git.libre-soc.org Git - buildroot.git/log

configs: rename Zynq defconfig files

These three are Zynq boards and the build procedure is almost the
same.  Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.

This commit renames as follows:

   zedboard_defconfig     -> zynq_zed_defconfig
   microzed_defconfig     -> zynq_microzed_defconfig
   xilinx_zc706_defconfig -> zynq_zc706_defconfig

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdrm: add vc4 (Raspberry Pi) option

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

norm: fix build failure with old headers

The version check for the nfq_get_payload prototype is wrong since it's
done against linux headers when in fact it changed with the 1.0.0
release of libnetfilter_queue, leading to build failure in toolchains
that have old headers when libnetfilter_queue is present. Fixes:
http://autobuild.buildroot.net/results/c0e/c0e897a6db888d4a7e0302cdc1e0cbec7d1e88f3/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: needs gcc >= 4.8

Uses C++11, fixes:
http://autobuild.buildroot.net/results/4a9/4a9999555c20e495d4981deafc2960940e67febe/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/systemd: Respect BR2_TARGET_GENERIC_GETTY_BAUDRATE

Currently systemd getty services ignore baudrates set in buildroot in
favour of a hardcoded 115200. This patch SEDs out that hardcoded value with
what is selected.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: enable linuxthreads for xtensa

linuxthreads is the only threading option for noMMU xtensa, enable it.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: add xtensa uClinux support

Backported from: r228450
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: bump to version 1.7.4

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: fix build with nothread toolchains

>From upstream changelog:
> If LWS_MAX_SMP=1, then there is no code related to pthreads compiled in the
library. If more than 1, a small amount of pthread mutex code is built into
the library.

Set LWS_MAX_SMP=1 for toolchains without thread support, otherwise leave it
unset so upstreams CMakeLists.txt will take care of it.

Fixes:
http://autobuild.buildroot.net/results/dbf/dbf45a52b9aef602fd62ad1ca10957bafe656923/
http://autobuild.buildroot.net/results/26c/26c2ac28f44f8f1b227caa715af60bcd92a5f740/
http://autobuild.buildroot.net/results/d65/d65dcbfb96b249e01b034c01a52884b522c778b3/
http://autobuild.buildroot.net/results/e55/e550ebfdd1e8f459ca7b12f2708a704eaec52474/
.. and more.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libwebsockets: add patch to fix musl build

Add patch from upstream [1] to fix musl build:
fatal error: sys/cdefs.h: No such file or directory

Fixes:
http://autobuild.buildroot.net/results/564/564675be0d4fbfa113a0f2e52874e0dce2d5ba5e/
http://autobuild.buildroot.net/results/c41/c41d87c0cf22f3b88e5f80ad6bf5e81900603c1d/

Backported from: 9eec5e4470397632af035c429295a41b74bd0585

[1] https://github.com/warmcat/libwebsockets/commit/9eec5e4470397632af035c429295a41b74bd0585

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: fix getchar issue with uClibc and gcc <= 4.8.2

getchar() is defined as a macro in uClibc. This hits gcc bug 58952 [1] for all
gcc versions <= 4.8.2 and building boost/test fails:

./boost/test/impl/unit_test_main.ipp: In function 'int boost::unit_test::unit_test_main(boost::unit_test::init_unit_test_func, int, char**)':
./boost/test/impl/unit_test_main.ipp:194:18: error: expected unqualified-id before '(' token

To allow building boost/test with uClibc based toolchains with gcc <= 4.8.2 use
parenthesis for std::getchar.

Fixes:
http://autobuild.buildroot.net/results/506/506b3b1b4087318a4247456782ac9e4f128d5db6/
http://autobuild.buildroot.net/results/5f2/5f2a8fb5cb823160542ee721591867b34bd25de6/
http://autobuild.buildroot.net/results/e3e/e3e6002ac5b40f7f03d32ba9da99f6497f01b42f/
.. and more

Upstream status: Pending
https://github.com/boostorg/test/pull/97

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58952

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: bump version to 2.2.23

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nss: security bump to version 3.23

Fixes:
CVE-2016-1950 - Fixed a heap-based buffer overflow related to the
parsing of certain ASN.1 structures. An attacker could create a
specially-crafted certificate which, when parsed by NSS, would cause a
crash or execution of arbitrary code with the permissions of the user.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: add license info

Now that we use unbundled ffmpeg the licensing becomes much easier.
Relevant code is under ext/*, which according to COPYING and comments is
GPLv2+, except for ext/libswscale/gstffmpegscale.c which is LGPLv2+ -
however that's not built/used when using system ffmpeg.

The code under gst-libs/ is the bundled ffmpeg itself.

Tests are under LGPLv2+ as well but we don't build them since we
disabled gst-check support in the gstreamer1 package.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: switch to unbundled

It avoids the crazy in handling all of the ffmpeg options here as well,
and potentially avoids target code duplication, hence resulting in a
size reduction.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: extend help text as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cannelloni: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix license, it's GPLv2, not GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorriso: Add host variant

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

whois: bump to version 5.2.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nmap: bump to version 7.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: use wizard mode on first run

The format of the ACL database in tvheadend has changed, and generating
a default user is a little bit more involved than just dumping a file in
the correct locations: filenames are now md5sum (of something?) and the
usernames and passwords now have their own DB.

However, tvheadend has a wizard mode, where it is possible to configure
the basic features, of which creating an admin user.

We remove our canned ACL database, and change the startup script to
start in wizard mode on first run. We also switch to using our infra to
set the permissions.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: pass --cpu config option to bundled ffmpeg

Like the proper ffmpeg package does, fixes:
http://autobuild.buildroot.net/results/a46/a462dae8df2450bc0f72cbed6125e106454bde0f/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcl: enable postgresql support

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcl: enable mysql support

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcl: fix sqlite usage

- Remove the bundled sqlite unconditionally, as we always want to use
  the external sqlite.
- Remove the --with-system-sqlite option as is only valid for the
  bundled sqlite configure script which we will no longer use.
- Do not remove TDBC when BR2_PACKAGE_SQLITE is not selected as it may
  be used for other TDBC drivers such as MySQL or PostgreSQL.

Fixes:
  http://autobuild.buildroot.net/results/022/02296f8624d3406a63d3a179f53862f245c56dc1/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcl: switch to * instead of [0-9]

Those [0-9] expressions are needlessly complex, and they actually no
longer work now that sqlite3.11.0 is bundled internally (11 is two
digits, which was accounted for).

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aer-inject: new package

aer-inject allows to inject PCIE AER errors on the software level into
a running Linux kernel. This is intended for validation of the PCIE
driver error recovery handler and PCIE AER core handler.

Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
[Thomas:
- tweak commit log
- rewrap Config.in help text
- remove useless AER_INJECT_MAKE_OPTS variable, use
TARGET_CONFIGURE_OPTS directly
- add missing newline at end of .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: fix getent installation with Codescape MIPS toolchains

When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.

Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.

Fixes:

http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu: bump version to 2.5.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-m2crypto: remove

It only provided the host variant, which was only used by crda (no
longer necessary), and wasn't available as a host selection.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

crda: enable host-python3 build support

Add an upstream-submitted (but not accepted) patch in order to allow
crda to be built with python2 as well as python3.
This drops m2crypto usage (python2-only) in favour of pycrypto which can
be built against both major versions.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pycrypto: bump to version 2.6.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pycrypto: add host variant

Will be used by the crda python3-enabling patch.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle libxml2 dependency

It's used for JUnit XML output support.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle systemd dependency

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle webp dependency

It doesn't have an enable/disable switch so it's just the dependency.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle lcms dependecy

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle dbus dependency

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: drop --disable-xwayland-test

It's in the rpi backend block which makes no sense, and it depends on
xwayland being enabled which we currently don't support so remove it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: add weston-launch support

The weston-launch supplemental group is for users to be able to
use/launch weston.
For a full weston(-launch) experience users should be at least members
of weston-launch, video (for framebuffer permissions) and optionally
audio.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: handle optional libva support

It's used for the recorder.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: add DRM compoitor support

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: set default backend for fbdev

When it's enabled set the default weston backend to fbdev, otherwise the
drm backend is the default even though we are not building it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: add EGL support

Also drop simple-egl-clients from the rpi compositor since it's a
duplicate of the global one.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

powerpc-utils: bump to v1.3.1, change upstream location and license

This patch makes below changes to powerpc-utils package:
  - Update to latest upstream version (v1.3.1)
  - Update License (from CPL to GPLv2)
  - Update source link (from SF to github)
  - Disable librtas by default
  - Finally make necessary adjustment to compile the source
    (run autogen.sh before ./configure as we don't have configure in new tarball).

RTAS:
  This package contains few tools (like nvram, ppc64_cpu, etc) which are not
  dependent on RTAS support. Traditionally we always had RTAS support (at least
  on IBM Power system). But now a days we do have environments like PowerNV host
  where we do not have RTAS support. Instead we use OPAL for runtime service [1].
  Hence lets disable RTAS by default. If someone wants to build powerpc-utils
  with RTAS they can enable it.

[1] https://github.com/open-power/skiboot.git

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[Thomas: re-add hash file, fix license, it's GPLv2+, improve commit title.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linphone: alsa support in mediastreamer needs alsa_lib_mixer

Fixes
http://autobuild.buildroot.net/results/dd6/dd6cbff641028b25303c3b462e2058b56e53f1dd/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: NPTL thread implementation only available on MMU platforms

As indicated by the uClibc-ng source code, the NPTL thread
implementation is only available on MMU platforms, so we replicate
this dependency in Buildroot so that the appropriate thread
implementation is chosen by default on ARM noMMU.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: disable DOPIC on ARM FLAT

As explained by Waldemar, enabling DOPIC in uClibc will lead to the
creation of a Position Independent library. In turn, this will cause
elf2flt to generate a "Has-PIC-GOT" flat binary, which doesn't work on
ARM. In fact, elf2flt on ARM really expect to have non-PIC code as
input, so we must disable DOPIC in the uClibc configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: gcc >= 4.9 can build a thumb/thread uclibc

Older gcc were not capable of building a uClibc library, with threads
enabled, in Thumb1. However, the issues have been fixed since gcc 4.9,
so this commit narrows down the condition to just gcc 4.7 and 4.8.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: remove USE_BX handling

Now that uClibc is capable of figuring out by itself whether 'bx' can
be used or not, we can simplify the logic in Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add patches to simplify Thumb handling

This commit adds a number of patches to uClibc that radically
simplifies the Thumb handling. uClibc currently has three options that
you need to toggle on Thumb configurations depending on the specific
ARM CPU being targeted.

However, it turns out that none of those options are necessary:

- USE_BX can simply be guessed by looking at the ARM core being
   used. The bx instruction is available for all ARM cores >=
   ARMv4T. This is exactly what glibc is doing.

- USE_LDREXSTREX can also be guessed by looking at the ARM core being
   used: whenever you have Thumb2, ldrex/strex is available.

- COMPILE_IN_THUMB becomes useless, since all it does is passing
   -mthumb. But just like the uClibc config options to set
   --march=<foo> have been removed a long time ago, there's no need to
   -have an option to pass -mthumb.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gamin: fix build with musl

musl does not provide the non portable PTHREAD_MUTEX_RECURSIVE_NP. Add a patch
removing the assumption the PTHREAD_MUTEX_RECURSIVE_NP is available when
'linux' is defined.

Upstream had no new release since 2008, so there is no much hope of getting
this fix applied upstream.

Also, fix the pthread dependency comment. gamin code uses pthread directly.

Fixes:
http://autobuild.buildroot.net/results/3a9/3a9328f384fc648ae61316402a84eaffb175881b/
http://autobuild.buildroot.net/results/69d/69d2a93bc97ab0d70c3acb2f9c9f28612ea95871/
http://autobuild.buildroot.net/results/092/092ac7380beb8ce403a1a6fd8e4176e9234413a3/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump to version 3.12.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "package/freerdp: bump version"

This reverts commit dda26dc614b6f5ef9be67d2604bac39235322235.

Instead of bumping freerdp to a version which breaks gstreamer
detection we revert the latest bump for now.

Fixes
http://autobuild.buildroot.net/results/1ab/1abc713a58d21c71678aab9b21ac1cfac23684f5/
http://autobuild.buildroot.net/results/0ef/0efd39115a631c409eb809b38ab64604d1de99ca/
http://autobuild.buildroot.net/results/7aa/7aac3f970dd1fbc0d25f268f32844bec7e49f4af/
http://autobuild.buildroot.net/results/396/396401bd6eb5f95364a32456a274da185e081541/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linphone: port some stuff from mediastreamer

We need to add some dependencies formerly provided by the mediastreamer
package, also add --disable-video to make clear that our linphone
package lacks video support as stated in Config.in.

Fixes
http://autobuild.buildroot.net/results/45e/45e605de0488e9e961a536f4d232235c5282522b/
http://autobuild.buildroot.net/results/ed5/ed508ac3509be8c46670198da8eb0a2ba74835e6/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libass: bump version to 0.13.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcpreplay: fix static link with libpcap

The tcpreplay configure script does not look for static libpcap.a unless
dynamic link is disabled.

Fixes:
http://autobuild.buildroot.net/results/e7e/e7e7744ac0a22eded05f237e40b0cdaeec4ce005/
http://autobuild.buildroot.net/results/3e3/3e33a67965eb37471ec3303ee26f6a66a82383a2/
http://autobuild.buildroot.net/results/fff/fff0d6a814b765699cba803ececbc00d77e5d8fc/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mesa3d: enable DRI drivers for xorg-less configurations

mesa3d can in fact build the DRI infrastructure/drivers just fine
without lingering x11 libs around, it just needs libdrm & friends which
are already accounted for.

So make the libGL (full OpenGL) providing abilities dependant on x11
being present.

It serves it's purpose for EGL+GLES hardware acceleration, and can in
fact be built without them, but it's probably not very useful (still,
leave the option for people inclined to do so).

Simple test defconfig:

BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: fix build with libgcrypt enabled

When gcrypt support is enabled, we need to tell systemd where
libgpg-error is installed.

Fixes:

http://autobuild.buildroot.org/results/1fd6193ff33250565c95e53614f5aa7fc6f4581c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libldns: Fix build error with perl 5.10

Add more upstream commits to fix build errors with perl 5.10
introduced by the previous patch to fix build errors with perl 5.22.

Fixes
http://autobuild.buildroot.net/results/325/32519c6d4084f334b7fed9edfb8a8c68a1f840a8/
and many others.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: reformat patches as proper Git formatted patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libldns: replace patches with proper Git formatted patches

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

git: bump version to 2.8.0

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-kconfig: fix .config rule for silent mode

Ensure that each command line in the .config rule is prefixed by $$(Q)

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: wayland backend requires headers >= 3.17

As pointed by Thomas, fixes:
http://autobuild.buildroot.org/results/473/473fb2f416311ee8a8a8719e3fb3689d9226f451/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freescale-imx: add BR2_PACKAGE_FREESCALE_IMX_HAS_VPU config

Since the imx-vpu package build is skipped if the platform doesn't
have a VPU, libraries dependent on the package such as libimxvpuapi
can fail although the imx-vpu package build went "fine".

This patch therefore adds a BR2_PACKAGE_FREESCALE_IMX_HAS_VPU config
which is used in every package selecting imx-vpu directly or indrectly.

It fixes the following build errors:
http://autobuild.buildroot.net/results/892/8924b17f3aa5eba1a8016d84d4478ecb0a96b236/
http://autobuild.buildroot.net/results/86f/86fef2a30065d5bc0d7755706e9ca3332426834d/
http://autobuild.buildroot.net/results/b47/b47eb03e93e2f1af85caebb707f7b4667f7e3d74/
http://autobuild.buildroot.net/results/4c9/4c9b22b33533132fd9f88917cc341ae2c2e171a8/
http://autobuild.buildroot.net/results/a8b/a8b33bfd099d9b9cd383cc568ea70846eb13c34d/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linknx: select libcurl to fix autoreconf

linknx configure.ac uses the LIBCURL_CHECK_CONFIG macro that is only defined
in libcurl.m4 that is part of libcurl. Select libcurl for now to fix
autoreconf.

Fixes:
http://autobuild.buildroot.net/results/96e/96e9ae0df7ebb7ad3d748a6b518cc59570e0b995/
http://autobuild.buildroot.net/results/179/17971c9f8925ff8623a7d97aac8eda0c287a76c9/
http://autobuild.buildroot.net/results/2a8/2a8af93d6439b313b048ccac7b6cfecbb6baff55/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qwt: needs qt5 widgets/printsupport

Fixes [1]:

Project ERROR: Unknown module(s) in QT: printsupport

[1] http://autobuild.buildroot.net/results/b9a/b9adbc61922c89ad7a0e5dd13cd2ce3bde864ede

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: bump version to 2.02.148

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipmitool: Bump ipmitool to 1.8.16

New release fixes a number of bugs on AMI BMC firmware.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5tools: disable qdoc, which needs qtdeclarative

Fixes [1]:

Project ERROR: Unknown module(s) in QT: qmldevtools-private
Makefile:63: recipe for target 'sub-qdoc-qmake_all' failed

[1] http://autobuild.buildroot.net/results/b0a/b0a5641beae14ff79a9d5a628bb41957826eb623

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/live555: bump version to 2016.03.16

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Updated ffmpeg option name after upstream renamed it:
https://github.com/tvheadend/tvheadend/commit/1359effe28a0381b8c9cbd362d6e144fb87b00fc#diff-e2d5a00791bce9a01f99bc6fd613a39dR37

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dtv-scan-tables: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x265: bump version to 1.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x264: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: bump version

This version bump is needed to provide support for ffmpeg 3.0, added
Sep, 17th, 2015: https://github.com/FreeRDP/FreeRDP/pull/2895

Please note the we can not bump to a newer version of freerdp atm
because the next commit in the master branch

https://github.com/FreeRDP/FreeRDP/commit/8206ae440f905b123cb92c7abf8c861070ea8cd8

bumped the version number to 2.x which will provide freerdp2.pc instead
of freerdp.pc, this is incompatible with vlc atm:

http://git.videolan.org/?p=vlc/vlc-2.2.git;a=blob;f=configure.ac;h=bb5d1dde2ef9828b0ba92c62dbd1143f984f45f2;hb=HEAD#l1890

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/squeezelite: fix compilation with ffmpeg >= 2.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv3: bump version to 3.1.0

Removed patches applied upstream. This version bump is needed to
provide support for ffmpeg 3.0:
https://github.com/Itseez/opencv/commit/278747ba458c9097aa72bf664c7a8df96d3a56fa

Use BR2_PACKAGE_FFMPEG_AVRESAMPLE by default because OpenCV can use it
after
https://github.com/Itseez/opencv/commit/2b2e3ee93c6788b892b084cc04d0ead5ab75c197

Before this patch:
--     FFMPEG:                      YES
--       codec:                     YES (ver 57.24.103)
--       format:                    YES (ver 57.25.100)
--       util:                      YES (ver 55.17.103)
--       swscale:                   YES (ver 4.0.100)
--       resample:                  NO

After this patch:
--     FFMPEG:                      YES
--       codec:                     YES (ver 57.24.103)
--       format:                    YES (ver 57.25.100)
--       util:                      YES (ver 55.17.103)
--       swscale:                   YES (ver 4.0.100)
--       resample:                  YES (ver 3.0.0)

Disabled new options:
WITH_MATLAB, WITH_VA, WITH_VA_INTEL, DOWNLOAD_EXTERNAL_TEST_DATA

Removed obsolete option BUILD_opencv_hal

Removed options WITH_OPENGL & WITH_OPENMP from the "Disabled features"
block because they have their own ifeq-block later on.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: bump version to 2.4.12.3

Removed patches applied upstream:
https://github.com/Itseez/opencv/commit/ea50be0529c248961e1b66293f8a9e4b807294a6
https://github.com/Itseez/opencv/commit/2e393ab83362743ba1825ad4b31d4a2925c606b4
https://github.com/Itseez/opencv/commit/eceada586bbf18fc267e437522ec4f1f23ddc656

Added upstream patch to support ffmpeg 3.0.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linphone: add support for ffmpeg 3.0

Linphone 3.6 is incompatible with bumped mediastreamer and ortp
packages. Like Debian we use the bundled versions instead and add the
Debian patch series to support ffmpeg 3.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mediastreamer: bump version to 2.12.1

The version bump is needed to provide support for ffmpeg 3.0.

Removed 0001-misc-fixes.patch which previously provided patches to
support newer ffmpeg versions. This is not needed anymore after
this upstream commit:
https://github.com/BelledonneCommunications/mediastreamer2/commit/5e653bfe4c8ea27d09c80d91794f0178a454851e

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ortp: bump version to 0.25.0

This version bump is needed by mediastreamer 2.12.1, the mediastreamer
bump is needed to provide support for ffmpeg 3.0.

Removed srtp option after srtp support was removed from ortp:
https://github.com/BelledonneCommunications/ortp/commit/5e37fa55f1f15f5896d69156e64cdc95a1ff68bf

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdcadec: bump version to v0.2.0

This version bump is needed by ffmpeg 3.0:
http://git.videolan.org/?p=ffmpeg.git;a=blobdiff;f=configure;h=a30d831c97575858c760694f191b4efe71360301;hp=8cbd5e574979e1a9492754aa41fcff233ee8da33;hb=27ce53b52d0d5f2c1d59da13491b74fe73cde964;hpb=26a84e2dae4007628d30cae746822486076767ee

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: add support for ffmpeg 3.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/grub2: enable squashfs support by default

Size growth is minimal and generally a non-issue for x86-based
platforms.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu: enable modules for x86 and x86_64

It's useful for demo configs which have more features, like
automatically loaded (module) drivers.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libxslt: fix static build

Set --with-libxml-libs-prefix so libtool finds the correct dependencies for
libxml2.

Fixes:
http://autobuild.buildroot.net/results/3f8/3f8d876ed6cfe6e73a75fa8904ebdd3f6f0fe53c/

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-pam: install login.pam from here

Instead of installing login.pam (/etc/pam.d/login) from util-linux
conditionally do so unconditionally from linux-pam.
If busybox login is pam-enabled (linux-pam package enabled) it will be
required, otherwise it will lead to a system where login won't work, and
if util-linux is enabled it will supercede busybox login and will be
necesarry regardless.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtkmm3: bump to version 3.20.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

redis: use BR2_TOOLCHAIN_HAS_LIBATOMIC

It uses __atomic_fetch_add_4 so libatomic must be pulled in if
necessary. Fixes:
http://autobuild.buildroot.net/results/dfd/dfdfd77463b0ddd7016202372afcad7fb6fc9ce4/

[Peter: keep TARGET_CONFIGURE_OPTS]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gzip: bump to version 1.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pangomm: bump to version 2.40.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibmm: bump to version 2.48.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-m2crypto: bump version

And add stronger hash.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-m2crypto: bump to 0.23.0

[Peter: license is MIT, fix license file name / variable]
Signed-off-by: Nitin Mendiratta <nitin.mendiratta@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ti-gfx: needs ia32 libraries

The installer is a 32-bit executable, so we need the 32-bit libraries on
the host to be able to execute it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

owfs: add sysv init scripts

owserver is started unconditionally, but it needs the device(s) to
be specified at startup. Therefore a check for non-empty OWSERVER_ARGS
is added to the owserver start script.

owfs is started only if is built. It will connect to the owserver.
It will try to load the fuse module; if fuse is built-in or already
loaded, modprobe -q will fail silently. The filesystem will be mounted
on /dev/1wire, because it represents the 1-wire slave devices; also,
the bundled Debian init scripts mount it there. We have to create that
directory in the init script in case of devtmpfs, and we have to create
it in the rootfs for static /dev; for simplicity, just do both.

Users who want a setup without owserver need to remove the owserver
init script post-build and need to give appropriate defaults to owfs.

[Peter: fix mountpoint variable typo in S30owfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nodejs: bump version to 5.9.1

See https://nodejs.org/en/blog/release/v5.9.1/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cairo: enable opengl for cairo-gl

If OpenGL is enabled then enable cairo-gl.
However if GLESv2 is also present we must choose which implementation to
use.
Since normally OpenGL is more featured, has more dependencies and
wouldn't be present "by accident" it seems like the logical choice to
win over it.

This feature is useful for webkitgtk's accelerated 2d canvas.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk2: point to the proper cups-config

Otherwise it can pick up the distro cups-config if it's present, leading
to improper library usage/linkage. Fixes:
http://autobuild.buildroot.net/results/bf4/bf493977817a750427aae82e71a5257187bd7344/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>