gcc-changelog: Add libstdc++-v3/testsuite to wildcard prefixes

This allows using "testsuite/*" in libstdc++-v3/ChangeLog entries, which
was one of the original motivations for adding wildcard support in the
first place:
https://gcc.gnu.org/pipermail/gcc/2020-June/232719.html

contrib/ChangeLog:

* gcc-changelog/git_commit.py (wildcard_prefixes): Add libstdc++
testsuite directory.

rtl_dump_bb: fix segfault when reporting internal error

During ICE reporting, sometimes rtl_dump_bb is called on partially
initialized basic blocks.  This produces another ICE, obscuring the
original problem.

Fix by checking that that basic blocks are initialized before touching
their bb_infos.

gcc/ChangeLog:

2020-11-25  Ilya Leoshkevich  <iii@linux.ibm.com>

* cfgrtl.c (rtl_bb_info_initialized_p): New function.
(rtl_dump_bb): Use rtl_bb_info_initialized_p before accessing bb
insns.

d: Add freebsd support for D compiler and runtime

gcc/ChangeLog:

PR d/87818
* config.gcc (*-*-freebsd*): Add freebsd-d.o and t-freebsd.
* config/freebsd-d.c: New file.
* config/t-freebsd: New file.

libphobos/ChangeLog:

PR d/87818
* configure.tgt: Add x86_64-*-freebsd* and i?86-*-freebsd* as
supported targets.

[Obvious] arm: Fix test from failing on some targets [PR91816]

This recently submitted test was found to fail on some Cortex-M
targets. This was because codegen on these CPUs would emit a ldr
instead of a movw/movt pair, resulting in an overall smaller test
(i.e. the branch wasn't as far) and the behaviour being tested
for not being triggered.

This commit doubles the size of the test to account for this.

gcc/testsuite/ChangeLog:

* gcc.target/arm/pr91816.c: New test.

expansion: Improve double-word modulo by certain constant divisors [PR97459]

As discussed in the PR, e.g. on x86_64 (both -m32 and -m64) there is no
double-word modulo and so we expand it to a __{,u}mod[dt]i3 call.
For certain constant divisors we can do better.  E.g. consider
32-bit word-size, 0x100000000ULL % 3 == 1, so we can use partly the Hacker's
delight modulo by summing digits approach and optimize
unsigned long long foo (unsigned long long x) { return x % 3; }
as
unsigned long long foo (unsigned long long x) {
  unsigned int sum, carry;
  carry = __builtin_add_overflow ((unsigned int) x, (unsigned int) (x >> 32), &sum);
  sum += carry;
  return sum % 3;
}
Similarly, 0x10000000ULL % 5 == 1 (note, 1 << 28), so
unsigned long long bar (unsigned long long x) { return x % 5; }
as
unsigned long long bar (unsigned long long x) {
  unsigned int sum = x & ((1 << 28) - 1);
  sum += (x >> 28) & ((1 << 28) - 1);
  sum += (x >> 56);
  return sum % 5;
}
etc.
And we can do also signed modulo,
long long baz (long long x) { return x % 5; }
as
long long baz (long long x) {
  unsigned int sum = x & ((1 << 28) - 1);
  sum += ((unsigned long long) x >> 28) & ((1 << 28) - 1);
  sum += ((unsigned long long) x >> 56);
  /* Sum adjustment for negative x.  */
  sum += (x >> 63) & 3;
  unsigned int rem = sum % 5;
  /* And finally adjust it to the right interval for negative values.  */
  return (int) (rem + ((x >> 63) & -4));
}

2020-11-30  Jakub Jelinek  <jakub@redhat.com>

PR rtl-optimization/97459
* internal-fn.h (expand_addsub_overflow): Declare.
* internal-fn.c (expand_addsub_overflow): No longer static.
* optabs.c (expand_doubleword_mod): New function.
(expand_binop): Optimize double-word mod with constant divisor.

* gcc.dg/pr97459-1.c: New test.
* gcc.dg/pr97459-2.c: New test.

changelog: Allow wildcard pattern only.

contrib/ChangeLog:

* gcc-changelog/git_commit.py: Allow wildcard pattern only.

RISC-V: Always define MULTILIB_DEFAULTS

 - Define MULTILIB_DEFAULTS can reduce the total number of multilib if
   the default arch and ABI are listed in the multilib config.

 - This also simplify the implementation of --with-multilib-list.

gcc/ChangeLog:

* config.gcc (riscv*-*-*): Add TARGET_RISCV_DEFAULT_ABI and
TARGET_RISCV_DEFAULT_ARCH to tm_defines.
Remove including riscv/withmultilib.h for --with-multilib-list.
* config/riscv/riscv.h (STRINGIZING): New.
(__STRINGIZING): Ditto.
(MULTILIB_DEFAULTS): Ditto.
* config/riscv/withmultilib.h: Remove.

Fix print_multilib_info when default arguments appear in the option list with '!'

This issue is found when we try to always define MULTILIB_DEFAULTS for -march
and -mabi for RISC-V back-end, however `-print-multi-lib` will skip
multi-lib setting if match any one of flag in MULTILIB_DEFAULTS, even
some options are specified in the option list with '!'.

e.g.

We have default march=rv32i and mabi=ilp32.

And we have following multi-lib set:

". !march=rv32i !march=rv32im !march=rv32imafc !mabi=ilp32 !mabi=ilp32f;"
"rv32i/ilp32 march=rv32i !march=rv32im !march=rv32imafc mabi=ilp32 !mabi=ilp32f;"
"rv32im/ilp32 !march=rv32i march=rv32im !march=rv32imafc mabi=ilp32 !mabi=ilp32f;"
"rv32imafc/ilp32f !march=rv32i !march=rv32ic !march=rv32im march=rv32imafc !mabi=ilp32 mabi=ilp32f;"

`-print-multi-lib` willl show `.` and `rv32imafc/ilp32f` only, because
the mabi=ilp32 is matched, however there is `!march=rv32i` in `rv32im/ilp32`, so
`rv32im/ilp32` should keep, because it reject march=rv32i.

Note: This can be reproduced via following configure options with patch [1]:
gcc/configure --target=riscv64-elf --with-arch=rv32i --with-abi=ilp32 \
  --with-multilib-generator="rv32i-ilp32--;rv32im-ilp32--;rv32imafc-ilp32f--"

[1] https://gcc.gnu.org/pipermail/gcc-patches/2020-November/559707.html

gcc/ChangeLog:

* gcc.c (print_multilib_info): Check default arguments not
appeared in multi-lib option list with '!'

fixed _bswapsi2 function

libgcc

* libgcc2.c (bswapsi2): Make constants unsigned.

Fix minor bug in ft32 widening multiply

gcc/
* config/ft32/ft32.md (umulsidi3): Do not allow constants as
arguments.

Daily bump.

PR fortran/98017 - Suspected regression using PACK

When substituting a parameter variable of type character, the character
length was reset to 1.  Fix this by copying the length.

gcc/fortran/ChangeLog:

* expr.c (simplify_parameter_variable): Fix up character length
after copying an array-valued expression.

gcc/testsuite/ChangeLog:

* gfortran.dg/pr98017.f90: New test.

Fix handling of ignore_stores in ipa_merge_modref_summary_after_inlining

* ipa-modref.c (ipa_merge_modref_summary_after_inlining): Fix
handling of ignore_stores.

Fix freeing of thunk-info

PR jit/97867
* symtab-thunks.h (thunk_info::release): Use ggc_delete.

Handle PHIs in compute_objsize.

PR middle-end/92936 - missing warning on a past-the-end store to a PHI
PR middle-end/92940 - incorrect offset and size in -Wstringop-overflow for out-of-bounds store into VLA and two offset ranges
PR middle-end/89428 - missing -Wstringop-overflow on a PHI with variable offset

gcc/ChangeLog:

PR middle-end/92936
PR middle-end/92940
PR middle-end/89428
* builtins.c (access_ref::access_ref): Initialize member.
(access_ref::phi): New function.
(access_ref::get_ref): New function.
(access_ref::add_offset): Remove duplicate assignment.
(maybe_warn_for_bound): Add "maybe" kind of warning messages.
(warn_for_access): Same.
(inform_access): Rename...
(access_ref::inform_access): ...to this.  Print PHI arguments.  Format
offset the same as size and simplify.  Improve printing of allocation
functions and VLAs.
(check_access): Adjust to the above.
(gimple_parm_array_size): Change argument.
(handle_min_max_size): New function.
* builtins.h (class ssa_name_limit_t): Move class here from
tree-ssa-strlen.c.
(struct access_ref): Declare new members.
(gimple_parm_array_size): Change argument.
* tree-ssa-strlen.c (maybe_warn_overflow): Use access_ref and simplify.
(handle_builtin_memcpy): Correct argument passed to maybe_warn_overflow.
(handle_builtin_memset): Same.
(class ssa_name_limit_t): Move class to builtins.{h,c}.

gcc/testsuite/ChangeLog:

PR middle-end/92936
PR middle-end/92940
PR middle-end/89428
* c-c++-common/Wstringop-overflow-2.c: Adjust text of expected
informational notes.
* g++.dg/warn/Wstringop-overflow-3.C: Same.
* g++.dg/warn/Wplacement-new-size.C: Remove a test for a no longer
issued warning.
* gcc.dg/Warray-bounds-43.c: Removed unused declarations.
* gcc.dg/Wstringop-overflow-11.c: Remove xfails.
* gcc.dg/Wstringop-overflow-12.c: Same.
* gcc.dg/Wstringop-overflow-17.c: Adjust text of expected messages.
* gcc.dg/Wstringop-overflow-27.c: Same.  Remove xfails.
* gcc.dg/Wstringop-overflow-28.c: Adjust text of expected messages.
* gcc.dg/Wstringop-overflow-29.c: Same.
* gcc.dg/Wstringop-overflow-37.c: Same.
* gcc.dg/Wstringop-overflow-46.c: Same.
* gcc.dg/Wstringop-overflow-47.c: Same.
* gcc.dg/Wstringop-overflow-54.c: Same.
* gcc.dg/warn-strnlen-no-nul.c: Add expected warning.
* gcc.dg/Wstringop-overflow-7.c: New test.
* gcc.dg/Wstringop-overflow-58.c: New test.
* gcc.dg/Wstringop-overflow-59.c: New test.
* gcc.dg/Wstringop-overflow-60.c: New test.
* gcc.dg/Wstringop-overflow-61.c: New test.
* gcc.dg/Wstringop-overflow-62.c: New test.
* gcc.dg/Wstringop-overflow-63.c: New test.
* gcc.dg/Wstringop-overflow-64.c: New test.

d: Add darwin support for D language front-end

gcc/ChangeLog:

* config.gcc (*-*-darwin*): Set d_target_objs and target_has_targetdm.
* config/elfos.h (TARGET_D_MINFO_SECTION): New macro.
(TARGET_D_MINFO_START_NAME): New macro.
(TARGET_D_MINFO_END_NAME): New macro.
* config/t-darwin: Add darwin-d.o.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in (D language and ABI): Add @hook for
TARGET_D_MINFO_SECTION, TARGET_D_MINFO_START_NAME, and
TARGET_D_MINFO_END_NAME.
* config/darwin-d.c: New file.

gcc/d/ChangeLog:

* d-target.def (d_minfo_section): New hook.
(d_minfo_start_name): New hook.
(d_minfo_end_name): New hook.
* modules.cc: Include d-target.h.
(register_moduleinfo): Update to use new targetdm hooks.

configure: Support building D front-end on *-*-darwin*

The bootstrap has been confirmed to be succeeding, there's no need to
set it as an unsupported language.

ChangeLog:

PR d/87788
* configure.ac: Don't disable D for *-*-darwin*.
* configure: Regenerate.

Fix hppa64-hpux11 build to remove source paths from embedded path.

This change adds the +nodefaultrpath ld option to remove all library
paths that were specified with the -L option from the embedded path.

2020-11-29  John David Anglin  <danglin@gcc.gnu.org>

ChangeLog:
* libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on
hppa64-*-hpux11*.

libatomic/ChangeLog:
* configure: Regenerate.

libbacktrace/ChangeLog:
* configure: Regenerate.

libcc1/ChangeLog:
* configure: Regenerate.

libffi/ChangeLog:
* configure: Regenerate.

libgfortran/ChangeLog:
* configure: Regenerate.

libgomp/ChangeLog:
* configure: Regenerate.

libhsail-rt/ChangeLog:
* configure: Regenerate.

libitm/ChangeLog:
* configure: Regenerate.

libobjc/ChangeLog:
* configure: Regenerate.

liboffloadmic/ChangeLog:
* configure: Regenerate.
* plugin/configure: Regenerate.

libquadmath/ChangeLog:
* configure: Regenerate.

libsanitizer/ChangeLog:
* configure: Regenerate.

libssp/ChangeLog:
* configure: Regenerate.

libstdc++-v3/ChangeLog:
* configure: Regenerate.

libvtv/ChangeLog:
* configure: Regenerate.

lto-plugin/ChangeLog:
* configure: Regenerate.

zlib/ChangeLog:
* configure: Regenerate.

Fix PR ada/97504 on hppa*-*-hpux*.

2020-11-29  John David Anglin  <danglin@gcc.gnu.org>

gcc/ada/
PR ada/97504
* Makefile.rtl (LIBGNAT_TARGET_PAIRS) <hppa*-*-hpux*>: Use wraplf
version of Aux_Long_Long_Float.

Skip EAF_UNUSED parameters in handle_pure_call

* tree-ssa-structalias.c (handle_pure_call): Skip EAF_UNUSED
 parameters.

Detect unused parameters in ipa-modref

* ipa-modref.c (modref_lattice::merge): Do nothing if F is EAF_UNUSED.
(analyze_parms): Detect unused params.
(modref_merge_call_site_flags): Merge correct EAF_UNUSED.

d: Remove d_size_t from front-end sources (PR 87788)

The typedef for d_size_t assumes that the implementation of the
front-end is written in D itself, where size_t can map only to uint32_t
or uint64_t.  As that is not the case for the current D front-end, the
typedef should be removed. This would fix the bootstrap on targets where
in C++ size_t is a long, such as darwin i386.

Reviewed-on: https://github.com/dlang/dmd/pull/12008

gcc/d/ChangeLog:

PR d/87788
* dmd/MERGE: Merge upsream dmd 45fa6cfd2.

Daily bump.

Improve support of simple bit-fields in -fdump-ada-spec

This fixes an issue with nested structures and adds an Alignment clause
to counter the effect of the Pack aspect.

gcc/c-family/ChangeLog:
* c-ada-spec.c (dump_nested_type) <RECORD_TYPE>: Remove obsolete code.
(dump_ada_structure): Also deal with convention, unchecked union and
bit-field for nested types.  In the latter case, print an Alignment
aspect along with the Pack aspect.

compiler: avoid follow-on errors for bad types

Mark bad types as erroneous, to avoid generating further errors.

This required some code using array types to check for errors.

For https://golang.org/issue/19880

Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/273626

compiler: better error for x, x := 1, 2

Was
    assign.go:59:28: error: multiple assignments to x
Now
    assign.go:59:28: error: ‘x’ repeated on left side of :=

Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/273546

Fix PR target/97939

The little dance around 4096 that add/sub instructions do on the SPARC
needs to be taken into account for the overflow arithmetic operations.
It cannot be done for unsigned overflow, but it can be done for signed
overflow.

gcc/ChangeLog:
PR target/97939
* config/sparc/predicates.md (arith_double_add_operand): Comment.
* config/sparc/sparc.md (uaddvdi4): Use arith_double_operand.
(addvdi4): Use arith_double_add_operand.
(addsi3): Remove useless attributes.
(addvsi4): Use arith_add_operand.
(*cmp_ccv_plus): Likewise and add second alternative accordingly.
(*cmp_ccxv_plus): Likewise.
(*cmp_ccv_plus_set): Likewise.
(*cmp_ccxv_plus_set): Likewise.
(*cmp_ccv_plus_sltu_set): Likewise.
(usubvdi4): Use arith_double_operand.
(subvdi4): Use arith_double_add_operand.
(subsi3): Remove useless attributes.
(subvsi4): Use arith_add_operand.
(*cmp_ccv_minus): Likewise and add second alternative accordingly.
(*cmp_ccxv_minus): Likewise.
(*cmp_ccv_minus_set): Likewise.
(*cmp_ccxv_minus_set): Likewise.
(*cmp_ccv_minus_sltu_set): Likewise.
(negsi2): Use register_operand.
(unegvsi3): Likewise.
(negvsi3) Likewise.
(*cmp_ccnz_neg): Likewise.
(*cmp_ccxnz_neg): Likewise.
(*cmp_ccnz_neg_set): Likewise.
(*cmp_ccxnz_neg_set): Likewise.
(*cmp_ccc_neg_set): Likewise.
(*cmp_ccxc_neg_set): Likewise.
(*cmp_ccc_neg_sltu_set): Likewise.
(*cmp_ccv_neg): Likewise.
(*cmp_ccxv_neg): Likewise.
(*cmp_ccv_neg_set): Likewise.
(*cmp_ccxv_neg_set): Likewise.
(*cmp_ccv_neg_sltu_set): Likewise.

gcc/testsuite/ChangeLog:
* gcc.target/sparc/overflow-6.c: New test.

Generate correct fn specs for some Fortran library functions.

This patch works by generating the correct fn spec from the
actual arguments in specific_intrinsic_symbol, and by passing this
down via gfc_get_extern_function_decl to gfc_get_function_type.
CSHIFT remains to be done.

gcc/fortran/ChangeLog:

PR fortran/97454
* trans-decl.c (gfc_get_extern_function_decl): Add argument
fnspec.
* trans-intrinsic.c (MAX_SPEC_ARG): Define.
(intrinsic_fnspec): New function.
(ADD_CHAR): Define.
(specific_intrinsic_symbol): Adjust comment. Pass
fn spec to gfc_get_extern_function_decl.
(gfc_conv_intrinsic_funcall): Add ANY, ALL, NORM2, PRODUCT
and SUM intrnisic. Add FIXME for cshift et al.
* trans-types.c (gfc_get_function_type): Add fnspec argument,
handle it.
* trans-types.h (gfc_get_function_type): Add optinal fnspec
argument.
* trans.h (gfc_get_extern_function_decl): Likewise.

Daily bump.

Revert previous change and use pragma to suppress -Wformat-diag.

gcc/cp/ChangeLog:

* error.c (add_quotes): Revert previous change and use pragma to
suppress -Wformat-diag.

preprocessor: Fix #line overflow check [PR97602]

The preprocessor check for overflow (of linenum_type = unsigned int)
when reading the line number in a #line directive is incomplete; it
checks "reg < reg_prev" which doesn't cover all cases where
multiplying by 10 overflowed.  Fix this by checking for overflow
before rather than after it occurs (using essentially the same logic
as used by e.g. glibc printf when reading width and precision values
from strings).

Bootstrapped with no regressions for x86_64-pc-linux-gnu.

libcpp/
2020-11-27  Joseph Myers  <joseph@codesourcery.com>

PR preprocessor/97602
* directives.c (strtolinenum): Check for overflow before it
occurs.  Correct comment.

gcc/testsuite/
2020-11-27  Joseph Myers  <joseph@codesourcery.com>

PR preprocessor/97602
* gcc.dg/cpp/line9.c, gcc.dg/cpp/line10.c: New tests.

libphobos: Fix segfault at run-time when using custom Fibers (PR 98025)

When libphobos is configured with --enable-cet, this adds extra fields
to the Fiber class to support the ucontext_t fallback implementation.
These fields get omitted when compiling user code unless they also used
`-fversion=CET' to build their project, which resulted in data being
overwritten from within swapcontext().

On reviewing the ucontext_t definitions, it was found that the shadow
stack fields were missing, and the struct size didn't match up on X32.
This has been fixed in upstream druntime and merged down here.

Reviewed-on: https://github.com/dlang/druntime/pull/3293

libphobos/ChangeLog:

PR d/98025
* Makefile.in: Regenerate.
* configure: Regenerate.
* configure.ac (DCFG_ENABLE_CET): Substitute.
* libdruntime/MERGE: Merge upstream druntime 0fe7974c.
* libdruntime/Makefile.in: Regenerate.
* libdruntime/core/thread.d: Import gcc.config.
(class Fiber): Add ucontext_t fields when GNU_Enable_CET is true.
* libdruntime/gcc/config.d.in (GNU_Enable_CET): Define.
* src/Makefile.in: Regenerate.
* testsuite/Makefile.in: Regenerate.

d: Merge upstream dmd db0df3f7e.

Removes all support code and tests for the extern(Pascal) calling
convention.

Reviewed-on: https://github.com/dlang/dmd/pull/11994

gcc/d/ChangeLog:

* dmd/MERGE: Merge upstream dmd db0df3f7e.
* types.cc (TypeVisitor::visit (TypeFunction *)): Remove LINKpascal.

libphobos: Merge upstream druntime d37ef985.

Adds support for FreeBSD/x86 53-bit precision reals, updates bindings
for FreeBSD 12.x, and removes all support code and tests for the
extern(Pascal) calling convention.

Reviewed-on: https://github.com/dlang/druntime/pull/3286
     https://github.com/dlang/druntime/pull/3287

libphobos/ChangeLog:

* libdruntime/MERGE: Merge upstream druntime d37ef985.
* libdruntime/Makefile.am (DRUNTIME_DSOURCES_FREEBSD): Add
core/sys/freebsd/config.d
* libdruntime/Makefile.in: Regenerate.

libphobos: Merge upstream phobos 38873fe6e.

Adds support for FreeBSD/x86 53-bit precision reals, and removes all
support code and tests for the extern(Pascal) calling convention.

Reviewed-on: https://github.com/dlang/phobos/pull/7704
     https://github.com/dlang/phobos/pull/7705

libphobos/ChangeLog:

* src/MERGE: Merge upstream phobos 38873fe6e.

d: Add float and double overloads for all core.math intrinsics

For the math intrinsics: cos, fabs, ldexp, rint, rndtol, and sin, new
overloads have been added to the core.math module for matching float and
double types.  These have been implemented in the compiler.

A recent change to dump_function_to_file started triggering some
scan-tree-dump tests to FAIL, these have been adjusted as well when
updating the test.

gcc/d/ChangeLog:

* intrinsics.cc (maybe_expand_intrinsic): Handle new intrinsics.
* intrinsics.def (INTRINSIC_COS): Add float and double overloads.
(INTRINSIC_FABS): Likewise.
(INTRINSIC_LDEXP): Likewise.
(INTRINSIC_RINT): Likewise.
(INTRINSIC_RNDTOL): Likewise.
(INTRINSIC_SIN): Likewise.
(INTRINSIC_TOPREC): Adjust signature.

libphobos/ChangeLog:

* libdruntime/MERGE: Merge upstream druntime 5e4492c4.

gcc/testsuite/ChangeLog:

* gdc.dg/intrinsics.d: Adjust patterns in scan-tree-dump.

testsuite/i386: Fix XOP and FMA4 checking functions [PR98036].

Add missing returns and remove unnecessary postfix increments.

2020-11-27  Uroš Bizjak  <ubizjak@gmail.com>

PR testsuite/98036

gcc/testsuite/
* gcc.target/i386/fma4-256-maccXX.c (check_maccps):
Remove unnecessary postfix increment on a returned variable.
(check_maccpd): Ditto.
* gcc.target/i386/fma4-256-msubXX.c (check_msubps): Ditto.
(check_msubpd): Ditto.
* gcc.target/i386/fma4-256-nmaccXX.c (check_nmaccps): Ditto.
(check_nmaccpd): Ditto.
* gcc.target/i386/fma4-256-nmsubXX.c (check_nmsubps): Ditto.
(check_nmsubpd): Ditto.
* gcc.target/i386/fma4-maccXX.c (check_maccps): Ditto.
(check_maccpd): Ditto.
(check_maccss): Ditto.
(check_maccsd): Ditto.
* gcc.target/i386/fma4-msubXX.c (check_msubps): Ditto.
(check_msubpd): Ditto.
(check_msubss): Ditto.
(check_msubsd): Ditto.
* gcc.target/i386/fma4-nmaccXX.c (check_nmaccps): Ditto.
(check_nmaccpd): Ditto.
(check_nmaccss): Ditto.
(check_nmaccsd): Ditto.
* gcc.target/i386/fma4-nmsubXX.c (check_nmsubps): Ditto.
(check_nmsubpd): Ditto.
(check_nmsubss): Ditto.
(check_nmsubsd): Ditto.
* gcc.target/i386/xop-haddX.c (check_sbyte2word): Add missing return.
(check_sbyte2dword):
Remove unnecessary postfix increment on a returned value.
(check_sbyte2qword): Ditto.
(check_sword2dword): Add missing return.
(check_sword2qword):
Remove unnecessary postfix increment on a returned value.
(check_dword2qword): Add missing return.
* gcc.target/i386/xop-hadduX.c (check_byte2word): Add missing return.
(check_byte2dword):
Remove unnecessary postfix increment on a returned value.
(check_byte2qword): Ditto.
(check_word2dword): Add missing return.
(check_word2qword):
Remove unnecessary postfix increment on a returned value.
(check_word2qword): Add missing return.
* gcc.target/i386/xop-hsubX.c (check_sbyte2word): Add missing return.
(check_sword2dword): Ditto.
(check_sword2qword): Ditto.

libstdc++: Refactor dejagnu effective-target checks

This introduces two new procs to replace boilerplate in the
effective-target checks.

libstdc++-v3/ChangeLog:

* testsuite/lib/libstdc++.exp (v3_try_preprocess): Define
new proc to preprocess a chunk of code.
(v3_check_preprocessor_condition): Define new proc to test
a preprocessor condition depending on GCC or libstdc++ macros.
(check_v3_target_debug_mode, check_v3_target_normal_mode):
Use v3_try_preprocess.
(check_v3_target_normal_namespace)
(check_v3_target_parallel_mode, check_v3_target_cstdint)
(check_v3_target_cmath, check_v3_target_atomic_builtins)
(check_v3_target_gthreads, check_v3_target_gthreads_timed)
(check_v3_target_sleep, check_v3_target_sched_yield)
(check_v3_target_string_conversions, check_v3_target_swprintf)
(check_v3_target_binary_io, check_v3_target_nprocs): Use
v3_check_preprocessor_condition.
(check_effective_target_cxx11): Likewise.
(check_effective_target_random_device): Likewise.
(check_effective_target_tbb-backend): Likewise.
(check_effective_target_futex): Likewise.
(check_v3_target_little_endian) Call check_effective_target_le.
(check_effective_target_atomic-builtins): New proc to define
new effective-target keyword.
(check_effective_target_gthreads-timed): Likewise.

INSTALL: Default to --enable-cet=auto

PR other/98027
* doc/install.texi: Default to --enable-cet=auto.

In 'gcc/omp-oacc-kernels-decompose.cc:flatten_binds', don't choke on empty GIMPLE sequence

Also, instead of just examining the first statement of inner 'GIMPLE_BIND' (via
'inner_sequence' being a 'typedef gimple *gimple_seq'), in fact examine all
statements contained therein, which I suppose must've been the intention here.

This "fixes" the testcase 'c-c++-common/goacc/kernels-decompose-ice-2.c' (which
now runs into the same ICE as 'c-c++-common/goacc/kernels-decompose-ice-1.c',
etc.).

gcc/
* omp-oacc-kernels-decompose.cc (flatten_binds): Don't choke on
empty GIMPLE sequence, and examine all statements contained in
inner 'GIMPLE_BIND'.
gcc/testsuite/
* c-c++-common/goacc/kernels-decompose-ice-1.c: Adjust.
* c-c++-common/goacc/kernels-decompose-ice-2.c: Likewise.

libstdc++: Fix -Wrange-loop-construct warnings in filesystem tests

Many tests do `for (const path& p : test_paths)` where test_paths is an
array of strings. To avoid -Wrange-loop-construct warnings the loop
variable should be an object, not a reference bound to a temporary.

libstdc++-v3/ChangeLog:

* testsuite/27_io/filesystem/operations/absolute.cc: Avoid
-Wrange-loop-construct warning.
* testsuite/27_io/filesystem/path/append/source.cc: Likewise.
* testsuite/27_io/filesystem/path/assign/copy.cc: Likewise.
* testsuite/27_io/filesystem/path/compare/path.cc: Likewise.
* testsuite/27_io/filesystem/path/construct/copy.cc: Likewise.
* testsuite/27_io/filesystem/path/decompose/extension.cc:
Likewise.
* testsuite/27_io/filesystem/path/decompose/filename.cc:
Likewise.
* testsuite/27_io/filesystem/path/decompose/parent_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/decompose/relative_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/decompose/root_directory.cc:
Likewise.
* testsuite/27_io/filesystem/path/decompose/root_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/itr/traversal.cc: Likewise.
* testsuite/27_io/filesystem/path/modifiers/remove_filename.cc:
Likewise.
* testsuite/27_io/filesystem/path/modifiers/replace_extension.cc:
Likewise.
* testsuite/27_io/filesystem/path/modifiers/replace_filename.cc:
Likewise.
* testsuite/27_io/filesystem/path/nonmember/append.cc: Likewise.
* testsuite/27_io/filesystem/path/nonmember/cmp.cc: Likewise.
* testsuite/27_io/filesystem/path/nonmember/cmp_c++20.cc:
Likewise.
* testsuite/27_io/filesystem/path/nonmember/hash_value.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_extension.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_filename.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_parent_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_relative_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_root_directory.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_root_name.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_root_path.cc:
Likewise.
* testsuite/27_io/filesystem/path/query/has_stem.cc: Likewise.
* testsuite/27_io/filesystem/path/query/is_relative.cc: Likewise.
* testsuite/experimental/filesystem/operations/absolute.cc:
Likewise.
* testsuite/experimental/filesystem/path/assign/copy.cc: Likewise.
* testsuite/experimental/filesystem/path/compare/path.cc:
Likewise.
* testsuite/experimental/filesystem/path/construct/copy.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/extension.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/filename.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/parent_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/relative_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/root_directory.cc:
Likewise.
* testsuite/experimental/filesystem/path/decompose/root_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/itr/traversal.cc:
Likewise.
* testsuite/experimental/filesystem/path/modifiers/remove_filename.cc:
Likewise.
* testsuite/experimental/filesystem/path/modifiers/replace_extension.cc:
Likewise.
* testsuite/experimental/filesystem/path/modifiers/replace_filename.cc:
Likewise.
* testsuite/experimental/filesystem/path/nonmember/hash_value.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_extension.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_filename.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_parent_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_relative_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_root_directory.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_root_name.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_root_path.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/has_stem.cc:
Likewise.
* testsuite/experimental/filesystem/path/query/is_relative.cc:
Likewise.

changelog: allow flexible "cherry picked" format.

It handles the following:
(cherry picked from commit c0c7270cc4efd896fe99f8ad5409dbef089a407f (testsuite changes only))

contrib/ChangeLog:

* gcc-changelog/git_commit.py: Use regex for cherry pick prefix.
* gcc-changelog/test_email.py: Test it.
* gcc-changelog/test_patches.txt: Likewise.

libstdc++: Partially revert r11-5314

The changes in r11-5314 are broken, because it means we don't use
__gthread_once for the first few initializations, but after the program
becomes multi-threaded we will repeat the initialization, using
__gthread_once once this time. This leads to memory errors.

The use of __is_single_threaded() in locale::id::_M_id() is OK, because
the side effects are the same either way.

libstdc++-v3/ChangeLog:

* src/c++98/locale.cc (locale::facet::_S_get_c_locale()):
Revert change to use __is_single_threaded.
* src/c++98/locale_init.cc (locale::_S_initialize()):
Likewise.

tree-optimization/98024 - fix rnflow regression

The change to make PRE insertion iterate less had a typo in checking
successors RPO state.  Fixing this exposes that regular PRE insertion
when facing a value that is the same on all edges inserts an
assignment in place of a PHI node but fails to set up things so that
this insertion is not repeated (it correctly does not return
'new_stuff').  But with the new iteration scheme this causes us
to repeatedly insert such assignment and change AVAIL_OUT over to
the newly inserted expression.  The fix is to treat this as PHI
and insert into PHI_GEN, avoiding repetitive insertion.

2020-11-27  Richard Biener  <rguenther@suse.de>

PR tree-optimization/98024
* tree-ssa-pre.c (insert): Fix successor RPO order check.
(do_pre_regular_insertion): When inserting an assignment
in place of an all-same-value PHI still record that into
PHI_GEN.

gfortran.dg/gomp/requires-4.f90: Fix !$omp clause

gcc/testsuite/
* gfortran.dg/gomp/requires-4.f90: Fix typo in '!$omp' clause.

gfortran.dg/gomp/requires-4.f90: Fix !$omp syntax

gcc/testsuite/
* gfortran.dg/gomp/requires-4.f90: Fix '!$omp' syntax.

tree-ssanames: Allow non-SSA_NAME arguments to get_range_info

My recent match.pd change required quite a lot of code due to the separate
need to handle INTEGER_CSTs and SSA_NAMEs, and after all, I didn't even
handle one case there, when in x * y / y the x is INTEGER_CST and y is
SSA_NAME.
The following patch allows to simplify it, by allowing non-SSA_NAME argument
to get_range_info, for INTEGER_CSTs it will return VR_RANGE with *min == *max
equal to the constnat, and for non-INTEGER_CST/SSA_NAMEs it will just return
VR_VARYING.

This allows not to simplify just the match.pd, but some other spots too.

2020-11-27  Jakub Jelinek  <jakub@redhat.com>

* tree-ssanames.c (get_range_info): Handle INTEGER_CST by returning
VR_RANGE with both *min and *max set to the wide_int value of the
INTEGER_CST.  Return VR_VARYING for non-SSA_NAMEs.
* match.pd ((t * 2) / 2) -> t): Handle also @0 being INTEGER_CST.
Simplify by calling get_range_info on everything.
* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Simplify by calling
get_range_info on everything.
* tree-scalar-evolution.c (iv_can_overflow_p): Likewise.

gimple-fold: Fix another __builtin_clear_padding ICE

When playing with __builtin_bit_cast, I have noticed __builtin_clear_padding
ICE on the G class below.  The artificial field with D type has offset 0
and size 8 bytes, but the following artificial field with E type has offset
0 and size 0, so it triggers the asserts that we don't move current position
backwards.  Fixed by ignoring is_empty_type (TREE_TYPE (field)) fields, all
of their bits are padding which is what is added when skipping over to next
field anyway.

2020-11-27  Jakub Jelinek  <jakub@redhat.com>

PR libstdc++/88101
* gimple-fold.c (clear_padding_type): Ignore fields with is_empty_type
types.

* g++.dg/torture/builtin-clear-padding-3.C: New test.

OpenACC: Fix integer-type issue with collapse/tile [PR97880]

gcc/ChangeLog:

PR c/97880
* omp-expand.c (expand_oacc_collapse_init, expand_oacc_collapse_vars):
Use now passed diff_type.
(expand_oacc_for): Take largest type for diff_type, taking tiling
and collapsing into account.

gcc/testsuite/ChangeLog:

PR c/97880
* gcc.dg/goacc/tile-1.c: New test.

aarch64: Introduce --param=aarch64-autovec-preference to select autovec preference in backend

This is a patch that introduces the aarch64-autovec-preference that can
take values from 0 - 4, 0 being the default.
It can be used to override the autovectorisation preferences in the
backend:
0 - use default scheme
1 - only use Advanced SIMD
2 - only use SVE
3 - use Advanced SIMD and SVE, prefer Advanced SIMD in the event of a
tie (as determined by costs)
4 - use Advanced SIMD and SVE, prefer SVE in the event of a tie (as
determined by costs)

It can valuable for experimentation when comparing SVE and Advanced SIMD
autovectorisation strategies.

It achieves this adjusting the order of the interleaved SVE and Advanced
SIMD modes in aarch64_autovectorize_vector_modes.
It also adjusts aarch64_preferred_simd_mode to use the new comparison
function to pick Advanced SIMD or SVE to start with.

Bootstrapped and tested on aarch64-none-linux-gnu.

gcc/
* config/aarch64/aarch64.opt
(-param=aarch64-autovec-preference): Define.
* config/aarch64/aarch64.c (aarch64_override_options_internal):
Set aarch64_sve_compare_costs to 0 when preferring only Advanced
SIMD.
(aarch64_cmp_autovec_modes): Define.
(aarch64_preferred_simd_mode): Adjust to use the above.
(aarch64_autovectorize_vector_modes): Likewise.
* doc/invoke.texi: Document aarch64-autovec-preference param.

[Ada] Small tweaks to couple of Value routines

gcc/ada/

* libgnat/s-valuef.adb (Integer_To_Fixed): Take into account the
extra digit when scaling up the input.
* libgnat/s-valuer.adb (Scan_Decimal_Digits): Restrict previous
change to fixed-point types.
(Scan_Integral_Digits): Likewise.

[Ada] Simplify Parent_Is_Boolean with subtype memberships

gcc/ada/

* sem_res.adb (Parent_Is_Boolean): Simplify.
(Resolve_Op_Not): Reduce scope of a local variable.

[Ada] Reuse Append_New_Elmt where possible

gcc/ada/

* cstand.adb: Simplify with Append_New_Elmt.
* sem_util.adb: Likewise.

[Ada] Wrong compile time evaluation of Shift_Right

gcc/ada/

* sem_eval.adb (Fold_Shift): Fix evaluation of Shift_Right on
negative values.

[Ada] Reference before declaration on C392015

gcc/ada/

* exp_ch6.adb (Expand_Call): Properly split
Transform_Function_Array and Modify_Tree_For_C.

[Ada] Restore access type instead of mode out parameter

gcc/ada/

* sem_eval.ads (Compile_Time_Compare): Restore parameter Diff to
be of an access type.
* sem_eval.adb (Compile_Time_Compare): Adapt body and callers.
* sem_attr.adb (Eval_Attribute): Adapt callers.

[Ada] Small improvement to System.Value_R.Scan_Raw_Real

gcc/ada/

* libgnat/s-valuer.adb (Scan_Decimal_Digits): Round Extra.
(Scan_Integral_Digits): Likewise.

[Ada] Do not apply range checks inside generics in GNATprove mode

gcc/ada/

* checks.adb (Selected_Range_Checks): Adapt the condition for
applying range checks so that it is not done inside generics.

[Ada] Do not use 128-bit division for 64-bit fixed-point types

gcc/ada/

* exp_fixd.adb (Build_Double_Divide): Only use a 128-bit
division if one of the operands is larger than 64 bits.
(Build_Double_Divide_Code): Likewise.
(Build_Scaled_Divide): Likewise.
(Build_Scaled_Divide_Code): Likewise.

[Ada] To_GM_Time returning invalid value for Invalid_Time

gcc/ada/

* libgnat/s-os_lib.adb (To_GM_Time): Return valid and consistent
values for Invalid_Time.

[Ada] Implement AI12-0187 (Stable properties of abstract data types)

gcc/ada/

* snames.ads-tmpl: Define new Name_Stable_Properties Name_Id
value.
* aspects.ads, aspects.adb: Add new Aspect_Stable_Properties
enumeration literal to Aspect_Id type. Add Class_Present
parameter to Find_Aspect and related
functions (Find_Value_Of_Aspect and Has_Aspect).
* sem_util.adb (Has_Nontrivial_Precondition): Fix
previously-latent bug uncovered by adding Class_Present
parameter to Aspect.Find_Aspect. The code was wrong before, but
with the change the bug was more likely to make a user-visible
difference.
* sem_ch6.adb (Analyze_Operator_Symbol): If a string literal
like "abs" or "-" occurs in a Stable_Properties aspect
specification, then it is to be interpreted as an operator
symbol and not as a string literal.
* sem_ch13.ads: Export new Parse_Aspect_Stable_Properties
function, analogous to the existing Parse_Aspect_Aggregate
exported procedure.
* sem_ch13.adb: (Parse_Aspect_Stable_Properties): New function;
analogous to existing Parse_Aspect_Aggregate.
(Validate_Aspect_Stable_Properties): New procedure; analogous to
existing Validate_Aspect_Aggregate. Called from the same case
statement (casing on an Aspect_Id value) where
Validate_Aspect_Aggregate is called.
(Resolve_Aspect_Stable_Properties): New procedure; analogous to
existing Resolve_Aspect_Aggregate. Called from the same two case
statements (each casing on an Aspect_Id value) where
Resolve_Aspect_Aggregate is called.
(Analyze_Aspect_Specifications): Set Has_Delayed_Aspects and
Is_Delayed_Aspect attributes for Aspect_Stable_Properties aspect
specifications.
(Check_Aspect_At_End_Of_Declarations): The syntactic
"expression" for a Stable_Properties aspect specification is not
semantically an expression; it doesn't have a type. Thus, force
T to be empty in this case.
* contracts.adb (Expand_Subprogram_Contract): Add call to new
local procedure,
Expand_Subprogram_Contract.Add_Stable_Property_Contracts, which
generates Postcondition pragmas corresponding to stable property
checks.

[Ada] Default_Initial_Condition assertion policy is now RM defined

gcc/ada/

* doc/gnat_rm/implementation_defined_pragmas.rst:
(Assertion_Policy): Move "Default_Initial_Condition" from
ID_ASSERTION_KIND to RM_ASSERTION_KIND section.
* gnat_rm.texi: Regenerate.

[Ada] Sync doc and code for pragma Assertion_Policy

gcc/ada/

* doc/gnat_rm/implementation_defined_pragmas.rst
(Assertion_Policy): Add "Default_Initial_Condition",
"Initial_Condition" and "Subprogram_Variant".
* gnat_rm.texi: Regenerate.

[Ada] Assertion_Policy is not a valid assertion policy

gcc/ada/

* sem_prag.adb (Is_Valid_Assertion_Kind): Return False on
"Assertion_Policy"

[Ada] Do not compile predefined units with -gnatp in gnatmake

gcc/ada/

* make.adb (GNAT_Flag): Change to "-gnatg".
(Compile): Adjust comments accordingly.

[Ada] Restore general case for folding comparison of static strings

gcc/ada/

* exp_ch4.adb (Rewrite_Comparison): Add assertion to confirm
that evaluation folds comparisons with static operands; when
folding comparison with non-static operands, the resulting
literal is non-static.
* sem_eval.adb (Eval_Relational_Op): Refactor nested IF
statement for the special case in the THEN branch; move code for
the "general case" out of the ELSE branch.
* sem_res.adb (Resolve_Comparison_Op): Only apply a dubious
special-case for GNATprove in the GNATprove_Mode.

[Ada] Change parameter from access type to mode out

gcc/ada/

* sem_eval.ads (Compile_Time_Compare): Change parameter Diff
from access to mode out.
* sem_eval.adb (Compile_Time_Compare): Adapt body and callers.
* sem_attr.adb (Eval_Attribute): Adapt callers.

[Ada] Move down call to Narrow_Large_Operation in Expand_N_Op_Multiply

gcc/ada/

* exp_ch4.adb (Expand_N_Op_Multiply): Move down block calling
Narrow_Large_Operation if the type is Universal_Integer.

[Ada] Reimplement Ada.Numerics.Big_Numbers.Big_Reals.Float_Conversions

gcc/ada/

* libgnat/a-nbnbre.adb: Remove clauses for System.Img_Real and
add them for System.Unsigned_Types.
(Float_Conversions.To_Big_Real): Reimplement.
(Float_Conversions.From_Big_Real): Likewise.

[Ada] Optimize generation of checks for fixed-point types

gcc/ada/

* checks.ads (Determine_Range_To_Discrete): New procedure.
* checks.adb (Apply_Scalar_Range_Check): Call it to determine
a range for the expression when the target type is discrete.
And also apply the tests for discrete types to fixed-point
types when they are treated as integers.
(Apply_Type_Conversion_Checks): Apply checks to conversions
involving fixed-point types when they are treated as integers.
(Determine_Range) <N_Type_Conversion>: Factor out code into...
(Determine_Range_To_Discrete): ...this new procedure and add
support for fixed-point types when they are treated as integers.
* einfo.ads (Type_High_Bound): Remove obsolete sentence.
(Type_Low_Bound): Likewise.
* exp_ch4.adb (Discrete_Range_Check): Remove obsolete code.
(Real_Range_Check): Likewise.
(Expand_N_Type_Conversion): In case of a no-op conversion, clear
the Do_Range_Check flag on the operand before substituting it.
Remove calls to Real_Range_Check and Discrete_Range_Check that
are not guarded by the Do_Range_Check flag, and an assertion.
* sem_res.adb (Resolve_Type_Conversion): Always apply range
checks in GNATprove mode; in normal mode, use the updated type
of the operand in the test against Universal_Fixed.  Remove
obsolete code setting the Do_Range_Check flag at the end.

[Ada] Simplify check for illegal non-returning procedures

gcc/ada/

* sem_prag.adb (Analyze_Pragma): Change "Ref Manual" to RM;
replace uses of an unnecessary "Ok" variable with RETURN
statements; replace nested IF with ELSIF.

[Ada] Abort defer mismatch with SJLJ exceptions

gcc/ada/

* libgnarl/s-tasren.adb (Local_Complete_Rendezvous): Always call
Defer_Abort.
* libgnat/a-except.adb: Abort does not need to be deferred.
* libgnarl/s-tpobop.adb (Exceptional_Complete_Entry_Body): Abort
never needs to be undeferred here.
* exp_ch11.adb (Expand_Exception_Handlers): Remove difference
between ZCX and SJLJ.
* exp_ch9.adb (Expand_N_Asynchronous_Select): Remove different
handling for sjlj.
* exp_sel.ads, exp_sel.adb (Build_Abort_Block,
Build_Abort_Block_Handler): Ditto.

[Ada] Emit error messages for null/generic nonreturning procedures

gcc/ada/

* sem_prag.adb (Analyze_Pragma): declare new Check_No_Return
function and call it.

[Ada] Fix tree for expanded instantiations corresponding to formal packages

gcc/ada/

* sem_ch12.adb (Instantiate_Object): Consistently use
New_Copy_Tree instead of New_Copy.

[Ada] Adjust head comment of various subprograms in Exp_Fixd

gcc/ada/

* exp_fixd.adb (Build_Conversion): Adjust head comment.
(Build_Divide): Likewise.
(Build_Double_Divide): Likewise.
(Build_Multiply): Likewise.
(Build_Rem): Likewise.
(Build_Scaled_Divide): Likewise.

[Ada] To_Big_Integer and 128bits integers

gcc/ada/

* libgnat/s-genbig.ads, libgnat/s-genbig.adb (To_Bignum): New
variant taking an Unsigned_128.
* libgnat/a-nbnbin.adb (To_Big_Integer): Add support for 128
bits signed and unsigned types.

[Ada] Small tweaks to new implementation of Set_Image_Fixed

gcc/ada/

* libgnat/s-imagef.adb (Set_Image_Fixed): Pass the full value
of the quotient to Set_Image_Integer during the first round and
adjust the handling of the minus sign.

[Ada] Error in Big_Real comparison

gcc/ada/

* libgnat/a-nbnbre.adb ("=", "<"): Fix.

[Ada] Fix oversignt in genericized package System.Value_R

gcc/ada/

* libgnat/s-valuer.adb (Scan_Raw_Real): Move pragma Annotate around
and adjust its parameters.

[Ada] Optimize magnitude of integer operations for fixed point

gcc/ada/

* exp_fixd.adb (Build_Double_Divide): Use the RM size of types and
a more precise estimate for the size of the denominator.
(Build_Double_Divide_Code): Likewise.
(Build_Multiply): Use a more precise estimate for the size of the
result.
(Build_Scaled_Divide):  Use the RM size of types and a more precise
estimate for the size of the numerator.
(Build_Scaled_Divide_Code): Likewise.

rs6000: Change rs6000_expand_vector_set param

rs6000_expand_vector_set could accept insert either to constant position
or variable position, so change the operand to reg_or_cint_operand.

gcc/ChangeLog:

2020-11-27  Xionghu Luo  <luoxhu@linux.ibm.com>

* config/rs6000/rs6000-call.c (altivec_expand_vec_set_builtin):
Change call param 2 from type int to rtx.
* config/rs6000/rs6000-protos.h (rs6000_expand_vector_set):
Likewise.
* config/rs6000/rs6000.c (rs6000_expand_vector_init):
Change call param 2 from type int to rtx.
(rs6000_expand_vector_set): Likewise.
* config/rs6000/vector.md (vec_set<mode>): Support both constant
and variable index vec_set.

This patch adds absolute jump table support for rs6000.

gcc/ChangeLog:

* config/rs6000/rs6000-protos.h (rs6000_output_addr_vec_elt): Declare.
* config/rs6000/rs6000.c (TARGET_ASM_GENERATE_PIC_ADDR_DIFF_VEC):
Define.
(rs6000_gen_pic_addr_diff_vec, rs6000_output_addr_vec_elt): Implement.
* config/rs6000/rs6000.h (CASE_VECTOR_PC_RELATIVE,
CASE_VECTOR_MODE, ASM_OUTPUT_ADDR_VEC_ELT): Define.
* config/rs6000/rs6000.md (tablejump<mode>_absolute,
tablejump<mode>_absolute_nospec): New expanders.
* config/rs6000/rs6000.opt (mrelative-jumptables): New.

Daily bump.

libstdc++: Define (and use) _GLIBCXX_HAVE_ATOMIC_WAIT

In order to simplify the preprocessor checks for whether __atomic_wait
is available, this commit does:

-#if defined _GLIBCXX_HAS_GTHREADS || _GLIBCXX_HAVE_LINUX_FUTEX
+#ifdef _GLIBCXX_HAVE_ATOMIC_WAIT

The original was wrong anyway, as it should have used 'defined' to check
_GLIBCXX_HAVE_LINUX_FUTEX (for consistency with how that's used
elsewhere).

The new macro is defined in <bits/atomic_wait.h> when the file is
defines __atomic_wait and related facilities. All other code that
depends on those features can just check the one macro.

libstdc++-v3/ChangeLog:

* include/bits/atomic_wait.h (_GLIBCXX_HAVE_ATOMIC_WAIT):
Define.
* include/bits/atomic_base.h: Check _GLIBCXX_HAVE_ATOMIC_WAIT.
* include/bits/atomic_timed_wait.h: Likewise.
* include/bits/semaphore_base.h: Likewise.
* include/std/atomic: Likewise.
* include/std/latch: Likewise.
* include/std/semaphore: Likewise.

libstdc++: Only define std::latch if atomic waiting is available

libstdc++-v3/ChangeLog:

* include/std/latch: Depend on _GLIBCXX_HAS_GTHREADS and
_GLIBCXX_HAVE_LINUX_FUTEX.
* include/std/version (__cpp_lib_latch): Define conditionally.

libstc++: Fix typo in new check_effective_target_gthreads proc

Also fix copy&pasted comments referring to the wrong things.

libstdc++-v3/ChangeLog:

* testsuite/lib/libstdc++.exp (check_effective_target_gthreads):
Call check_v3_target_gthreads not check_v3_target_gthreads_timed.

libgfortran: Verify the presence of all functions for POSIX 2008 locale

While we have `configure' checks for the individual POSIX 2008 extended
locale functions we refer to and use to guard the respective call sites,
we only verify the presence of `newlocale' for our global feature enable
check.  Consequently compilation fails for targets like NetBSD that only
have partial support for POSIX 2008 locale features and in particular
lack the `uselocale' function:

.../libgfortran/io/transfer.c: In function 'data_transfer_init_worker':
.../libgfortran/io/transfer.c:3416:30: error:
'old_locale_lock' undeclared (first use in this function)
 3416 |       __gthread_mutex_lock (&old_locale_lock);
      |                              ^~~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:3416:30: note: each undeclared identifier is reported only once for each function it appears in
.../libgfortran/io/transfer.c:3417:12: error:
'old_locale_ctr' undeclared (first use in this function)
 3417 |       if (!old_locale_ctr++)
      |            ^~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:3419:11: error:
'old_locale' undeclared (first use in this function); did you mean 'c_locale'?
 3419 |           old_locale = setlocale (LC_NUMERIC, NULL);
      |           ^~~~~~~~~~
      |           c_locale
.../libgfortran/io/transfer.c: In function 'finalize_transfer':
.../libgfortran/io/transfer.c:4253:26: error:
'old_locale_lock' undeclared (first use in this function)
 4253 |   __gthread_mutex_lock (&old_locale_lock);
      |                          ^~~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:4254:10: error:
'old_locale_ctr' undeclared (first use in this function)
 4254 |   if (!--old_locale_ctr)
      |          ^~~~~~~~~~~~~~
.../libgfortran/io/transfer.c:4256:30: error:
'old_locale' undeclared (first use in this function); did you mean 'c_locale'?
 4256 |       setlocale (LC_NUMERIC, old_locale);
      |                              ^~~~~~~~~~
      |                              c_locale
make[3]: *** [Makefile:6221: transfer.lo] Error 1

Only enable the use of POSIX 2008 extended locale features then when all
the three functions required are present, removing said build errors.

libgfortran/
* io/io.h [HAVE_NEWLOCALE]: Also check for HAVE_FREELOCALE and
HAVE_USELOCALE.
[HAVE_FREELOCALE && HAVE_NEWLOCALE && HAVE_USELOCALE]
(HAVE_POSIX_2008_LOCALE): New macro.
(st_parameter_dt) [HAVE_NEWLOCALE]: Check for
HAVE_POSIX_2008_LOCALE instead.
* io/transfer.c (data_transfer_init_worker, finalize_transfer)
[HAVE_USELOCALE]: Check for HAVE_POSIX_2008_LOCALE instead.
* io/unit.c [HAVE_NEWLOCALE]: Likewise.
(init_units) [HAVE_NEWLOCALE]: Likewise.
(close_units) [HAVE_FREELOCALE]: Likewise.
* runtime/error.c (gf_strerror) [HAVE_USELOCALE]: Likewise.

libgfortran: Correct FP feature macro checks

The *_HAS_* floating-point feature macros are defined as 0/1 rather than
#undef/#define settings by gcc/c-family/c-cppbuiltin.c.  Consequently we
choose to use infinity and NaN features even with non-IEEE-754 targets
such as `vax-netbsdelf' that lack them, causing build warnings and
failures like:

In file included from .../libgfortran/generated/maxval_r4.c:26:
.../libgfortran/generated/maxval_r4.c: In function 'maxval_r4':
.../libgfortran/libgfortran.h:292:30: warning: target format does not support infinity
  292 | # define GFC_REAL_4_INFINITY __builtin_inff ()
      |                              ^~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c:149:19:
note: in expansion of macro 'GFC_REAL_4_INFINITY'
  149 |         result = -GFC_REAL_4_INFINITY;
      |                   ^~~~~~~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c: In function 'mmaxval_r4':
.../libgfortran/libgfortran.h:292:30: warning: target format does not support infinity
  292 | # define GFC_REAL_4_INFINITY __builtin_inff ()
      |                              ^~~~~~~~~~~~~~
.../libgfortran/generated/maxval_r4.c:363:19:
note: in expansion of macro 'GFC_REAL_4_INFINITY'
  363 |         result = -GFC_REAL_4_INFINITY;
      |                   ^~~~~~~~~~~~~~~~~~~
{standard input}: Assembler messages:
{standard input}:204: Fatal error: Can't relocate expression
make[3]: *** [Makefile:3358: maxval_r4.lo] Error 1

Correct the checks then for __FLT_HAS_INFINITY__, __DBL_HAS_INFINITY__,
__LDBL_HAS_INFINITY__, __FLT_HAS_QUIET_NAN__, __DBL_HAS_QUIET_NAN__, and
__LDBL_HAS_QUIET_NAN__ to match semantics and remove build issues coming
from the misinterpretation of these macros.

libgfortran/
* libgfortran.h: Use #if rather than #ifdef with
__FLT_HAS_INFINITY__, __DBL_HAS_INFINITY__,
__LDBL_HAS_INFINITY__, __FLT_HAS_QUIET_NAN__,
__DBL_HAS_QUIET_NAN__, and __LDBL_HAS_QUIET_NAN__.

libstdc++: Set dg-timeout-factor for some slow tests

These tests are very, very slow to compile. If the testsuite is run with
a low tool_timeout value they are likely to fail. By adding a
multiplication factor to those tests, it's still possible to use a low
timeout without spurious failures.

libstdc++-v3/ChangeLog:

* testsuite/28_regex/algorithms/regex_match/basic/string_range_01_03.cc:
Add dg-timeout-factor directive.
* testsuite/28_regex/algorithms/regex_match/cstring_bracket_01.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/ecma/char/backref.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/ecma/wchar_t/63199.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/ecma/wchar_t/anymatcher.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/ecma/wchar_t/cjk_match.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/ecma/wchar_t/hex.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_match/extended/wstring_locale.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_search/61720.cc: Likewise.
* testsuite/28_regex/algorithms/regex_search/ecma/assertion.cc:
Likewise.
* testsuite/28_regex/algorithms/regex_search/ecma/string_01.cc:
Likewise.
* testsuite/28_regex/basic_regex/ctors/deduction.cc: Likewise.

libstdc++: Allow dejagnu tool_timeout to be overridden

This allows the default timeout for libstdc++ tests to be set by the
user, either in ~/.dejagnurc or a site.exp file that $DEJAGNU names.

libstdc++-v3/ChangeLog:

* testsuite/lib/libstdc++.exp (libstdc++_init): Only set
tool_timeout if it hasn't been set by the user already.

libstdc++: Fix some more deadlocks in tests [PR 97936]

The missed notifications fixed in r11-5383 also happen in some other
tests which have similar code.

libstdc++-v3/ChangeLog:

PR libstdc++/97936
* testsuite/29_atomics/atomic/wait_notify/bool.cc: Fix missed
notifications by making the new thread wait until the parent
thread is waiting on the condition variable.
* testsuite/29_atomics/atomic/wait_notify/pointers.cc: Likewise.
* testsuite/29_atomics/atomic_flag/wait_notify/1.cc: Likewise.
* testsuite/29_atomics/atomic_ref/wait_notify.cc: Likewise.

libstdc++: Add "futex" and "gthreads" effective-target keywords

This adds a new "futex" effective-target keyword that can be used to
selectively enable/disable tests based on _GLIBCXX_HAVE_LINUX_FUTEX,
instead of checking for that macro in the code.

It also adds "gthreads" as another one, to make the result of the
dg-require-gthreads directive usable in target selectors.

With these new keywords two tests that are currently only run for linux
can also be run for targets using gthr-single.h (e.g. AIX single-thread
multilib, and targets without a gthreads implementation).

libstdc++-v3/ChangeLog:

* testsuite/18_support/96817.cc: Use new effective-target
keywords to select supported targets more effectively.
* testsuite/30_threads/call_once/66146.cc: Likewise.
* testsuite/lib/libstdc++.exp (check_effective_target_futex):
Define new proc.
(check_effective_target_gthreads): Define new proc to replace
dg-require-gthreads.

Fix PR target/96607

After 15 years trying to find out what can go into the delay slot of
the call to __tls_get_addr with the Solaris linker, it's now time to
concede defeat and consider it as not to be filled.

gcc/ChangeLog:
PR target/96607
* config/sparc/sparc-protos.h (eligible_for_call_delay): Delete.
* config/sparc/sparc.c (eligible_for_call_delay): Likewise.
* config/sparc/sparc.md (in_call_delay): Likewise.
(tls_delay_slot): New attribute.
(define_delay [call]): Use in_branch_delay.
(tgd_call<P:mode>): Set type to call_no_delay_slot when
tls_delay_slot is false.
(tldm_call<P:mode>): Likewise.

match.pd: Use ranges to optimize some x * y / y to x [PR97997]

For signed integers with undefined overflow we already optimize x * y / y
into x, but for signed integers with -fwrapv or unsigned integers we don't.
The following patch allows optimizing that into just x if value ranges
prove that x * y will never overflow.
It uses the global SSA_NAME_RANGE_INFO only, because like mentioned
in another PR we don't currently have a way to tell the ranger from match.pd
the use stmt (and we'd need in that case to tell ranger to only follow
SSA_NAME_DEF_STMTs + SSA_NAME_RANGE_INFO and never go in the other
direction, as following immediate uses seems forbidden in match.pd).
Another possibility would be to optimize this during vrp, but on the
other side the optimization itself is match.pd-ish.

2020-11-26  Jakub Jelinek  <jakub@redhat.com>

PR tree-optimization/97997
* match.pd ((t * 2) / 2) -> t): Optimize even for defined
overflow if ranges prove there is no overflow.

* gcc.dg/tree-ssa/pr97997-1.c: New test.
* gcc.dg/tree-ssa/pr97997-2.c: New test.

tree-optimization/97953 - fix bougs range recorded by EVRP

EVRP records some ranges from asserts into SSA_NAME_RANGE_INFO
but fails to assert that the condition the range is derived from
is always true after the SSA names definition.  The patch implements
the simplest post-dominance check, basic-block equality.

2020-11-26  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97953
* gimple-ssa-evrp-analyze.c
(evrp_range_analyzer::record_ranges_from_incoming_edge): Make
sure the condition post-dominates the SSA definition before
recording into SSA_NAME_RANGE_INFO.

* gcc.dg/pr97953.c: New testcase.

tree-optimization/98015 - fix VEC_COND_EXPR lowering condition

This fixes the condition to match the comment and only lower
VECTOR_BOOLEAN_TYPE_P VEC_COND_EXPRs.

2020-11-26  Richard Biener  <rguenther@suse.de>

* gimple-isel.cc (gimple_expand_vec_cond_expr): Only
lower VECTOR_BOOLEAN_TYPE_P VEC_COND_EXPRs.

Fix early-debug relocations

The relocation symbols were inadvertantly wiped when the type was set in
mkoffload.

gcc/ChangeLog

* config/gcn/mkoffload.c (copy_early_debug_info): Don't wipe
relocation symbols.

i386: Cleanup argument handling in ix86_expand_*_builtin functions.

There is no need for struct with rtx and mode members since mode is never used.

2020-11-26  Uroš Bizjak  <ubizjak@gmail.com>

gcc/
* config/i386/i386-expand.c (ix86_expand_multi_arg_builtin):
Remove args array of structs, declare rtx xops array instead.
Update all uses.
(ix86_expand_args_builtin): Ditto.
(ix86_expand_round_builtin): Ditto.
(ix86_expand_special_args_builtin): Ditto.

dwarf: fix language_string for C2X

gcc/ChangeLog:

* dwarf2out.c (gen_compile_unit_die): Fix missing == 0 in a
strcmp.

ada: c++: Get rid of libposix4, librt on Solaris

I recently noticed that neither libposix4 nor librt are needed on
Solaris 11 any longer:

* libposix4 was renamed to librt in Solaris 7 back in 1998.

* librt was folded into libc in the OpenSolaris timeframe, leaving librt
  only as a filter on libc.  Thus, it's no longer needed on either
  Solaris 11 or Illumos.

The following patch removes both uses.  At the same time, Ada's use of
libthread has gone: it was folded into libc in Solaris 10 already.
TIME_LIBRARY and friends in g++ are likewise removed: Solaris was the
only user.

Bootstrapped without regressions on i386-pc-solaris2.11,
sparc-sun-solaris2.11, and x86_64-pc-linux-gnu.

2020-11-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

gcc/cp:
* g++spec.c (TIMELIB, TIME_LIBRARY): Remove.
(lang_specific_driver): Remove TIME_LIBRARY handling.

gcc:
* config/sol2.h (TIME_LIBRARY): Remove.

libstdc++-v3:
* acinclude.m4 (GLIBCXX_ENABLE_LIBSTDCXX_TIME): Remove libposix4
references.
<solaris*>: Don't use -lrt any longer.
* configure: Regenerate.

* doc/xml/manual/configure.xml (--enable-libstdcxx-time=OPTION):
Remove libposix4 reference.

gcc/ada:
* Makefile.rtl <sparc*-sun-solaris*> (THREADSLIB): Remove.
(MISCLIB): Remove -lposix4.
<*86-*-solaris2*>: Likewise.
* libgnarl/s-osinte__solaris.ads (System.OS_Interface): Remove
-lposix4 -lthread.