git.libre-soc.org Git - buildroot.git/log

package/swupdate: bump to version 2019.11

Add support for:
* mbedTLS as SSL choice
* zstd as compression option
* libgpiod to support microcontroller firmware update
* efibootmgr to support EFI Boot Guard
* libwebsockets and liburiparser to support SWU forwarder

Also:
* drop upstream patches
* drop CONFIG_GUNZIP. Setting it because Buxybox provides a binary named gunzip is wrong.
CONFIG_GUNZIP should only be set if zlib is provided, which Buxybox'
gunzip does not.

Regenerated the .config file by doing:

```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-yarl: bump to version 1.4.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gdb: disable gdbserver if full gdb is enabled for ARC

With recent update of ARC toolchain to arc-2019.09-eng/rc1 versions
GDB package builds started to fail in autobuilder:

http://autobuild.buildroot.net/results/bc5/bc52d0012944e15dee30a6e00a92f23c87d0dfda//

This error is caused by 73cc72729a18 ("Move gnulib to top level")
commit in binutils-gdb master branch and appears in ARC case because
arc-2019.09 GDB is based on binutils-gdb master branch and includes
this commit.

More information about this bug can be found there:
https://sourceware.org/bugzilla/show_bug.cgi?id=24729
https://sourceware.org/bugzilla/show_bug.cgi?id=25171
https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/issues/30

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imx-mkimage: bump to rel_imx_4.14.98_2.0.0_ga

This patch update the imx-mkimage package to version
rel_imx_4.14.98_2.0.0_ga.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/isl: bump to version 0.22

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: add mqtt option

Shairport Sync added support for the MQTT protocol in version 3.2. For
full MQTT support Avahi and DBus support are required.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: add dbus option

Shairport Sync added DBus support in version 3.2.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: add audio DSP convolution option

Already in version 3.1, shairport-sync added audio DSP convolution support. This
optional feature requires the sndfile library.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: make libdaemon an optional dependency

Since version 3.3 libdaemon is an optional dependency.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: bump to version 3.3.5

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: add me as a maintainer for the NETCONF stack

We've been using libyang, sysrepo, libnetconf2 and the Netopeer2 suite
of software for more than two years, so let's make this official.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysrepo: libnetconf2 is not needed

The libnetconf2 library is a dependency of Netopeer2. Sysrepo does not
have a NETCONF server or a NETCONF client, so it does not use this
library.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Acked-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysrepo: fix a typo when installing with systemd

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Acked-by: Heiko Thiery <heiko.thiery@kontron.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: add optional zeromq dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: disable gui

Currently gui is autodetected so disable it for now

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: add optional libminiupnpc dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: disable benchmarks

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: add host-pkgconf dependency

pkg-config can used to retrieve openssl and libevent dependencies

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: needs wchar

wchar is used in src/tinyformat.h and is a reverse dependency of boost

Fixes:
- No autobuilder failure (as package can't be enabled yet)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: give a default value for BR2_PACKAGE_BITCOIN_ARCH_SUPPORTS

bitcoin can never be enabled because BR2_PACKAGE_BITCOIN_ARCH_SUPPORTS
is never set as it has no default value

Fixes:
- No autobuilder failure

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitcoin: depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735

Obviously, bitcoin depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735, not on
BR2_TOOLCHAIN_HAS_GCC_BUG_64735

Fixes:
- No autobuilder failure

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: fix 0003-remove-cpp-requirement.patch

This patch was missing the following section:

@@ -1,4 +1,4 @@
-project('glib', 'c', 'cpp',
+project('glib', 'c',
   version : '2.62.3',
   # NOTE: We keep this pinned at 0.49 because that's what Debian 10 ships
   meson_version : '>= 0.49.2',

As such, the package still depended on g++.

Update the patch to add the above section.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/apitrace: fix build under uClibc/musl

Add a patch which has been merged upstream which allows apitrace to be
compiled under uClibc and musl.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: add option to build u-boot.itb image

It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mqevk: bump BSP components to 4.14.98_2.0.0

Update Kernel, U-Boot and ATF to NXP BSP version rel_imx_4.14.98_2.0.0_ga

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-scapy3k: remove package

Scapy3k is deprecated since Scapy supports Python 3. Scapy should be
used instead.

See https://bugs.busybox.net/show_bug.cgi?id=12376

Signed-off-by: Gabriel Potter <gabriel@potter.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cryptsetup: use external libargon2

don't use cryptsetup's intree libargon2

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi4_64: new defconfig

This configuration builds a 64bit image for RaspberryPi 4.

Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi: change deprecated pi3-miniuart-bt option to miniuart-bt

The pi3-minuart-bt Device Tree overlay has been renamed to
miniuart-bt, as it is useful/usable for other platforms than the
RPi3. So we use this DT overlay and rename the
--add-pi3-miniuart-bt-overlay option to --add-miniuart-bt-overlay
accordingly.

Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: bump to version 244

Other changes:
  - Update hash for README due to added licence directory tools/chromiumos.
  - Add hash for tools/chromiumos/LICENSE
  - Added BSD-3-Clause (tools/chromiumos) in systemd.mk due to the new
    tools/chromiumos directory.
  - Added tools/chromiumos/LICENSE to SYSTEMD_LICENSE_FILES in systemd.mk

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

busybox: don't overwrite existing inittab

If a inittab file was already provided in the skeleton, don't overwrite
it with the one that comes with the busybox package.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/apitrace: bump to version 9.0

Bump to upstream version 9.0, released 2019-11-26.

This may have been the case already in 8.0, but it is possible to
compile without X11 by just specifying ENABLE_X11=OFF, so the package
was updated to remove the X11 dependency.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: support different authentication frameworks

Use pam if available, otherwise use shadow.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: bump to version 0.116

Other changes:
  - Add spidermonkey as a dependency.
  - Add 0001-make-netgroup-support-optional.patch to allow building on musl.
  - Add a runtime dependency on dbus.
  - Add --disable-libelongind.
  - Add --disable-libsystemd-login.
  - Update dependencies for systemd pam support.
  - Update dependencies for udisks.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/grpc: bump to version 1.25.0

Other changes:

- Remove upstream patch 0004-Fix-gettid-naming-conflict.patch
- Remove upstream patch 0005-Rename-gettid-functions.patch
- Add a check for BR2_TOOLCHAIN_GCC_AT_LEAST_5 in grpc.mk. If the
   selected toolchain is not at least version 5 or higher and the
   optimization level is -Os, set the GRPC_CFLAGS and GRPC_CXXFLAGS
   optimizations to -O2. This check prevents the following error:

   error: failure memory model cannot be stronger than success memory model for '__atomic_compare_exchange'

Tested with test-pkg, all tests passed:
            br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
  br-arm-cortex-m4-full [3/6]: SKIPPED
         br-x86-64-musl [4/6]: OK
     br-arm-full-static [5/6]: SKIPPED

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysdig: disable all bundled dependencies

Disable all dependencies through -DUSE_BUNDLED_DEPS=OFF instead of
disabling them one by one

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua-resty-http: bump to version 0.15

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua-curl: bump to version 0.3.11

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/alsa-utils: remove --disable-alsatest

atopology is needed to build alsa-utils since version 1.2.1 and
https://github.com/alsa-project/alsa-utils/commit/c8fdd38c74de2e8b7b2b5a4576787d5e9b4ae807

However, atopology is not correctly detected if --disable-alsatest is
passed so drop --disable-alsatest that is not needed since commit
2c03ec15307b567fd2250fe2a7981a89d19b87a9 (from 2002), which removed
AC_TRY_RUN

Fixes:
- http://autobuild.buildroot.org/results/d0fb760669b02b813115af04adcf24530d35f4e1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xapian: bump to version 1.4.14

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/matchbox-desktop: remove unrecognized option

--enable-expat is not a recognized option so remove it

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libv4l: fix musl build

Fixes:
http://autobuild.buildroot.net/results/bf8/bf88f89bdb966ef54938e4274114d4afe5668b1f/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/acsccid: needs iconv

Upstream commit
https://github.com/acshk/acsccid/commit/5672d821ba96deb6c0c11060e4de0c9dab9b21c7
added "include <iconv.h>"

Fixes:
http://autobuild.buildroot.net/results/04e/04eac264718a47c550bb48b3c36314751fb4de91/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnss: bump to version 3.48

NSS 3.48 requires NSPR 4.24 already bumped. It already fixed
CVE-2019-11745 but in version 3.47.1 it's already fixed. Anyway from
3.47 to 3.48 it fixes:
CVE-2019-11745: EncryptUpdate should use maxout, not block size

Remove an upstreamed patch but introduce a new one to fix building with
signal.h include.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jailhouse: bump to version 0.11

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ytree: bump to version 2.00

License is GPL-2.0+ not GPL-2.0 as specified in files that contain
license information: tilde.{h,c} and xmalloc.{h,c}

Release 2.00 also added a comment about this in CHANGES and README

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xl2tp: bump to version 1.3.15

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/drbd-utils: bump to version 9.11.0

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qpdf: remove pcre dependency

pcre is not needed since version 7.0.0 and
https://github.com/qpdf/qpdf/commit/9a96e233b051b31289c84f90a321583887b1400a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/linksprite_pcduino: add host-openssl for kernel build

Updated kernel version for pcDuino board requires host-openssl
to build successfully. This commit adds the required option:
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/371286142
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qpdf: fix license

qpdf is also licensed under Apache-2.0 since version 7.0.0 and
https://github.com/qpdf/qpdf/commit/07c8bb2843f1a975a27d396da33d813a1537ee3a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zlog: bump to version 1.2.14

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-golang: enable trimpath option for reproducible builds

The -trimpath option (introduced in go 1.13) removes absolute build paths
from the target binary. This results in more consistent / reproducible
builds across different systems with varying paths to Buildroot.

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention that this is a go 1.13+ feature]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wine: bump to version 4.0.3

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/upower: bump to version 0.9.11

- Remove patch (already in version)
- Add hash for license file
- Drop host-intltool dependency for $(TARGET_NLS_DEPENDENCIES), see
https://gitlab.freedesktop.org/upower/upower/commit/d15e95f785b21be3ca45e9e2cc7143779c0b5176

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nss-pam-ldapd: bump to version 0.9.11

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xxhash: bump to version 0.7.2

- Remove patch (already in version)
- Update hash of LICENSE file and remove xxhsum.c from
  XXHASH_LICENSE_FILES as LICENSE contains both licenses
  (BSD-2-Clause and GPL-2.0+) since
  https://github.com/Cyan4973/xxHash/commit/330444389b5091db1fae1cc58c890b9f99b8b35d
- Update XXHASH_LICENSE to specify that BSD-2-Clause is for the library
  and GPL-2.0+ for xxhsum CLI

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/emlog: bump to version 0.70

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/go: bump to 1.13.5

go1.13.5 (released 2019/12/04) includes fixes to the go command, the runtime,
the linker, and the net/http package.

https://github.com/golang/go/issues?q=milestone%3AGo1.13.5

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2019.02.8

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2019.02.8

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit aaa1437b110f886ee24757595542f715a77d702a)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2019.08.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2019.08.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 21e50b5598625bda1f6f98566113cce1dba976ae)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luajit: switch to moonjit fork

This fork is based on LuaJIT 2.1.0-beta3 which supports ARM64.

The license file is changed with the copyright from the Moonjit
developers, and an additional copy of the MIT license. Therefore the
license terms are still the same: MIT.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: add details about why the hash of the license file changes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/spidermonkey: depends on host gcc >= 4.9

If GCC on the host is older than 4.9, during the configure stage an
error is thrown such as:

checking whether the host C compiler can be used... no
ERROR: Only GCC 4.9 or newer is supported (found version 4.8.2).

Depend on the host gcc version being >= 4.9

Fixes:
http://autobuild.buildroot.net/results/192661452fd522bf46b23d5a7a522eb853a984bf

Signed-off-by: Adam Duskett <aduskett@greenlots.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/arptables: bump to version 0.0.5

- Update site to retrieve latest version
- Remove first, second and third patches (already in version)
- Use the new COPYING file as the license file
- arptables binary is now named arptables-legacy since
http://git.netfilter.org/arptables/commit/?id=28b22d55615447c94c5058e0aacec612ebc27f2a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-python: use _CONFIGURE_OPTS in the build environment

When building host or target python packages, we need to ensure that
the build environment utilize {HOST|TARGET}_CONFIGURE_OPTS. This
ensures that the correct linker and compiler environment variables are
set to compile utilizing either the host or target folders.

It was discovered that when compiling a host-python package, it was
using linking against the build machines library folder instead of the
host folder because LDFLAGS was not properly set and was improperly
detecting whether or not a shared or static library was present in the
host folder.

CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-daphne: bump to version 2.4.0

Other changes:
  - Update hash for PKG-INFO due to a version bump in the file.
  - select BR2_PACKAGE_PYTHON_TWISTED_TLS as a runtime dependency.
  - Update 0001-remove-pytest-runner-requirement.patch to work with the new
    version.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-twisted: add config for HTTP2 support

Add an option that selects all of the necessary python packages to
ensure that twisted has HTTP2 support.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-twisted: add config for TLS support

Add an option that selects all of the necessary python packages to
ensure that twisted has TLS support.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-twisted: bump to version 19.10.0

Tested with
run-tests tests.package.test_python_twisted.TestPythonPy3Twisted -d ./dl -o ./o

Ran 1 test in 388.506s
OK

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 19.2.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.{3, 4}.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xserver_xorg-server: bump version to 1.20.6

Removed patches 0006 & 0007 which were applied upstream as single
commit on the server-1.20-branch branch:
https://gitlab.freedesktop.org/xorg/xserver/commit/07efd81b819f21046afc0bb7e19a6cdf7f3c7ea9

Updated upstream URL for patch 0001.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mosquitto: bump to v1.6.8

This is a bugfix release, see:
https://mosquitto.org/blog/2019/11/version-1-6-8-released/

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-buildroot: allow ARC big endian glibc builds

The current ARC glibc version in buildroot arc-2019.09-rc1 allows to
build an ARC big endian configuration, so let's allow this.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: remove Daniel Nystrom

<daniel.nystrom@timeterminal.se>: host ASPMX.L.GOOGLE.COM[172.217.218.26] said:
    550-5.1.1 The email account that you tried to reach does not exist. Please
    try 550-5.1.1 double-checking the recipient's email address for typos or
    550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
    https://support.google.com/mail/?p=NoSuchUser o14si10209151edi.116 - gsmtp
    (in reply to RCPT TO command)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: test_python_django: add missing line

flake8 complains with:

test_python_django.py:25:1: E302 expected 2 blank lines, found 1

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: add missing python-gobject test

Commit 600132f8c08a5ae3d399559dd9c17d3b7b4c6ae3 added a test for
python-gobject but failed to update .gitlab-ci.yml. Do that now.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/e2tools: bump to version 0.0.16.4

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pigpio: bump to version 72

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-date: bump to version 6.05

license lives now in its own file

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-cookies: bump to version 6.08

years updated in LICENSE:
< This software is copyright (c) 2002-2017 by Gisle Aas.
> This software is copyright (c) 2002-2019 by Gisle Aas.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mail-dkim: bump to version 0.58

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-libwww-perl: bump to version 6.43

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-entity-parser: bump to version 0.22

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-slurp: bump to version 9999.29

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-date-manip: bump to version 6.79

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-apache-logformat-compiler: bump to version 0.36

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/glibc: drop dependency of utilities on bash

The dependency was added because ldd uses bash-specific syntax to
localize messages. Add a post-patch hook, instead, to replace the
occurrences of $"foo" by "foo", simply, so the code becomes POSIX
sh compliant if bash is not selected.

Also set the configuration environment accordingly to replace the
/bin/bash hashbang by /bin/sh.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add python-django test

This test comprises of four simple steps:
  1: Start a new simple project called testsite.
  2: Run ./manage.py migrate on the new testsite.
  3: Run ./manage.py runserver 0.0.0.0:1234 & sleep 30
    - The sleep 30 is necessary as it may take several seconds for
      the django server to fully start.
  4: Run netstat to ensure the server opened port 1234.

Signed-off-by: Adam Duskett <aduskett@greenlots.com>
[Thomas: use self.assertRunOk() when appropriate]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-django: bump to version 3.0

Other changes:
- Select BR2_PACKAGE_PYTHON_ASGIREF as a new runtime dependency.
- Select BR2_PACKAGE_PYTHON_SQLPARSE as a new runtime dependency.

Signed-off-by: Adam Duskett <aduskett@greenlots.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel: use tarballs to fetch U-Boot and at91bootstrap

Use tarballs for U-Boot and at91bootstrap instead of cloning the
repositories.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnspr: bump to version 4.24

All patches have been upstreamed so remove them.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libepoxy: bump to version 1.5.4

This release contains two minor improvements (smaller library size, and
updates to the GL registry), plus a couple of build fixes which are not
relevant for Buildroot (one for Solaris; another for unit tests, which
we do not build):

https://github.com/anholt/libepoxy/releases/tag/1.5.4

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: properly propagate libargon2 dependencies

Fixes:
- http://autobuild.buildroot.org/results/72412a68da44d7ecc87656436a17542cafcf1f95

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openjdk: use official hg.openjdk.java.net repository

Since Java 11 (and possibly earlier), OpenJDK now has its own official
repository at hg.openjdk.java.net which is referenced in all OpenJDK
documentation.  This patch brings buildroot into line with that
source, reducing the opportunity for code injection, and allowing
consistent patching both across projects and for patches specific to
buildroot environments.

diff -ru shows that the only changes between the downstream and upstream files at
this point in time is the addition of a .hg_archive.txt file,  containing:

repo: fd16c54261b32be1aaedd863b7e856801b7f8543
node: 7b6accc7c009304dd2979ea16c1cb15bf749a1fc
branch: default
tag: jdk-12.0.2+10
tag: jdk-12.0.2-ga

This does, however, change the hash for the tar.gz file (but not for the license).

With respect to the concern regarding upstream hash consistency, we have now been
using these archives for just over a year (since OpenJDK 11) and we haven't seen an
archive hash change in that time.  This was a vast improvement on the previous
Mercurial forest.  /archive is exactly as is sounds.  It's an archive that doesn't
change, which is why it effectively negates the need for a "downstream" mirror.

Tests completed successfully (which is not surprising since there are no code changes here):

$ ./support/testing/run-tests -d ./dl/ -k -o test_dir tests.package.test_openjdk.TestOpenJdk
14:35:25 TestOpenJdk                              Starting
['Hello, World']
['Test: Get JNI Version passed', 'Test: Read Native String Constant passed', 'Test: Write Java String to Native Library passed', 'Test: Write Java Char Array to Native Library passed', 'Test: Write String Member to Native Library passed', 'Test: Set String Member from Native Library passed', 'Test: Execeute Java Function from Native Library passed', 'Test: Instantiate Java Class passed', 'Test: Call Native Library to Set System Time passed']
14:35:46 TestOpenJdk                              Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 20.614s

OK

Signed-off-by: Tudor Holton <tudor@tudorholton.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rauc: select fw_printenv for uboot based systems

When operating on a uboot based system, rauc interacts with
the bootloader environment using fw_printenv and fw_setenv [1].

These commands should therefore be present on the target if
the system being built uses uboot.

[1] See:
https://github.com/rauc/rauc/blob/v1.2/src/bootchooser.c#L21-L22
https://github.com/rauc/rauc/blob/v1.2/src/bootchooser.c#L644-L645

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-brotli: fix build failure due to gcc bug 68485

The python-brotli package exhibits gcc bug 68485 when built for the
Microblaze architecture with optimization enabled, which causes a build
failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y.

Fixes:

http://autobuild.buildroot.net/results/24b/24b23175ab27615fb377bb4d5f6c656dccf10a86/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-kconfig: fix reconfigure for kconfig packages

Commit 4b81badbcc0b25678ac6627548160702731cf393

    Currently, calling foo-reconfigure for a kconfig-based package will not
    re-trigger the configuration (kconfig-wise) step for the package.

was supposed to solve this problem and lately we had

Commit 05fea6e4a60a38a797d9bacbf318a2cd7dbd435f

    infra/pkg-kconfig: do not rely on package's .config as a timestamp

that introduced the .stamp_dotconfig file.

For this reason, to trigger a kconfig package reconfigure is now
necessary to remove the .stamp_dotconfig file.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>