Tom Tromey [Mon, 21 Jan 2013 17:29:39 +0000 (17:29 +0000)]
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
* minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
* NEWS: Update.
Jan Kratochvil [Mon, 21 Jan 2013 17:14:33 +0000 (17:14 +0000)]
gdb/
* symmisc.c (maintenance_print_msymbols): Check also ST_DEV.
Jan Kratochvil [Mon, 21 Jan 2013 16:46:12 +0000 (16:46 +0000)]
gdb/
Fix gdb.fortran/common-block.exp crash in PIE mode.
* dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
LOC_COMMON_BLOCK.
* f-valprint.c (info_common_command_for_block): Expect
LOC_COMMON_BLOCK in gdb_assert.
* symtab.h (struct general_symbol_info): Update comment for the
common_block member.
(domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
(enum address_class): New member LOC_COMMON_BLOCK.
Mike Frysinger [Mon, 21 Jan 2013 08:21:46 +0000 (08:21 +0000)]
ld: enable new dtags by default for linux/gnu targets
The "new" dtags options have been around for 14+ years now, so for Linux
and GNU targets, enable them by default.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Alan Modra [Mon, 21 Jan 2013 02:38:37 +0000 (02:38 +0000)]
* ld-size/size.exp (build_tests <size-7, size-8>): Pass
--no-as-needed in cflags.
gdbadmin [Mon, 21 Jan 2013 00:00:39 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 20 Jan 2013 23:00:07 +0000 (23:00 +0000)]
daily update
gdbadmin [Sun, 20 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sat, 19 Jan 2013 23:00:04 +0000 (23:00 +0000)]
daily update
H.J. Lu [Sat, 19 Jan 2013 19:36:37 +0000 (19:36 +0000)]
Add HOSTING_SCRT0 for PIE test
ld/
* Makefile.am (HOSTING_SCRT0): New.
* configure.host (HOSTING_SCRT0): New. Used for PIE.
* configure.in (HOSTING_SCRT0): New AC_SUBST.
* Makefile.in: Regenerated.
* configure: Likewise.
ld/testsuite/
* config/default.exp (get_target_emul): Also set HOSTING_SCRT0.
* lib/ld-lib.exp (default_ld_link): Use HOSTING_SCRT0 for -pie.
gdbadmin [Sat, 19 Jan 2013 00:00:04 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 18 Jan 2013 23:00:05 +0000 (23:00 +0000)]
daily update
H.J. Lu [Fri, 18 Jan 2013 22:50:30 +0000 (22:50 +0000)]
Resolve size relocation against non-zero TLS symbol
bfd/
* elf32-i386.c (elf_i386_allocate_dynrelocs): Clear pc_count for
non-zero TLS symbol.
(elf_i386_relocate_section): Resolve size relocation against
non-zero TLS symbol.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Clear pc_count
for non-zero TLS symbol.
(elf_x86_64_relocate_section): Resolve size relocation against
non-zero TLS symbol.
ld/testsuite/
* ld-size/size-10.rd: Updated.
* ld-size/size-8.rd: Likewise.
* ld-size/size32-2-i386.d: Likewise.
* ld-size/size32-2-x32.d: Likewise.
* ld-size/size32-2-x86-64.d: Likewise.
* ld-size/size64-2-x32.d: Likewise.
* ld-size/size64-2-x86-64.d: Likewise.
David Blaikie [Fri, 18 Jan 2013 21:42:58 +0000 (21:42 +0000)]
gdb
* ChangeLog: Fix errors in my previous commit: whitespace->tabs, date,
and trailing blank line. (from review by Sergio Durigan Junior)
David Blaikie [Fri, 18 Jan 2013 19:26:07 +0000 (19:26 +0000)]
gdb
* MAINTAINERS (Write After Approval): Add "David Blaikie".
David Blaikie [Fri, 18 Jan 2013 19:14:51 +0000 (19:14 +0000)]
gdb/testsuite
* gdb.base/label.c (main): Correct the type of the second
parameter.
Tom Tromey [Fri, 18 Jan 2013 18:32:35 +0000 (18:32 +0000)]
PR c++/14999:
* dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
Call require_rvalue.
gdb/testsuite
* gdb.dwarf2/trace-crash.s: New file.
* gdb.dwarf2/trace-crash.exp: New file.
Mike Frysinger [Fri, 18 Jan 2013 17:44:31 +0000 (17:44 +0000)]
gold: enable new dtags by default
The "new" dtags options have been around for 14+ years, and for all the
targets that gold supports, these flags have always existed. So enable
them by default.
Having behavior be different from ld.bfd isn't new, and this behavior
is the "better" one, so there shouldn't be a problem based on that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 18 Jan 2013 17:43:58 +0000 (17:43 +0000)]
ld: change --enable-new-dtags to only generate new dtags
The "new" dtags options have been around for 14+ years, so there
shouldn't be a need to generate both new & old tags anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
H.J. Lu [Fri, 18 Jan 2013 16:37:08 +0000 (16:37 +0000)]
Support size relocation only for ELF
* config/tc-i386.c (reloc): Support size relocation only for ELF.
(tc_i386_fix_adjustable): Likewise.
(lex_got): Likewise.
(tc_gen_reloc): Likewise.
Nick Clifton [Fri, 18 Jan 2013 13:14:35 +0000 (13:14 +0000)]
PR binutils/15026
* addr2line.c (translate_addresses): When pretty printing, print
unknown function names on the same line as unknown symbol names.
Hafiz Abid Qadeer [Fri, 18 Jan 2013 10:50:15 +0000 (10:50 +0000)]
2013-01-18 Hafiz Abid Qadeer<abidh@codesourcery.com>
PR gdb/13443
* gdb.base/checkpoint.exp: Update test messages to make them
unique.
Yao Qi [Fri, 18 Jan 2013 06:40:58 +0000 (06:40 +0000)]
gdb/gdbserver:
* ax.h (struct eval_agent_expr_context): New.
(gdb_eval_agent_expr): Update declaration.
* ax.c (gdb_eval_agent_expr): Remove argument REGCACHE and
TFRAME. Add new argument CTX.
* server.h (struct eval_agent_expr_context): Declare.
(agent_mem_read, agent_tsv_read): Update declaration.
(agent_mem_read_string): Likewise.
* tracepoint.c (eval_tracepoint_agent_expr): Remove.
(add_traceframe_block): Add new argument TPOINT.
Increase TPOINT->traceframe_usage.
(do_action_at_tracepoint): Call gdb_eval_agent_expr instead of
eval_tracepoint_agent_expr.
(condition_true_at_tracepoint): Likewise.
(agent_mem_read): Remove argument TFRAME. Add argument CTX.
(agent_mem_read_string, agent_tsv_read): Likewise.
Callers update.
gdb/testsuite:
* gdb.trace/infotrace.exp: Check 'traceframe usage' in the
output of 'info tracepoints'.
* gdb.trace/disconnected-tracing.exp (disconnected_tracing):
Likewise.
* gdb.trace/tstatus.exp (run_trace_experiment): Likewise.
* gdb.trace/disconnected-tracing.c (struct foo): New.
Yao Qi [Fri, 18 Jan 2013 03:09:42 +0000 (03:09 +0000)]
gdb/
* dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
(dbx_read_symtab): New declaration.
(dbx_psymtab_to_symtab): Delete.
(dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
Rename parameter PST to SELF. Exchanged two parameters.
(start_psymtab): Caller update.
* dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
(dwarf2_read_symtab): New declaration.
(dwarf2_psymtab_to_symtab): Delete.
(dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
Rename parameter PST to SELF. Exchanged two parameters.
(create_partial_symtab): Caller update.
* mdebugread.c (mdebug_psymtab_to_symtab): Delete.
(mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
Rename parameter PST to SELF. Exchanged two parameters.
(parse_partial_symbols, new_psymtab): Caller update.
* psympriv.h (struct partial_symtab) <read_symtab>: Exchange
two parameters.
* psymtab.c (psymtab_to_symtab): Caller update.
* xcoffread.c (xcoff_psymtab_to_symtab): Delete.
(xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
Rename parameter PST to SELF. Exchanged two parameters.
(xcoff_start_psymtab): Caller update.
Yao Qi [Fri, 18 Jan 2013 03:03:42 +0000 (03:03 +0000)]
gdb/
* infrun.c (proceed): Rename local variable 'oneproc' to
'force_step'.
H.J. Lu [Fri, 18 Jan 2013 00:21:52 +0000 (00:21 +0000)]
Verify run-time size relocations if supported
* ld-size/size-7.out: New file.
* ld-size/size-8.out: Likewise.
* ld-size/size-9.out: Likewise.
* ld-size/size-9.rd: Likewise.
* ld-size/size-9a.c: Likewise.
* ld-size/size-9b.c: Likewise.
* ld-size/size-10.out: Likewise.
* ld-size/size-10.rd: Likewise.
* ld-size/size-10a.c: Likewise.
* ld-size/size-10b.c: Likewise.
* ld-size/size.exp (build_tests): Build libsize-9.so and
libsize-10.so.
Run-time size relocation tests if supported.
(run_time_tests): New.
H.J. Lu [Fri, 18 Jan 2013 00:01:52 +0000 (00:01 +0000)]
Add size-1 and size-2 tests
* ld-size/size-1.c: New file.
* ld-size/size-1.out: Likewise.
* ld-size/size-1a.c: Likewise.
* ld-size/size-1b.c: Likewise.
* ld-size/size-2.c: Likewise.
* ld-size/size-2.out: Likewise.
* ld-size/size-2a.c: Likewise.
* ld-size/size-2b.c: Likewise.
* ld-size/size.exp (build_tests): Build libsize-1.so and
libsize-2.so.
(run_tests): Run size-1 and size-2.
gdbadmin [Fri, 18 Jan 2013 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Thu, 17 Jan 2013 23:39:05 +0000 (23:39 +0000)]
Add missing files
H.J. Lu [Thu, 17 Jan 2013 23:36:10 +0000 (23:36 +0000)]
Count size relocation as PC-relative relocation
bfd/
* elf32-i386.c (elf_i386_check_relocs): Count size relocation as
PC-relative relocation.
* elf64-x86-64.c (elf_x86_64_check_relocs): Count size relocation
as PC-relative relocation.
ld/testsuite/
* ld-size/size32-3-i386.d: New file.
* ld-size/size32-3-x32.d: Likewise.
* ld-size/size32-3-x86-64.d: Likewise.
* ld-size/size32-3.s: Likewise.
Alan Modra [Thu, 17 Jan 2013 23:29:14 +0000 (23:29 +0000)]
* powerpc.cc (Stub_table::find_plt_call_entry): Make types
used in declaration and definition consistent.
(Target_powerpc::symval_for_branch): Ditto.
Doug Evans [Thu, 17 Jan 2013 23:21:41 +0000 (23:21 +0000)]
* dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
(dw2_build_type_unit_groups): Delete. All uses updated.
Doug Evans [Thu, 17 Jan 2013 23:17:43 +0000 (23:17 +0000)]
* symtab.h (struct symbol_search): Add comment.
Alan Modra [Thu, 17 Jan 2013 23:00:06 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Thu, 17 Jan 2013 20:40:44 +0000 (20:40 +0000)]
gdb/
* symtab.c (compare_filenames_for_search): New comment for
HAS_DRIVE_SPEC.
gdb/testsuite/
* gdb.dwarf2/dw2-dos-drive.S: New file.
* gdb.dwarf2/dw2-dos-drive.exp: New file.
Tom Tromey [Thu, 17 Jan 2013 20:26:14 +0000 (20:26 +0000)]
* cp-abi.c (cp_abi_completer): Fix typo in assignment.
Doug Evans [Thu, 17 Jan 2013 20:17:15 +0000 (20:17 +0000)]
* boards/dwarf4-gdb-index.exp: Use any existing CC_FOR_TARGET,
CXX_FOR_TARGET.
Jan Kratochvil [Thu, 17 Jan 2013 19:55:18 +0000 (19:55 +0000)]
gdb/
* symtab.c (iterate_over_some_symtabs): New variable cleanups,
initialize it by existing make_cleanup. Call new do_cleanups.
Doug Evans [Thu, 17 Jan 2013 19:20:37 +0000 (19:20 +0000)]
* boards/cc-with-tweaks.exp: New file.
Tom Tromey [Thu, 17 Jan 2013 16:27:35 +0000 (16:27 +0000)]
* cp-abi.c (cp_abi_completer): New function.
(_initialize_cp_abi): Set completer for "set cp-abi".
gdb/testsuite
* gdb.base/completion.exp: Add "set cp-abi" completion test.
Yufeng Zhang [Thu, 17 Jan 2013 16:09:44 +0000 (16:09 +0000)]
include/opcode/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64.h (aarch64_op): Remove OP_V_MOVI_B.
opcodes/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* aarch64-asm.c (aarch64_ins_advsimd_imm_modified): Handle 8-bit MOVI.
* aarch64-dis.c (aarch64_ext_advsimd_imm_modified): Likewise.
* aarch64-opc.c (operand_general_constraint_met_p): For
AARCH64_MOD_LSL, move the range check on the shift amount before the
alignment check; change to call set_sft_amount_out_of_range_error
instead of set_imm_out_of_range_error.
* aarch64-tbl.h (QL_SIMD_IMM_B): Replace NIL with LSL.
(aarch64_opcode_table): Remove the OP enumerator from the asimdimm
8-bit MOVI entry; change the 2nd operand from SIMD_IMM to
SIMD_IMM_SFT.
gas/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* config/tc-aarch64.c (output_operand_error_record): Change to output
the out-of-range error message as value-expected message if there is
only one single value in the expected range.
(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
LSL #0 as a programmer-friendly feature.
gas/testsuite/
2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
* gas/aarch64/diagnostic.l: Update.
* gas/aarch64/movi.s: Add tests.
* gas/aarch64/movi.d: Update.
* gas/aarch64/programmer-friendly.s: Add comment.
Tom Tromey [Thu, 17 Jan 2013 15:23:38 +0000 (15:23 +0000)]
* mem-break.c: Remove obsolete comment.
* bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.
Pedro Alves [Thu, 17 Jan 2013 14:31:11 +0000 (14:31 +0000)]
Merge dg-extract-results.sh from gcc upstream (svn 195224).
gdb/testsuite/
2013-01-17 Pedro Alves <palves@redhat.com>
Merge dg-extract-results.sh from upstream (svn 195224).
2013-01-15 David Blaikie <dblaikie@gmail.com>
* dg-extract-results.sh: Fix order of summary counts.
2013-01-15 David Blaikie <dblaikie@gmail.com>
* dg-extract-results.sh: Constrain the start-of-log pattern.
2013-01-15 David Blaikie <dblaikie@gmail.com>
* dg-extract-results.sh: Handle KPASSes.
2010-05-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* dg-extract-results.sh: Redirect grep output to /dev/null instead
of grep -q.
Sanjoy Das [Thu, 17 Jan 2013 14:21:46 +0000 (14:21 +0000)]
gdb/testsuite
* gdb.base/jit-reader.exp: New file. Test case for the jit-reader
interface.
* gdb.base/jithost.c: New file.
* gdb.base/jithost.h: New file.
* gdb.base/jitreader.c : New file.
* gdb.base/jit-protocol.h: New file.
Sanjoy Das [Thu, 17 Jan 2013 14:17:16 +0000 (14:17 +0000)]
* jit.c (jit_reader_load_command): Interpret the jit reader name as an
absolute path if it begins with a forward slash.
Sanjoy Das [Thu, 17 Jan 2013 14:11:27 +0000 (14:11 +0000)]
PR gdb/14550
* jit.c (finalize_symtab): Ensure that only the global block has a
NULL superblock.
Pedro Alves [Thu, 17 Jan 2013 11:06:26 +0000 (11:06 +0000)]
2013-01-17 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include ../config/plugins.m4,
../config/largefile.m4 and ../config/lead-dot.m4. Add comments.
* Makefile.in (aclocal_m4_deps): Update.
* aclocal.m4: Renegerate.
Anthony Green [Thu, 17 Jan 2013 09:44:53 +0000 (09:44 +0000)]
Remove debug output
H.J. Lu [Thu, 17 Jan 2013 04:28:48 +0000 (04:28 +0000)]
Add x86 size relocation support to gas
gas/
* config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
(tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
BFD_RELOC_64_SIZE relocations.
(lex_got): Support "symbol@SIZE" and don't create GOT symbol
for it.
(tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
relocations against local symbols.
gas/testsuite/
* gas/i386/i386.exp: Run size-1, size-2, size-3, size-4,
x86-64-size-1, x86-64-size-2, x86-64-size-3, x86-64-size-4,
x86-64-size-5 and x86-64-size-inval-1.
* gas/i386/size-1.d: New file.
* gas/i386/size-1.s: Likewise.
* gas/i386/size-2.d: Likewise.
* gas/i386/size-2.s: Likewise.
* gas/i386/size-3.d: Likewise.
* gas/i386/size-3.s: Likewise.
* gas/i386/size-4.d: Likewise.
* gas/i386/size-4.s: Likewise.
* gas/i386/x86-64-size-1.d: Likewise.
* gas/i386/x86-64-size-2.d: Likewise.
* gas/i386/x86-64-size-3.d: Likewise.
* gas/i386/x86-64-size-4.d: Likewise.
* gas/i386/x86-64-size-5.d: Likewise.
* gas/i386/x86-64-size-5.s: Likewise.
* gas/i386/x86-64-size-inval-1.l: Likewise.
* gas/i386/x86-64-size-inval-1.s: Likewise.
* gas/i386/ilp32/x86-64-size-1.d: Likewise.
* gas/i386/ilp32/x86-64-size-2.d: Likewise.
* gas/i386/ilp32/x86-64-size-3.d: Likewise.
* gas/i386/ilp32/x86-64-size-4.d: Likewise.
* gas/i386/ilp32/x86-64-size-5.d: Likewise.
ld/testsuite/
* ld-size/size.exp: New file.
* ld-size/size32-1-i386.d: Likewise.
* ld-size/size32-1-x32.d: Likewise.
* ld-size/size32-1-x86-64.d: Likewise.
* ld-size/size32-1.s: Likewise.
* ld-size/size32-2-i386.d: Likewise.
* ld-size/size32-2-x32.d: Likewise.
* ld-size/size32-2-x86-64.d: Likewise.
* ld-size/size32-2.s: Likewise.
* ld-size/size64-1-x32.d: Likewise.
* ld-size/size64-1-x86-64.d: Likewise.
* ld-size/size64-1.s: Likewise.
* ld-size/size64-2-x32.d: Likewise.
* ld-size/size64-2-x86-64.d: Likewise.
* ld-size/size64-2.s: Likewise.
* ld-size/size-3.c: Likewise.
* ld-size/size-3.out: Likewise.
* ld-size/size-3a.c: Likewise.
* ld-size/size-3b.c: Likewise.
* ld-size/size-3c.c: Likewise.
* ld-size/size-4.out: Likewise.
* ld-size/size-4a.c: Likewise.
* ld-size/size-4b.c: Likewise.
* ld-size/size-5.out: Likewise.
* ld-size/size-5a.c: Likewise.
* ld-size/size-5b.c: Likewise.
* ld-size/size-6.out: Likewise.
* ld-size/size-6a.c: Likewise.
* ld-size/size-6b.c: Likewise.
* ld-size/size-7.rd: Likewise.
* ld-size/size-7a.c: Likewise.
* ld-size/size-7b.c: Likewise.
* ld-size/size-8.rd: Likewise.
* ld-size/size-8a.c: Likewise.
* ld-size/size-8b.c: Likewise.
Alan Modra [Thu, 17 Jan 2013 02:24:47 +0000 (02:24 +0000)]
* objdump.c (dump_target_specific): Fix NULL pointer test.
Sriraman Tallam [Thu, 17 Jan 2013 00:00:48 +0000 (00:00 +0000)]
2013-01-16 Sriraman Tallam <tmsriram@google.com>
* testsuite/plugin_final_layout.cc: Fix comment.
gdbadmin [Thu, 17 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 16 Jan 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Sriraman Tallam [Wed, 16 Jan 2013 22:47:14 +0000 (22:47 +0000)]
2013-01-16 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::layout): Do not do default sorting for
text sections when section ordering is specified.
(make_output_section): Ditto.
* testsuite/plugin_final_layout.cc: Name the function sections
to catch reordering issues.
H.J. Lu [Wed, 16 Jan 2013 22:41:03 +0000 (22:41 +0000)]
Update x86 size relocation check
* elf32-i386.c (elf_i386_check_relocs): Update R_386_SIZE32
check.
(elf_i386_relocate_section): Don't check TLS for R_386_SIZE32.
* elf64-x86-64.c (elf_x86_64_check_relocs): Update R_X86_64_SIZE32
and R_X86_64_SIZE64 check.
(elf_x86_64_relocate_section): Don't check TLS for R_X86_64_SIZE32
nor R_X86_64_SIZE64.
H.J. Lu [Wed, 16 Jan 2013 22:11:05 +0000 (22:11 +0000)]
Add OPERAND_TYPE_IMM32_64
* i386-gen.c (operand_type_init): Add OPERAND_TYPE_IMM32_64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
Doug Evans [Wed, 16 Jan 2013 22:02:16 +0000 (22:02 +0000)]
* contrib/cc-with-tweaks.sh: Add references to Fission docs.
H.J. Lu [Wed, 16 Jan 2013 21:34:46 +0000 (21:34 +0000)]
Add x86 size relocation support to bfd
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
* elf32-i386.c (elf_howto_table): Fill R_386_SIZE32 entry.
(elf_i386_reloc_type_lookup): Support BFD_RELOC_SIZE32.
(elf_i386_check_relocs): Handle R_386_SIZE32.
(elf_i386_gc_sweep_hook): Likewise.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Fill R_X86_64_SIZE32
and R_X86_64_SIZE64 entries.
(x86_64_reloc_map): Add BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64,
(elf_x86_64_rtype_to_howto): Handle R_X86_64_SIZE32 for x32.
(elf_x86_64_reloc_name_lookup): Likewise.
(elf_x86_64_check_relocs): Handle R_X86_64_SIZE32 and
R_X86_64_SIZE64.
(elf_x86_64_gc_sweep_hook): Likewise.
(elf_x86_64_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_SIZE32 and
BFD_RELOC_SIZE64.
H.J. Lu [Wed, 16 Jan 2013 20:31:57 +0000 (20:31 +0000)]
Define R_386_SIZE32/R_X86_64_SIZE32/R_X86_64_SIZE64
* i386.h (R_386_SIZE32): Fill it.
* x86-64.h (R_X86_64_SIZE32): Likewise.
(R_X86_64_SIZE64): Likewise.
Tom Tromey [Wed, 16 Jan 2013 17:31:40 +0000 (17:31 +0000)]
2013-01-03 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
PR cli/7221:
* NEWS: Add "catch signal".
* breakpoint.c (base_breakpoint_ops): No longer static.
(bpstat_explains_signal): New function.
(init_catchpoint): No longer static.
(base_breakpoint_explains_signal): New function.
(base_breakpoint_ops): Initialize new field.
* breakpoint.h (enum bpstat_signal_value): New.
(struct breakpoint_ops) <explains_signal>: New field.
(bpstat_explains_signal): Remove macro, declare as function.
(base_breakpoint_ops, init_catchpoint): Declare.
* break-catch-sig.c: New file.
* inferior.h (signal_catch_update): Declare.
* infrun.c (signal_catch): New global.
(handle_syscall_event): Update for change to
bpstat_explains_signal.
(handle_inferior_event): Likewise. Always handle random signals
via bpstats.
(signal_cache_update): Check signal_catch.
(signal_catch_update): New function.
(_initialize_infrun): Initialize signal_catch.
* Makefile.in (SFILES): Add break-catch-sig.c.
(COMMON_OBS): Add break-catch-sig.o.
gdb/doc
* gdb.texinfo (Set Catchpoints): Document "catch signal".
(Signals): Likewise.
gdb/testsuite
* gdb.base/catch-signal.c: New file.
* gdb.base/catch-signal.exp: New file.
Tom Tromey [Wed, 16 Jan 2013 17:27:53 +0000 (17:27 +0000)]
* breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
(print_one_catch_solib, print_one_catch_syscall)
(print_one_catch_exec, print_one_exception_catchpoint): Emit
"catch-type".
gdb/doc
* gdb.texinfo (GDB/MI Breakpoint Information): Document
"catch-type" field.
(GDB/MI Catchpoint Commands): Add "catch-type" to examples.
gdb/testsuite
* gdb.mi/mi-catch-load.exp: Look for "catch-type".
Yao Qi [Wed, 16 Jan 2013 14:53:24 +0000 (14:53 +0000)]
gdb/
* printcmd.c (current_display_number): Make it static.
Yao Qi [Wed, 16 Jan 2013 14:46:17 +0000 (14:46 +0000)]
gdb/gdbserver/
* linux-low.c (linux_resume_one_lwp): Don't check
'lwp->bp_reinsert != 0'.
Yao Qi [Wed, 16 Jan 2013 14:44:03 +0000 (14:44 +0000)]
gdb/
* infcmd.c (step_once): Don't check '!single_inst' as it was
checked before.
Nick Clifton [Wed, 16 Jan 2013 10:45:22 +0000 (10:45 +0000)]
* rx.c (decode_opcode): Handle RXO_satr.
Alan Modra [Wed, 16 Jan 2013 08:14:35 +0000 (08:14 +0000)]
* ld-plugin/lto.exp (lto-9.o, pr13229.o): Pass -finline.
Alan Modra [Wed, 16 Jan 2013 06:13:13 +0000 (06:13 +0000)]
* gas/ppc/htm.d: Ignore padding at end of section.
Alan Modra [Wed, 16 Jan 2013 06:12:46 +0000 (06:12 +0000)]
* config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
finding some sort of toc syntax error, and break to avoid
compiler uninit warning.
gdbadmin [Wed, 16 Jan 2013 00:00:41 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 15 Jan 2013 23:00:04 +0000 (23:00 +0000)]
daily update
Jan-Benedict Glaw [Tue, 15 Jan 2013 21:47:02 +0000 (21:47 +0000)]
* configure.ac: Sync with GCC repo.
* configure: Ditto.
* Makefile.def: Ditto.
* Makefile.in: Ditto.
Jan Kratochvil [Tue, 15 Jan 2013 21:32:36 +0000 (21:32 +0000)]
gdb/
* dwarf2read.c (psymtab_include_file_name): Extend the function comment.
H.J. Lu [Tue, 15 Jan 2013 20:34:11 +0000 (20:34 +0000)]
Increment length by 1 if the relocation token is removed
gas/
PR gas/15019
* config/tc-i386.c (lex_got): Increment length by 1 if the
relocation token is removed.
gas/testsuite/
PR gas/15019
* gas/i386/reloc32.s: Add tests for "xtrn@got -/+ 4".
* gas/i386/reloc64.s: Likewise.
* gas/i386/ilp32/reloc64.s: Likewise.
* gas/i386/reloc32.d: Updated.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/reloc64.d: Likewise.
H.J. Lu [Tue, 15 Jan 2013 17:30:49 +0000 (17:30 +0000)]
Define R_X86_64_standard with R_X86_64_RELATIVE64
* elf64-x86-64.c (R_X86_64_standard): Replace R_X86_64_IRELATIVE
with R_X86_64_RELATIVE64.
Jan Kratochvil [Tue, 15 Jan 2013 15:11:09 +0000 (15:11 +0000)]
gdb/testsuite/
* gdb.dwarf2/dw2-restrict.exp: Skip compilation on non-x86_64 targets.
Alan Modra [Tue, 15 Jan 2013 13:41:05 +0000 (13:41 +0000)]
PR binutils/15018
* stabs.c (parse_stab_members): Always set physname here to avoid
gcc warning..
(parse_stab_argtypes): ..and don't duplicate the init here.
Nick Clifton [Tue, 15 Jan 2013 08:45:45 +0000 (08:45 +0000)]
* config/tc-v850.c (md_assemble): Allow signed values for
V850E_IMMEDIATE.
* gas/v850/basic.exp: Allow for variations in reloc names.
* gas/v850/split-lo16.d: Likewise.
* gas/v850/v850e1.s: Add more tests of the PREPARE insn.
* gas/v850/v850e1.d: Update expected disassembly.
* v850-dis.c (get_operand_value): Sign extend V850E_IMMEDIATE
values.
* v850-opc.c (IMM16LO): Add V850_OPERAND_SIGNED attribute.
Nick Clifton [Tue, 15 Jan 2013 08:35:39 +0000 (08:35 +0000)]
Fix spelling typo.
Alan Modra [Tue, 15 Jan 2013 06:13:26 +0000 (06:13 +0000)]
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Default shared libs to
plt-thread-safe.
gold/
* powerpc.cc (Target_powerpc::do_relax): Default shared libs to
plt-thread-safe.
ld/testsuite/
* ld-powerpc/tlsso.d: Adjust for plt-thread-safe stubs.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
Alan Modra [Tue, 15 Jan 2013 05:05:26 +0000 (05:05 +0000)]
* ld-plugin/lto-16a.d: Match powerpc64 function symbol type.
* ld-plugin/lto-16b.d: Likewise.
* ld-plugin/lto-17a.d: Likewise.
* ld-plugin/lto-17b-2.d: Likewise.
gdbadmin [Tue, 15 Jan 2013 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 14 Jan 2013 23:11:56 +0000 (23:11 +0000)]
* testsuite/Makefile.am (final_layout_script.lds): Handle .got section.
* testsuite/Makefile.in: Regenerate.
Alan Modra [Mon, 14 Jan 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Tom Tromey [Mon, 14 Jan 2013 21:05:07 +0000 (21:05 +0000)]
* cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
set command.
* command.h (add_setshow_string_noescape_cmd): Update.
* corefile.c (set_gnutarget_command): Remove trailing whitespace.
(complete_set_gnutarget): New function.
(_initialize_core): Set the "set gnutarget" completer.
gdb/testsuite
* gdb.base/completion.exp: Add "set gnutarget" test.
Tom Tromey [Mon, 14 Jan 2013 20:59:27 +0000 (20:59 +0000)]
PR symtab/14442:
* c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
(c_type_print_modifier): Likewise.
* dwarf2read.c (read_tag_restrict_type): New function.
(read_type_die_1): Handle DW_TAG_restrict_type.
* gdbtypes.c (make_restrict_type): New function.
(recursive_dump_type): Handle TYPE_RESTRICT.
* gdbtypes.h (enum type_flag_values): Renumber.
(enum type_instance_flag_value): Add
TYPE_INSTANCE_FLAG_RESTRICT.
(TYPE_RESTRICT): New macro.
(make_restrict_type): Declare.
gdb/testsuite
* gdb.dwarf2/dw2-restrict.S: New file.
* gdb.dwarf2/dw2-restrict.c: New file.
* gdb.dwarf2/dw2-restrict.exp: New file.
Tom Tromey [Mon, 14 Jan 2013 20:51:48 +0000 (20:51 +0000)]
PR symtab/14931:
* psymtab.c (struct psymtab_state): New.
(discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
functions.
* psympriv.h (make_cleanup_discard_psymtabs): Declare.
* dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.
gdb/testsuite
* gdb.dwarf2/dw2-error.exp: New file.
* gdb.dwarf2/dw2-error.c: New file.
* gdb.dwarf2/dw2-error.S: New file.
Pedro Alves [Mon, 14 Jan 2013 18:06:21 +0000 (18:06 +0000)]
2013-01-14 Richard Sharman <richard_sharman@mitel.com>
Pedro Alves <palves@redhat.com>
PR remote/14786
* remote.c (remote_threads_info): Make a copy of the reply from
qfThreadInfo and use that instead of rs->buf.
Alan Modra [Mon, 14 Jan 2013 13:37:10 +0000 (13:37 +0000)]
* ld.texinfo (-Tldata-segment): Describe.
* ldlex.h (OPTION_TLDATA_SEGMENT): New enum value.
* lexsup.c (ld_options): Add -Tldata-segment.
(parse_args): Handle OPTION_TLDATA_SEGMENT.
* scripttempl/elf.sc: Support LARGE_DATA_ADDR.
Alan Modra [Mon, 14 Jan 2013 13:23:05 +0000 (13:23 +0000)]
* ld-elf/pr14926.d: Disable for d10v, msp, xstormy.
* ld-elf/sec-to-seg.exp: Choose correct variant output to suit
updated microblaze page size.
Alan Modra [Mon, 14 Jan 2013 13:14:08 +0000 (13:14 +0000)]
PR binutils/14813
* bfdio.c (struct bfd_iovec <bclose>): Revert 2012-11-06.
(memory_bclose): Likewise. Return 0 on success.
* cache.c (cache_bclose): Likewise.
* opncls.c (opncls_bclose, bfd_close): Likewise.
* vms-lib.c (vms_lib_bclose): Likewise.
* libbfd.h: Regenerate.
Alan Modra [Mon, 14 Jan 2013 13:11:31 +0000 (13:11 +0000)]
* gas/v850/basic.exp (reloc part 1): Pass -mgcc-abi to gas.
* gas/v850/split-lo16.d: Likewise.
Alan Modra [Mon, 14 Jan 2013 12:56:39 +0000 (12:56 +0000)]
* testsuite/Makefile.am (MOSTLYCLEANFILES): Add various output files.
* testsuite/Makefile.in: Regenerate.
Nick Clifton [Mon, 14 Jan 2013 11:22:06 +0000 (11:22 +0000)]
* metag-dis.c (REG_WIDTH): Increase to 64.
* gas/metag/metadsp21.d: Fix expected MMOV disassembly.
Yao Qi [Mon, 14 Jan 2013 10:39:33 +0000 (10:39 +0000)]
gdb/
2013-01-14 Yao Qi <yao@codesourcery.com>
* dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
(dbx_psymtab_to_symtab): Likewise.
* dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
* mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.
Alan Modra [Mon, 14 Jan 2013 06:42:00 +0000 (06:42 +0000)]
* gas/ppc/htm.s: Use .text rather than .section ".text".
* gas/ppc/power8.s: Likewise.
* gas/ppc/htm.d: Don't match file format.
* gas/ppc/power8.d: Likewise.
gdbadmin [Mon, 14 Jan 2013 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 13 Jan 2013 23:00:05 +0000 (23:00 +0000)]
daily update
Jan Kratochvil [Sun, 13 Jan 2013 18:57:01 +0000 (18:57 +0000)]
gdb/
* parse.c (parse_exp_in_context): New variable inner_chain. Call
make_cleanup_restore_current_language. Call set_language. Move
OLD_CHAIN and INNER_CHAIN cleanups.
* utils.c (do_restore_current_language)
(make_cleanup_restore_current_language): New functions.
* utils.h (make_cleanup_restore_current_language): New declaration.
gdb/testsuite/
* gdb.cp/parse-lang.cc: New file.
* gdb.cp/parse-lang.exp: New file.
Jan Kratochvil [Sun, 13 Jan 2013 18:53:51 +0000 (18:53 +0000)]
gdb/
* source.c (symtab_to_fullname): Do not prepend DIRNAME for
non-existing files if FILENAME is already absolute.
Jan Kratochvil [Sun, 13 Jan 2013 18:52:45 +0000 (18:52 +0000)]
gdb/
* source.c (symtab_to_fullname): Apply rewrite_source_path also for
non-existing files.
gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: Set srcfileabssubst and initdir.
(set substitute-path): New test.
(fullname present): Remove content.
(substituted fullname): New test.
projects / binutils-gdb.git / log