Daily bump.

CFI-handling : Add a hook to allow target-specific Personality and LSDA indirections.

At present, the output of .cfi_personality and .cfi_lsda assumes
ELF semantics for indirections.  This isn't suitable for all targets
and is one blocker to moving Darwin to use .cfi_xxxx.

The patch adds a target hook that allows non-ELF targets to use
indirections appropriate to their needs.

gcc/ChangeLog:

* config/darwin-protos.h (darwin_make_eh_symbol_indirect): New.
* config/darwin.c (darwin_make_eh_symbol_indirect): New. Use
Mach-O semantics for personality and ldsa indirections.
* config/darwin.h (TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT): New.
* doc/tm.texi: Regenerate.
* doc/tm.texi.in: Add TARGET_ASM_MAKE_EH_SYMBOL_INDIRECT hook.
* dwarf2out.c (dwarf2out_do_cfi_startproc): If the target defines
a hook for indirecting personality and ldsa references, use that
otherwise default to ELF semantics.
* target.def (make_eh_symbol_indirect): New target hook.

Objective-C++ : Allow prefix attrs on linkage specs.

For Objective-C++, this combines prefix attributes from before and
after top level linkage specs.  The "reference implementation" for
Objective-C++ allows this, and system headers depend on it.

e.g.

__attribute__((__deprecated__))
extern "C" __attribute__((__visibility__("default")))
@interface MyClass
...
@end

Would consider the list of prefix attributes to the interface for
MyClass to include both the visibility and deprecated ones.

When we are compiling regular C++, this emits a warning and discards
any prefix attributes before a linkage spec.

gcc/cp/ChangeLog:

* parser.c (cp_parser_declaration): Unless we are compiling for
Ojective-C++, warn about and discard any attributes that prefix
a linkage specification.

c++: Change the mangling of __alignof__ [PR88115]

This patch changes the mangling of __alignof__ to v111__alignof__,
making its mangling distinct from that of alignof(type) and
alignof(expr).

How we mangle ALIGNOF_EXPR now depends on its ALIGNOF_EXPR_STD_P flag,
which after the previous patch gets consistently set for alignof(type)
as well as alignof(expr).

gcc/c-family/ChangeLog:

PR c++/88115
* c-opts.c (c_common_post_options): Update latest_abi_version.

gcc/ChangeLog:

PR c++/88115
* common.opt (-fabi-version): Document =15.
* doc/invoke.texi (C++ Dialect Options): Likewise.

gcc/cp/ChangeLog:

PR c++/88115
* mangle.c (write_expression): Mangle __alignof_ differently
from alignof when the ABI version is at least 15.

libiberty/ChangeLog:

PR c++/88115
* cp-demangle.c (d_print_comp_inner)
<case DEMANGLE_COMPONENT_EXTENDED_OPERATOR>: Don't print the
"operator " prefix for __alignof__.
<case DEMANGLE_COMPONENT_UNARY>: Always print parens around the
operand of __alignof__.
* testsuite/demangle-expected: Test demangling for __alignof__.

gcc/testsuite/ChangeLog:

PR c++/88115
* g++.dg/abi/macro0.C: Adjust.
* g++.dg/cpp0x/alignof7.C: New test.
* g++.dg/cpp0x/alignof8.C: New test.

c++: Correct the handling of alignof(expr) [PR88115]

We're currently neglecting to set the ALIGNOF_EXPR_STD_P flag on an
ALIGNOF_EXPR when its operand is an expression.  This leads to us
handling alignof(expr) as if it were written __alignof__(expr), and
returning the preferred alignment instead of the ABI alignment.  In the
testcase below, this causes the first and third static_assert to fail on
x86.

gcc/cp/ChangeLog:

PR c++/88115
* cp-tree.h (cxx_sizeof_or_alignof_expr): Add bool parameter.
* decl.c (fold_sizeof_expr): Pass false to
cxx_sizeof_or_alignof_expr.
* parser.c (cp_parser_unary_expression): Pass std_alignof to
cxx_sizeof_or_alignof_expr.
* pt.c (tsubst_copy): Pass false to cxx_sizeof_or_alignof_expr.
(tsubst_copy_and_build): Pass std_alignof to
cxx_sizeof_or_alignof_expr.
* typeck.c (cxx_alignof_expr): Add std_alignof bool parameter
and pass it to cxx_sizeof_or_alignof_type.  Set ALIGNOF_EXPR_STD_P
appropriately.
(cxx_sizeof_or_alignof_expr): Add std_alignof bool parameter
and pass it to cxx_alignof_expr.  Assert op is either
SIZEOF_EXPR or ALIGNOF_EXPR.

libcc1/ChangeLog:

PR c++/88115
* libcp1plugin.cc (plugin_build_unary_expr): Pass true to
cxx_sizeof_or_alignof_expr.

gcc/testsuite/ChangeLog:

PR c++/88115
* g++.dg/cpp0x/alignof6.C: New test.

c++: Tweak tsubst_qualified_id location.

Retain the location when tsubstituting a qualified-id so that our
static_assert diagnostic can benefit.  Don't create useless location
wrappers for temporary variables.

gcc/ChangeLog:

PR c++/97518
* tree.c (maybe_wrap_with_location): Don't add a location
wrapper around an artificial and ignored decl.

gcc/cp/ChangeLog:

PR c++/97518
* pt.c (tsubst_qualified_id): Use EXPR_LOCATION of the qualified-id.
Use it to maybe_wrap_with_location the final expression.

gcc/testsuite/ChangeLog:

PR c++/97518
* g++.dg/diagnostic/static_assert3.C: New test.

Fix PRE NEW_SETS guarding

Accesses to NEW_SETS should be properly guarded.  Committed
as obvious.

2020-11-11  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97623
* tree-ssa-pre.c (create_expression_by_pieces): Guard
NEW_SETS access.
(insert_into_preds_of_block): Likewise.

libstdc++: Exclude cygwin and mingw from linker relro support

PE format does not have ELF style relro linker support, exclude
from checking. If the host linker supports ELF format, configure
may get confused.

libstdc++-v3/ChangeLog:

* acinclude.m4 (GLIBCXX_CHECK_LINKER_FEATURES): Exclude
cygwin and mingw from relro linker test.
* configure: Regenerate.

Fix PRE topological expression set sorting

This fixes sorted_array_from_bitmap_set to do a topological sort
as required by re-using what PHI-translation does, namely a DFS
walk with the help of bitmap_find_leader.  The proper result
is verified by extra checking in clean () (which would have tripped
before) and for the testcase I'm working at during the last
patches (PR97623) it is neutral in compile-time cost.

2020-11-11  Richard Biener  <rguenther@suse.de>

* tree-ssa-pre.c (pre_expr_DFS): New function.
(sorted_array_from_bitmap_set): Use it to properly
topologically sort the expression set.
(clean): Verify we've cleaned everything we should.

testsuite: Fix up scan-tree-dump-times regexps for 64-bit targets

The added (?:_ull) match on 32-bit targets, but are equivalent to just
adding _ull into the strings, i.e. require the _ull substrings, while
the intent is that they are optional, so we should use (?:_ull)? instead.

2020-11-11  Jakub Jelinek  <jakub@redhat.com>

* gfortran.dg/gomp/workshare-reduction-3.f90: Use (?:_ull)? instead
of (?:_ull) in the scan-tree-dump-times directives.
* gfortran.dg/gomp/workshare-reduction-26.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-27.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-28.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-36.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-37.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-38.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-39.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-40.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-41.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-42.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-43.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-44.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-45.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-46.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-47.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-56.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-57.f90: Likewise.

Remove superfluous call to Base_Type

gcc/ada/ChangeLog:
* gcc-interface/gigi.h: Remove ^L characters throughout.
* gcc-interface/decl.c: Likewise.
* gcc-interface/utils.c: Likewise.
* gcc-interface/utils2.c: Likewise.
* gcc-interface/trans.c (gnat_to_gnu) <N_Allocator>: Do not explicitly
go to the base type for the Has_Constrained_Partial_View flag.

Fix biased integer arithmetic

The Ada compiler uses a biased representation when a size clause reserves
fewer bits than normal either for the lower or for the upper bound.

gcc/ada/ChangeLog:
* gcc-interface/trans.c (build_binary_op_trapv): Convert operands
to the result type before doing generic overflow checking.

gcc/testsuite/ChangeLog:
* gnat.dg/bias2.adb: New test.

Fix segfault on elaboration of empty 1-element array at -O

This is a rather obscure case where the elaboration of an empty array
whose base type is an array type of length at most 1 goes awry when
the code is compiled with optimization.

gcc/ada/ChangeLog:
* gcc-interface/trans.c (can_be_lower_p): Remove.
(Regular_Loop_to_gnu): Add ENTRY_COND unconditionally if
BOTTOM_COND is non-zero.

gcc/testsuite/ChangeLog:
* gnat.dg/opt89.adb: New test.

Fix internal error on chain of constants with -gnatc

gcc/ada/ChangeLog:
* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Constant>: In case
the constant is not being defined, get the expression in type
annotation mode only if its type is elementary.

Fix internal error with Shift_Right operator on signed type

This is a regression present on the mainline and 10 branch in the form
of an ICE with a shift operator applied to a variable of a signed type,
and which is caused by a type mismatch.

gcc/ada/ChangeLog:
* gcc-interface/trans.c (gnat_to_gnu) <N_Op_Shift>: Also convert
GNU_MAX_SHIFT if the type of the operation has been changed.
* gcc-interface/utils.c (can_materialize_object_renaming_p): Add
pair of missing parentheses.

gcc/testsuite/ChangeLog:
* gnat.dg/shift1.adb: New test.

testsuite/97797 - adjust GIMPLE tests for sizetype

Tested on x86_64-unknown-linux-gnu, pushed.

2020-11-11  Richard Biener  <rguenther@suse.de>

PR testsuite/97797
* gcc.dg/torture/ssa-fre-5.c: Use __SIZETYPE__ where
appropriate.
* gcc.dg/torture/ssa-fre-6.c: Likewise.

tree-optimization/97623 - Avoid PRE hoist insertion iteration

The recent previous change in this area limited hoist insertion
iteration via a param but the following is IMHO better since
we are not really interested in PRE opportunities exposed by
hoisting but only the other way around.  So this moves hoist
insertion after PRE iteration finished and removes hoist
insertion iteration alltogether.

2020-11-11  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97623
* params.opt (-param=max-pre-hoist-insert-iterations): Remove
again.
* doc/invoke.texi (max-pre-hoist-insert-iterations): Likewise.
* tree-ssa-pre.c (insert): Move hoist insertion after PRE
insertion iteration and do not iterate it.

* gcc.dg/tree-ssa/ssa-hoist-3.c: Adjust.
* gcc.dg/tree-ssa/ssa-hoist-7.c: Likewise.
* gcc.dg/tree-ssa/ssa-pre-30.c: Likewise.

aarch64: Support SVE comparisons for unpacked integers

This patch adds support for comparing unpacked SVE integer vectors,
such as byte elements stored in the bottom bytes of halfword
containers.  It also adds support for selects between unpacked
SVE vectors (both integer and floating-point), since selects and
compares are closely tied via the vcond optab interface.

gcc/
* config/aarch64/aarch64-sve.md (@vcond_mask_<mode><vpred>): Extend
from SVE_FULL to SVE_ALL.
(*vcond_mask_<mode><vpred>): Likewise.
(@aarch64_sel_dup<mode>): Likewise.
(vcond<SVE_FULL:mode><v_int_equiv>): Extend to...
(vcond<SVE_ALL:mode><SVE_I:mode>): ...this, but requiring the
sizes of the container modes to match.
(vcondu<SVE_FULL:mode><v_int_equiv>): Extend to...
(vcondu<SVE_ALL:mode><SVE_I:mode>): ...this.
(vec_cmp<SVE_FULL_I:mode><vpred>): Extend to...
(vec_cmp<SVE_I:mode><vpred>): ...this.
(vec_cmpu<SVE_FULL_I:mode><vpred>): Extend to...
(vec_cmpu<SVE_I:mode><vpred>): ...this.
(@aarch64_pred_cmp<cmp_op><SVE_FULL_I:mode>): Extend to...
(@aarch64_pred_cmp<cmp_op><SVE_I:mode>): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_cc): Extend to...
(*cmp<cmp_op><SVE_I:mode>_cc): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_ptest): Extend to...
(*cmp<cmp_op><SVE_I:mode>_ptest): ...this.
(*cmp<cmp_op><SVE_FULL_I:mode>_and): Extend to...
(*cmp<cmp_op><SVE_I:mode>_and): ...this.

gcc/testsuite/
* gcc.target/aarch64/sve/cmp_1.c: New test.
* gcc.target/aarch64/sve/cmp_2.c: Likewise.
* gcc.target/aarch64/sve/cond_arith_1.c: Add --param
aarch64-sve-compare-costs=0
* gcc.target/aarch64/sve/cond_arith_1_run.c: Likewise.
* gcc.target/aarch64/sve/cond_arith_3.c: Likewise.
* gcc.target/aarch64/sve/cond_arith_3_run.c: Likewise.
* gcc.target/aarch64/sve/mask_gather_load_7.c: Likewise.
* gcc.target/aarch64/sve/mask_load_slp_1.c: Likewise.
* gcc.target/aarch64/sve/vcond_11.c: Likewise.
* gcc.target/aarch64/sve/vcond_11_run.c: Likewise.

vect: Allow vconds between different vector sizes

The vcond code requires the compared vectors and the selected
vectors to have both the same size and the same number of elements
as each other.  But the operation makes logical sense even for
different vector sizes.  E.g. you could compare two V4SIs and
use the result to select between two V4DIs.

The underlying optab already allows the compared mode and the selected
mode to be specified separately.  Since the vectoriser now also
supports mixed vector sizes, I think we can simply remove the
equal-size check and just keep the equal-lanes check.  It's then
up to the target to decide which (if any) mixtures of sizes it
supports.

gcc/
* optabs-tree.c (expand_vec_cond_expr_p): Allow the compared values
and the selected values to have different mode sizes.
* gimple-isel.cc (gimple_expand_vec_cond_expr): Likewise.

libstdc++: Assigning to a joinable std::jthread calls std::terminate

Move assigning to a std::jthread that represents a thread of execution
needs to send a stop request and join that running thread. Otherwise the
std::thread data member will terminate in its assignment operator.

Co-authored-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:

* include/std/thread (jthread::operator=(jthread&&)): Transfer
any existing state to a temporary that will request a stop and
then join.
* testsuite/30_threads/jthread/jthread.cc: Test move assignment.

libstdc++: Use helper type for checking thread ID

This encapsulates the storing and checking of the thread ID into a class
type, so that the macro _GLIBCXX_HAS_GTHREADS is only checked in one
place. The code doing the checks just calls member functions of the new
type, without caring whether that really does any work or not.

libstdc++-v3/ChangeLog:

* include/std/stop_token (_Stop_state_t::_M_requester): Define
new struct with members to store and check the thread ID.
(_Stop_state_t::_M_request_stop()): Use _M_requester._M_set().
(_Stop_state_t::_M_remove_callback(_Stop_cb*)): Use
_M_requester._M_is_current_thread().

Support Intel AVX VNNI

2020-10-13  Hongtao Liu  <hongtao.liu@intel.com>
    Hongyu Wang  <hongyu.wang@intel.com>

gcc/
* common/config/i386/cpuinfo.h (get_available_features):
Detect AVXVNNI.
* common/config/i386/i386-common.c
(OPTION_MASK_ISA2_AVXVNNI_SET,
OPTION_MASK_ISA2_AVXVNNI_UNSET): New.
(OPTION_MASK_ISA2_AVX2_UNSET): Add AVXVNNI.
(ix86_hanlde_option): Handle -mavxvnni, unset avxvnni when
avx2 is disabled.
* common/config/i386/i386-cpuinfo.h (enum processor_features):
Add FEATURE_AVXVNNI.
* common/config/i386/i386-isas.h: Add ISA_NAMES_TABLE_ENTRY
for avxvnni.
* config.gcc: Add avxvnniintrin.h.
* config/i386/avx512vnnivlintrin.h: Reimplement 128/256 bit non-mask
intrinsics with macros to support unified interface.
* config/i386/avxvnniintrin.h: New header file.
* config/i386/cpuid.h (bit_AVXVNNI): New.
* config/i386/i386-builtins.c (def_builtin): Handle AVXVNNI mask
for unified builtin.
* config/i386/i386-builtin.def (BDESC): Adjust AVX512VNNI
builtins for AVXVNNI.
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__AVXVNNI__.
* config/i386/i386-expand.c (ix86_expand_builtin): Handle bisa
for AVXVNNI to support unified intrinsic name, since there is no
dependency between AVX512VNNI and AVXVNNI.
* config/i386/i386-options.c (isa2_opts): Add -mavxvnni.
(ix86_valid_target_attribute_inner_p): Handle avxnnni.
(ix86_option_override_internal): Ditto.
* config/i386/i386.h (TARGET_AVXVNNI, TARGET_AVXVNNI_P,
TARGET_AVXVNNI_P, PTA_AVXVNNI): New.
(PTA_SAPPHIRERAPIDS): Add AVX_VNNI.
(PTA_ALDERLAKE): Likewise.
* config/i386/i386.md ("isa"): Add avxvnni, avx512vnnivl.
("enabled"): Adjust for avxvnni and avx512vnnivl.
* config/i386/i386.opt: Add option -mavxvnni.
* config/i386/immintrin.h: Include avxvnniintrin.h.
* config/i386/sse.md (vpdpbusd_<mode>): Adjust for AVXVNNI.
(vpdpbusds_<mode>): Likewise.
(vpdpwssd_<mode>): Likewise.
(vpdpwssds_<mode>): Likewise.
(vpdpbusd_v16si): New.
(vpdpbusds_v16si): Likewise.
(vpdpwssd_v16si): Likewise.
(vpdpwssds_v16si): Likewise.
* doc/invoke.texi: Document -mavxvnni.
* doc/extend.texi: Document avxvnni.
* doc/sourcebuild.texi: Document target avxvnni.

gcc/testsuite/

* gcc.target/i386/avx512vl-vnni-1.c: Rename..
* gcc.target/i386/avx512vl-vnni-1a.c: To This.
* gcc.target/i386/avx512vl-vnni-1b.c: New test.
* gcc.target/i386/avx512vl-vnni-2.c: Ditto.
* gcc.target/i386/avx512vl-vnni-3.c: Ditto.
* gcc.target/i386/avx-vnni-1.c: Ditto.
* gcc.target/i386/avx-vnni-2.c: Ditto.
* gcc.target/i386/avx-vnni-3.c: Ditto.
* gcc.target/i386/avx-vnni-4.c: Ditto.
* gcc.target/i386/avx-vnni-5.c: Ditto.
* gcc.target/i386/avx-vnni-6.c: Ditto.
* gcc.target/i386/avx-vpdpbusd-2.c: Ditto.
* gcc.target/i386/avx-vpdpbusds-2.c: Ditto.
* gcc.target/i386/avx-vpdpwssd-2.c: Ditto.
* gcc.target/i386/avx-vpdpwssds-2.c: Ditto.
* gcc.target/i386/vnni_inline_error.c: Ditto.
* gcc.target/i386/avx512vnnivl-builtin.c: Ditto.
* gcc.target/i386/avxvnni-builtin.c: Ditto.
* gcc.target/i386/funcspec-56.inc: Add new target attribute.
* gcc.target/i386/sse-12.c: Add -mavxvnni.
* gcc.target/i386/sse-13.c: Ditto.
* gcc.target/i386/sse-14.c: Ditto.
* gcc.target/i386/sse-22.c: Ditto.
* gcc.target/i386/sse-23.c: Ditto.
* g++.dg/other/i386-2.C: Ditto.
* g++.dg/other/i386-3.C: Ditto.
* lib/target-supports.exp (check_effective_target_avxvnni):
New proc.

Fix spelling.

gcc/ChangeLog:

* tree.c (copy_node): Fix spelling.

Drop topological sort for PRE phi-translation

The topological sort sorted_array_from_bitmap_set is supposed to
provide isn't one since quite some time since value_ids are
assigned first to SSA names in the order of SSA_NAME_VERSION
and then to hashtable entries in the order they appear in the
table.  One can even argue that expression-ids provide a closer
approximation of a topological sort since those are assigned
during AVAIL_OUT computation which is done in a dominator walk.

Now - phi-translation is not even depending on topological sorting
but it essentially does a DFS walk, phi-translating expressions
it depends on and relying on phi-translation caching to avoid
doing redundant work.

So this patch drops the use of sorted_array_from_bitmap_set from
phi_translate_set because this function is quite expensive.

2020-11-11  Richard Biener  <rguenther@suse.de>

* tree-ssa-pre.c (phi_translate_set): Do not sort the
expression set topologically.

Early exit on VR_VARYING from irange::set.

gcc/ChangeLog:

* value-range.cc (irange::set): Early exit on VR_VARYING.

AArch64: Add FLAG for arithmetic operation intrinsics [PR94442]

2020-11-11  Zhiheng Xie  <xiezhiheng@huawei.com>
    Nannan Zheng  <zhengnannan@huawei.com>

gcc/ChangeLog:

* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for arithmetic operation intrinsics.

gfortran.dg/gomp/workshare-reduction-*.f90: Fix dumps for -m32

gcc/testsuite/ChangeLog:

* gfortran.dg/gomp/workshare-reduction-26.f90: Add (?:_ull) to
scan-tree-dump-times regex for -m32.
* gfortran.dg/gomp/workshare-reduction-27.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-28.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-3.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-36.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-37.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-38.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-39.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-40.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-41.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-42.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-43.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-44.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-45.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-46.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-47.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-56.f90: Likewise.
* gfortran.dg/gomp/workshare-reduction-57.f90: Likewise.

fortran: Fix up gfc_typename CHARACTER length handling [PR97768]

The first testcase below ICEs when f951 is 32-bit (or 64-bit big-endian).
The problem is that ex->ts.u.cl && ex->ts.u.cl->length are both non-NULL,
but ex->ts.u.cl->length->expr_type is not EXPR_CONSTANT, but EXPR_FUNCTION.
value.function.actual and value.function.name are in that case pointers,
but value._mp_alloc and value._mp_size are 4 byte integers no matter what.
So, in 64-bit little-endian the function returns most of the time incorrect
CHARACTER(0) because the most significant 32 bits of the
value.function.actual pointer are likely 0.
Anyway, the following patch is an attempt to get all the cases right.
Uses ex->value.character.length only for ex->expr_type == EXPR_CONSTANT
(i.e. CHARACTER literals), handles the deferred lengths, assumed lengths,
known constant lengths and finally if the length is something other,
just doesn't print it, i.e. prints just CHARACTER (for default kind)
or CHARACTER(KIND=4) (for e.g. kind 4).

2020-11-11  Jakub Jelinek  <jakub@redhat.com>

PR fortran/97768
gcc/fortran/
* misc.c (gfc_typename): Use ex->value.character.length only if
ex->expr_type == EXPR_CONSTANT.  If ex->ts.deferred, print : instead
of length.  If ex->ts.u.cl && ex->ts.u.cl->length == NULL, print *
instead of length.  Otherwise if character length is non-constant,
print just CHARACTER or CHARACTER(KIND=N).
gcc/testsuite/
* gfortran.dg/pr97768_1.f90: New test.
* gfortran.dg/pr97768_2.f90: New test.

Re: Refactor copying decl section names

* go-gcc.cc (Gcc_backend::global_variable_set_init): Cast NULL to
avoid ambiguous overloaded call.

Improve efficiency of copying section from another tree

gcc/
* cgraph.h (symtab_node::set_section_for_node): Declare new
overload.
(symtab_node::set_section_from_string): Rename from set_section.
(symtab_node::set_section_from_node): Declare.
* symtab.c (symtab_node::set_section_for_node): Define new
overload.
(symtab_node::set_section_from_string): Rename from set_section.
(symtab_node::set_section_from_node): Define.
(symtab_node::set_section): Call renamed set_section_from_string.
(symtab_node::set_section): Call new set_section_from_node.

Refactor section name ref counting

gcc/

* symtab.c (symtab_node::set_section_for_node): Extract reference
counting logic into ...
(retain_section_hash_entry): ... here (new function) and ...
(release_section_hash_entry): ... here (new function).

Formatting, there should be a space between PTA_* and (.

gcc/ChangeLog
* config/i386/i386.h (PTA_MOVDIRI, PTA_MOVDIR64B,
PTA_AMX_TILE, PTA_AMX_INT8, PTA_AMX_BF16, PTA_HRESET):
Formatting.

Update MicroBlaze strings test

gcc/testsuite

* gcc.target/microblaze/others/strings1.c: Update
to include $LC label.

testsuite: skip zero-scratch-regs on powerpc.

These tests are unsupported on PowerPC.

gcc/testsuite/ChangeLog:

* c-c++-common/zero-scratch-regs-10.c: Skip on powerpc*-*-*.
* c-c++-common/zero-scratch-regs-11.c: Skip on powerpc*-*-*.
* c-c++-common/zero-scratch-regs-5.c: Skip on powerpc*-*-aix*.
* c-c++-common/zero-scratch-regs-8.c: Skip on powerpc*-*-*.
* c-c++-common/zero-scratch-regs-9.c: Skip on powerpc*-*-*.

libstdc++: Implement std::emit_on_flush etc.

This adds the manipulators for use with basic_osyncstream. In order to
detect when an arbitrary basic_ostream<C,T> is the base class of a
basic_syncbuf<C,T,A> object, introduce a new intermediate base class
that stores the data members. The new base class stores a pointer and
two bools, which wastes (sizeof(void*) - 2) bytes of padding. It would
be possible to use the two least significant bits of the pointer for the
two bools, at least for targets where alignof(basic_streambuf) > 2, but
that's left as a possible change for a future date.

Also define basic_syncbuf::overflow to override the virtual function in
the base class, so that single characters can be inserted into the
stream buffer. Previously the default basic_streambuf::overflow
implementation was used, which drops the character on the floor.

libstdc++-v3/ChangeLog:

* include/std/ostream (__syncbuf_base): New class template.
(emit_on_flush, noemit_on_flush, flush_emit): New manipulators.
* include/std/syncstream (basic_syncbuf): Derive from
__syncbuf_base instead of basic_streambuf.
(basic_syncbuf::operator=): Remove self-assignment check.
(basic_syncbuf::swap): Remove self-swap check.
(basic_syncbuf::emit): Do not skip pubsync() call if sequence
is empty.
(basic_syncbuf::sync): Remove no-op pubsync on stringbuf.
(basic_syncbuf::overflow): Define override.
* testsuite/27_io/basic_syncstream/basic_ops/1.cc: Test
basic_osyncstream::put(char_type).
* testsuite/27_io/basic_ostream/emit/1.cc: New test.

Daily bump.

IBM Z: Fix bootstrap breakage due to HAVE_TF macro

Commit e627cda56865 ("IBM Z: Store long doubles in vector registers
when possible") introduced HAVE_TF macro which expands to a logical
"or" of HAVE_ constants.  Not all of these constants are available in
GENERATOR_FILE context, so a hack was used: simply expand to true in
this case, because the actual value matters only during compiler
runtime and not during generation.

However, one aspect of this value matters during generation after all:
whether or not it's a constant, which in this case it appears to be.
This results in incorrect values in insn-flags.h and broken bootstrap
for some configurations.

Fix by using a dummy value that is not a constant.

gcc/ChangeLog:

2020-11-10  Ilya Leoshkevich  <iii@linux.ibm.com>

* config/s390/s390.h (HAVE_TF): Use opaque value when
GENERATOR_FILE is defined.

libstdc++: Avoid bad_alloc exceptions when changing locales

For the --enable-clocale=generic configuration, the current code can
fail with a bad_alloc exception. This patch uses the nothrow version of
operator new and reports allocation failures by setting failbit in the
iostate variable.

* config/locale/generic/c_locale.cc (__set_C_locale()): New function
to set the "C" locale and return the name of the previous locale.
(__convert_to_v<float>, __convert_to_v<double>)
(__convert_to_v<long double>): Use __set_C_locale and set failbit on
error.

c++: Improve static_assert diagnostic [PR97518]

Currently, when a static_assert fails, we only say "static assertion failed".
It would be more useful if we could also print the expression that
evaluated to false; this is especially useful when the condition uses
template parameters.  Consider the motivating example, in which we have
this line:

  static_assert(is_same<X, Y>::value);

if this fails, the user has to play dirty games to get the compiler to
print the template arguments.  With this patch, we say:

  error: static assertion failed
  note: 'is_same<int*, int>::value' evaluates to false

which I think is much better.  However, always printing the condition that
evaluated to 'false' wouldn't be very useful: e.g. noexcept(fn) is
always parsed to true/false, so we would say "'false' evaluates to false"
which doesn't help.  So I wound up only printing the condition when it was
instantiation-dependent, that is, we called finish_static_assert from
tsubst_expr.

Moreover, this patch also improves the diagnostic when the condition
consists of a logical AND.  Say you have something like this:

  static_assert(fn1() && fn2() && fn3() && fn4() && fn5());

where fn4() evaluates to false and the other ones to true.  Highlighting
the whole thing is not that helpful because it won't say which clause
evaluated to false.  With the find_failing_clause tweak in this patch
we emit:

  error: static assertion failed
    6 | static_assert(fn1() && fn2() && fn3() && fn4() && fn5());
      |                                          ~~~^~

so you know right away what's going on.  Unfortunately, when you combine
both things, that is, have an instantiation-dependent expr and && in
a static_assert, we can't yet quite point to the clause that failed.  It
is because when we tsubstitute something like is_same<X, Y>::value, we
generate a VAR_DECL that doesn't have any location.  It would be awesome
if we could wrap it with a location wrapper, but I didn't see anything
obvious.

In passing, I've cleaned up some things:
* use iloc_sentinel when appropriate,
* it's nicer to call contextual_conv_bool instead of the rather verbose
  perform_implicit_conversion_flags,
* no need to check for INTEGER_CST before calling integer_zerop.

gcc/cp/ChangeLog:

PR c++/97518
* cp-tree.h (finish_static_assert): Adjust declaration.
* parser.c (cp_parser_static_assert): Pass false to
finish_static_assert.
* pt.c (tsubst_expr): Pass true to finish_static_assert.
* semantics.c (find_failing_clause_r): New function.
(find_failing_clause): New function.
(finish_static_assert): Add a bool parameter.  Use
iloc_sentinel.  Call contextual_conv_bool instead of
perform_implicit_conversion_flags.  Don't check for INTEGER_CST before
calling integer_zerop.  Call find_failing_clause and maybe use its
location.  Print the original condition or the failing clause if
SHOW_EXPR_P.

gcc/testsuite/ChangeLog:

PR c++/97518
* g++.dg/diagnostic/pr87386.C: Adjust expected output.
* g++.dg/diagnostic/static_assert1.C: New test.
* g++.dg/diagnostic/static_assert2.C: New test.

libcc1/ChangeLog:

PR c++/97518
* libcp1plugin.cc (plugin_add_static_assert): Pass false to
finish_static_assert.

c++: Add 5 unfixed tests.

A couple of dg-ice tests.

gcc/testsuite/ChangeLog:

PR c++/52830
PR c++/88982
PR c++/90799
PR c++/87765
PR c++/89565
* g++.dg/cpp0x/constexpr-52830.C: New test.
* g++.dg/cpp0x/vt-88982.C: New test.
* g++.dg/cpp1z/class-deduction76.C: New test.
* g++.dg/cpp1z/constexpr-lambda26.C: New test.
* g++.dg/cpp2a/nontype-class39.C: New test.

libstdc++: Reorder constructors in <sstream>

This groups all the constructors together, consistent with the synopses
in the C++20 standard.

libstdc++-v3/ChangeLog:

* include/std/sstream (basic_stringbug, basic_istringstream)
(basic_ostringstream, basic_stringstream): Reorder C++20
constructors to be declared next to other constructors.

libstdc++: Add remaining C++20 additions to <sstream> [P0408R7]

This adds the new overloads of basic_stringbuf::str, and the
corresponding overloads to basic_istringstream, basic_ostringstream and
basic_stringstream.

libstdc++-v3/ChangeLog:

* config/abi/pre/gnu.ver (GLIBCXX_3.4.21): Tighten patterns.
(GLIBCXX_3.4.29): Export new symbols.
* include/bits/alloc_traits.h (__allocator_like): New concept.
* include/std/sstream (basic_stringbuf::swap): Add exception
specification.
(basic_stringbuf::str() const): Add ref-qualifier. Use new
_M_high_mark function.
(basic_stringbuf::str(const SAlloc&) const): Define new function.
(basic_stringbuf::str() &&): Likewise.
(basic_stringbuf::str(const basic_string<C,T,SAlloc>&)):
Likewise.
(basic_stringbuf::str(basic_string<C,T,Alloc>&&)): Likewise.
(basic_stringbuf::view() const): Use _M_high_mark.
(basic_istringstream::str, basic_ostringstream::str)
(basic_stringstream::str): Define new overloads.
* src/c++20/sstream-inst.cc (basic_stringbuf::str)
(basic_istringstream::str, basic_ostringstream::str)
(basic_stringstream::str): Explicit instantiation definitions
for new overloads.
* testsuite/27_io/basic_istringstream/view/char/1.cc: Add more
checks.
* testsuite/27_io/basic_istringstream/view/wchar_t/1.cc:
Likewise.
* testsuite/27_io/basic_ostringstream/view/char/1.cc:
Likewise.
* testsuite/27_io/basic_ostringstream/view/wchar_t/1.cc:
Likewise.
* testsuite/27_io/basic_stringstream/view/char/1.cc:
Likewise.
* testsuite/27_io/basic_stringstream/view/wchar_t/1.cc:
Likewise.
* testsuite/27_io/basic_istringstream/str/char/2.cc: New test.
* testsuite/27_io/basic_istringstream/str/wchar_t/2.cc: New test.
* testsuite/27_io/basic_ostringstream/str/char/3.cc: New test.
* testsuite/27_io/basic_ostringstream/str/wchar_t/3.cc: New test.
* testsuite/27_io/basic_stringbuf/str/char/4.cc: New test.
* testsuite/27_io/basic_stringbuf/str/wchar_t/4.cc: New test.
* testsuite/27_io/basic_stringstream/str/char/5.cc: New test.
* testsuite/27_io/basic_stringstream/str/wchar_t/5.cc.cc: New test.

libstdc++: Fix more unspecified comparisons to null pointer [PR 97415]

This adds some more null checks to avoid a relational comparison with a
null pointer, similar to 78198b6021a9695054dab039340202170b88423c.

libstdc++-v3/ChangeLog:

PR libstdc++/97415
* include/std/sstream (basic_stringbuf::_M_update_egptr)
(basic_stringbuf::__xfer_bufptrs::__xfer_bufptrs): Check for
null before comparing pointers.

Refactor copying decl section names

gcc/

* cgraph.h (symtab_node::get_section): Constify.
(symtab_node::set_section): Declare new overload.
* symtab.c (symtab_node::set_section): Define new overload.
(symtab_node::copy_visibility_from): Use new overload of
symtab_node::set_section.
(symtab_node::resolve_alias): Same.
* tree.h (set_decl_section_name): Declare new overload.
* tree.c (set_decl_section_name): Define new overload.
* tree-emutls.c (get_emutls_init_templ_addr): Same.
* cgraphclones.c (cgraph_node::create_virtual_clone): Use new
overload of symtab_node::set_section.
(cgraph_node::create_version_clone_with_body): Same.
* trans-mem.c (ipa_tm_create_version): Same.

gcc/c
* c-decl.c (merge_decls): Use new overload of
set_decl_section_name.

gcc/cp
* decl.c (duplicate_decls): Use new overload of
set_decl_section_name.
* method.c (use_thunk): Same.
* optimize.c (maybe_clone_body): Same.
* coroutines.cc (act_des_fn): Same.

gcc/d
* decl.cc (finish_thunk): Use new overload of
set_decl_section_name

Early exit from irange::set for poly ints.

My previous cleanups to irange::set moved the early exit when
VARYING.  This caused poly int varyings to be created with
incorrect min/max.

We can just set varying and exit for all poly ints.

gcc/ChangeLog:

* value-range.cc (irange::set): Early exit for poly ints.

analyzer: remove dead code

gcc/analyzer/ChangeLog:

* constraint-manager.cc (constraint_manager::merge): Remove
unused code.
* constraint-manager.h: Likewise.
* program-state.cc (sm_state_map::sm_state_map): Likewise.
(program_state::program_state): Likewise.
(test_sm_state_map): Likewise.
* program-state.h: Likewise.
* region-model-reachability.cc (reachable_regions::reachable_regions): Likewise.
* region-model-reachability.h: Likewise.
* region-model.cc (region_model::handle_unrecognized_call): Likewise.
(region_model::get_reachable_svalues): Likewise.
(region_model::can_merge_with_p): Likewise.

Fortran: OpenMP 5.0 (in_,task_)reduction clause extensions

gcc/fortran/ChangeLog:

* dump-parse-tree.c (show_omp_clauses): Handle new reduction enums.
* gfortran.h (OMP_LIST_REDUCTION_INSCAN, OMP_LIST_REDUCTION_TASK,
OMP_LIST_IN_REDUCTION, OMP_LIST_TASK_REDUCTION): Add enums.
* openmp.c (enum omp_mask1): Add OMP_CLAUSE_IN_REDUCTION
and OMP_CLAUSE_TASK_REDUCTION.
(gfc_match_omp_clause_reduction): Extend reduction handling;
moved from ...
(gfc_match_omp_clauses): ... here. Add calls to it.
(OMP_TASK_CLAUSES, OMP_TARGET_CLAUSES, OMP_TASKLOOP_CLAUSES):
Add OMP_CLAUSE_IN_REDUCTION.
(gfc_match_omp_taskgroup): Add task_reduction matching.
(resolve_omp_clauses): Update for new reduction clause changes;
remove removed nonmonotonic-schedule restrictions.
(gfc_resolve_omp_parallel_blocks): Add new enums to switch.
* trans-openmp.c (gfc_omp_clause_default_ctor,
gfc_trans_omp_reduction_list, gfc_trans_omp_clauses,
gfc_split_omp_clauses): Handle updated reduction clause.

gcc/ChangeLog:

* gimplify.c (gimplify_scan_omp_clauses, gimplify_omp_loop): Use 'do'
instead of 'for' in error messages for Fortran.
* omp-low.c (check_omp_nesting_restrictions): Likewise

gcc/testsuite/ChangeLog:

* gfortran.dg/gomp/schedule-modifiers-2.f90: Remove some dg-error.
* gfortran.dg/gomp/reduction4.f90: New test.
* gfortran.dg/gomp/reduction5.f90: New test.
* gfortran.dg/gomp/workshare-reduction-1.f90: New test.
* gfortran.dg/gomp/workshare-reduction-2.f90: New test.
* gfortran.dg/gomp/workshare-reduction-3.f90: New test.
* gfortran.dg/gomp/workshare-reduction-4.f90: New test.
* gfortran.dg/gomp/workshare-reduction-5.f90: New test.
* gfortran.dg/gomp/workshare-reduction-6.f90: New test.
* gfortran.dg/gomp/workshare-reduction-7.f90: New test.
* gfortran.dg/gomp/workshare-reduction-8.f90: New test.
* gfortran.dg/gomp/workshare-reduction-9.f90: New test.
* gfortran.dg/gomp/workshare-reduction-10.f90: New test.
* gfortran.dg/gomp/workshare-reduction-11.f90: New test.
* gfortran.dg/gomp/workshare-reduction-12.f90: New test.
* gfortran.dg/gomp/workshare-reduction-13.f90: New test.
* gfortran.dg/gomp/workshare-reduction-14.f90: New test.
* gfortran.dg/gomp/workshare-reduction-15.f90: New test.
* gfortran.dg/gomp/workshare-reduction-16.f90: New test.
* gfortran.dg/gomp/workshare-reduction-17.f90: New test.
* gfortran.dg/gomp/workshare-reduction-18.f90: New test.
* gfortran.dg/gomp/workshare-reduction-19.f90: New test.
* gfortran.dg/gomp/workshare-reduction-20.f90: New test.
* gfortran.dg/gomp/workshare-reduction-21.f90: New test.
* gfortran.dg/gomp/workshare-reduction-22.f90: New test.
* gfortran.dg/gomp/workshare-reduction-23.f90: New test.
* gfortran.dg/gomp/workshare-reduction-24.f90: New test.
* gfortran.dg/gomp/workshare-reduction-25.f90: New test.
* gfortran.dg/gomp/workshare-reduction-26.f90: New test.
* gfortran.dg/gomp/workshare-reduction-27.f90: New test.
* gfortran.dg/gomp/workshare-reduction-28.f90: New test.
* gfortran.dg/gomp/workshare-reduction-29.f90: New test.
* gfortran.dg/gomp/workshare-reduction-30.f90: New test.
* gfortran.dg/gomp/workshare-reduction-31.f90: New test.
* gfortran.dg/gomp/workshare-reduction-32.f90: New test.
* gfortran.dg/gomp/workshare-reduction-33.f90: New test.
* gfortran.dg/gomp/workshare-reduction-34.f90: New test.
* gfortran.dg/gomp/workshare-reduction-35.f90: New test.
* gfortran.dg/gomp/workshare-reduction-36.f90: New test.
* gfortran.dg/gomp/workshare-reduction-37.f90: New test.
* gfortran.dg/gomp/workshare-reduction-38.f90: New test.
* gfortran.dg/gomp/workshare-reduction-39.f90: New test.
* gfortran.dg/gomp/workshare-reduction-40.f90: New test.
* gfortran.dg/gomp/workshare-reduction-41.f90: New test.
* gfortran.dg/gomp/workshare-reduction-42.f90: New test.
* gfortran.dg/gomp/workshare-reduction-43.f90: New test.
* gfortran.dg/gomp/workshare-reduction-44.f90: New test.
* gfortran.dg/gomp/workshare-reduction-45.f90: New test.
* gfortran.dg/gomp/workshare-reduction-46.f90: New test.
* gfortran.dg/gomp/workshare-reduction-47.f90: New test.
* gfortran.dg/gomp/workshare-reduction-48.f90: New test.
* gfortran.dg/gomp/workshare-reduction-49.f90: New test.
* gfortran.dg/gomp/workshare-reduction-50.f90: New test.
* gfortran.dg/gomp/workshare-reduction-51.f90: New test.
* gfortran.dg/gomp/workshare-reduction-52.f90: New test.
* gfortran.dg/gomp/workshare-reduction-53.f90: New test.
* gfortran.dg/gomp/workshare-reduction-54.f90: New test.
* gfortran.dg/gomp/workshare-reduction-55.f90: New test.
* gfortran.dg/gomp/workshare-reduction-56.f90: New test.
* gfortran.dg/gomp/workshare-reduction-57.f90: New test.
* gfortran.dg/gomp/workshare-reduction-58.f90: New test.

opts: Change `is incompatible with` messages to have standard parametrised form

Hello,

In a recent review for one of the hwasan patches Richard S. noticed there are
quite a few errors of the form "%<someflag%> is incompatible with
<otherflag%>".
https://gcc.gnu.org/pipermail/gcc-patches/2020-October/556137.html

In order to avoid this creating extra work for translators we would like to
change these error messages to use the form "%qs is incompatible with %qs" and
pass the flag as format arguments.

This patch implements that change.
There is only one change in the output the compiler produces from this patch,
an error message of "-fsanitize=address and -fsanitize=kernel-address are
incompatible with -fsanitize=thread" has been changed to "-fsanitize=thread is
incompatible with -fsanitize=address|kernel-address".
This matches the similar error messages for live patching which use the
messages "-f<something> is incompatible with
-flive-patching=inline-only-static|inline-clone".

Ok for trunk?

gcc/ChangeLog:

* opts.c (control_options_for_live_patching): Reform 'is incompatible
with' error messages to use a standard message with differing format
arguments.
(finish_options): Likewise.

gcc/testsuite/ChangeLog:

* c-c++-common/ubsan/sanitize-recover-7.c: Update testcase.

Fix minor whitespace issues

libgcc/

* libgcc2.c: Fix whitespace issues in most recent change.

Improve generated code for various libgcc2.c routines

libgcc/

* libgcc2.c (__addvSI3): Use overflow builtins.
(__addvsi3, __addvDI3 ,__subvSI3, __subvsi3): Likewise.
(__subvDI3 __mulvSI3, __mulvsi3, __negvSI2): Likewise.
(__negvsi2, __negvDI2): Likewise.
(__cmpdi2, __ucmpdi2): Adjust implementation to improve
generated code.
* libgcc2.h (__ucmpdi2): Adjust prototype.

libgo: update to Go 1.15.4 release

Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/268177

c, c++: Fix up -Wunused-value on COMPLEX_EXPRs [PR97748]

The -Wunused-value warning in both C and C++ FEs (implemented
significantly differently between the two) sees the COMPLEX_EXPRs created
e.g. for complex pre/post increment and many other expressions as useless
and warns about it.

For the C warning implementation, on e.g.
COMPLEX_EXPR < ++REALPART_EXPR <x>, IMAGPART_EXPR <x>>;
would warn even on the IMAGPART_EXPR <x> there alone etc., so what works
is check if we'd warn about both operands of COMPLEX_EXPR and if yes,
warn on the whole COMPLEX_EXPR, otherwise don't warn.

The C++ warning implementation is significantly different and for that one
the only warn if both would be warned about doesn't really work,
we then miss warnings e.g. about
COMPLEX_EXPR <REALPART_EXPR <SAVE_EXPR <x>> + 1.0e+0, IMAGPART_EXPR <SAVE_EXPR <x>>> >>>>>
The patch replaces the warning_at call with call to the c-family
warn_if_unused_value function.

On the testcase which after the initial new tests contains pretty much
everything from gcc.dg/Wunused-value-1.c both approaches seem to work
nicely.

2020-11-10  Jakub Jelinek  <jakub@redhat.com>

PR c/97748
gcc/c-family/
* c-common.h (warn_if_unused_value): Add quiet argument defaulted
to false.
* c-warn.c (warn_if_unused_value): Likewise.  Pass it down
recursively and just return true instead of warning if it is true.
Handle COMPLEX_EXPR.
gcc/cp/
* cvt.c (convert_to_void): Check (complain & tf_warning) in the outer
if rather than twice times in the inner one.  Use warn_if_unused_value.
Formatting fix.
gcc/testsuite/
* c-c++-common/Wunused-value-1.c: New test.

tree-optimization/97769 - fix assert in peeling for alignment

The following removes an assert that can not easily be adjusted to
cover the additional cases we now handle after the removal of
the same-align DRs vector.

2020-11-10  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97769
* tree-vect-data-refs.c (vect_update_misalignment_for_peel):
Remove assert.

* gcc.dg/vect/pr97769.c: New testcase.

tree-optimization/97780 - fix ICE in fini_pre

This deals with blocks elimination added.

2020-11-10  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97780
* tree-ssa-pre.c (fini_pre): Deal with added basic blocks
when freeing PHI_TRANS_TABLE.

AArch64: Add FLAG for tbl/tbx intrinsics [PR94442]

2020-11-10  Zhiheng Xie  <xiezhiheng@huawei.com>
    Nannan Zheng  <zhengnannan@huawei.com>

gcc/ChangeLog:

* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for tbl/tbx intrinsics.

openmp: Implement OpenMP 5.0 base-pointer attachement and clause ordering

This patch implements some parts of the target variable mapping changes
specified in OpenMP 5.0, including base-pointer attachment/detachment
behavior for array section list-items in map clauses, and ordering of
map clauses according to map kind.

2020-11-10  Chung-Lin Tang  <cltang@codesourcery.com>

gcc/c-family/ChangeLog:

* c-common.h (c_omp_adjust_map_clauses): New declaration.
* c-omp.c (struct map_clause): Helper type for c_omp_adjust_map_clauses.
(c_omp_adjust_map_clauses): New function.

gcc/c/ChangeLog:

* c-parser.c (c_parser_omp_target_data): Add use of
new c_omp_adjust_map_clauses function. Add GOMP_MAP_ATTACH_DETACH as
handled map clause kind.
(c_parser_omp_target_enter_data): Likewise.
(c_parser_omp_target_exit_data): Likewise.
(c_parser_omp_target): Likewise.
* c-typeck.c (handle_omp_array_sections): Adjust COMPONENT_REF case to
use GOMP_MAP_ATTACH_DETACH map kind for C_ORT_OMP region type.
(c_finish_omp_clauses): Adjust bitmap checks to allow struct decl and
same struct field access to co-exist on OpenMP construct.

gcc/cp/ChangeLog:

* parser.c (cp_parser_omp_target_data): Add use of
new c_omp_adjust_map_clauses function. Add GOMP_MAP_ATTACH_DETACH as
handled map clause kind.
(cp_parser_omp_target_enter_data): Likewise.
(cp_parser_omp_target_exit_data): Likewise.
(cp_parser_omp_target): Likewise.
* semantics.c (handle_omp_array_sections): Adjust COMPONENT_REF case to
use GOMP_MAP_ATTACH_DETACH map kind for C_ORT_OMP region type. Fix
interaction between reference case and attach/detach.
(finish_omp_clauses): Adjust bitmap checks to allow struct decl and
same struct field access to co-exist on OpenMP construct.

gcc/ChangeLog:

* gimplify.c (is_or_contains_p): New static helper function.
(omp_target_reorder_clauses): New function.
(gimplify_scan_omp_clauses): Add use of omp_target_reorder_clauses to
reorder clause list according to OpenMP 5.0 rules. Add handling of
GOMP_MAP_ATTACH_DETACH for OpenMP cases.
* omp-low.c (is_omp_target): New static helper function.
(scan_sharing_clauses): Add scan phase handling of GOMP_MAP_ATTACH/DETACH
for OpenMP cases.
(lower_omp_target): Add lowering handling of GOMP_MAP_ATTACH/DETACH for
OpenMP cases.

gcc/testsuite/ChangeLog:

* c-c++-common/gomp/clauses-2.c: Remove dg-error cases now valid.
* gfortran.dg/gomp/map-2.f90: Likewise.
* c-c++-common/gomp/map-5.c: New testcase.

libgomp/ChangeLog:

* libgomp.h (enum gomp_map_vars_kind): Adjust enum values to be bit-flag
usable.
* oacc-mem.c (acc_map_data): Adjust gomp_map_vars argument flags to
'GOMP_MAP_VARS_OPENACC | GOMP_MAP_VARS_ENTER_DATA'.
(goacc_enter_datum): Likewise for call to gomp_map_vars_async.
(goacc_enter_data_internal): Likewise.
* target.c (gomp_map_vars_internal):
Change checks of GOMP_MAP_VARS_ENTER_DATA to use bit-and (&). Adjust use
of gomp_attach_pointer for OpenMP cases.
(gomp_exit_data): Add handling of GOMP_MAP_DETACH.
(GOMP_target_enter_exit_data): Add handling of GOMP_MAP_ATTACH.
* testsuite/libgomp.c-c++-common/ptr-attach-1.c: New testcase.

IBM Z: Test long doubles in vector registers

gcc/testsuite/ChangeLog:

2020-11-05  Ilya Leoshkevich  <iii@linux.ibm.com>

* gcc.target/s390/vector/long-double-callee-abi-scan.c: New test.
* gcc.target/s390/vector/long-double-caller-abi-run.c: New test.
* gcc.target/s390/vector/long-double-caller-abi-scan.c: New test.
* gcc.target/s390/vector/long-double-copysign.c: New test.
* gcc.target/s390/vector/long-double-fprx2-constant.c: New test.
* gcc.target/s390/vector/long-double-from-double.c: New test.
* gcc.target/s390/vector/long-double-from-float.c: New test.
* gcc.target/s390/vector/long-double-from-i16.c: New test.
* gcc.target/s390/vector/long-double-from-i32.c: New test.
* gcc.target/s390/vector/long-double-from-i64.c: New test.
* gcc.target/s390/vector/long-double-from-i8.c: New test.
* gcc.target/s390/vector/long-double-from-u16.c: New test.
* gcc.target/s390/vector/long-double-from-u32.c: New test.
* gcc.target/s390/vector/long-double-from-u64.c: New test.
* gcc.target/s390/vector/long-double-from-u8.c: New test.
* gcc.target/s390/vector/long-double-to-double.c: New test.
* gcc.target/s390/vector/long-double-to-float.c: New test.
* gcc.target/s390/vector/long-double-to-i16.c: New test.
* gcc.target/s390/vector/long-double-to-i32.c: New test.
* gcc.target/s390/vector/long-double-to-i64.c: New test.
* gcc.target/s390/vector/long-double-to-i8.c: New test.
* gcc.target/s390/vector/long-double-to-u16.c: New test.
* gcc.target/s390/vector/long-double-to-u32.c: New test.
* gcc.target/s390/vector/long-double-to-u64.c: New test.
* gcc.target/s390/vector/long-double-to-u8.c: New test.
* gcc.target/s390/vector/long-double-vec-duplicate.c: New test.
* gcc.target/s390/vector/long-double-wf.h: New test.
* gcc.target/s390/vector/long-double-wfaxb.c: New test.
* gcc.target/s390/vector/long-double-wfcxb-0001.c: New test.
* gcc.target/s390/vector/long-double-wfcxb-0111.c: New test.
* gcc.target/s390/vector/long-double-wfcxb-1011.c: New test.
* gcc.target/s390/vector/long-double-wfcxb-1101.c: New test.
* gcc.target/s390/vector/long-double-wfdxb.c: New test.
* gcc.target/s390/vector/long-double-wfixb.c: New test.
* gcc.target/s390/vector/long-double-wfkxb-0111.c: New test.
* gcc.target/s390/vector/long-double-wfkxb-1011.c: New test.
* gcc.target/s390/vector/long-double-wfkxb-1101.c: New test.
* gcc.target/s390/vector/long-double-wflcxb.c: New test.
* gcc.target/s390/vector/long-double-wflpxb.c: New test.
* gcc.target/s390/vector/long-double-wfmaxb-2.c: New test.
* gcc.target/s390/vector/long-double-wfmaxb-3.c: New test.
* gcc.target/s390/vector/long-double-wfmaxb-disabled.c: New test.
* gcc.target/s390/vector/long-double-wfmaxb.c: New test.
* gcc.target/s390/vector/long-double-wfmsxb-disabled.c: New test.
* gcc.target/s390/vector/long-double-wfmsxb.c: New test.
* gcc.target/s390/vector/long-double-wfmxb.c: New test.
* gcc.target/s390/vector/long-double-wfnmaxb-disabled.c: New test.
* gcc.target/s390/vector/long-double-wfnmaxb.c: New test.
* gcc.target/s390/vector/long-double-wfnmsxb-disabled.c: New test.
* gcc.target/s390/vector/long-double-wfnmsxb.c: New test.
* gcc.target/s390/vector/long-double-wfsqxb.c: New test.
* gcc.target/s390/vector/long-double-wfsxb-1.c: New test.
* gcc.target/s390/vector/long-double-wfsxb.c: New test.
* gcc.target/s390/vector/long-double-wftcixb-1.c: New test.
* gcc.target/s390/vector/long-double-wftcixb.c: New test.

IBM Z: Store long doubles in vector registers when possible

On z14+, there are instructions for working with 128-bit floats (long
doubles) in vector registers.  It's beneficial to use them instead of
instructions that operate on floating point register pairs, because it
allows to store 4 times more data in registers at a time, relieving
register pressure.  The raw performance of the new instructions is
almost the same as that of the new ones.

Implement by storing TFmode values in vector registers on z14+.  Since
not all operations are available with the new instructions, keep the
old ones available using the new FPRX2 mode, and convert between it and
TFmode when necessary (this is called "forwarder" expanders below).
Change the existing TFmode expanders to call either new- or old-style
ones depending on whether we are on z14+ or older machines
("dispatcher" expanders).

gcc/ChangeLog:

2020-11-03  Ilya Leoshkevich  <iii@linux.ibm.com>

* config/s390/s390-modes.def (FPRX2): New mode.
* config/s390/s390-protos.h (s390_fma_allowed_p): New function.
* config/s390/s390.c (s390_fma_allowed_p): Likewise.
(s390_build_signbit_mask): Support 128-bit masks.
(print_operand): Support printing the second word of a TFmode
operand as vector register.
(constant_modes): Add FPRX2mode.
(s390_class_max_nregs): Return 1 for TFmode on z14+.
(s390_is_fpr128): New function.
(s390_is_vr128): Likewise.
(s390_can_change_mode_class): Use s390_is_fpr128 and
s390_is_vr128 in order to determine whether mode refers to a FPR
pair or to a VR.
(s390_emit_compare): Force TFmode operands into registers on
z14+.
* config/s390/s390.h (HAVE_TF): New macro.
(EXPAND_MOVTF): New macro.
(EXPAND_TF): Likewise.
* config/s390/s390.md (PFPO_OP_TYPE_FPRX2): PFPO_OP_TYPE_TF
alias.
(ALL): Add FPRX2.
(FP_ALL): Add FPRX2 for z14+, restrict TFmode to z13-.
(FP): Likewise.
(FP_ANYTF): New mode iterator.
(BFP): Add FPRX2 for z14+, restrict TFmode to z13-.
(TD_TF): Likewise.
(xde): Add FPRX2.
(nBFP): Likewise.
(nDFP): Likewise.
(DSF): Likewise.
(DFDI): Likewise.
(SFSI): Likewise.
(DF): Likewise.
(SF): Likewise.
(fT0): Likewise.
(bt): Likewise.
(_d): Likewise.
(HALF_TMODE): Likewise.
(tf_fpr): New mode_attr.
(type): New mode_attr.
(*cmp<mode>_ccz_0): Use type instead of mode with fsimp.
(*cmp<mode>_ccs_0_fastmath): Likewise.
(*cmptf_ccs): New pattern for wfcxb.
(*cmptf_ccsfps): New pattern for wfkxb.
(mov<mode>): Rename to mov<mode><tf_fpr>.
(signbit<mode>2): Rename to signbit<mode>2<tf_fpr>.
(isinf<mode>2): Renamed to isinf<mode>2<tf_fpr>.
(*TDC_insn_<mode>): Use type instead of mode with fsimp.
(fixuns_trunc<FP:mode><GPR:mode>2): Rename to
fixuns_trunc<FP:mode><GPR:mode>2<FP:tf_fpr>.
(fix_trunctf<mode>2): Rename to fix_trunctf<mode>2_fpr.
(floatdi<mode>2): Rename to floatdi<mode>2<tf_fpr>, use type
instead of mode with itof.
(floatsi<mode>2): Rename to floatsi<mode>2<tf_fpr>, use type
instead of mode with itof.
(*floatuns<GPR:mode><FP:mode>2): Use type instead of mode for
itof.
(floatuns<GPR:mode><FP:mode>2): Rename to
floatuns<GPR:mode><FP:mode>2<tf_fpr>.
(trunctf<mode>2): Rename to trunctf<mode>2_fpr, use type instead
of mode with fsimp.
(extend<DSF:mode><BFP:mode>2): Rename to
extend<DSF:mode><BFP:mode>2<BFP:tf_fpr>.
(<FPINT:fpint_name><BFP:mode>2): Rename to
<FPINT:fpint_name><BFP:mode>2<BFP:tf_fpr>, use type instead of
mode with fsimp.
(rint<BFP:mode>2): Rename to rint<BFP:mode>2<BFP:tf_fpr>, use
type instead of mode with fsimp.
(<FPINT:fpint_name><DFP:mode>2): Use type instead of mode for
fsimp.
(rint<DFP:mode>2): Likewise.
(trunc<BFP:mode><DFP_ALL:mode>2): Rename to
trunc<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
(trunc<DFP_ALL:mode><BFP:mode>2): Rename to
trunc<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
(extend<BFP:mode><DFP_ALL:mode>2): Rename to
extend<BFP:mode><DFP_ALL:mode>2<BFP:tf_fpr>.
(extend<DFP_ALL:mode><BFP:mode>2): Rename to
extend<DFP_ALL:mode><BFP:mode>2<BFP:tf_fpr>.
(add<mode>3): Rename to add<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(*add<mode>3_cc): Use type instead of mode with fsimp.
(*add<mode>3_cconly): Likewise.
(sub<mode>3): Rename to sub<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(*sub<mode>3_cc): Use type instead of mode with fsimp.
(*sub<mode>3_cconly): Likewise.
(mul<mode>3): Rename to mul<mode>3<tf_fpr>, use type instead of
mode with fsimp.
(fma<mode>4): Restrict using s390_fma_allowed_p.
(fms<mode>4): Restrict using s390_fma_allowed_p.
(div<mode>3): Rename to div<mode>3<tf_fpr>, use type instead of
mode with fdiv.
(neg<mode>2): Rename to neg<mode>2<tf_fpr>.
(*neg<mode>2_cc): Use type instead of mode with fsimp.
(*neg<mode>2_cconly): Likewise.
(*neg<mode>2_nocc): Likewise.
(*neg<mode>2): Likeiwse.
(abs<mode>2): Rename to abs<mode>2<tf_fpr>, use type instead of
mode with fdiv.
(*abs<mode>2_cc): Use type instead of mode with fsimp.
(*abs<mode>2_cconly): Likewise.
(*abs<mode>2_nocc): Likewise.
(*abs<mode>2): Likewise.
(*negabs<mode>2_cc): Likewise.
(*negabs<mode>2_cconly): Likewise.
(*negabs<mode>2_nocc): Likewise.
(*negabs<mode>2): Likewise.
(sqrt<mode>2): Rename to sqrt<mode>2<tf_fpr>, use type instead
of mode with fsqrt.
(cbranch<mode>4): Use FP_ANYTF instead of FP.
(copysign<mode>3): Rename to copysign<mode>3<tf_fpr>, use type
instead of mode with fsimp.
* config/s390/s390.opt (flag_vx_long_double_fma): New
undocumented option.
* config/s390/vector.md (V_HW): Add TF for z14+.
(V_HW2): Likewise.
(VFT): Likewise.
(VF_HW): Likewise.
(V_128): Likewise.
(tf_vr): New mode_attr.
(tointvec): Add TF.
(mov<mode>): Rename to mov<mode><tf_vr>.
(movetf): New dispatcher.
(*vec_tf_to_v1tf): Rename to *vec_tf_to_v1tf_fpr, restrict to
z13-.
(*vec_tf_to_v1tf_vr): New pattern for z14+.
(*fprx2_to_tf): Likewise.
(*mov_tf_to_fprx2_0): Likewise.
(*mov_tf_to_fprx2_1): Likewise.
(add<mode>3): Rename to add<mode>3<tf_vr>.
(addtf3): New dispatcher.
(sub<mode>3): Rename to sub<mode>3<tf_vr>.
(subtf3): New dispatcher.
(mul<mode>3): Rename to mul<mode>3<tf_vr>.
(multf3): New dispatcher.
(div<mode>3): Rename to div<mode>3<tf_vr>.
(divtf3): New dispatcher.
(sqrt<mode>2): Rename to sqrt<mode>2<tf_vr>.
(sqrttf2): New dispatcher.
(fma<mode>4): Restrict using s390_fma_allowed_p.
(fms<mode>4): Likewise.
(neg_fma<mode>4): Likewise.
(neg_fms<mode>4): Likewise.
(neg<mode>2): Rename to neg<mode>2<tf_vr>.
(negtf2): New dispatcher.
(abs<mode>2): Rename to abs<mode>2<tf_vr>.
(abstf2): New dispatcher.
(float<mode>tf2_vr): New forwarder.
(float<mode>tf2): New dispatcher.
(floatuns<mode>tf2_vr): New forwarder.
(floatuns<mode>tf2): New dispatcher.
(fix_trunctf<mode>2_vr): New forwarder.
(fix_trunctf<mode>2): New dispatcher.
(fixuns_trunctf<mode>2_vr): New forwarder.
(fixuns_trunctf<mode>2): New dispatcher.
(<FPINT:fpint_name><VF_HW:mode>2<VF_HW:tf_vr>): New pattern.
(<FPINT:fpint_name>tf2): New forwarder.
(rint<mode>2<tf_vr>): New pattern.
(rinttf2): New forwarder.
(*trunctfdf2_vr): New pattern.
(trunctfdf2_vr): New forwarder.
(trunctfdf2): New dispatcher.
(trunctfsf2_vr): New forwarder.
(trunctfsf2): New dispatcher.
(extenddftf2_vr): New pattern.
(extenddftf2): New dispatcher.
(extendsftf2_vr): New forwarder.
(extendsftf2): New dispatcher.
(signbittf2_vr): New forwarder.
(signbittf2): New dispatchers.
(isinftf2_vr): New forwarder.
(isinftf2): New dispatcher.
* config/s390/vx-builtins.md (*vftci<mode>_cconly): Use VF_HW
instead of VECF_HW, add missing constraint, add vw support.
(vftci<mode>_intcconly): Use VF_HW instead of VECF_HW.
(*vftci<mode>): Rename to vftci<mode>, use VF_HW instead of
VECF_HW, and vw support.
(vftci<mode>_intcc): Use VF_HW instead of VECF_HW.

Fix wrong code for boolean negation in condition at -O2

The problem is the bitwise/logical dichotomy for operators and the
transition from the former to the latter for boolean types: if they
are 1-bit, that's straightforward but, if they are larger, then you
need to be careful because you cannot, on the one hand, turn a bitwise
AND into a logical AND and, on the other hand, *not* turn e.g. a
bitwise NOT into a logical NOT if they occur in the same computation,
as the first change will drop the masking that may need to be applied
after the bitwise NOT if it is not also changed.

Given that the ranger turns bitwise AND/OR into logical AND/OR for
booleans,  the patch does the same for bitwise NOT.

gcc/ChangeLog:
* range-op.cc (operator_logical_not::fold_range): Tidy up.
(operator_logical_not::op1_range): Call above method.
(operator_bitwise_not::fold_range): If the type is compatible
with boolean, call op_logical_not.fold_range.
(operator_bitwise_not::op1_range): If the type is compatible
with boolean, call op_logical_not.op1_range.

gcc/testsuite/ChangeLog:
* gnat.dg/opt88.adb: New test.

More PRE TLC

This makes get_expr_value_id cheap and completes the
constant value-id simplification by turning the constant_value_expressions
into a direct map instead of a set of pre_exprs for the value.

2020-11-10  Richard Biener  <rguenther@suse.de>

* tree-ssa-pre.c (pre_expr_d::value_id): Add.
(constant_value_expressions): Turn into an array of pre_expr.
(get_or_alloc_expr_for_nary): New function.
(get_or_alloc_expr_for_reference): Likewise.
(add_to_value): For constant values only ever add a single
CONSTANT.
(get_expr_value_id): Return the new value_id member.
(vn_valnum_from_value_id): Split out and simplify constant
value id handling.
(get_or_alloc_expr_for_constant): Set the value_id member.
(phi_translate_1): Use get_or_alloc_expr_for_*.
(compute_avail): Likewise.
(bitmap_find_leader): Simplify constant value id handling.

aarch64: Skip arm targets in vq*shr*n_high_n intrinsic tests

These tests should be skipped for arm targets as the instrinsics
are only supported on aarch64.

gcc/testsuite/ChangeLog

2020-11-10  David Candler  <david.candler@arm.com>

* gcc.target/aarch64/advsimd-intrinsics/vqrshrn_high_n.c: Added skip
directive.
* gcc.target/aarch64/advsimd-intrinsics/vqrshrun_high_n.c: Likewise.
* gcc.target/aarch64/advsimd-intrinsics/vqshrn_high_n.c: Likewise.
* gcc.target/aarch64/advsimd-intrinsics/vqshrun_high_n.c: Likewise.

doc: Fix grammar in description of earlyclobber

gcc/ChangeLog:

* doc/md.texi (Modifiers): Fix grammar in description of
earlyclobber constraint modifier.

sccvn: Fix up push_partial_def little-endian bitfield handling [PR97764]

This patch fixes a thinko in the left-endian push_partial_def path.
As the testcase shows, we have 3 bitfields in the struct,
bitoff  bitsize
0       3
3       28
31      1
the corresponding read is the byte at offset 3 (i.e. 24 bits)
and push_partial_def first handles the full store ({}) to all bits
and then is processing the store to the middle bitfield with value of -1.
Here are the interesting spots:
  pd.offset -= offseti;
this adjusts the pd to { -21, 28 }, the (for little-endian lowest) 21
bits aren't interesting to us, we only care about the upper 7.
          len = native_encode_expr (pd.rhs, this_buffer, bufsize,
                                    MAX (0, -pd.offset) / BITS_PER_UNIT);
native_encode_expr has the offset parameter in bytes and we tell it
that we aren't interested in the first (lowest) two bytes of the number.
It encodes 0xff, 0xff with len == 2 then.
      HOST_WIDE_INT size = pd.size;
      if (pd.offset < 0)
        size -= ROUND_DOWN (-pd.offset, BITS_PER_UNIT);
we get 28 - 16, i.e. 12 - the 16 is subtracting those 2 bytes that we
omitted in native_encode_expr.
          size = MIN (size, (HOST_WIDE_INT) needed_len * BITS_PER_UNIT);
needed_len is how many bytes the read at most needs, and that is 1,
so we get size 8 and copy all 8 bits (i.e. a single byte plus nothing)
from the native_encode_expr filled this_buffer; this incorrectly sets
the byte to 0xff when we want 0x7f.  The above line is correct for the
pd.offset >= 0 case when we don't skip anything, but for the pd.offset < 0
case we need to subtract also the remainder of the bits we aren't interested
in (the code shifts the bytes by that number of bits).
If it weren't for the big-endian path, we could as well do
      if (pd.offset < 0)
        size += pd.offset;
but the big-endian path needs it differently.
With the following patch, amnt is 3 and we subtract from 12 the (8 - 3)
bits and thus get the 7 which is the value we want.

2020-11-10  Jakub Jelinek  <jakub@redhat.com>

PR tree-optimization/97764
* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): For
little-endian stores with negative pd.offset, subtract
BITS_PER_UNIT - amnt from size if amnt is non-zero.

* gcc.c-torture/execute/pr97764.c: New test.

Fortran: Fix function decl's location [PR95847]

gcc/fortran/ChangeLog:

PR fortran/95847
* trans-decl.c (gfc_get_symbol_decl): Do not (re)set the location
of an external procedure.
(build_entry_thunks, generate_coarray_init, create_main_function,
gfc_generate_function_code): Use fndecl's location in BIND_EXPR.

gcc/testsuite/ChangeLog:

PR fortran/95847
* gfortran.dg/coverage.f90: New test.

tree-optimization/97760 - reduction paths with unhandled live stmt

This makes sure we reject reduction paths with a live stmt that
is not the last one altering the value.  This is because we do not
handle this in the epilogue unless there's a scalar epilogue loop.

2020-11-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97760
* tree-vect-loop.c (check_reduction_path): Reject
reduction paths we do not handle in epilogue generation.

* gcc.dg/vect/pr97760.c: New testcase.

Normalize VARYING for -fstrict-enums.

The problem here is that the representation for VARYING in
-fstrict-enums is different between value_range and irange.

The helper function irange::normalize_min_max() will normalize to
VARYING only if setting the range to the entire domain of the
underlying type.  That is, [0, 0xff..ff], not the domain as defined by
-fstrict-enums.  This causes problems because the multi-range version
of varying_p() will return true if the range is the domain as defined
by -fstrict-enums.  Thus, normalize_min_max and varying_p have
different concepts of varying for multi-ranges.

(BTW, legacy ranges are different because they never look at the
extremes of a range to determine varying-ness.  They only look at the
kind field.)

One approach is to change all the code to limit ranges to the domain
in the -fstrict-enums world, but this won't work because there are
various instances of gimple where the values assigned or compared are
beyond the limits of TYPE_{MIN,MAX}_VALUE.  One example is the
addition of 0xffffffff to represent subtraction.

This patch fixes multi-range varying_p() and set_varying() to agree
with the normalization code, using the extremes of the underlying type,
to represent varying.

gcc/ChangeLog:

PR tree-optimization/97767
* value-range.cc (dump_bound_with_infinite_markers): Use
wi::min_value and wi::max_value.
(range_tests_strict_enum): New.
(range_tests): Call range_tests_strict_enum.
* value-range.h (irange::varying_p): Use wi::min_value
and wi::max_value.
(irange::set_varying): Same.
(irange::normalize_min_max): Remove comment.

gcc/testsuite/ChangeLog:

* g++.dg/opt/pr97767.C: New test.

Adjust Keylocker regex pattern for darwin, and add missing aesenc256kl test.

gcc/testsuite/ChangeLog

* gcc.target/i386/keylocker-aesdec128kl.c: Adjust regex patterns.
* gcc.target/i386/keylocker-aesdec256kl.c: Likewise.
* gcc.target/i386/keylocker-aesdecwide128kl.c: Likewise.
* gcc.target/i386/keylocker-aesdecwide256kl.c: Likewise.
* gcc.target/i386/keylocker-aesenc128kl.c: Likewise.
* gcc.target/i386/keylocker-aesencwide128kl.c: Likewise.
* gcc.target/i386/keylocker-aesencwide256kl.c: Likewise.
* gcc.target/i386/keylocker-encodekey128.c: Likewise.
* gcc.target/i386/keylocker-encodekey256.c: Likewise.
* gcc.target/i386/keylocker-aesenc256kl.c: New test.

Fix logical_combine OR operation. Again.

The original fix was incorrect and results in loss of opportunities.
Revert the original fix. When processing logical chains, do not
follow chains outside of the current basic block.  Use the import
value instead.

gcc/
PR tree-optimization/97567
* gimple-range-gori.cc: (gori_compute::logical_combine): False
OR operations should intersect the 2 results.
(gori_compute::compute_logical_operands_in_chain): If def chains
are outside the current basic block, don't follow them.
gcc/testsuite/
* gcc.dg/pr97567-2.c: New.

Daily bump.

c++: DR 1914 - Allow duplicate standard attributes.

Following Joseph's change for C to allow duplicate C2x standard attributes
<https://gcc.gnu.org/pipermail/gcc-patches/2020-October/557272.html>,
this patch does a similar thing for C++.  This is DR 1914, to be resolved by
<wg21.link/p2156>, which is not part of the standard yet, but has wide
support so looks like a shoo-in.  The duplications now produce warnings
instead, but only if the attribute wasn't specified via a macro.

gcc/c-family/ChangeLog:

DR 1914
* c-common.c (attribute_fallthrough_p): Tweak the warning
message.

gcc/cp/ChangeLog:

DR 1914
* parser.c (cp_parser_check_std_attribute): Return bool.  Add a
location_t parameter.  Return true if the attribute wasn't duplicated.
Give a warning instead of an error.  Check more attributes.
(cp_parser_std_attribute_list): Don't add duplicated attributes to
the list.  Pass location to cp_parser_check_std_attribute.

gcc/testsuite/ChangeLog:

DR 1914
* c-c++-common/attr-fallthrough-2.c: Adjust dg-warning.
* g++.dg/cpp0x/fallthrough2.C: Likewise.
* g++.dg/cpp0x/gen-attrs-60.C: Turn dg-error into dg-warning.
* g++.dg/cpp1y/attr-deprecated-2.C: Likewise.
* g++.dg/cpp2a/attr-likely2.C: Adjust dg-warning.
* g++.dg/cpp2a/nodiscard-once.C: Turn dg-error into dg-warning.
* g++.dg/cpp0x/gen-attrs-72.C: New test.

c++: Consider only relevant template arguments in sat_hasher

A large source of cache misses in satisfy_atom is caused by the identity
of an (atom,args) pair within the satisfaction cache being determined by
the entire set of supplied template arguments rather than by the subset
of template arguments that the atom actually depends on.  For instance,
consider

  template <class T> concept range = range_v<T>;
  template <class U> void foo () requires range<U>;
  template <class U, class V> void bar () requires range<U>;

The associated constraints of foo and bar are equivalent: they both
consist of the atom range_v<T> (with mapping T -> U).  But the sat_cache
currently will never reuse a satisfaction value between the two atoms
because foo has one template parameter and bar has two, and the
satisfaction cache conservatively assumes that all template parameters
of the constrained decl are relevant to a satisfaction value of one of
its atoms.

This patch eliminates this assumption and makes the sat_cache instead
care about just the subset of args of an (atom,args) pair that is
relevant to satisfaction.

This patch additionally fixes a seemingly latent bug that was found when
testing against range-v3.  In the testcase concepts-decltype2.C below,
during normalization of f's constraints we end up forming a TARGET_EXPR
whose _SLOT has a DECL_CONTEXT that points to g instead of f because
current_function_decl is not updated before we start normalizing.
This patch fixes this accordingly, and also adds a sanity check to
keep_template_parm to verify each found parameter has a valid index.

With this patch, compile time and memory usage for the cmcstl2 test
test/algorithm/set_symmetric_difference4.cpp drops from 8.5s/1.2GB to
3.5s/0.4GB.

gcc/cp/ChangeLog:

* constraint.cc (norm_info::norm_info): Initialize orig_decl.
(norm_info::orig_decl): New data member.
(normalize_atom): When caching an atom for the first time,
compute a list of template parameters used in the targets of the
parameter mapping and store it in the TREE_TYPE of the mapping.
(get_normalized_constraints_from_decl): Set current_function_decl
appropriately when normalizing.  As an optimization, don't
set up a push_nested_class_guard when decl has no constraints.
(sat_hasher::hash): Use this list to hash only the template
arguments that are relevant to the atom.
(satisfy_atom): Use this list to compare only the template
arguments that are relevant to the atom.
* pt.c (keep_template_parm): Do a sanity check on the parameter's
index when flag_checking.

c++: Use two levels of caching in satisfy_atom

This improves the effectiveness of caching in satisfy_atom by querying
the cache again after we've instantiated the atom's parameter mapping.

Before instantiating its mapping, the identity of an (atom,args) pair
within the satisfaction cache is determined by idiosyncratic things like
the level and index of each template parameter used in targets of the
parameter mapping.  For example, the associated constraints of foo in

  template <class T> concept range = range_v<T>;
  template <class U, class V> void foo () requires range<U> && range<V>;

are range_v<T> (with mapping T -> U) /\ range_v<T> (with mapping T -> V).
If during satisfaction the template arguments supplied for U and V are
the same, then the satisfaction value of these two atoms will be the
same (despite their uninstantiated parameter mappings being different).

But sat_cache doesn't see this because it compares the uninstantiated
parameter mapping and the supplied template arguments of sat_entry's
independently.  So satisy_atom on this latter atom will end up fully
evaluating it instead of reusing the satisfaction value of the former.

But there is a point when the two atoms do look the same to sat_cache,
and that's after instantiating their parameter mappings.  By querying
the cache again at this point, we can avoid substituting the same
instantiated parameter mapping into the same expression a second time
around.

With this patch, compile time and memory usage for the cmcstl2 test
test/algorithm/set_symmetric_diference4.cpp drops from 11s/1.4GB to
8.5s/1.2GB with an --enable-checking=release compiler.

gcc/cp/ChangeLog:

* cp-tree.h (ATOMIC_CONSTR_MAP_INSTANTIATED_P): Define this flag
for ATOMIC_CONSTRs.
* constraint.cc (sat_hasher::hash): Use hash_atomic_constraint
if the flag is set, otherwise keep using a pointer hash.
(sat_hasher::equal): Return false if the flag's setting differs
on two atoms.  Call atomic_constraints_identical_p if the flag
is set, otherwise keep using a pointer equality test.
(satisfy_atom): After instantiating the parameter mapping, form
another ATOMIC_CONSTR using the instantiated mapping and query
the cache again.  Cache the satisfaction value of both atoms.
(diagnose_atomic_constraint): Simplify now that the supplied
atom has an instantiated mapping.

c++: Reuse identical ATOMIC_CONSTRs during normalization

Profiling revealed that sat_hasher::equal accounts for nearly 40% of
compile time in some cmcstl2 tests.

This patch eliminates this bottleneck by caching the ATOMIC_CONSTRs
returned by normalize_atom.  This in turn allows us to replace the
expensive atomic_constraints_identical_p check in sat_hasher::equal
with cheap pointer equality, with no loss in cache hit rate.

With this patch, compile time for the cmcstl2 test
test/algorithm/set_symmetric_difference4.cpp drops from 19s to 11s with
an --enable-checking=release compiler.

gcc/cp/ChangeLog:

* constraint.cc (atom_cache): Define this deletable hash_table.
(normalize_atom): Use it to cache ATOMIC_CONSTRs when not
generating diagnostics.
(sat_hasher::hash): Use htab_hash_pointer instead of
hash_atomic_constraint.
(sat_hasher::equal): Test for pointer equality instead of
atomic_constraints_identical_p.
* cp-tree.h (struct atom_hasher): Moved and renamed from ...
* logic.cc (struct constraint_hash): ... here.
(clause::m_set): Adjust accordingly.

c++: Fix ICE with variadic concepts and aliases [PR93907]

This patch (naively) extends the PR93907 fix to also apply to variadic
concepts invoked with a type argument pack.  Without this, we ICE on
the below testcase (a variadic version of concepts-using2.C) in the same
manner as we used to on concepts-using2.C before r10-7133.

gcc/cp/ChangeLog:

PR c++/93907
* constraint.cc (tsubst_parameter_mapping): Also canonicalize
the type arguments of a TYPE_ARGUMENT_PACk.

gcc/testsuite/ChangeLog:

PR c++/93907
* g++.dg/cpp2a/concepts-using3.C: New test, based off of
concepts-using2.C.

MAINTAINERS: Add myself for write after approval

2020-11-09  Pat Bernardi  <bernardi@adacore.com>

* MAINTAINERS (Write After Approval): Add myself.

libstdc++: Remove <debug/array>

Add _GLIBCXX_ASSERTIONS assert in normal std::array and remove __gnu_debug::array
implementation.

libstdc++-v3/ChangeLog:

* include/debug/array: Remove.
* include/Makefile.am: Remove <debug/array>.
* include/Makefile.in: Regenerate.
* include/experimental/functional: Adapt.
* include/std/array: Move to _GLIBCXX_INLINE_VERSION namespace.
* include/std/functional: Adapt.
* include/std/span: Adapt.
* testsuite/23_containers/array/debug/back1_neg.cc:
Remove dg-require-debug-mode. Add -D_GLIBCXX_ASSERTIONS option.
* testsuite/23_containers/array/debug/back2_neg.cc: Likewise.
* testsuite/23_containers/array/debug/front1_neg.cc: Likewise.
* testsuite/23_containers/array/debug/front2_neg.cc: Likewise.
* testsuite/23_containers/array/debug/square_brackets_operator1_neg.cc:
Likewise.
* testsuite/23_containers/array/debug/square_brackets_operator2_neg.cc:
Likewise.
* testsuite/23_containers/array/element_access/60497.cc
* testsuite/23_containers/array/tuple_interface/get_debug_neg.cc:
Remove.
* testsuite/23_containers/array/tuple_interface/get_neg.cc
* testsuite/23_containers/array/tuple_interface/tuple_element_debug_neg.cc
* testsuite/23_containers/array/tuple_interface/tuple_element_neg.cc

c++: Call tsubst_pack_expansion from tsubst.

This was unnecessary (and incomplete) code duplication.

gcc/cp/ChangeLog:

* pt.c (tsubst): Replace *_ARGUMENT_PACK code with
a call to tsubst_argument_pack.

c++: Improve error location for class using-decl.

We should use the location of the using-declaration, not the location of the
class.

gcc/cp/ChangeLog:

* class.c (handle_using_decl): Add an iloc_sentinel.

gcc/testsuite/ChangeLog:

* g++.dg/lookup/using26.C: Adjust location.
* g++.old-deja/g++.other/using1.C: Adjust location.

libstdc++: Make _GLIBCXX_DEBUG checks constexpr compatible

libstdc++-v3/ChangeLog:

* include/debug/assertions.h (__glibcxx_requires_non_empty_range):
Remove __builtin_expect.
(__glibcxx_requires_subscript): Likewise.
(__glibcxx_requires_nonempty): Likewise.
* include/debug/formatter.h (__check_singular): Add C++11 constexpr
qualification.
* include/debug/helper_functions.h (__check_singular): Likewise. Skip
check if constant evaluated.
(__valid_range): Do not skip check if constant evaluated.
* include/debug/macros.h (_GLIBCXX_DEBUG_VERIFY_COND_AT): Add
__builtin_expect.
(_GLIBCXX_DEBUG_VERIFY_AT_F): Use __glibcxx_assert_1.
* testsuite/21_strings/basic_string_view/element_access/char/back_constexpr_neg.cc:
New test.
* testsuite/21_strings/basic_string_view/element_access/char/constexpr.cc: New test.
* testsuite/21_strings/basic_string_view/element_access/char/constexpr_neg.cc: New test.
* testsuite/21_strings/basic_string_view/element_access/char/front_back_constexpr.cc:
New test.
* testsuite/21_strings/basic_string_view/element_access/char/front_constexpr_neg.cc:
New test.
* testsuite/21_strings/basic_string_view/element_access/wchar_t/back_constexpr_neg.cc:
New test.
* testsuite/21_strings/basic_string_view/element_access/wchar_t/constexpr.cc: New test.
* testsuite/21_strings/basic_string_view/element_access/wchar_t/constexpr_neg.cc: New test.
* testsuite/21_strings/basic_string_view/element_access/wchar_t/front_constexpr_neg.cc:
New test.
* testsuite/25_algorithms/lower_bound/debug/constexpr_partitioned_neg.cc: New test.
* testsuite/25_algorithms/lower_bound/debug/constexpr_partitioned_pred_neg.cc: New test.
* testsuite/25_algorithms/lower_bound/debug/constexpr_valid_range_neg.cc: New test.
* testsuite/25_algorithms/lower_bound/debug/partitioned_neg.cc: New test.
* testsuite/25_algorithms/lower_bound/debug/partitioned_pred_neg.cc: New test.
* testsuite/25_algorithms/upper_bound/debug/constexpr_partitioned_neg.cc: New test.
* testsuite/25_algorithms/upper_bound/debug/constexpr_partitioned_pred_neg.cc: New test.
* testsuite/25_algorithms/upper_bound/debug/constexpr_valid_range_neg.cc: New test.
* testsuite/25_algorithms/upper_bound/debug/partitioned_neg.cc: New test.
* testsuite/25_algorithms/upper_bound/debug/partitioned_pred_neg.cc: New test.

c++: Fix -Wvexing-parse ICE with omitted int [PR97762]

For declarations like

  long f();

decl_specifiers->type will be NULL, but I neglected to handle this case,
therefore we ICE.  So handle this case by pretending we've seen 'int',
which is good enough for -Wvexing-parse's purposes.

gcc/cp/ChangeLog:

PR c++/97762
* parser.c (warn_about_ambiguous_parse): Handle the case when
there is no type in the decl-specifiers.

gcc/testsuite/ChangeLog:

PR c++/97762
* g++.dg/warn/Wvexing-parse8.C: New test.

c-family: Avoid unnecessary work when -Wpragmas is being ignored

This speeds up handle_pragma_diagnostic by avoiding computing a spelling
suggestion for an unrecognized option inside a #pragma directive when
-Wpragmas warnings are being suppressed.

In the range-v3 library, which contains many instances of

  #pragma GCC diagnostic push
  #pragma GCC diagnostic ignored "-Wpragmas"
  #pragma GCC diagnostic ignored "-Wfoo"
  ...
  #pragma GCC diagnostic pop

(where -Wfoo stands for a warning option we don't recognize), this
reduces compile time by 33% for some of its tests.

gcc/c-family/ChangeLog:

* c-pragma.c (handle_pragma_diagnostic): Split the
unknown-option -Wpragmas diagnostic into a warning and a
subsequent note containing a spelling suggestion.  Avoid
computing the suggestion if -Wpragmas warnings are being
suppressed.

gcc/testsuite/ChangeLog:

* gcc.dg/pragma-diag-6.c: Adjust expected diagnostics
accordingly.

c-family: Fix regression in location-overflow-test-1.c [PR97117]

The r11-3266 patch that added macro support to -Wmisleading-indentation
accidentally suppressed the column-tracking diagnostic in
get_visual_column in some cases, e.g. in the location-overflow-test-1.c
testcase.

More generally, when all three tokens are on the same line and we've run
out of locations with column info, then their location_t values will be
equal, and we exit early from should_warn_for_misleading_indentation due
to the new check

  /* Give up if the loci are not all distinct.  */
  if (guard_loc == body_loc || body_loc == next_stmt_loc)
    return false;

before we ever call get_visual_column.

[ This new check is needed to detect and give up on analyzing code
  fragments where exactly two out of the three tokens come from the same
  macro expansion, e.g.

    #define MACRO \
      if (a)      \
        foo ();

    MACRO; bar ();

  Here, guard_loc and body_loc will be equal and point to the macro
  expansion point (and next_stmt_loc will point to 'bar').  The heuristics
  that the warning uses are not really valid in scenarios like these.  ]

In order to restore the column-tracking diagnostic, this patch moves the
the diagnostic code out from get_visual_column to earlier in
should_warn_for_misleading_indentation.  Moreover, it tests the three
locations for a zero column all at once, which I suppose should make us
issue the diagnostic more consistently.

gcc/c-family/ChangeLog:

PR testsuite/97117
* c-indentation.c (get_visual_column): Remove location_t
parameter.  Move the column-tracking diagnostic code from here
to ...
(should_warn_for_misleading_indentation): ... here, before the
early exit for when the loci are not all distinct.  Don't pass a
location_t argument to get_visual_column.
(assert_get_visual_column_succeeds): Don't pass a location_t
argument to get_visual_column.
(assert_get_visual_column_fails): Likewise.

arc: Improve/add instruction patterns to better use MAC instructions.

ARC MYP7+ instructions adds MAC instructions for either vector and
scalar data types. This patch adds a madd pattern for 16it datum using
the 32bit MAC instruction, and dot_prod patterns for v4hi vector
types. The 64bit moves are also upgraded by using vadd2 instuction.

2020-11-09  Claudiu Zissulescu  <claziss@synopsys.com>

gcc/

* config/arc/arc.c (arc_split_move): Recognize vadd2 instructions.
* config/arc/arc.md (movdi_insn): Update pattern to use vadd2
instructions.
(movdf_insn): Likewise.
(maddhisi4): New pattern.
(umaddhisi4): Likewise.
* config/arc/simdext.md (mov<mode>_int): Update pattern to use
vadd2.
(sdot_prodv4hi): New pattern.
(udot_prodv4hi): Likewise.
(arc_vec_<V_US>mac_hi_v4hi): Update/renamed to
arc_vec_<V_US>mac_v2hiv2si.
(arc_vec_<V_US>mac_v2hiv2si_zero): New pattern.
* config/arc/constraints.md (Ral): Accumulator register
constraint.

Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>

Clean up irange self tests.

Currently we have all the irange and range-op tests in range-op.cc.
This patch splits them up into the appropriate file (irange
tests in value-range.cc and range-op tests in range-op.cc).  The patch
also splits up the tests themselves by functionality.  It's not perfect,
but significantly better than the mess we had.

gcc/ChangeLog:

* function-tests.c (test_ranges): Call range_op_tests.
* range-op.cc (build_range3): Move to value-range.cc.
(range3_tests): Same.
(int_range_max_tests): Same.
(multi_precision_range_tests): Same.
(range_tests): Same.
(operator_tests): Split up...
(range_op_tests): Split up...
(range_op_cast_tests): ...here.
(range_op_lshift_tests): ...here.
(range_op_rshift_tests): ...here.
(range_op_bitwise_and_tests): ...here.
* selftest.h (range_op_tests): New.
* value-range.cc (build_range3): New.
(range_tests_irange3): New.
(range_tests_int_range_max): New.
(range_tests_legacy): New.
(range_tests_misc): New.
(range_tests): New.

Fortran: Fix OpenACC in specification-part checks [PR90111]

OpenACC's routine and declare directives can appear anywhere in the
specification part, i.e. before/after use-stmts, import-stmt, implicit-part,
or declaration-constructs.

gcc/fortran/ChangeLog:

PR fortran/90111
* parse.c (case_decl): Move ST_OACC_ROUTINE and ST_OACC_DECLARE to ...
(case_omp_decl): ... here.
(verify_st_order): Update comment.

gcc/testsuite/ChangeLog:

PR fortran/90111
* gfortran.dg/goacc/specification-part.f90: New test.

libstdc++: Improve comment on _Power_of_2 helper function

libstdc++-v3/ChangeLog:

* include/bits/uniform_int_dist.h (__detail::_Power_of_2):
Document that true result for zero is intentional.

libstdc++: Remove redundant check for zero in std::__popcount

The popcount built-ins work fine for zero, so there's no need to check
for it.

libstdc++-v3/ChangeLog:

* include/std/bit (__popcount): Remove redundant check for zero.

tree-optimization/97761 - fix SLP live calculation

This removes a premature end of the DFS walk.

2020-11-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97761
* tree-vect-slp.c (vect_bb_slp_mark_live_stmts): Remove
premature end of DFS walk.

* gfortran.dg/vect/pr97761.f90: New testcase.

Cleanup irange::set.

[This is actually part of a larger patch that actually changes
behavior, but I thought I'd commit the non-invasive cleanups first
which will simplify the upcoming work.]

irange::set was doing more work than it should for legacy ranges.
I cleaned up various unnecessary calls to swap_out_of_order_endpoints,
as well as some duplicate code that could be done with normalize_min_max.

I also removed an obsolete comment wrt sticky infinite overflows.
Not only did the -INF/+INF(OVF) code get removed in 2017,
but normalize_min_max() uses wide ints, which ignored overflows
altogether.

gcc/ChangeLog:

* value-range.cc (irange::swap_out_of_order_endpoints): Rewrite
into static function.
(irange::set): Cleanup redundant manipulations.
* value-range.h (irange::normalize_min_max): Modify object
in-place instead of modifying arguments.

aarch64: Do not alter force_reg returned register expanding fcmla

2020-11-06  Andrea Corallo  <andrea.corallo@arm.com>

* config/aarch64/aarch64-builtins.c
(aarch64_expand_fcmla_builtin): Do not alter force_reg returned
register.

libstdc++: Use 'inline' consistently in std::exception_ptr [PR 97729]

With PR c++/67453 fixed we can rely on the 'used' attribute to emit
inline constructors and destructors in libsupc++/eh_ptr.cc. This means
we don't need to suppress the 'inline' keyword on them in that file, and
don't need to force 'always_inline' on them in other files.

libstdc++-v3/ChangeLog:

PR libstdc++/97729
* libsupc++/exception_ptr.h (exception_ptr::exception_ptr())
(exception_ptr::exception_ptr(const exception_ptr&))
(exception_ptr::~exception_ptr()): Remove 'always_inline'
attributes. Use 'inline' unconditionally.

libstdc++: Include <typeinfo> even for -fno-rtti [PR 97758]

The std::function code now uses std::type_info* even when RTTI is
disabled, so it should include <typeinfo> unconditionally. Without this,
Clang can't compile <functional> with -fno-rtti (it works with GCC
because std::type_info gets declared automatically by the compiler).

libstdc++-v3/ChangeLog:

PR libstdc++/97758
* include/bits/std_function.h [!__cpp_rtti]: Include <typeinfo>.

config-ml.in: Suppress output from multi-do recipes

The FIXME comments saying "Leave out until this is tested a bit more"
are from 1997. I think they've been sufficiently tested.

ChangeLog:

* config-ml.in (multi-do, multi-clean): Add @ to silence recipes.
Remove FIXME comments.

tree-optimization/97753 - fix SLP induction vect

This fixes updating of the step vectors when filling up to group_size.

2020-11-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97753
* tree-vect-loop.c (vectorizable_induction): Fill vec_steps
when CSEing inside the group.

* gcc.dg/vect/pr97753.c: New testcase.

tree-optimization/97746 - fix order of mask precision computes

This fixes the order of walking PHIs and stmts for BB mask
precision compute.

2020-11-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97746
* tree-vect-patterns.c (vect_determine_precisions): First walk PHIs.

* gcc.dg/vect/bb-slp-pr97746.c: New testcase.

c++: ADL refactor

This refactors the ADL lookup.  It just so happens the refactoring
makes dropping modules in simpler :) We break apart the namespace and
class fn processing, and move scope iteration to an outer function.
It'll also become possible to find the same enum in multiple place, so
we need to handle that idempotently.

gcc/cp/
* cp-tree.h (LOOKUP_FOUND_P): Add ENUMERAL_TYPE.
* name-lookup.c (class name_lookup): Add comments.
(name_lookup::adl_namespace_only): Replace with ...
(name_lookup::adl_class_fns): ... this and ...
(name_lookup::adl_namespace_fns): ... this.
(name_lookup::adl_namespace): Deal with inline nests here.
(name_lookup::adl_class): Complete the type here.
(name_lookup::adl_type): Call broken-out enum ..
(name_lookup::adl_enum): New.  No need to call the namespace adl
if it is class-scope.
(name_lookup::search_adl): Iterate over collected scopes here.

c++: Consistently expose singleton overloads

This is a patch from my name-lookup overhaul.  I noticed the parser
and one path in name-lookup looked through an overload of a single
known decl.  It seems more consistent to do that in both paths through
name-lookup, and not in the parser itself.

gcc/cp/
* name-lookup.c (lookup_qualified_name): Expose an overload of a
singleton with known type.
(lookup_name_1): Just check the overload's type to expose it.
* parser.c (cp_parser_lookup_name): Do not do that check here.

CSE VN_INFO calls in PRE and VN

The following CSEs VN_INFO calls which nowadays are hashtable queries.

2020-11-09  Richard Biener  <rguenther@suse.de>

* tree-ssa-pre.c (get_representative_for): CSE VN_INFO calls.
(create_expression_by_pieces): Likewise.
(insert_into_preds_of_block): Likewsie.
(do_pre_regular_insertion): Likewsie.
* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_insert):
Likewise.
(eliminate_dom_walker::eliminate_stmt): Likewise.

Use a per-edge PRE PHI translation cache

This changes the phi translation cache to be per edge which
pushes it off the profiling radar.  For larger testcases the
combined hashtable causes a load of cache misses and making it
per edge allows to shrink the entry further.

2020-11-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/97765
* tree-ssa-pre.c (bb_bitmap_sets::phi_translate_table): Add.
(PHI_TRANS_TABLE): New macro.
(phi_translate_table): Remove.
(expr_pred_trans_d::pred): Remove.
(expr_pred_trans_d::hash): Simplify.
(expr_pred_trans_d::equal): Likewise.
(phi_trans_add): Adjust.
(phi_translate): Likewise.  Remove hash-table expansion
detection and optimization.
(phi_translate_set): Allocate PHI_TRANS_TABLE here.
(init_pre): Adjsust.
(fini_pre): Free PHI_TRANS_TABLE.

arm: [testcase] Better narrow some bfloat16 testcase

2020-11-05  Andrea Corallo  <andrea.corallo@arm.com>

* gcc.target/arm/simd/vld1_lane_bf16_1.c: Require target to
support and add -mfloat-abi=hard flag.
* gcc.target/arm/simd/vld1_lane_bf16_indices_1.c: Likewise.
* gcc.target/arm/simd/vld1q_lane_bf16_indices_1.c: Likewise.
* gcc.target/arm/simd/vst1_lane_bf16_1.c: Likewise.
* gcc.target/arm/simd/vst1_lane_bf16_indices_1.c: Likewise.
* gcc.target/arm/simd/vstq1_lane_bf16_indices_1.c: Likewise.