0.104

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-ssleay: bump to version 1.81

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-http: bump to version 6.16

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-dns: bump to version 1.12

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-mojolicious: bump to version 7.43

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-module-build: bump to version 0.4224

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-mail-dkim: bump to version 0.42

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-libwww-perl: bump to version 6.26

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-io-socket-ssl: bump to version 2.050

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-http-message: bump to version 6.13

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-http-cookies: bump to version 6.04

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-file-util: bump to version 4.161950

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libepoxy: bump to version 1.4.3

Among other small fixes, the new version fixes crashes when running in
X11 without GLX (i.e. using EGL). Additionally, the changes from patch
"0002-Make-EGL-support-optional.patch" were committed upstream, and the
file can be dropped.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lzo: switch to cmake

autoreconf for the host package is broken after bumping to 2.10:
http://lists.busybox.net/pipermail/buildroot/2017-August/200634.html

To solve the problem we switch to cmake.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx-usb-loader: bump to latest commit

The current commit is from Sep 23, 2016. Update to latest commit from
Jul 11, 2017 to add support for i.MX6ULL processors.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 17.1.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6q-sabresd_qt5: Remove BR2_TOOLCHAIN_BUILDROOT_GLIBC

There is no need to select BR2_TOOLCHAIN_BUILDROOT_GLIBC, so just remove it.

Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/samba4: bump version to 4.6.7

Release notes: https://www.samba.org/samba/history/samba-4.6.7.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: Add support for imx7dpico board

Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.

For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc

Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
 - add upstream references for the Linux kernel patches
 - fix typoes in readme.txt
 - remove audio-related packages in defconfig
 - regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

get-developers: add option to get developers for files

The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...

Add a '-f' option that allows to give a list of files for which to get
the developer(s).

Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sysdig: fix incorrect module name

Latest version of sysdig introduced a variable for the kernel module
name. This patch updates that variable into Makefile.in.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-twisted: bump to version 17.5.0

Also fix/add runtime dependencies: Automat and hyperlink modules.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-automat: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: properly wrapped Config.in help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-m2r: new package

Host variant is needed to generate long description
for python-automat package.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-mistune: add host variant

Host variant is required by host-python-m2r.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/kodi-pvr-mythtv: bump version to 4.15.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/tor: bump version to 0.3.0.10

Release notes: https://blog.torproject.org/blog/tor-03010-released

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

python-netifaces: bump to version 0.10.6

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/sysdig: bump to version 0.17.0

This patch bumps sysdig to version 0.17.0 and updates the
dependencies accordingly.

According to [1], the minimum GCC version is 4.8 so encode that as
well.

[1] https://www.sysdig.org/wiki/how-to-install-sysdig-from-the-source-code/

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout: also bump gcc dependency to 4.8]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/jq: install to staging

Install the libraries to staging to be usable by other packages.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libb64: new package

This patch adds libb64, a library of ANSI C routines for fast
encoding/decoding data into and from a base64-encoded format.

The package contains a static library, headers, and an executable.
The latter, however, requires C++ and offers no advantages over busybox
or coreutils base64, so it is not installed. Therefore, nothing is
installed to target.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout:
- properly wrap Config.in
- move from Crypto to Other menu
- don't install to target
- don't make headers executable
- don't add -D to install with multiple source files
- extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/python-pillow: bump to version 4.2.1

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

libcgi: bump to version 1.1

Cleanup the libcgi package,
by using https://github.com/rafaelsteil/libcgi as an upstream.
Remove old patch and use cmake to build new version.

Signed-off-by: Joe Lin <xlcwu.taiwan@gmail.com>
[Mario:
- Use github URL in Config.in
- Use upstream sha256 hash]
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
[Arnout:
- Add reference to upstream hash file
- Remove unneeded LIBCGI_SUPPORTS_IN_SOURCE_BUILD = NO]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libhttpparser: bump version to 2.7.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mono: bump to version 5.0.1.1 and monolite to version 1050001000

This patch bumps to mono 5.0.1.1 and updates the unit tests patch
accordingly.

The latest version of mono carries a bit of changes in the monolite
package: the version string changes and from now on, monolite should
be installed in a subdirectory with the exact version string as a name.
Therefore, mono and monolite are bumped in a single commit.

Patch 0004, although applied in upstream master, is not yet in this
(stable) release.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout: squashed the patches, removed /usr part from HOST_DIR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/stella: bump version to 5.0.1

Removed 0003-Use-gnu-11-standard-to-prevent-errors-on-PPC.patch, since
stella now uses -std=c++14 that builds fine when using PPC altivec
vectorization.

Removed 0004-gcc7.patch, backported from upstream.

Update toolchain dependencies to gcc 4.9 since codebase now uses C++14 features.

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Arnout: also remove 0004-gcc7.patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Merge branch 'master' into next

This is in preparation of bumping the stella package, which is also
modified in master.

package/fontconfig: bump version to 2.12.4

Removed patch applied upstream:
https://cgit.freedesktop.org/fontconfig/commit/?id=1ab5258f7c2abfafcd63a760ca08bf93591912da

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/erlang-jiffy: bump version to 0.14.11

Removed ERLANG_JIFFY_SET_VERSION_HOOK, not needed anymore after
https://github.com/davisp/jiffy/commit/d596d890bcc7d74d34d185854873ba678bbf237b

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mksh: bump version to R55

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/minizip: bump version to 1.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/memcached: bump version to 1.5.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mdadm: bump version to 4.0

This version of mdadm can optionally use the corosync and libdlm
packages. However, it checks for their presence by directly probing the
host /usr/include, which fails for cross-compilation:

http://git.neil.brown.name/?p=mdadm.git;a=commitdiff;h=7716570e6d906e7326f83d466f6ba73009649d03#patch2
http://git.neil.brown.name/?p=mdadm.git;a=commitdiff;h=d15a1f72bd92bc4724ee94b2ae8132633ffeb72b#patch1

Since Buildroot doesn't package either corosync nor libdlm, disable
them explicitly with -DNO_COROSYNC -DNO_DLM.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mcelog: bump version to 153

Removed patch applied upstream:
https://git.kernel.org/pub/scm/utils/cpu/mce/mcelog.git/commit/?id=524ed1cd16de5adcb4a5015777d3dfc63afda1fe

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lzo: bump version to 2.10

Added locally computed sha256 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lzip: bump version to 1.19

Switched to sha256 hash provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/lvm2: bump version to 2.02.173

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/luvi: bump version to 2.7.6

Switched to github helper because upstream does not provide the tarball
anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/luv: bump version to 1.9.1-1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libuv: bump version to 1.13.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/logsurfer: use hashes provided by upstream

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/logrotate: bump version to 3.12.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/log4cpp: bump version to 1.1.3

Added sha256 hash, removed patch applied upstream:
https://sourceforge.net/p/log4cpp/codegit/ci/fe4ed0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

fs/squashfs: honour the number of parallel jobs

By default, mksquashfs uses all the CPUs available, like us with
BR2_JLEVEL=0.

However, by setting BR21_JLEVEL to non-zero, a user volutarily limits
the number of jobbs allowed to run concurrently (for various reasons,
like this is not a priority task on the machine; or like the
autobuilders, to spread the load accross multiple runs without
overloading the machine).

So, propagate tthe parallelisn settings down to mksquashfs, to repect
the user's will.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Tested-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libatomic_ops: bump version to 7.4.6

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/{mesa3d, mesa3d-headers}: bump version to 17.1.6

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/sqlite: bump version to 3200000 (3.20.0)

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

expat: bump to version 2.2.3

Drop the XML_POOR_ENTROPY workaround. Upstream commit fd9581a34e5665
(Never require XML_POOR_ENTROPY for "./configure && make") fixes this
issue.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

ficl: fix build with gcc 7

gcc 7 with -Os (optimize for size) takes the liberty to remove the code
of inline functions entirely - which is indeed allowed according to the
C99 standard, cfr. this [1] very complete StackOverflow answer. This
leads to undefined function references at link time.

The proper approach is to patch the code to use 'static inline'
instead. However, for various reasons such a patch is not entirely
trivial, and upstream has not moved since 7 years, so instead take the
simpler approach of restoring the gcc original inline behaviour with
-fgnu89-inline to fix this issue.

Fixes http://autobuild.buildroot.org/results/d72/d72a7e9775a10bc884b9953dd2eba3ad32100cca

[1] https://stackoverflow.com/questions/6312597/is-inline-without-static-or-extern-ever-useful-in-c99

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/stella: fix gcc7 support

Fixes
http://autobuild.buildroot.net/results/6ed/6edd7950c402dbf433f3904193c645ebc8531c7e/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Revert "package/skeleton-custom: also check for missing directories"

This partially reverts commit cf6d321e9d5c9dec63e42466fec4bf5de5853bd3.

The underlying reason for doing the checks is to ensure that a
merged-usr setting is properly enforced, even for custom skeletons.

Before that patch, a custom skeleton where both /bin and /usr/bin were
missing was accepted; but then the first package that intalled something
in /bin would create it as a directory, thus breaking the merged-usr
situation. Ditto sbin and lib, of course.

cf6d321 was created to detect that situation, and the fix was to require
that both directories do exist in the custom skeleton, so that we new
the check for consistency were OK, in all cases.

However, that broke existing skeletons which where missing both
directories, and some people are shinning about it...

The crux of the problem is that Buildroot should be responsible for
creating the directories or the symliks when they are missing, and only
fail if the existing ones are incorrect, but not impose the burden on
the user.

A situation where the problem arises is when a skeleton is shared
between various builds, some using a merged-usr while other do not.

We fix that by reverting the offending changes change, back to the
previous behaviour. We keep the stderr redirection in stat calls, and
the variable renaming.

A proper fix to create the missing directories can be added later.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

uclibc: allow thread_db to be built with C++

gdb 7.12+ is compiled and linked with C++, therefore the thread_db
headers need to use extern "C", to be usable for C++ code.

Fixes:
 Issue when building gdbserver for m68k-coldfire:

thread-db.o: In function `thread_db_init()':
thread-db.c:(.text+0x5b6): undefined reference to `td_ta_new(ps_prochandle*, td_thragent**)'
thread-db.c:(.text+0x61e): undefined reference to `td_thr_get_info(td_thrhandle const*, td_thrinfo*)'
thread-db.c:(.text+0x632): undefined reference to `td_symbol_list()'
...

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

pkg-cmake.mk: set pkg-config env. vars. in the host configure environment

This change is fixing the bug reported in [1].

Cmake may run pkg-config to find the dependencies when configuring a
package. Because of the value of PATH, and it will use the Buildroot's
pkg-config wrapper, which, by default, is configured (via some
environment variables) to find the target dependencies.

When configuring a host package using cmake, to prevent cmake from
wrongly solving dependencies from the target tree (when the
*-config.cmake files are using pkg-config) instead of looking for them
in the Buildroot's host tree or in the host system itself, we need to
set the environment variables altering the pkg-config behavior in the
cmake configure environment.

So, this change is fixing the cmake host-packages configuration step,
by properly setting the pkg-config environment variables to their values
for finding host dependencies.

Before this patch:

  make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
  [...]
  >>> host-mariadb 10.1.25 Configuring
  (mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin"  /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib"
  -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++"  -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1=""  -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF  -DWITH_SSL=bundled )
  -- Running cmake version 3.8.2
  [...]
  -- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
  [...]
  -- Found LibXml2: /opt/br/abo/cmake-host-find-root-path/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libxml2.so (found version "2.9.4")
  [...]
  0

After this patch is applied:

  make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
  [...]
  >>> host-mariadb 10.1.25 Configuring
  (mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" PKG_CONFIG="/opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_LIBDIR="/opt/br/abo/cmake-host-find-root-path/host/lib/pkgconfig:/opt/br/abo/cmake-host-find-root-path/host/share/pkgconfig" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1  /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-roo
 t-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++"  -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1=""  -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF  -DWITH_SSL=bundled )
  -- Running cmake version 3.8.2
  [...]
  -- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
  [...]
  -- Found LibXml2: /usr/lib/libxml2.so (found version "2.9.4")
  [...]
  0

[1] http://lists.busybox.net/pipermail/buildroot/2017-August/199776.html

Reported-by: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

faad2: security bump to version 2.8.1

Fixes: CVE-2017-9218, CVE-2017-9219, CVE-2017-9220, CVE-2017-9221,
CVE-2017-9222, CVE-2017-9223, CVE-2017-9253, CVE-2017-9254,
CVE-2017-9255, CVE-2017-9256, CVE-2017-9257

http://seclists.org/fulldisclosure/2017/Jun/32

Switch to .tar.bz2 to save some bandwidth.

Add autoreconf since unfortunately upstream tarball does not ship the
configure script.

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

nvme: remove the udev optional dependency

Upstream removed the udev dependent code in commit 4cbe5888f4bc (nvme-cli:
fabrics: remove libudev dependency).

Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

nvme: fix libuuid test when cross compiling

Use $(LD) to test whether libuuid is installed, so that we check the target,
not the host.

Fixes:
http://autobuild.buildroot.net/results/e26/e263ffbf8947374c2aac73ab42edcbf4d9a3600a/
http://autobuild.buildroot.net/results/53b/53b2d1e0c3cdeafb980389bcfd8a10b6ca48fbc2/

Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/snappy: remove pthread handling for static builds

Commit 0e2ee0e6e8076 (package.snappy: fix static builds with threads)
added LIBS=-pthread to configure options to fix static build with
threads on some architectures. This works for autotools packages. Then,
commit d26282b3aa14cb (package/snappy: bump version, switch to cmake)
switched to cmake that does not understand the 'LIBS' parameter.

As pointed out by Thomas[1] the special handling of libpthread for
static builds is not needed anymore: it was needed only to build the
tests, and these are no longer built. Note that packages that link
statically with snappy will still need to link with -pthread. Only
two in-tree packages currently depend on snappy: lua-csnappy depends
on !BR2_STATIC_LIBS and leveldb adds -pthread from its build system.

Tested with the following musl & uclibc defconfigs which also fix build
errors:
http://autobuild.buildroot.net/results/39f/39f9fc4300ddca19e8a533765b46838003752000/
http://autobuild.buildroot.net/results/886/8860b9259f7a3aecb2ddbfa787be048072bd347b/

[1] http://lists.busybox.net/pipermail/buildroot/2017-July/199549.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Baruch: improved commit message]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: improved commit message more, based on Yann's input]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

bind: fix configure in case lmdb devel files are present on the host

Fix configure failure in case lmdb devel files are present on the host
by adding --without-lmdb option (reported [1] and fix tested [2],[3] by
grunpferd@netscape.net).

Fixes:

  checking for lmdb library... yes
  checking for library containing mdb_env_create... no
  configure: error: found lmdb include but not library.

[1] http://lists.busybox.net/pipermail/buildroot/2017-August/199945.html
[2] http://lists.busybox.net/pipermail/buildroot/2017-August/199963.html
[3] http://lists.busybox.net/pipermail/buildroot/2017-August/199964.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/jack2: backport two build fixes

0005-gcc7.patch fixes
http://autobuild.buildroot.net/results/c06/c0610325d7785dfa51c5d36775623ca8fa517f24/

0006-fix-ftbfs-with-clang.patch
fixes the subsequent build error:
common/memops.c.31.o: In function `sample_move_dither_rect_d16_sSs':
memops.c:(.text+0x4dc): undefined reference to `fast_rand'

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

glibc: add patch to fix build on x86

This fixes the following build issues:

In file included from ../sysdeps/x86_64/multiarch/varshift.c:19:0,
                 from ../sysdeps/i386/i686/multiarch/varshift.c:1:
../sysdeps/x86_64/multiarch/varshift.h: In function '__m128i_shift_right':
../sysdeps/x86_64/multiarch/varshift.h:26:1: error: SSE vector return without SSE enabled changes the ABI [-Werror=psabi]
 {

[...]

.../lib/gcc/i686-buildroot-linux-gnu/7.1.0/include/tmmintrin.h:136:1: error: inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch

The patch has been taken from glibc's patchwork at
https://patchwork.sourceware.org/patch/21003/.

Fixes bug #10156.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux-headers: aarch64: Prevent selecting unsupported versions

Versions older than Linux v3.7 do not support the aarch64 architecture
so disable them, for reference see https://kernelnewbies.org/Linux_3.7

Without this patch these defconfigs fail to build

BR2_aarch64=y
BR2_KERNEL_HEADERS_3_2=y

BR2_aarch64=y
BR2_KERNEL_HEADERS_3_4=y

with error messages like this:

make[1]: Entering directory '/home/buildroot/br5_next/output/build/linux-headers-3.2.89'
Makefile:567: /home/buildroot/br5_next/output/build/linux-headers-3.2.89/arch/arm64/Makefile: No such file or directory

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux: bump default to version 4.12.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux-headers: bump 4.{4, 9, 12}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux-headers: bump 4.1.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qemu-sparc64: update kernel

This fixes '__multi3' issue when building the kernel.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qemu-sparc: update kernel

Fixes gcc 7.1.0 compile issues.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

uclibc: fix microblaze runtime error

With binutils 2.29 a runtime error is seen:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100

Backport upstream patch to fix the issue.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux: drop full stop from prompt text

We don't add a full stop at the end of the prompt text.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

mutt: fix build with BR2_PACKAGE_SKELETON_NONE

BR2_PACKAGE_SKELETON_NONE does not provide the /var subdirectory which
breaks symlink creation in that directory. Make sure that /var exists
before creating the symlink.

Fixes:
http://autobuild.buildroot.net/results/32d/32dff0df759baf1120e4f11335e735eb0708b237/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qt5base: fix examples compile without opengl support

Fixes [1]:

  make[1]: Entering directory '.../build/qt5base-5.9.1/examples/opengl'
  cd hellowindow/ && ( test -e Makefile || .../build/qt5base-5.9.1/bin/qmake -o Makefile .../build/qt5base-5.9.1/examples/opengl/hellowindow/hellowindow.pro ) && make -f Makefile
  make[2]: Entering directory '.../build/qt5base-5.9.1/examples/opengl/hellowindow'
  .../host/bin/sparc-linux-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=.../host/sparc-buildroot-linux-uclibc/sysroot -O2 -O3 -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I../../../include/QtGui/5.9.1 -I../../../include/QtGui/5.9.1/QtGui -I../../../include -I../../../include/QtGui -I../../../include/QtCore/5.9.1 -I../../../include/QtCore/5.9.1/QtCore -I../../../include/QtCore -I.moc -I../../../mkspecs/devices/linux-buildroot-g++ -o .obj/hellowindow.o hellowindow.cpp
  In file included from hellowindow.cpp:51:0:
  hellowindow.h:96:5: error: ‘QOpenGLShaderProgram’ does not name a type
       QOpenGLShaderProgram *m_program;
       ^~~~~~~~~~~~~~~~~~~~
  hellowindow.h:97:5: error: ‘QOpenGLBuffer’ does not name a type
       QOpenGLBuffer m_vbo;
       ^~~~~~~~~~~~~
  hellowindow.cpp: In constructor ‘Renderer::Renderer(const QSurfaceFormat&, Renderer*, QScreen*)’:
  hellowindow.cpp:62:40: error: invalid use of incomplete type ‘class QOpenGLContext’
       m_context = new QOpenGLContext(this);
                                          ^
  In file included from ../../../include/QtGui/qsurfaceformat.h:1:0,
                   from ../../../include/QtGui/../../src/gui/kernel/qsurface.h:45,
                   from ../../../include/QtGui/qsurface.h:1,
                   from ../../../include/QtGui/../../src/gui/kernel/qwindow.h:51,
                   from ../../../include/QtGui/qwindow.h:1,
                   from ../../../include/QtGui/QWindow:1,
                   from hellowindow.h:51,
                   from hellowindow.cpp:51:

[1] http://autobuild.buildroot.net/results/001/001bc930014fca8c2a8b7a390350b4e1a15fa375/build-end.log

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux: bump cip version to v4.4.75-cip6

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

DEVELOPERS: add Joshua Henderson for qt5wayland

Add myself and include the qt5/qt5wayland package.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

netatalk: bump to version 3.1.9

This version is compatible with LibreSSL.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

glibc: add patch fixing the build with binutils 2.29

Fixes the following build failure, which occurs on all architectures:

/tmp/cc6APNmN.s: Assembler messages:
/tmp/cc6APNmN.s: Error: `loc1@GLIBC_2.17' can't be versioned to common symbol 'loc1'
/tmp/cc6APNmN.s: Error: `loc2@GLIBC_2.17' can't be versioned to common symbol 'loc2'
/tmp/cc6APNmN.s: Error: `locs@GLIBC_2.17' can't be versioned to common symbol 'locs'
../o-iterator.mk:9: recipe for target '/tmp/output/build/glibc-2.25/build/misc/regexp.os' failed

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

gdb: drop support for Microblaze

Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.

Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).

Currently, gdb on Microblaze fails to build in various conditions:

 * Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"

 * Against musl, with "error: unknown type name 'elf_gregset_t'"

While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.

Therefore, let's drop support for gdb on Microblaze entirely.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

dbus: add upstream patch to fix startup hang with with expat >= 2.2.1

After c0ad6ded018ffbc33f7f5 expat: security bump to version 2.2.1
the system can hang on startup under certain circumstances.

This happens when:
  * we use systemd as init system
  * the random nonblocking pool takes a while to initialize
    * this apparently doesn't happen on qemu, so this would not have
      been caught by the runtime testing infrastructure
    * it also doesn't seem to happen when network booting

For a more detailed description of the bug see here:
https://bugs.freedesktop.org/show_bug.cgi?id=101858

The patch should be in next dbus version 1.10.24

Set DBUS_AUTORECONF = YES because configure.ac is changed.

Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
[Arnout: add upstream commit sha + Marcus's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/skeleton-common: fix recursive variable

This fixes a recursive variable definition introduced by the refactoring
in commit 120307520f69f801bf05df1d2fd3433c6d498551. Simply rename the
hook to remove the recursion.

Fixes https://bugs.busybox.net/show_bug.cgi?id=10146

Signed-off-by: Stefan Becker <chemobejk@gmail.com>