iftop: needs threads support

Fixes http://autobuild.buildroot.org/results/f2cb6113c360b8dbf63bafe5ae425921babdf636

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdl: use default autotools target-install

Fixes http://autobuild.buildroot.org/results/c950d7920d384cb0d37403cbe8344691d4231a1a

The normal 'make install' is perfectly fine, and it also works for static
builds.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libvncserver: gnutls support needs gcrypt as well

Fixes http://autobuild.buildroot.org/results/3b479b8cf751cc0c075ab942b56aad36f79ada71

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libsndfile: Add dependency on BR2_LARGEFILE

libsndfile requires sizeof(sf_count_t) == 8, where sf_count_t is a
typedef alias for off_t. This is not true by default for all
tool-chains, which leads to a runtime assert failure in binaries
compiled against libsndfile. See:

  http://permalink.gmane.org/gmane.comp.audio.libsndfile.devel/229

Add a dependency on BR2_LARGEFILE for libsndfile, and a comment if
BR2_LARGEFILE is not selected.

[Thomas: rebased patch, added more propagation of the new
BR2_LARGEFILE dependency to gst-plugins-good and mpd.]

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dhcp: bump to version 4.1-ESV-R8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

squid: bump to version 3.2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Make savedefconfig save to a configured file.

Store BR2_DEFCONFIG in .config, and use it to update the original input
defconfig file after updating the configuration.  When a config is
created by using the BR2_DEFCONFIG=... option, this is saved in the
.config file; later runs of savedefconfig will update that same location.
It is also possible to configure this place in the interactive
configuration.

The BR2_DEFCONFIG value itself is not saved into the generated
defconfig, since Kconfig considers it at its default. This is
intentional, to avoid hard-coding an absolute path in the defconfig.
It will anyway be set again when the defconfig is used with the
'make BR2_DEFCONFIG=... defconfig' command.

As a side-effect of this change, the *config options have been moved out
of the BR2_HAVE_DOT_CONFIG condition.  This doesn't make any functional
difference, because the .config is still not read for the *config targets.
However, the defconfig and savedefconfig targets do need to include
.config now, which makes them slightly slower.

[Peter: slightly tweak help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: busybox-update-config should depend on busybox-configure

Before the config file can be copied, it has to exist.  The
other xxx-update-config targets do this as well.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

target/generic: add filesystem overlay option

The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.

[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

manual: add section about storing the configuration.

Reuse part of board-support.txt, and remove that one because it
was unused.

[Peter: minor tweaks to text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Legacy: order the options reverse-chronologically.

This makes sure that the most interesting ones are at the top.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Legacy: make the menu a normal menu.

The help text is moved to comments.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: ARMv8 64bit arch is called AArch64

Thanks to Thomas for noticing.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openssl: security bump to version 1.0.1d

Fixes CVE-2013-0169, CVE-2012-2686 and CVE-2013-0166.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libffi: switch to using a Git version, brings Microblaze and Xtensa support

We already had backported patches for the Blackfin and AArch64
support, and now we would have needed to also backport the Xtensa
support and the Microblaze support. This starts to get crazy.

Let's switch to using a Git version from Github, until libffi finally
releases a new stable version.

In order to achieve this, we also need to:

 * autoreconf the package, so that a libffi.pc file gets generated

 * manually install the libffi.pc file, because it doesn't get
   installed by libffi Makefile, for some reason

 * remove the part of the target post install hook that was messing
   with libffi.pc, since it was modifying the one in STAGING_DIR
   (which is odd for a target post install hook), and the libffi.pc
   file is anyway not installed to the target anymore.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

util-linux: add support for Xtensa

[Thomas Petazzoni: rename patch to not have the package version in the
patch file name, adjust the commit title.]

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

util-linux: add numbers to patches

As we are going to add an Xtensa related patch that needs to be
applied *after* the AArch64 patch, let's first add a number to each
util-linux patch file name, so that we know they will be applied in
the right order.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Make external toolchain relocatable

The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.

This only works for a downloaded external toolchain.  For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory).  For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.

See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gnutls: tools require the package

[Peter: remove the unneeded BR2_USE_WCHAR dependency]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: add mdev patch for 1.21.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

samba: security bump to version 3.6.12

Fixes CVE-2013-0213

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: fix Aarch64 typo

Thanks to WIll Newton to noticing.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Revert "gnutls: make it non-wchar friendly"

This reverts commit f1b86cef9884894df26ed25efaabe254f8f0754b

While the fix makes gnutls build without wchar, it doesn't actually work as
there's no rpl_wctomb implementation so the .so ends up with an undefined
reference to wctomb:

./host/usr/bin/arm-linux-nm -D staging/usr/lib/libgnutls.so.28|grep wctomb
         U wctomb

Causing linker errors for packages trying to use it:

  CCLD   msmtp
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgnutls.so:
undefined reference to `wctomb'
collect2: ld returned 1 exit status

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gnutls: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libupnp: security bump to version 1.6.18

Fixes CVE-2012-5958, CVE-2012-5959, CVE-2012-5960, CVE-2012-5961,
CVE-2012-5962, CVE-2012-5963, CVE-2012-5964 and CVE-2012-5965.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Revert "gawk: bump to version 4.0.2"

This reverts commit 6b307de4f9d6ae806b7cbbf8bc1d412d139d75cf (version part).

Fixes http://autobuild.buildroot.org/results/46828cef48bc1267583ba8174c0e8ee993fac865

As discussed on the list, let's revert this for the 2013.02 release
and then bring it up wiith gawk upstream / try to fix for 2013.05+

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lvm2: uses fork()

Fixes http://autobuild.buildroot.org/results/cbc74e2fb5eaefac1fe17ada1dc46a5c906cc1c9

Also propagate BR2_USE_MMU to lvm2's reverse dependencies.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liboping: fix legal-info

Fixes http://autobuild.buildroot.org/results/c0bfc03389382235782474b278ca4afd1d283d60

The included (LGPL) license file is called COPYING.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/qemu: bump version to 1.3.1

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/usbredir: update to version 0.6

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdb: fixing gdb 7.4.1 build with eglibc-2_16

gdb 7.4.1 fails with the following error
  gdb-7.4.1/gdb/linux-nat.h:79:18: error: field 'siginfo' has incomplete type
because gdb use 'struct siginfo' instead of 'struct siginfo_t'.
Crosstool-NG allready use the patches to prevent this error so use this
patches for buildroot too.

see also http://permalink.gmane.org/gmane.comp.gcc.cross-compiling/15305

Fixes http://autobuild.buildroot.net/results/b894a5cecd9c5e0a1a751ebbff90a14aea1803da/build-end.log

Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liboping: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libpcap: fixup pcap-config

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pkg-infra: add <pkg>_CONFIG_FIXUP to fix *-config files

This patch will add <pkg>_CONFIG_FIXUP variable to buildroot infra.

It's purpose is to inform buildroot that the package in question
contains some $(STAGING_DIR)/usr/bin/*-config files and that we
want to automatically fix prefixes of such files.

It is often the case that many packages call these
files during their configuration step to determine 3rd party
library package locations and any flags needed to link against them.

For example:
Some package might try to check the existense and linking flags
of NSPR package by calling $(STAGING_DIR)/usr/bin/nspr-config --prefix.
Without this fix. NSPR would return /usr/ as it's prefix which is
wrong when cross-compiling.
Correct would be $(STAGING_DIR)/usr.

All packages that have <pkg>_INSTALL_STAGING = YES defined and
also install some config file(s) into $(STAGING_DIR)/usr/bin must
hereafter also define <pkg>_CONFIG_FIXUP with the correspondig
filename(s).

For example:

DIVINE_CONFIG_FIXUP = divine-config

or for multiple files:

IMAGEMAGICK_CONFIG_FIXUP = Magick-config Wand-config

Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdb: build gdbserver with TARGET_MAKE_ENV

This commit fixes the exact same problem than
21a0c11a90f9ff19c78a5f32e0a2e9064fd28054, but for the gdbserver
build. The problem is that when you use the Crosstool-NG toolchain
backend, gawk gets built as a dependency of Crosstool-NG. So the gdb
configure scripts detects it, and assumes it is in the PATH (because
the gdb configure step gets run with TARGET_MAKE_ENV).

But then, the build fails, because it tries to run gawk, but gawk
isn't in the PATH, because we forget to use this TARGET_MAKE_ENV
variable when building gdbserver.

Fixes http://autobuild.buildroot.org/results/d0173de533b5e2fffed2eff7327a502ed2d787cd/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tvheadend: disable on avr32

tvheadend requires an atomic_add operation. Either you have a gcc >=
4.3 toolchain and it uses the gcc intrinsics, or it has special code
for x86, x86-64, PPC and ARM. So in the context of Buildroot, the only
really problematic architecture is avr32, which uses gcc 4.2.

Fixes http://autobuild.buildroot.org/results/f015b1888d739c383aca61609059aa7675a4da7d/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tvheadend: get rid of trailing spaces/tabs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

polarssl: security bump to version 1.2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uboot-tools: also bump to 2013.01.01

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iw: switch upstream site

It's moved from wireless.kernel.org to generic kernel.org

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: bump 3.7.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 7}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

neard: fix missing nfc.h header

We have a patch that allows neard to build even on toolchain using old
kernel headers that lack the nfc.h header. However, after the bump to
neard 0.9, this patch was not updated to take into account the two new
plugins that neard has added.

Fixes http://autobuild.buildroot.org/results/5eeb6f62cc0e654a536b6614dc51e8af4e301bb6/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libfuse: add patch to fix AArch64 build issue

Fixes http://autobuild.buildroot.org/results/1fb89ab412935ab02494b269a367b283cf9618c1/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pptp-linux: fix parallel build

Add a patch to fix a parallel build issue caused by a header file
being generated too late.

Fixes:

http://autobuild.buildroot.org/results/2324974d4818b2657a7df4beee33fc4713d6116f/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pptp-linux: rename patches to remove the version number

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

heirloom-mailx: needs fork()

heirloom-mailx uses fork(), so we can't use it as is on !mmu
platforms.

Fixes:

http://autobuild.buildroot.org/results/c5a8e3a4cbc1e1de985fe3c724b711027865abe7/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

u-boot: bump 2013.01.x version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udisks: new package

[Peter: fix dependencies, comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lvm2: add option for application library

[Peter: make mutual exclusive with dmsetup-only, drop special install / make]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lvm2: Install devmapper.pc to staging/target pkgconfig directory.

Without this change if some package which have dependency on device mapper
and use pkgconfig to check version always fail to find library because
devmapper.pc file wasn't installed.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: remove support for AArch64 Linaro 2012.10 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: add support for AArch64 Linaro 2013.01 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nuttcp: needs mmu

Fixes:
http://autobuild.buildroot.net/results/b8c019a5701377a1e134d01ac0bae5fe34dc975f/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

avr32: support uClibc 0.9.33.2

Add a uClibc patch from OpenWRT, and tweak an existing patch to cope with
the lack of a dup3 Linux syscall on avr32. This allow uClibc 0.9.33.2 to be
built for avr32.

[Peter: add upstream url for openwrt patch]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: add linaro 2013.01, remove 2012.10

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

arch/Config.in.arm: Use armv6k for arm1136jf-s rev1

According to the ARM1136JF-S and ARM1136J-S Revision r1p5 Technical Reference
Manual, from release rev1 (r1pn), the ARM1136JF-S processor implements the ARMv6
instruction set with the ARMv6k additions.

This patch differentiates the ARM1136JF-S revisions 0 and 1 in order to use
either ARMv6j (e.g. on Freescale i.MX31) or ARMv6k (e.g. on Freescale i.MX35).

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

blackfin: add 2012r2 and remove 2010rc1 toolchains

Remove the old 2010RC1 toolchain and add the new 2012R2-RC2 toolchain.
On related good news the new toolchain fixes:
http://autobuild.buildroot.net/results/eac5bd4f4766d98431e72a3c81492a962c85fa98/
since it's got unshare() support now.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cjson: change source to svn repo

The original cJSON submittal downloaded a .zip file from SourceForge.
The .zip file did not have a version number, making it impossible
to gaurantee that the same archive is downloaded on any given build.
It also required a custom EXTRACT command.

This patch changes the source for cJSON to the svn repository
listed on the sf project web page - giving us an actual version
number, and letting us use buildroot's normal extraction functionality.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

neard: bump version to 0.9

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pcsc-lite: requires mmu

Fixes:
http://autobuild.buildroot.net/results/14400ae2c9e312729efa9a9026b5fdd487868c8a/

Also add license information while at it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ebtables: needs MMU

Fixes:
http://autobuild.buildroot.net/results/201f8d3d58cdff0c3501a673003558103237fb22/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xtensa: sqlite requires special compiler option

Some of the generated object files are too large for PC-relative addressing,
so use the -mtext-section-literals compiler flag to move symbols closer to
the code.

[Peter: fix commit message]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/linux-firmware: update to newer version

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

wipe: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kismet: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libungif: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tn5250: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libmpd: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gmpc: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

distcc: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dialog: add license information

[Peter: License is LGPLv2.1]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bluez_utils: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

olsr: bump to version 0.6.4

Bump olsrd to version 0.6.4

Fixes:
http://autobuild.buildroot.net/results/553c8157cd83ca60475caacc119779c778806781/
which is due to the old version not being friendly with newer flex
versions.

Enabled more plugins to make it more useful.

Switch to forked mode in the init script to avoid console noise.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New package: cache-calibrator

The Calibrator is a small C program that is supposed to analyze
a computers (cache-) memory system and extract the following
parameters:

    number of cache levels
    for each cache level:
        its size
        its linesize
        its access/miss latency
    main memory access latency
    number of TLB levels
    for each TLB level:
        its capacity (i.e. number of entries)
        the pagesize used
        the TLB miss latency

http://homepages.cwi.nl/~manegold/Calibrator/

It is also recommended as a load generator for realtime testing in:

https://rt.wiki.kernel.org/index.php/RT_PREEMPT_HOWTO#Benchmarking

[Peter: reformat help text, fix extract step]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

genext2fs: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

quagga: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

readline: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sdparm: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tar: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dhcp: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bind: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dosfstools: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mpd: bump to version 0.17.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nettle: bump to version 2.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

samba: bump to version 3.6.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: Allow to build an environment image

[Peter: Tweaked help text]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python3: Fix pyc-only related runtime exceptions

Python3 changes the pyc lookup strategy, ignoring the
__pycache__ directory if the .py file is missing. Change
install location to enable use of .pyc without their parent .py

See http://www.python.org/dev/peps/pep-3147

[Peter: add patch header]
Signed-off-by: Daniel Nelson <daniel@sigpwr.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
  (untested)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add support for the Calao-systems USB-A9260

Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

collectd: bump to version 5.1.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux-firmware: add new config option of iwlwifi 5000 firmware

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qwt: fix project's URL

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: bump 3.7.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 7}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libvncserver: bump version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

olsr: rework build and install procedure

This commit reworks the build and install steps of the olsr package,
to fix a number of problems and do minor improvements:

 1. The build step was doing "make <foo>" for each
    plugin. Unfortunately, inside olsr build system, doing "make
    <foo>" for a plugin triggers a clean of the plugin directory, a
    build, and then an installation of the plugin. This installation
    fails because DESTDIR is not passed at the install step. This
    leads to build issues like
    http://autobuild.buildroot.org/results/a9fed78cd0b3991763a797c38387edd4157fbdb9/build-end.log. To
    fix this, we call make in each plugin's directory, which is what
    "make <foo>" was doing internally.

 2. The install step was manually installing the olsrd binary. We now
    instead use the install_bin make target that comes in olsr's build
    system.

 3. The install step was manually installing the olsr plugins. We now
    instead use the install make target available in each plugin's
    makefile.

 4. We use 'install' to install the init script, which avoids the
    manual creation of /etc/init.d.

 5. We use 'install' to install the sample configuration file.

 6. We remove the useless strip commands.

 7. We add a patch that allows us to pass LDCONFIG=/bin/true to avoid
    ldconfig being called during the installation process.

 8. We remove commands from the clean step that were in fact
    uninstallation commands. We don't bother re-adding those commands
    in an uninstallation step, since it is now generally accepted that
    the uninstall step is quite useless and should be deprecated.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

olsr: reindent commands with tabs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

polkit: don't build documentation and examples

Building the manpages of polkit fails with issues in xsltproc. Since
we are generally not that much interested in documentation, we disable
them. This solves the build issues like
http://autobuild.buildroot.org/results/751b71a594fa04924c7c3bb8f2c460ce1e44aa90/build-end.log.

While we're at it, we also disable the build of the polkit example
programs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sudo: bump to version 1.8.6p4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>