git.libre-soc.org Git - buildroot.git/log

package/kvm-unit-tests: new package

The unit tests are tiny guest operating systems that generally execute
only tens of lines of C and assembler test code in order to obtain its
PASS/FAIL result. Unit tests provide KVM and virt hardware functional
testing by targeting the features through minimal implementations of
their use per the hardware specification. The simplicity of unit tests
make them easy to verify they are correct, easy to maintain, and easy
to use in timing measurements. Unit tests are also often used for
quick and dirty bug reproducers. The reproducers may then be kept as
regression tests. It's strongly encouraged that patches implementing
new KVM features are submitted with accompanying unit tests.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- order architecture dependencies in Config.in alphabetically.
- rewrap Config.in help text, lines were too long
- add an empty line between the package description and the upstream
   project URL in the Config.in help text
- don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not
   correct for i386 for example. Instead, just handle the few
   architectures that the package supports.
- remove useless double quotes in variable definitions.
- remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing
   everything in /share/ and not /usr/share/, and setting the prefix to
   TARGET_DIR at configure time is not good. Instead, pass DESTDIR at
   installation time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php: set MySQL socket path

Set the PHP default MySQL socket path to match what the
mysql package is using.

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mysql: add MYSQL_SOCKET variable

Add MYSQL_SOCKET variable with MySQL socket location

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi3: fix serial console (load pi3-miniuart-bt overlay)

- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig
- add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg
- enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request
- add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/cryptsetup: move depends on above select

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: do not use hg when available

During the execution of its configure script, Python 3 tries to find an
available "hg" installation, and if available, will try to use it to get
information from the version control system. To do this, it tries to
communicate over the network, potentially over ports that are blocked,
causing the build to halt. This was reported by a user as part of bug
7802.

To solve this, we simply make the Python script use /bin/false as the
"hg" program.

Fixes bug #7802 for the python3 package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: do not use hg or svn when available

During the execution of its configure script, Python tries to find an
available "hg" and "svn" installation, and if available, will try to use
them to get information from the version control system. To do this, it
tries to communicate over the network, potentially over ports that are
blocked, causing the build to halt. This was reported by a user as part
of bug #7802.

To solve this, we simply make the Python script use /bin/false as the
"hg" and "svn" programs.

Fixes bug #7802 for the python package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add defconfig for TS-4900

The TS-4900 uses a custom Linux 4.X from Technologic Systems:
https://github.com/embeddedarm/linux-3.10.17-imx6/tree/imx_4.1.15_1.0.0_ga
Indeed, it is not supported by mainline Linux but this work is ongoing.

This patch is inspired by a previous work for the TS-4800.
A post image script is provided to generate an image that can be
directly written to an SD card. It also adds an fpga wifi module.

Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ts4900-fpga: add ts4900-fpga package

This package is responsible from downloading and deploying bitstream for
TS-4900's FPGA. It implements clocks, UART MUX, and GPIOs. One of these
GPIOs is used to enable the wifi module.

It is loaded by U-Boot during the boot sequence, the default U-boot
script expects to find it in the /boot folder.

Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
[Thomas:
- Use "config" instead of "menuconfig" since there's a single option
   and no sub-options.
- Add BR2_arm dependency, since it's only used on a specific i.MX6
   platform.
- Implement TS4900_FPGA_EXTRACT_CMDS that copy the file to the package
   build directory $(@D)
- Change the install command to copy from $(@D) instead of from
   $(DL_DIR)
- Change the install command to remove the 'mkdir -p
   $(TARGET_DIR)/boot' and instead just use the -D option of the install
   program that creates the destination directory if it doesn't exist.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: add option for Marvell usb8801 firmware

Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: bump to 1.18.1

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-daemon: bump to version 2.1.1

Bump to the latest version, to get python3 support.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/wrapper: extend paranoid check to -isystem

Some packages, like libbsd, use -isystem flags to provide so-called
overrides to the system include files. In this particular case, this
is used in a .pc file, then used by antoher package; pkgconf does not
mangle this path; and eventually that other package ends up using
/usr/include/bsd to search for headers.

Our current toolchain wrapper is limited to looking for -I and -L, so
the paranoid check does not kick in.

Furthermore, as noticed by Arnout, there might be a bunch of other
so-unsafe options: -isysroot, -imultilib, -iquote, -idirafter, -iprefix,
-iwithprefix, -iwithprefixbefore; even -B and --sysroot are unsafe.

Extend the paranoid check to be able to check any arbitrary number of
potentially unsafe options:

- add a list of options to check for, each with their length,
- iterate over this list until we find a matching unsafe option.

Compared to previously, the list of options include -I and -L (which we
already had) extended with -idirafter, -iquote and -isystem, but leaving
all the others noticed by Arnout away, until we have a reason for
handling them.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/wrapper: display options leading to a paranoid failure

Current, we only display the path that causes the paranoid failure. This
is sufficient, as we can fail only for -I and -L options, and it is thus
easy to infer from the path, which option is the culprit.

However, we're soon to add a new test for the -isystem option, and then
when a failure occurs, we would not know whether it was because of -I or
-isystem. Being able to differentiate both can be hugely useful to
track down the root cause for the unsafe path.

Add two new arguments to the check_unsafe_path() function: one with the
current-or-previous argument, one to specify whether it has the path in
it or not. Print that in the error message, instead of just the path.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/systemd: fix build with old toolchains

Toolchains using glibc-2.18 or older do not define O_TMPFILE, which
causes build failures on some archs.

systemd has a definition for O_TMPFILE if it is missing, but only
defines it for i386 or x86_64. Furthermore, the header defining it is
not included everywhere O_TMPFILE is used.

Fix that with three patches backported from upstream:
  - include the needed header where it is needed (he!),
  - define O_TMPFILE for all archs, according to linux-4.8rc3,
  - no longer guard against undefined O_TMPFILE in fileio.

Upstream merge commit:
    https://github.com/systemd/systemd/commit/4a13100c6a5a0a4b793e90bd43d21c3696c42d46

Fixes:

  http://autobuild.buildroot.net/results/b0067e72ffcbbe1db9ef49ab297cece951345aeb/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

olimex_a20_olinuxino_lime: bump u-boot to 2016.09

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: Bump ARC tools to arc-2016.09-eng013

As described at:
4520524ba055706236db9f00dd79f1b2e2e87fde
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng013.

This engenering build contains some important GCC updatesthat fixes
some failures for ARC, such as:
http://autobuild.buildroot.net/results/f80/f80ad8a07d9d58b46592c2c99b227197b0f808d3//
http://autobuild.buildroot.net/results/e59/e59e6592fc697cceda359e421387dd905ff04701//
http://autobuild.buildroot.net/results/521/52157aa2b5d75b5338f3bde7ae5beb3d300283d3//

We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.

So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: allow to build multiple U-Boot images

Sometimes it is desired to build multiple U-boot images. E.g. one to
save into flash memory and one for serial load. So far this was not
possible.

This change allows to select any combination of the target formats. They
are all copied to the image folder.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
[Thomas:
- Handle the BR2_TARGET_UBOOT_FORMAT_BIN, which wasn't handled, and
   therefore u-boot.bin was not copied when
   BR2_TARGET_UBOOT_FORMAT_BIN=y.
- Rename UBOOT_BIN to UBOOT_BINS, since it can now contain multiple
   values.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: enable elput support

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- add --disable-elput in the !BR2_PACKAGE_EFL_ELPUT case
- add missing dependency on libxkbcomm]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/efl: add OpenGL/OpenGLES support

Allow to enable graphic acceleration using OpenGL or OpenGLES with efl
libraries.

The full OpenGL option depend on X11, because full OpenGL means GLX,
which means X11. Also select efl xlib support when full OpenGL is
selected.

Enable OpenGL ES when EGL API is enabled, otherwise the build fail with
this error:
configure: error: OpenGL ES requires EGL, please add --enable-egl to your configure options to switch to EGL + OpenGL ES.

With the upcomming Wayland support in EFL Buildroot packaging,
OpenGL ES support is recommended.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- use a single ifeq/else ifeq/else ifeq/endif block
- remove the "default" for the choice, move the "none" choice at the
   end, and simply rely on the first choice having its dependencies met
   being automatically enable by kconfig. So OpenGL first, then
   OpenGLES, and then none.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: distclean is a noconfig target

When the .config contains invalid configuration *(e.g. two providers for
a same virtual package), it is not possible to run "make distclean"
because the .config file is sourced and packages interpreted in this
case.

Add distclean to the noconfig list, so that we can run it in all cases.

However, this meand that DL_DIR is no longer set, and thus the default
download location never removed. We fix that by always removing the
download location, so that if it is the one configured we still remove
it (no change) and if it is not the one configured, we remove an
non-existing location and leave the user's location intact (no change
either).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core: don't build host-cmake if it is available on the build host

Currently all cmake packages depend on host-cmake. Unfortunately
host-cmake takes a long time to configure and build: almost 7 minutes
on a dual-core i5 with SSD. The time does not change even with ccache
enabled.

Indeed, building host-cmake is avoidable if it is already installed on
the build host: CMake is supposed to be quite portable, and the only
patch in Buildroot for the CMake package seems to only affect
target-cmake.

Thus we automatically skip building host-cmake and use the one on the
system if:
- cmake is available on the system and
- it is recent enough.

First, we leverage the existing infrastructure in
support/dependencies/dependencies.mk to find out whether there's a
suitable cmake executable on the system. Its path can be passed in the
BR2_CMAKE environment variable, otherwise it defaults to "cmake". If
it is enabled, found and suitable then we set BR2_CMAKE_HOST_DEPENDENCY
to empty; otherwise we set BR2_CMAKE_HOST_DEPENDENCY to 'host-cmake' and
override BR2_CMAKE with "$(HOST_DIR)/usr/bin/cmake" to revert to using
our own cmake (the old behaviour).

Then in pkg-cmake.mk we replace the hard-coded dependency on host-cmake
to using the BR2_CMAKE_HOST_DEPENDENCY variable, and we use $(BR2_CMAKE)
instead of $(HOST_DIR)/usr/bin/cmake.

Unlike what we do for host-tar and host-xzcat, for host-cmake we do
not add host-cmake to DEPENDENCIES_HOST_PREREQ. If we did, host-cmake
would be a dependency for _any_ package when it's not installed on the
host, even when no cmake package is selected.

Cmake versions older than 3.0 are affected by the bug described and
fixed in Buildroot in ef2c1970e4bf ("cmake: add patch to fix Qt mkspecs
detection"). The bug was fixed in upstream CMake in version 3.0 [0].

Amongst all the cmake packages currently in Buildroot, the currently
highest version mentioned in cmake_minimum_required() is 3.1 (grantlee
and opencv3).

Thus we use 3.1 as the lowest required cmake for now, until a package is
bumped, or a new package added, with a higher required version.

[0] https://cmake.org/gitweb?p=cmake.git;h=e8b8b37ef6fef094940d3384df5a1d421b9fa568

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr:
  - simplify logic in check-host-cmake.mk;
  - set and use BR2_CMAKE_HOST_DEPENDENCY, drop USE_SYSTEM_CMAKE;
  - bump to cmake 3.1 for grantlee and opencv;
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xen: remove -Werror when building host tools

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xvisor: new package

This new package provides Xvisor, an open-source type-1 hypervisor,
which aims at providing a monolithic, light-weight, portable, and
flexible virtualization solution.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- use MKIMAGE_ARCH instead of BR2_ARCH when calling mkimage
- use $(MKIMAGE)
- license is GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: update pkg-kconfig doc about <pkg>_KCONFIG_DOTCONFIG

Content provided by Yann E. Morin.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-kconfig: support alternative .config location

Kconfig clones, such as openconf used by xvisor [1], do not look for
.config at the root of the build directory, but in a subdirectory (e.g.
build/openconf).

This patch introduces a new Makefile variable named
$(2)_KCONFIG_DOTCONFIG, which contains the path to .config relative to
the source directory of the package. It defaults to .config and can be
overridden in the package Makefile.

It also creates the full directory hierarchy where the .config file is
stored, in case it does not exist (e.g. in xvisor).

This allows the use of the kconfig-package infrastructure with packages
relying on such clones.

[1] https://github.com/xvisor/xvisor/tree/master/tools/openconf

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use "install -D" instead of "mkdir + cp", as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

infra/pkg-kconfig: Be sure to reconfigure the package on foo-reconfigure

Currently, calling foo-reconfigure for a kconfig-based package will not
re-trigger the configuration (kconfig-wise) step for the package.

This can be problematic when using an override-srcdir suring development
and the content of the veride-srcdir changes (e.g. on a rebase, a merge,
or during a bisect).

This is because the configuration (kconfig-wise) of the package is not
done in the _CONFIGURE_CMDS block, but as a separate action that is not
part of any step [0].

So, be sure to remove the stamp file .stamp_kconfig_fixup_done during
the foo-clean-for-reconfigure rule, so that the configuration is applied
again with the new source tree.

We use another rule, foo-clean-kconfig-for-reconfigure, because we do
not want to override the default foo-clean-for-reconfigure rule, and we
have no way to add conditional commands to it.

[0] The reasons it was not done are not entirely clear in my head, but
IIRC that was not working at the time we tried with Thomas DS.

Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/autoconf-archive: bump to version 2016.03.20

Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: Disable build also for examples and tests

Fixes:

http://autobuild.buildroot.net/results/a11eab534b8642077705d891329c1fd40d394419

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 12.0.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: bump to 7.0.11

Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to fix include path of log

The "log.{h,hxx}" header files are included from libupnpp.

As we are using the pkg-config file of libupnpp to get the header
include path, instead of the hardcoded `{prefix}/include/libupnpp`
these files are not found.

Upstream-status: https://github.com/medoc92/upmpdcli/issues/46

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to use pkg-config for libupnpp

Building upmpdcli aborts because of an unsafe header inclusion of
`/usr/include/libupnpp`. Using `{prefix}` to get the header path is
wrong for cross-compilation.

Instead of hard-coding the flags for libupnpp use pkg-config to get the
correct ones.

Note that this patch adds the host-pkgconfig dependency unconditionally and
removes the necessity to pass the libupnpp manually to LIBS for a static
build.

Upstream-status: https://github.com/medoc92/upmpdcli/pull/49

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: add patch to fix jsoncpp detection

Although jsoncpp is present, the build system of upmpdcli does not detect it.

The default installation path for the header files of jsoncpp is
{prefix}/json, but some systems (Debian) prefers to install the headers
in {prefix}/jsoncpp/json.

The build system only checks for the header files in
{prefix}/jsoncpp/json, so jsoncpp is not found.

This patch from upstream handles both cases now when checking for the jsoncpp
library.

The patch is squashed of two commits from upstream:
1/ aba96db0cfe8a2e5c825f4448c0ad184e21b50e1
2/ ce144f19a8c2e8c1e0ec3fe53699e874e5eb43fe

Fixes:
http://autobuild.buildroot.net/results/5bc6c558fccea0e1e1936894ce372f2b7b8ecac2
http://autobuild.buildroot.net/results/9c2d3892f17c240c44f7255d821d66acbed361f0
http://autobuild.buildroot.net/results/4d22729535ca4e6acbb48a25145611bb49c10149
http://autobuild.buildroot.net/results/fda321774c3eb225f966dd9f83def5329b703a03
http://autobuild.buildroot.net/results/f5eb306b0032e830f7f72ce80e318aa11774a5d1

.. and many more!

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: fix missing dependencies

Starting with version 1.2 upmpdcli depends on libmicrohttpd and jsoncpp.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: requires GCC 4.7

upmpdcli now uses C++11 features, meaning the minimum usable GCC version
is 4.7.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: add patch to get pkg-config file

Apply a patch from upstream to install a pkg-config file for libupnpp.

Fetch from:
https://github.com/medoc92/libupnpp/commit/9f03bb0e7b47e2843edea6f25ed9eabbfb6412df

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: nitrogen*: enable VFP and NEON support

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: needs MMU support

iowatcher/main.c uses system() which uses fork().

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blktrace: add dependency on NPTL

blkiomon.c assumes that clock_nanosleep() is always available. But it
is only available with NPTL. Since it unconditionally uses it, we add
dependency on NPTL.

Fixes:
http://autobuild.buildroot.net/results/c87/c87cd4a7b0bed938506bcf7e88d4cda60e28e6e5/

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nginx-naxsi: clarify pcre dependency

It is not directly obvious why we select pcre but not add it to the .mk
file, so add a comment to clarify.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

breakpad: enable for uClibc

There's nothing holding it off for uClibc-based toolchains so enable it.

Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/urg: fix build caused by missing header inclusion

Update select-h patch to also fix the C++ serial driver.

Fixes:
http://autobuild.buildroot.net/results/cd7/cd76699188d2ee99b5f2d32b6a797de0d832a192/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcap-ng: annotate licenses with components

libcap-ng.so library is released under LGPLv2.1+ and programs testcap,
filecap, netcap and pscap are released under GPLv2+.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcap-ng: bump version to 0.7.8

Drop upstream patch

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: update legal info

Programs are released under GPLv2+. README file says libraries
libaudit.* and libauparse.* are released under LGPL but there are two
files auparse/strsplit.c and lib/strsplit.c which are released under
GPLv2+ which makes both libraries GPL. Until we review situation with
upstream, we simply mention "unclear (libraries)".

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: add "unclear (libraries)" as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: bump version to 2.6.7

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: remove autoreconf

Commit upstream 51925b7dd6d0("package/audit: Bump to version 2.6.5")
removed patch 0002 as part of version bump. But forgot to disable
autoreconf.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: add optional dependency on audit

login and hwclock can be built with audit support. This patch adds
optional dependency on audit package if it is already selected.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: add optional dependency on readline

fdisk and sfdisk tools can be built with readline support. This patch
adds optional dependency on readline if it is already selected.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libubox: update legal info

Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Jain <rahul.jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libubox: bump version

Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: bump version

And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at
last.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{2, 14}.x and 4.4.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.7.x series to 4.7.4

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: fix potential entire root filesystem removal

This reverts commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:

- The user has selected a "known toolchain profile", such as a Linaro
   toolchain, a Sourcery CodeBench toolchain etc. People using "custom
   toolchain profile" are not affected.

- The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
   indicate that the toolchain is already locally available (as
   opposed to having Buildroot download and extract the toolchain)

- The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
   toolchain is directly available through the PATH environment
   variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
   will do something silly (remove the toolchain contents), but that
   are limited to the toolchain itself.

When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.

This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79.

Commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22b20d6140a5b58a6d1e35598fb3c0d3: core: do not attempt
downloads with no _VERSION set).

However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:

- Buildroot downloads the toolchain tarball (while we're saying the
   toolchain is already available). Not dramatic, but clearly buggy.

- Buildroot registers a post-extract hook that moves the toolchain
   from its extract directory (output/build/toolchain-external-.../ to
   its final location in host/opt/ext-toolchain/). Before doing this,
   it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
   should normally be host/opt/ext-toolchain/).

Another mistake that caused the bug is commit
b731dc7bfb9c8ce7be502711f0b44ccab5515f1d ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.

To address this problem, we:

- Revert commit a0aa7e0e1750f6ace2879ea8adb1425a41431b79, so that
   _SOURCE and _SITE are empty in the pre-installed toolchain case.

- Rework the code to ensure that similar problems will no happen in the
   future, by:

   - Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
     BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
     only needed when Buildroot downloaded the toolchain.

   - Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
     is the path in which Buildroot installs external toolchains when it
     is in charge of downloading/extracting them. Then, the
     TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
     is guaranteed to be non-empty.

   - Replace the removal of the directory contents $(var)/* by removing
     the directory itself $(var). The directory was anyway already
     re-created if needed afterwards. Thanks to doing this, if $(var)
     ever becomes empty, we will do "rm -rf" which will fail and abort
     the build, and not the catastrophic "rm -rf /*".

Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.7.4

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libinput: bump to version 1.5.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: bump to version 3.3.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: Add support for Solidrun's MX6 Cubox/Hummingboard

Add support for Solidrun's MX6 Cubox/Hummingboard.

For more information about these boards, please check:

https://www.solid-run.com/freescale-imx6-family/hummingboard/
https://www.solid-run.com/freescale-imx6-family/cubox-i/

U-Boot is capable of detecting the version of the board in run-time
and loads the correct dtb.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pyusb: bump to version 1.0.0

Remove dependency on Python 2 only.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: bump to version 4.4.1

Remove upstream patch.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pango: bump to version 1.40.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: bump version to 7.50.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

httping: bump to version 2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wandboard: Remove unneeded return code

There is no need to handle this return code, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/urg: fix build"

This reverts commit 57e61a91531bf8ea696b5613bd8d846cc645a1d5.

The patch doesn't apply, and makes the urg package fail in all
situations.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: Use upstream patch to fix aarch64 build

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: add patch to fix build issue

Bumping libupnpp to version 0.15.0 introduced a build error for some
architectures:

```
./libupnpp/workqueue.h:308:29: error: field 'res' has incomplete type
         std::future<void *> res;
                             ^
./libupnpp/workqueue.h: In member function 'bool
WorkQueue<T>::start(int, void* (*)(void*), void*)':
./libupnpp/workqueue.h:81:25: error: invalid use of incomplete type
'class std::packaged_task<void*(void*)>'
             w.res = task.get_future();
```

The problem is that `std::future` is not available for all
architectures, e.g. it is missing for ARMv5 (soft-float). libstdc++
enables `std::future` only if `ATOMIC_INT_LOCK_FREE > 1`, which
according the the libstdc++ documentation means that operations on
atomic ints are guaranteed to be lock-free.

This check is not true for some target, e.g. the toolchain for the
ARMv5 target defines:

```
$ echo | /usr/bin/arm-linux-g++ -dM -E - | grep ATOMIC_INT_LOCK_FREE
#define __GCC_ATOMIC_INT_LOCK_FREE 1

```

We add a patch from upstream which detects if `std::future` is available
and opts-out the functionality for unsupported targets.

Fixes:
http://autobuild.buildroot.net/results/f8eb38ef79160e1f646dae0be19f27fae82a58bc
http://autobuild.buildroot.net/results/158e0ceeff009146b78a0d2bb278c76479bafc34
http://autobuild.buildroot.net/results/1760cf53c77e16bb2b5bc795bd0ce5eb65f258f2
http://autobuild.buildroot.net/results/5b73e52495aa1bbb2c704492237da784b9d74bc2
http://autobuild.buildroot.net/results/6d922a1bbace024fcf040beb49bbb119036865ef
http://autobuild.buildroot.net/results/bebb8983e7579ee4b4bcf18f037c7797ab86f8db
http://autobuild.buildroot.net/results/0f1a5832ced2a6ec2e18f9f14197446fda6af692
http://autobuild.buildroot.net/results/94a9cc349f23a47246b06619a019bcb917493415
http://autobuild.buildroot.net/results/19fba094098af5c1ce1e1371e5e88393c4a6ac9c
http://autobuild.buildroot.net/results/578935b5c04005d1f096059387d16911f953ec6f
http://autobuild.buildroot.net/results/2ad698f1665b7b886141672181cb76ec3c40a743

and more...

Note, that we enable autoreconf as the patch touches configure.ac.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/wandboard: Remove BR2_LINUX_KERNEL_CUSTOM_GIT

Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.

This fixes the following warning:

make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/orangepipc: Use Linux 4.7.3

There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/orangepipc: Use u-boot 2016.09

Among others, this adds support for the ethernet interface.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump version to 3140200 (3.14.2)

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apache: add customization of MPM

MPM can be selected between event, prefork or worker
Set worker as the default one as it was before even if event MPM is
better on system supporting thread safe polling

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mx6ulpico: Use kernel 4.8-rc5

With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: allow specifying 4.8 as kernel header version

Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.

In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/warp7: Use mainline U-Boot

warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.

As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/wandboard: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6ulpico: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-rtsp-server: new package

Based on patch by Phil Edworthy:
http://lists.busybox.net/pipermail/buildroot/2010-June/035777.html

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Piotr Nakraszewicz <piotr.nakraszewicz@imgtec.com>
Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
[Thomas: add host-pkgconf to the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/urg: fix build

Update select-h patch to also fix the C++ serial driver.

Fixes:
http://autobuild.buildroot.net/results/cd7/cd76699188d2ee99b5f2d32b6a797de0d832a192/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nginx-naxsi: add missing pcre dependency

Fixes:
http://autobuild.buildroot.net/results/9c7/9c7bad6831b09251af81e2bbfc595a241df87c70/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: add patch to disable pie

Ubuntu 16.10 has pie enable by default. This causes a build failure with
syslinux.

https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1579023

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas: improve patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vim: bump version to v8.0.0001

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Make explicit that a ext4 rootfs is used

Make explicit that a ext4 rootfs is used.

As explained by Thomas Petazzoni:

"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:

-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas 11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

micropython: add upstream patch to fix build failures

This allows micropython to build with a host python version of 2.6.

Fixes:
http://autobuild.buildroot.net/results/212cee82cc9db81cf1524925d106e01fc1e62ce5
http://autobuild.buildroot.net/results/4f72a602702f4eac1fe8c4a385ebfeb6e1c50df2

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pugixml: Fix CMakelists.txt cxx_long_long_type bug.

CMakelist.txt tries to enable the cxx_long_long_type option,
even if the feature isn't available. (Which causes some builds to fail)

The included patch checks if the option is present before applying it.

The patch was backported from:
https://github.com/zeux/pugixml/commit/4dbb5646196a4a3cc94097f1473ef11d1d44df11

Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php-ssh2: fix kconfig circular deps after libssh2 fix

After we simplified the libssh2 dependencies, the new dependencies were
not propagated to the php-ssh2 package, causing circular dependencies:

    package/openssl/Config.in:1:error: recursive dependency detected!
    package/openssl/Config.in:1:    symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBSSH2
    package/libssh2/Config.in:1:    symbol BR2_PACKAGE_LIBSSH2 is selected by BR2_PACKAGE_PHP_SSH2
    package/php-ssh2/Config.in:1:   symbol BR2_PACKAGE_PHP_SSH2 depends on BR2_PACKAGE_OPENSSL

Just drop the now-useless dependency inherited from libssh2: libssh2 now
has no dependency.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/minnowboard-max: Add kernel options to support USB disks

As reported by bug #9176 the current v4.6 kernel config
(used by Minnowboard MAX and Turbot) does not support
USB disks. Since this is a pretty essential functionality,
it's desirable to have it, so let's add the required options.

Kernel config linux-v3.8.config (currently used by the first
generation Minnowboard) doesn't need this change.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6dlsabresd: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use the common genimage template

* Generate an sdcard image based on the common Freescale genimage
template.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: use the common genimage template

The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.

This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
The offset of the first partition was 1MB in the script and is
modified to 8MB in the template.
* Fixes the readme.txt file accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: factorize genimage logic

For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
  genimage.cfg.template because they all use the same layout.  The only
  difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
  which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix makeinfo related issue

The latest version of binutils, 2.27, added in commit
b700157db40410907d6a07582eacbb5030fd919e, fails to build on systems
that don't have makeinfo installed. This commit therefore applies the
same fixup as the one used for binutils 2.26, which consists in
touching all the .info files, so that they don't get rebuilt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh2: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh2 has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh2 can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

Fix this dependenc byt doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

This in itself is already incorrect, but that can cause further issues,
as some packages (e.g. Kodi) will select (indirectly) openssl, and has
an option to select libssh; enabling that option causes unmet direct
dependencies of libssh:

    warning: (BR2_PACKAGE_KODI_LIBSSH) selects BR2_PACKAGE_LIBSSH which
    has unmet direct dependencies (BR2_USE_MMU && !BR2_STATIC_LIBS &&
    BR2_TOOLCHAIN_HAS_THREADS && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS
    && !BR2_PACKAGE_OPENSSL)

Fix this dependency by doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>