binutils-gdb.git
15 years ago * NEWS: Mention non-stop mode.
Pedro Alves [Sun, 4 Oct 2009 17:39:30 +0000 (17:39 +0000)]
* NEWS: Mention non-stop mode.

15 years ago * gdb.texinfo (Remote Protocol): Don't mention vCont;T.
Pedro Alves [Sun, 4 Oct 2009 17:37:57 +0000 (17:37 +0000)]
* gdb.texinfo (Remote Protocol): Don't mention vCont;T.

15 years ago * gdbinit.in: Set data-directory to @srcdir@.
Pedro Alves [Sun, 4 Oct 2009 13:50:08 +0000 (13:50 +0000)]
* gdbinit.in: Set data-directory to @srcdir@.

15 years ago*** empty log message ***
gdbadmin [Sun, 4 Oct 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

15 years agodaily update
Alan Modra [Sat, 3 Oct 2009 23:00:05 +0000 (23:00 +0000)]
daily update

15 years agoRevert the last change.
H.J. Lu [Sat, 3 Oct 2009 17:00:16 +0000 (17:00 +0000)]
Revert the last change.

15 years ago2009-10-03 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Sat, 3 Oct 2009 14:36:34 +0000 (14:36 +0000)]
2009-10-03  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am ($(srcdir)/rx-decode.c): Add @MAINT@.
(rx-dis.lo): Remove a space.
(pc2c$(EXEEXT)): Remove a space. Use $(LINK_FOR_BUILD) instead
of gcc.
(MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
* Makefile.in: Regenerated.

15 years ago * arm-dis.c (print_insn): Check symtab_size not *symtab.
Alan Modra [Sat, 3 Oct 2009 00:39:53 +0000 (00:39 +0000)]
* arm-dis.c (print_insn): Check symtab_size not *symtab.

15 years agodaily update
Alan Modra [Sat, 3 Oct 2009 00:00:05 +0000 (00:00 +0000)]
daily update

15 years ago*** empty log message ***
gdbadmin [Sat, 3 Oct 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

15 years ago * remove unwanted directory parts
Pierre Muller [Fri, 2 Oct 2009 22:39:41 +0000 (22:39 +0000)]
 * remove unwanted directory parts

15 years ago * lib/gdb.exp (gdb_compile): Add --enable-auto-import option for
Pierre Muller [Fri, 2 Oct 2009 22:25:26 +0000 (22:25 +0000)]
* lib/gdb.exp (gdb_compile): Add --enable-auto-import option for
mingw and cygwin targets.

15 years ago * lib/gdb.exp (gdb_compile): Avoid adding
Pierre Muller [Fri, 2 Oct 2009 21:28:34 +0000 (21:28 +0000)]
* lib/gdb.exp (gdb_compile): Avoid adding
gdb_saved_unbuffered_mode_obj if -nostdlib option is used.

15 years ago2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Fri, 2 Oct 2009 19:03:40 +0000 (19:03 +0000)]
2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Drop Disp64 on jump and loop instructions.
* i386-tbl.h: Regenerated.

15 years agomerge from gcc
DJ Delorie [Fri, 2 Oct 2009 18:23:01 +0000 (18:23 +0000)]
merge from gcc

15 years ago * linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
Pedro Alves [Fri, 2 Oct 2009 16:51:04 +0000 (16:51 +0000)]
* linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
(SYSCALL_SIGTRAP): New.
(status_to_str): Adjust.
(get_pending_status): Pending events in lp->waitstatus don't map
to any signal.  Simplify.
(linux_handle_syscall_trap): New.
(linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
events, use linux_ops->to_resume instead of direct ptrace with
PTRACE_CONT.  Remove all TRAP_IS_SYSCALL handling.
(wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
and clear the sysgood bit.
(status_callback): Make it clearer and add comments.
(cancel_breakpoints_callback): Ignore if LP has waitstatus set.
(linux_nat_filter_event): Handle syscall traps with
linux_handle_syscall_trap, and clear the sysgood bit.  Move the
check for storing siginfo to after handling extended statuses and
syscall traps.  Store status in the lwp object.
(linux_wait_1): Don't swap the pending status out of the lwp
object until after deciding we found an lwp with an interesting
event.  Requeue a new pending signal if we find one while getting
rid or a pending SIGSTOP we sent ourselves.  Don't clear the
sysgood bit here.

* infrun.c (deal_with_syscall_event): Rename to ...
(handle_syscall_event): ... this.  Always context switch and set
stop_pc, even if not catching the syscall.  If not catching the
syscall, always resume with keep_going.
(handle_inferior_event): Adjust.

15 years agogdb/
Jan Kratochvil [Fri, 2 Oct 2009 16:02:34 +0000 (16:02 +0000)]
gdb/
Fix compatibility of --with-system-readline and readline-6.0+.
* configure.ac <--with-system-readline> (for readline_echoing_p): New
test.
* config.in: Regenerate.
* configure: Regenerate.

15 years ago2009-10-02 Ralf Corsepius <ralf.corsepius@rtems.org>
Tom Tromey [Fri, 2 Oct 2009 15:43:17 +0000 (15:43 +0000)]
2009-10-02  Ralf Corsepius <ralf.corsepius@rtems.org>

* Make-common.in: Add datarootdir.

15 years agotypo fix
Alan Modra [Fri, 2 Oct 2009 15:35:01 +0000 (15:35 +0000)]
typo fix

15 years agold/
Alan Modra [Fri, 2 Oct 2009 15:00:30 +0000 (15:00 +0000)]
ld/
* emultempl/ppc32elf.em (emit_stub_syms): Init to -1.
(ppc_after_open): Set emit_stubs_syms by default when shared.
(OPTION_NO_STUBSYMS): Define.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-emit-stub-syms.
* emultempl/ppc64elf.em (emit_stub_syms): Init to -1.
(gld${EMULATION_NAME}_finish): Set emit_stubs_syms by default.
(OPTION_NO_STUBSYMS): Define.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Handle --no-emit-stub-syms.
ld/testsuite/
* ld-powerpc/tlsexe.d: Update.
* ld-powerpc/tlsexe.r: Update.
* ld-powerpc/tlsexetoc.d: Update.
* ld-powerpc/tlsexetoc.r: Update.
* ld-powerpc/tlsso.d: Update.
* ld-powerpc/tlsso.r: Update.
* ld-powerpc/tlstocso.d: Update.
* ld-powerpc/tlstocso.r: Update.

15 years agogas/
Peter Bergner [Fri, 2 Oct 2009 14:42:42 +0000 (14:42 +0000)]
gas/
* config/tc-ppc.c (md_show_usage): Document -m476.
* doc/c-ppc.texi (PowerPC-Opts): Document -m476.

gas/testsuite/
* gas/ppc/476.s: New test.
* gas/ppc/476.d: Likewise.
* gas/ppc/ppc.exp: Run the 476 test.

include/opcode/
* ppc.h (PPC_OPCODE_476): Define.

opcodes/
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.

15 years agoinclude/aout/
Alan Modra [Fri, 2 Oct 2009 14:40:41 +0000 (14:40 +0000)]
include/aout/
* aout64.h (N_SHARED_LIB): Define as zero if not already defined.
* sun4.h (N_SHARED_LIB): Define.
* hp300hpux.h (N_SHARED_LIB): Don't define.
bfd/
* aout-cris.c (N_SHARED_LIB): Don't define.
* hp300bsd.c (N_SHARED_LIB): Don't define.
* i386bsd.c (N_SHARED_LIB): Don't define.
* i386linux.c (N_SHARED_LIB): Don't define.
* i386lynx.c (N_SHARED_LIB): Don't define.
* m68klinux.c (N_SHARED_LIB): Don't define.
* m88kmach3.c (N_SHARED_LIB): Don't define.
* mipsbsd.c (N_SHARED_LIB): Don't define.
* newsos3.c (N_SHARED_LIB): Don't define.
* pc532-mach.c (N_SHARED_LIB): Don't define.
* pdp11.c (N_SHARED_LIB): Don't define.
* sparclinux.c (N_SHARED_LIB): Don't define.
* vaxbsd.c (N_SHARED_LIB): Don't define.

15 years ago * dw2gencfi.c: Include dwarf2dbg.h.
Jakub Jelinek [Fri, 2 Oct 2009 11:33:50 +0000 (11:33 +0000)]
* dw2gencfi.c: Include dwarf2dbg.h.
(DWARF2_FORMAT): Define if not defined.
(dot_cfi_sections): New function.
(cfi_pseudo_table): Handle .cfi_sections.
(CFI_EMIT_eh_frame, CFI_EMIT_debug_frame): Define.
(cfi_sections): New variable.
(output_cie, output_fde, select_cie_for_fde): Add eh_frame
argument, add supporting for outputting .debug_frame
section.
(cfi_change_reg_numbers): New function or macro.
(cfi_finish): Only emit .eh_frame if
cfi_sections & CFI_EMIT_eh_frame.  Emit .debug_frame if
cfi_sections & CFI_EMIT_debug_frame.
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Define.
* doc/as.texinfo (CFI directives): Document .cfi_sections.

15 years ago*** empty log message ***
gdbadmin [Fri, 2 Oct 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

15 years agodaily update
Alan Modra [Fri, 2 Oct 2009 00:00:04 +0000 (00:00 +0000)]
daily update

15 years ago * lib/ld-lib.exp (ld_simple_link_defsyms): New proc, adding
Alan Modra [Thu, 1 Oct 2009 23:29:29 +0000 (23:29 +0000)]
* lib/ld-lib.exp (ld_simple_link_defsyms): New proc, adding
powerpc-*-rtems to code setting symbols, extracted from..
* ld-srec/srec.exp (run_srec_test): ..here.  Correct flags for sh64.
* ld-gc/gc.exp (test_gc): Use ld_simple_link_defsyms.

15 years ago * MAINTAINERS: Move Don Lee to the correct section (Write After
Joel Brobecker [Thu, 1 Oct 2009 23:11:02 +0000 (23:11 +0000)]
    * MAINTAINERS: Move Don Lee to the correct section (Write After
        Approval).

15 years ago * src/gdb/testsuite/gdb.base/shr1.c: Use %p in format string.
Pierre Muller [Thu, 1 Oct 2009 21:33:24 +0000 (21:33 +0000)]
* src/gdb/testsuite/gdb.base/shr1.c: Use %p in format string.
* src/gdb/testsuite/gdb.base/unload.c: Avoid warning in fprintf.
* src/gdb/testsuite/gdb.base/watchpoint-solib.c: Idem.

15 years ago2009-10-01 Phil Muldoon <pmuldoon@redhat.com>
Phil Muldoon [Thu, 1 Oct 2009 20:09:21 +0000 (20:09 +0000)]
2009-10-01  Phil Muldoon  <pmuldoon@redhat.com>

* infcall.c (call_function_by_hand): Add a new cleanup branch for
std::terminate breakpoints.

15 years ago * cofflink.c (_bfd_coff_generic_relocate_section): Look for the aux
Dave Korn [Thu, 1 Oct 2009 19:48:12 +0000 (19:48 +0000)]
* cofflink.c (_bfd_coff_generic_relocate_section): Look for the aux
symbol for a weak undef in the auxbfd, not the input bfd.

15 years agogas/
Peter Bergner [Thu, 1 Oct 2009 19:24:48 +0000 (19:24 +0000)]
gas/
* config/tc-ppc.c (md_show_usage): Rename "ppca2" to "a2".
* doc/c-ppc.texi (PowerPC-Opts): Likewise.

gas/testsuite/
* gas/ppc/a2.d: Rename "ppca2" to "a2".

include/opcode/
* ppc.h (PPC_OPCODE_A2): Rename from PPC_OPCODE_PPCA2.

opcodes/
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".

15 years ago * gdb.base/fileio.c (test_lseek): typecast ofs_t ret variable to
Pierre Muller [Thu, 1 Oct 2009 15:39:13 +0000 (15:39 +0000)]
* gdb.base/fileio.c (test_lseek): typecast ofs_t ret variable to
long type.
(test_unlink): Correct printf string.
* gdb.base/checkpoint.c (main): Correct fprintf string for variable i.
* gdb.threads/attachstop-mt.c: Add #include <string.h>.

15 years ago2009-10-01 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Thu, 1 Oct 2009 14:31:43 +0000 (14:31 +0000)]
2009-10-01  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (x86_cons): Reformat.

15 years agobfd/
Ulrich Weigand [Thu, 1 Oct 2009 13:09:56 +0000 (13:09 +0000)]
bfd/
* elf32-spu.c (spu_elf_auto_overlay): Insert icache linker script
after .toe instead of before .text section.  Set the LMA of all
overlay sections to their icache IA address.
(spu_elf_find_overlays): Determine icache set id without reference
to the LMA.

ld/testsuite/
* ld-spu/icache1.d: Update to new section layout.

15 years ago2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
M R Swami Reddy [Thu, 1 Oct 2009 08:19:55 +0000 (08:19 +0000)]
2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>

       * crx-dis.c (match_opcode): Truncate mcode to 32-bit.

15 years ago * addr2line.c (slurp_symtab): Don't use bfd_read_minisymbols.
Alan Modra [Thu, 1 Oct 2009 06:33:15 +0000 (06:33 +0000)]
* addr2line.c (slurp_symtab): Don't use bfd_read_minisymbols.

15 years ago2009-09-30 Doug Kwan <dougkwan@google.com>
Doug Kwan [Thu, 1 Oct 2009 00:58:38 +0000 (00:58 +0000)]
2009-09-30  Doug Kwan  <dougkwan@google.com>

* arm.cc (Target_arm::may_need_copy_reloc): Check for THUMB function
symbol and call Symbol::may_need_copy_reloc to determine if
a copy reloc is needed.
* copy-relocs.cc (Copy_relocs::need_copy_reloc): Return false if -z
nocopyreloc is given in command line.
(Copy_relocs::emit_copy_reloc): Assert that -z nocopyreloc is not
given in command line.
* i386.cc (Target_i386::may_need_copy_reloc): Remove.
(Target_i386::Scan::global): Use Symbol::may_need_copy_reloc instead
of the removed Target_i386::may_need_copy_reloc.
* options.h (copyreloc): New option with default value false.
* powerpc.cc (Target_powerpc::may_need_copy_reloc): Remove.
(Target_powerpc::Scan::global): Use Symbol::may_need_copy_reloc
instead of the removed Target_powerpc::may_need_copy_reloc.
* sparc.cc (Target_powerpc::may_need_copy_reloc): Remove.
(Target_sparc::Scan::global): Use Symbol::may_need_copy_reloc
instead of the removed Target_sparc::may_need_copy_reloc.
* symtab.h (Symbol::may_need_copy_reloc): New method definition.
* x86_64.cc (Target_powerpc::may_need_copy_reloc): Remove.
(Target_x86_64::Scan::global): Use Symbol::may_need_copy_reloc
instead of the removed Target_x86_64::may_need_copy_reloc.

15 years ago*** empty log message ***
gdbadmin [Thu, 1 Oct 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

15 years agodaily update
Alan Modra [Thu, 1 Oct 2009 00:00:04 +0000 (00:00 +0000)]
daily update

15 years ago * object.h (class Object): Remove target_ field, and target,
Ian Lance Taylor [Wed, 30 Sep 2009 22:21:13 +0000 (22:21 +0000)]
* object.h (class Object): Remove target_ field, and target,
sized_target, and set_target methods.
(Object::sized_target): Remove.
(class Sized_relobj): Update declarations.  Remove sized_target.
* object.cc (Sized_relobj::setup): Remove target parameter.
Change all callers.
(Input_objects::add_object): Don't do anything with the target.
(make_elf_sized_object): Add punconfigured parameter.  Change all
callers.  Set or test parameter target.
* dynobj.cc (Sized_dynobj::target): Remove target parameter.
Change all callers.
* parameters.cc (Parameters::set_target): Change parameter type to
be non-const.
(Parameters::default_target): Remove.
(set_parameters_target): Change parameter type to be non-const.
(parameters_force_valid_target): New function.
(parameters_clear_target): New function.
* parameters.h (class Parameters): Update declarations.  Remove
default_target method.  Add sized_target and clear_target
methods.  Change target_ to be non-const.
(set_parameters_target): Update declaration.
(parameters_force_valid_target): Declare.
(parameters_clear_target): Declare.
* readsyms.cc (Read_symbols::do_read_symbols): Pass punconfigured
as NULL if we aren't searching.
(Add_symbols::run): Don't check for compatible target.
* fileread.cc (Input_file::open_binary): Call
parameters_force_valid_target.
* gold.cc (queue_middle_tasks): Likewise.
* plugin.cc (make_sized_plugin_object): Likewise.  Don't call
set_target on object.
* dynobj.h (class Sized_dynobj): Update declarations.
* archive.cc (Archive::get_elf_object_for_member): Return NULL if
make_elf_object returns NULL.
(Archive::include_member): Don't check whether object target is
compatible.
* output.cc (Output_section::add_input_section): Get target from
parameters.
(Output_section::relax_input_section): Likewise.
* reloc.cc (Sized_relobj::do_gc_process_relocs): Get target from
parameters.
(Sized_relobj::do_scan_relocs): Likewise.
(Sized_relobj::relocate_sections): Likewise.
* resolve.cc (Symbol_table::resolve): Likewise.
* symtab.cc (Symbol_table::wrap_symbol): Likewise.  Remove object
parameter.  Change all callers.
(Symbol_table::add_from_object): Get target from parameters.
(Symbol_table::add_from_relobj): Don't check object target.
(Symbol_table::add_from_dynobj): Likewise.
(Symbol_table::define_special_symbol): Get target from
parameters.
* symtab.h (class Symbol_table): Update declaration.
* testsuite/binary_unittest.cc (gold_testsuite): Remove target
parameter.  Change all callers.  Clear parameter target.
(Binary_test): Test target here.
* testsuite/object_unittest.cc (gold_testsuite): Remove
target_test_pointer parameter.  Change all callers.
(Object_test): Test target here.

15 years ago2009-09-30 Tristan Gingold <gingold@adacore.com>
Tristan Gingold [Wed, 30 Sep 2009 13:12:50 +0000 (13:12 +0000)]
2009-09-30  Tristan Gingold  <gingold@adacore.com>

* configure.com: Use hosts/alphavms.h on both alpha and ia64 VMS.

15 years agodaily update
Alan Modra [Wed, 30 Sep 2009 00:00:04 +0000 (00:00 +0000)]
daily update

15 years ago*** empty log message ***
gdbadmin [Wed, 30 Sep 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

15 years ago2009-09-29 Paolo Bonzini <bonzini@gnu.org>
Paolo Bonzini [Tue, 29 Sep 2009 21:31:07 +0000 (21:31 +0000)]
2009-09-29  Paolo Bonzini  <bonzini@gnu.org>

Sync from gcc:
2009-09-26  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

* configure.ac: Update minimum MPC version to 0.7.
* configure: Regenerate.

15 years agogdb/testsuite/
Jan Kratochvil [Tue, 29 Sep 2009 19:24:46 +0000 (19:24 +0000)]
gdb/testsuite/
* gdb.base/breakpoint-shadow.exp: Move the ia64 part into ...
* gdb.arch/ia64-breakpoint-shadow.exp: ... a new file, with new tests.
* gdb.arch/ia64-breakpoint-shadow.S: New file.

15 years ago * gdb.objc/basicclass.exp: Disable pending breakpoint query.
Ulrich Weigand [Tue, 29 Sep 2009 19:02:22 +0000 (19:02 +0000)]
* gdb.objc/basicclass.exp: Disable pending breakpoint query.
* gdb.objc/nondebug.exp: Likewise.

15 years ago * emulparams/m68kelf.sh (NOP): Use 0x4e71 (nop) rather than 0x4e75
Nick Clifton [Tue, 29 Sep 2009 16:28:52 +0000 (16:28 +0000)]
    * emulparams/m68kelf.sh (NOP): Use 0x4e71 (nop) rather than 0x4e75
        (rts).

15 years agogdb/
Jan Kratochvil [Tue, 29 Sep 2009 16:27:05 +0000 (16:27 +0000)]
gdb/
* ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
Check first the descriptor memory is readable.

15 years ago * doc/binutils.texi (c++filt): Remove spurious description of
Nick Clifton [Tue, 29 Sep 2009 15:34:08 +0000 (15:34 +0000)]
    * doc/binutils.texi (c++filt): Remove spurious description of
        nonexistent --java command line switch for cxxfilt.

15 years ago * python/py-value.c (valpy_string): NULL-terminate 'keywords'.
Tom Tromey [Tue, 29 Sep 2009 15:13:45 +0000 (15:13 +0000)]
* python/py-value.c (valpy_string): NULL-terminate 'keywords'.

15 years ago2009-09-29 H.J. Lu <hongjiu.lu@intel.com>
H.J. Lu [Tue, 29 Sep 2009 14:37:57 +0000 (14:37 +0000)]
2009-09-29  H.J. Lu  <hongjiu.lu@intel.com>

* elf64-x86-64.c (elf64_x86_64_append_rela): New.
(elf64_x86_64_relocate_section): Use it.
(elf64_x86_64_finish_dynamic_symbol): Likewise.

15 years agobfd
Nick Clifton [Tue, 29 Sep 2009 14:17:19 +0000 (14:17 +0000)]
bfd
        * Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
        (ALL_MACHINES_CFILES): Add cpu-rx.c.
        (BFD32_BACKENDS): Add elf32-rx.lo.
        (BFD32_BACKENDS_CFILES): Add elf32-rx.c.
        * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
        Export bfd_rx_arch.
        (bfd_archures_list): Add bfd_rx_arch.
        * config.bfd: Add entry for rx-*-elf.
        * configure.in: Add entries for bfd_elf32_rx_le_vec and
        bfd_elf32_rx_be_vec.
        * reloc.c: Add RX relocations.
        * targets.c: Add RX target vectors.
        * Makefile.in: Regenerate.
        * bfd-in2.h: Regenerate.
        * configure: Regenerate.
        * libbfd.h: Regenerate.
        * cpu-rx.c: New file.
        * elf32-rx.c: New file.

binutils
        * readelf.c: Add support for RX target.
        * MAINTAINERS: Add DJ and NickC as maintainers for RX.

gas
        * Makefile.am: Add RX target.
        * configure.in: Likewise.
        * configure.tgt: Likewise.
        * read.c (do_repeat_with_expander): New function.
        * read.h: Provide a prototype for do_repeat_with_expander.
        * doc/Makefile.am: Add RX target documentation.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * Makefile.in: Regenerate.
        * NEWS: Mention support for RX architecture.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * config/rx-defs.h: New file.
        * config/rx-parse.y: New file.
        * config/tc-rx.h: New file.
        * config/tc-rx.c: New file.
        * doc/c-rx.texi: New file.

gas/testsuite
        * gas/rx: New directory.
        * gas/rx/*: New set of test cases.
        * gas/elf/section2.e-rx: New expected output file.
        * gas/all/gas.exp: Add support for RX target.
        * gas/elf/elf.exp: Likewise.
        * gas/lns/lns.exp: Likewise.
        * gas/macros/macros.exp: Likewise.

include
        * dis-asm.h: Add prototype for print_insn_rx.

include/elf
        * rx.h: New file.

include/opcode
        * rx.h: New file.

ld
        * Makefile.am: Add rules to build RX emulation.
        * configure.tgt: Likewise.
        * NEWS: Mention support for RX architecture.
        * Makefile.in: Regenerate.
        * emulparams/elf32rx.sh: New file.
        * emultempl/rxelf.em: New file.

opcodes
        * Makefile.am: Add RX files.
        * configure.in: Add support for RX target.
        * disassemble.c: Likewise.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * opc2c.c: New file.
        * rx-decode.c: New file.
        * rx-decode.opc: New file.
        * rx-dis.c: New file.

15 years agoopcodes/
Peter Bergner [Tue, 29 Sep 2009 13:19:10 +0000 (13:19 +0000)]
opcodes/
* ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
"lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.

gas/testsuite/
* gas/ppc/vsx.s ("lxsdux", "lxvd2ux", "lxvw4ux", "stxsdux",
"stxvd2ux", "stxvw4ux"): Remove tests.
* gas/ppc/vsx.d: Likewise.
* gas/ppc/power7.s: Likewise.
* gas/ppc/power7.d: Likewise.

15 years ago * gdb.base/watchpoints.exp: Respect gdb,no_hardware_watchpoints
Ulrich Weigand [Tue, 29 Sep 2009 13:02:58 +0000 (13:02 +0000)]
* gdb.base/watchpoints.exp: Respect gdb,no_hardware_watchpoints
target_info setting.

* gdb.threads/thread-specific.exp (get_thread_list): Support targets
that detect new threads during "info threads".

15 years ago * s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
Ulrich Weigand [Tue, 29 Sep 2009 12:51:34 +0000 (12:51 +0000)]
* s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
instead of CORE_ADDR for "amode".

15 years ago2009-09-29 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
M R Swami Reddy [Tue, 29 Sep 2009 11:55:09 +0000 (11:55 +0000)]
2009-09-29 M R Swami Reddy <MR.Swami.Reddy@nsc.com>

       * elf32-cr16.c (elf32_cr16_relocate_section): Removed info->relocatable
       to fix the ld/testsuites/ld-elf/linkonce1 test case.

15 years ago * ldlang.c (lang_size_sections_1): Allow scripts to specify a
Alan Modra [Tue, 29 Sep 2009 02:24:56 +0000 (02:24 +0000)]
* ldlang.c (lang_size_sections_1): Allow scripts to specify a
non-zero vma even when relocatable.

15 years ago * ia64-tdep.c: Update the comments on how we insert/remove
Joel Brobecker [Tue, 29 Sep 2009 01:25:37 +0000 (01:25 +0000)]
    * ia64-tdep.c: Update the comments on how we insert/remove
        breakpoints for L-X instructions.
        (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
        Update the comments inside these functions.

15 years ago * gdbarch.sh (displaced_step_hw_singlestep): New callback.
Ulrich Weigand [Tue, 29 Sep 2009 00:53:04 +0000 (00:53 +0000)]
* gdbarch.sh (displaced_step_hw_singlestep): New callback.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (default_displaced_step_hw_singlestep): New function.
* arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.

* ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
(rs6000_gdbarch_init): Install it.

* infrun.c (displaced_step_fixup): Use new callback to determine
whether to "step" or "continue" displaced copy.
(resume): Likewise.  Do not call maybe_software_singlestep
for displaced stepping.
(maybe_software_singlestep): Do not handle displaced stepping.

15 years ago * eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
Ulrich Weigand [Tue, 29 Sep 2009 00:48:32 +0000 (00:48 +0000)]
* eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
platforms that use function descriptors.  Prefer to use function
pointer types instead of function types.
* linespec.c (decode_objc): Support function descriptors.  Fully
initialize SAL result.
* objc-lang.c (find_methods): Support function descriptors.
Do not require function symbol to point to text section.

* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
via a function pointer, use the descriptor it points to.

15 years agodaily update
Alan Modra [Tue, 29 Sep 2009 00:00:05 +0000 (00:00 +0000)]
daily update

15 years ago*** empty log message ***
gdbadmin [Tue, 29 Sep 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

15 years ago Fix ia64 breakpoints in the L-X slot.
Joel Brobecker [Mon, 28 Sep 2009 23:54:01 +0000 (23:54 +0000)]
    Fix ia64 breakpoints in the L-X slot.
        * ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
        New variable shadow_slotnum, use it appropriately instead of slotnum.
        Move shadow_len initialization before SLOTNUM adjustment, cover now the
        whole remaining bundle.  Error now on breakpoints requested for the
        slot 2 of L-X bundles.  Better sanity check the requested slot 1 of L-X
        bundles.
        (ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
        appropriately instead of slotnum.  Warn now on breakpoints requested
        for the slot 2 of L-X bundles.  Better sanity check the requested slot
        1 of L-X bundles.  Update the assertio check of PLACED_SIZE.
        (ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
        appropriately instead of slotnum.  Move *lenptr initialization before
        SLOTNUM adjustment, cover now the whole remaining bundle.  Error now
        on breakpoints requested for the slot 2 of L-X bundles.  Better sanity
        check the requested slot 1 of L-X bundles.  Simplify the returned
        expression.

15 years ago * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
Joel Brobecker [Mon, 28 Sep 2009 23:47:02 +0000 (23:47 +0000)]
    * ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
        and the type of instruction before deciding which slot to save
        in the breakpoint shadown contents.

15 years ago (TRAP_REMOVE_SYSCALL_FLAG): New macro.
Doug Evans [Mon, 28 Sep 2009 21:09:15 +0000 (21:09 +0000)]
(TRAP_REMOVE_SYSCALL_FLAG): New macro.
(linux_nat_wait_1): Mask off is-syscall bit in wait status for
TRAP_IS_SYSCALL before passing value to caller.

15 years ago * linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
Doug Evans [Mon, 28 Sep 2009 18:39:29 +0000 (18:39 +0000)]
* linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.

15 years ago * configure.in: Don't invoke configure.tgt on $enable_targets.
Alan Modra [Mon, 28 Sep 2009 12:48:16 +0000 (12:48 +0000)]
* configure.in: Don't invoke configure.tgt on $enable_targets.
* configure: Regenerate.

15 years agooops - omitted from previous delta
Nick Clifton [Mon, 28 Sep 2009 12:15:51 +0000 (12:15 +0000)]
oops - omitted from previous delta

15 years ago PR 10478
Nick Clifton [Mon, 28 Sep 2009 09:45:33 +0000 (09:45 +0000)]
    PR 10478
        * elf.c (bfd_section_from_shdr): Allow SHN_BEFORE and SHN_AFTER
        section link values in x86 binaries.
        * elfcode.h (elf_object_p): Likewise.
        * readelf.c (get_elf_section_flags): Allow SHN_BEFORE and
        SHN_AFTER section link values in x86 binaries.
        (process_section_headers): Likewise.

15 years ago * elf32-m68k.c (elf_m68k_final_write_processing): New function.
Nick Clifton [Mon, 28 Sep 2009 09:34:20 +0000 (09:34 +0000)]
    * elf32-m68k.c (elf_m68k_final_write_processing): New function.
       (elf_backend_final_write_processing): Macro defined as above function.

15 years ago * valops.c (value_assign): Respect parent offset when
Ulrich Weigand [Mon, 28 Sep 2009 09:16:15 +0000 (09:16 +0000)]
* valops.c (value_assign): Respect parent offset when
assigning to a bitfield.

15 years agomissed entry
Alan Modra [Mon, 28 Sep 2009 07:14:37 +0000 (07:14 +0000)]
missed entry

15 years ago2009-09-28 Hui Zhu <teawater@gmail.com>
Hui Zhu [Mon, 28 Sep 2009 07:11:36 +0000 (07:11 +0000)]
2009-09-28  Hui Zhu  <teawater@gmail.com>

* i386-tdep.c (i386_process_record): Remove "0x" that
don't need.

15 years ago * scripttempl/elf32cr16.sc: Emit empty script for ld -r and ld -Ur.
Alan Modra [Mon, 28 Sep 2009 07:08:50 +0000 (07:08 +0000)]
* scripttempl/elf32cr16.sc: Emit empty script for ld -r and ld -Ur.
* scripttempl/elf32cr16c.sc: Likewise.
* scripttempl/elf32crx.sc: Likewise.
* scripttempl/tic54xcoff.sc: Likewise.
* scripttempl/aix.sc: Delete ${RELOCATING-0}.
* scripttempl/avr.sc: Likewise.
* scripttempl/elf32msp430.sc: Likewise.
* scripttempl/elf32msp430_3.sc: Likewise.
* scripttempl/elf32sh-symbian.sc: Likewise.
* scripttempl/elf_chaos.sc: Likewise.
* scripttempl/elfi370.sc: Likewise.
* scripttempl/nw.sc: Likewise.
* scripttempl/psos.sc: Likewise.
* scripttempl/armbpabi.sc: Delete ${RELOCATING-0} and ${CONSTRUCTING-0}.
* scripttempl/elf.sc: Likewise.
* scripttempl/elf64hppa.sc: Likewise.
* scripttempl/elfd10v.sc: Likewise.
* scripttempl/elfd30v.sc: Likewise.
* scripttempl/elfm68hc11.sc: Likewise.
* scripttempl/elfm68hc12.sc: Likewise.
* scripttempl/elfmicroblaze.sc: Likewise.
* scripttempl/elfxtensa.sc: Likewise.
* scripttempl/iq2000.sc: Likewise.
* scripttempl/mep.sc: Likewise.
* scripttempl/xstormy16.sc: Likewise.

15 years ago*** empty log message ***
gdbadmin [Mon, 28 Sep 2009 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***

15 years agodaily update
Alan Modra [Mon, 28 Sep 2009 00:00:17 +0000 (00:00 +0000)]
daily update

15 years ago * s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
Ulrich Weigand [Sun, 27 Sep 2009 20:47:42 +0000 (20:47 +0000)]
* s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
(is_rsi, is_rie): New insn format decoder routines.
(s390_displaced_step_fixup): New function.
(s390_gdbarch_init): Install displaced stepping routines.

15 years ago * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
Ulrich Weigand [Sun, 27 Sep 2009 20:46:35 +0000 (20:46 +0000)]
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
Add linux-tdep.o to gdb_target_obs.
(s390*-*-*): Likewise.

15 years ago * spu-low.c (spu_kill): Wait for inferior to terminate.
Ulrich Weigand [Sun, 27 Sep 2009 20:45:20 +0000 (20:45 +0000)]
* spu-low.c (spu_kill): Wait for inferior to terminate.
Call clear_inferiors.
(spu_detach): Call clear_inferiors.

15 years ago * gdb.threads/manythreads.c (main): Increase thread stack size
Ulrich Weigand [Sun, 27 Sep 2009 20:44:25 +0000 (20:44 +0000)]
* gdb.threads/manythreads.c (main): Increase thread stack size
to 2*PTHREAD_STACK_MIN.
* gdb.threads/multi-create.c (main): Likewise.
(create_function): Likewise.

15 years ago * gdb.base/dump.exp: Pass difference of pointer types instead
Ulrich Weigand [Sun, 27 Sep 2009 20:42:40 +0000 (20:42 +0000)]
* gdb.base/dump.exp: Pass difference of pointer types instead
of integer types as offset to restore in intarr3.srec case.

15 years ago * gdb.cp/gdb2495.exp: Skip test on spu*-*-*.
Ulrich Weigand [Sun, 27 Sep 2009 20:41:53 +0000 (20:41 +0000)]
* gdb.cp/gdb2495.exp: Skip test on spu*-*-*.

15 years ago * gdb.base/pie-support.exp: Pass "quiet" flag to gdb_compile.
Ulrich Weigand [Sun, 27 Sep 2009 20:40:23 +0000 (20:40 +0000)]
* gdb.base/pie-support.exp: Pass "quiet" flag to gdb_compile.

15 years ago* ldlang.c (lang_size_sections_1): Always force output vma to zero for
Christopher Faylor [Sun, 27 Sep 2009 16:08:34 +0000 (16:08 +0000)]
* ldlang.c (lang_size_sections_1): Always force output vma to zero for
relocatable sections.
(lang_size_sections_1): Revert previous COFF-only accommodation for relocatable
sections.

15 years ago * score-tdep.c: Comment out some simulator dependent codes.
Don Lee [Sun, 27 Sep 2009 08:45:12 +0000 (08:45 +0000)]
* score-tdep.c: Comment out some simulator dependent codes.
* score-tdep.h: Delete some simulator dependent macro definitions.

15 years ago * testsuite/initpri1.c: Don't try to use constructor priorities if
Ian Lance Taylor [Sun, 27 Sep 2009 05:20:03 +0000 (05:20 +0000)]
* testsuite/initpri1.c: Don't try to use constructor priorities if
compiling with gcc before 4.3.

15 years ago2009-09-27 Hui Zhu <teawater@gmail.com>
Hui Zhu [Sun, 27 Sep 2009 02:49:34 +0000 (02:49 +0000)]
2009-09-27  Hui Zhu  <teawater@gmail.com>

* record.c (record_open): Change "query" to "error".
(cmd_record_stop): Change "query" to "printf_unfiltered".

15 years agodaily update
Alan Modra [Sun, 27 Sep 2009 00:00:04 +0000 (00:00 +0000)]
daily update

15 years ago*** empty log message ***
gdbadmin [Sun, 27 Sep 2009 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***

15 years ago * gdb.texinfo (Cygwin Native): Mention support for Ctrl-BREAK.
Eli Zaretskii [Sat, 26 Sep 2009 16:47:13 +0000 (16:47 +0000)]
* gdb.texinfo (Cygwin Native): Mention support for Ctrl-BREAK.

15 years ago gdb ChangeLog entry:
Pierre Muller [Sat, 26 Sep 2009 12:08:31 +0000 (12:08 +0000)]
gdb ChangeLog entry:
* i386-nat.c (i386_stopped_data_address): Also check that
hitted watch register is not vacant.

gdb/testsuite ChangeLog entry:
New test for two watchpoints, with disabling of
the first inserted.
* testsuite/gdb.base/watchpoints.c: New file.
* testsuite/gdb.base/watchpoints.exp: New file.

15 years agomerge from gcc
DJ Delorie [Sat, 26 Sep 2009 00:01:16 +0000 (00:01 +0000)]
merge from gcc

15 years ago*** empty log message ***
gdbadmin [Sat, 26 Sep 2009 00:00:05 +0000 (00:00 +0000)]
*** empty log message ***

15 years agodaily update
Alan Modra [Sat, 26 Sep 2009 00:00:04 +0000 (00:00 +0000)]
daily update

15 years agogdb
Tom Tromey [Fri, 25 Sep 2009 21:39:53 +0000 (21:39 +0000)]
gdb
PR python/10664:
* language.h (struct language_defn) <la_get_string>: Add
'char_type' argument.
(LA_GET_STRING): Likewise.
(default_get_string, c_get_string): Update.
* language.c (default_get_string): Add 'char_type' argument.
* c-valprint.c (c_textual_element_type): Rename from
textual_element_type.  No longer static.  Update callers.
* c-lang.h (c_textual_element_type): Declare.
* c-lang.c (c_get_string): Add 'char_type' argument.
gdb/testsuite
PR python/10664:
* gdb.base/charset.exp: Test utf-16 strings with Python.

15 years agogdb
Tom Tromey [Fri, 25 Sep 2009 20:53:14 +0000 (20:53 +0000)]
gdb
* charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
UCS-4.
(iconv): Rename 'ucs_flag'.
(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
* c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
UCS-2 and UCS-4.
(convert_ucn): Use UTF-32.
gdb/testsuite
* gdb.base/charset.exp: Use UTF-16 and UTF-32, not UCS-2 and
UCS-4.
* gdb.base/charset.c (utf_32_string): Rename.
(init_utf32): Rename.
(main): Update.

15 years ago2009-09-25 Michael Eager <eager@eagercon.com>
Michael Eager [Fri, 25 Sep 2009 19:59:51 +0000 (19:59 +0000)]
2009-09-25  Michael Eager  <eager@eagercon.com>

* microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
microblaze_decode_insn): Add declarations.
(get_delay_slots_microblaze): Remove.

15 years ago * configure.ac: Pass any --cache-file=/dev/null option on to
Nick Clifton [Fri, 25 Sep 2009 19:25:04 +0000 (19:25 +0000)]
    * configure.ac: Pass any --cache-file=/dev/null option on to
        subconfigures.
        * configure: Regenerate.

15 years ago Update soruces to make alpha, arc and arm targets compile cleanly
Nick Clifton [Fri, 25 Sep 2009 19:13:27 +0000 (19:13 +0000)]
    Update soruces to make alpha, arc and arm targets compile cleanly
        with -Wc++-compat:
        * config/tc-alpha.c: Add casts.
        (extended_bfd_reloc_code_real_type): New type. Used to avoid
        enumeration conversion warnings.
        (struct alpha_fixup, void assemble_insn, assemble_insn)
        (assemble_tokens): Use new type.
        * ecoff.c: Add casts. (mark_stabs): Use enumeration names.
        * config/obj-elf.c: Add cast
        * config/tc-arc.c: Add casts.
        * config/obj-aout.h (text_section,data_section,bss_section):
        Make extern.
        * config/obj-elf.c: Add cast.
        * config/tc-arm.c: Add casts.
        (X, TxCE, TxCE, TxC3, TxC3w, TxCM_, TxCM, TUE, TUF, CE, CL, cCE)
        (cCL, C3E, xCM_, nUF, nCE_tag): Change input format to avoid the
        need for keywords as arguments.
        * ecoff.c: Add casts.
        * ecofflink.c: Add casts.
        * elf64-alpha.c: Add casts.
        (struct alpha_elf_got_entry, struct alpha_elf_reloc_entry): Move
        to top level.
        (SKIP_HOWTO): Use enum name.
        * elf32-arm.c: Add casts.
        (elf32_arm_vxworks_bed): Update code to avoid multiple
        declarations.
        (struct map_stub): Move to top level.
        * arc-dis.c Fix casts.
        * arc-ext.c: Add casts.
        * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
        enum.
        * emultempl/armelf.em: Add casts.

15 years agomerge from gcc
DJ Delorie [Fri, 25 Sep 2009 19:02:00 +0000 (19:02 +0000)]
merge from gcc