git.libre-soc.org Git - gem5.git/log

arch, x86: Rework the debug faults and microops.

This makes the non-fatal microops advance the PC, and adds missing
functions. The *_once Faults now also can be run once per *something*.
They would previously be run once per Fault invoke function which is
common to all M5WarnOnceFaults. The warn_once microop will now warn
once per message.

Change-Id: I05974b93f3b2700077a411b243679c2ff0e8c2cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20739
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

systemc: Make TLM port wrappers for tlm_base_(target|initiator)_socket.

These are useful if using TLM sockets without using the standard TLM
protocol. For instance, when used with ARM's fast models, this can wrap
sockets which carry the opaque GICv3Comms protocol.

Change-Id: I329a919068f958abbde2cb83683d3a3ae2e05a20
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20860
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

systemc: Expose the utility functions for payload->packet conversion.

These can be used anywhere someone needs to turn a packet into a
payload or vice-versa.

Change-Id: I26a1f134e6fbec81b230a2853cf79264e80bf2dc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20859
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow IOMMU binding to HDLcd

Change-Id: I894080e7bd76e7efedef141c937e1561c0c0527c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20841
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Store the IOMMU reference from within the SMMU::connect

Change-Id: I35718a71dc040ee4acad9eee2a07076ebb571304
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20840
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev: Enable DTB IOMMU binding with a DMA object

This happens by storing a iommu reference in the dma device, and by
calling the addIommuProperty method once doing dtb autogeneration for
the device

Change-Id: Ibd585addac686a9eeaba6959f459d81901087549
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20839
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

sparc: Fix a warning/error in tlb.cc.

gcc has started to not like memseting an ojbect to zero in some cases.
Cast the TlbEntry pointer to a void * before memsetting it to placate
gcc.

Change-Id: Iccb3c326fdb82f1f111329ff1a80bb6719cace47
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20830
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev: Generalize the x86 int source/sink pins.

Sink pins are now templated based on the underlying device types, and
the pins themselves are based on the new, generalized Port mechanism.

Change-Id: I09c678c56f6eb6b4a167c12f221ae0241fe99c2d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20700
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Fix BDI size calculation

The bitmask field indicates to which base a delta refers, and in
the original paper it is fixed and proportional to the highest
number of bases allowed in the compressed data.

Change-Id: I271bf2e19e0765de52b933eaf6d4fcc2ce25d185
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19748
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Add a perfect bloom filter

Add a bloom filter that keeps track of all observed entries, and
thus has no false negatives nor false positives.

Change-Id: Iba784e617a99c77554c688470d9b9e12c260f23b
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18879
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

stats: Add M5_VAR_USED to variable

Fixes compile error for gem5.fast due to unused variable.

Change-Id: Ib1664b100e95a741174610f8cdbdebaff9635f66
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20759
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Fix incorrect name conflict panic with grouped stats

Info::setName() performs a sanity check to ensure that the same stat
name isn't used twice. This doesn't work for new-style stats with a
parent group since the name is only unique within the group. Disable
the check for new-style stats since these usually use names generated
from member variable names.

Change-Id: I590abe6040407c6a4fe582c0782a418165ff5588
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20760
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Ignore non-Group objects in stat hierarchy

Some objects, such as SystemC modules, are not a subclass of
Stat::Group. Calling the addStatGroup function on them causes errors.
This changes ignores those objects that are not Stat::Group in the stat
hierarchy.

Signed-off-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Change-Id: I9b62419417b7af7331461fbfaf15e45a4ee2b35f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20680
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Make Bloom Filter counting by default

Since a boolean bool filter is a saturating bloom filter with a
single bit per entry, generalize them by using SatCounter instead
of int for the filter entries.

Change-Id: I7f54e28d54de5671e0770b02ed9161735e6bd339
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18877
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

base: Make Bulk inherit from MultiBitSel Bloom Filter

Cleanup bulk's code and make it inherit from MultiBitSel.

Change-Id: I83154feb30bb3dac3d02743bcafbdcb57489c2fd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18876
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-ruby: Move Bloom Filters to base

All Bloom Filters are completely independent of Ruby, and
therefore can be used everywhere.

As a side effect, Ruby was not using the filters, so
their dependency was removed.

Change-Id: Ic5f430610c33c0791fb81c79101ebe737189497e
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18875
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem: Mark MemObject as deprecated.

It's constructor will now warn that it's deprecated and suggest using
ClockedObject directly. This change also gets rid of the params()
method and the Params typedef since they are functionally equivalent to
the ClockedObject versions.

It also removes the include of mem/port.hh which is not used in
mem_object.hh. This may break code which purposefully or (more likely)
accidentally depended on that transitive include from mem_object.hh.

Change-Id: I6dab3ba626e3f3ab6a6bd86edcf4f5cb4d6d2c45
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20720
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Reset HPPI when clearing an LPI

Change-Id: I2a69e6cef69aa48d7c265d59915b859e5eac2bcc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20638
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Add resetHppi method in the GICv3 cpu interface

The method is used for resetting the highest priority pending interrupt
interrupt from the cpu interface if it matches the intid passed as an
argument.

Change-Id: I9fbc4cb3e05a1cc32f853b6afab5c2bc99369435
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20637
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Cleanup GICv3 initialization

This patch is removing the unnecessary initState() / reset() methods
from GICv3 classes, since we can initialize everything at
construction/init time

Change-Id: Ia70edcc4ca4f11878fac0024342e4f2cd81883a0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20636
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Initialize GICD_TYPER once at construction time

Change-Id: Ib4dfdf7005709c22b4ba95099b1192f6edd6ff06
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20635
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Writes to IGRPEN1_EL3 triggering update

Change-Id: I56804eb1bfc8913bd0d3cab05865a382bf270bc1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20634
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix GICv3 ITS cmdq wrapping

Change-Id: I979e8d1378d5b5d2647158798479cf4238f2c349
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20633
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix mapping between IGRPEN1_EL3 and IGRPEN1_EL1

Previous mapping was wrong because it was checking which security bits
it was accessing by using the inSecureState() function, whereas it
should have used the isSecureBelowEL3(). This patch is not making the
sostitution since it is optimizing the mapping furthermore by avoiding
updating both IGRPEN1_EL1 and IGRPEN1_EL3 on writes. The IGRPEN1_EL1
register is used as a storage, and any reads/writes to IGRPEN1_EL3 is
routed to that register.

Change-Id: Id318ec44e19d4f844e4e3410d74d0c4f89810811
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20632
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Implement message-based SPIs

Change-Id: I35e79dfd572c3e0d9cadc8e0aab01befd6004ece
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20631
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Scrub out some lingering uses of MemObject.

MemObject doesn't do anything any more, and is basically just an alias
for ClockedObject.

Change-Id: Ic0e1658609e4e1d7f4b829fbc421f222e4869dee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20719
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICD_SGIR register

The Distributor Software Generated Interrupt Register is implemented
only if affinity routing is disabled. Since this configuration is
currently not supported in gem5, it has to be treated as RES0.

Change-Id: I9ffcb31b26fc17547f74a4f1d43ce72c59786fa8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20630
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

python: Make the dot writer handle unconnected Port vector elements.

Change-Id: I5234013716cdcce5fc39e239dc3d92cd1f2b7799
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20699
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev: Enable Terminal output's dump to stdout

While the default option is to dump the Terminal content in a file (e.g.
m5out/system.terminal), with this patch it will be possible to choose to
dump it to standard output.

Change-Id: If51c2fd671fa3eb0867a855b5f7d3b0df9cad025
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20639
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: State update when setting MISCREG_ICC_IGRPENx register

This is because by enabling ainterrupt group at the cpu interface, we
need to check if a previously pending interrupt needs to be forwarded to
the PE.
We are doing the same when globally enabling irqs in the distributor
(GICD_CTLR).

Change-Id: I80aeb87b2a58a108de899006d5a2f12eadbe6c2e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20629
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_IGRPEN1_EL1 using AA64 banking

Change-Id: Ic08ac1e7f3ebef408a83aa068ce15e9dfe2aa3cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20628
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_AP1R0_EL1 using AA64 banking

Change-Id: Ide93464f62288fbe8f409f718487a15512c01295
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20627
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm, dev-arm: MISCREG_ICC_CTLR_EL1 using AA64 banking

Change-Id: Ib1691f1cba08251a36ceb959849b61c33cc3e93b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20626
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: MISCREG_ICC_BPR1_EL1 using AA64 banking

Change-Id: Ib30c7a49490f05f88ddfd7572dd360cb92647f81
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20625
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add read/writeBanked helpers to GICv3

These will be used by AA64 security banked registers in GICv3.

Change-Id: Ia980c4f5c14187ab9c18da1d1d596562644111ae
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20624
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Add explicit AArch64 MiscReg banking

Change-Id: I89836d14491a51b1573f45c8012e3ad12b107d24
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20623
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Use same template across all MSR inst

Change-Id: Ifb9f1db288e401761b71ccf426e370c475e5663f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20622
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: SySDC64 Instructions (CMO) using MiscRegIndex

Change-Id: Ia66d6abf965b1d33579e8fa048608d99c93ff2ce
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20621
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Fix segmentation fault in VirtIOBlock

GEM5 got a segmentation fault when the size is large in
VirtIOBlock::write. This change uses a vector to avoid this segmentation
fault.

Signed-off-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Change-Id: I26272686a6e7e39cdf2389657ecd38ce90261144
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20679
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: fix GDB stub after SVE

The SVE patches made registers longer by increasing NumVecElemPerVecReg,
but the GDB XML was not updated to account for that, and as a result GDB
connections were failing with:

Remote 'g' packet reply is too long

This commit introduces NumVecElemPerSimdVecReg which counts only the SIMD
register sizes to get it back working. SVE GDB support is not added here.

Change-Id: I4191b9f1999ae02b0308863db4cc9b5b16a27d6d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20468
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite ICC_BPR0/ICC_BPR1 handling

The patch is fixing BPR reads in AA32, by removing the line

Gicv3::GroupId group =
misc_reg == MISCREG_ICC_BPR0_EL1 ? Gicv3::G0S : Gicv3::G1S;

Where a read to ICC_BPR0 will return a G1S group.
The patch is also fixing Security banking accesses.

Change-Id: I28f1d1244c44d4b8b202d3141f8380943c7c1c86
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20620
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Add GICv3 unimplemented Hyp Active Priorities Group regs

ICH_APxR1, ICH_APxR2, ICH_APxR3 are implemented only if supporting more
than 6 bits of priority. Since this is not the case, they are currently
unimplemented.
According to spec, unimplemented registers are RAZ/WI.

Change-Id: Ifd7f7a3d42b4575c2f7aff3b95d5a47ac1e61842
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20619
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow 32-bit access to GITS_TYPER

Change-Id: I9d19174b38ba70f82050102f955ccc162965d1fb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20618
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Cpu interface groupEnabled check for global enable

Gicv3CPUInterface::groupEnabled should check for global enable flags at
distributor level:
- Gicv3Distributor.EnableGrp0
- Gicv3Distributor.EnableGrp1S
- Gicv3Distributor.EnableGrp1NS

Change-Id: I1c855b0e4c2bc8f1cd0a8f086b9450f516177b08
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Check if INTID group is enabled when reading HPPIRx

If it is not enabled, it should return INTID_SPOURIOUS

Change-Id: I4dfa8b9fcea874b4d281cd154dd38752b05e1d59
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20616
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Writing GICD_CTLR should trigger an update

This is the case where an interrupt is pending, but the distributor is
masking it. As soon as the group gets enabled, the interrupt should be
forwarded to the PE.

Change-Id: Ie428780bde7e4726688adf78dfcc4d43d1b45261
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20615
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Rewrite GICv3 update

The GICv3 update methods are method which are invoked anytime the model
needs to evaluate a change in its state, which most of the time means
managing the state of an interrupt (forwarding it to a PE, deasserting
it, etc).
The way it is currently done is a little bit obscure and doesn't
handle correctly IRQ prioritization.
Example:
An IRQ which is handled by the redistributor (PPI or LPI) was not
competing with any pending interrupts coming from the distributor (SPIs)
once raised by a peripheral.

Also the way the pending state of an interrupt was removed at the
cpu interface level wasn't happening in place where this was actually
happening (E.g. when activating it), but happened with a weird
fullUpdate semantic, where if there was a pending interrupt in a
cpu interface, all cpu interfaces had their pending interrupt (if any)
been disabled.

With this patch, state update always starts at the distributor, and
it goes down until the cpu interface where a Gicv3CPUInterface::update
method selects the winning interrupt coming from distributor/redistributor
to be forwarded to the PE.

Change-Id: I1c517cbc4bf107cc2d7ae7beb2692e3cf5187a40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20614
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GICv3 IGRPMOD writes

Writes to IGRPMOD were not right shifting the value, which resulted in
interrupts having a IGRPMOD value > 1, whereas the only allowed values
are 0 and 1.

Change-Id: Id491bd1b184d6e5abeeea25ea272eeb91792ccf7
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20613
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: SGI registers undecoded in AArch32

Change-Id: I64d3e639e1beaa507263637d59499aafeb5a19f8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20612
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-arm: Fix read/setMiscReg for AArch32 GICv3 ICC regs

The readMiscReg/setMiscReg methods were not forwarding register
reads/writes to the cpu interface when in AArch32.

Change-Id: Ide983e793b8033a88d31fe6ea87eaeffe9b093f5
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20611
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev-arm: Fix SGI generation

The patch is fixing the following aspects of SGIs

* The conditons over which an SGI can be forwarded to a PE
* SGIs in AArch32 (see below)

It is in fact refactoring SGI generation under a common method in the
cpu interface. It is abandoning the implicit fallthrough mechanism not
only for cosmetic reasons, but also because checking "misc_reg ==" was
only working if the register was an AArch64 one (e.g.
MISCREG_ICC_SGI0R_EL1) and not the AArch32 counterpart (MISCREG_SGI0R).

Change-Id: I6fedfb80388666f4f1d20f6abef378a9f093aa83
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20610
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Gicv3 ITS device tree autogen

This patch adds device tree automatic generation for Gicv3 ITS.

Change-Id: Ic01500ffa691b331f527c5c2c785ff715660b0c2
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20609
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: modify GICv3 ITS default addr

The current default base address for GICv3 ITS stated in RealView is
0x2c120000. The redistributors base address is 0x2c010000; each
instantiated core has an associated redistributor with memory region
size 0x40000 (with GICv4 extension, enabled by default). With 8 cores,
the redistributor range spans to 0x2c210000, creating a conflict with
the ITS address space.

This patch changes the ITS base address to 0x2e010000 which guarantees
no overlapping with the redistributor.

Change-Id: I7dc1af9e69ac037f85ae96f0985554f1fb8372a0
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20608
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86: Adding warning for movnti

We are ignoring the non-temporal hint here, and implementing this
instruction as a cacheable instruction.

This change adds a warning to let user know about this workaround.

Change-Id: I2e40437a44282fe9cf7772a25a8870bd8729a6ed
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20428
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

dev-arm: Improper translation slot release in SMMUv3

The SMMUv3SlaveInterface is using the xlateSlotsRemaining to model a
limit on the number of translation requests it can receive from the
master device.

Patch

https://gem5-review.googlesource.com/c/public/gem5/+/19308/2

moved the resource acquire/release inside the SMMUTranslationProcess
constructor/destructor, for the sake of having a unique place for
calling the signalDrainDone.
While this is convenient, it breaks the original implementation,
which was freeing resources AFTER a translation has completed, but
BEFORE the final memory access (with the translated PA) is performed.
In other words the xlateSlotsRemaining is only modelling translation
slots and should be release once the PA gets produced.

The patch fixes this mismatch by restoring the resource release in
the right place (while keeping the acquire in the constructor)
and by adding a pendingMemAccess counter, which is keeping track
of a complete device memory request (translation + final access)
and will be used by the draining logic

Change-Id: I708fe2d0b6c96ed46f3f4f9a0512f8c1cc43a56c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Adrian Herrera <adrian.herrera@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20260
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement invalidateASID in SMMUv3 WalkCache

This patch fixes a bug where issuing a invalidate-by-ASID command
(CMD_TLBI_NH_ASID) to the SMMU would cause Gem5 to crash.

Change-Id: I5b8343a17e43762fe3917560ae401a20be1e05b8
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20259
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Implement invalidateVA/VAA in SMMUv3 WalkCache

This patch implements VA/VAA invalidations in the SMMUv3 model.

As per SMMUv3.0 spec, if leaf bit is specified in the invalidation
command, only leaf entries within the walk cache need to be invalidated,
otherwise entries with intermediate translations are also invalidated.

Change-Id: I0eb1e1f1d8c00671a3c23d2a8fb756f2020d8d46
Reviewed-by: Michiel van Tol <michiel.vantol@arm.com>
Reviewed-by: Marc Mari Barcelo <marc.maribarcelo@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20258
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-x86: implement movntq/movntdq instructions

Non-temporal quadword/double-quadword move instructions.
This change ignores the non-temporal hint and instructions are
implemented to send cacheable request to memory.
This would have some "performance" impact (i.e. having some cache
pollution) to get better "correctness" in behavior.

Change-Id: I2052ac0970f61a54bafb7332762debcb7103202d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20288
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu: reset byte_enable across writeMem calls

data_write_req byteEnable which is used in ARM SVE partial writes was not
being zeroed between writes.

As a result, non-SVE memory write instructions such as STP that followed
SVE memory write instructions could still have the write mask active.

This could lead to wrong simulation behaviour, and to an assertion failure:

src/mem/packet.hh:1211: void Packet::writeData(uint8_t*) const: Assertion
`req->getByteEnable().size() == getSize()' failed. '`

Change-Id: I74b5a82675e9923b0ffdf2c1dd9afb00c91cb204
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20448
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev: Templatize PioPort.

When creating a base class which needs to be a SimObject, it's
necessary to decide ahead of time whether to use PioDevice or
BasicPioDevice in the hierarchy because they inherit from SimObject. If
they were added into the hierarchy later, then the original class would
inherit from SimObject, as would PioDevice. That would create a diamond
inheritance structure which would require virtual inheritance, and
that's a can of worms we'd rather not get into.

A big part of the PioPort mechanism is the PioPort itself which holds
a pointer to its parent device and delegates reads/writes to it. It
does that with a PioDevice pointer, and PioDevice declares virtual
functions for all the callbacks the port can call into.

Instead of that, this change templatizes PioPort based on the class of
the device that holds it. That will let you use a PioPort on *any*
class, as long as it has the methods PioPort depends on. That removes
the need to create an inheritance diamond to add a PioPort down the
line since PioDevice is no longer strictly required.

The PioDevice and BasicPioDevice classes are still around since they
still provide some additional functionality and there are existing
classes which depend on them.

Change-Id: I753afc1e0fa54b91217d54c1f8743c150537e960
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20568
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

ruby: Fix the way stall map size is checked for availability

To ensure that enqueuer observes the practical availability. We
check the message buffer queue size at the start of the cycle.
We also add the size of the stall queue to consider the total
queue size. However, messages can be moved from regular queue
to stall map. This leads to messages being considered twice leading
to false flow control. This patch fixes it by storing the stall map
size at the beginning of the cycle and considering it for checking
availability.

Change-Id: I6ea94f34fe5279b91f74e106d43263e55ec4bf06
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20389
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

configs: Fix replacement policy assignment

Commit d207e9ccee411877fdeac80bb68a27900560f50f reworked the tags
to split the replacement policies, however the name of the variable
that contains the replacement policy changed between patch revisions,
which was not updated accordingly in the configs files.

Change-Id: I2072529e2c7d54197c371bcaa323bfd9f34ec3ba
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20548
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Create HDF5 stat files relative to simout

When using the HDF5 stats backend, we currently pass the filename from
the command line straight to the HDF5 library. This behaviour is
different from the expected behaviour when using plain text stat files
where relative paths are resolved relative to simout. This change adds
support for resolving hdf5 paths relative to simout.

Change-Id: I09cb0b7468735e697125eda7f04c5a85725ca8d0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20508
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

stats: Catch exceptions by const reference

Catching exceptions by value causes -Werror=catch-value= to be
triggered during a build process. This change replaces the values
with const references in the catch blocks.

Change-Id: Iddabb595c5916d8120dcdb08e2c2f36ff21c3c9b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20528
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Add support for listing available formats

Add a command line option to list available stat formats and their
documentation.

Change-Id: I7f5f2272d9b0176639f59f2efedb9cab2f7da5b9
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19670
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arm,kvm: Fix python imports from global namespace

Change-Id: I31bd3563c2427efd7e520f714b1ca6f480fa4e85
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20491
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-cache: Use SatCounter for RRPV

Use SatCounter in RRIP's RRPV. As such, move validation functionality
to a proper variable.

Change-Id: I142db2b7f6cd518ac3a2b68c9ed48005402b3464
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20452
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

base: Add function to saturate SatCounter

Create a saturation function for the SatCounter that makes its
internal counter reach its maximum value.

Change-Id: Ibd30fa27c4ae2714dd48e3eba85addd035fb737c
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20451
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Add beta support for HDF5 stat dumps

This changeset add support for stat dumps in the HDF5 file
format. HDF5 is a binary data format that represents data in a
file-system-like balanced tree. It has native support for
N-dimensional arrays and binary data (e.g., frame buffers).

It has the following benefits over traditional text stat files:

  * Efficient storage of time series (multiple stat dumps)

  * Fast lookup of stats

  * Plenty of existing tooling (e.g., Python libraries and graphical
    viewers)

  * File format can be used to store frame buffers together with
    normal stats.

Drawbacks:

  * Large startup cost (single stat dump larger than text equivalent)

  * Stat dumps are slower than text

Known limitations:

  * Distributions and histograms aren't supported.

HDF5 stat output can be enabled using the 'h5' URL scheme when
overriding the stat file name on gem5's command line. The following
parameters are supported:

  * chunking (unsigned): Number of time steps to pre-allocate
    (default: 10)

  * desc (bool): Output stat descriptions (default: True)

  * formulas (bool): Output derived stats (default: True)

Example gem5 command line:

./build/ARM/gem5.opt \
  --stats-file="h5://stats.h5?desc=False;formulas=False" \
  configs/example/fs.py

Example Python stat consumer that computes IPC:
  import h5py

  f = h5py.File('stats.h5', 'r')
  group = f['/system/cpu']
  for i, c in zip(group['committedInsts'], group['numCycles']):
      print i, c, i / c

Change-Id: I351c6cbff2fb7bef9012f47876ba227ed288975b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/8121
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>

mem: Convert CommMonitor to the new stat framework

Change-Id: I851c29909f3e6923c0233505a4d0f2d266bc254f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19371
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu: Convert traffic gen to use new stats

Change-Id: Ife690a137c2dcfb6bcc8b22df996c84f0d231618
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19370
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

stats: Add support for partial stat dumps

Add support for partial stat dumps by passing an optional 'root'
keyword argument to m5.stats.dump(). Specifying root slightly changes
the semantics of the dump command. For legacy reasons, gem5 only
allows one stat dump per tick. This is likely a limitation introduced
as a hack to prevent automatic dumping at the end of simulation from
interfering with explicit dumping from a simulation script. This
restriction does not apply when specifying a root. However, these stat
dumps will still prevent an additional stat dump in the same tick with
an unspecified root.

N.B.: This new API /only/ works for new-style stats that have an
explicit hierarchy. Legacy stats will not be dumped if a root is
specified.

Change-Id: Idc8ff448b9f70a796427b4a5231e7371485130b4
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19369
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>

stats: Add support for hierarchical stats

This change makes the stat system aware of the hierarchical nature of
stats. The aim is to achieve the following goals:

  * Make the SimObject hierarchy explicit in the stat system (i.e.,
    get rid of name() + ".foo"). This makes stat naming less fragile
    and makes it possible to implement hierarchical formats like
    XML/HDF5/JSON in a clean way.

  * Make it more convenient to split stats into a separate
    struct/class that can be bound to a SimObject. This makes the
    namespace cleaner and makes stat accesses a bit more obvious.

  * Make it possible to build groups of stats in C++ that can be used
    in subcomponents in a SimObject (similar to what we do for
    checkpoint sections). This makes it easier to structure large
    components.

  * Enable partial stat dumps. Some of our internal users have been
    asking for this since a full stat dump can be large.

  * Enable better stat access from Python.

This changeset implements solves the first three points by introducing
a class (Stats::Group) that owns statistics belonging to the same
object. SimObjects inherit from Stats::Group since they typically have
statistics.

New-style statistics need to be associated with a parent group at
instantiation time. Instantiation typically sets the name and the
description, other parameters need to be set by overriding
Group::regStats() just like with legacy stats. Simple objects with
scalar stats can typically avoid implementing regStats() altogether
since the stat name and description are both specified in the
constructor.

For convenience reasons, statistics groups can be merged into other
groups. This means that a SimObject can create a stat struct that
inherits from Stats::Group and merge it into the parent group
(SimObject). This can make the code cleaner since statistics tracking
gets grouped into a single object.

Stat visitors have a new API to expose the group structure. The
Output::beginGroup(name) method is called at the beginning of a group
and the Output::endGroup() method is called when all stats, and
sub-groups, have been visited. Flat formats (e.g., the text format)
typically need to maintain a stack to track the full path to a stat.

Legacy, flat, statistics are still supported after applying this
change. These stats don't belong to any group and stat visitors will
not see a Output::beginGroup(name) call before their corresponding
Output::visit() methods are called.

Change-Id: I9025d61dfadeabcc8ecf30813ab2060def455648
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19368
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>

mem-ruby: Define BloomFilter namespace

Define a BloomFilter namespace and put all BloomFilter related
code in it.

As a side effect the BloomFilter classes have been renamed to
remove the "BloomFilter" suffix.

Change-Id: I3ee8cc225bf3b820e561c3e25a6bf38e0012e3a8
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18874
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Make H3 inherit from MultiBitSelBloomFilter

Make MultiBitSelBloomFilter a generic BloomFilter that maps
multiple entries to an address, and therefore uses multiple
hash functions. This allows the common functionality of both
filters to be merged into one, since they only differ in the
hash functions being used.

Change-Id: I0984067b710a208715f5f2727b8c4312feb6529b
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18873
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Finish implementing BloomFilter merge

Not all Bloom Filters had their union functionality implemented.
This change adds them.

Change-Id: I86af18d3c5eabd0da8280b57a88789b3af803c04
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18872
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem-ruby: Remove NonCountingBloomFilter

Make BlockBloomFilter accept having a single bitfield, in which
case it behaves exactly as the NonCountingBloomFilter, and thus
the latter can be removed.

Change-Id: I56d96a89290c933293ce434bbe0e8bcd4bbcaa42
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18871
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Make MultiGrainBloomFilter generic

Allow combining any number of Bloom Filters in the MultiGrain.

Change-Id: I73ae33063e1feed731af6f625d2f64245f21df18
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18869
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem-ruby: Parameterize xor bits in BlockBloomFilter

Parameterize bitfield ranges in BlockBloomFilter such that the
hash is applied between masked bitfields of an address.

Change-Id: I008bd873458e9815e98530e308491adb65bb34cb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18870
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

cpu: Make get(Data|Inst)Port return a Port and not a MasterPort.

No caller uses any of the MasterPort specific properties of these
function's return values, so we can instead return a reference to the
base Port class. This makes it possible for the data and inst ports
to be of any port type, not just gem5 style MasterPorts. This makes
life simpler for, for example, systemc based CPUs which might have TLM
ports.

It also makes it possible for any two CPUs which have compatible ports
to be switched between, as long as the ports they use support being
unbound. Unfortunately that does not include TLM or systemc ports which
are bound permanently.

Change-Id: I98fce5a16d2ef1af051238e929dd96d57a4ac838
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20240
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu, mem: Add new getSendFunctional method to the base CPU.

This returns a sendFunctional delegate references which can be used
to send functional accesses directly, or more likely when constructing
a PortProxy subclass. In those cases only the functional capabilities
of those ports are needed so there's no reason to require a full port
which supports all three protocols. Also, this removes the last
remaining use of get(Data|Inst)Port which relies on those returning
a port which supports the gem5 protocols, except the default
implementations of this new function. If a CPU doesn't have
traditional gem5 style ports, it can override this function to
do whatever other behavior is necessary and return its real ports
through get(Data|Inst)Port.

Change-Id: Ide4da81e3bc679662cd85902ba6bd537cce54a53
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20237
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem: Make PortProxy use a delegate for a sendFunctional function.

The only part of the MaserPort the PortProxy uses is the sendFunctional
function which is part of the functional protocol. Rather than require
a MasterPort which comes along with a lot of other mechanisms, this
change slightly adjusts the PortProxy to only require that function
through the use of a delegate. That allows lots of flexibility in how
the actual packet gets sent and what sends it.

In cases where code constructs a PortProxy and passes its constructor
an unbound MasterPort, the PortProxy will create a delegate to the
sendFunctional method on its own.

This should also make it easier for objects which don't have
traditional gem5 style ports, for instance systemc models, to implement
just the little bit of the protocol they need, rather than having to
stub out a whole port class, most of which will be ignored.

Change-Id: I234b42ce050f12313b551a61736186ddf2c9e2c7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20229
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

cpu: Move the instruction port into o3's fetch stage.

That's where it's used, and that avoids having to pass it around using
the top level getInstPort accessor.

Change-Id: I489a3f3239b3116292f3dcd78a3945fb468c6311
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20239
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu: Move O3's data port into the LSQ.

That's where it's used, and putting it there avoids having to pass
around the port using the top level getDataPort function.

Change-Id: I0dea25d0c5f4bb3f58a6574a8f2b2d242784caf2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20238
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem: Eliminate the Base(Slave|Master)Port classes.

The Port class has assumed all the duties of the less generic
Base*Port classes, making them unnecessary. Since they don't add
anything but make the code more complex, this change eliminates them.

Change-Id: Ibb9c56def04465f353362595c1f1c5ac5083e5e9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20236
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

cpu, dev, mem: Use the new Port methods.

Use getPeer, takeOverFrom, and << to simplify the use of ports in some
areas.

Change-Id: Idfbda27411b5d6b742f5e4927894302ea6d6a53d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20235
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim: Add a << overload for the Port class which prints its name.

This makes it easier/less verbose to print the name of a port, it's
most important and identifying feature, in a DPRINTF or other stream
based output.

Change-Id: I050d102844612577f9a83d550e619736507a6781
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20234
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim: Add a takeOverFrom method to the base Port class.

This makes it easier, safer, and less verbose to swap out ports when
a CPU takes over for another CPU, for instance.

Change-Id: Ice08e4dcb4b04dc66b1841331092a78b4f6f5a96
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20233
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem, sim, systemc: Reorganize Port and co.s bind, unbind slightly.

The base Port class can keep track of its peer, and also whether it's
connected. This is partially delegated away from the port subclasses
which still keep track of a cast version of their peer pointer for
their own conveneince, so that it can be used by generic code. Even
with the Port mechanism's new flexibility, each port still has
exactly one peer and is either connected or not based on whether there
is a peer currently.

Change-Id: Id3228617dd1604d196814254a1aadeac5ade7cde
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20232
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev-arm: Fix GICv3 ITS indexing error

Table walks were not considering the entry size when evaluating
the address.

Change-Id: Ica6bf6d88632985ee8ed120448b32e0f7e918a8a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20329
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Fix GITS_BASER initialization/access

The patch is fixing/improving GITS_BASER registers initialization.

* Not using reserved table types anymore (GITS_BASER.TYPE)
* Using write mask for handling WI bits

Change-Id: Ibe24667fdf22b42b86496167c19fc00bbb0ba191
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20328
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

arch-riscv: fix GDB register cache

Fixes the definition of the RISC-V GDB register cache. The latest
version, of RISC-V gdb, commit c3eb4078520dad8234ffd7fbf893ac0da23ad3c8,
appears to only accept the 32 integer registers + the PC in the 'g'
packet.

This functions with the Linux toolchain (riscv64-unknown-linux-gnu-*),
but works best with the Newlib toolchain (riscv64-unknown-elf-*).

Change-Id: Ie35ea89a45870fb634e6c68236261bde27c86e41
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20028
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Put gem5 protocols in their own directory.

This reduces clutter in the src/mem directory, and makes it clear that
those protocols are for the classic gem5 memory system, not ruby, TLM,
etc.

Change-Id: I6cf6b21134d82f4f01991e4fe92dbea8c7e82081
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20231
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem: Move ruby protocols into a directory called ruby_protocol.

Now that the gem5 protocols are split out, it would be nice to put them
in their own protocol directory. It's also confusing to have files
called *_protocol which are not in the protocol directory.

Change-Id: I7475ee111630050a2421816dfd290921baab9f71
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20230
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>

mem: Split the various protocols out of the gem5 master/slave ports.

This makes the protocols easier to see in their entirity, and makes it
easier to add a new type of port which only supports the functional
protocol.

Change-Id: If5d639bef45062f0a23af2ac46f50933e6a8f144
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20228
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

mem-ruby: fix build with PROTOCOL=MOESI_hammer

Was failing with:

Error: Unrecognized variable: l1i_victim_addr

since: I2c43f22aba5af3a57e54b1c435e5d3fbba86d1d5

Change-Id: I7df666acb724ee541804dd7557753a9ba4005516
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20261
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Start using GITS_CTLR.quiescent bit

The GITS_CTLR.quiescent bit is used by priviledged sw to check when the
ITS has finished draining its state (all pending translations/table
walks have ended) once it has been disabled (by setting the
GITS_CTLR.enable bit to 0).
This patch is modelling this behaviour by

* Changing the reset state to enable=0, quiescent=1
* Making the GITS_CTLR.quiescent bit RO
* Updating the bit once a new translation/command is being processed
(quiescent=0) and when there are no pending translation/commands
(quiescent=1)

Change-Id: I7cfe94b25d603400364b1cdfc2d2397acf5dfad8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20257
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm: Allow 32 bit accesses to GITS_C(WRITER/READR/BASER)

For those registers (GITS_CWRITER, GITS_READR and GITS_CBASER)
Bits [63:32] and bits [31:0] are accessible separately.

Change-Id: Ibf60b5e4fd20efb21a63570e6012862e37946877
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20256
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>

dev-arm,system-arm: missing GICv3 ranges property

This patch adds the device tree "ranges" property to GICv3 for
the VExpress_GEM5_V2 platform. It is also included in the GICv3 DTB
auto generation.
This allows the GICv3 ITS to be specified in the device tree.

Change-Id: I00e1bb0fd45521e34820c0a23ddf047afec7aa4c
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20255
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>