nmap: bump to version 7.70

Drop libssh2 configure test fix; the issue is fixed upstream.

Add license file hash.

Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

zsh: bump to version 5.5

We now have tar.xz archive again, use that.

Cc: Phil Eichinger <phil.eichinger@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

openssh: bump to version 7.7p1

Drop upstream patches, renumber the rest.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx-mkimage: bump to version rel_imx_4.9.51_8mq_ga

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

download/git: more resilient in case of kill

In case the git backend gets killed right in-between it finished
initialising the repository, but before it could add the remote,
we'd end up with a repository without the 'origin' remote, so we
would not be able to change its URL.

Another case that may happen (like in the build failure, below),
is that the repository was initialised with a previous version
of Buildroot, before the commit e17719264b (download/git: don't
require too-recent git) was applied, and that trepository was
still lying around...

Fixes:
    http://autobuild.buildroot.org/results/25a/25aae054634368fadb265b97ebe4dda809deff6f/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cryptopp: bump to version 7.0.0

Remove patch (applied upstream)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libglib2: fix license

libglib2 is licensed under LGPL-2.1+ and not LGPL-2.0+ since release
2.53.3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcap-ng: add hash for license files

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself for libcap-ng

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-headers: bump 4.16.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump default to version 4.16.1

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

freescale-imx: add config option for i.MX8M

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

imx-mkimage: new package

This package add support for imx-mkimage for iMX8M.
Currently the only hardware it's tested for.

Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flare-game: new package

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flare-engine: fix license

The license is GPL-3.0+, not GPL-3.0. Indeed all source files have the
mention:

"either version 3 of the License, or (at your option) any later version"

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flare-engine: new package

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/wandboard: bump to kernel 4.16

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself for zynq_zed

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/zynq_zed: linux: bump to latest mainline kernel

The Zynq SoCs are now well supported in the mainline kernel, thus stop
using the Xilinx fork.

As there is not xilinx_zynq defconfig in mainline, use the default
arch config.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump default to version 4.16

Added host-bison and host-flex as dependencies after upstream removed
pre-generated files and switched over to build-time generation, for
details see:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=033dba2ec06c47a9fe1b190bc3281058fb20738d
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=29c833061c1d8c2d1d23a62e7061561eadd76cdb

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux-headers: bump to 4.16 kernel version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: add 4.16.x choice for headers

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: add dependency on wchar

Extract from log:

output/build/llvm-5.0.1/include/llvm/Support/ConvertUTF.h:203:53:
error: ‘std::wstring’ has not been declared
bool ConvertUTF8toWide(llvm::StringRef Source, std::wstring &Result);

Also propagate dependency to mesa3d

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: add dependency on shared libraries

llvm generates libLLVM.so, so it won't work if BR2_STATIC_LIBS is set

Also propagate llvm dependency to mesa3d.

Link to report from autobuilders:
http://lists.busybox.net/pipermail/buildroot/2018-April/218296.html

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Makefile: avoid executing 'git log' each time SOURCE_DATE_EPOCH is used

If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.

This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

patch: add upstream security fix

Fixes CVE-2018-1000156: arbitrary command execution in ed-style patches.

Depend on MMU for now, because the patch adds a fork() call. Upstream
later switched to gnulib provided execute(), so this dependency can be
dropped on the next version bump.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/cramfs: add xip option

Cramfs now has the ability to XIP all ELF files.

Cc: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cramfs: change to new site location

As of Linux-4.15, cramfs now has a official maintainer again.
Additionally, that person is hosting and maintaining a new version of
cramfs-tools.

Patches 0001-endian.patch and 0003-fix-missing-types.patch are no longer
needed because they have been upstreamed.

However, since patch 0002-cygwin_IO.patch is so old, it is being
removed until someone that needs it can reapply and test it. At
that point, they should submit the changes to the new cramfs-tools
maintainer instead of adding the patches back here.

Please note that cross-endian support for cramfsck is not supported
at this time.

Cc: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

uclibc: simplify UCLIBC_EXTRA_CFLAGS

Since commit f66952197b41452b77dfa065adc7172137e4c243 ("package/gcc:
remove gcc 4.8"), UCLIBC_EXTRA_CFLAGS no longer exists, and is
therefore always empty.

Passing the Buildroot make variable UCLIBC_EXTRA_CFLAGS into the
UCLIBC_EXTRA_CFLAGS fed into uClibc's make environment therefore no
longer makes sense. Therefore, just pass $(TARGET_ABI).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gcc: fix HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI typos

The HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI variable was incorrectly
used as HOST_GCC_COMMON_WRAPPER_TARGET_FLOATABI_, which would always
be empty.

In practice, this block of code is only used on Blackfin (which has
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS unset) and Blackfin doesn't use
float-abi, so this block of code is in fact useless. But even if it's
useless, it's better to have it without typos.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5base: remove use of QT5BASE_EXTRA_CFLAGS

This variable was added as part of an EGL i.MX6 workaround in commit
(7e9f459adf), but appears to currently be abandonded and unused.  Remove the use
of the variable.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libbsd: add upstream patch to fix musl build issue

Commit d879be3049598f35d7b959784e1a6c2811ba2036 enabled the build for non-glibc
toolchains and added a  patch from upstream to fix one remaining build issue
with musl.

The upstream patch defines the glibc specific macro `__GLIBC_PREREQ` in
`include/bsd/sys/cdefs.h`, but the patch does not include this header
file in `include/bsd/stdlib.h` which uses the macro.

Upstream did committed an earlier patch which adds this header inclusion
to `include/bsd/stdlib.h`. So, add this upstream patch as well to fix a
build error when building the hcitop tool from the not yet added package
bluez-alsa.

Note, that the upstream patch address the issue that `<sys/cdefs.h>` is
a non-portable header. However, this is not the issue which needs to be
fixed by this patch, but solely the needed inclusion of the
`include/bsd/stdlib.h` header file, to see the definition of
`__GLIBC_PREREQ`.

Backported from: 11ec8f1e5dfa1c10e0c9fb94879b6f5b96ba52dd

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

php: fix emalloc/efree/estrdup/... undefined references

zend_alloc.h defines some macros such as:

Where _estrdup is the actual function implemented by the PHP core. If
this header file is not included, and some code uses estrdup, one ends
up with an undefined reference. This happens when libexpat support is
enabled. This commit adds a PHP patch that fixes this issue. The patch
has been submitted upstream through a Github pull request.

Fixes:

  http://autobuild.buildroot.net/results/889d2c1f509c035cd506e36061939bfddc8f1500/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/liblo: fix build with musl

Commit 2759ba03979 (liblo: disable werror to fix build issues) tried to
fix the issue by passing --disable-werror, but this is not a recognised
option.

Instead, just fix the code for good.

Fixes:
    http://autobuild.buildroot.org/results/000a46954d0c6d3dbc4b4634a0d3a3c955fac679
    http://autobuild.buildroot.org/results/58cb834bbd69bafc5cb0f23c236919c609648c05
    http://autobuild.buildroot.org/results/9de1c2007818082e88d77572abf8ff8a72e01930
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alex Baldwin <alexbaldwinmusic@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xen: fix qemu-xen memfd build failure

Fix the QEMU memfd compile error:
tools/qemu-xen/util/memfd.c:40:12: error: static declaration of 'memfd_create' follows non-static declaration
 static int memfd_create(const char *name, unsigned int flags)
            ^~~~~~~~~~~~

that has been introduced since the Glibc 2.27 upgrade.

This just involves porting the upstream QEMU patch to the Xen QEMU tree.

This fixes:
http://autobuild.buildroot.net/results/ec7cda00e07b0c98a9a366244b67611e042e0d4b/

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libglib2: bump to version 2.56.1

Remove patch (applied upstream)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-yieldfrom: fix licensing info

There is no file containing the license text. The closest we can use is
the PKG-INFO file, which contains the license name...

Fixes:
    http://autobuild.buildroot.net/results/dff21d63845d3d6a5f78c1000301cdd2104595f4
    http://autobuild.buildroot.net/results/220e82f555ce6c98b89605bab72c7ea3eea61c66
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kmod: fix host install

The host directory no longer uses /usr.

This currently works because we still have the  legacy /usr
symlink, but for correctness it is better that we just fix it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcap-ng: bump to version 0.7.9

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libcap: add license hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself for libglib2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wine: add optional dependency on libkrb5

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libmms: bump to version 0.6.4

Add license hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireshark: bump version to 2.2.14 (security)

Security fixes since 2.2.12:

- wnpa-sec-2018-15
  The MP4 dissector could crash. (Bug 13777)
- wnpa-sec-2018-16
  The ADB dissector could crash. (Bug 14460)
- wnpa-sec-2018-17
  The IEEE 802.15.4 dissector could crash. (Bug 14468)
- wnpa-sec-2018-18
  The NBAP dissector could crash. (Bug 14471)
- wnpa-sec-2018-19
  The VLAN dissector could crash. (Bug 14469)
- wnpa-sec-2018-20
  The LWAPP dissector could crash. (Bug 14467)
- wnpa-sec-2018-23
  The Kerberos dissector could crash. (Bug 14576)
- wnpa-sec-2018-05
  The IEEE 802.11 dissector could crash. Bug 14442, CVE-2018-7335
- wnpa-sec-2018-06
  Multiple dissectors could go into large infinite loops. All ASN.1 BER dissectors (Bug 14444), along with the DICOM (Bug 14411), DMP (Bug 14408), LLTD (Bug 14419), OpenFlow (Bug 14420), RELOAD (Bug 14445), RPCoRDMA (Bug 14449), RPKI-Router (Bug 14414), S7COMM (Bug 14423), SCCP (Bug 14413), Thread (Bug 14428), Thrift (Bug 14379), USB (Bug 14421), and WCCP (Bug 14412) dissectors were susceptible.
- wnpa-sec-2018-07
  The UMTS MAC dissector could crash. Bug 14339, CVE-2018-7334
- wnpa-sec-2018-09
  The FCP dissector could crash. Bug 14374, CVE-2018-7336
- wnpa-sec-2018-10
  The SIGCOMP dissector could crash. Bug 14398, CVE-2018-7320
- wnpa-sec-2018-11
  The pcapng file parser could crash. Bug 14403, CVE-2018-7420
- wnpa-sec-2018-12
  The IPMI dissector could crash. Bug 14409, CVE-2018-7417
- wnpa-sec-2018-13
  The SIGCOMP dissector could crash. Bug 14410, CVE-2018-7418
-  wnpa-sec-2018-14
  The NBAP disssector could crash. Bug 14443, CVE-2018-7419

Full release notes:

  https://www.wireshark.org/docs/relnotes/wireshark-2.2.14.html

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

download/git: don't require too-recent git

git has supported -C only since 1.8.5, and some distros have not yet
caught up after more than 4 years...

Fall back to entering the directory.

Fixes:
    http://autobuild.buildroot.net/results/35f9f7a4adc6c2cad741079e4afdf1408c94703b

Reported-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.15.16

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 14, 15}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

download/git: fix transform-name

When a package contains a relative symlink which first component is '..'
(thus pointing one directory higher), for example package 'meh' contains
this symlink:

    foo/bar -> ../buz

then it would be stored as 'meh-version./buz' because of the
transform-name pattern replacement.

Fix it to only match the leading './'.

Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zeromq: bump to version 4.2.5

Update the ZEROMQ_SITE with the active repository.
Remove the two patches because they were both applied on zeromq.
As a result, the ZEROMQ_AUTORECONF was removed.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libglib2: add upstream patch to fix build issue

Since the bump of libglib2 to 2.56.0, it fails to build on uClibc with:

gthreadedresolver.c: In function 'do_lookup_records':
gthreadedresolver.c:875:16: error: 'res' undeclared (first use in this function); did you mean '_res'?
   res_nclose (&res);
                ^~~
                _res

This commit adds an upstream patch that fixes this problem.

Fixes:

  http://autobuild.buildroot.net/results/990e19e3500986263f99354215e33214a2e89116/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

atmel: add support for at91sam9g20ek to flasher.sh

Adds support for the at91sam9g20-ek board to the flasher.sh script.

Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/at91sam9g20dfc: add ubifs target filesystem

This is a required component to complete the configuration. It also makes sense
to add ubifs so that this board can be flashed with the board/atmel/flasher.sh
script.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/atmel: add flasher.sh support for at91sam9260ek

Add support to the flasher.sh script for the at91sam9260-ek board which
complements the existing at91sam9260eknf_defconfig.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/strace: add missing libunwind optional dependency

This improve the reproducible build.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mention the libunwind dependency as being needed for 'strace
-k' in the Config.in help text, as suggested by Thomas De
Schampheleire.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libglib2: bump to 2.56.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

upmpdcli: bump to version 1.2.16

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libupnpp: bump to version 0.16.1

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add myself for rpi packages

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-wifi-firmware: change to LibreELEC github repo

Include brcmfmac43455 firmware for the rpi3 b+

Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Jens Maus <mail@jens-maus.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-bt-firmware: change to LibreELEC github repo

Include BCM4345C0.hcd for the rpi3 b+

Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rebase on master, use make foreach loop instead of shell for
loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: improve installation of dtb files

Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.

Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: use make foreach loop instead of shell for loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/raspberrypi: add support for rpi3 b+

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi*: bump kernel version

Now based on 4.14.29 (from 4.9.79)

Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: adjusted on top of Yann E. Morin changes to use a tarball
instead of a git clone.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: bump version

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

iqvlinux: remove package

This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.

See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
 - remove double "only" noticed by Carlos
 - fix typo packaged -> package noticed by Romain
 - fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/atmel: use correct sam-ba binary in flasher.sh script

Instead of using the install of sam-ba under host/opt directly, use the symlink
created in host/bin.  The side effect of doing this instead allows the correct
sam-ba binary to be used based on the host arch being 32 bit or 64 bit.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel: bump at91 defconfigs to at91bootstrap 3.8.10

Bump at91sam9260ek, at91sam9g20, at91sam9g45m10ek, and at91sam9rlek to
at91bootstrap 3.8.10.

at91bootstrap 3.8.10 is required to support gcc7.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel_sama5d3xek: bump to linux4sam_5.8

Bump sama5d3xek to linux4sam_5.8. The 3 foundation components have their tags
changed (AT91Bootstrap, U-Boot, Linux kernel).  This requires bumping the kernel
header version and u-boot dtc as well.

at91bootstrap 3.8.10 is required to support gcc7.

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

mesa3d: properly propagate the dependencies of BR2_PACKAGE_LLVM

We cannot simply select BR2_PACKAGE_LLVM, we need to take into account
all its dependencies. BR2_PACKAGE_LLVM_ARCH_SUPPORTS was already taken
into account, but not the other dependencies.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <a class="moz-txt-link-rfc2396E" href="mailto:thomas.petazzoni@bootlin.com">&lt;thomas.petazzoni@bootlin.com&gt;</a></pre>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

llvm: add dependency on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735

LLVM uses std::shared_future, which until gcc 7.x isn't available on
architectures that don't provide lock-free atomics, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64735.

Buildroot already has a BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option to
handle such a case, so simply add this new dependency to LLVM. It will
make sure LLVM doesn't get built on ARMv5 platforms using a gcc older
than 7.x.

Fixes:

  http://autobuild.buildroot.net/results/ada497f6a8d20fa1a9adb2b17a138d7b726a6cdc/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

php: fix how PCRE JIT is disabled

When the internal PCRE library of PHP is used, it tries to use a JIT
engine, which is only available on some architectures.

However, the mechanism used to disable JIT has changed in recent PHP
versions, and it now has a proper --without-pcre-jit option. Switch
over to that to properly disable JIT on unsupported platforms.

It has been tested to fix the build of PHP on ARC and Microblaze.

Fixes:

  http://autobuild.buildroot.net/results/e1359fcad7bc57e3c5a7ecc37abaa2cf6a6a9ffa/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

azure-iot-sdk-c: Bump to version 2018-03-16

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/download fix local backend

Since c8ef0c03b0b (download: put most of the infra in dl-wrapper), the
backend for local files is now named after the scheme, which is 'file'
for a local file.

>From the same commit on, the directory part and the basename are now
passed separately, to let the backend reconstruct the full path when it
needs to do so, which is the case for the 'file' backend too.

Finaly, ff559846fdc1 (support/download: Add support to pass options
directly to downloaders) introduced a nasty error, as it made use of
"${@}" when calling its internal function. Revert that mess now...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-yieldfrom: fix wrong package name in license

Fix the _LICENSE and _LICENSE_FILES variables, that were mistakenly
created with PYTHON_JSONMODELS instead of PYTHON_YIELDFROM

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

keepalived: add patch to disable PIE

PIE breaks the build on m68k and Microblaze, so let's add a patch that
disables using PIE by default in keepalived. Obviously, when we start
seriously testing the BR2_RELRO_FULL option, we will realize that it
is broken on some architectures, and will probably disable it on m68k
and Microblaze.

Fixes:

  http://autobuild.buildroot.net/results/a536f5947b3b70fdaecad1af5542572c504ad046/
  http://autobuild.buildroot.net/results/0ffbf1e8d181c9463847a5b2be6f9baa18face24/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

keepalived: bump to 1.4.2

We can drop 0001-Fix-build-with-Linux-kernel-headers-v4.15.patch as it
has been merged upstream, as of commit
https://github.com/acassen/keepalived/commit/a5457d3a1f579fef5825ffe841f1613b0014ff19.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-webpy: use webpy-0.39 tag

No functional change, but upstream has now tagged the release, so use the
tag instead of the sha1.

https://github.com/webpy/webpy/issues/449

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/bananapro: bump U-Boot to version 2018.03

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/bananapro: bump Linux to version 4.14.32

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: use SPDX short identifier for license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1-editing-services: use SPDX short identifier for license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kexec: allow selection on aarch64

kexec works fine on aarch64, so allow selecting it on that architecture.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-psycopg2: new package

Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

postgresql: propagate BR2_USE_MMU dependency to Config.in comment

The BR2_PACKAGE_POSTGRESQL option depends on BR2_USE_MMU, so the
Config.in comment about the dynamic library dependency should only be
displayed if the BR2_USE_MMU requirement is met.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

pkg-download.mk: do not add a trailing slash to <PKG>_SITE

Fixes
http://autobuild.buildroot.net/results/734/7342b25f01d60cafc4a5422a5a1c282629f361c5/

$(dir does not strip last path separator and the wget wrapper adds a '/'
between the -u argument and the filename when it reconstructs the URL,
leading us to have two slashes before the filename when accessing the
upstream location.

Most upstream servers ignores this, but not all - Leading to download issues
from pypi.

Notice: As pointed out by Arnout, we cannot simply use $(PKG)_SITE here as
_PATCH and _EXTRA_DOWNLOADS may contain full URLs.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

download/git: fix basename for files inside tarballs

Commit "6d938bcb52 download: git: introduce cache feature" introduced a
typo that makes the tarball to contain files without the package
basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0               8 2017-10-14 02:10 ./file

Historically, all tarballs are generated with the basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0               8 2017-10-14 02:10 good-a238b1dfcd825d47d834af3c5223417c8411d90d/file

The hashes in the tree were calculated with the basename.

In the most common scenario, after the download ends the tarball is
generated, the hash mismatches and the download mechanism falls back to
use the tarball from http://sources.buildroot.net .

The problem can be reproduced by forcing the download of any git package
PKG that has a hash file to check against:
$ make defconfig
$ ./utils/config --set-str BR2_BACKUP_SITE ""
$ BR2_DL_DIR=$(mktemp -d) make PKG-dirclean PKG-source

Fix the typo so the basename is really added to the files, that was
clearly the intention of the code.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: add support for sunxi-mali{,-mainline} eglfs backend

Only one of the two can be selected (they are conflicting virtual
packages) so testing against a single 'y' is enough.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: add sunxi-mali and sunxi-mali-mainline in a single patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qt5base: correct eglfs support in qmake.conf.in

Setting EGLFS_DEVICE_INTEGRATION at the end of qmake.conf like is done
by commit 0c219ddb8a doesn't work correctly: it has to be set before the
include(../common/linux_device_post.conf)

Instead of appending to the file, change it into a qmake.conf.in
template file that contains a placeholder for the
EGLFS_DEVICE_INTEGRATION assignment and update it with sed. Since the
sed always has to be executed, this removes the need for a separate
QT5BASE_CONFIGURE_QMAKE_CONFIG definition.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: simplify the replacement, move sunxi-mali support to a
 separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

postgresql: add version output to pg_config

Some external packages call pg_config to determine the installed PostgreSQL
version. Add this output to Buildroots own pg_config, so these packages
correctly compile.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

libuv: bump to version v1.20.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

tinycbor: bump to version 0.5.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-webpy: security bump to version 0.39

>From the changelog:

2018-02-28 0.39
* Fixed a security issue with the form module (tx Orange Tsai)
* Fixed a security issue with the db module (tx Adrián Brav and Orange Tsai)

2016-07-08 0.38
..
* Fixed a potential remote exeution risk in `reparam` (tx Adrián Brav)

License files are still not included on pypi, so continue to use the git
repo. Upstream has unfortunately not tagged 0.39, so use the latest commit
on the 0.39 branch.  A request to fix this has been submitted:

https://github.com/webpy/webpy/issues/449

0.39 now uses setuptools, so change the _SETUP_TYPE.

Add hashes for the license files.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-webpy: needs hashlib support in python

webpy uses hashlib for session handling, so ensure it is available:

web/session.py:    import hashlib
web/session.py:    sha1 = hashlib.sha1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wolfssl: bump version to 3.14.0

Add upstream post-3.14.0 patch to fix build issue related to missing fips.h
header.

For more details, see:
https://github.com/wolfSSL/wolfssl/issues/1415

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: enable llvm support

This patch provides LLVM support for Mesa3D, enabling llvmpipe
software rasterizer if Gallium swrast is selected.

In case Gallium r600 is selected, llvm AMDGPU backend is built.

Having llvm installed also enables radeonsi Gallium driver, but
it is not provided with this patch as it hasn't been tested.

It uses llvm-config (host variant) installed in STAGING_DIR/usr/bin
to get LLVM libraries. Assuming that LLVM version 5.0.1 is installed,
llvm-config --libs will output -lLLVM-5.0.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: enable AMDGPU

The AMDGPU backend provides ISA code generation for AMD GPU's,
starting with the R600 family up until the current GCN families.

It should not be confused with the AMDGPU Linux kernel DRM driver.

For more info: https://llvm.org/docs/AMDGPUUsage.html

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/llvm: new package

This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.

In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.

It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.

More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369

The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.

More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.

If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:

 - llvm-config --shared mode outputs static (even if LLVM is built as
   one shared library) which leads to link issues with libgallium.

 - llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
   -lLLVMPasses,etc instead of the single shared library containing
    all LLVM components (-lLLVM-5.0)

Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.

Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.

As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.

Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.

The main options needed to cross-compile LLVM are the following ones:

LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
 - add dependency on thread and C++ and update the Config.in comment
   accordingly.
 - make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
   so that it isn't disabled on architectures where LLVM is anyway not
   supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/pkg-stats: replace with new Python version

Rename pkg-stats-new to pkg-stats.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/pkg-stats-new: add current version information

This commit adds a new column in the HTML output containing the
current version of a package in Buildroot. As such, it isn't terribly
useful, but combined with the latest upstream version added in a
follow-up commit, it will become very useful.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/scripts/pkg-stats-new: add -n and -p options

This commit adds the following options to the pkg-stats-new script:

 -n, to specify a number of packages to parse instead of all packages

 -p, to specify a list of packages (comma-separated) to parse instead
     of all packages

These options are basically only useful when debugging/developing
this script, but they are very useful, because the script is rather
slow to run completely with all 2000+ packages, especially once
upstream versions will be fetched from release-monitoring.org.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>