*** empty log message ***

* go32-nat.c: Include "gdbthread.h".
(go32_stop, go32_kill_inferior): Delete the main thread.
(go32_create_inferior): Add it.
(go32_thread_alive, go32_pid_to_str): New.
(init_go32_ops): Register go32_thread_alive and go32_pid_to_str.

* go32-nat.c (fetch_register, store_register): Pass the regcache
gdbarch to i386_fp_regnum_p and i386_fpc_regnum_p.
(go32_xfer_memory): Change type of myaddr parameter to gdb_byte.
(struct seg_descr, struct seg_descr): pack the whole struct
instead of each member individually.

(_initialize_python): Use unabbreviated commands
in prefix name.

* Makefile.in (stamp-h): Also create .deps.

* Makefile.in (generated_files): Add GNULIB_H.

* solib-pa64.c (pa64_solib_create_inferior_hook): Don't set
DT_HP_DEBUG_PRIVATE.  Add warning if DT_HP_DEBUG_PRIVATE is not set.
Revise comment.
(pa64_current_sos): Remove map private warning warning.
* solib-som.c: Include string.h and sys/utsname.h.
(get_hpux_major_release): New function.
(som_solib_create_inferior_hook): Read dynamic linker header.  Warn
about shared library private mapping on HP-UX 11 and later.  Only force
private mapping of shared libraries on HP-UX 10 and earlier.
(link_map_start): Delete warning.

2008-08-09  Xuepeng Guo  <xuepeng.guo@intel.com>
    H.J. Lu  <hongjiu.lu@intel.com>
    Mark Kettenis <kettenis@gnu.org>

* amd64-tdep.c (amd64_frame_cache): Add saved_sp_reg.
(amd64_init_frame_cache): Initialize saved_sp_reg.
(amd64_analyze_stack_align): New.
(amd64_analyze_prologue): Call it.
(amd64_frame_cache): Use saved_sp_reg if it is invalid.  Don't set
%rip to 8 when halfway aligning the stack.

* amd64-tdep.h (amd64_regnum): Add AMD64_R9_REGNUM to
AMD64_R14_REGNUM.

* i386-tdep.c (i386_frame_cache): Remove stack_align.  Add
saved_sp_reg.
(i386_alloc_frame_cache): Remove stack_align.  Initialize
saved_sp_reg to -1.
(i386_analyze_stack_align): Rewrite.
(i386_frame_cache): Use saved_sp_reg if it is valid.

PR 6615
* rename.c (smart_rename): Punctuate error messages.

* target.c: Include "solib.h".
(target_pre_inferior): Call no_shared_libraries.
* infcmd.c (run_command_1): Do not call objfile_purge_solibs
or clear_solib.
(attach_command): Do not call clear_solib.

PR 6753
* ldmain.c (check_for_scripts_dir, set_scripts_dir): Delete.
(main): Don't set_scripts_dir here.
* ldfile.c (check_for_scripts_dir, find_scripts_dir): New functions,
largely based on ldmain.c versions.
(ldfile_find_command_file): Set up search in script dir here without
affecting library search.
* Makefile.am (ldmain.o): No need to define SCRIPTDIR.
(ldfile.o): New rule.
* Makefile.in: Regenerate.

* i386obsd-nat.c (i386obsd_supply_pcb): Supply the right bytes for
the %eip register.

Add AVR architectures avr25, avr31, avr35, and avr51 to match GCC.
bfd/
* archures.c (bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35,
bfd_mach_avr51): New.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): Add avr25, avr31, avr35, and avr51
architectures. Change comments to match architecture comments in GCC.
(compatible): Add test for new AVR architectures.
* elf32-avr.c (bfd_elf_avr_final_write_processing): Recognize
bfd_mach_avr25, bfd_mach_avr31, bfd_mach_avr35 and bfd_mach_avr51.
(elf32_avr_object_p): Recognize E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35 and E_AVR_MACH_AVR51.

gas/
* config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
architectures. Reorganize list to put mcu types in correct architectures
and to order list same as in GCC. Use new ISA definitions in
include/opcode/avr.h.
* doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
descriptions. Reorganize descriptions to put mcu types in correct
architectures and to order lists same as in GCC.

include/
* elf/avr.h (E_AVR_MACH_AVR25, E_AVR_MACH_AVR31,
E_AVR_MACH_AVR35, E_AVR_MACH_AVR51): Define.
(EF_AVR_MACH): Redefine to 0x7F.
* opcode/avr.h (AVR_ISA_TINY3, AVR_ISA_ALL, AVR_ISA_USB162): Remove.
(AVR_ISA_AVR3): Redefine.
(AVR_ISA_AVR1, AVR_ISA_AVR2, AVR_ISA_AVR31, AVR_ISA_AVR35,
AVR_ISA_AVR3_ALL, AVR_ISA_AVR4, AVR_ISA_AVR5, AVR_ISA_AVR51,
AVR_ISA_AVR6): Define.

ld/
* Makefile.am (ALL_EMULATIONS): Add eavr25.o, eavr31.o, eavr35.o,
and eavr51.o.
Add rules for eavr25.c, eavr31.c, eavr35.c, eavr51.c.
* Makefile.in: Regenerate.
* configure.tgt (avr-*-*, targ_extra_emuls): Add avr25, avr31, avr35
and avr51.
* emulparams/avr25.sh: New file.
* emulparams/avr31.sh: New file.
* emulparams/avr35.sh: New file.
* emulparams/avr51.sh: New file.

*** empty log message ***

daily update

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>
    Mark Shinwell  <shinwell@codesourcery.com>
    Maxim Kuvyrkov  <maxim@codesourcery.com>

* elf32-mips.c (mips_vxworks_copy_howto_rela): Replace with...
(elf_mips_copy_howto): ...this howto.  Clear the size fields.
(mips_vxworks_jump_slot_howto_rela): Replace with...
(elf_mips_jump_slot_howto): ...this howto.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_plt_readonly): Define.
(elf_backend_plt_sym_val): Define for non-VxWorks targets.
(mips_vxworks_bfd_reloc_type_lookup): Delete.
(mips_vxworks_bfd_reloc_name_lookup): Likewise.
(mips_vxworks_rtype_to_howto): Likewise.
(elf_backend_want_dynbss): Don't define for VxWorks.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(bfd_elf32_bfd_reloc_name_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_got_symbol_offset): Don't define.
* elfn32-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf32_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf32_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf32_n32_rtype_to_howto): Handle R_MIPS_COPY and
R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elf64-mips.c (elf_mips_copy_howto, elf_mips_jump_slot_howto): New.
(bfd_elf64_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_COPY
and BFD_RELOC_MIPS_JUMP_SLOT.
(bfd_elf64_bfd_reloc_name_lookup): Handle "R_MIPS_COPY" and
"R_MIPS_JUMP_SLOT".
(mips_elf64_rtype_to_howto): Handle R_MIPS_COPY and R_MIPS_JUMP_SLOT.
(elf_backend_rela_plts_and_copies_p, elf_backend_plt_readonly)
(elf_backend_plt_sym_val): Define.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Delete.
(_bfd_mips_elf_use_plts_and_copy_relocs, _bfd_mips_elf_init_stubs)
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): Declare.
* elfxx-mips.c (mips_elf_la25_stub): New structure.
(LA25_LUI, LA25_J, LA25_ADDIU): New macros.
(mips_elf_link_hash_entry): Add "la25_stubs", "has_static_relocs"
and "has_nonpic_branches" fields.  Remove "is_relocation_target" and
"is_branch_target".
(mips_elf_link_hash_table): Add blank lines.  Add
"use_plts_and_copy_relocs", "reserved_gotno", "strampoline",
"la25_stubs" and "add_stub_section" fields.
(mips_htab_traverse_info): New structure.
(PIC_OBJECT_P, MIPS_ELF_LOAD_WORD): New macros.
(MIPS_RESERVED_GOTNO): Delete.
(mips_o32_exec_plt0_entry, mips_n32_exec_plt0_entry)
(mips_n64_exec_plt0_entry, mips_exec_plt_entry): New tables.
(mips_elf_link_hash_newfunc): Update after the changes to
mips_elf_link_hash_entry.
(mips_elf_check_mips16_stubs): Replace the DATA parameter with
an INFO parameter.  Don't look through warnings symbols here;
do it in mips_elf_check_symbols instead.
(mips_elf_create_stub_symbol): New function.
(mips_elf_la25_stub_hash, mips_elf_la25_stub_eq): New functions.
(_bfd_mips_elf_init_stubs, mips_elf_local_pic_function_p): Likewise.
(mips_elf_add_la25_intro, mips_elf_add_la25_trampoline): Likewise.
(mips_elf_add_la25_stub, mips_elf_check_symbols): New functions.
(mips_elf_gotplt_index): Check for VxWorks.
(mips_elf_output_dynamic_relocation): Take the relocation index
as an extra parameter.  Do not increment reloc_count here.
(mips_elf_initialize_tls_slots): Update the calls to
mips_elf_output_dynamic_relocation accordingly.
(mips_elf_multi_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Don't allocate reserved GOT
entries here.  Unconditionally create .got.plt, but don't
set its alignment here.
(mips_elf_relocation_needs_la25_stub): New function.
(mips_elf_calculate_relocation): Redirect branches and jumps to
a non-PIC stub if one exists.  Check !h->has_static_relocs instead
of !htab->is_vxworks when deciding whether to create dynamic
relocations for R_MIPS_32, R_MIPS_REL32 and R_MIPS_64.
(_bfd_mips_elf_create_dynamic_sections): Unconditionally call
_bfd_elf_create_dynamic_sections.  Unconditionally set up
htab->splt and htab->sdynbss.  Set htab->srelplt to ".rel.plt"
if !htab->is_vxworks.  Add non-VxWorks values of
htab->plt_header_size and htab->plt_entry_size.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
non-branch static relocations.  Set has_nonpic_branches when an la25
stub might be required.  Set can_make_dynamic_p to TRUE if R_MIPS_32,
R_MIPS_REL32 and R_MIPS_64 relocations can be made dynamic,
rather than duplicating the condition.  Do not make them dynamic
for read-only sections in non-PIC executable objects.
Do not protect this code with dynobj == NULL || htab->sgot == NULL;
handle each group of cases separately.  Add a default case that
sets has_static_relocs for non-GOT relocations that cannot be
made dynamic.  Don't set is_relocation_target and is_branch_target.
Reject non-PIC static relocations in shared objects.
(_bfd_mips_vxworks_adjust_dynamic_symbol): Fold into...
(_bfd_mips_elf_adjust_dynamic_symbol): ...here, using
htab->use_plts_and_copy_relocs instead of htab->is_vxworks
to select PLT and copy-reloc handling.  Set the alignment of
.plt and .got.plt when allocating the first entry.  Generalize
code to handle REL as well as RELA sections and 64-bit as well as
32-bit GOT entries.  Complain if we find a static-only reloc
against an externally-defined symbol and if we cannot create
dynamic relocations for it.  Allocate copy relocs using
mips_elf_allocate_dynamic_relocations on non-VxWorks targets.
Set possibly_dynamic_relocs to 0 when using PLTs or copy relocs.
Skip reserved .got.plt entries.
(_bfd_mips_elf_always_size_sections): Use mips_elf_check_symbols
instead of mips_elf_check_mips16_stubs to process each symbol.
Do the traversal for relocatable objects too.
(mips_elf_lay_out_got): Use htab->reserved_gotno instead of
MIPS_RESERVED_GOTNO.
(_bfd_mips_elf_size_dynamic_sections): Exclude sdynbss if it
is empty.  Extend the DT_PLTREL, DT_JMPREL and DT_PLTRELSZ handling
to non-VxWorks targets.  Only add DT_REL{,A}, DT_REL{,A}SZ and
DT_REL{,A}ENT if .rel.dyn is nonempty.  Create a symbol for the
PLT.  Allocate a nop at the end of the PLT.  Allocate DT_MIPS_PLTGOT.
(mips_elf_create_la25_stub_info): New function.
(_bfd_mips_elf_finish_dynamic_symbol): Write out PLT entries
and copy relocs where necessary.  Check pointer_equality_needed.
(mips_finish_exec_plt): New function.
(_bfd_mips_elf_finish_dynamic_sections): Always set DT_PLTGOT
to the beginning of htab->sgot.  Use htab->reserved_gotno instead
of MIPS_RESERVED_GOTNO.  Assert htab->use_plts_and_copy_relocs
instead of htab->is_vxworks for DT_PLTREL, DT_PLTRELSZ and DT_JMPREL.
Set DT_PLTREL to DT_REL instead of DT_RELA on non-VxWorks targets.
Use mips_finish_exec_plt to create non-VxWorks PLT headers.  Set
DT_MIPS_PLTGOT.
(_bfd_mips_elf_copy_indirect_symbol): Copy has_static_relocs
from the indirect symbol to the direct symbol.  Also copy
has_nonpic_branches for indirect symbols.
(_bfd_mips_elf_get_target_dtag): Handle DT_MIPS_PLTGOT and
DT_MIPS_RWPLT.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): Set
use_plts_and_copy_relocs to TRUE.  Use TRUE rather than 1
when setting is_vxworks.
(_bfd_mips_elf_use_plts_and_copy_relocs): New function.
(_bfd_mips_elf_final_link): Call mips_elf_create_la25_stub for
each la25_stub.
(_bfd_mips_elf_merge_private_bfd_data): Treat dynamic objects
as PIC.  Generalize message about linking PIC and non-PIC.
(_bfd_mips_elf_plt_sym_val, _bfd_mips_post_process_headers): New
functions.
* reloc.c: Update comment near BFD_RELOC_MIPS_JUMP_SLOT.
* bfd-in2.h: Regenerated.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>
    Mark Shinwell  <shinwell@codesourcery.com>

* readelf.c (get_mips_symbol_other): Handle STO_MIPS_PLT and
STO_MIPS_PIC.
(slurp_rela_relocs, slurp_rel_relocs): Handle MIPS ELF64 here.
(dump_relocations, debug_apply_relocations): Don't handle it here.
(get_mips_dynamic_type): Handle DT_MIPS_PLTGOT and DT_MIPS_RWPLT.
(print_mips_pltgot_entry): New function.
(process_mips_specific): Dump the PLT GOT.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>

* config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
(OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
(OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
(OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
(md_longopts): Add -call_nonpic.
(md_parse_option): Handle OPTION_CALL_NONPIC.
(md_show_usage): Add -call_nonpic.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>

* gas/mips/call-nonpic-1.s, gas/mips/call-nonpic-1.d: New test.
* gas/mips/mips.exp: Run it.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>
    Mark Shinwell  <shinwell@codesourcery.com>

* mips.h (STO_MIPS_PLT, ELF_ST_IS_MIPS_PLT, ELF_ST_SET_MIPS_PLT)
(STO_MIPS_PIC, DT_MIPS_PLTGOT, DT_MIPS_RWPLT): New macros.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>

* emulparams/elf32bmip.sh (GOT): Define, moving .got.plt to...
(OTHER_RELRO_SECTIONS, OTHER_READWRITE_SECTIONS): ...one of these
two variables.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emultempl/mipself.em: Include ldctor.h, elf/mips.h and elfxx-mips.h.
(is_mips_elf): New macro.
(stub_file, stub_bfd): New variables.
(hook_stub_info): New structure.
(hook_in_stub): New function.
(mips_add_stub_section): Likewise.
(mips_create_output_section_statements): Likewise.
(mips_before_allocation): Likewise.
(real_func): New variable.
(mips_for_each_input_file_wrapper): New function.
(mips_lang_for_each_input_file): Likewise.
(lang_for_each_input_file): Define.
(LDEMUL_BEFORE_ALLOCATION): Likewise.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise.

2008-08-08  Richard Sandiford  <rdsandiford@googlemail.com>
    Daniel Jacobowitz  <dan@codesourcery.com>

* ld-mips-elf/mips16-pic-3a.s,
ld-mips-elf/mips16-pic-3b.s,
ld-mips-elf/mips16-pic-3.dd,
ld-mips-elf/mips16-pic-3.gd,
ld-mips-elf/mips16-pic-3.rd,
ld-mips-elf/mips16-pic-3.inc,
ld-mips-elf/pic-and-nonpic-1a.s,
ld-mips-elf/pic-and-nonpic-1b.s,
ld-mips-elf/pic-and-nonpic-1.ld,
ld-mips-elf/pic-and-nonpic-1.dd,
ld-mips-elf/pic-and-nonpic-1.nd,
ld-mips-elf/pic-and-nonpic-1-rel.dd,
ld-mips-elf/pic-and-nonpic-1-rel.nd,
ld-mips-elf/pic-and-nonpic-2a.s,
ld-mips-elf/pic-and-nonpic-2b.s,
ld-mips-elf/pic-and-nonpic-2.d,
ld-mips-elf/pic-and-nonpic-3a.s,
ld-mips-elf/pic-and-nonpic-3a.ld,
ld-mips-elf/pic-and-nonpic-3a.dd,
ld-mips-elf/pic-and-nonpic-3a.gd,
ld-mips-elf/pic-and-nonpic-3a.sd,
ld-mips-elf/pic-and-nonpic-3b.s,
ld-mips-elf/pic-and-nonpic-3b.ld,
ld-mips-elf/pic-and-nonpic-3b.ad,
ld-mips-elf/pic-and-nonpic-3b.dd,
ld-mips-elf/pic-and-nonpic-3b.gd,
ld-mips-elf/pic-and-nonpic-3b.nd,
ld-mips-elf/pic-and-nonpic-3b.pd,
ld-mips-elf/pic-and-nonpic-3b.rd,
ld-mips-elf/pic-and-nonpic-3b.sd,
ld-mips-elf/pic-and-nonpic-3-error.d,
ld-mips-elf/pic-and-nonpic-4a.s,
ld-mips-elf/pic-and-nonpic-4b.s,
ld-mips-elf/pic-and-nonpic-4b.ld,
ld-mips-elf/pic-and-nonpic-4b.ad,
ld-mips-elf/pic-and-nonpic-4b.dd,
ld-mips-elf/pic-and-nonpic-4b.gd,
ld-mips-elf/pic-and-nonpic-4b.nd,
ld-mips-elf/pic-and-nonpic-4b.rd,
ld-mips-elf/pic-and-nonpic-4b.sd,
ld-mips-elf/pic-and-nonpic-4-error.d,
ld-mips-elf/pic-and-nonpic-5a.s,
ld-mips-elf/pic-and-nonpic-5b.s,
ld-mips-elf/pic-and-nonpic-5b.ld,
ld-mips-elf/pic-and-nonpic-5b.ad,
ld-mips-elf/pic-and-nonpic-5b.dd,
ld-mips-elf/pic-and-nonpic-5b.gd,
ld-mips-elf/pic-and-nonpic-5b.nd,
ld-mips-elf/pic-and-nonpic-5b.rd,
ld-mips-elf/pic-and-nonpic-5b.sd,
ld-mips-elf/pic-and-nonpic-5b.pd,
ld-mips-elf/pic-and-nonpic-6.ld,
ld-mips-elf/pic-and-nonpic-6-o32a.s,
ld-mips-elf/pic-and-nonpic-6-o32b.s,
ld-mips-elf/pic-and-nonpic-6-o32c.s,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.pd,
ld-mips-elf/pic-and-nonpic-6-o32.rd,
ld-mips-elf/pic-and-nonpic-6-o32.sd,
ld-mips-elf/pic-and-nonpic-6-n32a.s,
ld-mips-elf/pic-and-nonpic-6-n32b.s,
ld-mips-elf/pic-and-nonpic-6-n32c.s,
ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.pd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n32.sd,
ld-mips-elf/pic-and-nonpic-6-n64a.s,
ld-mips-elf/pic-and-nonpic-6-n64b.s,
ld-mips-elf/pic-and-nonpic-6-n64c.s,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.pd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-n64.sd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.

2008-08-08  Sterling Augustine  <sterling@tensilica.com>
* config/tc-xtensa.c (exclude_section_from_property_tables): New.
(xtensa_create_property_segments): Use it.
(xtensa_create_xproperty_segments): Likewise.

* Makefile.in (python.o): Remove dependencies.  Use COMPILE and
POSTCOMPILE.
(python-utils.o): Likewise.

gdb.base/args.exp: Prevent ~/.gdbinit from affecting test.

(_initialize_core): Remove spurious paren from set
gnutarget doc string.

* ppc-linux-nat.c: Include "auxv.h" and "elf/common.h".
Define PPC_FEATURE_BOOKE.
(ppc_linux_get_hwcap): New function.
(ppc_linux_region_ok_for_hw_watchpoint): Handle PowerPC 440
4-bytes alignment restrictions.
(ppc_linux_insert_watchpoint): Handle PowerPC 440-specific
positioning of the read/write flags.
(ppc_linux_watchpoint_addr_within_range): Handle PowerPC 440
4-bytes alignment.

Use ptid_t.tid to store thread ids instead of ptid_t.pid.

* win32-nat.c (win32_add_thread): Change thread argument type to
ptid_t.  Adjust.
(win32_add_thread): Adjust.
(win32_delete_thread): Change thread argument type to ptid_t.
Adjust.
(win32_fetch_inferior_registers, win32_store_inferior_registers)
(win32_resume, get_win32_debug_event, get_win32_debug_event)
(win32_wait, win32_pid_to_exec_file, win32_pid_to_str): Adjust.
(init_win32_ops): Put to_magic last.
(win32_win32_thread_alive): Adjust.

* readelf.c (is_64bit_abs_reloc): Return true for R_MIPS_64.

* ldfile.c (ldfile_open_file_search): Use concat.
(try_open): Don't use a fixed size pathname buffer.
(ldfile_find_command_file): Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_open_dynamic_archive): If
using EXTRA_SHLIB_EXTENSION, don't open twice.

* elf.c (bfd_elf_get_elf_syms): Don't leak memory on error.
* elflink.c (_bfd_elf_link_read_relocs): bfd_release on error.
(elf_link_add_object_symbols): Don't leak memory on error.
(bfd_elf_size_dynsym_hash_dynstr): Likewise.
(elf_fixup_link_order): Free sections.

* doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.

* remote-m32r-sdi.c (m32r_thread_alive, m32r_pid_to_str): New.
(init_m32r_ops): Register m32r_thread_alive and m32r_pid_to_str.

* remote-m32r-sdi.c: Include "gdbthread.h".
(remote_m32r_ptid): New.
(m32r_close): Delete the main thread.
(m32r_resume): Set inferior_ptid toA remote_m32r_ptid. Add the
main thread.
(m32r_kill, m32r_load, sdireset_command): Delete the main thread.
(_initialize_remote_m32r): Initialize remote_m32r_ptid.

daily update

*** empty log message ***

gdb/
* aclocal.m4, configure: Rebuild.
* configure.in: Call ZW_CREATE_DEPDIR,
ZW_PROG_COMPILER_DEPENDENCIES, AC_PROG_MAKE_SET.
(MAKE, GMAKE): New substs.
* acinclude.m4: Include depstand.m4.
* Makefile.in (DEPMODE, DEPDIR, COMPILE.post, COMPILE.pre,
COMPILE, POSTCOMPILE, depcomp): New variables.
Remove all _h variables.
Remove many .o targets.
($(srcdir)/copying.c): avoid backslash-newline after comment
sign (@maintainer_mode_true@).
(HFILES_NO_SRCDIR): Regenerate.
(generated_files): New variable.
(all_gdbtk_cflags): Likewise.
(.c.o): Rewrote.
(init.o, version.o, copying.o): Remove.
(distclean): Remove DEPDIR.
(test-cp-name-parser.o, hpux-thread.o, main.o, monitor.o,
printcmd.o, procfs.o, v850ice.o): Rewrite.
(cli-cmds.o, cli-decode.o, cli-dump.o, cli-interp.o, cli-logging.o,
cli-script.o, cli-setshow.o, cli-utils.o): Likewise.
(gdbtk.o, gdbtk-bp.o, gdbtk-cmds.o, gdbtk-hooks.o, gdbtk-interp.o,
gdbtk-main.o, gdbtk-register.o, gdbtk-stack.o, gdbtk-varobj.o,
gdbtk-wrapper.o): Likewise.
(mi-cmd-break.o, mi-cmd-disas.o, mi-cmd-env.o, mi-cmd-file.o,
mi-cmds.o, mi-cmd-stack.o, mi-cmd-target.o, mi-cmd-var.o,
mi-console.o, mi-getopt.o, mi-interp.o, mi-main.o, mi-out.o,
mi-parse.o, mi-symbol-cmds.o, mi-common.o, signals.o, tui.o,
tui-command.o, tui-data.o, tui-disasm.o, tui-file.o, tui-hooks.o,
tui-interp.o, tui-io.o, tui-layout.o, tui-main.o, tui-out.o,
tui-regs.o, tui-source.o, tui-stack.o, tui-win.o, tui-windata.o,
tui-wingeneral.o, tui-winsource.o): Likewise.
(all_object_files): New variable.
($(all_object_files)): New target.
Include dependency files, when using GNU Make.

gdb/gdbserver/
* Makefile.in (GDBREPLAY_OBS): New variable.
(gdbreplay$(EXEEXT)): Use it to avoid unportable $^.

ChangeLog:

* spu-tdep.c (info_spu_dma_cmdlist): Only show entries with
the valid bit set.  Ensure display order respects partial
order defined by dependency bits.

testsuite/ChangeLog:

* gdb.arch/spu-info.exp: Updated for "info spu dma" changes.

bfd/
* elf-bfd.h (elf_backend_data): Add a "rela_plts_and_copies_p" field.
* elfxx-target.h (elf_backend_rela_plts_and_copies_p): New macro.
(elfNN_bed): Use it.
* elf.c (_bfd_elf_get_synthetic_symtab): Use rela_plts_and_copies_p
instead of default_use_rela_p to choose between ".rel.plt" and
".rela.plt".
* elflink.c (_bfd_elf_create_dynamic_sections): Use
rela_plts_and_copies_p instead of default_use_rela_p to choose
between ".rel.plt" and ".rela.plt", and between ".rel.bss" and
".rela.bss".

bfd/
* elf-bfd.h (MIPS_ELF_TDATA): New elf_object_id.
* elf32-mips.c (bfd_elf32_mkobject): Define.
* elf64-mips.c (bfd_elf64_mkobject): Likewise.
* elfn32-mips.c (bfd_elf32_mkobject): Likewise.
* elfxx-mips.h (_bfd_mips_elf_mkobject): Declare.
* elfxx-mips.c (is_mips_elf): New macro.
(_bfd_mips_elf_mkobject): New function.
(_bfd_mips_elf_final_link): Use is_mips_elf.
(_bfd_mips_elf_merge_private_bfd_data): Likewise.

bfd/
* elfxx-mips.c (mips_elf_record_relocs): Defer allocation of a
global GOT entry when deferring allocation of dynamic relocations.
(allocate_dynrelocs): When allocating deferred dynamic relocations,
also do the deferred allocation of a GOT entry.

bfd/
* elfxx-mips.c (mips_got_info): Add a "reloc_only_gotno" field.
(mips_elf_got_section): Delete.
(mips_elf_sort_hash_table): Use g->reloc_only_gotno to decide
how many reloc-only entries there are.
(mips_elf_count_got_symbols): Adjust g->reloc_only_gotno as
well as g->global_gotno.
(mips_elf_make_got_per_bfd): Initialize reloc_only_gotno.
(mips_elf_multi_got): Likewise.  Use gg->reloc_only_gotno
rather than gg->assigned_gotno to store the number of
reloc-only GOT entries.
(mips_elf_create_got_section): Remove the MAYBE_EXCLUDE parameter.
Initialize reloc_only_gotno.
(mips_elf_calculate_relocation): Check htab->got_info instead of
dynobj when deciding whether to call mips_elf_adjust_gp,
(_bfd_mips_elf_create_dynamic_sections): Adjust the call
to mips_elf_create_got_section.
(mips_elf_record_relocs): Likewise.  Remove redundant
"dynobj == NULL" code.  Do not use mips_elf_create_got_section
or mips_elf_record_global_got_symbol for R_MIPS_32, R_MIPS_REL32
and R_MIPS_64; limit global_got_area to GGA_RELOC_ONLY instead.
(_bfd_mips_elf_finish_dynamic_symbol): Use htab->sgot instead
of mips_elf_got_section.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Likewise.
Move the initial assignment of G to the block that uses it;
it is used for an unrelated purpose later.

ld/testsuite/
* ld-mips-elf/tls-hidden4.got, ld-mips-elf/tls-hidden4.r: We have
removed an unused GOT entry that was allocated for the R_MIPS_32
relocation against "undef", so adjust addresses down by 4 bytes.
* ld-mips-elf/got-dump-1.d, ld-mips-elf/got-dump-2.d: We have
changed the order of the GOT entries so that reloc-only ones
come last.  "undef" is only referred to by dynamic relocations,
so it now comes after "glob".
* ld-mips-elf/mips16-pic-2.dd, ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd, ld-mips-elf/mips16-pic-2.rd: We have
removed two unused local GOT entries that were originally created
as global entries for the hidden symbols "used2" and "used3".
"used4" and "used5" are only referred to by relocations, so they
now come after "used6" and "used7".

merge from gcc

bfd/
* elfxx-mips.c (count_section_dynsyms): Move before the new first use.
(mips_elf_sort_hash_table): Take the output bfd as a parameter.
Remove the MAX_LOCAL parameter.  Exit early if there are no
dynamic symbols, if there is no dynobj, or if there is no
GOT section.  Use count_section_dynsyms instead of MAX_LOCAL.
Assert == rather than <= when checking hsd.max_unref_got_dynindx.
Also assert that g->global_gotno is right.
(mips_elf_count_forced_local_got_symbols): Rename to...
(mips_elf_count_got_symbols): ...and count global GOT entries too.
Set the global_got_area of a forced-local GGA_RELOC_ONLY symbol
to GGA_NONE.
(mips_elf_multi_got): Don't sort the symbol table.
(mips_elf_lay_out_got): Likewise.  Use mips_elf_count_got_symbols
to count the number of global GOT entries.
(_bfd_mips_elf_final_link): Unconditionally call
mips_elf_sort_hash_table.

bfd/
* elfxx-mips.c (GGA_NORMAL, GGA_RELOC_ONLY, GGA_NONE): New macros.
(mips_elf_link_hash_entry): Add a "global_got_area" field.
(mips_elf_link_hash_newfunc): Initialize it.
(mips_elf_sort_hash_table_f): Use h->global_got_area instead of
h->root.got.offset.  Do not handle forced_local symbols specially.
(mips_elf_record_global_got_symbol): Set h->global_got_area
instead of h->root.got.offset.
(mips_elf_recreate_got): Assert that h->global_got_area == GGA_NONE
for indirect and warning symbols.
(mips_elf_count_forced_local_got_symbols): Change the argument
from a "elf_link_hash_entry" to "mips_elf_link_hash_entry".
Use and set h->global_got_area instead of h->root.got.offset.
Set it to GGA_NONE for all forced-local symbols.
(mips_elf_set_global_got_offset): Set h->global_got_area
instead of h->root.got.offset.  Use g->global_got_area instead
of a combination of dynindx, forced_local and tls_type.
(mips_elf_multi_got): Remove disabled code.  Pass GGA_* values to
mips_elf_set_global_got_offset.
(mips_elf_lay_out_got): Use mips_elf_link_hash_traverse instead
of elf_link_hash_traverse.
(_bfd_mips_elf_copy_indirect_symbol): Copy the indirect symbol's
global_got_area to the direct symbol if the latter's value is higher.
Set the indirect symbol's area to GGA_NONE.

ld/testsuite/
* ld-mips-elf/got-vers-1a.s, ld-mips-elf/got-vers-1b.s,
ld-mips-elf/got-vers-1.ver, ld-mips-elf/got-vers-1.dd,
ld-mips-elf/got-vers-1.sd, ld-mips-elf/got-vers-1.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.

bfd/
* elf32-mips.c (elf_backend_hide_symbol): Delete.
* elfn32-mips.c (elf_backend_hide_symbol): Likewise.
* elf64-mips.c (elf_backend_hide_symbol): Likewise.
* elfxx-mips.h (elf_backend_hide_symbol): Likewise.
* elfxx-mips.c (mips_elf_link_hash_entry): Remove "forced_local"
and add "needs_lazy_stub".
(mips_elf_link_hash_newfunc): Update accordingly.
(mips_elf_link_hash_table): Remove "computed_got_sizes" and
add "lazy_stub_count".
(_bfd_mips_elf_link_hash_table_create): Update accordingly.
(mips_elf_output_extsym): Use hd->needs_lazy_stub to detect
cases where a lazy stub is being used.
(mips_elf_sort_hash_table_f): Use h->root.forced_local instead
of h->forced_local.
(mips_elf_record_global_got_symbol): Use _bfd_elf_link_hash_hide_symbol
instead of _bfd_mips_elf_hide_symbol.  Do not increment local_gotno
here.
(mips_elf_allocate_dynamic_relocations): Move before new first use.
(mips_elf_check_recreate_got, mips_elf_recreate_got): New functions.
(mips_elf_resolve_final_got_entries): Move earlier in file.  Make at
most two passes over the hash table.  Use mips_elf_check_recreate_got
to see if there are any indirect or warning entries and
mips_elf_recreate_got to create a new GOT without them.
Return a boolean success value.
(mips_elf_count_forced_local_got_entries): New function.
(mips_elf_make_got_per_bfd): Check h->root.forced_local instead of
h->forced_local.
(mips_elf_set_global_got_offset): Likewise.
(mips_elf_set_no_stub): Replace with...
(mips_elf_forbid_lazy_stubs): ...this new function.
(mips_elf_resolve_final_got_entry): Delete.
(mips_elf_multi_got): Fix formatting.  Use mips_elf_forbid_lazy_stubs
instead of mips_elf_set_no_stub.  Move the code that sets
global offsets and allocates dynamic relocations from the main
_bfd_mips_elf_size_dynamic_sections loop to here.
(_bfd_mips_elf_adjust_dynamic_symbol): Do not allocate room in
.MIPS.stubs here; just set hmips->needs_lazy_stub and increment
htab->lazy_stub_count.
(_bfd_mips_elf_always_size_sections): Move the stub-estimation
code to mips_elf_estimate_stub_size and the GOT-sizing code to
mips_elf_lay_out_got.  Do not call these functions here.
(mips_elf_estimate_stub_size): New function, split
out from _bfd_mips_elf_always_size_sections.  Call
mips_elf_resolve_final_got_entries earlier.  Count the number
of forced-local entries.  Do not add stub sizes to loadable_size;
after this patch, the stub sizes are already included in the main
estimate.  Allocate dynamic relocations here rather than in the
main _bfd_mips_elf_size_dynamic_sections loop.
(mips_elf_estimate_stub_size): New function, split out from
_bfd_mips_elf_always_size_sections.
(mips_elf_allocate_lazy_stub): New function.
(mips_elf_lay_out_lazy_stubs): Likewise.
(_bfd_mips_elf_size_dynamic_sections): Call mips_elf_estimate_stub_size,
mips_elf_lay_out_got and mips_elf_lay_out_lazy_stubs.  Do not handle
the allocation of sreldyn specially.
(_bfd_mips_elf_hide_symbol): Delete.

ld/testsuite/
* ld-mips-elf/tlsdyn-o32-2.got, ld-mips-elf/tlsdyn-o32-3.got,
ld-mips-elf/tlsdyn-o32-2.d, ld-mips-elf/tlsdyn-o32-3.d: Change the
GOT layout as follows:

         BEFORE                  AFTER
   +0x08 %call16(__tls_get_addr) %call16(__tls_get_addr)
   +0x0c %tlsldm(tlsbin_ld)      %gottprel(tlsvar_ie)
   +0x10   "  "                  %tlsgd(tlsvar_gd)
   +0x14 %tlsgd(tlsvar_gd)          "  "
   +0x18   "  "                  %tlsgd(tlsbin_gd)
   +0x1c %gottprel(tlsvar_ie)       "  "
   +0x20 %tlsgd(tlsbin_gd)       %tlsldm(tlsbin_ld)
   +0x24   "  "                     "  "
   +0x28 %gottprel(tlsbin_ie)    %gottprel(tlsbin_ie)

bfd/
* elfxx-mips.c (allocate_dynrelocs): Ignore indirect and warning
symbols.

ld/testsuite/
* ld-mips-elf/reloc-estimate-1.d, ld-mips-elf/reloc-estimate-1.ld,
ld-mips-elf/reloc-estimate-1a.s, ld-mips-elf/reloc-estimate-1b.s:
New test.
* ld-mips-elf/mips-elf.exp: Run it.

2008-08-06  Cary Coutant <ccoutant@google.com>

* archive.cc (Archive::total_archives, Archive::total_members)
(Archive::total_members_loaded): New variables.
(Archive::setup): Add parameter.  Add option to preread
archive symbols.
(Archive::read_armap): Add counter.
(Archive::get_file_and_offset): New function.
(Archive::get_elf_object_for_member): New function.
(Archive::read_all_symbols): New function.
(Archive::read_symbols): New function.
(Archive::add_symbols): Add counters.
(Archive::include_all_members): Use armap to find members if it's
already built.
(Archive::include_member): Skip reading symbols if already read.
Factored code into Archive::get_file_and_offset and
Archive::get_elf_object_for_member.  Changed call to
Mapfile::report_include_archive_member.
(Archive::print_stats): New function.
* archive.h: Declare Object and Read_symbols_data classes.
(Archive::Archive): Add initializers for new members.
(Archive::setup): Add parameter.
(Archive::print_stats): New function.
(Archive::total_archives, Archive::total_members)
(Archive::total_members_loaded): New variables.
(Archive::get_file_and_offset): New function.
(Archive::get_elf_object_for_member): New function.
(Archive::read_all_symbols): New function.
(Archive::read_symbols): New function.
(Archive::Archive_member): New class.
(Archive::members_): New member.
(Archive::num_members_): New member.
* main.cc: Include archive.h.
(main): Call Archive::print_stats.
* mapfile.cc (Mapfile::report_include_archive_member): Delete
archive parameter; member_name is now the fully-decorated name.
* mapfile.h (Mapfile::report_include_archive_member): Likewise.
* options.h: (General_options): Add --preread-archive-symbols option.
* readsyms.cc (Read_symbols::do_read_symbols): Change call to
Archive::setup.

2008-08-06  Cary Coutant <ccoutant@google.com>

* archive.cc (Archive::total_archives, Archive::total_members)
(Archive::total_members_loaded): New variables.
(Archive::setup): Add parameter.  Add option to preread
archive symbols.
(Archive::read_armap): Add counter.
(Archive::get_file_and_offset): New function.
(Archive::get_elf_object_for_member): New function.
(Archive::read_all_symbols): New function.
(Archive::read_symbols): New function.
(Archive::add_symbols): Add counters.
(Archive::include_all_members): Use armap to find members if it's
already built.
(Archive::include_member): Skip reading symbols if already read.
Factored code into Archive::get_file_and_offset and
Archive::get_elf_object_for_member.  Changed call to
Mapfile::report_include_archive_member.
(Archive::print_stats): New function.
* archive.h: Declare Object and Read_symbols_data classes.
(Archive::Archive): Add initializers for new members.
(Archive::setup): Add parameter.
(Archive::print_stats): New function.
(Archive::total_archives, Archive::total_members)
(Archive::total_members_loaded): New variables.
(Archive::get_file_and_offset): New function.
(Archive::get_elf_object_for_member): New function.
(Archive::read_all_symbols): New function.
(Archive::read_symbols): New function.
(Archive::Archive_member): New class.
(Archive::members_): New member.
(Archive::num_members_): New member.
* main.cc: Include archive.h.
(main): Call Archive::print_stats.
* mapfile.cc (Mapfile::report_include_archive_member): Delete
archive parameter; member_name is now the fully-decorated name.
* mapfile.h (Mapfile::report_include_archive_member): Likewise.
* options.h: (General_options): Add --preread-archive-symbols option.
* readsyms.cc (Read_symbols::do_read_symbols): Change call to
Archive::setup.

*** empty log message ***

daily update

* solib-pa64.c (read_dld_descriptor): Return zero if load map is not
setup.

* i386obsd-nat.c (i386obsd_supply_pcb): Adjust for changes in
OpenBSD 4.3.

bfd/
* elfxx-mips.c (mips_elf_link_hash_entry): Move bfd_boolean
fields to the end of the structure and make them single-bit
bitfields.
(mips_elf_link_hash_newfunc): Make the initialization statements
follow the new field order.

bfd/
* elfxx-mips.c (_mips_elf_section_data): Remove the "u.got_info" field.
(mips_elf_link_hash_table): Add "sgot" and "got_info" fields.
(_bfd_mips_elf_link_hash_table_create): Initialize them.
(mips_elf_got_section): Always apply the !maybe_excluded behavior.
(mips_elf_got_info): Delete.
(mips_elf_initialize_tls_slots): Remove the DYNOBJ local variable.
Adjust the call to mips_elf_got_section.
(mips_elf_local_got_index): Don't call mips_elf_got_info.
Update the call to mips_elf_create_local_got_entry.
Use htab->got_info.
(mips_elf_global_got_index): Don't call mips_elf_got_info;
use htab->got_info and htab->sgot instead.
(mips_elf_got_page): Don't call mips_elf_got_info.  Update the
call to mips_elf_create_local_got_entry.
(mips_elf_got16_entry): Likewise.
(mips_elf_got_offset_from_index): Replace with DYNOBJ parameter
with an INFO parameter.  Don't call mips_elf_got_info; use htab->sgot
and htab->got_info instead.
(mips_elf_create_local_got_entry): Remove the GG and SGOT parameters.
Use htab->sgot and htab->got_info.
(mips_elf_sort_hash_table): Remove the DYNOBJ local variable.
Don't call mips_elf_got_info; use htab->got_info instead.
(mips_elf_record_global_got_symbol): Turn G from a paramter to
a local variable and read it from htab->got_info.
(mips_elf_record_local_got_symbol): Replace the G parameter with
an INFO parameter.  Make G a local variable and read it from
htab->got_info instead.
(mips_elf_record_got_page_entry): Likewise.
(mips_elf_multi_got): Remove the G parameter and make it a local
variable instead.  Read it from htab->got_info.
(mips_elf_create_got_section): Cache the GOT section in htab->sgot.
Store the GOT information in htab->got_info.
(mips_elf_calculate_relocation): Don't call mips_elf_got_section
and mips_elf_got_info; use htab->sgot and htab->got_info instead.
Adjust the calls to mips_elf_got_offset_from_index and
mips_elf_adjust_gp.
(_bfd_mips_elf_check_relocs): Remove the G and SGOT local variables.
Adjust the calls to mips_elf_record_local_got_symbol,
mips_elf_record_global_got_symbol and mips_elf_record_got_page_entry.
Use htab->sgot.
(_bfd_mips_elf_always_size_sections): Remove the DYNOBJ local variable.
Don't call mips_elf_got_info; use htab->sgot and htab->got_info instead.
Update the call to mips_elf_multi_got.
(_bfd_mips_elf_size_dynamic_sections): Don't call mips_elf_got_info;
use htab->got_info instead.
(_bfd_mips_elf_finish_dynamic_symbol): Update the call to
mips_elf_got_section.  Get the got_info from the hash table
rather than the GOT section.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Likewise.
(_bfd_mips_elf_hide_symbol): Don't call mips_elf_got_section;
get the got_info from the hash table instead.  Remove the GOT
local variable.
(_bfd_mips_elf_final_link): Likewise.  Also remove the DYNOBJ
local variable.

bfd/
* elfxx-mips.c (mips_elf_link_hash_table): Add an "sstubs" field.
(_bfd_mips_elf_create_dynamic_sections): Use it to cache the stubs
section.  Don't check whether the section already exists.
(_bfd_mips_elf_adjust_dynamic_symbol): Use htab->sstubs.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Likewise.
(_bfd_mips_elf_size_dynamic_sections): Likewise.  Don't add the
dummy stub to an empty section.
(_bfd_mips_elf_link_hash_table_create): Initialize the "sstubs" field.

ld/testsuite/
* ld-mips-elf/tls-hidden3.ld: Remove the unused .MIPS.stubs section.
Keep the text start address the same.
* ld-mips-elf/tls-multi-got-1.got: We have removed a .MIPS.stubs
section that contained only a 16-byte dummy stub.  Subtract 16
from addresses to account for the change.
* ld-mips-elf/tls-multi-got-1.r: Likewise.  Adjust MIPS_UNREFEXTNO
to account the removed section symbol.
* ld-mips-elf/tlsdyn-o32-1.d: We have deleted a .MIPS.stubs
section that contained only a 16-byte dummy stub.  Remove it
from the disassembly.
* ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* ld-mips-elf/tlsdyn-o32.d: Likewise.
* ld-mips-elf/relax-jalr-n32-shared.d: Likewise.
* ld-mips-elf/relax-jalr-n64-shared.d: Likewise.

bfd/
* reloc.c (BFD_RELOC_MIPS16_GOT16, BFD_RELOC_MIPS16_CALL16): Declare.
* libbfd.h, bfd-in2.h: Regenerate.
* elf32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_reloc_map): Add mappings.
* elf64-mips.c (mips16_elf64_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfn32-mips.c (elf_mips16_howto_table_rel): Fill in reserved
R_MIPS16_GOT16 and R_MIPS16_CALL16 entries.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Add mappings.
* elfxx-mips.c (mips_elf_create_shadow_symbol): New function.
(section_allows_mips16_refs_p): Likewise.
(mips16_stub_symndx): Likewise.
(mips_elf_check_mips16_stubs): Treat the data argument as a
bfd_link_info.  Mark every dynamic symbol as needing MIPS16 stubs
and create a "shadow" symbol for the original MIPS16 definition.
(mips16_reloc_p, got16_reloc_p, call16_reloc_p, hi16_reloc_p)
(lo16_reloc_p, mips16_call_reloc_p): New functions.
(_bfd_mips16_elf_reloc_unshuffle): Use mips16_reloc_p to generalize
relocation checks.
(_bfd_mips16_elf_reloc_shuffle): Likewise.
(_bfd_mips_elf_lo16_reloc): Handle R_MIPS16_GOT16.
(mips_elf_got16_entry): Add comment.
(mips_elf_calculate_relocation): Use hi16_reloc_p,
lo16_reloc_p, mips16_call_reloc_p, call16_reloc_p and got16_reloc_p
to generalize relocation checks.  Use section_allows_mips16_refs_p
instead of mips16_stub_section_p.   Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16, allowing the former to refer directly to a
MIPS16 function if its stub is not needed.
(mips16_stub_section_p): Delete.
(_bfd_mips_elf_symbol_processing): Convert odd-valued function
symbols into even MIPS16 symbols.
(mips_elf_add_lo16_rel_addend): Use mips16_reloc_p to generalize
a relocation check.
(_bfd_mips_elf_check_relocs): Calculate "bed" and "rel_end"
earlier in the function.  Use mips16_stub_symndx to identify
the target function.  Avoid out-of-bounds accesses when the
stub has no relocations; report an error instead.  Use
section_allows_mips16_refs_p instead of mips16_stub_section_p.
Use mips16_call_reloc_p and got16_reloc_p to generalize relocation
checks.  Handle R_MIPS16_CALL16 and R_MIPS16_GOT16.  Don't create
dynamic relocations for absolute references to __gnu_local_gp.
(_bfd_mips_elf_always_size_sections): Pass a bfd_link_info as
the argument to mips_elf_check_mips16_stubs.  Generalize comment.
(_bfd_mips_elf_relocate_section): Use hi16_reloc_p and got16_reloc_p
to generalize relocation checks.
(_bfd_mips_elf_finish_dynamic_symbol): If a dynamic MIPS16 function
symbol has a non-MIPS16 stub, redirect the symbol to the stub.
Fix an overly long line.  Don't give dynamic symbols type STO_MIPS16.
(_bfd_mips_elf_gc_sweep_hook): Handle R_MIPS16_CALL16 and
R_MIPS16_GOT16.

gas/
* config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
(lo16_reloc_p): New functions.
(reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
generalize relocation checks.
(matching_lo_reloc): New function.
(fixup_has_matching_lo_p): Use it.
(mips16_mark_labels): Don't clobber a symbol's visibility.
(append_insn): Use hi16_reloc_p and lo16_reloc_p.
(mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
(md_apply_fix): Likewise.
(mips16_percent_op): Add %got and %call16.
(mips_frob_file): Use got16_reloc_p to generalize relocation checks.
Use matching_lo_reloc.
(mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
generalize relocation checks.
(mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
checks.

gas/testsuite/
* gas/mips/elf-rel8-mips16.d, gas/mips/elf-rel8-mips16.s,
* gas/mips/elf-rel9-mips16.d, gas/mips/elf-rel9-mips16.s,
* gas/mips/elf-rel13-mips16.d, gas/mips/elf-rel13-mips16.s: New tests.
* gas/mips/mips.exp: Run them.

ld/testsuite/
* ld-mips-elf/mips16-local-stubs-1.d: Remove stub_for_h3,
which was only referenced by the .pdr section, and was not
actually needed by code.
* ld-mips-elf/mips16-intermix.d: Remove unused static function stubs.
* ld-mips-elf/mips16-pic-1a.s,
ld-mips-elf/mips16-pic-1b.s,
ld-mips-elf/mips16-pic-1-dummy.s,
ld-mips-elf/mips16-pic-1.dd,
ld-mips-elf/mips16-pic-1.gd,
ld-mips-elf/mips16-pic-1.inc,
ld-mips-elf/mips16-pic-1.ld,
ld-mips-elf/mips16-pic-2a.s,
ld-mips-elf/mips16-pic-2b.s,
ld-mips-elf/mips16-pic-2.ad,
ld-mips-elf/mips16-pic-2.dd,
ld-mips-elf/mips16-pic-2.gd,
ld-mips-elf/mips16-pic-2.nd,
ld-mips-elf/mips16-pic-2.rd: New tests.
* ld-mips-elf/mips-elf.exp: Run them.

Initial python support.

gdb/
2008-08-06  Vladimir Prus  <vladimir@codesourcery.com>
    Tom Tromey  <tromey@redhat.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>
    Doug Evans  <dje@google.com>

* Makefile.in (SUBDIR_PYTHON_OBS, SUBDIR_PYTHON_SRCS,
SUBDIR_PYTHON_DEPS, SUBDIR_PYTHON_LDFLAGS, SUBDIR_PYTHON_CFLAGS,
PYTHON_CFLAGS): New.
(python_h, python_internal_h): New.
(cli-script.o): Depend on python.h
(python.o, python-utils.o): New.
* cli/cli-script.c (print_command_lines): Handle python_control.
(execute_control_command): Handle python_control.
(execute_control_command_untraced): New function.
(while_command): Call execute_control_command_untraced.
(if_command): Likewise.
(get_command_line): Remove static attribute.
(read_next_line): Handle "python".
(recurse_read_control_structure): Handle python_control.
(read_command_lines): Handle python_control.
Include python.h.
* cli/cli-script.h (get_command_line): Add prototype.
(execute_control_command_untraced): Likewise.
* configure.ac: Add --with-python.
* defs.h (enum command_control_type) <python_control>: New
constant.
* python/python-internal.h: New file.
* python/python.c: New file.
* python/python.h: New file.
* python/python-utils.c: New file.
* NEWS: Mention Python scripting support and its new commands.

gdb/doc/
2008-08-06  Tom Tromey  <tromey@redhat.com>

* gdb.texinfo (Extending GDB): New chapter.
(Sequences): Demoted chapter, now a section under the new
Extending GDB chapter.
(Python): New section.

gdb/testsuite/
2008-08-06  Tom Tromey  <tromey@redhat.com>

* gdb.python/python.exp: New file.

* spu-tdep.c (spu_gdbarch_init): Call set_gdbarch_frame_red_zone_size.

* NEWS: Mention these changes.

* config/tc-h8300.h (H_TICK_HEX): Define.
* config/tc-h8300.c (OPTION_H_TICK_HEX): New.
(md_longopts): Add "-h-tick-hex".
(md_parse_option): Support it.
* doc/c-h8300.texi (H8/300 Options): Document it.
* doc/as.texinfo (Overview): Likewise.

* config/tc-sh.h (H_TICK_HEX): Define.
* config/tc-sh.c (OPTION_H_TICK_HEX): New.
(md_longopts): Add "-h-tick-hex".
(md_parse_option): Support it.
* doc/c-sh.texi (SH Options): Document it.
* doc/c-sh64.texi (SH64 Options): Document it.
* doc/as.texinfo (Overview): Likewise.

2008-08-06  Phil Muldoon  <pmuldoon@redhat.com>

        * MAINTAINERS (Write After Approval): Add self.

Fix for PR gdb/1543.
* gdb.base/sep.exp: `sep-proc.c' absolute line numbers replaced with
$LOCATION.
(location): New variable.
* config/cfdbug.exp, config/d10v.exp, config/dve.exp, config/i960.exp,
config/m32r.exp, config/mn10300-eval.exp, config/proelf.exp,
config/rom68k.exp, config/sh.exp, config/unix.exp, config/vr4300.exp,
config/vr5000.exp, config/vxworks.exp, gdb.arch/altivec-regs.exp,
gdb.arch/e500-abi.exp, gdb.arch/e500-regs.exp, gdb.asm/asm-source.exp,
gdb.base/a2-run.exp, gdb.base/advance.exp, gdb.base/all-bin.exp,
gdb.base/args.exp, gdb.base/arithmet.exp, gdb.base/assign.exp,
gdb.base/async.exp, gdb.base/auxv.exp, gdb.base/bigcore.c,
gdb.base/bigcore.exp, gdb.base/bitfields.exp, gdb.base/bitops.exp,
gdb.base/break.c, gdb.base/break.exp, gdb.base/break1.c,
gdb.base/call-ar-st.exp, gdb.base/call-rt-st.exp,
gdb.base/call-strs.exp, gdb.base/callfuncs.c, gdb.base/callfuncs.exp,
gdb.base/checkpoint.exp, gdb.base/chng-syms.exp,
gdb.base/code-expr.exp, gdb.base/commands.exp, gdb.base/completion.exp,
gdb.base/complex.exp, gdb.base/cond-expr.exp, gdb.base/condbreak.exp,
gdb.base/consecutive.exp, gdb.base/corefile.exp, gdb.base/cvexpr.c,
gdb.base/cvexpr.exp, gdb.base/dbx.exp, gdb.base/default.exp,
gdb.base/define.exp, gdb.base/del.c, gdb.base/detach.exp,
gdb.base/display.exp, gdb.base/dump.exp, gdb.base/echo.exp,
gdb.base/environ.exp, gdb.base/eval-skip.exp, gdb.base/exprs.exp,
gdb.base/fileio.exp, gdb.base/find.exp, gdb.base/finish.exp,
gdb.base/funcargs.exp, gdb.base/gcore-buffer-overflow.exp,
gdb.base/gcore.exp, gdb.base/gdb1555.exp, gdb.base/gdbvars.exp,
gdb.base/help.exp, gdb.base/huge.exp, gdb.base/info-proc.exp,
gdb.base/interrupt.exp, gdb.base/jump.exp, gdb.base/langs.exp,
gdb.base/lineinc.exp, gdb.base/list.exp, gdb.base/macscp.exp,
gdb.base/maint.exp, gdb.base/mips_pro.exp, gdb.base/miscexprs.exp,
gdb.base/nodebug.exp, gdb.base/nofield.c, gdb.base/opaque.exp,
gdb.base/overlays.exp, gdb.base/page.exp, gdb.base/pc-fp.exp,
gdb.base/pending.c, gdb.base/pendshr.c, gdb.base/pointers.exp,
gdb.base/psymtab.exp, gdb.base/ptype.exp, gdb.base/randomize.c,
gdb.base/readline.exp, gdb.base/recurse.exp, gdb.base/regs.exp,
gdb.base/relational.exp, gdb.base/relocate.exp, gdb.base/remote.exp,
gdb.base/reread.exp, gdb.base/return.exp, gdb.base/return2.exp,
gdb.base/scope.exp, gdb.base/sect-cmd.exp, gdb.base/sep-proc.c,
gdb.base/sep.c, gdb.base/sep.exp, gdb.base/sepdebug.c,
gdb.base/sepdebug.exp, gdb.base/setshow.exp, gdb.base/shlib-call.exp,
gdb.base/sigaltstack.c, gdb.base/so-indr-cl.exp, gdb.base/solib.exp,
gdb.base/source.exp, gdb.base/start.c, gdb.base/step-bt.c,
gdb.base/step-line.exp, gdb.base/structs.c, gdb.base/structs.exp,
gdb.base/structs2.exp, gdb.base/term.exp, gdb.base/twice.exp,
gdb.base/type-opaque.exp, gdb.base/until.exp,
gdb.base/value-double-free.c, gdb.base/varargs.exp,
gdb.base/watchpoint.exp, gdb.base/whatis-exp.exp, gdb.disasm/am33.exp,
gdb.disasm/h8300s.exp, gdb.disasm/hppa.exp, gdb.disasm/mn10300.exp,
gdb.disasm/sh3.exp, gdb.disasm/t01_mov.exp, gdb.disasm/t02_mova.exp,
gdb.disasm/t03_add.exp, gdb.disasm/t04_sub.exp, gdb.disasm/t05_cmp.exp,
gdb.disasm/t06_ari2.exp, gdb.disasm/t07_ari3.exp,
gdb.disasm/t08_or.exp, gdb.disasm/t09_xor.exp, gdb.disasm/t10_and.exp,
gdb.disasm/t11_logs.exp, gdb.disasm/t12_bit.exp,
gdb.disasm/t13_otr.exp, gdb.fortran/exprs.exp, gdb.fortran/types.exp,
gdb.hp/gdb.aCC/exception.exp, gdb.hp/gdb.aCC/optimize.exp,
gdb.hp/gdb.aCC/watch-cmd.exp, gdb.hp/gdb.base-hp/callfwmall.exp,
gdb.hp/gdb.base-hp/dollar.exp, gdb.hp/gdb.base-hp/hwwatchbus.exp,
gdb.hp/gdb.base-hp/pxdb.exp, gdb.hp/gdb.base-hp/reg-pa64.exp,
gdb.hp/gdb.base-hp/reg.exp, gdb.hp/gdb.base-hp/sized-enum.exp,
gdb.hp/gdb.base-hp/so-thresh.exp, gdb.hp/gdb.compat/xdb1.exp,
gdb.hp/gdb.compat/xdb2.exp, gdb.hp/gdb.compat/xdb3.exp,
gdb.java/jmisc.exp, gdb.java/jv-exp.exp, gdb.java/jv-print.exp,
gdb.mi/gdb669.exp, gdb.mi/gdb680.exp, gdb.mi/gdb701.exp,
gdb.mi/gdb792.exp, gdb.mi/mi-basics.exp, gdb.mi/mi-console.exp,
gdb.mi/mi-hack-cli.exp, gdb.mi/mi-pending.c, gdb.mi/mi-pendshr.c,
gdb.mi/mi-pthreads.exp, gdb.mi/mi-read-memory.exp, gdb.mi/mi-regs.exp,
gdb.mi/mi-syn-frame.exp, gdb.mi/mi-until.exp, gdb.mi/mi2-basics.exp,
gdb.mi/mi2-console.exp, gdb.mi/mi2-hack-cli.exp,
gdb.mi/mi2-pthreads.exp, gdb.mi/mi2-read-memory.exp,
gdb.mi/mi2-regs.exp, gdb.mi/mi2-syn-frame.exp, gdb.mi/mi2-until.exp,
gdb.pascal/types.exp, gdb.stabs/weird.exp,
gdb.threads/gcore-thread.exp, gdb.threads/manythreads.exp,
gdb.threads/print-threads.exp, gdb.threads/pthreads.exp,
gdb.threads/schedlock.exp, gdb.threads/step.exp, gdb.threads/step2.exp,
gdb.threads/switch-threads.exp, gdb.threads/thread-specific.exp,
gdb.threads/thread_check.exp, gdb.threads/thread_events.exp,
gdb.threads/tls-nodebug.exp, gdb.threads/tls-shared.exp,
gdb.threads/tls.exp, gdb.trace/actions.exp, gdb.trace/backtrace.exp,
gdb.trace/circ.exp, gdb.trace/collection.exp, gdb.trace/deltrace.exp,
gdb.trace/infotrace.exp, gdb.trace/limits.exp, gdb.trace/packetlen.exp,
gdb.trace/passc-dyn.exp, gdb.trace/passcount.exp, gdb.trace/report.exp,
gdb.trace/save-trace.exp, gdb.trace/tfind.exp, gdb.trace/tracecmd.exp,
gdb.trace/while-dyn.exp, gdb.trace/while-stepping.exp,
lib/mi-support.exp, lib/trace-support.exp: Remove reference
to bug-gdb@prep.ai.mit.edu .

2008-08-06  Phil Muldoon  <pmuldoon@redhat.com>

* breakpoint.c (hw_breakpoint_used_count): Use breakpoint_enabled.
(insert_breakpoint_locations): Likewise.

* elf32-ppc.c (ppc_elf_relax_section): Clear R_PPC_PLTREL24 addend.
(ppc_elf_relocate_section <R_PPC_RELAX32_PLT>): Don't bother here.

2008-08-05  Phil Muldoon  <pmuldoon@redhat.com>

* breakpoint.c (create_longjmp_breakpoint): Remove unused struct
breakpoint.
(set_longjmp_breakpoint): Likewise.

add pr number

binutils/
* objcopy.c (copy_object): Don't setup_bfd_headers when extract_symbol.
(setup_section): Don't zero vma and lma when extract_symbol.
(copy_section): Discard relocations when extract_symbol.
* doc/binutils.texi: Update --extract-symbol description.
ld/testsuite/
* ld-elf/extract-symbol-1sec.d: Update.

*** empty log message ***

daily update

* linux-low.c (linux_resume_one_process): Ignore ESRCH.
(usr_store_inferior_registers): Likewise.
(regsets_store_inferior_registers): Likewise.

2008-08-04  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

PR build/2490
* solib-pa64.c: Only compile if both HAVE_ELF_HP_H and __LP64__ are
defined.

* bcache.c (deprecated_bcache_added): Initialize obstack.
(bcache_xmalloc): Don't initialize obstack.
(bcache_xfree): Conditionally free obstack.
(bcache_memory_used): Update.

* symfile.c (add_psymbol_to_bcache): Return a const pointer.  Use
bcache_full.
(append_psymbol_to_list): Accept a const pointer.
(add_psymbol_to_list): Fix const correctness.
* bcache.h: (deprecated_bcache_added, deprecated_bcache): Remove.
(bcache_full): Declare.
* bcache.c (bcache_data, deprecated_bcache): Remove.
(bcache): Use bcache_full.
(bcache_full): Rename from deprecated_bcache_added.  Change return
type.

* gmon_io.c (gmon_out_read): When reading old format gmon.out,
set num_histograms and hist_scale.

PR gas/6656
* dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
debug info if we see compiler generated debug info.
(dwarf2_directive_loc): Likewise.  Remove redundant debug_type test.

* coffcode.h (coff_slurp_line_table): bfd_alloc lineno_cache first
so that we don't inadvertently free it.  Use bfd_alloc for sort
arrays, and memcpy sorted line table.

* solib-svr4.c (BKPT_AT_SYMBOL): Remove, always defined.
(bkpt_names): Remove SOLIB_BKPT_NAME, never defined.
(enable_break): Remove test of BKPT_AT_SYMBOL.

daily update

*** empty log message ***

* symtab.h (Symbol::use_plt_offset): New function.
* i386.cc (Relocate::relocate): Call Symbol::use_plt_offset.
* powerpc.cc (Relocate::relocate): Likewise.
* sparc.cc (Relocate::relocate): Likewise.
* x86_64.cc (Relocate::relocate): Likewise.
* testsuite/weak_plt.sh: New test.
* testsuite/weak_plt_main.cc: New test.
* testsuite/weak_plt_shared.cc: New test.
* testsuite/Makefile.am (check_SCRIPTS): Add weak_plt.sh.
(check_PROGRAMS): Add weak_plt.
(check_DATA): Add weak_plt_shared.so.
(weak_plt_main_pic.o, weak_plt): New targets.
(weak_plt_shared_pic.o, weak_plt_shared.so): New targets.
* testsuite/Makefile.in: Rebuild.

* testsuite/Makefile.am (weak_alias_test_1.so): Depend upon
gcctestdir/ld.
(weak_alias_test_2.so, weak_alias_test_4.so): Likewise.
* testsuite/Makefile.in: Rebuild.

* elf32-spu.c (spu_elf_auto_overlay): Use the maximum possible
if --fixed-space request is too large.

* dwarf2dbg.c: Remove superfluous forward function declarations.
(DWARF2_FORMAT): Add section arg.
(out_header): New function, split out from..
(out_debug_line): ..here.
(out_debug_aranges): Use out_header.
(out_debug_abbrev): Add info_seg and line_seg args.  Use
DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
(out_debug_info): Use out_header.  Output 8 byte DW_AT_stmt_list
if line_seg is 64-bit.
(dwarf2_finish): Adjust out_debug_abbrev call.
* config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
* config/tc-mips.c (mips_dwarf2_format): Likewise.

Set LC_ALL=C rather than unsetting LC_COLLATE for sort.

daily update

*** empty log message ***

* readelf.c (get_osabi_name <ELFOSABI_AROS>): Change name.

* common.h (ELFOSABI_AROS): Update comment.

* mt-spu (all-ld): Update for ld Makefile changes.

* Makefile.am (spu_ovl.o): Merge rule into..
(spu_ovl.o_c): ..this one.  Only run cpp for spu target.
* Makefile.in: Regenerate.

*** empty log message ***

daily update

    * acinclude.m4: Include ../config/tcl.m4 to pick up
        standard Tcl configury bits.
        Remove all Tcl, Tk, Itcl, Itk, etc definitions.
        * configure.ac: Don't check if ../itcl exists when building
        gdbtk. It could be installed.
        Rewrite gdbtk configury to allow for using system-supplied
        Tcl and Tk. Gdbtk no longer requires build-time access to
        itcl and itk.
        * Makefile.in: Remove everything related to itcl and itk.
        Rewrite the Tcl bits for gdbtk to correspond to rewrite of
        configure.ac.
        Remove v850ice.o build rule.
        (ALL_TCL_CFLAGS): New convenience defintion. Change all
        gdbtk sources to use it.
        * configure: Regenerate.

    * tcl.m4 (SC_PATH_TCLCONFIG): Add some simple logic to deal
        with cygwin.
        (SC_PATH_TKCONFIG): Likewise.

Include the spu_ovl ASCII form in the repository files.
* emultempl/spuelf.em: No longer use `bin2c', use now `spu_ovl.o_c'.
* Makefile.am (eelf32_spu.c): Depend now on `spu_ovl.o_c'.
($(srcdir)/emultempl/spu_ovl.o_c): New target.
($(srcdir)/emultempl/spu_ovl.o): Rename to...
(spu_ovl.o): ...this one.
* Makefile.in: Regenerate.
* emultempl/spu_ovl.o_c: New file.
* emultempl/spu_ovl.o: File removed.

* elf32-spu.c (mark_overlay_section): Move code calculating
max_overlay_size to correct block.
(spu_elf_auto_overlay): Don't use %x in einfo error message.

gas/
* config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
Handle -mvsx and -mpower7.
(md_show_usage): Document -mpower7 and -mvsx.
* doc/as.texinfo (Target PowerPC): Document -mvsx.
* doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.

gas/testsuite/
* gas/ppc/power7.d: New.
* gas/ppc/power7.s: Likewise.
* gas/ppc/ppc.exp: Run power7 test.

include/opcode/
* ppc.h (PPC_OPCODE_VSX, PPC_OPERAND_VSR): New.

opcodes/
* ppc-dis.c (powerpc_init_dialect): Handle power7 and vsx options.
(print_insn_powerpc): Prepend 'vs' when printing VSX registers.
(print_ppc_disassembler_options): Document -Mpower7 and -Mvsx.
* ppc-opc.c (insert_xt6): New static function.
(extract_xt6): Likewise.
(insert_xa6): Likewise.
(extract_xa6: Likewise.
(insert_xb6): Likewise.
(extract_xb6): Likewise.
(insert_xb6s): Likewise.
(extract_xb6s): Likewise.
(XS6, XT6, XA6, XB6, XB6S, DM, XX3, XX3DM, XX1_MASK, XX3_MASK,
XX3DM_MASK, PPCVSX): New.
(powerpc_opcodes): Add opcodes "lxvd2x", "lxvd2ux", "stxvd2x",
"stxvd2ux", "xxmrghd", "xxmrgld", "xxpermdi", "xvmovdp", "xvcpsgndp".

daily update

*** empty log message ***

Missed ChangeLog entry for last change.

* Makefile.am ($(srcdir)/ia64-asmtab.c): Remove line continuation.
* Makefile.in: Regenerate.

* Makefile.am ($(srcdir)/ia64-asmtab.c): Remove line continuation.
* Makefile.in: Regenerate.

binutils/

2008-08-01  H.J. Lu  <hongjiu.lu@intel.com>

* dwarf.c (dwarf_regnames_i386): Remove AVX registers.
(dwarf_regnames_x86_64): Likewise.

gas/testsuite/

2008-08-01  H.J. Lu  <hongjiu.lu@intel.com>

* gas/cfi/cfi-i386.s: Remove tests for AVX register maps.
* gas/cfi/cfi-x86_64.s: Likewise.

* gas/cfi/cfi-i386.d: Updated.
* gas/cfi/cfi-x86_64.d: Likewise.

opcodes/

2008-08-01  H.J. Lu  <hongjiu.lu@intel.com>

* i386-reg.tbl: Use Dw2Inval on AVX registers.
* i386-tbl.h: Regenerated.

* elfcore.h (elf_core_file_p): Ensure we have a backend match
with the correct arch size before rejecting the generic fallback.
* elfcode.h (elf_object_p): Likewise.  Ensure arch size matches
before accepting a target.

* elf.c (rewrite_elf_program_header): Don't wrap p_paddr to
include file or program headers.

gas/
* config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
<cell>: Likewise.

gas/testsuite/
* gas/ppc/cell.s: Add altivec instructions.
* gas/ppc/cell.d: Update expected output.
* gas/ppc/power6.d: New.
* gas/ppc/power6.s: Likewise.
* gas/ppc/ppc.exp (powerpc64*-*-*): Move cell from here to...
(powerpc*-*-*): Here.  Run power6 test.

* coffread.c (coff_symtab_read): Remove FUNCTION_EPILOGUE_SIZE.

* gdbint.texinfo: Remove FUNCTION_EPILOGUE_SIZE.

daily update