Thomas Petazzoni [Sat, 17 Apr 2010 01:31:22 +0000 (03:31 +0200)]
documentation: update after TARGET_DEVICE_TABLE removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 17 Apr 2010 01:30:59 +0000 (03:30 +0200)]
cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 17 Apr 2010 01:26:16 +0000 (03:26 +0200)]
fs: change the way the device table is configured
Until now, the location of the device table was specified by a
variable in board Makefiles. Unfortunately, this variable is not
accessible from fs/common.mk, since the target/ code is included
*after* fs/common.mk.
Anyway, the general idea is to move away from these boards Makefile,
and provide configuration option for things like the device table
location.
Therefore, this patch adds a BR2_ROOTFS_DEVICE_TABLE option which
allows to specify which device table should be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 17 Apr 2010 01:25:05 +0000 (03:25 +0200)]
cramfs: fix installation
The installation procedure of cramfs was broken when
$(HOST_DIR)/usr/bin didn't exist (i.e, cramfsck was installed as
$(HOST_DIR)/usr/bin directly). Use install -D with a proper
destination argument to make it work.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Thu, 15 Apr 2010 14:26:15 +0000 (16:26 +0200)]
openssl: fix build without ipv6 support
Closes #1567
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thomas Brandstetter [Sun, 11 Apr 2010 08:26:24 +0000 (10:26 +0200)]
pciutils: convert to the generic-tools infrastructure
Signed-off-by: Thomas Brandstetter <thomas.brandstetter@me.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 15 Apr 2010 12:02:22 +0000 (14:02 +0200)]
mtd: host compilation needs host-zlib
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Will Wagner [Wed, 14 Apr 2010 22:24:26 +0000 (23:24 +0100)]
mtd: mkfs.jffs2 requires zlib to build
[Peter: lzo needed as well]
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Thu, 15 Apr 2010 11:51:33 +0000 (13:51 +0200)]
iso9660: menu.lst fixup after move to fs
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Will Wagner [Wed, 14 Apr 2010 21:41:56 +0000 (22:41 +0100)]
initramfs: trivial fix following move to fs
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Wed, 14 Apr 2010 18:41:15 +0000 (20:41 +0200)]
busybox: 1.16.1 dnsd / hwclock fixes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Paulius Zaleckas [Wed, 14 Apr 2010 12:31:02 +0000 (15:31 +0300)]
libdrm: enable/disable features according to driver selection
Also cleanup autotools symbols and add libatomic_ops dependency
for Intel part.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Paulius Zaleckas [Wed, 14 Apr 2010 12:30:52 +0000 (15:30 +0300)]
Add libatomic_ops 1.2 needed by libdrm Intel support
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Tue, 13 Apr 2010 19:50:46 +0000 (21:50 +0200)]
Merge branch 'autotools-conversion' of git://git.busybox.net/~tpetazzoni/git/buildroot
Thomas Petazzoni [Sat, 10 Apr 2010 19:59:42 +0000 (21:59 +0200)]
libid3tag: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 19:58:12 +0000 (21:58 +0200)]
libmad: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 19:54:59 +0000 (21:54 +0200)]
aumix: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 19:53:56 +0000 (21:53 +0200)]
madplay: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 19:50:22 +0000 (21:50 +0200)]
findutils: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:20:07 +0000 (19:20 +0200)]
ipkg: remove useless configure options
These options are part of the default set of options passed to
./configure by the AUTOTARGETS infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:18:57 +0000 (19:18 +0200)]
argus: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:11:47 +0000 (19:11 +0200)]
tar: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:11:03 +0000 (19:11 +0200)]
bison: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:07:48 +0000 (19:07 +0200)]
Remove incorrect 'dummy' example
Since the introduction of the AUTOTARGETS infrastructure, the dummy
example is no longer correct. Moreover, the documentation now contains
extensive details about how new packages should be added, either using
the GENTARGETS or the AUTOTARGETS infrastructures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:04:26 +0000 (19:04 +0200)]
libcgi: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:03:27 +0000 (19:03 +0200)]
libsysfs: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 17:01:15 +0000 (19:01 +0200)]
libraw1394: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:59:34 +0000 (18:59 +0200)]
libcgicc: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:58:28 +0000 (18:58 +0200)]
libosip2: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Mon, 12 Apr 2010 13:06:55 +0000 (15:06 +0200)]
patch: convert to the autotools infrastructure and bump version
Bumping the version from 2.5.9 to 2.6 allows to avoid adding a patch
(merged upstream) to fix patch's Makefile install target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:50:08 +0000 (18:50 +0200)]
smartmontools: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:48:53 +0000 (18:48 +0200)]
setserial: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:45:07 +0000 (18:45 +0200)]
udpcast: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:39:35 +0000 (18:39 +0200)]
x11vnc: cleanup useless config options
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 16:34:47 +0000 (18:34 +0200)]
vtun: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:53:23 +0000 (22:53 +0200)]
Update defconfigs after BR2_RECENT removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:52:53 +0000 (22:52 +0200)]
Remove the BR2_RECENT option
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:52:38 +0000 (22:52 +0200)]
Get rid of all usages of BR2_RECENT
Since BR2_RECENT was enabled by default, we do not want entries marked
BR2_RECENT (and thus appearing by default in Buildroot) to disappear.
Therefore, all the entries marked BR2_RECENT are converted as
non-deprecated. We can later decide, on a per-entry basis, to add
BR2_DEPRECATED to some of them. But at least, this commit doesn't
change the default current behaviour of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:50:45 +0000 (23:50 +0200)]
Get rid of the OPTIMIZE_FOR_CPU variable
This variable, together with the FIXME comment, has been added has
part of Eric Andersen's « Major buildroot facelift, step one » commit
that occured in October 2004.
Since then, no real usage has been made of OPTIMIZE_FOR_CPU, and the
initial intention has probably been lost in the memories of the
implementors.
Therefore, get rid of the variable, and just use $(ARCH) at the two
locations the variable was used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:46:54 +0000 (23:46 +0200)]
Get rid of useless OpenMP related code
It seems that there was an intention to add BR2_ENABLE_OPENMP someday,
but it was in June 2007 (commit
c81807a9d71fba9f35eeb7e3f3b56bda4b2e0edd) and since then, nothing
occured. Therefore, get rid of this code, and just pass
--disable-openmp to gettext to keep the current behaviour.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:44:11 +0000 (23:44 +0200)]
Remove variables useless after BR2_PREFER_IMA removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:42:02 +0000 (23:42 +0200)]
Get rid of unused variables
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:39:14 +0000 (23:39 +0200)]
Update defconfigs after BR2_ENABLE_LOCALE_PREGENERATED removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:37:18 +0000 (23:37 +0200)]
Remove BR2_ENABLE_LOCALE_PREGENERATED
The option is marked broken since october 2009, and even the uClibc
configuration help text says that using pregenerated locales is highly
discouraged.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:19:24 +0000 (23:19 +0200)]
Get rid of now unused HOST_ARCH computation code
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:18:41 +0000 (23:18 +0200)]
Update defconfigs after BR2_GNU_BUILD_SUFFIX removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 21:17:25 +0000 (23:17 +0200)]
Guess build system and remove BR2_GNU_BUILD_SUFFIX
Instead of having a configuration option BR2_GNU_BUILD_SUFFIX, let's
use config.guess to guess the build system type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:56:52 +0000 (22:56 +0200)]
Move the global config cache option to an Advanced submenu
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:55:38 +0000 (22:55 +0200)]
Bring the three path-related options together
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:55:01 +0000 (22:55 +0200)]
Move the command-related options to a submenu
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:48:23 +0000 (22:48 +0200)]
Update defconfigs after BR2_HAVE_{INFOPAGES,MANPAGES} removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:47:28 +0000 (22:47 +0200)]
Get rid of BR2_HAVE_{MANPAGES,INFOPAGES} config options
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:47:05 +0000 (22:47 +0200)]
Use BR2_HAVE_DOCUMENTATION instead of BR2_HAVE_{MANPAGES,INFOPAGES}
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:44:37 +0000 (22:44 +0200)]
Do not remove documentation on a per-package basis
Since the documentation cleanup is done by the main Makefile in a
global way, there's no need to do that on a per-package basis in the
generic package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:42:45 +0000 (22:42 +0200)]
Remove all documentation when BR2_HAVE_DOCUMENTATION is not set
Until now, we had BR2_HAVE_MANPAGES, BR2_HAVE_INFOPAGES and
BR2_HAVE_DOCUMENTATION, but there's no need to have such a
fine-grained control over what documentation gets kept or not.
Therefore, just remove all the documentation (man pages, info pages
and documentation in $(TARGET_DIR)/usr/doc and
$(TARGET_DIR)/usr/share/doc) when BR2_HAVE_DOCUMENTATION is not set.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:39:53 +0000 (22:39 +0200)]
Do not let packages remove man pages, info pages and documentation
The cleanup of $(TARGET_DIR)/usr/share/man, $(TARGET_DIR)/usr/man,
$(TARGET_DIR)/usr/share/info, $(TARGET_DIR)/usr/info,
$(TARGET_DIR)/usr/share/doc and $(TARGET_DIR)/usr/doc is already done
globally in the main Makefile. Therefore, there's no need to handle
that on a per-package basis.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:21:54 +0000 (22:21 +0200)]
Update defconfigs after BR2_UPDATE_CONFIG removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:18:28 +0000 (22:18 +0200)]
Update config.{guess,sub} unconditionally
Remove the BR2_UPDATE_CONFIG option which allowed to globally
enable/disable the replacement of config.{guess,sub} for
autotools-based packages. Doing it unconditionnally just works.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:15:46 +0000 (22:15 +0200)]
Update defconfig after BR2_PREFER_IMA removal
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Sat, 10 Apr 2010 20:14:39 +0000 (22:14 +0200)]
Remove BR2_PREFER_IMA
This option is barely used, no-one is maintaining it or extending
it. So let's remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Fri, 9 Apr 2010 14:19:13 +0000 (16:19 +0200)]
cramfs: fix help text typo
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Peter Korsgaard [Fri, 9 Apr 2010 14:17:57 +0000 (16:17 +0200)]
Merge branch 'squashfs3' of git://git.busybox.net/~tpetazzoni/git/buildroot
Peter Korsgaard [Fri, 9 Apr 2010 14:16:44 +0000 (16:16 +0200)]
Merge branch 'fs-cleanup' of git://git.busybox.net/~tpetazzoni/git/buildroot
Thomas Petazzoni [Fri, 9 Apr 2010 10:15:59 +0000 (12:15 +0200)]
Add version selection for the SquashFS root filesystem
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 9 Apr 2010 10:15:25 +0000 (12:15 +0200)]
squashfs3: new package
Add support for the old squashfs 3.x tools, so that squashfs 3.x root
filesystems can be generated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 22:05:14 +0000 (23:05 +0100)]
fs/*/Config.in: remove useless configuration comments
The dependency on gzip, bzip2 and lzma are properly handled
automatically. No need to tell the user about this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:56:06 +0000 (22:56 +0100)]
Update defconfigs after fs cleanup
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:31:32 +0000 (22:31 +0100)]
Coherent naming for .mk files in fs/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:30:06 +0000 (22:30 +0100)]
Move all filesystem generation code to fs/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:13:47 +0000 (22:13 +0100)]
Remove IMAGE and related configuration options
Now, we just hardcode the image filenames to be rootfs.$(FSTYPE), in
the $(BINARIES_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:12:24 +0000 (22:12 +0100)]
iso9660: rework in a similar way to ROOTFS_TARGET
Unfortunately, it cannot use the ROOTFS_TARGET infrastructure, due to
the specifities of the iso9660 build process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:11:21 +0000 (22:11 +0100)]
target/common: do not use IMAGE
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Wed, 10 Mar 2010 21:10:23 +0000 (22:10 +0100)]
busybox initramfs: do not use the IMAGE variable
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:23:58 +0000 (00:23 +0100)]
initramfs: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:16:30 +0000 (00:16 +0100)]
ubifs: convert to ROOTFS_TARGET infrastructure
We also remove the BR2_TARGET_ROOTFS_UBIFS_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:16:01 +0000 (00:16 +0100)]
jffs2: convert to ROOTFS_TARGET infrastructure
We also remove the BR2_TARGET_ROOTFS_JFFS2_OUTPUT option, that could
be used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:15:15 +0000 (00:15 +0100)]
ext2: convert to ROOTFS_TARGET infrastructure
We also remove the BR2_TARGET_ROOTFS_EXT2_OUTPUT option, that could be
used to specify an alternate name for the generated image file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:14:29 +0000 (00:14 +0100)]
squashfs: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:14:16 +0000 (00:14 +0100)]
tar: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:14:06 +0000 (00:14 +0100)]
romfs: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:13:39 +0000 (00:13 +0100)]
cramfs: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:13:24 +0000 (00:13 +0100)]
cpio: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:13:12 +0000 (00:13 +0100)]
cloop: convert to ROOTFS_TARGET infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 9 Mar 2010 23:11:58 +0000 (00:11 +0100)]
target: Add new infrastructure for filesystem generation
In order to avoid code duplication between the different filesystem
generation makefile, we introduce a ROOTFS_TARGET macro. Documentation
for this macro is contained in the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 22:10:49 +0000 (23:10 +0100)]
target/: remove the COPYTO mess
There's no need to provide options to copy the filesystem image after
the build. Just use 'cp' outside of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:57:58 +0000 (22:57 +0100)]
fakeroot: remove all references to BR2_HOST_FAKEROOT
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:56:33 +0000 (22:56 +0100)]
fakeroot: convert to the autotools infrastructure
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:45:43 +0000 (22:45 +0100)]
target/ubifs: cleanup, unbroken
Use package/mtd to build the host mtd-utils, which contains
mkfs.ubifs. Remove dependency on BR2_HOST_FAKEROOT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:45:15 +0000 (22:45 +0100)]
target/tar: cleanup
Remove dependency on BR2_HOST_FAKEROOT.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:43:50 +0000 (22:43 +0100)]
target/squashfs: cleanup, remove support for 3.x
Remove the code to build squashfs-tools for the host, since they can
now be built using package/squashfs.
We also remove support for Squashfs 3.x, because the Squashfs driver
merged inside the mainline kernel is a 4.x driver. So 3.x is only
useful for old kernels using a Squashfs patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:43:21 +0000 (22:43 +0100)]
target/romfs: cleanup
Remove the code needed to build host genromfs, since it can now be
done using package/genromfs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:43:01 +0000 (22:43 +0100)]
target/jffs2: cleanup
Remove the code to build host MTD utils, since they can now be built
using package/mtd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:42:20 +0000 (22:42 +0100)]
target/iso9660: cleanup
Remove the mkisofs host tools building process, which is now in
package/cdrkit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:41:26 +0000 (22:41 +0100)]
target/ext2: cleanup
Remove the genext2fs host tools building process, which is now in
package/genext2fs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:40:45 +0000 (22:40 +0100)]
target/cramfs: cleanup
Remove the cramfs host tools building process, which is now in
package/cramfs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:39:25 +0000 (22:39 +0100)]
target/cpio: cleanup
* Remove the dependency on BR2_HOST_FAKEROOT, since we don't have
config option for host tools.
* Remove a few useless things.
* Check that cpio is available on the host in
toolchain/dependencies/dependencies.sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:38:04 +0000 (22:38 +0100)]
target/cloop: cleanup
Remove the code to build the cloop utilities for the host (it is now
in package/cloop).
Use fakeroot instead of ugly sudo. The cloop filesystem generation
code is now much more similar to other filesystems code.
Remove empty Makefile.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:36:43 +0000 (22:36 +0100)]
lzma: convert the host package to the autotools infrastructure
Note that we loose the ability to use a lzma command available on the
host and we now always build your own if a package needs it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:35:44 +0000 (22:35 +0100)]
cloop: new package
Only the host variant is supported, which explains why there is no
Config.in file. Will be used by the filesystem generation code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 2 Mar 2010 21:34:58 +0000 (22:34 +0100)]
mtd: convert to gentargets, add host package
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log