*** empty log message ***

daily update

2007-12-13  Michael Snyder  <msnyder@specifix.com>

* mips-linux-tdep.c (mips64_fill_gregset): Remove unused variable.

gas/
* config/tc-xtensa.c (xg_symbolic_immeds_fit): Relax for weak
references but not weak definitions.
gas/testsuite/
* gas/xtensa/all.exp: Run new weak-call test.
* gas/xtensa/weak-call.d: New.
* gas/xtensa/weak-call.s: New.

* dwarf2read.c (attr_form_is_constant): New function.
(dwarf2_add_field): Use it and attr_form_is_section_offset to
recognize DW_AT_data_member_location attributes.  Use
dwarf2_get_attr_constant_value when the attribute is a constant.

* dwarf2read.c (attr_form_is_section_offset): New function.
(dwarf_add_member_fn, read_common_block, read_partial_die)
(dwarf2_symbol_mark_computed): Use it, instead of writing it out.

Remove unused support for target-based exception catching.
* target.h (struct target_ops): Delete
to_enable_exception_callback and to_get_current_exception_event
members.
(target_enable_exception_callback)
(target_get_current_exception_event): Delete macros.
* target.c (update_current_target): Remove code to inherit and
default those members.
(debug_to_enable_exception_callback)
(debug_to_get_current_exception_event): Delete functions.
(setup_target_debug): Don't install those methods.
* inf-child.c (inf_child_enable_exception_callback)
(inf_child_get_current_exception_event): Delete dummy functions.
(inf_child_target): Don't install them in the target vector.
* breakpoint.h (enum bptype): Delete bp_catch_catch,
bp_catch_throw.
* breakpoint.c (cover_target_enable_exception_callback)
(ep_is_exception_catchpoint, create_exception_catchpoint): Delete
functions.
(insert_bp_location, update_breakpoints_after_exec)
(remove_breakpoint, ep_is_catchpoint, print_it_typical)
(bpstat_stop_status, bpstat_what)
(bpstat_get_triggered_catchpoints, print_one_breakpoint_location)
(user_settable_breakpoint, allocate_bp_location)
(disable_watchpoints_before_interactive_call_start)
(enable_watchpoints_after_interactive_call_stop, mention)
(delete_breakpoint, breakpoint_re_set_one, disable_command)
(enable_command): Remove exception catchpoint cases.
(catch_exception_command_1): Don't try target-based exception
handling.
* stack.c (catch_info): Call print_frame_label_vars
unconditionally.

*** empty log message ***

daily update

Wrap long line in previous entry.

    * config/tc-xtensa.c (xg_symbolic_immeds_fit): Do not relax calls to            weak symbols if longcalls are disabled.

    * elf32-xtensa.c (elf_xtensa_do_reloc): Update self_address along with
        address.
        (print_action_list): Fix name for ta_convert_longcall.

* remote-mips.c (mips_load): Use regcache_set_valid_p() instead
of setting deprecated_register_valid array directly.

*** empty log message ***

From Cary Coutant: Test TLS initial-exec model.

From Cary Coutant: Set DF_STATIC_TLS as appropriate.

daily update

* config/tc-xtensa.c (frag_format_size): Handle frags that expand to
wide branches.
(get_aligned_diff): For RELAX_ALIGN_NEXT_OPCODE, skip to the next
non-empty frag to find the LOOP instruction.  Change comma typo to
a semicolon.
(relax_frag_immed, convert_frag_immed): Rename wide_insn variable to
from_widen_insn.

From Cary Coutant: Fix x86_64 TLS problem.

From Craig Silverstein: Speed up ODR violation reporting.

    * bfd/elf.c (_bfd_elf_copy_private_symbol_data): Don't copy shndx if
        the symbol's section is the undefined section.
        * gas/testsuite/gas/elf/symtab.s: New test.
        gas/testsuite/gas/elf/symtab.d: New expected output.
        gas/testsuite/gas/elf/elf.exp: Run the new symbtab test.

* dwarf2.h (DW_AT_hi_user): Correct value.

From Cary Coutant: Handle TLS entry for TLS module index.

*** empty log message ***

warning messages should contain "warning:"

* config/tc-m32r.c (md_begin): Mark .sbss as being bss style section.

daily update

Keep views on views_ list so that they can be found again.

* lib/gdb.exp (build_id_debug_filename_get): OBJCOPY pipe being read
must be set to binary.

gas/
* config/tc-mips.h (mips_nop_opcode): Declare.
(NOP_OPCODE): Define.
(mips_segment_info): New structure.
(TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list.
* config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE.
(mips_record_mips16_mode): New function.
(install_insn): Call it.
(mips_align): Likewise.  Turn the fill argument into an "int *".
Use frag_align_code for code segments if no fill data is given.
(s_align): Adjust call accordingly.
(mips_nop_opcode): New function.
(mips_handle_align): Use the first variable byte to decide which
nop sequence is needed.  Use md_number_to_chars and mips16_nop_insn.

gas/testsuite/
* gas/mips/align2.s, gas/mips/align2.d, gas/mips/align2-el.d: New
tests.
* gas/mips/mips.exp: Run them.

*** empty log message ***

daily update

* lib/gdb.exp (gdb_gnu_strip_debug): Remove debug format test.

*** empty log message ***

daily update

Released gold-alpha 0.9.

From Craig Silverstein: Fix error message, add this->.

* readelf.c (is_32bit_pcrel_reloc): Add Xtensa.

*** empty log message ***

From Cary Coutant: Fix x86_64 TLS.  Also set DT_TEXTREL as well as
DF_TEXTREL.

daily update

2007-12-07  Bob Wilson  <bob.wilson@acm.org>

include/elf/
* xtensa.h (R_XTENSA_32_PCREL): New.

bfd/
* elf32-xtensa.c (elf_howto_table): Add R_XTENSA_32_PCREL.
(elf_xtensa_reloc_type_lookup): Handle BFD_RELOC_32_PCREL.
(elf_xtensa_check_relocs): Use default case for all relocations that
need nothing done here.
(elf_xtensa_do_reloc): Compute self_address for all relocation types.
Handle R_XTENSA_32_PCREL.
(elf_xtensa_relocate_section): Check for R_XTENSA_32_PCREL for dynamic
symbols.
(check_section_ebb_pcrels_fit): Ignore R_XTENSA_32_PCREL relocations.

gas/
* config/tc-xtensa.c (O_pcrel): Define.
(suffix_relocs): Add pcrel suffix.
(md_pseudo_table): Add 4byte and 2byte directives.
(xtensa_elf_cons): Pass correct pcrel argument to fix_new_exp.
(xg_assemble_literal): Likewise.  Check for O_pcrel.
(expression_maybe_register): Reorganize.  Handle BFD_RELOC_32_PCREL.
(xg_valid_literal_expression): Allow O_pcrel.
(md_pcrel_from, md_apply_fix): Handle BFD_RELOC_32_PCREL.
(tc_gen_reloc): Fix punctuation in error message.

gas/testsuite/
* gas/xtensa/all.exp: Run new pcrel test.
* gas/xtensa/err-pcrel.s: New.
* gas/xtensa/pcrel.d: New.
* gas/xtensa/pcrel.s: New.
* gas/xtensa/xtensa-err.exp: New.

From Cary Coutant: Fix handling of RELATIVE RELA relocs.

* mips-tdep.c (extended_offset): Fix a comment.

* target.c (update_current_target): Inherit to_log_command.
* target.h (struct target_ops). Add to_log_command.
(target_log_command): New macro.
* top.c (execute_command): Call target_log_command() rather than
serial_log_command().
* monitor.c (init_base_monitor_ops): Initialize to_log_command.
* remote-m32r-sdi.c (init_m32r_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* remote.c (init_remote_ops): Likewise.

* server.c (myresume): Add own_buf argument.
(main): Update calls.

Fix ehframe header handling for shared libraries.

* linux-low.c (linux_wait, linux_resume): Do not handle async I/O.
* remote-utils.c (remote_open): Do not call disable_async_io.
(block_async_io): Delete.
(unblock_async_io): Make static.
(initialize_async_io): New.
* server.c (handle_v_cont): Handle async I/O here.
(myresume): Likewise.  Move other common resume tasks here...
(main): ... from here.  Call initialize_async_io.  Disable async
I/O before the main loop.
* server.h (initialize_async_io): Declare.
(block_async_io, unblock_async_io): Delete prototypes.
* spu-low.c (spu_resume, spu_wait): Do not handle async I/O here.

    * config/tc-xtensa.c (xg_force_frag_space): Delete.
        (xg_finish_frag, xg_assemble_literal_space): Replace calls to it.
        (xtensa_create_property_segments, xtensa_create_xproperty_segments):
        Set output_section for new property sections.  Use subseg_set and
        seg_info instead of retrieve_segment_info.  Adjust arguments to
        add_xt_block_frags and add_xt_prop_frags.  Use standard functions
        to create frags and fix records.
        (retrieve_segment_info): Delete.
        (add_xt_block_frags, add_xt_prop_frags): Replace calls to
        retrieve_segment_info.  Remove unused xt_block_sec arguments.

From Cary Coutant: Some x86_64 shared library fixes.

From Cary Coutant: Remove commented out assert.  Also add comment for
bitfield check.

* infrun.c (init_wait_for_inferior): Reset target_last_wait_ptid.
(handle_inferior_event): Clear stop_stack_dummy earlier.

*** empty log message ***

* addrmap.c (addrmap_splay_tree_remove): New function.
(addrmap_mutable_set_empty): Use it.

daily update

config/
* mt-sde (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Use +=, not =.
* mt-mips-elfoabi: Likewise.

* addrmap.c, addrmap.h: Update to GPLv3.

* addrmap.c (struct addrmap): Make the referenced function table
const.
(addrmap_fixed_funcs, addrmap_mutable_funcs): Declare const.
Don't use designated initializers.

* addrmap.c (addrmap_fixed_create_fixed, addrmap_mutable_find)
(addrmap_mutable_relocate): Use internal_error, not abort.

From Craig Silverstein: Reorganize testsuite Makefile.am.

* NEWS: Mention support for non-contiguous lexical blocks and
function bodies.

* gdbarch.sh (stab_reg_to_regnum, dwarf_reg_to_regnum)
( dwarf2_reg_to_regnum, sdb_reg_to_regnum, ecoff_reg_to_regnum): Add
gdbarch as parameter.
* gdbarch.{c,h}: Regenerate.

* xtensa-tdep.c (xtensa_reg_to_regnum): Add gdbarch as parameter.
Replace current_gdbarch by gdbarch.
* s390-tdep.c (s390_dwarf_reg_to_regnum): Likewise.
* rs6000-tdep.c (rs6000_stab_reg_to_regnum)
(rs6000_dwarf2_reg_to_regnum): Likewise.
* mips-tdep.c (mips_stab_reg_to_regnum)
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
* mep-tdep.c (mep_debug_reg_to_regnum): Likewise.
* m32c-tdep.c (m32c_debug_info_reg_to_regnum): Likewise.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise
* h8300-tdep.c (h8300s_dbg_reg_to_regnum)
(h8300_dbg_reg_to_regnum): Likewise.
* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Likewise.
* arch-utils.c (no_op_reg_to_regnum): Likewise.
* arch-utils.h (no_op_reg_to_regnum): Likewise.
* arm-tdep.c (arm_dwarf_reg_to_regnum): Likewise.
* cris-tdep.c (cris_dwarf2_reg_to_regnum): Likewise.
* hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Likewise.
* ia64-tdep.c (ia64_dwarf_reg_to_regnum): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.

2007-12-06  Mick Davis  <mickd@goanna.iinet.net.au>

* remote-utils.c (readchar): Allow binary data in received messages.

Localize infrun use of remove_breakpoints.
* infrun.c (handle_inferior_event): Remove
calls to remove_breakpoints, except where needed to
communicate change of breakpoint locations to inferior.
(keep_going): If steppping over breakpoint, remove
breakpoints.

Clarify infrun variable naming.
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint.  Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.

2007-12-06  Pierre Muller  <muller@ics.u-strasbg.fr>

* win32-nat.c: Allow compilation if CORE_ADDR is 8 byte long.
Add "gdb_stdint.h" dependency required for uintptr_t type use.
(handle_output_debug_string): Use uintptr_t typecast.
(handle_exception): Ditto.
(win32_xfer_memory): Ditto.
* Makefile.in (win32-nat.o): Add dependency to gdb_stdint header.

Initialize variable to avoid warning.

From Cary Coutant: More support for generating shared libraries.

Fix comment.

Don't write out the symbol table when stripping.

*** empty log message ***

daily update

Rework Stringpool to not compute the hash code twice when adding a new
string.

* elf32-spu.c (spu_elf_size_stubs): Do consider branches to
non-function symbols for overlay stubs.

* config.sub, config.guess: Update from upstream sources.

From Craig Silverstein: Support -o -.

From Craig Silverstein: Test some flags.

Stringpool stats.  Also make Symbol_table support functions inline.

*** empty log message ***

Support lexical blocks and function bodies that occupy
non-contiguous address ranges.
* addrmap.c, addrmap.h: New files.
* block.h (struct addrmap): New forward declaration.
(struct blockvector): New member, 'map'.
(BLOCKVECTOR_MAP): New accessor macro.
* block.c: #include "addrmap.h"
(blockvector_for_pc_sect): If the blockvector we've found has
an address map, use it instead of searching the blocks.
* buildsym.c: #include "addrmap.h"
(pending_addrmap_obstack, pending_addrmap_interesting): New static
variables.
(really_free_pendings): If we have a pending addrmap, free it too.
(record_block_range): New function.
(make_blockvector): If we have an interesting pending addrmap,
record it in the new blockvector.
(start_symtab, buildsym_init): Assert that there is no pending
addrmap now; we should have cleaned up any addrmaps we'd built
previously.
(end_symtab): If there is a pending addrmap left over that didn't
get included in the blockvector, free it.
* buildsym.h (struct addrmap): New forward declaration.
(record_block_range): New prototype.
* objfiles.c: #include "addrmap.h".
(objfile_relocate): Relocate the blockvector's address map, if
present.
* dwarf2read.c (dwarf2_record_block_ranges): New function.
(read_func_scope, read_lexical_block_scope): Call it.
* Makefile.in (SFILES): Add addrmap.c.
(addrmap_h): New header dependency variable.
(COMMON_OBS): Add addrmap.o.
(addrmap.o): New rule.l
(block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).

* block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
pointer to the block, not its index in the blockvector.
(block_for_pc_sect): Use the returned block, instead of looking it
up ourselves.
* block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
declarations.
* breakpoint.c (resolve_sal_pc): Use returned block, instead of
looking it up ourselves.
* stack.c (print_frame_label_vars): Disable function, which
depends on the block's index.

* buildsym.c (finish_block): Return the block we've built.
* buildsym.h (finish_block): Update prototype.

* defs.h (CORE_ADDR_MAX): New constant.

From Craig Silverstein: Support irregular output files.

* coffread.c (decode_type): Use builtin_type_int32 instead
of FT_INTEGER fundamental type for array range index type.
(decode_base_type): Use builtin types of current_gdbarch
instead of fundamental types.

* dwarf2read.c (struct dwarf2_cu): Remove ftypes member.
(read_file_scope): Do not initialize ftypes member.
(dwarf_base_type, dwarf2_fundamental_types): Remove functions.
(read_array_type): Use builtin_type_int32 instead of FT_INTEGER
fundamental type for array range index type.
(read_tag_string_type): Likewise for string range index type.
Also, do not overwrite FT_CHAR type with new string type.
(read_base_type): If DW_AT_name is missing, create unnamed type
with given properties instead of looking for a fundamental type.
Create new types as TYPE_TARGET_TYPE for DW_ATE_address and
DW_ATE_complex_float types.
(read_subrange_type): Create new type to represent missing
DW_AT_type instead of looking for a fundamental type.
(die_type): Use builtin type to represent "void" instead of
looking for a fundamental type.

* stabsread.c (define_symbol): Use builtin types to represent
'r' and 'i' floating-point and integer constants.

* gdbtypes.c (lookup_fundamental_type): Remove.
* gdbtypes.h (lookup_fundamental_type): Remove prototype.
(FT_VOID, FT_BOOLEAN, FT_CHAR, FT_SIGNED_CHAR, FT_UNSIGNED_CHAR,
FT_SHORT, FT_SIGNED_SHORT, FT_UNSIGNED_SHORT, FT_INTEGER,
FT_SIGNED_INTEGER, FT_UNSIGNED_INTEGER, FT_LONG, FT_SIGNED_LONG,
FT_UNSIGNED_LONG, FT_LONG_LONG, FT_SIGNED_LONG_LONG,
FT_UNSIGNED_LONG_LONG, FT_FLOAT, FT_DBL_PREC_FLOAT, FT_EXT_PREC_FLOAT,
FT_COMPLEX, FT_DBL_PREC_COMPLEX, FT_EXT_PREC_COMPLEX, FT_STRING,
FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL, FT_BYTE, FT_UNSIGNED_BYTE,
FT_TEMPLATE_ARG, FT_DECFLOAT, FT_DBL_PREC_DECFLOAT,
FT_EXT_PREC_DECFLOAT, FT_NUM_MEMBERS): Remove macros.
* objfiles.c (struct objfile): Remove fundamental_types member.
* symfile.c (reread_symbols): Do not clear fundamental_types.

* language.h (struct language_defn): Remove la_fund_type member.
(create_fundamental_type): Remove.
* language.c (unk_lang_create_fundamental_type): Remove.
(unknown_language_defn, auto_language_defn,
local_language_defn): Adapt initializer.
* ada-lang.c (ada_create_fundamental_type): Remove.
(ada_language_defn): Adapt initializer.
* c-lang.h (c_create_fundamental_type): Remove prototype.
* c-lang.c (c_create_fundamental_type): Remove.
(c_language_defn, cplus_language_defn, asm_language_defn,
minimal_language_defn): Adapt initializer.
* f-lang.c (f_create_fundamental_type): Remove.
(f_language_defn): Adapt initializer.
* jv-lang.c (java_create_fundamental_type): Remove.
(java_language_defn): Adapt initializer.
* m2-lang.c (m2_create_fundamental_type): Remove.
(m2_language_defn): Adapt initializer.
* objc-lang.c (objc_create_fundamental_type): Remove.
(objc_language_defn): Adapt initializer.
* p-lang.h (pascal_create_fundamental_type): Remove prototype.
* p-lang.c (pascal_create_fundamental_type): Remove.
(pascal_language_defn): Adapt initializer.
* scm-lang.c (scm_language_defn): Adapt initializer.

Print symbol table statistics with --stats.

daily update

2007-11-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* Makefile.in (decimal32.o): Prepend $(srcdir) to dependencies
and substitute $< for the source file in compilation command.
(decimal64.o): Likewise.
(decimal128.o): Likewise.
(bid2dpd_dpd2bid.o): Likewise.
(host-ieee32.o): Likewise.
(host-ieee64.o): Likewise.
(host-ieee128.o): Likewise.

* elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Create DT_PLTGOT
entry for all dynamic objects.

* features/mips-cpu.xml: Specify "regnum" for "r0" explicitly.
* features/mips64-cpu.xml: Likewise.
* features/mips-fpu.xml: Specify "regnum" for "f0" explicitly.
* features/mips64-fpu.xml: Likewise.
* features/mips-linux.c: Regenerate.
* features/mips64-linux.c: Regenerate.

* target.h (target_find_new_threads): Fix definition.

* elf32-spu.c (spu_elf_size_stubs): Correct section alignment.

From Craig Silverstein: Use gold_fatal in options.h, beef up value checks.

*** empty log message ***

* readelf.c (is_32bit_abs_reloc, is_32bit_pcrel_reloc): Add SPU.

* config/tc-ppc.c (ppc_tc): Allow a space between toc symbol
name and bracket.

daily update

* win32-low.c (attaching): New global.
(win32_create_inferior): Clear the `attaching' global.
(win32_attach): Set the `attaching' global.
(get_child_debug_event) [_WIN32_WCE]: Stop the inferior when
attaching.  Only set a breakpoint at the entry point if not
attaching.

* server.c (main): Don't report dll events on the initial
connection on attaches.

* server.c (main): Relax numerical bases supported for the pid of
the --attach command line argument.

* win32-low.c (win32_attach): Call OpenProcess before
DebugActiveProcess, not after.  Add last error output to error
call.

* win32-low.c (win32_get_thread_context)
(win32_set_thread_context): New functions.
(thread_rec): Use win32_get_thread_context.
(continue_one_thread, win32_resume): Use win32_set_thread_context.
* win32-low.h (win32_thread_info) [_WIN32_WCE]: Add `base_context'
field.

* win32-low.c (soft_interrupt_requested, faked_breakpoint): New
global variables.
(child_add_thread): Minor cleanup.
(child_continue): Resume artificially suspended threads before
calling ContinueDebugEvent.
(suspend_one_thread): New.
(fake_breakpoint_event): New.
(get_child_debug_event): Change return type to int.  Check here if
gdb sent an interrupt request.  If a soft interrupt was requested,
fake a breakpoint event.  Return 0 if there is no event to handle,
and 1 otherwise.
(win32_wait): Don't check here if gdb sent an interrupt request.
Ensure there is a valid event to handle.
(win32_request_interrupt): Add soft interruption method as last
resort.

* win32-low.h (win32_thread_info): Add descriptions to the
structure members.  Replace `suspend_count' counter by a
`suspended' flag.
* win32-low.c (thread_rec): Update condition of when to get the
context from the inferior.  Rely on ContextFlags being set if it
has already been retrieved.  Only suspend the inferior thread if
we haven't already.  Warn if that fails.
(continue_one_thread): s/suspend_count/suspended/.  Only call
ResumeThread once.  Warn if that fails.

*** empty log message ***

* win32-low.c (win32_wait): Don't read from the inferior when it
has already exited.