Alvaro G. M [Tue, 8 Jul 2014 10:21:32 +0000 (12:21 +0200)]
dcron: new package
[Thomas: wrap help text, add BR2_USE_MMU dependency, minor fixes in
.mk file.]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Henry Margies [Wed, 9 Jul 2014 10:38:59 +0000 (11:38 +0100)]
python, python3: build with tzset support
This patch adds support for time.tzset() in Python 2.7 and Python 3.
The Python configure script sets ac_cv_working_tzset to 'no' when
cross compiling, although it should be available and work with all
toolchains supported by Buildroot (?).
The patch below pre-sets the variable so that time.tzset() works.
[Thomas: adjust commit log.]
Signed-off-by: Henry Margies <henry.margies@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
David Bachelart [Thu, 10 Jul 2014 12:00:26 +0000 (14:00 +0200)]
bzip2: install shared library for the host
libbz2.so was explicitly built for the host, but was not installed. Install it.
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Philippe Proulx [Mon, 14 Jul 2014 02:35:17 +0000 (22:35 -0400)]
python-pyzmq: enable PyZMQ for Python 3
The PyZMQ package is currently limited to Python 2; however, its
build system does not require the Python 2 interpreter and will work
as is with Python 3 (tested).
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 1 Jul 2014 17:39:16 +0000 (19:39 +0200)]
grub2: fix a few minor issues in help text
The help text of grub2 explains the detailed steps to create a disk
image with grub2 installed on it. However, the steps for the
BIOS-based systems have a few minor issues fixed by this patch:
- When calling partx to get the partitions detected, we should do it
on the /dev/loop0 block device, and not on the underlying disk.img
image file.
- The grub-bios-setup utility must be called as root to work properly
on /dev/loop0.
- The steps to cleanup the partx and loop device were missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 11 Jul 2014 17:55:44 +0000 (19:55 +0200)]
binutils: remove 2.21.1
After the following commits:
26974bf6a7c94c0c44722fe072182cfcc49bdb6e use default binutils for sh architecture
6f1cf344d90ea3eabf292b04d993a7be2a785dd6 binutils: Use the default version by default on MIPS
the 2.21.1 binutils version is no longer required, and since it's an
old version, we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 11 Jul 2014 17:55:43 +0000 (19:55 +0200)]
binutils: remove leftover version definitions
Following
d4839ffcab70f2496673e5b376f4c0d492260396 ("binutils: remove
2.20.1, 2.21 and 2.23.1"), Config.in.host contains unneeded
definitions of BR2_BINUTILS_VERSION for no longer existing
versions. This patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Tue, 15 Jul 2014 17:35:01 +0000 (19:35 +0200)]
perl-net-ssleay: add comment to new hook
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Mon, 14 Jul 2014 11:50:27 +0000 (13:50 +0200)]
uclibc: replace custom kconfig helpers with those provided by pkg-utils
This patch removes the custom kconfig helpers UCLIBC_OPT_SET and
UCLIBC_OPT_UNSET with the common KCONFIG_SET_OPT, KCONFIG_ENABLE_OPT and
KCONFIG_DISABLE_OPT.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Mon, 14 Jul 2014 11:50:26 +0000 (13:50 +0200)]
pkg-utils: kconfig helpers: use single iso double quoting
The echo statements in the kconfig helpers are currently using double
quotes. For KCONFIG_SET_OPT this is problematic when the value argument
itself contains a double quote (a string value). In this case, the statement
echo "$(1)=$(2)" >> $(3)
would become:
echo "FOO="string value"" >> /some/path/.config
resulting in the string
FOO=string value
in the config file, rather than the properly quoted
FOO="string value"
The linux package worked around this by escaping the quote characters, but
a prettier solution is to use single quoting in the helpers (or
alternatively use no quoting at all).
A side effect of this change is that a $variable in the key or value would
no longer be interpreted by the shell, removing any unexpected behavior.
This change is only really necessary for KCONFIG_SET_OPT, but for symmetry
reasons the other helpers are updated too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Mon, 14 Jul 2014 11:50:25 +0000 (13:50 +0200)]
pkg-utils: kconfig helpers: add basic usage documentation
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 12 Jul 2014 12:11:52 +0000 (14:11 +0200)]
package/python: fix sqlite3 extension without threads
Fix a compiler error when building the sqlite3 extension, when the
toolchain does not have threads.
Fixes:
http://autobuild.buildroot.net/results/10f/
10f268cd55f16ee53f4c5e17e1248b0a1820f6ea/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Mon, 14 Jul 2014 23:48:04 +0000 (01:48 +0200)]
perl-net-ssleay: fix configure
When TARGET_LDFLAGS contains more than one option, the generated
Makefile contains this definition of LDDLFLAGS:
LDDLFLAGS = '--option-1 --option-2'
Which when passed to gcc is interpreted as a single option, and gcc
(rightfully) barfs on it, like with:
arm-linux-gnueabihf-gcc: error: unrecognized command line
option ‘-shared -g’
This is because perl-net-ssleay's buildsystem is really completely
brain-damaged. Other perl extensions do not behave like that, and
instead are doing the only sane thing to do: not add single quotes
around the definition, and just use what they were provided for
LDDLFLAGS.
So, just do the same for perl-net-ssleay. Since tweaking (yet once
more) their buildsystem is too complex, we just use a post-configure
hook to fix up the mess, by removing single quotes around the definition
of LDDLFLAGS.
Note: if only one option is specified, no single quotes are added,
but our hook is a no-op in this case.
See also:
http://lists.busybox.net/pipermail/buildroot/2014-July/101782.html
and the previous message for even more entertainment. ;-)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: find the real cause of the issue, tweak the sed expression to not
force -shared and instead just trim the single quotes, enhance commit
log]
[Thomas: fix minor typos in the commit log, add comment above hook
definition]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Tue, 15 Jul 2014 15:52:39 +0000 (12:52 -0300)]
polarssl: programs need MMU
Fixes:
http://autobuild.buildroot.net/results/b53/
b535dfda85c8a25c5192c4be7540c4e852fce717/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 12 Jul 2014 17:41:41 +0000 (14:41 -0300)]
nano: bump to version 2.3.5
Switch to the full-blown install when tiny is not selected, we really
want all of it in that case.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Arnout Vandecappelle [Mon, 14 Jul 2014 06:41:02 +0000 (08:41 +0200)]
nasm: remove unused target package
When nasm was added in
da8d09b716, it got both the host and the target
variants even though it doesn't have a Config.in and the target variant isn't
used anywhere. Therefore, this patch removes the unused target variant.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 13 Jul 2014 13:03:24 +0000 (15:03 +0200)]
package/perl-xml-libxml: not available for static link
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-xml-libxml is written in C, so it is not available when doing a
static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sun, 13 Jul 2014 13:03:23 +0000 (15:03 +0200)]
package/perl-net-ssleay: not available for static link
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-net-ssleay is (partly) written in C, so it is not available when
doing a static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sun, 13 Jul 2014 13:03:22 +0000 (15:03 +0200)]
package/perl-net-ssleay: fix buildsystem for cross-compilation
The buildsystem for perl-net-ssleay is totally brain-damaged: it tries
to execute the openssl program. It uses that to check the openssl
version, detect the prefix to openssl, and set the include and library
search paths.
Of course, it does not handle the destdir idiom, so it ends up finding
the host system's openssl (not even ours!), so it sets search paths to
/usr/inlcude and /usr/lib and /lib.
Well, guess what? It does not work.
Fix that by:
- passing the prefix to openssl in the environment, so it does not go
hunting for the host-system openssl;
- not checking the version string, since we can't run, and Buildroot
has the correct version anyway;
- not setting any -I or -L paths since our compiler/linker already
know where to look for for includes and libs.
Fixes:
http://autobuild.buildroot.net/results/135/
135867ef85535863e3647cc5fb82accb6f77612c/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: enhance commit log, add patch to avoid running openssl and setting
wrong include and library search paths]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Sun, 13 Jul 2014 13:03:21 +0000 (15:03 +0200)]
infra/pkg-perl: add possibility to pass extra env at configure time
Some perl packages may use environment variables as a hint to know how
to be configured.
That's for example the case for perl-net-ssleay that uses
OPENSSL_PREFIX, if it is set in the environment, as the prefix to
openssl.
Add a new variable that packages can set if they need extra environment
variables. Update the manual accordingly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: enhance the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas De Schampheleire [Sat, 12 Jul 2014 19:21:16 +0000 (21:21 +0200)]
busybox: fix typo 'overwritting'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 10 Jul 2014 20:10:32 +0000 (17:10 -0300)]
ncmpc: bump to version 0.23
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 12 Jul 2014 13:08:01 +0000 (10:08 -0300)]
libgpgme: disable all tests
Disable all of the tests, including runtime that needs gnupg.
There's no longer --without configure options for them, it's now
--disable. Fixes:
http://autobuild.buildroot.net/results/eb1/
eb1e06b1d99c441b6086c07ee04b084a61041dc7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Max Filippov [Thu, 10 Jul 2014 16:25:13 +0000 (20:25 +0400)]
binutils: fix xtensa ld segfault on linking linux modules
This fixes the following build error reproducible with any linux kernel
module built with a recent buildroot toolchain:
LD [M] fs/jbd2/jbd2.ko
/bin/sh: line 1: 12069 Segmentation fault
buildroot/host/usr/bin/xtensa-buildroot-linux-uclibc-ld -r --no-relax
-T linux/scripts/module-common.lds --build-id
-o fs/jbd2/jbd2.ko fs/jbd2/jbd2.o fs/jbd2/jbd2.mod.o
Backported from:
e7d17e71cdc10a2e81e454ce3b9637f1b2a587f2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 10 Jul 2014 19:57:44 +0000 (16:57 -0300)]
gd: switch to new homepage
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 12 Jul 2014 11:40:48 +0000 (08:40 -0300)]
gettext: bump to version 0.19.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 12 Jul 2014 11:36:20 +0000 (08:36 -0300)]
linux-headers: bump 3.2.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas Petazzoni [Fri, 11 Jul 2014 18:04:18 +0000 (20:04 +0200)]
busybox: fix interaction with version selection removal and lzo fix
The fix for the LZO issue in Busybox was merged between the moment the
patch removing the Busybox version selection was posted and
merged. This patch adjusts the Busybox patches to take into account
this issue: it removes the LZO patches for the no-longer existing
Busybox versions, and moves the LZO fix for the 1.22.1 Busybox version
as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Gustavo Zacarias [Fri, 11 Jul 2014 16:37:06 +0000 (13:37 -0300)]
cifs-utils: bump to version 6.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 11 Jul 2014 13:37:18 +0000 (10:37 -0300)]
flashrom: bump to version 0.9.7
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 11 Jul 2014 19:36:24 +0000 (16:36 -0300)]
libgpgme: bump to version 1.5.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 11 Jul 2014 19:36:23 +0000 (16:36 -0300)]
libgcrypt: bump to version 1.6.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 11 Jul 2014 21:06:28 +0000 (18:06 -0300)]
polarssl: security bump to version 1.2.11
Fixes CVE-2014-4911 and a few other issues that don't have a CVE assigned
(backports from 1.3.x branch).
The no programs & shared/static patches are now upstream albeit in a
slightly different form.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Fri, 11 Jul 2014 16:36:32 +0000 (13:36 -0300)]
e2fsprogs: bump to version 1.42.11
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Thu, 10 Jul 2014 20:05:55 +0000 (22:05 +0200)]
arch: avr32 should only get removed for the 2015.02 release
As discussed on the list.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hadrien Boutteville [Thu, 10 Jul 2014 12:45:24 +0000 (14:45 +0200)]
qt5base: fix typo
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 10 Jul 2014 12:40:37 +0000 (09:40 -0300)]
inadyn: not available for static
inadyn isn't static-build friendly, even if we pull in the libz link
line for the failure stated below it'll fail when trying to link to
libdl and using dlopen for the plugins. Fixes:
http://autobuild.buildroot.net/results/1a1/
1a1a184e8248e5c51fa730d0c9721fe67a9c84a4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 10 Jul 2014 13:59:23 +0000 (10:59 -0300)]
atftp: fix static linking
Readline uses ncurses hence pull it in, also needs to explicitly link
against libpthread. Fixes:
http://autobuild.buildroot.net/results/259/
2592612be38a2c1dde21b44be2ecf25d1cc5211a/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:00 +0000 (20:03 +0200)]
arch: deprecate the AVR32 architecture
The AVR32 architecture from Atmel is obsolete since a long time, not
supported upstream in most of the toolchain components (requires a
special version of gcc, an old version of uClibc, etc.). Until
February, Simon Dawson was making an excellent job at maintaining
AVR32 in Buildroot, and fixing all the issues caused by this
architecture. However, Simon focus has changed, and despite his call
for a new maintainer for AVR32 in Buildroot, nobody stepped up.
The issue of maintaining AVR32 is becoming worse and worse, so this
patch proposes to deprecate it for 2014.08, but keeping the support
around, to remove it for sure in 2014.11.
Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:09 +0000 (20:03 +0200)]
busybox: support only one version
This commit removes the version selection for the busybox
package. Busybox is very well maintained, and bugs are typically fixed
in a timely fashion. Moreover, regressions are fairly unlikely in this
very stable and well-tested tool.
Therefore, there isn't a very compelling reason to have a version
selection for Busybox since we don't accept such a version selection
for the vast majority of other packages, unless there is a strong
reason to do so.
Consequently, this commit:
* Removes the 1.19.4, 1.20.2 and 1.21.1 Busybox versions, patches and
default configuration file.
* Moves the 1.22.1 patches from package/busybox/1.22.1 to just
package/busybox/ like all other packages.
* Renames the default 1.22.1 configuration file to just
busybox.config.
* Adapts the busybox.mk makefile to encode the current version to
use.
* Adds appropriate options to Config.in.legacy. However, even though
the BR2_BUSYBOX_VERSION_1_22_X is removed, we don't add a
Config.in.legacy option for it, since it would cause a legacy
warning for virtually *all* users as most people are currently
using 1.22.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:08 +0000 (20:03 +0200)]
gdb: remove versions 7.4 and 7.5
We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:07 +0000 (20:03 +0200)]
qt: remove gcc 4.6.x specific kludge
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:06 +0000 (20:03 +0200)]
gcc: remove versions 4.3.x and 4.6.x
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:05 +0000 (20:03 +0200)]
uclibc: remove BR2_UCLIBC_ARM_TYPE
The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:04 +0000 (20:03 +0200)]
package: remove references to uClibc 0.9.32
This commit removes all remaining references to uClibc 0.9.32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:03 +0000 (20:03 +0200)]
uclibc: remove version 0.9.32.1
This commit removes the 0.9.32.1 version of uClibc, which is very old,
and does not bring any specific advantage over 0.9.33, which has been
around for more than two years now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 1 Jul 2014 18:03:02 +0000 (20:03 +0200)]
binutils: remove 2.20.1, 2.21 and 2.23.1
- The 2.20.x series is old, it no longer makes sense to support it.
- In the 2.21.x series, we still have 2.21.1, so keeping 2.21 doesn't
make much sense, so this patch removes it.
- Similarly for the 2.23.x series, having both 2.23.1 and 2.23.2
doesn't make much sense, so this patch removes 2.23.1 and keeps
2.23.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Waldemar Brodkorb [Wed, 2 Jul 2014 15:31:53 +0000 (17:31 +0200)]
use default binutils for sh architecture
Tested toolchain compiles with binutils 2.22 and 2.24.
Result tested in Qemu 2.0.0. (only little endian version
tested)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 18:12:08 +0000 (15:12 -0300)]
mpd: add twolame support
Now that there's a twolame package we can add support for it in mpd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 17:20:54 +0000 (14:20 -0300)]
mpd: add pulseaudio deps comment, stylize libsndfile
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 17:20:53 +0000 (14:20 -0300)]
mpd: remove redundant depends
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 9 Jul 2014 21:20:22 +0000 (23:20 +0200)]
toolchain-external: remove experimental Blackfin toolchain
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185fab38824da5e9b7b5b9e781e31d368 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/
2a9d9c332a206fdb46bc8ba022c74d23082a6312/
http://autobuild.buildroot.org/results/e1c/
e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/
http://autobuild.buildroot.org/results/993/
993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 20:55:03 +0000 (17:55 -0300)]
linux: bump default to version 3.15.5
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 20:55:02 +0000 (17:55 -0300)]
linux-headers: bump 3.{4, 10, 14, 15}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 19:03:42 +0000 (16:03 -0300)]
rsync: bump to version 3.1.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
David Bachelart [Wed, 9 Jul 2014 12:33:45 +0000 (14:33 +0200)]
ccrypt: new package
ccrypt is a utility for encrypting and decrypting files and streams.
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Sat, 5 Jul 2014 21:07:40 +0000 (18:07 -0300)]
libv4l: Bump version to 1.0.1
Quite some work has been done from 0.8.3 to 1.0.1, and as a result
this commit is very intrusive. The biggest change is the move to an
autotools package.
Then, the options that enable utilities individually have been deprecated
and moved to Config.in.legacy. Instead, we introduce new option to select
either all the utilities. This change loses granularity in favor of
maintainability.
[Peter: needs host-pkgconf. Select and use argp-standalone on uClibc]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 9 Jul 2014 14:57:18 +0000 (16:57 +0200)]
xserver_xorg-server: drop host-xfont_font-util dependency
This is no longer needed now that
e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 9 Jul 2014 13:58:23 +0000 (15:58 +0200)]
ntpd: drop default /etc/default/ntpd file
With the recent change to the init script the default /etc/default/ntpd file
doesn't do anything, so don't install it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Angelo Compagnucci [Tue, 10 Jun 2014 12:58:40 +0000 (14:58 +0200)]
Fixing ntpd time syncing problem
Add ntp.conf file to make ntpd syncing.
Starting ntpd daemon with -g to sync time also with big offsets.
Removes the use of deprecated ntpdate command for initial time sync.
[Peter: drop unused NTPDATE_BIN variable]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 9 Jul 2014 12:13:17 +0000 (09:13 -0300)]
openvpn: disable plugins for static builds
Fixes:
http://autobuild.buildroot.net/results/082/
08295cdcb3d14198bc7fbddec89d6fead946afba/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 3 Jul 2014 20:00:39 +0000 (17:00 -0300)]
cryptodev-linux: fix license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 9 Jul 2014 13:43:36 +0000 (15:43 +0200)]
cloop: drop unused target variant
We only support cloop for the host (for fs/cloop), so drop the unused target
variant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 3 Jul 2014 20:00:38 +0000 (17:00 -0300)]
cloop: add license information
[Peter: clarify that advancecomp is GPLv2+, add COPYING]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 3 Jul 2014 20:00:37 +0000 (17:00 -0300)]
bootutils: add license information
[Peter: also add _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ezequiel García [Sat, 5 Jul 2014 21:08:02 +0000 (18:08 -0300)]
libnl: Move the pthread dependency menu comment
In order for this comment to be properly displayed, it must be moved to be
at the end of the file.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 5 Jul 2014 14:12:26 +0000 (16:12 +0200)]
xserver_xorg-server: Fix race condition when installing man pages, 2nd try
Should fix the still present bug:
http://autobuild.buildroot.net/results/045/
04514bc9a8d1aad8ddd7af4f0fd8c16edd2e89a9/
http://autobuild.buildroot.net/results/1f2/
1f25f744771fbb5124dca4563d79ea92cbfd72a3/
This patch reverts my previous attempt to fix this hard-to-catch race condition
http://git.buildroot.net/buildroot/commit/package/x11r7/xserver_xorg-server?id=
e244eb12dfc50bb56167d5fdaef3aac52b0ff6a3
and removes make target install-data from _INSTALL_STAGING_OPT, which was
introduced in 2008:
http://git.buildroot.net/buildroot/commit/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk?id=
d4e56ff4dc8a0528550eb8503956bdcddb2fe516
Comparing the content of STAGING_DIR with and without "make install-data" showed
no difference so I assume that is it no longer necessary to explicitly call this
make target as the normal install target takes care of everything.
The race condition occurs because "make install" and "make install-data" both
install usr/share/man/man1/Xserver.1
[Peter: don't remove host-xfont_font-util]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 8 Jul 2014 13:51:06 +0000 (10:51 -0300)]
mpd: fix build failures with gcc 4.9.x
As reported by Sagaert Johan in the mailing list mpd 0.18.x fails to
build with gcc 4.9.x
Patch status: sent upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 8 Jul 2014 20:17:53 +0000 (22:17 +0200)]
python3: improve isolation of build environment and error handling
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python3-012-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python3-013-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 8 Jul 2014 20:17:52 +0000 (22:17 +0200)]
python: improve isolation of build environment and error handling
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:11 +0000 (09:40 -0300)]
dmraid: add license information
[Peter; license is GPLv2+, drop LGPL, add LICENSE file]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:10 +0000 (09:40 -0300)]
lesstif: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:09 +0000 (09:40 -0300)]
libraw: add license information
[Peter: also add README to _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:08 +0000 (09:40 -0300)]
linux-fusion: add license information
[Peter: license is GPLv2+]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:06 +0000 (09:40 -0300)]
musepack: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:05 +0000 (09:40 -0300)]
opencv: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:04 +0000 (09:40 -0300)]
quota: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:03 +0000 (09:40 -0300)]
setserial: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:02 +0000 (09:40 -0300)]
texinfo: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:01 +0000 (09:40 -0300)]
torsmo: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:40:00 +0000 (09:40 -0300)]
usbmount: add license information
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 8 Jul 2014 19:41:05 +0000 (21:41 +0200)]
dvb-apps: fix static only build
This commit makes dvb-apps behave properly in a static-only build. It
passes the static=1 variable to the Makefile, and adds a patch that
fixes the Makefile to not build .so libraries when static=1.
Fixes:
http://autobuild.buildroot.org/results/3db/
3dbfa7b692d4b123b3ba6b55c84df12818273554/
[Peter: drop V=1 as pointed out by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Mon, 7 Jul 2014 21:44:33 +0000 (23:44 +0200)]
support/download: fix the git helper
When switching the git helper over to a shell script, a special case was
not carried over: in case the remote has the required reference, we
attempt a shallow clone, using --depth 1. However, this is not supported
when the remote is accessed with the http protocol.
Therefore, the download fails.
What happened before the conversion to a shell script was that the helper
in the Makefile would fallback to doing a full-clone.
This is the case and behaviour that were lost in the conversion.
To avoid making the script too complex, we only attempt a full clone if
needed. And we decide that a full clone is needed by default; we decide
it is unnecessary if the remote has the needed reference *and* the
shallow clone was successful.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 2 Jul 2014 12:39:59 +0000 (09:39 -0300)]
legal-info: depend on patch rather than extract
Switch legal-info generation dependency to patch rather than extract
so we can use debian/copyright from debian-maintained packages,
because the *orig* file alone doesn't contain the appropiate file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jason Pruitt [Tue, 1 Jul 2014 21:00:25 +0000 (23:00 +0200)]
librtlsdr: new package
librtlsdr is a library and software for using a Realtek RTL2832U based
DVB-T dongle as a cheap SDR.
[Thomas: change license to GPLv2+, reword help text for the detach
driver option.]
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 8 Jul 2014 13:00:43 +0000 (10:00 -0300)]
php: fix phar build failure for CLI
Disable the phar command-line tool since it requires php to pack itself
up. Fixes build failure for CLI (or CLI+CGI) variants of php.
Hardly useful for embedded scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 11 Jun 2014 11:33:15 +0000 (08:33 -0300)]
openntpd: add SysV initscript and user
Add the _ntp user that the daemon requires to work in any way.
Add a SysV-style initscript as well, but not with '-s' (set time
immediately after startup) because it can make the boot process stall
for a few seconds if there's no proper network connectivity/dns setup.
Make ntp and openntpd mutually exclusive since they overstep each other.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivien Didelot [Mon, 7 Jul 2014 21:07:53 +0000 (17:07 -0400)]
configs: add defconfig for TS-5x00 SBCs
This patch adds support for the TS-5x00 serie of Technologic Systems
x86-based Single Board Computers, featuring an AMD Elan520 processor.
http://wiki.embeddedarm.com/wiki/#AMD
[Peter: explicitly set arch/variant in defconfig, strip trailing spaces]
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 8 Jul 2014 11:00:48 +0000 (08:00 -0300)]
php: add option for phar builtin extension
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 8 Jul 2014 10:42:39 +0000 (12:42 +0200)]
python3: bump to version 3.4.1
A few minor updates on the patches were needed to resolve some
conflicts on the main Makefile.pre.in file, in the list of modules to
build/install.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 8 Jul 2014 10:42:38 +0000 (12:42 +0200)]
python: bump to version 2.7.8
The different patches are just refreshed to apply without fuzz, there
are no changes/conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Sat, 5 Jul 2014 10:02:22 +0000 (12:02 +0200)]
package/freetype: Fix removal of wrong include/freetype2/freetype link by host-freetype
Broken by http://git.buildroot.net/buildroot/commit/package/freetype/freetype.mk?id=
cc5b8e72308f523b3826ada5fe7009b722bf9a79
Fixes
http://autobuild.buildroot.net/results/b77/
b770d495115f25f182463eb4623cf9ee0a0f5d68/
http://autobuild.buildroot.net/results/5b4/
5b449a9120d4ece020e22c36299489e80ab094b9/
http://autobuild.buildroot.net/results/fb9/
fb9ec94fc4e2dcdf894ec774bd1e5809611c56fb/
http://autobuild.buildroot.net/results/b12/
b12989ec1c57f8cf3a2f743cc94de082692b7de6/
http://autobuild.buildroot.net/results/f25/
f255f64c210b04368069f80402da8afaecb9464b/
http://autobuild.buildroot.net/results/d66/
d66e80b5caab1661e1661922933a963c989d02cc/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Mon, 7 Jul 2014 21:44:32 +0000 (23:44 +0200)]
support/download: fix the bzr helper
bzr uses the name of the extension of the output file to known what
output format to use: tar, tgz, tar.bz2... If no extension is
recognised, bzr will output to a directory.
Since we use 'mktemp .XXXXXX' to generate temporary files, it obviously
never ends with a recognised extension. Thus, bzr expects the output to
be a directory, and fails since it is a file.
Fix that by forcing the output format.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 21:55:05 +0000 (18:55 -0300)]
quagga: bump to version 0.99.23
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 19:53:04 +0000 (16:53 -0300)]
ncmpc: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 19:53:03 +0000 (16:53 -0300)]
libmpdclient: new package
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 19:31:06 +0000 (16:31 -0300)]
libnss: bump to version 3.16.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 11:00:58 +0000 (08:00 -0300)]
linux: bump default to version 3.15.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 7 Jul 2014 11:00:57 +0000 (08:00 -0300)]
linux-headers: bump 3.{4, 10, 14, 15}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stephan Hoffmann [Thu, 3 Jul 2014 08:46:22 +0000 (10:46 +0200)]
Add support for Congatec QMX6
Add support for the iMX6 based conga-QMX6 family of Qseven modules.
This patch is based on Linux 3.0.35 from Congatec's kernel reporitory
[Peter: slightly simplify post build script]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
projects / buildroot.git / log