harfbuzz: bump to version 1.1.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: Fix for NFS booting with interface config via DHCP

Configuring the network interface with DHCP via
/etc/network/interfaces generally does not work when NFS booting.  The
DHCP configuration will initially bring the interface down and system
then hangs at that point as the root filesystem is no longer
accessable.

This adds a script to be run via a pre-up line in
/etc/network/interfaces.  It checks for a NFS root filesystem and if
the interface to be configured is used for access to the NFS server.
If this is the case, then it returns a failure code so that ifup will
not configure the interface.  This works for DHCP and another config
methods (static, bootp, etc.).  This system does detect if the
interface to be configured isn't the one used for NFS and doesn't skip
it when that is the case.

NFS filesystems that aren't the root fs aren't considered.

Fixes bug #4790.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslog-ng: Bump version to 3.7.2

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: readme.txt for Intel Galileo Gen 1/2

Created a readme.txt for the Intel Galileo Gen 1/2 that describes,

 * How to build for the Intel Galileo Gen 1/2
 * How to access the console on the Intel Galileo Gen 1/2

Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

udisks: make libgudev selection consistent

In all other package the condition for BR2_PACKAGE_LIBGUDEV selection is
BR2_INIT_SYSTEMD. Do the same for udisks.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/*: test for BR2_PACKAGE_LIBGUDEV for dependency

Make the case of adding libgudev as a dependency more consistent with all
other dependency packages. The <pkg>_DEPENDENCIES variable sets the build
order which is conceptually independent of the underlying reason for that
dependency.

Also, remove the comments in hidapi.mk and udisks.mk. These comments explain
why BR2_PACKAGE_LIBGUDEV is selected, so the comments in corresponding
Config.in files are enough.

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nano: bump to version 2.4.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcr: new package

[Thomas: add explicit --with-gtk when gtk is available.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: add support for Intel Galileo Gen 2

Board support package includes:

 * Toplevel build root configuration
 * Github based 3.8.7 Kernel
  * Upstream 3.8.7
  * Linux 3.8.7 Kernel Driver Patches
 * Linux 3.8.7 configuration
 * Grub configuration
 * Init Script to load modules
 * genimage config to create sdcard image.

[Thomas: simplify post-image script since there is now only one call
to genimage.]

Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: add patch to fix PEP 3147 issue with automake built packages

Packages built with automake use a `py-compile` helper to byte-compile
Python source files. This script uses the "py_compile" module from the
standard library. In turn, the compile() function in the "py_compile"
module invokes the cache_from_source() function provided by importlib.

This commit adds a new patch named "020-importlib-no-pep3147.patch"
that changes cache_from_source() and source_from_cache() in importlib
to get rid of the "__pycache__" directory.

This commit fixes the following import error in kmod when the module
is built for Python 3:

  >>> from kmod import Kmod
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  ImportError: cannot import name 'Kmod'

Moreover, this commit removes two patches that are no longer necessary
since modifying cache_from_source() and source_from_cache() disables
PEP 3147 for the standard library and distutils / setuptools.

 * 004-old-stdlib-cache.patch
 * 016-distutils-no-pep3147.patch

Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

readline: install configuration file from package recipe

/etc/inputrc is configuration file for readline. However, until now, it
was provided by skeleton. This patch install /etc/inputrc from readline
recipe.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: specify architecture variant for sparc

Instead of using a patch to specify the architecture variant for
sparc, use some Boost configure variables.

[Thomas: reword commit log.]

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

skeleton: remove unused /etc/issue

/etc/issue is managed with BR2_TARGET_GENERIC_ISSUE. In case
BR2_TARGET_GENERIC_ISSUE is set (which is default), /etc/issue
is overwritten. In case BR2_TARGET_GENERIC_ISSUE is not set,
we don't want /etc/issue exist.

Finaly, remove /etc/issue from skeleton.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hidapi: new package

[Thomas:
 - use BR2_INIT_SYSTEMD instead of BR2_PACKAGE_SYSTEMD for the
   libgudev handling. This is consistent with what we do in libmbim,
   modem-manager and network-manager. Only udisks is diverging from
   this by using BR2_PACKAGE_SYSTEMD.
 - Fix the license info: it is GPLv3 *or* BSD-3c *or* the specific
   HIDAPI license. Added LICENSE-orig.txt to LICENSE_FILES.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltp-testsuite: bump to version 20150903

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

swig: use a relative path for the host swig2.0 symlink's target

An absolute path isn't really necessary and breaks relocating

Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pixman: bump version to 0.33.4

Removed patches applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-input-synaptics: bump version to 1.8.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-input-libinput: bump version to 0.15.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libinput: bump version to 1.1.0

Also rebased 0001-rename-log_msg-to-libinput_log_msg.patch.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-input-evdev: bump version to 2.10.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xkeyboard-config: bump version to 2.16

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xkbcomp: bump version to 1.3.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xapp_xinput: bump version to 1.6.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cryptsetup: fix hash source link

Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 11.0.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: bump version to 2.8.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fbgrab: bump verstion to 1.3

Changelog (see [1] for details):
  - Added support when active framebuffer is not starting at offset 0
  - Fixed broken re-ordering of colors, rgba to argb
  - Fixed broken path for man page

[1] http://fbgrab.monells.se

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libxmlpp: bump to version 2.40.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibmm: bump to version 2.46.1

Adjust pulseview/libsigrok for the gcc >= 4.8 dependency.

Line wrap comment depends for pulseview.

Drop redundant libsigrok depend on comment for libsigrok++.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigc: bump to version 2.6.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libevdev: bump version to 1.4.5

Changelog (see [1] for details):

  Only a small fix, the suggested hwdb entry that the touchpad-edge-detector
  printed used the wrong codes for ABS_X and ABS_Y. Fixed with this release,
  the output is now suitable for copy/paste into the udev hwdb.

[1] http://lists.freedesktop.org/archives/input-tools/2015-November/001227.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

olimex_a20_olinuxino_lime: bump u-boot to 2015.10

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdk-pixbuf: bump to version 2.32.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cmake: bump to version 3.4.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mosquitto: bump to version 1.4.5

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmicrohttpd: bump to version 0.9.46

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cryptsetup: bump to version 1.7.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

exiv2: bump to version 0.25

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: adjust Config.in text for mwifiex

With SD, USB and PCI-E variants available for several chips,
bus-prefixed entries get mis-aligned badly.
Rearrange them to use bus-suffixes instead.

Config options and the files themselves remain bus-prefixed.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-firmware: menu entries for mwifiex blobs

Firmware blobs for Marvell WiFi-Ex 8797, 8887, 8897 were already
there in linux-firmware tree but relevant options were not in Config.in.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2015.11.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsoup: bump to version 2.52.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libglib2: bump to version 2.46.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gvfs: bump to version 1.26.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rrdtool: bump to version 1.5.5

Drop the patches since this is a major bump and they're no longer
relevant.

Introduce the new RRDTOOL_RRDGRAPH option, in previous versions the
graphing functionality was bundled with the stats/database backend,
however for newer versions this can be disabled.
Since it's normally expected functionality the default is yes, however
all of the buildroot rrd-using applications can work without this.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

trinity: bump to version 1.6

Bump trinity version to 1.6. Remove backported vt.c missing include patch
as it is now included in the upstream release.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-utils: bump to version 1.1.0

Also add BAT (Basic Audio Testing) tool option.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-lib: bump to version 1.1.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnet: adjust license information

As noticed by Arnout, some files are under BSD-3c.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

netsniff-ng: new package

[Thomas:
 - add comment in Config.in to explain why this package depends on
   glibc, and specifically why it doesn't build for uClibc and musl.
 - add hash file.
 - add 'COPYING' to the list of LICENSE_FILES
 - add themissing <pkg>_DEPENDENCIES variable in the .mk file, to make
   sure dependencies are built before netsniff-ng.
 - add comment in the .mk file explain why we're using the
   generic-package infrastructure even if the build procedure is
   essentially ./configure, make, make install.
 - fix indentation in NETSNIFF_NG_CONFIGURE_CMDS.]

Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnet: new package

[Thomas: add hash file.]

Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipset: bump to version 6.27

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usb_modeswitch_data: bump to version 20151101

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usb_modeswitch: bump to version 2.2.6

Patch upstream so remove it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Kickoff 2016.02 cycle

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update for 2015.11-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: update for 2015.11-rc1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkgconf: fix incorrect variable-directory sysroot prefixing

According to the pkg-config documents ("specification") when
sysroot-prefixing is enabled via PKG_CONFIG_SYSROOT_DIR this should only
be applied to -I/-L directories (includes, library directories), and not
to all of the other variables that can specify a directory.

However xorg uses mapdir/sdkdir in a similar fashion in what could be
considered an abuse of the spec, hence needs to be prefixed as well.
And what's more, it also uses includedir in a nonstandard fashion just
requesting the value via 'pkg-config --variable=includedir libfoo' which
doesn't pass the standard prefixing rules for the --cflags and --libs
invocation.

This patch makes pkgconf behave in the pkg-config specified way with the
added exception for the includedir, libdir, mapdir and sdkdir variables
which are prefixed.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/external: fix gdbserver install with Linaro 2015.08

In the latest Linaro toolchain, the gdbserver has moved (surprise!)
and is now located side-by-side with the toolchain executables.

This commit adds this path as a new location where to search for a
gdbserver, and while at it wraps the line that has become too long in
the process.

[Thomas: rework commit log according to Yann's suggestion.]

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: remove integrator926_defconfig

Remove the integrator926_defconfig configuration, which has not been
updated since a very long time, and targets hardware that is quite
difficult, not to say impossible, to get.

While Qemu has an emulation for the Integrator CP platform, it doesn't
seem to emulate a hard drive, which makes it not very useful. In
addition, we already have the qemu_arm_versatile_defconfig for an
ARMv5 platform emulated in Qemu.

Therefore, let's get rid of this fairly old and never updated
defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: remove calao_snowball_defconfig

This defconfig has not been updated since a long time, and it now
fails to build because the latest version of U-Boot has removed for
the Snowball because nobody converted it to the new U-Boot
standards. And our defconfig was not specifying an explicit U-Boot
version for it.

On the kernel side, the Git repository has not seen any commits since
3 years, and generally speaking, the Snowball project and the SoC it
is based on are no longer being developed.

Consequently, let's get rid of this defconfig altogether.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gpsd: adjust udev rules file permissions

Adjust a generated udev rule file (25-gpsd.rules) to have user write
permissions. This is to prevent rebuild issues when the gpsd package
fails to re-install on a target (since the `cp` of the rule file will
fail due to permissions).

[Thomas: minor tweaks to code comments and commit title.]

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gpsd: correct explicit nmea 0183 support flag

The following handles the GPSd SCons change for the explicit
configuration of the NMEA 0183 protocol. The protocol configuration
change was introduced in 3.12. Developer's who transitioned to
Buildroot's GPSd 3.15 had NMEA 0183 implicitly enabled by default. This
change allows NMEA 0183 to be explicitly disabled again.

See:
 http://git.savannah.gnu.org/cgit/gpsd.git/commit/SConstruct?id=8f20d7b2d1ece8f3205ca038726c77daa5234c0c

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libconfuse: bump to version 2.8

Since libconfuse now has a proper release tar ball, this also adds a
hash, removes autogen, and removes a patch that is no longer needed.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fastd: needs host-bison and host-pkgconf

Fixes (missing host-bison):
http://autobuild.buildroot.net/results/237/2371c98112a416f4d9d32576f207dad8d80ac537

host-pkgconf derived from $(@D)/cmake/deps.cmake

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: fix typo in $(FOO_PKGDIR) documentation

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-protobuf: fix legal info

It uses the same tarball as protobuf hence suffers the same problem as
commit f700463c. Fixes:
http://autobuild.buildroot.net/results/428/4282281e5582b0da8ed3ff44f4d6d86f716ea333/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gauche: explicitly handle zlib

host-gauche currently fails to build if host-zlib was built before,
because it finds zlib.h, but due to issues in gauche's build system,
the LDFLAGS passed in the configure script (with -L
$(HOST_DIR)/usr/lib) are not passed all the way down to where -lz is
used, causing a build failure.

Since we don't need zlib support in host-gauche, we simply disable it
explicitly.

While we're at it, we make the optional dependency on zlib explicit
for the target variant of the gauche package.

Fixes:

   http://autobuild.buildroot.org/results/426/4269c465312ddcc801289914fa29427798ef7783/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "python3: add patch to fix PEP 3147 issue with automake built packages"

This reverts commit b58685355943d2c34606432d978d9efc6027f564, which
causes some build failures of Python 3:

  http://autobuild.buildroot.org/results/923/923c4242dbd6d277c1d88f663b5916ceced985d4/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libass: add asm support for Intel archs

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: document $(FOO_PKGDIR)

In the manual, add a note that packages can use $(FOO_PKGDIR) to get the
path to the directory containg the .mk and Config.in files, if they need
it to e.g. copy files from there, like startup scripts, systemd units or
any other resource.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: add patch to fix PEP 3147 issue with automake built packages

Packages built with automake use a `py-compile` helper to byte-compile
Python source files. This script uses the "py_compile" module from the
standard library. In turn, the compile() function in the "py_compile"
module invokes the cache_from_source() function provided by importlib.

This commit adds a new patch named "020-importlib-no-pep3147.patch"
that changes cache_from_source() and source_from_cache() in importlib
to get rid of the "__pycache__" directory.

This commit fixes the following import error in kmod when the module
is built for Python 3:

  >>> from kmod import Kmod
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  ImportError: cannot import name 'Kmod'

Moreover, this commit removes two patches that are no longer necessary
since modifying cache_from_source() and source_from_cache() disables
PEP 3147 for the standard library and distutils / setuptools.

 * 004-old-stdlib-cache.patch
 * 016-distutils-no-pep3147.patch

Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add Freescale i.MX6 SoloX Sabre SD support

The i.MX6 SoloX SABRE board for smart devices is Freescale's reference design
board based on the heterogeneous ARM Cortex-A9 + Cortex-M4 i.MX6 SoloX
applications processor.

This defconfig is inspired from previous freescale_imx6*sabresd_defconfig, and
is based on Freescale "official" git repo on git.freescale.com and SW release
3.10.53_1.1.0_ga.

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: prevent undesired cleanup with a usr merged target

The following commit prevents the e2fsprogs package from inadvertently
removing its own binaries when a target includes BusyBox and is
targeting a usr-merged environment.

While an action has been added to cleanup BusyBox-provided (if any)
ext2-related tools when including e2fsprogs, the action will delete
desired e2fsprogs binaries in an already prepared usr-merged target.
Adjusting the cleanup to occur before installing e2fsprogs binaries so
that if a usr-merged target exists, it will first delete the previous
binaries (if any) followed by installing new binaries.

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

protobuf: fix legal-info

The file changed from COPYING.txt to LICENSE, fixes:
http://autobuild.buildroot.net/results/c40/c40e9b6030584a4fd8b3e46f78f6d0702d1dc11e/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fastd: add new package

This is a new package for the fastd "Fast and Secure Tunneling Daemon"
which was developed for the Freifunk Gluon project in the first place.

It includes a patch to allow cross compiling with toolchains without
LTO support which fails with the unpatched version due to some ugly
cmake hacks in fastd v17, details in the patch.

[Thomas:
 - Get rid of trailing spaces in Config.in
 - Remove the BR2_PACKAGE_FASTD_OPENSSL, and simply rely on
   BR2_PACKAGE_OPENSSL
 - Remove -DWITH_CAPABILITIES=TRUE, since libcap support is anyway
   mandatory.
 - Use ON/OFF instead of TRUE/FALSE.]

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rng-tools: systemd: support extra options

Add a DAEMON_ARGS configuration variable in order to make it possible to
pass custom extra options to rngd. This environment variable must
defined in /etc/default/rngd if needed, like with the SysV init script.
This file does not have to be present if not needed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-web2py: fix permissions

The PYTHON_WEB2PY_PERMISSIONS table was using the user and group names
instead of the uid and gid, causing makedevs to retrieve the uid and gid
from the host system.

Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nginx: fix a typo

Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libuecc: new package

This package is a small library used for the Freifunk Gluon project
and will be used by other upcoming packages.

Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

protobuf-c: bump version to v1.1.1

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

protobuf: bump to 2.6.1

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdcadec: enable shared build

The libdcadec package currently only builds a static library, which is
naturally built without -fPIC (since this is generally not needed for
static libraries).

However, when the generated static library gets used inside a larger
dynamic library, such as ffmpeg's one, the link fails, since we're
trying to include in a shared library non-PIC code.

To solve this, this commit changes the way the libdcadec library is
built to make sure a shared variant of the library gets built when
appropriate. This way, ffmpeg has a PIC-enabled libdcadec library to
link with.

Fixes
http://autobuild.buildroot.net/results/bd3/bd34d1d2f2d35455d1ddefa1ec247c78f341603f/
http://autobuild.buildroot.net/results/4f7/4f7c87e47e763ce656c50b5862408b18e6f185ab/
http://autobuild.buildroot.net/results/998/99836db091af610a99dbc815b7fdf09cc1d531d1/
http://autobuild.buildroot.net/results/a19/a19023e094cbed491444665d6839a9e65a8eee6c/
http://autobuild.buildroot.net/results/98d/98dde028d1d6199f05c904b498bc39bbaa112aa6/
http://autobuild.buildroot.net/results/4ff/4ffcae6cae419df35e8ca29d429ee178bcf31882/
http://autobuild.buildroot.net/results/8ce/8ced16874255ace4923f6b8888c3fca07f28b804/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

yad: new package

[Thomas: remove dependency on libglib2, as it is not tested directly
by yad's configure script, and is anyway guaranteed to be available
since yad depends on gtk2 or gtk3, which both require libglib2.]

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gauche: new package

Gauche is an R7RS Scheme implementation developed to be a handy script
interpreter, which allows programmers and systemadministrators to write
small to large scripts for their daily chores. Quick startup, built-in
system interface, native multilingual support are some of its goals.

Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

irssi: change IRSSI_SITE back to original url

The official site is now back online.

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/git: Used curl-config program for target

Fix cross compilation by using curl-config script for target instead of the
one from host.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

git: fix config option used to detect libcurl availability

BR2_PACKAGE_CURL is currently used by the git package to find out if
libcurl is available. While indeed BR2_PACKAGE_CURL indicates that
libcurl is available, it is not the most appropriate option for this:
BR2_PACKAGE_LIBCURL is better. BR2_PACKAGE_LIBCURL indicates that
libcurl is available, while BR2_PACKAGE_CURL indicates that both
libcurl and the curl program are available. Only the former is needed
by Git.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-generic: allow step hooks to fail a step

Currently, we touch our stamp files before we call the step hooks.
This means a step hook can not properly fail a step, since the stamp
file exists even if the hook exits in error, thus a subsequent 'make'
would not try to redo that step.

Fix that by calling the hooks before we touch the stamp files.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iproute2: bump to version 4.3.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

haveged: fix systemd service path

'haveged' is installed in /usr/sbin, not /usr/bin.

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: use <pkg>_EXCLUDES, not <pkg>_TAR_EXCLUDES

As reported by Steven Noonan, the variable recently introduced in the
package infrastructure to exclude certain parts of an archive from
being extracted is <pkg>_EXCLUDES, not <pkg>_TAR_EXCLUDES. However,
the gcc code was incorrectly using <pkg>_TAR_EXCLUDES. This commit
fixes that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Steven Noonan <steven@uplinklabs.net>

toolchain-external: make extraction idempotent

Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.

Simply remove the destination contents before moving.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/arm: VFP and Thumb1 are not compatible

gcc will refuse to build with both --with-mode=thumb and --with-fpu=vfp,
with error messages during ./configure, like:

    checking for suffix of object files... configure: error: in `/home/ymor
    in/dev/buildroot/O/build/host-gcc-initial-4.9.3/build/arm-buildroot-lin
    ux-uclibcgnueabihf/libgcc':
    configure: error: cannot compute suffix of object files: cannot compile
    See `config.log' for more details.

And config.log informatively contains:

    sorry, unimplemented: Thumb-1 hard-float VFP ABI

This is an error message that comes deep from gcc source files.

If gcc says it does not support VFP with Thumb1, then let's disable that
combination in our menuconfig.

Prefer VFP over Thumb1, i.e. hide Thumb1 when we're not soft-float.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtirpc: rpcgen is only built for host, don't install to target

rpcgen is only used to generate headers needed for compilation.
Move it to noinst_PROGRAMS otherwise you may end up with a host-arch
binary in your target.

Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: disable ldconfig through configure option

Systemd v216+ includes a configure option to disable ldconfig.

Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{12, 18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>