configs/qemu_sh4*: rename back the linux config file to linux-4.9.config

In commit 28d97609b25cb534a55b6cf6b1945428e817c54a ("configs/qemu:
bump to the latest kernel version") updated most qemu defconfigs to
use Linux 4.11. However, for the SH4 configurations, Linux 4.9 was
kept, because 4.11 apparently has an issue.

Unfortunately, while the defconfigs for SH4 were unchanged, the Linux
kernel configuration file was renamed from linux-4.9.config to
linux-4.11.config.

This commit renames the Linux configuration files back to their
previous name, linux-4.9.config, matching what the Qemu SH4 defconfigs
specify.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: move nanopi-neo under friendlyarm

As the vendor folder friendlyarm is created, move board nanopi-neo
also under vendor folder.

Signed-off-by: Chakra Divi <chakra@openedev.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kvazaar: new package

Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.

website: http://ultravideo.cs.tut.fi/

Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freeswitch: bump version to 1.6.18

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libunwind: bump version to 1.2.1

Backported patch from master branch which implements --disable-tests
configure option, removed original patch 0001, added _CONF_OPTS.

Removed patch 0003, applied upstream:
https://github.com/libunwind/libunwind/commit/f1684379dfaf8018d5d4c1945e292a56d0fab245

Added upstream patch to fix musl build.

Tested using this defconfig

BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_LTRACE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_WESTON=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_LIBJPEG=y
BR2_PACKAGE_LIBUNWIND=y

with test-pkg

                armv5-ctng-linux-gnueabi [ 1/49]: OK
              armv7-ctng-linux-gnueabihf [ 2/49]: OK
                        br-aarch64-glibc [ 3/49]: SKIPPED
                           br-arcle-hs38 [ 4/49]: SKIPPED
                            br-arm-basic [ 5/49]: SKIPPED
                  br-arm-cortex-a9-glibc [ 6/49]: OK
                   br-arm-cortex-a9-musl [ 7/49]: SKIPPED
                   br-arm-cortex-m4-full [ 8/49]: SKIPPED
                             br-arm-full [ 9/49]: OK
                    br-arm-full-nothread [10/49]: SKIPPED
                      br-arm-full-static [11/49]: SKIPPED
                            br-bfin-full [12/49]: SKIPPED
                   br-i386-pentium4-full [13/49]: SKIPPED
                br-i386-pentium-mmx-musl [14/49]: SKIPPED
                       br-m68k-5208-full [15/49]: SKIPPED
                      br-m68k-68040-full [16/49]: SKIPPED
                    br-microblazeel-full [17/49]: SKIPPED
                 br-mips32r6-el-hf-glibc [18/49]: OK
                      br-mips64-n64-full [19/49]: SKIPPED
                 br-mips64r6-el-hf-glibc [20/49]: SKIPPED
                      br-mipsel-o32-full [21/49]: OK
                          br-nios2-glibc [22/49]: SKIPPED
                      br-openrisc-uclibc [23/49]: SKIPPED
               br-powerpc-603e-basic-cpp [24/49]: SKIPPED
             br-powerpc64le-power8-glibc [25/49]: SKIPPED
               br-powerpc64-power7-glibc [26/49]: SKIPPED
                  br-powerpc-e500mc-full [27/49]: SKIPPED
                             br-sh4-full [28/49]: SKIPPED
                        br-sparc64-glibc [29/49]: SKIPPED
                         br-sparc-uclibc [30/49]: SKIPPED
                    br-x86-64-core2-full [31/49]: OK
                          br-x86-64-musl [32/49]: SKIPPED
                          br-xtensa-full [33/49]: SKIPPED
                     i686-ctng-linux-gnu [34/49]: OK
                          linaro-aarch64 [35/49]: SKIPPED
                              linaro-arm [36/49]: OK
             mips64el-ctng_n32-linux-gnu [37/49]: SKIPPED
             mips64el-ctng_n64-linux-gnu [38/49]: SKIPPED
        powerpc-ctng_e500v2-linux-gnuspe [39/49]: OK
                     sourcery-arm-armv4t [40/49]: OK
                            sourcery-arm [41/49]: OK
                     sourcery-arm-thumb2 [42/49]: OK
                         sourcery-mips64 [43/49]: SKIPPED
                           sourcery-mips [44/49]: OK
                          sourcery-nios2 [45/49]: SKIPPED
                             sourcery-sh [46/49]: SKIPPED
                         sourcery-x86-64 [47/49]: OK
                            sourcery-x86 [48/49]: OK
           x86_64-ctng_locales-linux-gnu [49/49]: OK

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: bump to version 2.30

- Update the "basic set" description to include fincore, which is built
  by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libbluray: fix build when host has no java support

Fixes
http://autobuild.buildroot.net/results/630/630cfe62798d0f35fdfaed8547038ba7673cc149/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imagemagick: bump version to 7.0.6-0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/imagemagick: change download url to github

Upstream quickly removes old versions from
http://www.imagemagick.org/download/releases

For our LTS versions we should switch to a stable upstream repo which
provides all released versions.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{1, 4, 9, 11}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default version to 4.11.6

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-idna: bump version to 2.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: Add support for i.MX SDMA

Allow the i.MX SDMA firmwares to be installed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: Bump to the latest version

Update to commit ec58d9aaf3.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cjson: bump to version 1.5.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dropwatch: bump to master and fix site

The tool was hosted at fedorahosted.org which was shut down in early
2017. According to a private conversation with the upstream maintainer,
the new home for this tool is on infradead.org so far. So the SITE was
adapted accordingly.

Additionally the version was bumped from 1.4 to current master. This
allows to drop one build patch. The other patches were recreated with
Git.

Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: always pass --with-platforms

If --with-platforms is not used mesa3d defaults to x11:
https://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=17.1#n1641
https://cgit.freedesktop.org/mesa/mesa/tree/configure.ac?h=17.1#n1659

This will break configure when x11 is not needed because the defconfig
has no mesa3d drivers enabled. To solve the problem we always pass
--with-platforms, even with empty values and also for non-egl builds.

Fixes
http://autobuild.buildroot.net/results/d16/d16b39d16b5bee5c09b1e996941a275a4337c3c1/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: rename MESA3D_EGL_PLATFORMS to MESA3D_PLATFORMS

No code changes, this patch prepares for updates to platform handling
after upstream deprecated --with-egl-platforms in favour of
--with-platforms
https://cgit.freedesktop.org/mesa/mesa/commit/?h=17.1&id=7748c3f5eb1d98ca97d2cf6e516ff54a5d75130a

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scanpypi: fix comment typo

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pandaboard_defconfig: bump u-boot to 2017.05 to fix build with gcc 6

The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.

Fix the build by bumping u-boot to 2017.05.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libbluray: bump version to 1.0.1

Removed configure options --enable-udf --disable-bdjava, they were
removed upstream:

http://git.videolan.org/?p=libbluray.git;a=commitdiff;h=dec9a6bcf17e8ca34b3b2e3eab632a6e03832e8c
http://git.videolan.org/?p=libbluray.git;a=commitdiff;h=415da3663a1ff2a935d4a36417f4f46bf2b947d2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openblocks_a6_defconfig: improve/fix configuration

The board has an ethernet interface, so enable DHCP for it.

The used flash chip uses 16K erase blocks, so use that for JFFS2:

mtdinfo -a
..
mtd5
Name:                           user
Type:                           nand
Eraseblock size:                16384 bytes, 16.0 KiB
Amount of eraseblocks:          1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size:                  256 bytes
OOB size:                       16 bytes
Character device major/minor:   90:10
Bad blocks are allowed:         true
Device is writable:             true

While we're at it, add a readme explaining how to build and upload the build
to the board.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openblocks_a6_defconfig: bump to linux-4.11.5 to fix build with gcc 6

The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.

Fix the build by bumping the kernel to 4.11.5.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

janus-gateway: bump to version 0.2.3

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-ipython: Bump to version 5.4.0

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-ipython: Add dependecy list

List minimal set of packages needed to be installed alongside to be able
to run IPython 5.2.2 with Python 2/3.

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: use alphabetic ordering.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-backports-shutil-get-terminal-size: New package

Add 'python-backports-shutil-get-terminal-size'[1] package to
buildroot. Needed by IPython when building against Python2.

[1] https://pypi.python.org/pypi/backports.shutil_get_terminal_size

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-pickleshare: New package

Add 'pickleshare'[1] package to buildroot. Needed by IPython.

[1] https://pypi.python.org/pypi/pickleshare

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-pathlib2: New package

Add 'pathlib2'[1] package to Buildroot. Needed by 'pickleshare'
package, which is added in the next patch.

[1] https://pypi.python.org/pypi/pathlib2

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-scandir: New package

Add 'scandir'[1] package to buildroot. Needed by 'pathlib2'.

[1] https://pypi.python.org/pypi/scandir

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-traitlets: New package

Add 'traitlets'[1] package to Buildroot. Needed by IPython.

[1] https://pypi.python.org/pypi/traitlets

Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arm-trusted-firmware: cleanup make target handling

ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.

Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glmark2: Fix segmentation fault

Running glmark2 on imx6 with kernel 4.11.4 and Mesa 17.1.2 leads to
a segmentation fault.

Apply Lucas Stach's patch to fix the problem while upstream glmark2
doesn't get fixed.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-paramiko: sort runtime dependencies in alphabetical order

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scancpan: refactor with $mirror

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scancpan: refactor with MetaCPAN::API source()

instead of get_manifest()

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scancpan: update with MetaCPAN API v1

The API v0 is shutdown.
see https://bugs.busybox.net/show_bug.cgi?id=9951

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-setuptools: bump to version 36.0.1

Recent setuptools versions require bootstrap.py to be invoked
before the standard setup process. So create such pre configure
hooks for both host and target versions.

Change download location to GitHub because setuptools doesn't
provide *.tar.gz any longer.

Fix legal info. setuptools is now licensed under MIT licence.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cffi: bump to version 1.10.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: module context affected by GCC bug 64735

Building boosts module context is affected by GCC bug 64735 [1]:

```
./boost/context/execution_context_v2.hpp:298:31: error: 'exception_ptr' is not a member of 'std'
     auto p = std::make_tuple( std::exception_ptr{}, std::move( data) );
```

This is because `exception_ptr` from libstdc++ is not available for
architectures not supporting always lock-free atomic ints.

Note, that this bug is fixed in GCC 7.

Fixes:
http://autobuild.buildroot.net/results/f4e/f4e8a3727f19f7df4a1c45efe3603422fafd4af5/

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64735

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnss: bump to version 3.31

Fixes build with gcc 7.

https://hg.mozilla.org/projects/nss/rev/0dca14409fef

Fixes:
http://autobuild.buildroot.net/results/b71/b71e4e003ec5753708a07cfd04e3025c93f80e67/
http://autobuild.buildroot.net/results/66d/66d31923824d34df3b20a363a1346df1c00ae222/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnspr: bump to version 4.15

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libwebsockets: bump to version 2.2.1

Also remove patch, as it was committed upstream.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zynq_zc706: bump to U-Boot xilinx-v2017.1 (fix build)

The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.

Fixes:
  In file included from include/linux/compiler.h:54:0,
                   from include/linux/bitops.h:5,
                   from ./include/common.h:20:
  include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
   #include gcc_header(__GNUC__)
                                ^
  compilation terminated.

[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zynq_microzed: bump to U-Boot xilinx-v2017.1 (fix build)

The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.

Fixes:
  In file included from include/linux/compiler.h:54:0,
                   from include/linux/bitops.h:5,
                   from ./include/common.h:20:
  include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
   #include gcc_header(__GNUC__)
                                ^
  compilation terminated.

[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zynq_zed: bump to U-Boot xilinx-v2017.1 (fix build)

The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb20682bb98e6d738e5f7c909415ae07 ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.

Fixes:
  In file included from include/linux/compiler.h:54:0,
                   from include/linux/bitops.h:5,
                   from ./include/common.h:20:
  include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
   #include gcc_header(__GNUC__)
                                ^
  compilation terminated.

[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zynq_zc706: remove duplicated line in defconfig

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

printvars: remove "Nothing to be done for 'printvars'."

When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.

To avoid this, make sure there is a shell command by adding :.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

doc-asciidoc: add missing .PHONY declarations

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: add missing PHONY targets

Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: declare targets PHONY where they are defined

Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:

- it is more difficult to see if a target is missing from PHONY;

- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
  but some of these targets are also defined when there is no .config;
  in that case, these targets are not declared as PHONY.

Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.

The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: use pattern for manual-% in noconfig_targets

This simplifies the variable a little

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: document noconfig_targets variable

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: remove 'toolchain' from .PHONY

toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/pc_x86_64_{bios,efi}_defconfig: use custom linux config

Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.

Instead use a custom linux config for the pc defconfigs.  With this, we also
can get rid of the fragment file containing the delta fra the qemu config.

Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/pc_x86_64_{bios, efi}_defconfig: unbreak after qemu bump to linux-4.11

The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b25
(configs/qemu: bump to the latest kernel version), breaking the build.

Fix it by also moving them to linux-4.11.x.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpth: fix license info

NEWS states:
* Change license from LGPLv3+/GPLv2+ to LGPLv2+.

Fixes:
http://autobuild.buildroot.net/results/bef/bef969ede5fc792b0a03f5669071600a0f746a7a/
http://autobuild.buildroot.net/results/2d5/2d59b8e6d69b70c621ff2031a9c4fd9e67ef13cf/
http://autobuild.buildroot.net/results/631/6318505c8e293e6c00b20eec39d851d0d15f6fec/

[Peter: also adjust _LICENSE, extend commit message]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnpth: bump to version 1.5

Switch to HTTPS for better corporate firewall compliance.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: switch to https download location

HTTPS works better behind certain corporate firewalls.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: security bump to version 3.5.13

Fixes CVE-2017-7507: decoding a status request TLS extension that has a
non-empty responder IDs list could lead to a crash due to a null pointer
dereference.

https://lists.gnupg.org/pipermail/gnutls-devel/2017-June/008446.html

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9, 11}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default version to 4.11.5

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/misc/target-dir-warning.txt: fix typo

s/owernship/ownership/

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-paramiko: bump to version 2.2.0

Add new runtime dependencies bcrypt and pynacl.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: Add patch to build efi/wrapper with the host toolchain

The 'wrapper' tool built by syslinux is executed on the build machine,
so it should be built with CC_FOR_BUILD.

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-bcrypt: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libspatialindex: new package

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/erlang-p1-xmpp: add missing dependency on C++ from erlang-p1-stringprep

This package selects erlang-p1-stringprep, which depends on
BR2_INSTALL_LIBSTDCPP. Thus, it should also depend on this item.

Fixes:

  http://autobuild.buildroot.net/results/fe76971fead52acdd64612161e92a48a4ad36572/

Signed-off-by: Johan Oudinet <johan.oudinet@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

.gitlab-cy.yml: refresh

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: Add support for Engicam i.CoreM6 Quad/Dual boards

Add initial support for Engicam i.CoreM6 Quad/Dual board
with below features:
- U-Boot 2017.05
- Linux 4.11
- Default packages from buildroot

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docker-engine: bump to version 17.05.0-ce

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: fix musl build error

To reproduce the build error use this defconfig:

BR2_x86_64=y
BR2_x86_atom=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-x86-64-musl-2017.02-744-g40962a0.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_5=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_10=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I915=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OSMESA=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_MESA3D_OPENGL_TEXTURE_FLOAT=y
BR2_PACKAGE_XORG7=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update to 1.0.25

Mostly bugfixing and cleanups. Both patches integrated.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mcelog: fix legal-info

README was renamed to README.md
https://git.kernel.org/pub/scm/utils/cpu/mce/mcelog.git/commit/README.md?id=2fda0091a0628480a08cbf6ebe309fcb83aeae34

Fixes
http://autobuild.buildroot.net/results/02b/02b897a843b995bf5bf3f993f48689870a551dd5/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docker-containerd: bump to version 9048e5e50717ea4497b757314bad98ea3763c145

This is a runtime dependency of docker-engine in version 17.05.0-ce

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lsscsi: add new package

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - add entry to DEVELOPERS file
 - use SPDX license code
 - license is GPL-2.0+, not GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gdb: add support for gdb 8.0

Add a dependency on gcc >= 4.8 since gdb needs a C++11 compiler.

Remove included patch since 7.12.1:
0001-Remove-const-in-xtensa-linux-nat.c-fetch_gregs.patch
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=d274ecf4ddf76768af57e27f654b9ce6784b391c

Rebase remaining patches:
0002-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch
0003-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch

See https://sourceware.org/ml/gdb-announce/2017/msg00003.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdb: fix build of gdbserver on m68k/coldfire

This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:

../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
       child_pid = clone (function, child_stack + STACK_SIZE,
                   ^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
     CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
     ^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in

Thanks to Waldemar for pointing out the patch fixing this issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - None
Changes since v1:
 - New patch in the series

uclibc: properly set UCLIBC_HAS_MMU option

gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - None
Changes since v1:
 - New patch in the series

gcc: add patch to support musl on SuperH in gcc 5.x

Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).

This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.

The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - None
Changes since v1:
 - New patch in the series

gdb: add patches to fix musl build on ppc(64)(le) and sh

This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.

The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:

  http://www.openwall.com/lists/musl/2017/06/03/1

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - None
Changes since v1:
 - None

gdb: not available on ARM noMMU and OpenRISC

Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
 - Fixed BR2_openrisc to BR2_or1k

gdb: introduce BR2_PACKAGE_GDB_ARCH_SUPPORTS

Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
 - None
Changes since v1:
 - None

package/lcdproc: override libpng-config path

Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.

configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'

Fixes
http://autobuild.buildroot.net/results/b68/b68f54404a7d412d639ebb6d052412eea6ee3bf1/lcdproc-0.5.7/config.log

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lcdproc: override freetype-config path

freetype-config from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.

checking if freetype support has been enabled... yes
checking for freetype-config... /usr/bin/freetype-config
checking for FreeType -- version >= 7.0.1... cross compiling; assuming OK... yes

Fixes:
http://autobuild.buildroot.net/results/c7c/c7c52cd56b985fd73434d5997e9a6ab3f7d7e71e

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linuxptp: new package

Add the Linux PTP Project package.
http://linuxptp.sourceforge.net/

The SysV and systemd init scripts start the daemon in slave-only mode on eth0
and synchronize the system clock to PTP.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt: enable static build for BR2_PACKAGE_QT_MOUSE_TSLIB

The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since

   commit 05fadfea1 ("package/tslib: enable statically linked building")

it does and we can remove this dependecy.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/directfb: enable static build for BR2_PACKAGE_DIRECTFB_TSLIB

The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since

   commit 05fadfea1 ("package/tslib: enable statically linked building")

it does and we can remove this dependecy.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5base: enable static build for BR2_PACKAGE_QT5BASE_TSLIB

The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since

   commit 05fadfea1 ("package/tslib: enable statically linked building")

it does and we can remove this dependecy.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

intltool: add patch to fix compatibility with Perl 5.26

When Perl 5.26 is installed on the host, building some packages like
avahi fail, because of intltool-update:

```
Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/^(.*)\${ <-- HERE ?([A-Z_]+)}?(.*)$/ at $BUILDROOT/host/usr/bin/intltool-update line 1065.
```

Apparently, this has been a warning before Perl 5.26, but now it is an
error.

Fetch from:
https://github.com/Alexpux/MSYS2-packages/blob/master/intltool/perl-5.22-compatibility.patch

Reported upstream:
https://bugs.launchpad.net/intltool/+bug/1696658

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: add patches to build with the latest gnu-efi release

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: add missing dependency on host-util-linux

If util-linux is not installed system-wide on the host, the build
fails with:

/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes  -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
 #include <uuid/uuid.h>
                       ^
compilation terminated.

Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:

$ readelf -d output/host/usr/bin/isohybrid

Dynamic section at offset 0x3e00 contains 26 entries:
  Tag        Type                         Name/Value
 0x0000000000000001 (NEEDED)             Shared library: [libuuid.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.6]
 0x000000000000000f (RPATH)              Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-ipython-genutils: New package

Add 'ipython_genutils'[1] package to Buildroot. Needed by 'traitlets'.

[1] https://pypi.python.org/pypi/ipython_genutils

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: take into account comments made by Yegor:
 - fix alphabetic ordering in the DEVELOPERS file
 - fix comment in hash file
 - add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-simplegeneric: Switch setup type to 'setuptools'

Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: Add missing closing angle bracket to my e-mail

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/trace-cmd: bump version to 2.6.1, add hash

Removed patch applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mcelog: bump version to 152, add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-bt-firmware: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/netsurf-buildsystem: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libsvgtiny: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>