*** empty log message ***

* config/tc-m32c.c (md_convert_frag): Fix ADJNZ reloc math.

    * configure.in: Deactivate large-file support on native x86-solaris
        as well unless the user explicitly requested it.
        * configure: Regenerate.

bfd:
* elf32-arm.c (elf32_arm_final_link_relocate): Do not turn
branches to undefine weak symbols into branches to the next
instruction if creating PLT entries for those symbols.

ld/testsuite:
* ld-arm/thumb2-bl-undefweak.d, ld-arm/thumb2-bl-undefweak.s: New.
* ld-arm/arm-elf.exp: Run thumb2-bl-undefweak test.

    * elflink.c (is_reloc_section): New function.  Returns true if the
        given name matches the name of the reloc-containing section
        associated with the given section.
        (get_dynamic_reloc_section_name): New function.  Computes the name
        of the section that contains the dynamic relocs associated with
        the given section.
        (_bfd_elf_get_dynamic_reloc_section): New function.  Returns a
        pointer to the section containing the dynamic relocs associated
        with the given section.
        (_bfd_elf_make_dynamic_reloc_section): New function.  Creates a
        section to contain the dynamic relocs associated with a given
        section.
        * elf-bfd.h: Prototype the new functions.
        * elf-m10300.c (mn10300_elf_check_relocs): Use new functions.
        (mn10300_elf_final_link_relocs): Likewise.
        * elf32-arm.c (reloc_section_p): Delete - replaced by new
        functions.
        (elf32_arm_final_link_relocate): Use new functions.
        (elf32_arm_check_relocs): Likewise.
        * elf32-cris.c (cris_elf_relocate_section): Likewise.
        (elf_cris_check_relocs): Likewise.
        * elf32-hppa.c (elf32_hppa_check_relocs): Likewise.
        * elf32-i370.c (i370_elf_check_relocs): Likewise.
        (i370_elf_relocate_section): Likewise.
        * elf32-i386.c (elf_i386_check_relocs): Likewise.
        * elf32-m32r.c (m32r_elf_relocate_section): Likewise.
        (m32r_elf_check_relocs): Likewise.
        * elf32-m68k.c (elf_m68k_check_relocs): Likewise.
        * elf32_ppc.c (ppc_elf_check_relocs): Likewise.
        (ppc_elf_relocate_section): Likewise.
        * elf32-s390.c (elf_s390_check_relocs): Likewise.
        * elf32-sh.c (sh_elf_relocate_section): Likewise.
        (sh_elf_check_relocs): Likewise.
        * elf32-vax.c (elf_vax_check_relocs): Likewise.
        (elf_vax_relocate_section): Likewise.
        * elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
        * elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
        * elf64-s390.c (elf_s390_check_relocs): Likewise.
        * elf64-sh64.c (sh_elf64_relocate_section): Likewise.
        * elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.
        * elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise.
        * elf32-bfin.c (bfin_check_relocs): Remove redundant local
        variable 'sreloc'.
        (bfin_relocate_section): Likewise.
        * elf32-v850.c (v850_elf_check_relocs): Likewise.

    * m68k-dis.c: Rewrite to remove use of setjmp/longjmp.

    PR7044
        * dlltool.c (run): Use formatting string to avoid compile time
        warning.
        (gen_exp_file): Check return value from fread.
        * windmc.c (main): Check return value from fread.

* ld-cris/got7.s, ld-cris/init.s, ld-cris/pic-gc-72.d,
ld-cris/pic-gc-72.s, ld-cris/pic-gc-73.d, ld-cris/pic-gc-73.s,
ld-cris/tls-dso-x1x2-1.d, ld-cris/tls-dso-xz-1.d,
ld-cris/tls-dtprelm.s, ld-cris/tls-e-20.d, ld-cris/tls-e-20a.d,
ld-cris/tls-e-21.d, ld-cris/tls-e-22.d, ld-cris/tls-e-23.d,
ld-cris/tls-e-66.d, ld-cris/tls-err-20x.d, ld-cris/tls-err-24.d,
ld-cris/tls-err-25.d, ld-cris/tls-err-26.d, ld-cris/tls-err-27.d,
ld-cris/tls-err-28.d, ld-cris/tls-err-29.d, ld-cris/tls-err-31.d,
ld-cris/tls-err-33.d, ld-cris/tls-err-35.d, ld-cris/tls-err-37.d,
ld-cris/tls-err-39.d, ld-cris/tls-err-40.d, ld-cris/tls-err-41.d,
ld-cris/tls-err-43.d, ld-cris/tls-err-44.d, ld-cris/tls-err-45.d,
ld-cris/tls-err-47.d, ld-cris/tls-err-48.d, ld-cris/tls-err-49.d,
ld-cris/tls-err-51.d, ld-cris/tls-err-52.d, ld-cris/tls-err-53.d,
ld-cris/tls-err-55.d, ld-cris/tls-err-55.s, ld-cris/tls-err-56.d,
ld-cris/tls-err-56.s, ld-cris/tls-err-62.d, ld-cris/tls-err-62.s,
ld-cris/tls-err-65.d, ld-cris/tls-err-67.d, ld-cris/tls-gc-68.d,
ld-cris/tls-gc-69.d, ld-cris/tls-gc-70.d, ld-cris/tls-gc-71.d,
ld-cris/tls-gc-71.s, ld-cris/tls-gc-75.d, ld-cris/tls-gc-76.d,
ld-cris/tls-gc-76.s, ld-cris/tls-gd-1.d, ld-cris/tls-gd-1.s,
ld-cris/tls-gd-1h.d, ld-cris/tls-gd-2.d, ld-cris/tls-gd-2.s,
ld-cris/tls-gd-2h.d, ld-cris/tls-gd-3.d, ld-cris/tls-gd-3.s,
ld-cris/tls-gd-3h.d, ld-cris/tls-gdgotrelm.s, ld-cris/tls-global-74.d,
ld-cris/tls-gottprelm.s, ld-cris/tls-hx.s, ld-cris/tls-hx1x2.s,
ld-cris/tls-ie-10.d, ld-cris/tls-ie-10.s, ld-cris/tls-ie-11.d,
ld-cris/tls-ie-11.s, ld-cris/tls-ie-8.d, ld-cris/tls-ie-8.s,
ld-cris/tls-ie-9.d, ld-cris/tls-ie-9.s, ld-cris/tls-ld-4.d,
ld-cris/tls-ld-4.s, ld-cris/tls-ld-5.d, ld-cris/tls-ld-5.s,
ld-cris/tls-ld-6.d, ld-cris/tls-ld-6.s, ld-cris/tls-ld-7.d,
ld-cris/tls-ld-7.s, ld-cris/tls-ldgd-14.d, ld-cris/tls-ldgd-14.s,
ld-cris/tls-ldgd-15.d, ld-cris/tls-ldgd-15.s, ld-cris/tls-ldgde-14.d,
ld-cris/tls-ldgde-15.d, ld-cris/tls-ldgdex-14.d,
ld-cris/tls-ldgdex-15.d, ld-cris/tls-ldgdx-14.d,
ld-cris/tls-ldgdx-15.d, ld-cris/tls-le-12.d, ld-cris/tls-le-12.s,
ld-cris/tls-le-12s.d, ld-cris/tls-le-12s.s, ld-cris/tls-le-13.d,
ld-cris/tls-le-13.s, ld-cris/tls-le-13s.d, ld-cris/tls-le-13s.s,
ld-cris/tls-legd-16.d, ld-cris/tls-legd-16.s, ld-cris/tls-legd-17.d,
ld-cris/tls-legdx-16.d, ld-cris/tls-legdx-17.d, ld-cris/tls-leie-18.d,
ld-cris/tls-leie-19.d, ld-cris/tls-leie-19.s, ld-cris/tls-local-54.d,
ld-cris/tls-local-54.s, ld-cris/tls-local-57.d,
ld-cris/tls-local-57.s, ld-cris/tls-local-58.d,
ld-cris/tls-local-58.s, ld-cris/tls-local-59.d,
ld-cris/tls-local-59.s, ld-cris/tls-local-60.d,
ld-cris/tls-local-61.d, ld-cris/tls-local-63.d,
ld-cris/tls-local-64.d, ld-cris/tls-ok-30.d, ld-cris/tls-ok-32.d,
ld-cris/tls-ok-34.d, ld-cris/tls-ok-36.d, ld-cris/tls-tprelm.s,
ld-cris/tls-und-38.d, ld-cris/tls-und-42.d, ld-cris/tls-und-46.d,
ld-cris/tls-und-50.d, ld-cris/tls-x.s, ld-cris/tls-x1x2.s,
ld-cris/tls-z.s, ld-cris/tls128.s, ld-cris/tls128g.s: New tests.

Implement TLS for CRIS.
* elf32-cris.c: Include limits.h.
(TLSHOWTO16): Redefine in terms of and move contents to...
(TLSHOWTO16X): New macro.
(TLSHOWTO16S, LGOT_REG_NDX, LGOT_DTP_NDX, LGOT_ALLOC_NELTS_FOR)
(elf_cris_hash_entry): New macros.
(cris_elf_howto_table): Make R_CRIS_16_DTPREL,
R_CRIS_16_GOT_TPREL, R_CRIS_16_TPREL check overflow for signed,
not unsigned values.
(cris_info_to_howto_rela): Make r_type a enum elf_cris_reloc_type,
not unsigned int.
(struct elf_cris_link_hash_entry): New members reg_got_refcount,
tprel_refcount, and dtp_refcount.
(struct elf_cris_link_hash_table): New member dtpmod_refcount.
(elf_cris_link_hash_newfunc): Initialize new members.
(elf_cris_link_hash_table_create): Similar.
(cris_final_link_relocate, elf_cris_reloc_type_class): Use a
temporary variable when testing the relocation type.
(cris_elf_gc_mark_hook): Ditto.  Add default case where needed.
(cris_elf_gc_sweep_hook): Ditto.  Handle reference-counting for
the new assembly-generated relocs.  Rewrite refcount handling to
set temporary variables to pointers to reloc-specific variables
and entry size and common code for the update.
(additional_relocation_error_msg_count): New variable.
(cris_elf_relocate_section): Use a function-local variable srelgot
for the .rela.got section instead of looking it up for every need.
Make r_type a enum elf_cris_reloc_type, not int.  Actually set
symname for non-local symbols.  Handle new assembly-generated
relocs.  For overflow, emit additional messages for the new 16-bit
relocs as well as R_CRIS_16_GOTPLT and R_CRIS_16_GOT.
(elf_cris_finish_dynamic_symbol): Use elf_cris_finish_dynamic_symbol
instead of plain casts.  Check new hash entry member
reg_got_refcount when checking whether to emit a GOT entry.
(elf_cris_finish_dynamic_sections): Update head comment to warn
about emitting relocs here.  Use a temporary variable when testing
the relocation type.
(elf_cris_discard_excess_program_dynamics)
(elf_cris_adjust_gotplt_to_got): Handle reference counting change
regarding h->reg_got_refcount.
(cris_elf_check_relocs): Rewrite refcount handling to set
temporary variables and entry size and common code for the update
for local symbols.  Use new macro elf_cris_hash_entry.  Adjust
allocation for change in reference counting of GOT entries for
local symbols.
(elf_cris_size_dynamic_sections): Adjust calculated size of
.got.plt and .rela.got if we need a GOT entry for a
R_CRIS_DTPMOD relocation.
(elf_cris_got_elt_size): New function.
(elf_backend_got_elt_size): Define.

* cris.h (R_CRIS_32_TPREL): Correct comment.
(R_CRIS_DTPMOD): Open up for use elsewhere than the fourth GOT entry.

* ld-cris/start1.s: Prepend register name with $.

* ld-cris/dso-1.s, ld-cris/libdso-1.d, ld-cris/libdso-11.d,
ld-cris/libdso-2.d, ld-cris/pv32.s, ld-cris/undef1.d: Correct
.size expressions and adjust expected output accordingly.

*** empty log message ***

daily update

* ada-lang.c (value_from_contents_and_address): Move...
* value.c: ... here.
* ada-lang.h (value_from_contents_and_address): Move
declaration...
* value.h: ... here.

* Makefile.in (VERSION,DIST,LINT,LINTFLAGS): Delete, unused.

2008-11-24  Paul Pluzhnikov  <ppluzhnikov@google.com>

* valprint.c (val_print_array_elements): Pass correct
element address to val_print.

* server.c (handle_v_run): Always use the supplied argument list.

Fix access of an already freed memory.
* parse.c (parse_field_expression): Call xstrdup on `*name'.
* completer.c (expression_completer): Free fieldname.

PR gdb/2474
* remote.c (remote_read_description_p): New function.
(remote_start_remote): Try to fetch the target description
before adding shared libraries.  Try again later if the
target is running but stopped.
(remote_open_1): Mark extended targets as exited by default.
(remote_read_description): Check target_has_execution.

* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind_cache): Use
        the frame address in block instead of the return address to
        locate the mdebug PDR of the frame.

* ldlang.c (lang_record_phdrs): Don't add orphans to PT_INTERP header.

Fix typo last change

daily update

*** empty log message ***

* ld-cris/badgotr1.d: Robustify regexp.

daily update

*** empty log message ***

* gdb.texinfo (M68K Features): Fix typo.

    Remove the unused BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK.

        * breakpoint.h (enum bpstat_what_main_action): Remove
        BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK.
        * breakpoint.c (bpstat_what): Delete catch_shlib_event from enum class.
        Remove the BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK column from
        variable table.
        * infrun.c (wait_for_inferior): Remove handling of
        BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK.

*** empty log message ***

daily update

* configure: Rebuild.
* configure.ac: Merge calls to AC_CHECK_FUNCS, AC_CHECK_HEADERS,
AC_CHECK_DECLS, and AC_CHECK_MEMBERS.

2008-11-19  Sterling Augustine  <sterling@tensilica.com>

       * MAINTAINERS: Take over from Bob Wilson as Xtensa maintainer.

2008-11-21  Sterling Augustine  <sterling@tensilica.com>

        * xtensa-isa.c (xtensa_state_is_shared_or): New function.

2008-11-21  Sterling Augustine  <sterling@tensilica.com>

        * xtensa-isa-internal.h (XTENSA_STATE_IS_SHARED_OR): New flag.
        * xtensa-isa.h (xtensa_state_is_shared_or): New prototype.

2008-11-21  Sterling Augustine  <sterling@tensilica.com>

        * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call
        xtensa_state_is_shared_or to allow multiple opcodes within a
        single FLIX bundle to write to these special states.

merge from gcc

* python/python-internal.h (PyGILState_Ensure): New define.
(PyGILState_Release): Likewise.
(PyEval_InitThreads): Likewise.
(PyThreadState_Swap): Likewise.
(PyEval_InitThreads): Likewise.
* python/python.c (_initialize_python): Initialize threads.
Release GIL.
(eval_python_from_control_command): Acquire GIL.
(python_command): Likewise.
* python/python-internal.h (make_cleanup_py_restore_gil):
Declare.
* python/python-utils.c (py_gil_restore): New function.
(make_cleanup_py_restore_gil): Likewise.

(Chunk I forgot to commit on 2008-11-14).

2008-11-13  Tristan Gingold  <gingold@adacore.com>

* makefile.vms (OBJS): Update objects list.
(CFLAGS): Update.
(libiberty.olb): Remove alloca-conf.h dependency.
* config.h-vms: Use new macro sets, use builtin alloca.

* elf-bfd.h (struct elf_backend_data): New member got_elt_size.
(_bfd_elf_default_got_elt_size): Declare.
* elflink.c (struct alloc_got_off_arg): Replace member got_elt_size
by new member info.
(elf_gc_allocate_got_offsets): Adjust for calling bed->got_elt_size
to get the element size instead of using a gofarg entry.
(bfd_elf_gc_common_finalize_got_offsets): Similar.
(_bfd_elf_default_got_elt_size): New function.
* elfxx-target.h: New macro elf_backend_got_elt_size.
(elfNN_bed): Use it.

*** empty log message ***

daily update

* frame.c (frame_debug_got_null_frame): Remove file arg.
All callers updated.

* gdb.base/foll-fork.exp (catch_fork_child_follow): Fix patterns
matching syscall entry point.
* gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
(tcatch_vfork_then_child_follow): Likewise.  Finish through
vfork even if we stopped at the syscall trampoline.

* infrun.c (resume): If following a fork, also reset regcache,
gdbarch and pc.

* printcmd.c (sym_info): Don't print the offset if it's zero.

* gdb.base/sepsymtab.exp: Update, old "info sym" format restored.

* infrun.c (resume): If following a fork, reread the current
thread.  Avoid dereferencing a possibly dangling pointer.

2008-11-20  Tristan Gingold  <gingold@adacore.com>

* bfdwin.c: Fix comment.

2008-11-20  Tristan Gingold  <gingold@adacore.com>

* bfd.c (is32bit): Use architecture information for non-ELF
targets.

* elf32-ppc.c (allocate_dynrelocs): Always use tlsld_got for
TLS_LD even when symbol is used with other TLS reloc types.
(ppc_elf_relocate_section): Bypass symbol checks when using tlsld_got.
Leave addend zero on LD DTPMOD dynamic reloc.

Forgot to save entry before commit:
* config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
on symbols in TLS relocs.

* inferior.h (proceed_to_finish): Delete, unused.
(stop_registers): Tweak comment.
* infrun.c (stop_registers): Tweak comment.

daily update

*** empty log message ***

* frv-tdep.c (frv_skip_main_prologue): New function.
(frv_gdbarch_init): Register frv_skip_main_prologue.
* solib-frv.c (fetch_loadmap): Return early when no segments are
found.
(frv_relocate_main_executable): Return early when both interpreter
and executable loadmap addresses are zero.

gdb/
* xtensa-config.c (rmap): Remove entries for ar32 through ar63.  Add
threadptr, scompare1, mmid, epc5, epc6, epc7, eps5, eps6, eps7,
excsave5, excsave6, excsave7, cpenable, and vecbase registers.
(xtensa_submask0, xtensa_submask1, xtensa_submask2)
(xtensa_submask3, xtensa_submask4, xtensa_submask5, xtensa_submask6)
(xtensa_submask7, xtensa_submask8, xtensa_submask9, xtensa_submask10)
(xtensa_submask11, xtensa_submask12, xtensa_submask13, xtensa_submask14)
(xtensa_submask15): Adjust register numbers.
* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
(xtensa_regmap_table): Add entry for scompare1.
* regformats/reg-xtensa.dat: Remove ar32 through ar63.  Add threadptr
and scompare1.
gdb/gdbserver/
* xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
(xtensa_regmap_table): Add entry for scompare1.

include/
* xtensa-config.h (XCHAL_HAVE_MUL16, XCHAL_HAVE_MUL32, XCHAL_HAVE_DIV32)
(XCHAL_HAVE_MINMAX, XCHAL_HAVE_SEXT, XCHAL_HAVE_THREADPTR)
(XCHAL_HAVE_RELEASE_SYNC, XCHAL_HAVE_S32C1I): Change to 1.
(XCHAL_NUM_AREGS): Change to 32.
(XCHAL_ICACHE_SIZE, XCHAL_DCACHE_SIZE): Change to 16K.
(XCHAL_ICACHE_LINESIZE, XCHAL_DCACHE_LINESIZE): Change to 32.
(XCHAL_ICACHE_LINEWIDTH, XCHAL_DCACHE_LINEWIDTH): Change to 5.
(XCHAL_DCACHE_IS_WRITEBACK): Change to 1.
(XCHAL_DEBUGLEVEL): Change to 6.
bfd/
* xtensa-modules.c (sysregs): Add MMID, VECBASE, EPC5, EPC6, EPC7,
EXCSAVE5, EXCSAVE6, EXCSAVE7, EPS5, EPS6, EPS7, CPENABLE,
SCOMPARE1, and THREADPTR registers.
(NUM_SYSREGS, MAX_USER_REG): Update.
(states): Change width of INTERRUPT, WindowBase, WindowStart, and
INTENABLE.  Add VECBASE, EPC5, EPC6, EPC7, EXCSAVE5, EXCSAVE6,
EXCSAVE7, EPS6, EPS6, EPS7, THREADPTR, CPENABLE, and SCOMPARE1 states.
(NUM_STATES): Update.
(enum xtensa_state_id): Add entries for new states.
(enum xtensa_field_id): Add entries for xt_wbr15_imm and xt_wbr18_imm
fields, along with functions to extract and set them.
(regfiles): Change number of AR registers to 32.
(Operand_ar0_encode, Operand_ar4_encode, Operand_ar8_encode,
Operand_ar12_encode, Operand_ars_entry_encode): Update register mask.
(operands): Add entries for tp7, xt_wbr15_label, xt_wbr18_label,
xt_wbr15_imm, and xt_wbr18_imm operands, along with functions to
encode and decode them.
(enum xtensa_operand_id): Add entries for new operands.
(Iclass_xt_iclass_rfi_stateArgs): Add EPC5, EPC6, EPC7, EPS5, EPS6, and
EPC7 states.
(Iclass_xt_iclass_rfdo_stateArgs): Replace EPC4 and EPS4 by EPC6 and
EPS6, respectively.
(iclasses): Add entries for rur_threadptr, wur_threadptr,
xt_iclass_wsr_176, xt_iclass_rsr_epc5, xt_iclass_wsr_epc5,
xt_iclass_xsr_epc5, xt_iclass_rsr_excsave5, xt_iclass_wsr_excsave5,
xt_iclass_xsr_excsave5, xt_iclass_rsr_epc6, xt_iclass_wsr_epc6,
xt_iclass_xsr_epc6, xt_iclass_rsr_excsave6, xt_iclass_wsr_excsave6,
xt_iclass_xsr_excsave6, xt_iclass_rsr_epc7, xt_iclass_wsr_epc7,
xt_iclass_xsr_epc7, xt_iclass_rsr_excsave7, xt_iclass_wsr_excsave7,
xt_iclass_xsr_excsave7, xt_iclass_rsr_eps5, xt_iclass_wsr_eps5,
xt_iclass_xsr_eps5, xt_iclass_rsr_eps6, xt_iclass_wsr_eps6,
xt_iclass_xsr_eps6, xt_iclass_rsr_eps7, xt_iclass_wsr_eps7,
xt_iclass_xsr_eps7, xt_iclass_rsr_vecbase, xt_iclass_wsr_vecbase,
xt_iclass_xsr_vecbase, xt_iclass_mul16, xt_iclass_wsr_mmid,
xt_iclass_icache_lock, xt_iclass_dcache_lock, xt_iclass_rsr_cpenable,
xt_iclass_wsr_cpenable, xt_iclass_xsr_cpenable, xt_iclass_clamp,
xt_iclass_minmax, xt_iclass_sx, xt_iclass_l32ai, xt_iclass_s32ri,
xt_iclass_s32c1i, xt_iclass_rsr_scompare1, xt_iclass_wsr_scompare1,
xt_iclass_xsr_scompare1, xt_iclass_div, and xt_iclass_mul32, along
with corresponding argument and state argument arrays.  Change
number of state arguments for xt_iclass_rfi.  Add arguments for
xt_iclass_rfdo.
(enum xtensa_iclass_id): Add entries for new iclasses.
(opcodes): Add entries for RUR_THREADPTR, WUR_THREADPTR, WSR_176,
RSR_EPC5, WSR_EPC5, XSR_EPC5, RSR_EXCSAVE5, WSR_EXCSAVE5, XSR_EXCSAVE5,
RSR_EPC6, WSR_EPC6, XSR_EPC6, RSR_EXCSAVE6, WSR_EXCSAVE6, XSR_EXCSAVE6,
RSR_EPC7, WSR_EPC7, XSR_EPC7, RSR_EXCSAVE7, WSR_EXCSAVE7, XSR_EXCSAVE7,
RSR_EPS5, WSR_EPS5, XSR_EPS5, RSR_EPS6, WSR_EPS6, XSR_EPS6, RSR_EPS7,
WSR_EPS7, XSR_EPS7, RSR_VECBASE, WSR_VECBASE, XSR_VECBASE, MUL16U,
MUL16S, WSR_MMID, IPFL, IHU, IIU, DPFL, DHU, DIU, RSR_CPENABLE,
WSR_CPENABLE, XSR_CPENABLE, CLAMPS, MIN, MAX, MINU, MAXU, SEXT, L32AI,
S32RI, S32C1I, RSR_SCOMPARE1, WSR_SCOMPARE1, XSR_SCOMPARE1, QUOU, QUOS,
REMU, REMS, and MULL opcodes, along with the corresponding functions
to encode them.
(enum xtensa_opcode_id): Add entries for new opcodes.
(Slot_inst_decode): Handle new opcodes.
(Slot_inst_get_field_fns, Slot_inst_set_field_fns): Add entries for
xt_wbr15_imm and xt_wbr18_imm fields.
(Slot_inst16a_get_field_fns, Slot_inst16a_set_field_fns): Likewise.
(Slot_inst16b_get_field_fns, Slot_inst16b_set_field_fns): Likewise.
(xtensa_modules): Update number of fields, operands, iclasses and
opcodes.

Change documentation license to FDL v1.3

* remote.c (escape_buffer): New.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it.  Make
sure debug output printing a packet buffer goes through a single
fprintf_unfiltered call.
* utils.c (vfprintf_unfiltered): If outputting timestamps, end
output with a newline if it wasn't going to already.

    * elf.c (swap_out_syms) [USE_STT_COMMON]: Fix syntax error.

    PR 7027
        * elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Treat WPLT30 relocs
        against local symbols in 64-bit binaries as if they were WDISP30
        relocs.
        (_bfd_sparc_elf_relocate_section): Likewise.

* gas/cris/rd-tls-1.d, gas/cris/rd-tls-1.s: Use a local thread
variable instead of .text location for :GD decoration test.

* config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
on symbols in TLS relocs.

daily update

*** empty log message ***

2008-11-18  Paul Pluzhnikov  <ppluzhnikov@google.com>

* maint.c (maintenance_translate_address): Fix a buglet.

gdb/
* features/Makefile (rs6000/powerpc-isa205-32l-expedite,
rs6000/powerpc-isa205-altivec32l-expedite,
powerpc-isa205-vsx32l-expedite, rs6000/powerpc-isa205-64l-expedite,
rs6000/powerpc-isa205-altivec64l-expedite,
powerpc-isa205-vsx64l-expedite): New variables.
* regformats/rs6000/powerpc-isa205-32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx32l.dat: Generate.
* regformats/rs6000/powerpc-isa205-64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-altivec64l.dat: Generate.
* regformats/rs6000/powerpc-isa205-vsx64l.dat: Generate.

gdbserver/
* Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
powerpc-isa205-64l.o, powerpc-isa205-64l.c,
powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
* configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
XML target descriptions.
* linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
when inferior is running on an ISA 2.05 or later processor.  Add
special case to return offset for full 64-bit slot of FPSCR when
in 32-bits.

gdb/
* ppc-linux-nat.c (ppc_register_u_addr): Add special case to return
offset for full 64-bit slot of FPSCR when in 32-bits.
(ppc_linux_read_description): Return target description with 64-bit
FPSCR when inferior is running on an ISA 2.05 or later processor.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Call
initialize_tdec_powerpc_isa205_32l,
initialize_tdec_powerpc_isa205_altivec32l,
initialize_tdec_powerpc_isa205_vsx32l,
initialize_tdec_powerpc_isa205_64l,
initialize_tdec_powerpc_isa205_altivec64l and
initialize_tdec_powerpc_isa205_vsx64l.
* ppc-linux-tdep.h: Add external declaration for
tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l,
tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_isa205_64l,
tdesc_powerpc_isa205_altivec64l and tdesc_powerpc_isa205_vsx64l.
* features/rs600/powerpc-fpu-isa205.xml: New file.
* features/rs600/powerpc-isa205-32l.xml: New file.
* features/rs600/powerpc-isa205-64l.xml: New file.
* features/rs600/powerpc-isa205-altivec32l.xml: New file.
* features/rs600/powerpc-isa205-altivec64l.xml: New file.
* features/rs600/powerpc-isa205-vsx32l.xml: New file.
* features/rs600/powerpc-isa205-vsx64l.xml: New file.
* features/rs600/powerpc-isa205-32l.c: Generate.
* features/rs600/powerpc-isa205-64l.c: Generate.
* features/rs600/powerpc-isa205-altivec32l.c: Generate.
* features/rs600/powerpc-isa205-altivec64l.c: Generate.
* features/rs600/powerpc-isa205-vsx32l.c: Generate.
* features/rs600/powerpc-isa205-vsx64l.c: Generate.

gdb/testsuite/
* gdb.arch/ppc-dfp.exp: New file.
* gdb.arch/ppc-dfp.c: New file.

2008-11-18  Paul Pluzhnikov  <ppluzhnikov@google.com>

* objfiles.h: New MULTI_OBJFILE_P macro.
* printcmd.c (sym_info): Print object name.
* maint.c (maintenance_translate_address): Likewise.

2008-11-18  Joel Sherrill <joel.sherrill@oarcorp.com>

* configure: Regenerated.
* configure.ac: Add test for System V shared memory and semaphore.
* debug.c, debug.h: Add trace support for new devices.
* hw_sem.c, hw_shm.c: New files.
* Makefile.in: Add hw_sem.c and hw_shm.c.

    * gdb.texinfo (Set Catchpoints): Remove the documentation of
        commands "catch load" and "catch unload".

    * NEWS: Document the removal of "catch load" and "catch unload".

Add support for ARM half-precision conversion instructions.

    * dwarf2.c (read_section): Fix formatting.
        (read_n_bytes): Remove unhelpful comment.
        (read_indirect_string): Pass symbol table to read_section in case
        the .debug_str section needs relocating.

        PR 7037
        * elf32-cr16.c (cr16_elf_howto_table): Zero the src_mask field of
        the reloc descriptions.

* infcall.c (call_function_by_hand): Fix punctuation and capitalization
on error messages.

* gdb.mi/mi-syn-frame.exp: Update expected output.
* gdb.mi/mi2-syn-frame.exp: Update expected output.

*** empty log message ***

daily update

* configure.tgt [spu-*-elf*]: Set NATIVE_LIB_DIRS to '/lib'.

PR gdb/2250
* infrun.c (clear_proceed_status_thread): New function.
(clear_proceed_status_callback): New function.
(clear_proceed_status): In all-stop mode, clear per-thread
proceed status of *all* threads, not only the current.
(handle_inferior_event): In all-stop mode, if we're stepping
one thread, but got some inferior event in another thread
that does not cause GDB to break to the user interface,
ensure the interrupted stepping operation continues in the
original thread.
(currently_stepping): Move thread-related tests to ...
(currently_stepping_thread): ... this new function.
(currently_stepping_callback): New function.

Update copyright year in --version messages.

Implement =thread-selected notification.

        * mi/mi-common.h (struct mi_interp): New, moved from ...
        * mi/mi-interp.c: ...here.
        * mi/mi-main.c (mi_execute_command): If the thread changed
        as result of command, report that.

Implement continue/interrupt of thread groups.

        * mi/mi-main.c (proceed_thread_callback): New.
        (mi_cmd_exec_continue): If --thread-group is specified, resume all
        threads in that group.
        (interrupt_thread_callback): New.
        (mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
        all threads in that group.

Implement '-target-detach pid'.

        * infcmd.c (detach_command): Make nonstatic.
        * inferior.h (detach_command): Declare.
        * mi/mi-cmds.c (mi_cmds): Don't route -target-detach via CLI.
        * mi/mi-cmds.h (mi_cmd_target_detach): Declare.
        * mi/mi-main.c (find_thread_of_process, mi_cmd_target_detach): New.

Include group-id in thread-created notification.

        * mi/mi-interp.c (mi_new_thread, mi_thread_exit): Include
        group id in the output.

Notification for attach/detach.

        * inferior.c: Call the process observers.
        * mi/mi-interp.c (mi_new_inferior, mi_inferior_exit): New.
        (mi_interpreter_init): Register the above.

Implement -list-thread-groups.

        * thread.c (print_thread_info): New parameter pid, to print
        threads of specific process.
        * gdbthread.h (print_thread_info): New parameter pid.
        * mi/mi-cmds.c (mi_cmds): Register -list-thread-groups.
        * mi/mi-cmds.h (mi_cmd_list_thread_groups): New.
        * mi/mi-main.c (mi_cmd_thread_info): Adjust.
        (print_one_process, mi_cmd_list_thread_groups): New.

*** empty log message ***

daily update

    Remove some unused macros related to the old load/unload catchpoints.

        * breakpoint.c (SOLIB_LOADED_LIBRARY_PATHNAME)
        (SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_CREATE_CATCH_LOAD_HOOK)
        (SOLIB_CREATE_CATCH_UNLOAD_HOOK): Delete. No longer used.

    * gdb.base/help.exp: Remove the "catch load" and "catch unload"
        commands from the expected output for "help catch".

    Remove support for catch load and catch unload commands.

        * breakpoint.h (enum bptype): Remove bp_catch_load and bp_catch_unload.
        (struct breakpoint): Remove fields dll_pathname and
        triggered_dll_pathname.
        (bpstat_get_triggered_catchpoints, ep_is_shlib_catchpoint): Delete.
        * breakpoint.c (ep_is_catchpoint): Remove handling of
        bp_catch_load and bp_catch_unload.
        (print_it_typical, bpstat_check_location, bpstat_what)
        (print_one_breakpoint_location, print_one_breakpoint_location)
        (user_settable_breakpoint, allocate_bp_location)
        (set_raw_breakpoint_without_location, mention, delete_breakpoint,
        (breakpoint_re_set_one, disable_command, enable_command): Likewise.
        (ep_is_shlib_catchpoint, bpstat_get_triggered_catchpoints)
        (catch_load_command_1, catch_unload_command_1): Delete.
        (_initialize_breakpoint): Remove the "catch load" and "catch unload"
        command creation.
        * infrun.c (handle_inferior_event): Remove the handling of
        load/unload catchpoint events.

* dlltool.c (identify_search_section): Cast argument, not return
value, of xstrdup to 'char*'.

daily update

*** empty log message ***

    From  Jerome Guitton  <guitton@adacore.com>
        * dwarf2read.c (dwarf2_debug_line_missing_end_sequence_complaint):
        New function.
        (dwarf_decode_lines): Detect null file numbers. Detect the end of
        the line program sequence when no end sequence is emitted.

    * gdb.ada/int_deref.exp: New testcase.

* ada-lang.c (ada_evaluate_subexp): Improve handling of integer
type dereferencing.

Added --identify option to dlltool.

* NEWS: Mention sparc64-linux-gnu gdbserver support.

* reloc.cc (Sized_relobj::do_read_relocs): Use constant invalid_address
instead of -1U.

daily update

*** empty log message ***