2010-01-25  gingold  <gingold@adacore.com>

        * windows-nat.c (windows_continue): Use %x to print thread id.
        (get_windows_debug_event): Ditto.

PR ld/11217
* elf64-ppc.c (ppc64_elf_tls_optimize): Optimize tls sequences
with relocations against undefined weak symbols.
(ppc64_elf_relocate_section): Don't optimize calls to undefined
weak functions if the symbol is dynamic.
(ppc64_elf_relocate_section): Edit tprel tls sequences.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
(_bfd_elf_ppc_at_tprel_transform): New function.
* bfd-in.h (_bfd_elf_ppc_at_tprel_transform): Declare.
* bfd-in2.h: Regenerate.

common/
* cgen-accfp.c (fextsfdf): New arg how.  All callers updated.
(ftruncdfsf, floatsisf, flostsidf, ufloatsisf, fixsfsi, fixdfsi,
ufixsfsi): Ditto.
* cgen-fpu.h (CGEN_FPCONV_KIND): New enum.
(struct cgen_fp_ops): Update signatures of floating point conversion
operations.

frv/
* sem.c: Regenerate.

sh64/
* cpu.h: Regenerate.

* desc-cpu.scm (cgen-desc.h): Don't print virtual enums.
* sid-cpu.scm (cgen-desc.h): Ditto.
* enum.scm (enum-builtin!): New function.
* read.scm (reader-install-builtin!): Call it.
* rtl-c.scm (s-convop): Delete, replaced with ...
(s-int-convop, s-float-convop): ... new fns.
(ext, zext, trunc): Update.
(fext, ftrunc, float, ufloat, fix, ufix): Update.
* rtx-funcs.scm (fext, ftrunc, float, ufloat, fix, ufix): New parameter
`how'.
* cpu/mep-fmax.cpu (fcvtsw): Update.
* cpu/sh.cpu (h-fsd, h-fmov): Update.
* doc/rtl.texi (float-convop): Update.

* frv.cpu (floating-point-conversion): Update call to fp conv op.
(floating-point-dual-conversion, ne-floating-point-dual-conversion,
conditional-floating-point-conversion, ne-floating-point-conversion,
float-parallel-mul-add-double-semantics): Ditto.

* Make-common.in (CGEN_SIM_DEPS): Define.
(CGEN_INCLUDE_DEPS): Use it.
(CGEN_MAIN_CPU_DEPS): Simplify.

*** empty log message ***

Remove trailing { Bad_Opcode }.

daily update

Remove trailing { Bad_Opcode } in vex_len_table.

2010-01-24  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (vex_len_table): Remove trailing { Bad_Opcode }.

Remove trailing { Bad_Opcode }.

2010-01-24  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (prefix_table): Remove trailing { Bad_Opcode }.

Remove trailing "(bad)" entries and replace { "(bad)", { XX } }
with { Bad_Opcode }.

2010-01-24  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (Bad_Opcode): New.
(bad_opcode): Likewise.
(dis386): Replace { "(bad)", { XX } } with { Bad_Opcode }.
(dis386_twobyte): Likewise.
(reg_table): Likewise.
(prefix_table): Likewise.
(x86_64_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(rm_table): Likewise.
(float_reg): Likewise.
(reg_table): Remove trailing "(bad)" entries.
(prefix_table): Likewise.
(x86_64_table): Likewise.
(vex_len_table): Likewise.
(vex_w_table): Likewise.
(mod_table): Likewise.
(rm_table): Likewise.
(get_valid_dis386): Handle bytemode 0.

Set the first 3byte VEX prefix individually.

2010-01-24  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (build_vex_prefix): Set i.vex.bytes[0] to
0xc4 individually.

gdb/testsuite/
* gdb.arch/i386-bp_permanent.exp (Disassemble function '$function'):
Adjust it for DISASSEMBLY_OMIT_FNAME.

Replace "Vex" with "Vex=3" on AVX scalar instructions.

2010-01-23  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.h (VEXScalar): New.

* i386-opc.tbl: Replace "Vex" with "Vex=3" on AVX scalar
instructions.
* i386-tbl.h: Regenerated.

*** empty log message ***

daily update

Add more AVX tests.

2010-01-23  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/avx.s: Add more tests.
* gas/i386/x86-64-avx.s: Likewise.

* gas/i386/avx-intel.d: Updated.
* gas/i386/avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.

bfd/
* coff-rs6000.c (xcoff_howto_table): Change size to 0 and bitsize to 1.
(_bfd_xcoff_reloc_type_lookup): Handle BFD_RELOC_NONE.
* coff64-rs6000.c (xcoff64_howto_table): Change size to 0 and
bitsize to 1.
(xcoff64_reloc_type_lookup): Handle BFD_RELOC_NONE.

gas/
* write.h (fix_at_start): Declare.
* write.c (fix_new_internal): Add at_beginning parameter.
Use it instead of REVERSE_SORT_RELOCS.  Fix the handling of
seg_fix_tailP for the at_beginning/REVERSE_SORT_RELOCS case.
(fix_new, fix_new_exp): Update accordingly.
(fix_at_start): New function.
* config/tc-ppc.c (md_pseudo_table): Add .ref to the OBJ_XCOFF section.
(ppc_ref): New function, for OBJ_XCOFF.
(md_apply_fix): Handle BFD_RELOC_NONE for OBJ_XCOFF.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Remove #undef.

gas/testsuite/
* gas/ppc/xcoff-ref-1.s, gas/ppc/xcoff-ref-1.l: New test.
* gas/ppc/aix.exp: Run it.

ld/testsuite/
* ld-powerpc/aix-ref-1-32.od, ld-powerpc/aix-ref-1-64.od,
ld-powerpc/aix-ref-1.s: New tests.
* ld-powerpc/aix52.exp: Run them.

gcc PR libstdc++/36101, gcc PR libstdc++/42813
* configure.ac (bootstrap_target_libs): Include target-libgomp.
* configure: Regenerate.

2010-01-22  Doug Kwan  <dougkwan@google.com>

* arm.cc (Target_arm::do_relax): Record an output section for section
offset adjustment it contains any stub table that has changed.
* layout.cc (Layout::clean_up_after_relaxation): Adjust section
offsets in an output section if necessary.
* output.cc (Output_section::Output_section): Initialize
section_offsets_need_adjustments_.
(Output_section::add_input_section_for_script): Renamed to
Output_section::add_simple_input_section.
(Output_section::save_states): Add a comment.
(Output_section::discard_states): New method defintion.
(Output_section::adjust_section_offsets): Same.
* output.h (Output_section::add_input_section_for_script): Renamed to
Output_section::add_simple_input_section.
(Output_section::discard_states): New method declaration.
(Output_section::adjust_section_offsets): Same.
(Output_section::section_offsets_need_adjustment,
Output_section::set_section_offsets_need_adjustment): New method
definitions.
(Output_section::section_offsets_need_adjustment_): New data member.
* script-sections.cc
(Output_section_element_input::set_section_address): Adjust code for
renaming of Output_section::add_input_section_for_script.
(Orphan_output_section::set_section_address): Same.

*** empty log message ***

daily update

2010-01-22  Viktor Kutuzov  <vkutuzov@accesssoftek.com>

* gold/arm.cc (Target_arm): Updated fix_v4bx method and usage of
Fix_v4bx enum values .
* gold/options.h (General_options): New option definitions.
(General_options::fix_v4bx): New method.
(General_options::Fix_v4bx): New enum.
* gold/options.cc (General_options::parse_fix_v4bx): New method.
(General_options::parse_fix_v4bx_interworking): New method.

2010-01-22  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_exidx_fixup): New class.

gdb
PR symtab/11199:
* dwarf2read.c (quirk_gcc_member_function_pointer): Change return
type and arguments.  Use smash_to_methodptr_type.
(read_structure_type): Call quirk_gcc_member_function_pointer
later.
* gdbtypes.h (smash_to_methodptr_type): Declare.
* gdbtypes.c (smash_to_methodptr_type): New function.
(lookup_methodptr_type): Use it.
gdb/testsuite
2010-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

PR symtab/11199:
* gdb.dwarf2/member-ptr-forwardref.exp,
gdb.dwarf2/member-ptr-forwardref.S: New.

gcc PR libstdc++/36101, gcc PR libstdc++/42813
* configure.ac (target_configdirs): Substitute.
* Makefile.def: Bootstrap target module libgomp.
Add dependency of all-target-libstdc++-v3 on configure-target-libgomp.
* Makefile.tpl (TARGET_CONFIGDIRS): New makefile variable.
(BASE_TARGET_EXPORTS): Export TARGET_CONFIGDIRS.
* configure, Makefile.in: Regenerate.

* cgen-ops.h (SUBWORDXFSI): Fix word ordering.
(SUBWORDTFSI, JOINSIDI): Ditto.

2010-01-21  Doug Kwan  <dougkwan@google.com>

elfcpp/ChangeLog:

* arm.h (EXIDX_CANTUNWIND): New enum.

gold/ChangeLog:

* arm.cc (Arm_exidx_cantunwind, Arm_exidx_merged_section): New
classes.
(Arm_exidx_section_offset_map): New type.

2010-01-21  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_exidx_input_section): New class.
(Arm_relobj::exidx_input_section_by_link,
Arm_relobj::exidx_input_section_by_shndx,
Arm_relobj::make_exidx_input_section): New methods.
(read_arm_attributes_section): Remove.
(Arm_relobj::do_read_symbols): Look for ARM.exidx sections and record
information about them.
(Arm_dynobj::do_read_symbols): Move code in read_arm_attributes_section
to here.

*** empty log message ***

daily update

* linux-ppc-low.c (ppc_arch_setup): Adjust to regcache
          changes.

* config/te-solaris.h (DWARF2_EH_FRAME_READ_ONLY): Make read-only
on 64-bit Solaris/x86.
Include obj-format.h earlier.

gdb/gdbserver/
* linux-s390-low.c (s390_collect_ptrace_register)
(s390_supply_ptrace_register): Adjust it for the new regcache parameter.

* linux-low.c (PTRACE_ARG3_TYPE): Change from long to void*.
(PTRACE_ARG4_TYPE): New macro.
(handle_extended_wait): Cast ptrace arg4 to PTRACE_ARG4_TYPE.
(linux_wait_for_event_1, linux_resume_one_lwp): Ditto.
(fetch_register): Cast to uintptr_t before casting to PTRACE_ARG3_TYPE.
(usr_store_inferior_registers): Ditto.
(linux_read_memory, linux_write_memory): Ditto.
(linux_test_for_tracefork): Ditto.

* linux-arm-low.c: Remove redundant include of gdb_proc_service.h.
Only include elf.h if gdb_proc_service.h didn't include linux/elf.h.

Correct month.

Add xsave64 and xrstor64.

gas/testsuite/

2010-02-21  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/x86-64-xsave.s: Add tests for xsave64 and xrstor64.

* gas/i386/x86-64-xsave-intel.d: Updated.
* gas/i386/x86-64-xsave.d: Likewise.

opcodes/

2010-02-21  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (mod_table): Use FXSAVE on xsave and xrstor.

* i386-opc.tbl: Add xsave64 and xrstor64.
* i386-tbl.h: Regenerated.

PR symtab/11198:
* symtab.h (lookup_minimal_symbol_and_objfile): Declare.
* minsyms.c (lookup_minimal_symbol_and_objfile): New function.
* glibc-tdep.c (find_minsym_and_objfile): Remove.
(glibc_skip_solib_resolver): Use
lookup_minimal_symbol_and_objfile.

* proc-service.c (ps_lgetregs): Don't refetch registers from the
target.

    * elflink.c (elf_link_add_object_symbols): Look up name of
        undefined symbol both before and after versioning has been
        applied.  Do not bother with symbols that are weakly undefined.

2010-01-21  Kai Tietz  <kai.tietz@onevision.com>

        * inflow.c (check_syscall): Guard by #if clause for GO32 and
        WIN32 targets.

* spu-low.c (spu_fetch_registers, spu_store_registers): Change
  prototype to take a regcache.  Adjust.

2010-01-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* readelf.c (get_machine_flags): Handle EF_S390_HIGH_GPRS.

2010-01-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* s390.h (EF_S390_HIGH_GPRS): Added macro definition.

2010-01-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* config/tc-s390.c (s390_elf_final_processing): New function.
* config/tc-s390.h (elf_tc_final_processing): New macro definition.
(s390_elf_final_processing): Added prototype.

2010-01-21  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

* elf32-s390.c (elf32_s390_merge_private_bfd_data): New function.
(bfd_elf32_bfd_merge_private_bfd_data): New macro definition.

    PR 4437
        * ldfile.c: (ldfile_open_file): Do not stop link upon encountering
        a missing file or library.  Instead mark the entry as missing and
        set the global flag to indicate that missing files were
        encountered.
        * ldlang.c (missing_files): New exported variable.
        (load_symbols): Skip loading if the file is missing.
        (open_input_bfds): Terminate link if any input files were
        missing.
        * ldlang.h (struct lang_input_statement_struct): Add missing_file
        field.
        Add export of missing_file variable.

Improve doc on how to execute a Python script from GDB.

        * gdb.texinfo (File Options): Adjust the documentation of this
        switch to refer to the "source" command rather than partially
        duplicating some of the relevant information.
        (Extending GDB): Introduce and document the set/show script-extension
        setting.
        (Command Files): Add note explaining that the "source" command
        is also used to evalute scripts written in other languages.
        Remove the short slightly incorrect reference to sourcing Python
        scripts.
        (Python Commands): Document how to execute a Python script from GDB.

merge from gcc

*** empty log message ***

daily update

* regcache.h (struct thread_info): Forward declare.
(struct regcache): New.
(new_register_cache): Adjust prototype.
(get_thread_regcache): Declare.
(free_register_cache): Adjust prototype.
(registers_to_string, registers_from_string): Ditto.
(supply_register, supply_register_by_name, collect_register)
(collect_register_as_string, collect_register_by_name): Ditto.
* regcache.c (struct inferior_regcache_data): Delete.
(get_regcache): Rename to ...
(get_thread_regcache): ... this.  Adjust.  Switch inferior before
fetching registers.
(regcache_invalidate_one): Adjust.
(regcache_invalidate): Fix prototype.
(new_register_cache): Return the new register cache.
(free_register_cache): Change prototype.
(realloc_register_cache): Adjust.
(registers_to_string): Change prototype to take a regcache.  Adjust.
(registers_from_string): Ditto.
(register_data): Ditto.
(supply_register): Ditto.
(supply_register_by_name): Ditto.
(collect_register): Ditto.
(collect_register_as_string): Ditto.
(collect_register_by_name): Ditto.
* server.c (process_serial_event): Adjust.
* linux-low.h (regset_fill_func, regset_store_func): Change
prototype.
(get_pc, set_pc, collect_ptrace_register, supply_ptrace_register):
Change prototype.
* linux-low.c (get_stop_pc): Adjust.
(check_removed_breakpoint): Adjust.
(linux_wait_for_event): Adjust.
(linux_resume_one_lwp): Adjust.
(fetch_register): Add regcache parameter.  Adjust.
(usr_store_inferior_registers): Ditto.
(regsets_fetch_inferior_registers): Ditto.
(regsets_store_inferior_registers): Ditto.
(linux_fetch_registers, linux_store_registers): Ditto.
* i387-fp.c (i387_cache_to_fsave): Change prototype to take a
regcache.  Adjust.
(i387_fsave_to_cache, i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto.
* i387-fp.h (i387_cache_to_fsave, i387_fsave_to_cache): Change
prototype to take a regcache.
(i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto.
* remote-utils.c (convert_ascii_to_int, outreg)
(prepare_resume_reply): Change prototype to take a regcache.
Adjust.
* target.h (struct target_ops) <fetch_registers, store_registers>:
Change prototype to take a regcache.
(fetch_inferior_registers, store_inferior_registers): Change
prototype to take a regcache.  Adjust.
* proc-service.c (ps_lgetregs): Adjust.
* linux-x86-low.c (x86_fill_gregset, x86_store_gregset)
(x86_fill_fpregset, x86_store_fpregset, x86_fill_fpxregset)
(x86_store_fpxregset, x86_get_pc, x86_set_pc): Change prototype to
take a regcache.  Adjust.
* linux-arm-low.c (arm_fill_gregset, arm_store_gregset)
(arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset)
(arm_store_vfpregset, arm_get_pc, arm_set_pc):
(arm_breakpoint_at): Change prototype to take a regcache.  Adjust.
* linux-cris-low.c (cris_get_pc, cris_set_pc)
(cris_cannot_fetch_register):
(cris_breakpoint_at): Change prototype to take a regcache.
Adjust.
* linux-crisv32-low.c (cris_get_pc, cris_set_pc,
cris_reinsert_addr, cris_write_data_breakpoint): Change prototype
to take a regcache.  Adjust.
(cris_breakpoint_at, cris_insert_point, cris_remove_point):
Adjust.
* linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Change prototype to
take a regcache.  Adjust.
* linux-m68k-low.c (m68k_fill_gregset, m68k_store_gregset)
(m68k_fill_fpregset, m68k_store_fpregset, m68k_get_pc,
(m68k_set_pc): Change prototype to take a regcache.  Adjust.
* linux-mips-low.c (mips_get_pc):
(mips_set_pc): Change prototype to take a regcache.  Adjust.
(mips_reinsert_addr): Adjust.
(mips_collect_register): Change prototype to take a regcache.
Adjust.
(mips_supply_register):
(mips_collect_register_32bit, mips_supply_register_32bit)
(mips_fill_gregset, mips_store_gregset, mips_fill_fpregset)
(mips_store_fpregset): Ditto.
* linux-ppc-low.c (ppc_supply_ptrace_register, ppc_supply_ptrace_register):
Ditto.
(parse_spufs_run): Adjust.
(ppc_get_pc, ppc_set_pc, ppc_fill_gregset, ppc_fill_vsxregset)
(ppc_store_vsxregset, ppc_fill_vrregset, ppc_store_vrregset)
(ppc_fill_evrregset, ppc_store_evrregset): Change prototype to
take a regcache.  Adjust.
* linux-s390-low.c (s390_collect_ptrace_register)
(s390_supply_ptrace_register, s390_fill_gregset, s390_get_pc)
(s390_set_pc): Change prototype to take a regcache.  Adjust.
(s390_arch_setup): Adjust.
* linux-sh-low.c (sh_get_pc, sh_breakpoint_at)
(sh_fill_gregset): Change prototype to take a regcache.  Adjust.
* linux-sparc-low.c (sparc_fill_gregset_to_stack)
(sparc_fill_gregset, sparc_store_gregset_from_stack)
(sparc_store_gregset, sparc_get_pc): Change prototype to take a
regcache.  Adjust.
(sparc_breakpoint_at): Adjust.
* linux-xtensa-low.c (xtensa_fill_gregset):
(xtensa_store_gregset):
(xtensa_fill_xtregset, xtensa_store_xtregset, xtensa_get_pc)
(xtensa_set_pc): Change prototype to take a regcache.  Adjust.
* nto-low.c (nto_fetch_registers, nto_store_registers): Change
prototype to take a regcache.  Adjust.
* win32-arm-low.c (arm_fetch_inferior_register)
(arm_store_inferior_register): Change prototype to take a
regcache.  Adjust.
* win32-i386-low.c (i386_fetch_inferior_register)
(i386_store_inferior_register): Change prototype to take a
regcache.  Adjust.
* win32-low.c (child_fetch_inferior_registers)
(child_store_inferior_registers): Change prototype to take a
regcache.  Adjust.
(win32_wait): Adjust.
(win32_fetch_inferior_registers): Change prototype to take a
regcache.  Adjust.
(win32_store_inferior_registers): Adjust.
* win32-low.h (struct win32_target_ops) <fetch_inferior_register,
store_inferior_register>: Change prototype to take a regcache.

gdb/testsuite/
* gdb.threads/watchthreads-reorder.c (gdbstop_mutex): Remove.
(thread1_func): Protect thread1_tid with thread1_tid_cond by
thread1_tid_mutex.  Remove gdbstop_mutex handling.
(thread2_func): Protect thread2_tid with thread2_tid_cond by
thread2_tid_mutex.  Remove gdbstop_mutex handling.
(main): Move thread1_tid_mutex and thread2_tid_mutex locks before
pthread_create.  Remove gdbstop_mutex handling.  New comment.  Replace
pthread_cond_wait conditionalizations by while loops.

* linux-low.c (W_STOPCODE): Provide definition if missing.

* linux-low.c (linux_create_inferior): Wrap use of __SIGRTMIN in
#ifdef.
(linux_wait_for_event1, linux_init_signals): Ditto.

gdb
PR backtrace/10770:
* valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
BINOP_GEQ.  Handle BINOP_NOTEQUAL in the signed case.
* dwarf2expr.c (new_dwarf_expr_context): Allocate
dwarf_stack_values, not CORE_ADDRs.
(execute_stack_op): Change DW_OP_div and comparison operators to
use signed operands.
gdb/testsuite
PR backtrace/10770:
* gdb.dwarf2/pr10770.exp: New file.
* gdb.dwarf2/pr10770.c: New file.
* gdb.dwarf2/Makefile.in (EXECUTABLES): Add pr10770.

2010-01-20  Doug Kwan  <dougkwan@google.com>

* arm.cc (Target_arm::Arm_input_section_map): Change key type from
Input_section_specifier to Section_id.
(Target_arm::new_arm_input_section: Adjust code for change of key
type.
(Target_arm::find_arm_input_section): Ditto.
* gc.h (object.h): Include for Section_id nand Section_id_hash.
(Section_id): Remove.
(Garbage_collection::Section_id_hash): Remove.
* icf.h (object.h): Include for Section_id nand Section_id_hash.
(Section_id): Remove.
(Icf::Section_id_hash): Remove.
* object.h (Section_id, Const_section_id, Section_id_hash,
Const_section_id_hash): New type definitions.
* output.cc (Output_section::add_relaxed_input_section): Change to
use Const_section_id instead of Input_section_specifier as key type.
(Output_section::add_merge_input_section): Ditto.
(Output_section::build_relaxation_map): Change to use Section_id
instead of Input_section_specifier as key type.
  (Output_section::convert_input_sections_in_list_to_relaxed_sections):
Ditto.
(Output_section::convert_input_sections_to_relaxed_sections): Change
to use Const_section_id instead of Input_section_specifier as key type.
  (Output_section::find_merge_section): Ditto.
(Output_section::find_relaxed_input_section): Ditto.
* output.h (Input_section_specifier): Remove class.
(Output_section::Output_section_data_by_input_section_map): Change
key type to Const_section_id.
(Output_section::Output_relaxed_input_section_by_input_section_map):
Ditto.
(Output_section::Relaxation_map): Change key type to Section_id.

* gold/arm.cc: Added support for R_ARM_V4BX relocation
(class Arm_v4bx_stub): New class.
(DEF_STUBS): Updated definition to support v4_veneer_bx.
(Stub_factory::make_arm_v4bx_stub): New method.
(Stub_factory::elf32_arm_stub_v4_veneer_bx): New veneer template.
(Stub_table::empty): Handle v4bx stubs.
(Stub_table::add_arm_v4bx_stub): New method.
(Stub_table::find_arm_v4bx_stub): New method.
(Arm_relocate_functions::v4bx): New method.
(Target_arm::fix_v4bx): New method.
(Target_arm::Target_arm): Handle R_ARM_V4BX.
(Stub_table::relocate_stubs): Likewise.
(Stub_table::do_write): Likewise.
(Stub_table::update_data_size_and_addralign): Likewise.
(Stub_table::finalize_stubs):  Likewise.
(Target_arm::Scan::local): Likewise.
(Target_arm::Scan::global): Likewise.
(Target_arm::do_finalize_sections): Likewise.
(Target_arm::Relocate::relocate): Likewise.
(Target_arm::Relocatable_size_for_reloc::get_size_for_reloc):
Likewise.
(Target_arm::scan_reloc_for_stub): Likewise.
(Target_arm::scan_reloc_section_for_stubs): Likewise.

* gdb.mi/mi-async.exp: Remove check for 'async' target, because
that target was removed, and the test always runs native anyway.

Per-inferior args and tty and environment.

* infcmd.c (inferior_args): Rename to ...
(inferior_args_scratch): ... this.
(inferior_io_terminal): Rename to ...
(inferior_io_terminal_scratch): ... this.
(inferior_argc, inferior_argv): Remove.
(set_inferior_io_terminal, get_inferior_io_terminal): Store
inside current_inferior().
(set_inferior_tty_command, show_inferior_tty_command): New.
(get_inferior_args, set_inferior_args): Store inside
current_inferior().
(notice_args_set): Likewise and rename to...
(set_args_command): ... this.
(set_inferior_args_vector): Likewise.
(notice_args_read): Rename to...
(show_args_command): ...new.
(tty_command): Remove.
(run_command_1): Don't free old args, as they are freed by
set_inferior_arg now.
(run_no_args_command): Likewise.
(inferior_environ): Remove.
(run_command_1): Use environment of the current inferior.
(environment_info, set_environment_command)
(unset_environment_command, path_info, path_command): Likewise.
(_initialize_infcmd): Adjust for function and variable renames.
Do not init inferior_environ.
* inferior.h (set_inferior_arg): Adjust prototype.
(struct inferior): New fields args, argc, argv, terminal, environment.
(inferior_environ): Remove declaration.
* inferior.c (free_inferior): Free new fields.
(add_inferior_silent): Initialize 'environment' field.
* main.c (captured_main): Set arguments only after the initial
inferior has been created.  Set set_inferior_io_terminal,
not tty_command.
* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
inferior.
(_initialize_mi_cmd_env): Adjust for disappearance of global
inferior_environ.
* solib.c (solib_find): Use environment of the current inferior.

Add changelog entries for PR 11109.  Patch itself was accidentally committed earlier.
Remove Spurious whitespace in ChangeLog-2009.

    PR 11170
        * arm-dis.c (print_arm_address): Do not ignore negative bit in PC
        based post-indexed addressing.

gdb/
* varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
HAVE_PYTHON.
(instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.

* m32c.opc (MATH_OP): When doing subtraction, also set carry if
the result is zero.

Get rid of ada-lang.c:function_name_from_pc.

        * ada-lang.c: Add "stack.h" #include.
        (function_name_from_pc): Delete.
        (is_known_support_routine): Replace call to function_name_from_pc
        by call to find_frame_funname.
        (ada_unhandled_exception_name_addr_from_raise): Likewise.

PR c++/11026:
* dwarf2read.c (read_partial_die): Allocate partial DIE's name on
objfile obstack.

binutils/:
* objcopy.c (copy_main): Rewrite OPTION_ADD_SECTION code to work
with non-ordinary files like /dev/null.
binutils/testsuite/:
* lib/utils-lib.exp (run_dump_test): Permit option values to use
$srcdir to refer to the source directory.
* binutils-all/add-section.d: New test.
* binutils-all/add-empty-section.d: New test.
* binutils-all/empty-file: New test input file.
* binutils-all/objcopy.exp: Run new tests.

*** empty log message ***

* dwarf2.c (read_attribute_value): Add DW_FORM_ref_sig8.

daily update

* top.c (stop_sig, float_handler, do_nothing): Remove.

gdb/
* breakpoint.c (watchpoint_check): Check the call
gdbarch_in_function_epilogue_p before calling frame_find_by_id.
Extend the comment.
* config/djgpp/fnchange.lst: Add translations for
watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
watchpoint-cond-gone-stripped.c.

gdb/testsuite/
* gdb.base/watchpoint-cond-gone.exp, gdb.base/watchpoint-cond-gone.c,
gdb.base/watchpoint-cond-gone-stripped.c: New.

gdb
PR c++/8000:
* dwarf2read.c (partial_die_parent_scope): Put enumeration type
into parent scope, and enumerator into grandparent scope.
gdb/testsuite
PR c++/8000:
* gdb.cp/namespace.exp: Use new enum.  Fix line numbers in
existing tests.
* gdb.cp/namespace.cc (AAA::SomeEnum): New enum.
(main): Use AAA::SomeEnum.

elfcpp/:
* elfcpp.h (PN_XNUM): Define.
gold/:
* output.cc (Output_section_headers::do_sized_write): Write large
segment count to sh_info field.
(Output_file_header::do_sized_write): For large segment count,
write PN_XNUM to e_phnum field.

    * readelf.c (process_file_header): Handle e_phnum extension.

    * elfcode.h (elf_swap_ehdr_out): Handle e_phnum > 0xffff.
(elf_object_p): Read e_phnum extension.
(elf_write_shdrs_and_ehdr): Write e_phnum extension.
        * elfcore.h (elf_core_file_p): Read e_phnum extension.  Sanity check
that we can read last program header.

    * common.h (PN_XNUM): Define.

    * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.

Fix typo in GDB documentation.

        * gdb.texinfo (Command Files): Fix typo.

Add configure handling of  x86_64-*-solaris2.1[0-9]*

        * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
        i[34567]86-*-solaris2.1[0-9]*.
        * configure.tgt: Likewise.

    * NEWS: Document the source command enhancement allowing it
        to load Python scripts. Document the "set/show script-extension"
        commands.

Add -Wunused-function to compile flags.

        * configure.ac: Add -Wunused-function to build_warnings.
        * configure: Regenerate.

"delete" ada-lex.c:input function, not used.

        * ada-lex.l: #define YY_NO_INPUT.

Delete free_named_symtabs and associated cleanup.

        * symfile.h (free_named_symtabs): Delete declaration.
        * symfile.c: Remove some commented out code (clear_symtab_users_once).
        (cashier_psymtab): Comment function out.
        Delete declaration.
        (free_named_symtabs): Delete.
        * coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
        * dbxread.c (end_psymtab): Likewise.
        * dwarf2read.c (process_psymtab_comp_unit): Ditto.
        * exec.c (exec_close_1): Ditto.
        * xcoffread.c (xcoff_end_psymtab): Likewise.

Comment out unused function.

The function is being commented out instead of deleted because this function
is used by some code which is itself commented out.  It is unclear which
the latter was commented out.

        * stack.c (print_block_frame_labels): Comment function out.

Delete unused or undefined functions.

        * breakpoint.c (ep_parse_optional_filename): Delete.
        * dcache.c (dcache_write_line): Remove declaration.
        * infrun.c (build_infrun): Remove declaration.
        * tracepoint.c (tracepoint_save_command): Remove declaration.
        * linux-nat.c (init_lwp_list): Delete. No longer used.
        * event-loop.c (check_async_signal_handlers): Delete declaration.
        * infrun.c (init_execution_control_state): Delete.
        (proceed): Update comment to avoid mentioning
        init_execution_control_state.
        * target.c (kill_or_be_killed, nosupport_runtime): Delete.
        * ada-lang.c (ada_to_static_fixed_value): Delete.
        * scm-lang.c (evaluate_subexp_scm): Delete declaration.
        * cp-namespace.c (cp_copy_usings): Delete.
        * xml-syscall.c (xml_number_of_syscalls): Delete.
        * progspace.c (find_program_space_by_num): Delete.
        * inflow.c (handle_sigio): Delete declaration.
        * hppa-tdep.c (hppa_alignof): Delete.
        * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
        (mipsnbsd_core_osabi_sniffer): Delete.

2010-01-18  Tristan Gingold  <gingold@adacore.com>

* config/tc-ia64.c (ia64_vms_note): Generate 24 bytes note headers.

gdb/testsuite/
* gdb.mi/mi-break.exp (set line_callme_head, set line_callme_body): New.
(test_ignore_count): Declare line_callme_body global.
(run to breakpoint with ignore count): Use line_callme_body.
* gdb.mi/mi-cli.exp (set line_main_head, set line_main_body)
(set line_main_hello, set line_main_return): Reindent.
(set line_callee4_head, set line_callee4_body, set line_callee4_next):
New.
(continue to callee4): Use line_callee4_body.
(check *stopped from CLI command): Use line_callee4_next.
* gdb.mi/mi2-cli.exp (set line_main_head, set line_main_body)
(set line_main_hello, set line_main_return): Reindent.
(set line_callee4_head, set line_callee4_body): New.
(continue to callee4): Use line_callee4_body.

* elf32-arm.c (elf32_arm_howto_table_1): Correct bitsize of
R_ARM_THM_CALL entry.
(elf32_arm_final_link_relocate): Correct calculation of
reloc_signed_max when doing a R_ARM_THM_CALL, R_ARM_THM_XPC22,
or R_ARM_THM_JUMP24 relocation.

*** empty log message ***

daily update

gdb
PR c++/9680:
* c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
(CONST_CAST): New tokens.
(exp): Add new productions.
(ident_tokens): Add const_cast, dynamic_cast, static_cast, and
reinterpret_cast.
(is_cast_operator): New function.
(yylex): Handle cast operators specially.
* eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
UNOP_REINTERPRET_CAST>: New cases.
* expprint.c (print_subexp_standard): Likewise.
(op_name_standard): Likewise.
(dump_subexp_body_standard): Likewise.
* parse.c (operator_length_standard): Likewise.
* expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
UNOP_REINTERPRET_CAST.
* gdbtypes.c (class_types_same_p): New function.
(is_ancestor): Use it.
(is_public_ancestor): New function.
(is_unique_ancestor_worker): Likewise.
(is_unique_ancestor): Likewise.
* gdbtypes.h (class_types_same_p, is_public_ancestor)
(is_unique_ancestor): Declare.
* valops.c (value_reinterpret_cast): New function.
(dynamic_cast_check_1): Likewise.
(dynamic_cast_check_2): Likewise.
(value_dynamic_cast): Likewise.
* value.h (value_reinterpret_cast, value_dynamic_cast): Declare.
gdb/testsuite
PR c++/9680:
* gdb.cp/casts.cc: Add new classes and variables.
* gdb.cp/casts.exp: Test new operators.

Fix build failure when building without Python support.

        * python/python.c: Always include exceptions.h, even when HAVE_PYTHON
        is not defined.

Use XVS field type instead of doing a parallel lookup.

        * ada-lang.c (ada_get_base_type): Follow the XVS field type
        if it is a reference type instead of doing a type lookup using
        the XVS field name.

    Trust PAD types instead of using PAD___XVS.
        * ada-lang.c (trust_pad_over_xvs): New static variable.
        (ada_is_aligner_type): If !trust_pad_over_xvs and there is a
        parallel XVS type, follow the XVS type instead of the PAD type.
        (unwrap_value): Make sure that there is no parallel XVE type
        before returning the value as is.
        (set_ada_list, show_ada_list): New static variables.
        (set_ada_command, show_ada_command): New functions.
        (_initialize_ada_language): Add new "set/show ada" prefix commands.
        Add new "set/show ada trust-PAD-over-XVS" setting.

PR 11168
* coffcode.h (coff_compute_section_file_positions): Move Rs6000COFF_C
block past vars in COFF_IMAGE_WITH_PE block.  Report error on more
than 32k sections.

    * gdb.python/source2.py: New file.
        * gdb.python/source1: New file.
        * gdb.python/python.exp: Test "source" command.

    * gdb.texinfo (File Options): Document -x on .py files.
        (Command Files): Document handling of Python scripts.

Allow "source" to load python scripts.

        * exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
        * python/python.c (source_python_script): New function.
        * python/python.h (source_python_script): Add declaration.
        * cli/cli-cmds.c: #include exceptions.h and python/python.h.
        (script_ext_off, script_ext_soft, script_ext_strict)
        (script_ext_enums, script_ext_mode): New static constants.
        (show_script_ext_mode, find_and_open_script): New functions.
        (source_script): Enhance to handle Python scripts.
        (init_cli_cmds): Add set/show script-extension commands.

* Makefile.in (ANNOTATE_DOC_BUILD_INCLUDES): Add GDBvn.texi.

Cannot build mips simulator on darwin.

        Masaki Muranaka  <monaka@monami-software.com>  (tiny change)
        * interp.c: Don't include sysdep.h

*** empty log message ***