binutils-gdb.git
17 years agogas/testsuite/
H.J. Lu [Sat, 23 Jun 2007 14:55:18 +0000 (14:55 +0000)]
gas/testsuite/

2007-06-23  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/4667
* gas/i386/i386.exp: Run simd, simd-intel, x86-64-simd
and x86-64-simd-intel.

* gas/i386/opcode-intel.d: Updated.

* gas/i386/simd-intel.d: New.
* gas/i386/simd.d: Likewise.
* gas/i386/simd.s: Likewise.
* gas/i386/x86-64-simd-intel.d: Likewise.
* gas/i386/x86-64-simd.d: Likewise.
* gas/i386/x86-64-simd.s: Likewise.

opcodes/

2007-06-23  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/4667
* i386-dis.c (EX): Removed.
(EMd): New.
(EMq): Likewise.
(EXd): Likewise.
(EXq): Likewise.
(EXx): Likewise.
(PREGRP93...PREGRP97): Likewise.
(dis386_twobyte): Updated.
(prefix_user_table): Updated. Add PREGRP93...PREGRP97.
(OP_EX): Remove Intel syntax handling.

17 years ago * configure.in (--with-separate-debug-dir): New option.
Andreas Schwab [Sat, 23 Jun 2007 08:40:54 +0000 (08:40 +0000)]
* configure.in (--with-separate-debug-dir): New option.
* configure: Regenerate.
* Makefile.am (dwarf2.lo): Add rule to pass DEBUGDIR.
* Makefile.in: Regenerate.
* dwarf2.c (_bfd_dwarf2_find_nearest_line): Pass DEBUGDIR to
bfd_follow_gnu_debuglink.
(_bfd_dwarf2_find_line): Likewise.

17 years ago*** empty log message ***
gdbadmin [Sat, 23 Jun 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

17 years agodaily update
Alan Modra [Sat, 23 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
Bob Wilson [Fri, 22 Jun 2007 18:44:50 +0000 (18:44 +0000)]
* config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
(frag_format_size): Handle RELAX_IMMED_STEP3.
(xtensa_relax_frag, md_convert_frag): Likewise.
* config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
(RELAX_IMMED_MAXSTEPS): Adjust.
* config/xtensa-relax.c (widen_spec_list): Add transitions from
wide branches to branch-over-jumps.
(build_transition): Handle wide branches in transition patterns.

17 years ago * src-release (DEVO_SUPPORT): Correct typos.
Daniel Jacobowitz [Fri, 22 Jun 2007 15:48:08 +0000 (15:48 +0000)]
* src-release (DEVO_SUPPORT): Correct typos.

17 years ago2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Fri, 22 Jun 2007 14:15:51 +0000 (14:15 +0000)]
2007-06-22  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (disp_size): New.
(imm_size): Likewise.
(output_disp): Use disp_size and imm_size.
(output_imm): Use imm_size.

17 years ago * infrun.c (adjust_pc_after_break): Do not assume software single-step
Ulrich Weigand [Fri, 22 Jun 2007 12:47:48 +0000 (12:47 +0000)]
* infrun.c (adjust_pc_after_break): Do not assume software single-step
is always active if SOFTWARE_SINGLE_STEP_P is true.
(resume): Use gdbarch_software_single_step[_p] instead of
SOFTWARE_SINGLE_STEP[_P].
(handle_inferior_event): Do not check for SOFTWARE_SINGLE_STEP_P.

* gdbarch.sh (software_single_step): Remove target macro.
* gdbarch.h, gdbarch.c: Regenerate.

17 years ago * gdbarch.sh (gdbarch_swap_ftype, deprecated_register_gdbarch_swap,
Ulrich Weigand [Fri, 22 Jun 2007 12:45:38 +0000 (12:45 +0000)]
* gdbarch.sh (gdbarch_swap_ftype, deprecated_register_gdbarch_swap,
DEPRECATED_REGISTER_GDBARCH_SWAP): Remove.
(struct gdbarch_swap, struct gdbarch_swap_registration,
struct gdbarch_swap_registry, gdbarch_swap_registry,
current_gdbarch_swap_init_hack, current_gdbarch_swap_out_hack,
current_gdbarch_swap_in_hack): Remove.
(find_arch_by_info): Do not call current_gdbarch_swap_init_hack.
(gdbarch_find_by_info): Do not call current_gdbarch_swap_in_hack
and current_gdbarch_swap_out_hack, update current_gdbarch directly.
(deprecated_current_gdbarch_select_hack): Likewise.
* gdbarch.h, gdbarch.c: Regenerate.

17 years ago * infrun.c (clear_proceed_status): Clean up stop_registers.
Ulrich Weigand [Fri, 22 Jun 2007 12:38:04 +0000 (12:38 +0000)]
* infrun.c (clear_proceed_status): Clean up stop_registers.
(normal_stop): Allocate regcache for stop_registers.
(struct inferior_status): Remove stop_registers member.
(save_inferior_status): Do not save stop_registers.
(restore_inferior_status): Do not restore stop_registers.
(discard_inferior_status): Do not discard stop_registers.
(build_infrun): Remove.
(_initialize_infrun): Do not swap stop_registers.

17 years ago * remote.c (remote_address_masked): If remote_address_size is zero,
Ulrich Weigand [Fri, 22 Jun 2007 12:36:00 +0000 (12:36 +0000)]
* remote.c (remote_address_masked): If remote_address_size is zero,
default to target address size.
(build_remote_gdbarch_data): Remove.
(_initialize_remote): Do not swap remote_address_size.

17 years ago * gdbtypes.h (builtin_type_true_char, builtin_type_void,
Ulrich Weigand [Fri, 22 Jun 2007 12:32:19 +0000 (12:32 +0000)]
* gdbtypes.h (builtin_type_true_char, builtin_type_void,
builtin_type_char, builtin_type_short, builtin_type_int,
builtin_type_long, builtin_type_signed_char,
builtin_type_unsigned_char, builtin_type_unsigned_short,
builtin_type_unsigned_int, builtin_type_unsigned_long,
builtin_type_float, builtin_type_double, builtin_type_long_double,
builtin_type_complex, builtin_type_double_complex, builtin_type_string,
builtin_type_bool, builtin_type_long_long,
builtin_type_unsigned_long_long, builtin_type_void_data_ptr,
builtin_type_void_func_ptr, builtin_type_CORE_ADDR): Replace global
variable declaration with compatibility macro.
* gdbtypes.c (builtin_type_true_char, builtin_type_void,
builtin_type_char, builtin_type_short, builtin_type_int,
builtin_type_long, builtin_type_signed_char,
builtin_type_unsigned_char, builtin_type_unsigned_short,
builtin_type_unsigned_int, builtin_type_unsigned_long,
builtin_type_float, builtin_type_double, builtin_type_long_double,
builtin_type_complex, builtin_type_double_complex, builtin_type_string,
builtin_type_bool, builtin_type_long_long,
builtin_type_unsigned_long_long, builtin_type_void_data_ptr,
builtin_type_void_func_ptr, builtin_type_CORE_ADDR): Remove.
(build_gdbtypes): Remove.
(_initialize_gdbtypes): Do not call build_gdbtypes, move installing
opaque-type-resolution command here.   Do not call
deprecated_register_gdbarch_swap.

17 years ago * gdbtypes.h (struct builtin_type): New members nodebug_text_symbol,
Ulrich Weigand [Fri, 22 Jun 2007 12:27:00 +0000 (12:27 +0000)]
* gdbtypes.h (struct builtin_type): New members nodebug_text_symbol,
nodebug_data_symbol, nodebug_unknown_symbol, and nodebug_tls_symbol.
* gdbtypes.c (gdbtypes_post_init): Initialize nodebug_ default types.

* parse.c (msym_text_symbol_type, msym_data_symbol_type): Remove.
(msym_unknown_symbol_type, msym_tls_symbol_type): Remove.
(write_exp_msymbol): Use builtin nodebug_ types instead of them.
(build_parse): Remove.
(_initialize_parse): Do not call build_parse.  Do not register
msym_ types for gdbarch-swapping.

* dwarf2read.c (new_symbol): Use default nodebug_data_symbol type
instead of creating private type.

* xcoffread.c (func_symbol_type, var_symbol_type): Remove.
(_initialize_xcoffread): Do not initialized them.
(process_xcoff_symbol): Use builtin nodebug_ types instead of them.

* mdebugread.c (nodebug_func_symbol_type): Remove.
(nodebug_var_symbol_type): Remove.
(_initialize_mdebugread): Do not initialize them.
(parse_symbol): Use builtin nodebug_ type instead of them.
(parse_procedure): Likewise.

17 years ago* dwarf2.c: Add support for reading in debug information via a .gnu_debuglink section:
Nick Clifton [Fri, 22 Jun 2007 08:13:12 +0000 (08:13 +0000)]
* dwarf2.c: Add support for reading in debug information via a .gnu_debuglink section:
  (struct dwarf2_debug): Add bfd field to record the bfd containing the debug info.
  (parse_comp_unit): Remove ABFD parameter.  Instead use the bfd field in the dwarf2_debug structure.
  (_bfd_dwarf2_find_nearest_line): If a debug info section could not be found in the current bfd call bfd_follow_gnu_debuglink to see if another file contains the debug information.  If it does, open it and continue.
  (bfd_dwarf2_find_line): Likewise.

17 years agodaily update
Alan Modra [Fri, 22 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Fri, 22 Jun 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

17 years agogdb/:
Maciej W. Rozycki [Thu, 21 Jun 2007 15:26:05 +0000 (15:26 +0000)]
gdb/:
* printcmd.c (do_one_display): If display/i, start with an initial
line feed to avoid bad layout if there is a branch delay slot.

gdb/testsuite/:
* gdb.base/display.exp: Allow a newline after display/i.
* gdb.base/pc-fp.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.

17 years agogdb/:
Maciej W. Rozycki [Thu, 21 Jun 2007 15:18:51 +0000 (15:18 +0000)]
gdb/:
* disasm.c (gdb_print_insn): Return the number of branch delay
slot instructions too.
* disasm.h (gdb_print_insn): Update prototype.
* printcmd.c (branch_delay_insns): New variable to record the
number of delay slot instructions after disassembling a branch.
(print_formatted): Record the number of branch delay slot
instructions.
(do_examine): When disassembling, if the last instruction
disassembled has any branch delay slots, then bump the count so
that they get disassembled too.
* tui/tui-disasm.c (tui_disassemble): Update the call to
gdb_print_insn().
* NEWS: Document the new behaviour.

gdb/doc/:
* gdb.texinfo (Examining Memory): Document the new behaviour.

gdb/gdbtk/:
* generic/gdbtk-cmds.c (gdbtk_load_asm): Update the call to
gdb_print_insn().

17 years ago * regcache.c (write_pc_pid): Restore missing else.
Andreas Schwab [Thu, 21 Jun 2007 12:10:48 +0000 (12:10 +0000)]
* regcache.c (write_pc_pid): Restore missing else.

17 years ago * gdb.texinfo (Standard Target Features): Document
Vladimir Prus [Thu, 21 Jun 2007 06:33:03 +0000 (06:33 +0000)]
    * gdb.texinfo (Standard Target Features): Document
        m68k features.

17 years ago * embedspu.sh (relas): Correct sh_info parsing.
Alan Modra [Thu, 21 Jun 2007 00:31:39 +0000 (00:31 +0000)]
* embedspu.sh (relas): Correct sh_info parsing.

17 years agodaily update
Alan Modra [Thu, 21 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Thu, 21 Jun 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

17 years ago * regcache.c (regcache_print): Use get_current_regcache ()
Ulrich Weigand [Wed, 20 Jun 2007 20:47:34 +0000 (20:47 +0000)]
* regcache.c (regcache_print): Use get_current_regcache ()
instead of current_regcache.

17 years ago * linux-low.c (linux_create_inferior): Try execv before execvp.
Daniel Jacobowitz [Wed, 20 Jun 2007 18:54:21 +0000 (18:54 +0000)]
* linux-low.c (linux_create_inferior): Try execv before execvp.
* spu-low.c (spu_create_inferior): Likewise.

17 years ago2007-06-20 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Wed, 20 Jun 2007 18:32:10 +0000 (18:32 +0000)]
2007-06-20  H.J. Lu  <hongjiu.lu@intel.com>

PR 4606
* gcore.c (gcore_command): Use bfd_make_section_anyway_with_flags
instead of bfd_make_section_anyway.
(gcore_create_callback): Likewise.  Also set SEC_NEVER_LOAD
when clearing SEC_LOAD.

17 years ago* gprof.texi: Refer readers to the gcov tool if they want line-by-line profiling.
Nick Clifton [Wed, 20 Jun 2007 09:03:52 +0000 (09:03 +0000)]
* gprof.texi: Refer readers to the gcov tool if they want line-by-line profiling.

17 years ago * emulparams/elf32_spu.sh (OTHER_SECTIONS): KEEP .note.spu_name.
Alan Modra [Wed, 20 Jun 2007 00:28:44 +0000 (00:28 +0000)]
* emulparams/elf32_spu.sh (OTHER_SECTIONS): KEEP .note.spu_name.

17 years ago*** empty log message ***
gdbadmin [Wed, 20 Jun 2007 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

17 years agodaily update
Alan Modra [Wed, 20 Jun 2007 00:00:04 +0000 (00:00 +0000)]
daily update

17 years ago * arm-tdep.c (arm_push_dummy_call): Correct padding of partial
Joseph Myers [Tue, 19 Jun 2007 22:44:13 +0000 (22:44 +0000)]
* arm-tdep.c (arm_push_dummy_call): Correct padding of partial
registers for big-endian.

17 years ago * objdump.c: Include sys/stat.h.
Danny Smith [Tue, 19 Jun 2007 21:08:17 +0000 (21:08 +0000)]
   * objdump.c: Include sys/stat.h.

17 years ago * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
Bob Wilson [Tue, 19 Jun 2007 19:08:37 +0000 (19:08 +0000)]
* config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
use of literal_frag field.
* config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
in the literal_frag field.
(xtensa_move_literals): Use it here instead of searching.  Update
literal_frag field with new value.

17 years ago2007-06-19 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Tue, 19 Jun 2007 17:30:37 +0000 (17:30 +0000)]
2007-06-19  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_PRINT_INSN): Replace by gdbarch_print_insn.
* disasm.c (dump_insns, gdb_print_insn): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago * gdbarch.sh (BELIEVE_PCC_PROMOTION): Replace by
Ulrich Weigand [Tue, 19 Jun 2007 17:21:51 +0000 (17:21 +0000)]
* gdbarch.sh (BELIEVE_PCC_PROMOTION): Replace by
gdbarch_believe_pcc_promotion.
* stabsread.c (define_symbol): Likewise.
Remove unnecessary definition.
* coffread.c (process_coff_symbol): Remove unnecessary code.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago * configure.ac: Do not use ${objdir}.
Daniel Jacobowitz [Tue, 19 Jun 2007 14:23:00 +0000 (14:23 +0000)]
* configure.ac: Do not use ${objdir}.
* configure: Regenerated.

17 years ago* Makefile.am: Add windmc tool.
Nick Clifton [Tue, 19 Jun 2007 13:24:33 +0000 (13:24 +0000)]
* Makefile.am: Add windmc tool.
* Makefile.in: Regenerate.
* configure.in: Add windmc tool.
* configure: Regenerate.
* mclex.c: New.
* mcparse.y: New.
* windmc.c: New.
* windmc.h: New.
* doc/Makefile.am: Add windmc tool.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add windmc documentation.
* NEWS: Mention new tool.

17 years agobfd/
H.J. Lu [Tue, 19 Jun 2007 13:05:55 +0000 (13:05 +0000)]
bfd/

2007-06-19  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4590
* elfxx-ia64.c (sort_dyn_sym_info): Keep the valid got_offset
when removing duplicated entries.
(get_dyn_sym_info): Initialize the got_offset field to -1.
Update call to sort_dyn_sym_info.
(elfNN_ia64_relocate_section): Call sort_dyn_sym_info to sort
array of addend and remove duplicates.

ld/testsuite/

2007-06-19  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/4590
* ld-ia64/merge1.d: New.
* ld-ia64/merge1.s: Likewise.
* ld-ia64/merge2.d: Likewise.
* ld-ia64/merge2.s: Likewise.
* ld-ia64/merge3.d: Likewise.
* ld-ia64/merge3.s: Likewise.
* ld-ia64/merge4.d: Likewise.
* ld-ia64/merge4.s: Likewise.
* ld-ia64/merge5.d: Likewise.
* ld-ia64/merge5.s: Likewise.

17 years agoAdd description of new --codepage switch for windres which was accidentally omitted...
Nick Clifton [Tue, 19 Jun 2007 11:29:05 +0000 (11:29 +0000)]
Add description of new --codepage switch for windres which was accidentally omitted when the full patch was checked in.

17 years ago*** empty log message ***
gdbadmin [Tue, 19 Jun 2007 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***

17 years agodaily update
Alan Modra [Tue, 19 Jun 2007 00:00:06 +0000 (00:00 +0000)]
daily update

17 years ago * gdbarch.sh (deprecated_register_size): Remove.
Ulrich Weigand [Mon, 18 Jun 2007 18:58:13 +0000 (18:58 +0000)]
* gdbarch.sh (deprecated_register_size): Remove.
* gdbarch.h, gdbarch.c: Regenerate.

* arm-tdep.c (arm_push_dummy_call): Replace DEPRECATED_REGISTER_SIZE
by INT_REGISTER_SIZE.
(thumb_get_next_pc, arm_return_in_memory): Likewise.
(arm_gdbarch_init): Do not call set_gdbarch_deprecated_register_size.
* ia64-tdep.c (ia64_gdbarch_init): Do not call
set_gdbarch_deprecated_register_size.

17 years ago * ld-scripts/cross3.t: Add .opd section.
Andreas Schwab [Mon, 18 Jun 2007 18:53:45 +0000 (18:53 +0000)]
* ld-scripts/cross3.t: Add .opd section.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 18:37:12 +0000 (18:37 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_FP_REGNUM): Replace by
gdbarch_deprecated_fp_regnum.
* std-regs.c (value_of_builtin_frame_fp_reg): Likewise.
* remote-mips.c (mips_wait, mips_fetch_registers): Likewise.
* arch-utils.c (legacy_virtual_frame_pointer): Likewise.
* arch-utils.h (gdbarch_virtual_frame_pointer_ftype): Likewise
(comment).
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 18:28:29 +0000 (18:28 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (EXTRACT_RETURN_VALUE): Replace with
gdbarch_extract_return_value.
* value.c (generic_use_struct_convention): Likewise (comment).
* ia64-tdep.c (ia64_use_struct_convention): Likewise (comment).
* arch-utils.c (legacy_return_value): Likewise.
* arch-utils.h (legacy_return_value): Likewise (comment).
* gdbarch.sh (STORE_RETURN_VALUE): Replace by
gdbarch_store_return_value.
* stack.c (return_command): Likewise (comment).
* arch-utils.h (legacy_return_value): Likewise (comment).
* arch-utils.c (legacy_return_value): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 18:25:59 +0000 (18:25 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_USE_STRUCT_CONVENTION): Replace by
gdbarch_deprecated_use_struct_convention.
* arch-utils.c (legacy_return_value): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 18:23:08 +0000 (18:23 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_FUNCTION_START_OFFSET): Replace by
gdbarch_deprecated_function_start_offset.
* symtab.c (find_function_start_sal)skip_prologue_using_sal): Likewise.
* linespec.c (minsym_found): Likewise.
* infrun.c (handle_inferior_event): Likewise.
* infcall.c (find_function_addr): Likewise.
* cli/cli-cmds.c (disassemble_command): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 18:19:00 +0000 (18:19 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_REG_STRUCT_HAS_ADDR): Replace by
gdbarch_deprecated_reg_struct_has_addr.
* infcall.c (call_function_by_hand): Likewise.
(DEPRECATED_REG_STRUCT_HAS_ADDR_P): Replace by
* gdbarch_deprecated_reg_struct_has_addr_p.
* infcall.c (call_function_by_hand): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 17:56:32 +0000 (17:56 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
* sh-tdep.c (sh_extract_struct_value_address): Remove.
(sh_gdbarch_init): Remove
set_gdbarch_deprecated_extract_struct_value_address.
* sh64-tdep.c (sh64_extract_struct_value_address): Remove.
(sh64_gdbarch_init): Remove
set_gdbarch_deprecated_extract_struct_value_address.
* ia64-tdep.c (ia64_extract_struct_value_address): Remove.
(ia64_gdbarch_init): Remove
set_gdbarch_deprecated_extract_struct_value_address.
* frv-tdep.c (frv_extract_struct_value_address): Remove.
(frv_gdbarch_init): Remove
set_gdbarch_deprecated_extract_struct_value_address.
* gdbarch.c, gdbarch.h: Regenerate.

17 years ago2007-06-18 Markus Deuling <deuling@de.ibm.com>
Ulrich Weigand [Mon, 18 Jun 2007 17:45:26 +0000 (17:45 +0000)]
2007-06-18  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (SP_REGNUM): Replace by gdbarch_sp_regnum.
* v850-tdep.c (v850_unwind_sp): Likewise.
* std-regs.c (value_of_builtin_frame_sp_reg): Likewise.
* stack.c (frame_info): Likewise.
* stabsread.c (define_symbol): Likewise.
* sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
(sh_dwarf2_frame_init_reg, sh_frame_cache, sh_frame_prev_register)
(sh_unwind_sp): Likewise.
* sh64-tdep.c (sh64_push_dummy_call, sh64_frame_cache)
(sh64_frame_prev_register, sh64_unwind_sp): Likewise.
* rs6000-tdep.c (rs6000_push_dummy_call, rs6000_unwind_dummy_id)
(rs6000_frame_cache): Likewise.
* rs6000-nat.c (store_register): Likewise.
* remote-mips.c (mips_wait): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_push_dummy_call): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* m32r-rom.c (m32r_supply_register): Likewise.
* frame.c (frame_sp_unwind): Likewise.
* mips-tdep.c (mips_insn16_frame_cache)
(mips_insn32_frame_cache): Likewise (comment).
* m68klinux-nat.c (supply_gregset): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* ia64-tdep.c (ia64_frame_prev_register): Likewise.
* i386-tdep.c (i386_get_longjmp_target): Likewise.
* dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
* cris-tdep.c (cris_regnums, cris_sigcontext_addr)
(cris_sigtramp_frame_unwind_cache, cris_push_dummy_call)
(cris_scan_prologue, crisv32_scan_prologue, cris_unwind_sp)
(cris_register_type, crisv32_register_type)
(cris_dwarf2_frame_init_reg): Likewise.
* arch-utils.c (legacy_virtual_frame_pointer): Likewise.
* amd64-tdep.c (amd64_frame_prev_register): Likewise.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
* libunwind-frame.c (libunwind_frame_cache): Likewise.

* gdbarch.sh (PC_REGNUM): Replace by gdbarch_pc_regnum.
* regcache.c (read_pc_pid, generic_target_write_pc): Likewise.
* xtensa-tdep.c (xtensa_register_type, xtensa_supply_gregset)
(xtensa_unwind_pc, xtensa_frame_cache, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value): Likewise.
* v850-tdep.c (v850_unwind_pc): Likewise.
* stack.c (frame_info): Likewise.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs)
(sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs)
(sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs)
(sh_dwarf2_frame_init_reg, sh_frame_prev_register, sh_unwind_pc)
(sh_dsp_show_regs): Likewise.
* shnbsd-tdep.c (shnbsd_supply_gregset)
(shnbsd_collect_gregset): Likewise.
* shnbsd-nat.c (GETREGS_SUPPLIES): Likewise.
* sh64-tdep.c (sh64_compact_reg_base_num, sh64_show_media_regs)
(sh64_frame_prev_register, sh64_unwind_pc): Likewise.
* rs6000-tdep.c (ppc_supply_gregset, ppc_collect_gregset)
(6000_register_reggroup_p, rs6000_unwind_pc)
(rs6000_frame_cache): Likewise.
* rs6000-nat.c (regmap, rs6000_fetch_inferior_registers)
(rs6000_store_inferior_registers): Likewise.
* remote-mips.c (mips_wait, mips_load): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppcnbsd-nat.c (getregs_supplies, ppcnbsd_supply_pcb): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* ppc-linux-nat.c (ppc_register_u_addr, fetch_ppc_registers)
(store_ppc_registers, fill_gregset): Likewise.
* mips-tdep.c (mips_stub_frame_cache, mips_gdbarch_init): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg): Likewise.
* mipsnbsd-nat.c (getregs_supplies): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc): Likewise.
* m68klinux-nat.c (supply_gregset): Likewise.
* irix5-nat.c (fill_gregset): Likewise.
* i386-tdep.c (i386_unwind_pc): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* frame.c (get_prev_frame_1): Likewise.
* dwarf2-frame.c (dwarf2_frame_default_init_reg): Likewise.
* dbug-rom.c (dbug_supply_register): Likewise.
* cris-tdep.c (cris_sigtramp_frame_unwind_cache, cris_scan_prologue)
(crisv32_scan_prologue, cris_unwind_pc, cris_register_size)
(cris_register_type, crisv32_register_type, crisv32_register_name)
(cris_dwarf2_frame_init_reg, find_step_target)
(cris_software_single_step, cris_supply_gregset)
(cris_regnums): Likewise.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
* aix-thread.c (special_register_p, supply_sprs64, supply_sprs32)
(fill_sprs64, fill_sprs32, store_regs_user_thread): Likewise.
* mips-linux-tdep.c (mips_linux_write_pc): Likewise.

* gdbarch.sh (PS_REGNUM): Replace by gdbarch_ps_regnum.
* dbug-rom.c (dbug_supply_register): Likewise.
* xtensa-tdep.c (xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register, xtensa_push_dummy_call): Likewise.
* win32-nat.c (win32_resume): Likewise.
* std-regs.c (value_of_builtin_frame_ps_reg)
(value_of_builtin_frame_pc_reg): Likewise.
* m68k-tdep.c (m68k_register_type): Likewise.
* m68klinux-nat.c (supply_gregset): Likewise.

* gdbarch.sh (FP0_REGNUM): Replace by gdbarch_fp0_regnum.
* sh-tdep.c (sh_extract_return_value_fpu, sh_store_return_value_fpu)
(sh2e_show_regs, sh2a_show_regs, sh3e_show_regs, sh4_show_regs)
(sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
(fv_reg_base_num, dr_reg_base_num): Likewise.
* sh64-tdep.c (sh64_fv_reg_base_num, sh64_dr_reg_base_num)
(sh64_fpp_reg_base_num, sh64_compact_reg_base_num, sh64_push_dummy_call)
(sh64_extract_return_value, sh64_store_return_value)
(sh64_show_media_regs, sh64_show_compact_regs, sh64_register_type)
(sh64_do_fp_register, sh64_media_print_registers_info): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers)
(invalidate_cache): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_supply_fpreg)
(mipsnbsd_fill_fpreg): Likewise.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Likewise.
* mips-linux-tdep.c (mips_supply_fpregset, mips_fill_fpregset)
(mips64_supply_fpregset, mips64_fill_fpregset): Likewise.
* mips-linux-nat.c (mips64_linux_register_addr): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_convert_register_p): Likewise.
* m68klinux-nat.c (getfpregs_supplies, supply_fpregset)
(fill_fpregset): Likewise.
* irix5-nat.c (supply_fpregset, fill_fpregset): Likewise.
* i386-tdep.h (struct_return): Likewise (comment).
* i386-nto-tdep.c (i386nto_register_area): Likewise.
* go32-nat.c (fetch_register, go32_fetch_registers, store_register)
(go32_store_registers): Likewise.
* alpha-tdep.c (alpha_next_pc): Likewise.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
* alphabsd-nat.c (alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Likewise.
* core-regset.c (fetch_core_registers): Likewise.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.

* gdbarch.c, gdbarch.h: Regenerate.

17 years agoMove entry for doc/Makefile.in to doc/ChangeLog.
H.J. Lu [Mon, 18 Jun 2007 17:44:45 +0000 (17:44 +0000)]
Move entry for doc/Makefile.in to doc/ChangeLog.

17 years ago* objdump.c: Include sys/mman.h
Nick Clifton [Mon, 18 Jun 2007 16:38:49 +0000 (16:38 +0000)]
* objdump.c: Include sys/mman.h
  (print_file_list): Remove f, add map, mapsize, linemap, maxline, last_line, first fields.
  (slurp_file): Add.
  (index_file): Add.
  (print_file_open): Call slurp_file and index_file. Initialize new fields.
  (skip_to_line): Rename to print_line and write only single line.
  (dump_line): Add.
  (show_line): Change to new algorithm.

17 years ago2007-06-18 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Mon, 18 Jun 2007 16:26:28 +0000 (16:26 +0000)]
2007-06-18  H.J. Lu  <hongjiu.lu@intel.com>

* libpei.h (_bfd_XXi_final_link_postscript): Remove
duplication.
(bfd_target_pei_p): New.
(bfd_target_pei_arch): New
(bfd_target_efi_p): Likewise.
(bfd_target_efi_arch): New
(bfd_pe_executable_p): Use bfd_target_pei_p and
bfd_target_efi_p.

* peicode.h (arch_type): New enum.
(pe_arch): New function.
(pe_bfd_object_p): Don't match PE/EFI target with EFI/PE file
if there is an EFI/PE target.

17 years agoopcodes/
Kazu Hirata [Mon, 18 Jun 2007 16:10:27 +0000 (16:10 +0000)]
opcodes/
* m68k-opc.c (m68k_opcodes): Add wdebugl variants.

gas/testsuite/
* gas/m68k/all.exp: Run mcf-wdebug.
* gas/testsuite/gas/m68k/mcf-wdebug.d,
gas/testsuite/gas/m68k/mcf-wdebug.s: New.

17 years ago* resres.c (probe_binary): Fix test for badly formatted headers.
Nick Clifton [Mon, 18 Jun 2007 16:02:45 +0000 (16:02 +0000)]
* resres.c (probe_binary): Fix test for badly formatted headers.

17 years ago * coffread.c (coff_sym_fns): Add default_symfile_segments.
Daniel Jacobowitz [Mon, 18 Jun 2007 15:46:38 +0000 (15:46 +0000)]
* coffread.c (coff_sym_fns): Add default_symfile_segments.
* dbxread.c (start_psymtab): Check HAVE_ELF.
(aout_sym_fns): Likewise.
* elfread.c (elf_symfile_segments): New.
(elf_sym_fns): Add elf_symfile_segments.
* mipsread.c (ecoff_sym_fns): Add default_symfile_segments.
* remote.c (get_offsets): Use symfile_map_offsets_to_segments.
Skip if there is no symfile_objfile.  Handle TextSeg and DataSeg.
* somread.c (som_sym_fns): Use default_symfile_segments.
* symfile.c (find_sym_fns): Take a BFD and return the sym_fns.
(init_objfile_sect_indices): Call symfile_find_segment_sections.
(default_symfile_segments): New function.
(syms_from_objfile): Update call to find_sym_fns.
(symfile_get_segment_data, free_symfile_segment_data): New.
(symfile_map_offsets_to_segments): New.
(symfile_find_segment_sections): New.
* symfile.h (struct symfile_segment_data): New.
(struct sym_fns): Add sym_segments.
(default_symfile_segments, symfile_get_segment_data)
(free_symfile_segment_data): New prototypes.
(symfile_map_offsets_to_segments): Likewise.
* xcoffread.c (xcoff_sym_fns): Add default_symfile_segments.
* Makefile.in (COMMON_OBS): Remove elfread.o.
(elf_internal_h): New.
(elfread.o): Update.
* configure.ac: Add elfread.o to COMMON_OBS if bfd/elf.o was
compiled.
* config.in, configure: Regenerated.
* NEWS: Mention qOffsets changes.

* gdb.texinfo (General Query Packets): Document qOffsets changes.

* Makefile.def: Add dependency from configure-gdb to all-bfd.
* Makefile.in: Regenerated.

17 years ago* rclex.c: (cpp_line): Add code_page pragma support.
Nick Clifton [Mon, 18 Jun 2007 15:30:33 +0000 (15:30 +0000)]
* rclex.c: (cpp_line): Add code_page pragma support.
* windres.c: (usage, long_options, main): Add new option --codepage or -c.
* winduni.c: (wind_default_codepage, wind_current_codepage): New.
  (unicode_from_ascii, ascii_from_unicode): Use wind_current_codepage as codepage parameter.
  (unicode_print): Print 4 characters for hexadecimal values in unicode strings.
* winduni.h:  (wind_default_codepage, wind_current_codepage): Export.
* doc/binutils.texi: Document new option.
* NEWS: Mention new feature.

17 years ago * ldlex.l, ldgram.y: Add ALIGNOF.
Nathan Sidwell [Mon, 18 Jun 2007 14:23:57 +0000 (14:23 +0000)]
* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.
: ----------------------------------------------------------------------

17 years ago * ldlex.l, ldgram.y: Add ALIGNOF.
Nathan Sidwell [Mon, 18 Jun 2007 12:38:22 +0000 (12:38 +0000)]
* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.

ld/testsuite/
* ld-scripts/alignof.s: New.
* ld-scripts/alignof.t: New
* ld-scripts/alignof.exp: New.

17 years ago * Makefile.am: Add eelf32_spu.o rule.
Alan Modra [Mon, 18 Jun 2007 10:58:07 +0000 (10:58 +0000)]
* Makefile.am: Add eelf32_spu.o rule.
* Makefile.in: Regenerate.
* emultempl/spuelf.em: Revert last change.  Instead use EMBEDSPU
defined in Makefile for embedspu name.

17 years ago * emultempl/spuelf.em (embedded_spu_file): Deduce embedspu program
Alan Modra [Mon, 18 Jun 2007 02:23:56 +0000 (02:23 +0000)]
* emultempl/spuelf.em (embedded_spu_file): Deduce embedspu program
name prefix from that of ld.

17 years ago * embedspu.sh: Parse _SPUEAR_ symbol values as hex.
Alan Modra [Mon, 18 Jun 2007 02:09:20 +0000 (02:09 +0000)]
* embedspu.sh: Parse _SPUEAR_ symbol values as hex.

17 years agodaily update
Alan Modra [Mon, 18 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Mon, 18 Jun 2007 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

17 years agodaily update
Alan Modra [Sun, 17 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Sun, 17 Jun 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

17 years ago * gdbtypes.h (builtin_type_m2_char, builtin_type_m2_int,
Ulrich Weigand [Sat, 16 Jun 2007 20:10:51 +0000 (20:10 +0000)]
* gdbtypes.h (builtin_type_m2_char, builtin_type_m2_int,
builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
Replace global variable declaration with compatibility macro.
(struct builtin_m2_type): New data type.
(builtin_m2_type): Add prototype.
* m2-lang.c (builtin_type_m2_char, builtin_type_m2_int,
builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
Remove global variables.
(m2_language_arch_info): Use builtin_m2_type instead of variables.
(build_m2_types): New function.
(m2_type_data): New variable.
(builtin_m2_type): New function.
(_initialize_m2_language): Do not build data types.  Register
m2_type_data per-gdbarch data.

17 years ago * gdbtypes.h (builtin_type_f_character, builtin_type_f_logical,
Ulrich Weigand [Sat, 16 Jun 2007 20:09:07 +0000 (20:09 +0000)]
* gdbtypes.h (builtin_type_f_character, builtin_type_f_logical,
builtin_type_f_logical_s1, builtin_type_f_logical_s2,
builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
builtin_type_f_real_s8, builtin_type_f_real_s16,
builtin_type_f_complex_s8, builtin_type_f_complex_s16,
builtin_type_f_complex_s32, builtin_type_f_void): Replace global
variable declaration with compatibility macro.
(struct builtin_f_type): New data type.
(builtin_f_type): Add prototype.
* f-lang.c (builtin_type_f_character, builtin_type_f_logical,
builtin_type_f_logical_s1, builtin_type_f_logical_s2,
builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
builtin_type_f_real_s8, builtin_type_f_real_s16,
builtin_type_f_complex_s8, builtin_type_f_complex_s16,
builtin_type_f_complex_s32, builtin_type_f_void): Remove variables.
(f_language_arch_info): Use builtin_f_type instead of variables.
(build_fortran_types): Build builtin_f_type structure instead of
setting global type variables.
(f_type_data): New variable.
(builtin_f_type): New function.
(_initialize_f_language): Do not call build_fortran_types.  Do not
swap global type variables.  Register f_type_data per-gdbarch data.

17 years ago * f-lang.c (_initialize_f_language): Do not initialize or
Ulrich Weigand [Sat, 16 Jun 2007 20:06:15 +0000 (20:06 +0000)]
* f-lang.c (_initialize_f_language): Do not initialize or
swap builtin_type_string.

17 years ago * std-regs.c (builtin_type_frame_reg, build_builtin_type_frame_reg,
Ulrich Weigand [Sat, 16 Jun 2007 18:31:26 +0000 (18:31 +0000)]
* std-regs.c (builtin_type_frame_reg, build_builtin_type_frame_reg,
value_of_builtin_frame_reg): Remove.
(_initialize_frame_reg): Do not swap builtin_type_frame_reg.  Remove
inactive call to value_of_builtin_frame_reg.

17 years ago * gdbarch.sh (bfd_vma): Remove.
Ulrich Weigand [Sat, 16 Jun 2007 18:28:24 +0000 (18:28 +0000)]
* gdbarch.sh (bfd_vma): Remove.
* gdbarch.c, gdbarch.h: Regenerate.

* gdbtypes.h (builtin_bfd_vma_type): Remove.
* gdbtypes.h (builtin_bfd_vma_type): Remove.
(build_gdbtypes): Do not initialize it.
(_initialize_gdbtypes): Do not swap it.

17 years ago * gdbtypes.c (builtin_type_v2_double, builtin_type_v4_float,
Ulrich Weigand [Sat, 16 Jun 2007 17:25:59 +0000 (17:25 +0000)]
* gdbtypes.c (builtin_type_v2_double, builtin_type_v4_float,
builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi,
builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
builtin_type_vec64, builtin_type_vec128): Remove.
(init_simd_type): Remove.
(init_vector_type): Make global.
(build_builtin_type_vec64, build_builtin_type_vec128): Remove.
(build_gdbtypes): Do not build vector types.
(_initialize_gdbtypes): Do not swap vector types.
* gdbtypes.h (builtin_type_v2_double, builtin_type_v4_float,
builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi,
builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
builtin_type_vec64, builtin_type_vec128): Remove declarations.
(init_vector_type): Add prototype.

* i386-tdep.h (struct gdbarch_tdep): Add i386_mmx_type and
i386_sse_type members.
(i386_mmx_type, i386_sse_type): Change from variables to functions.
* i386-tdep.c (i386_mmx_type, i386_sse_type): Remove variables.
(i386_init_types): Do not build vector types.
(i386_mmx_type, i386_sse_type): New functions.
(i386_register_type): Call them instead of using global variables.
(i386_gdbarch_init): Use XCALLOC to allocate tdep structure.
* amd64-tdep.c (amd64_register_type): Call i386_sse_type instead
of using global variable.

* rs6000-tdep.h (struct gdbarch_tdep): Add ppc_builtin_type_vec64
and ppc_builtin_type_vec128 members.
* rs6000-tdep.c (rs6000_builtin_type_vec64): New function.
(rs6000_builtin_type_vec128): Likewise.
(rs6000_register_type): Call them instead of using builtin_type_vec64
and builtin_type_vec128.
(rs6000_gdbarch_init): Use XCALLOC to allocate tdep structure.

* spu-tdep.c (struct gdbarch_tdep): New data type.
(spu_builtin_type_vec128): Remove variable.
(spu_builtin_type_vec128): New function.
(spu_register_type): Call it instead of using global variable.
(spu_gdbarch_init): Allocate tdep structure.
(spu_init_vector_type): Remove function.
(_initialize_spu_tdep): Do not call it.

17 years ago * amd64-tdep.c (struct amd64_register_info): Remove.
Ulrich Weigand [Sat, 16 Jun 2007 17:24:18 +0000 (17:24 +0000)]
* amd64-tdep.c (struct amd64_register_info): Remove.
(amd64_register_info): Remove.
(amd64_register_names): New static variable.
(AMD64_NUM_REGS): Use amd64_register_names instead of
amd64_register_info.
(amd64_register_name): Likewise.
(amd64_register_type): Do not refer to amd64_register_info.

* s390-tdep.c (struct s390_register_info): Remove.
(s390_register_info): Remove.
(s390_register_name): Do not refer to s390_register_info.
(s390_register_type): Likewise.

* sparc64-tdep.c (struct sparc64_register_info): Remove.
(sparc64_register_info, sparc64_pseudo_register_info): Remove.
(sparc64_register_names, sparc64_pseudo_register_names): New.
(SPARC64_NUM_REGS, SPARC64_NUM_PSEUDO_REGS): Use
sparc64_register_names and sparc64_pseudo_register_names instead of
sparc64_register_info and sparc64_pseudo_register_info.
(sparc64_register_name): Likewise.
(sparc64_register_type): Do not refer to sparc64_register_info
and sparc64_pseudo_register_info.

17 years ago * c-lang.c (cplus_builtin_types): Remove.
Ulrich Weigand [Sat, 16 Jun 2007 17:23:12 +0000 (17:23 +0000)]
* c-lang.c (cplus_builtin_types): Remove.
(enum cplus_primitive_types): New data type.
(cplus_language_arch_info): New function.
(cplus_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* f-lang.c (f_builtin_types): Remove.
(enum f_primitive_types): New data type.
(f_language_arch_info): New function.
(f_language_de): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* m2-lang.c (m2_builtin_types): Remove.
(enum m2_primitive_types): New data type.
(m2_language_arch_info): New function.
(m2_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* objc-lang.c (objc_builtin_types): Remove.
(objc_language): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* p-lang.c (pascal_builtin_types): Remove.
(enum pascal_primitive_types): New data type.
(pascal_language_arch_info): New function.
(pascal_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

17 years ago * regcache.c (struct regcache): Add ptid_t member.
Ulrich Weigand [Sat, 16 Jun 2007 17:16:26 +0000 (17:16 +0000)]
* regcache.c (struct regcache): Add ptid_t member.
(regcache_xmalloc): Initialize it.
(regcache_cpy_no_passthrough): Do not refer to current_regcache.
(regcache_dup): Likewise.
(regcache_dup_no_passthrough): Likewise.
(current_regcache): Make static.
(registers_ptid): Remove variable.
(get_thread_regcache): New function.
(get_current_regcache): New function.
(registers_changed): Implement by freeing current regcache.
(regcache_raw_read): Do not refer to current_regcache.  Set
inferior_ptid to regcache->ptid while calling target routines.
(regcache_raw_write): Likewise.
(regcache_raw_supply): Do not refer to current_regcache.
(read_pc_pid): Use thread regcache.  Do not modify inferior_ptid.
(write_pc_pid): Likewise.
(build_regcache): Remove.
(_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
or deprecated_register_gdbarch_swap.  Do not initialize
registers_ptid.
* regcache.h (get_current_regcache): Add prototype.
(get_thread_regcache): Likewise.
(current_regcache): Remove declaration.

* corelow.c (core_open): Replace current_regcache by
get_current_regcache ().
* frame.c (frame_pop): Likewise.
(put_frame_register): Likewise.
(get_current_frame, create_new_frame): Likewise.
* mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
* stack.c (return_command): Likewise.
* infcall.c (call_function_by_hand): Likewise.
* infrun.c (resume): Likewise.
(save_inferior_status, restore_inferior_status): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
(fork_save_infrun_state): Likewise.
* win32-nat.c (win32_resume): Likewise.
* i386fbsd-nat.c (i386fbsd_resume): Likewise.
* monitor.c (monitor_wait): Likewise.
* remote.c (remote_wait): Likewise.
* remote-mips.c (mips_wait): Likewise.

* bsd-kvm.c (bsd_kvm_open): Likewise
(bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
* fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_stopped_data_address): Likewise.

* frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mep-tdep.c (current_me_module, current_options): Likewise.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.

* linux-nat.c (linux_nat_do_thread_registers): Use thread
regcache instead of current_regcache.  Call target_fetch_registers.
(linux_nat_corefile_thread_callback): Update call site.
(linux_nat_do_registers): Likewise.
* procfs.c (procfs_do_thread_registers): Use thread regcache instead
of current_regcache.
(procfs_make_note_section): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.

17 years agodaily update
Alan Modra [Sat, 16 Jun 2007 00:00:05 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Sat, 16 Jun 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

17 years ago * regcache.c (read_register, read_register_pid): Remove.
Ulrich Weigand [Fri, 15 Jun 2007 22:45:57 +0000 (22:45 +0000)]
* regcache.c (read_register, read_register_pid): Remove.
(write_register, write_register_pid): Likewise.
* regcache.h (read_register, read_register_pid): Remove prototype.
(write_register, write_register_pid): Likewise.

17 years ago * gdbarch.sh (read_pc): Add REGCACHE argument. Remove PTID argument.
Ulrich Weigand [Fri, 15 Jun 2007 22:44:56 +0000 (22:44 +0000)]
* gdbarch.sh (read_pc): Add REGCACHE argument.  Remove PTID argument.
(write_pc): Likewise.  Remove default implementation, add predicate.
* gdbarch.c, gdbarch.h: Regenerate.
* regcache.c (read_pc_pid): Use current regcache instead of calling
read_register_pid.
(write_pc_pid): Check gdbarch_write_pc predicate, implement default
case inline.
(generic_target_write_pc): Remove.
* inferior.h (generic_target_write_pc): Remove.
* frv-tdep.c (frv_gdbarch_init): Do not install it.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.

* avr-tdep.c (avr_read_pc): Add REGCACHE argument.  Remove PTID
argument.  Use REGCACHE instead of calling read_register_pid.
* hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise.
* hppa-tdep.c (hppa_read_pc): Likewise.
* hppa-tdep.h (hppa_read_pc): Likewise.
* ia64-tdep.c (ia64_read_pc): Likewise.
* m32r-tdep.c (m32r_read_pc): Likewise.
* mep-tdep.c (mep_read_pc): Likewise.
* mn10300-tdep.c (mn10300_read_pc): Likewise.
* spu-tdep.c (spu_read_pc): Likewise.

* arm-tdep.c (arm_write_pc): Add REGCACHE argument.  Remove PTID
argument.  Use REGCACHE instead of calling write_register_pid.
* avr-tdep.c (avr_write_pc): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise.
* hppa-tdep.c (hppa_write_pc): Likewise.
* hppa-tdep.h (hppa_write_pc): Likewise.
* i386-linux-tdep.c (i386_linux_write_pc): Likewise.
* amd64-linux-tdep.c (amd64_linux_write_pc): Likewise.
* ia64-linux-tdep.c (ia64_linux_write_pc): Likewise.
* ia64-tdep.c (ia64_write_pc): Likewise.
* ia64-tdep.h (ia64_write_pc): Likewise.
* m32r-tdep.c (m32r_write_pc): Likewise.
* m88k-tdep.c (m88k_write_pc): Likewise.
* mep-tdep.c (mep_write_pc): Likewise.
* mips-tdep.c (mips_write_pc): Likewise.
* mips-linux-tdep.c (mips_linux_write_pc): Likewise.
* mn10300-tdep.c (mn10300_write_pc): Likewise.
* sparc-tdep.c (sparc_write_pc): Likewise.
* spu-tdep.c (spu_write_pc): Likewise.

* mips-tdep.c (read_signed_register): Remove.
(read_signed_register_pid): Likewise.
(mips_read_pc): Add REGCACHE argument.  Remove PTID argument.
Use REGCACHE instead of calling read_signed_register_pid.

17 years ago * gdbarch.sh (push_dummy_code): Add REGCACHE argument.
Ulrich Weigand [Fri, 15 Jun 2007 22:42:22 +0000 (22:42 +0000)]
* gdbarch.sh (push_dummy_code): Add REGCACHE argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infcall.c (generic_push_dummy_code): Add REGCACHE argument.
(push_dummy_code): Likewise.  Pass it to callee.
(call_function_by_hand): Pass current regcache to push_dummy_code.

* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Add REGCACHE
argument.  Use it instead of current_regcache.

* cris-tdep.c (cris_push_dummy_code): Add REGCACHE argument.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

17 years ago * gdbarch.sh (get_longjmp_target): Add FRAME argument.
Ulrich Weigand [Fri, 15 Jun 2007 22:41:13 +0000 (22:41 +0000)]
* gdbarch.sh (get_longjmp_target): Add FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (handle_inferior_event): Pass current frame to
gdbarch_get_longjmp_target.

* alpha-tdep.c (alpha_get_longjmp_target): Add FRAME argument.
Read registers from FRAME instead of using read_register.
Use get_frame_arch instead of current_gdbarch.
* arm-tdep.c (arm_get_longjmp_target): Likewise.
* i386-tdep.c (i386_get_longjmp_target): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target): Likewise.
(mips64_linux_get_longjmp_target): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.

17 years ago * gdbarch.sh (skip_trampoline_code): Add FRAME argument.
Ulrich Weigand [Fri, 15 Jun 2007 22:39:52 +0000 (22:39 +0000)]
* gdbarch.sh (skip_trampoline_code): Add FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (generic_skip_trampoline_code): Add FRAME argument.
* arch-utils.h (generic_skip_trampoline_code): Likewise.
* infrun.c (handle_inferior_event): Pass current frame to
gdbarch_skip_trampoline_code and skip_language_trampoline.

* language.c (unk_lang_trampoline): Add FRAME argument.
(skip_language_trampoline): Add FRAME argument.  Pass it to
skip_trampoline callback.
* language.h: Add forward declaration of struct frame_info.
(struct language_defn): Add FRAME argument to skip_trampoline.
(skip_language_trampoline): Add FRAME argument.
* cp-abi.c (cplus_skip_trampoline): Add FRAME argument.  Pass it
to skip_trampoline callback.
* cp-abi.h: Add forward declaration of struct frame_info.
(cplus_skip_trampoline): Add FRAME argument.
(struct cp_abi_ops): Add FRAME argument to skip_trampoline callback.
* gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument.  Pass it
to gdbarch_skip_trampoline_code.
* objc-lang.c (objc_skip_trampoline): Add FRAME argument.  Pass it
to gdbarch_skip_trampoline_code.

* minsyms.c (find_solib_trampoline_target): Add FRAME argument.
* symtab.h (find_solib_trampoline_target): Likewise.
* obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to
find_solib_trampoline_target.

* arm-tdep.c (arm_skip_stub): Add FRAME argument.  Read registers
from FRAME instead of calling read_register.

* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME
argument.  Read registers from FRAME instead of using read_register.
* hppa-tdep.c (hppa_skip_trampoline_code): Likewise.
* hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument.

* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME
argument.

* m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument.

* mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument.  Read
registers from FRAME instead of using read_signed_register.

* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME
argument.
(ppc64_standard_linkage_target): Likewise.  Read registers from FRAME
instead of using read_register.
(ppc64_skip_trampoline_code): Add FRAME argument.  Pass it to
ppc64_standard_linkage_target.
* rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument.
Pass it to find_solib_trampoline_target.  Read registers from FRAME
instead of using read_register.

* xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME
argument.

17 years ago * gdbarch.sh (software_single_step): Replace REGCACHE argument by
Ulrich Weigand [Fri, 15 Jun 2007 22:37:35 +0000 (22:37 +0000)]
* gdbarch.sh (software_single_step): Replace REGCACHE argument by
FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (resume): Pass current frame to SOFTWARE_SINGLE_STEP.

* alpha-tdep.c (alpha_next_pc): Add FRAME argument.  Retrieve
registers from FRAME instead of using read_register.
(alpha_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to alpha_next_pc.  Use get_frame_pc instead of read_pc.
* alpha-tdep.h (alpha_software_single_step): Replace REGCACHE
argument by FRAME.

* arm-tdep.c (shifted_reg_val): Add FRAME argument.  Read registers
from FRAME instead of using read_register.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
(arm_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to arm_get_next_pc.  Use get_frame_pc instead of read_register.
* arm-tdep.h (arm_software_single_step): Replace REGCACHE
argument by FRAME.

* cris-tdep.c (find_step_target): Add FRAME argument.  Read registers
from FRAME instead of using read_register.
(cris_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to find_step_target.

* mips-tdep.c (mips32_next_pc): Add FRAME argument.  Read registers
from FRAME instead of using read_register / read_signed_register.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(mips_next_pc): Likewise.
(mips_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to mips_next_pc.  Use get_frame_pc instead of read_pc.
* mips-tdep.h (mips_software_single_step): Replace REGCACHE
argument by FRAME.

* rs6000-tdep.c (branch_dest): Add FRAME argument.  Use it instead
of current frame.  Read registers from FRAME.
(deal_with_atomic_sequence): Add FRAME argument.  Pass it to
branch_dest.  Use get_frame_pc instead of read_pc.
(rs6000_software_single_step): Likewise.
(bl_to_blrl_insn_p): Do not call branch_dest.
* rs6000-tdep.h (rs6000_software_single_step): Replace REGCACHE
argument by FRAME.

* sparc64-linux-tdep.c (sparc64_linux_step_trap): Add FRAME argument.
Read registers from FRAME instead of current regcache.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Likewise.
* sparcnbsd-tdep.c (sparcnbsd_step_trap): Likewise.
* sparc-tdep.c (sparc_address_from_register): Remove.
(sparc_analyze_control_transfer): Pass FRAME argument instead of
GDBARCH.  Pass FRAME to step_trap callback.
(sparc_step_trap): Add FRAME argument.
(space_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to sparc_analyze_control_transfer.  Read registers from FRAME instead
of calling sparc_address_from_register.
* sparc-tdep.h (struct gdbarch_tdep): Add FRAME argument to
step_trap callback.
(sparc_address_from_register): Remove prototype.
(sparc_software_single_step): Replace REGCACHE argument by FRAME.
(sparcnbsd_step_trap): Add FRAME argument.

* spu-tdep.c (spu_software_single_step): Replace REGCACHE argument
by FRAME.  Read registers from FRAME instead of REGCACHE.

17 years ago * arm-tdep.c (arm_print_float_info): Use register value from FRAME
Ulrich Weigand [Fri, 15 Jun 2007 22:34:13 +0000 (22:34 +0000)]
* arm-tdep.c (arm_print_float_info): Use register value from FRAME
instead of calling read_register.

* avr-tdep.c (avr_push_dummy_call): Write to REGCACHE instead of
calling write_register.

* hppa-tdep.c (hppa32_push_dummy_call): Write to REGCACHE instead of
calling write_register.

* ia64-tdep.c (find_func_descr): Add REGCACHE parameter.  Use it
instead of calling read_register.
(ia64_push_dummy_call): Update call to find_func_descr.  Use REGCACHE
instead of calling read_register and write_register.

* m32r-tdep.c (m32r_linux_supply_gregset): Use REGCACHE parameter
instead of current_regcache.

* mn10300-tdep.c (mn10300_push_dummy_call): Write to REGCACHE instead
of calling write_register.
* mn10300-linux-tdep.c (am33_supply_fpregset_method): Use REGCACHE
parameter instead of current_regcache.

* mips-tdep.c (mips2_fp_compat): Add FRAME parameter.  Use it
instead of calling read_register.
(mips_read_fp_register_double, mips_print_fp_register): Update calls.
(mips_eabi_push_dummy_call): Use REGCACHE instead of write_register.
(mips_n32n64_push_dummy_call): Likewise.
(mips_o32_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.

* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use REGCACHE
parameter instead of current_regcache.

* xtensa-tdep.c (xtensa_register_write_masked): Add REGCACHE parameter.
Use it instead of read_register and write_register.
(xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Update call.
(xtensa_pseudo_register_write): Likewise.
(xtensa_frame_cache): Use register values unwound from NEXT_FRAME
instead of calling read_register.
(xtensa_push_dummy_call): Update comment.

17 years ago * mips-tdep.c (mips16_scan_prologue): Replace read_next_frame_reg
Ulrich Weigand [Fri, 15 Jun 2007 22:32:02 +0000 (22:32 +0000)]
* mips-tdep.c (mips16_scan_prologue): Replace read_next_frame_reg
by frame_unwind_register_signed calls.
(mips32_scan_prologue): Likewise.  Skip analysis of alloca stack
frame allocations when called with NULL NEXT_FRAME parameter.
(read_next_frame_reg): Remove.

* sh-tdep.c (sh_analyze_prologue): Add FPSCR parameter.  Use it
instead of reading the FPSCR register.
(sh_frame_cache): Pass unwound FPSCR register value to
sh_analyze_prologue.
(sh_skip_prologue): Pass dummy FPSCR value to sh_analyze_prologue.

* v850-tdep.c (v850_analyze_prologue): Add CTBP parameter.  Use it
instead of reading the CTBP register.
(v850_frame_cache): Pass unwound CTBP register value to
v850_analyze_prologue.

17 years ago * sh-tdep.h (sh_show_regs): Add FRAME parameter.
Ulrich Weigand [Fri, 15 Jun 2007 22:31:01 +0000 (22:31 +0000)]
* sh-tdep.h (sh_show_regs): Add FRAME parameter.
* sh-tdep.c (sh_show_regs): Likewise.
(sh_show_regs_command): Pass current frame to sh_show_regs routine.
(sh_generic_show_regs): Add FRAME parameter.  Use register
values from that frame instead of calling read_register.
(sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs,
sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Likewise.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs,
sh64_show_regs): Likewise.

17 years ago * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Read from
Ulrich Weigand [Fri, 15 Jun 2007 22:29:52 +0000 (22:29 +0000)]
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Read from
current regcache instead of calling read_register.

17 years ago * mep-tdep.c (current_me_module): Read from current regcache
Ulrich Weigand [Fri, 15 Jun 2007 22:28:52 +0000 (22:28 +0000)]
* mep-tdep.c (current_me_module): Read from current regcache
instead of calling read_register.
(current_options): Likewise.

17 years ago * cris-tdep.c (cris_stopped_data_address): Read register values
Ulrich Weigand [Fri, 15 Jun 2007 22:27:53 +0000 (22:27 +0000)]
* cris-tdep.c (cris_stopped_data_address): Read register values
from current frame instead of calling read_register.
* frv-tdep.c (frv_stopped_data_address): Likewise.

17 years ago * solib-sunos.c (sunos_solib_create_inferior_hook): Use write_pc
Ulrich Weigand [Fri, 15 Jun 2007 22:26:50 +0000 (22:26 +0000)]
* solib-sunos.c (sunos_solib_create_inferior_hook): Use write_pc
instead of write_register (PC_REGNUM, ...).

17 years ago * solib-sunos.c (sunos_solib_create_inferior_hook): Add comment
Ulrich Weigand [Fri, 15 Jun 2007 22:10:48 +0000 (22:10 +0000)]
* solib-sunos.c (sunos_solib_create_inferior_hook): Add comment
explaining why the PC adjustment code is necessary.

17 years ago * m68k-tdep.h (enum m68k_flavour): New.
Vladimir Prus [Fri, 15 Jun 2007 20:19:17 +0000 (20:19 +0000)]
* m68k-tdep.h (enum m68k_flavour): New.
(struct gdbarch_tdep): New fields
float_return, flavour and fpregs_present.
* m68k-tdep.c (m68k_register_type): Use
fpregs_present and conditionalize floating
registers type on flavour.
(m68k_register_names): New.
(m68k_register_name): Use the above.
(m68k_convert_register_p): Consult fpregs_present.
(m68k_register_to_value, m68k_value_to_register):
Use register_type to obtain the type of floating
point registers.
(m68k_svr4_extract_return_value): Check tdep->float_return.
Use register_type to get the type of floating
point regiters.
(m68k_svr4_store_return_value): Likewise.
(m68k_dwarf_reg_to_regnum): Check tdep->fpregs_present.
(m68k_analyze_register_saves): Likewise.
(m68k_gdbarch_init): Extract infromation
from XML description, if present.  Guess coldfire by
looking at the file, if present. Conditionalize
setting of long double format.  Set decr_pc_after_break
to 2 on coldfire and fido.  Enable XML-driven
register description.
* m68kbsd-tdep.c (m68kbsd_fpreg_offset): Use
size of tdep->fpreg_type, as opposed to hardcoded value.
* Makefile.in (m68k-tdep.o): Update dependencies.

17 years ago * NEWS: Mention "info spu" commands and qXfer:spu:read and
Ulrich Weigand [Fri, 15 Jun 2007 12:40:46 +0000 (12:40 +0000)]
* NEWS: Mention "info spu" commands and qXfer:spu:read and
qXfer:spu:write remote packet types.

17 years agodaily update
Alan Modra [Fri, 15 Jun 2007 00:00:06 +0000 (00:00 +0000)]
daily update

17 years ago*** empty log message ***
gdbadmin [Fri, 15 Jun 2007 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***

17 years ago2007-06-14 Paul Brook <paul@codesourcery.com>
Paul Brook [Thu, 14 Jun 2007 22:06:19 +0000 (22:06 +0000)]
2007-06-14  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
narrow shift by immediate.

gas/testsuite/
* gas/arm/thumb32.s: Add tests for shift instructions.
* gas/arm/thumb32.d: Ditto.

17 years agobfd/
H.J. Lu [Thu, 14 Jun 2007 15:31:01 +0000 (15:31 +0000)]
bfd/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I . -I ../config.

* acinclude.m4: Don't include m4 files. Remove libtool
kludge.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

binutils/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

gas/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Don't include m4 files.
(BFD_BINARY_FOPEN): Removed.
Remove libtool kludge.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

gprof/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

ld/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

opcodes/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

17 years ago2007-06-14 Paolo Bonzini <bonzini@gnu.org>
Paolo Bonzini [Thu, 14 Jun 2007 14:41:46 +0000 (14:41 +0000)]
2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

* configure.ac: Use ACX_PROG_CC_ALMOST_PEDANTIC too.
* configure: Regenerate.

17 years agoUpdate.
Alan Modra [Thu, 14 Jun 2007 08:53:09 +0000 (08:53 +0000)]
Update.

17 years ago2007-06-14 Paolo Bonzini <bonzini@gnu.org>
Paolo Bonzini [Thu, 14 Jun 2007 08:52:42 +0000 (08:52 +0000)]
2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.tpl (cleanstrap): Don't delete the toplevel Makefile.
        (distclean-stage[+id+]): Possibly delete stage_last.
        * Makefile.in: Regenerate.