qt5quickcontrols: fix installation of PrivateWidgets

Commit e482ebf51d9e8e00c3e58eb65af0dfb70d05d8cc attempted to fix the
installation of qt5quickcontrols by only installing the PrivateWidgets
directory for the 5.8.0 version.

However, the availability of PrivateWidgets has nothing to do with the
version; in both 5.6.2 and 5.8.0, the installation is gated by the
following statement in src/src.pro:

qtHaveModule(quick):qtHaveModule(widgets): SUBDIRS += widgets

i.e. it is installed when both the Quick and the Widgets module are
available. The Widgets module is controlled by Buildroot's
BR2_PACKAGE_QT5BASE_WIDGETS symbol, the Quick module is controlled by
Buildroot's BR2_PACKAGE_QT5DECLARATIVE_QUICK. The qt5quickcontrols
package selects BR2_PACKAGE_QT5DECLARATIVE_QUICK so it is not really
needed to include it in the condition. However, it is theoretically
possible to build this package without QtQuick. Also, adding this
condition makes it consistent with src.pro.

Note that commit e482ebf51d9e8e00c3e58eb65af0dfb70d05d8cc introduces a
second fix (not mentioned in the commit message): for version 5.6.2, the
Layouts directory is installed, but in 5.8.0 this directory doesn't
exist any more. Therefore, a separate condition on the version is still
needed.

Fixes:
http://autobuild.buildroot.net/results/1ff3e9ad4ba518d0a37f9fc12038bf9020f28094

Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

genimage: Fix typo in description

Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

classpath: only allow on supported architectures

In commit a75ab1fc1dcc7eee8668b1c3c19b703f1390b2cd ("package/classpath:
Don't depend on jamvm"), we removed the dependency of classpath on
jamvm. Since jamvm is only available for a reduced set of architectures,
classpath could until this commit until be built on those architectures.

However, now that this dependency has been removed, classpath can
potentially be built for all architectures supported by Buildroot, even
though it doesn't support all of them.

Since adding support for additional architectures in classpath doesn't
make much sense, because classpath is in Buildroot only usable with
JamVM anyway, and JamVM is only available for a small set of
architectures, this commit simply makes classpath available on the
architectures that it supports.

By doing so, it also removes the or1k support patch which was added by
commit f12a146f817c8ef07a7d41a31a5336b5ef6a96e8, since anyway or1k is
not supported by JamVM.

Fixes:

  http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/
  (classpath on microblaze)

  http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/
  (classpath on nios2)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openocd: avoid documentation rebuild to fix build issues

On PowerPC64(le), we patch all configure scripts. Due to this, the
version.texi in OpenOCD files gets regenerated, and then since it has
a newer date than openocd.info, openocd build system rebuilds the
documentation. Unfortunately, this documentation rebuild fails on old
machines.

We work around this by faking the date of the generated version.texi
file, to make the build system believe the documentation doesn't need
to be regenerated.

Fixes:

  http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dependencies/cmake: blacklist cmake 3.7

cmake-3.7 has a bug in how it handles rpath, linking with libraries from
the host.

Until we completely understand the issue, just blacklist cmake-3.7.

The issue has been reported upstream:
    http://public.kitware.com/pipermail/cmake/2017-February/064970.html

Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

assimp: fix gcc version condition

In commit 68cebedeb977396f64f5f591f5e93f34fab8e0a8 ("assimp: work around
gcc bug on SuperH"), a work around was added to make the package build
with gcc on SuperH. The condition included a test on the gcc version,
which was mistakenly done on the host gcc version, while a test on the
target gcc version was intended.

Thanks to Peter Korsgaard for spotting the issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

assimp: work around gcc bug on SuperH

gcc versions earlier than gcc 6.x fail to build assimp on SuperH when
static linking:

  AssxmlExporter.cpp:623:1: error: unable to find a register to spill in class 'GENERAL_REGS'

It's the combination of -Os and *not* having -fPIC that makes gcc
fail, which explains why configurations with dynamic linking work
fine.

 -Os -fPIC -> works
 -Os       -> fails
 -O2 -fPIC -> works
 -O2       -> works

Therefore, as a workaround, we are forcing the use of -O2 on SuperH
when the gcc version is older than gcc 6.x and we're statically
linking.

Fixes:

  http://autobuild.buildroot.net/results/ec88aa8118179e30e24603cc45292047dca19216/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

assimp: remove dead "depends on" dependency

BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX has been removed in commit
311bc137da2952445683413794f3ebc8e477c9ef ("toolchain: kill ADI
Blackfin toolchain"), so this "depends on" is useless.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vlc: workaround microblaze gcc internal compiler error

Override gcc optimization flags with -O0. The workaround is not required
for gcc6 anymore, so we take this into account into our condition.

Fixes:

  http://autobuild.buildroot.net/results/a318f0838a6a602046e719103ac81965c0084d52

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add gcc 6.x condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mplayer: not supported on or1k

MPlayer doesn't support OpenRISC:

The architecture of your CPU (or1k) is not supported by this configure script
It seems nobody has ported MPlayer to your OS or CPU type yet.

so disable it on this architecture.

Fixes:

  http://autobuild.buildroot.net/results/47207dfd10ff6e5ec4ccdcf8454aaf5f408ad1e3/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-libconfig: disable on musl

The python-libconfig package fails to build with musl with very weird
errors coming all the way from Boost Python, which nobody ever
bothered to fix. It's time to disable this package on musl to avoid
the repetitive build failures.

Fixes:

  http://autobuild.buildroot.net/results/f0f6cdc8c38c024772615d5e677b0f4ad63ef7ec

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update for 2017.02-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuv: add dependency on BR2_TOOLCHAIN_HAS_SYNC_4

The libuv library uses __sync atomic built-ins:

$ readelf -a -W output/target/usr/lib/libuv.so.1.0.0 | grep __sync
   122: 00000000     0 NOTYPE  GLOBAL DEFAULT  UND __sync_val_compare_and_swap_4

but this is not currently taken into account in the libuv package,
causing some build failures in packages using libuv as an optional
dependency, such as janus-gateway and mosquitto.

Therefore, this commit updates the libuv package with this additional
dependency.  The reverse dependencies of libuv are also updated: luv, luvi
and moarvm.

Fixes:

 - http://autobuild.buildroot.net/results/bdaa67d763c0d8d377a04529c74f73bee7d4ccef/
   (janus-gateway)

 - http://autobuild.buildroot.net/results/2bc84ba2d1167018e2d48e5183ead22b6425dcf5/
   (mosquitto)

[Peter: drop cmake changes after cmake revert]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

htop: work-around old uClibc issue when static linking

htop wants to use backtrace() support from the C
library. Unfortunately, with old uClibc versions such as the one we
use for the ARC architecture, the backtrace() implementation is in
libubacktrace. In addition, this implementation needs dladdr()
support, which is in libdl, not available when static linking.

Since this problem no longer exists in more recent versions of uClibc,
we simply special case the ARC+static linking case, and make the
configure script believe that <execinfo.h> is not available.

Fixes:

  http://autobuild.buildroot.net/results/cdea351fad7a0f61ddec3e6a141da8da0523a902/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-cmake: pass <pkg>_CONF_ENV for the target configure step

The Buildroot manual documents that <pkg>_CONF_ENV is passed in the
environment when calling cmake during the configure step. However, the
actual implementation in pkg-cmake passes HOST_<pkg>_CONF_ENV when
configuring the host variant of a cmake package, but does not pass
<pkg>_CONF_ENV when configuring the target variant of a cmake package.

This commit fixes that by passing <pkg>_CONF_ENV in the environment as
expected. It should not cause any behavior change, because this
feature is in fact not used by any package in upstream Buildroot:

$ grep CONF_ENV $(git grep -l cmake-package package/)
package/pkg-cmake.mk:$(2)_CONF_ENV ?=
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \

This issue was reported by Olivier <ovalentin@awox.com> as bug #9616.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "cmake: bump version to 3.7.0"

cmake 3.7 causes serious regressions in some cmake-based packages,
related to how RPATH is handled.

This reverts commit 1ffcf364b6e9894a876dc581a090f87685945412.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "cmake: bump version to 3.7.1"

cmake 3.7 causes serious regressions in some cmake-based packages,
related to how RPATH is handled.

This reverts commit d96fafc3d346af8790df45557b16069d6ce81e79.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "cmake: adjust dependencies added for libuv"

cmake 3.7 causes serious regressions in some cmake-based packages,
related to how RPATH is handled.

This reverts commit b754237520a4795eadc0edec768b267dd598ab0e.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "cmake: bump version to 3.7.2"

cmake 3.7 causes serious regressions in some cmake-based packages,
related to how RPATH is handled.

This reverts commit f8a6990c92451dab2ff9e14f3e94fdecbd79b604.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/directfb: disable for static builds

DirectFB is written in C++, but can be linked to by a C library or
program.

When doing shared link, this is fine because the linker gets help from
the DT_NEEDED flags and knows what libraries to pull in during the link.

However, during a static link, the linker does not get such help.

Properly fixing this would require that there is support in pkg-config
and autotools to specify that the C++ runtime must be linked. Alas there
is no sush support. The only option is to add -lstdc++ to the
Libs.Private field in directfb.pc. But this is not upstreamable, because
there are other C++ runtimes in the wild (e.g. -lc++ from llvm/clang).

However, DirectFB in a static scenario is probably not a very common
scenario.

Disable DirectFB for static builds.

Fixes:
    http://autobuild.buildroot.org/results/3d3/3d3036d40ddad71d872d910aae7a24975706d2e9/
    http://autobuild.buildroot.org/results/d1c/d1c35a6003396942b584f2f2a5e8bf4ac2fbe370/
    http://autobuild.buildroot.org/results/d45/d4504871bd47930e8363032d380cdfcc5bb8aee7/
    [...]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/misc/Vagrantfile: reorganize provisioning

* Remove distribution upgrade cause it slows down the first boot and
  presents a bug when executed non interactively.

* Reorganize provision scripts to be in privileged and non privileged
  sections

* Add Ubuntu mirror automatic handling for apt packages sources

Fixes bug #9581

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

classpath: add patch to fix or1k compile error

Fixes:
  http://autobuild.buildroot.net/results/a0bb5535fd197b9dd1607a5f0bca477c9575c99f

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: remove BR2_PACKAGE_NCURSES_TARGET_{FORM, MENU, PANEL} options

The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).

This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.

Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.

When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:

 - Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
   libmenu.so exists in staging), but would fail to run at runtime
   because libmenu.so is not in the target.

 - Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
   libmenuw.so exists, and not the libmenu.so symbolic link.

Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.

In detail, this commit:

 - Removes the NCURSES_PROGS variable, not needed since
   --without-progs already allows to disable the build and
   installation of programs.

 - Removes the NCURSES_LIBS-y variable, and replaces it with a single
   unconditional assignement to NCURSES_LIBS, only used to create the
   lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
   enabled.

 - Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
   calling: NCURSES_INSTALL_TARGET_LIBS and
   NCURSES_INSTALL_TARGET_PROGS.

 - Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
   tset symbolic link, as was done before.

 - Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
   files in the target, so that we stay in the same situation in terms
   of installed terminfo files.

 - Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
   from the Config.in files: both their definition and usage.

 - Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
   as Yann E. Morin suggested, this dance is only needed in staging, not
   in the target. Once binaries have been built, they refer to the
   SONAME of the library, which is the lib<foo>w variant (for shared
   linking). For static linking and .pc files, it's obvious that we
   don't care about them on the target. Therefore the
   NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
   NCURSES_LINK_PC functions no longer take any argument: they always
   apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.

It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:

 - If they were disabled before this patch, having them in
   Config.in.legacy would not trigger the legacy warning.

 - If they were enabled before this patch, then the behavior is
   unchanged: all libraries are now unconditionally installed. So
   there is no point in warning the user.

We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.

This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.

Fixes:

  http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.9.13

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssh: Move key generation to the start function of init script.

Since there's not much point in generating missing host keys when the
init script is called with "stop", the call to ssh-keygen should not
be done inconditionally, but in the start function instead.

Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.9.12

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xfsprogs: fix static build

xfsprogs links to some libraries from util-linux. Those in turn may use
i18n functions when locales are enabled.

When doing a uClibc build, those i18n functions are provided by the
libintl library from the gettext package.

xfsprogs does not use pkgconfig to find the util-linux libraries, so it
misses the Requires.private field from libblkid, and thus misses the
Libs.private field from libuid.

And so a static link fails because of undefined references to i18n
symbols.

Furthermore, xfsprogs does not use automake; the hand-made Makefiles do
not make use of the LIBS variable set by configure.

We fix that in two ways:

  - pass LIBS=-lintl to configure, so that the configure step has a
    chance to succeed  (as suggested by Waldemar)

  - patch a Makefile to link with EXTRALIBS, and pass EXTRALIBS via
    XFSPROGS_MAKE_OPTS

Fixes:
    http://autobuild.buildroot.org/results/503/50314716a9f72e8bb238e52e9dc342c68f7e0b8b/
    http://autobuild.buildroot.org/results/253/253a024698b55dece992b2631e30edf4ff9092f7/
    http://autobuild.buildroot.org/results/3fe/3fe0d96cf13af12b0051a95f7865d4e38f4a78af/
    http://autobuild.buildroot.org/results/d48/d48e61785d25d33106b7dab1b5cb200cf27d4044/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpcap: sparc needs -fPIC as sparc64/microblaze

Fixes nmap build for sparc.

Fixes:
 http://autobuild.buildroot.net/results/8e476939f1daaa20c316dbd0508fa343034f2397

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

synergy: Fix build with gcc 6

Fixes:
http://autobuild.buildroot.net/results/05b/05bbc22dd6cd5564462226e612ab1e95778fe935/
http://autobuild.buildroot.net/results/edf/edfe58749d1b7a1bb2e0184a6824a74b9d38ddb9/
http://autobuild.buildroot.net/results/139/1395eca13ca537bde928ddd68a5bc6e130e82ba3/
http://autobuild.buildroot.net/results/94a/94ad6e8bbbeb926ea834d9d6e3ba87d0398acb86/

Gcc 6.x defaults to C++14, and the iostream operator bool behaviour changed
in C++11.  In previous versions, a somewhat odd operator void* was used to
return the status of the stream as a pointer.  Since C++11 a more sensible
operator bool is used to return the stream staus.

For details, see:

http://en.cppreference.com/w/cpp/io/basic_ios/operator_bool

The code in CConfigReadContext assumes the pre-C++11 behaviour and provides
its own operator void overload to return the status of the embedded
iostream.  With C++11, iostream no longer provides this overload, breaking
the build:

CConfig.cpp: In member function 'CConfigReadContext::operator void*() const':
CConfig.cpp:1851:9: error: cannot convert 'std::istream {aka std::basic_istream<char>}' to 'void*' in return
  return m_stream;

To fix it, backport part of upstream commit 3d963bfbe7897d0a33ad (possible
fix for mavericks) which changes the code to simply provide a getStream()
method which returns a reference to the embedded stream and the calling code
is changed to use operator bool on the returned stream, making the code
compatible with both old and new compilers.

This upstream commit is part of the 1.6.0 release, so can be dropped when
the version is bumped.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix for ld segfault for microblaze when --gc-sections is used

The workarounds for kmod/libnss can be removed when the patch is
applied and the autobuilder toolchains got rebuild.

kmod: 0d81107f021bf2a663f102bace1e3f9590641170
libnss: fceb1afd5dda45cf180f22877a6ab0e51d1b3dac

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/oracle-mysql: fix path to systemd service file

The path is a remnant from before the rename of the package.

Rather than hard-code the path, use the available variable. Also use
that variable when copying the Sys-V init script.

Fixes:
    http://autobuild.buildroot.org/results/767/767f0be3894c45c1e6d18bc4528d0da7b50e3757/
    http://autobuild.buildroot.org/results/e93/e934683ebcb33c9cc8fe9de7b1d5dcd7866f3bce/
    http://autobuild.buildroot.org/results/5d0/5d04163de80f7900d4aed14cff75b2e0761f101d/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: install libanl.so for glibc

libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h

Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibc: install libanl.so to target

libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h

Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: re-add <pkg>_AUTORECONF = YES

Commit a5015f1025a1aee173c2c2ab39ccac5ce38f30c3 ("util-linux: security
bump to version 2.29.2") incorrectly removed <pkg>_AUTORECONF = YES.

While the patches touching configure.ac have indeed been removed, there
is still a patch touching a Makemodule.am file, which triggers an
autoreconf a build time, which itself fails because autoconf/automake
are not available.

So re-add <pkg>_AUTORECONF, with a comment pointing specifically at the
patch that makes it necessary.

Fixes:

  http://autobuild.buildroot.net/results/309127a532eed00e406bbaf0b1a51b7241a10505/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/atmel/readme.txt: fix typos

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libepoxy: needs host-pkgconf

configure.ac uses PKG_CHECK_MODULES() so it needs host-pkgconf.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python: apply unicode config to host build

Currently the host build of Python 2 defaults to narrow unicode (UCS2),
ignoring the BR2_PACKAGE_PYTHON_UCS4 configuration option which may be
set to wide (UCS4).

This results in host and target Python packages which are incompatible
in subtle ways.

For example, installing wheels into the target fails when they are made
with the host python, citing incompatibility (as can be seen by the
package tags which may be "cp27u-manylinux1" instead of
"cp27mu-manylinux1").

Compiling the host Python 2 with the same UCS configuration as the
target ensures that the packages are compatible (and the tags match).

This does not affect Python 3 as support for narrow unicode was
deprecated in version 3.3, see https://www.python.org/dev/peps/pep-0393/

Thanks to Tony Breeds <tony@bakeyournoodle.com> for reporting this.

Signed-off-by: Chris Smart <mail@csmart.io>
[Thomas: add comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst-omx: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-validate: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-rtsp-server: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: security bump to version 1.10.4

It updates to the ffmpeg 3.2.4 codebase, fixing several security bugs.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-ugly: security bump to version 1.10.4

Fixes:
CVE-2017-5847 - The gst_asf_demux_process_ext_content_desc function in
gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote
attackers to cause a denial of service (out-of-bounds heap read) via vectors
involving extended content descriptors.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-bad: security bump to version 1.10.4

Fixes:
CVE-2017-5848 - The gst_ps_demux_parse_psm function in
gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows
remote attackers to cause a denial of service (invalid memory read and
crash) via vectors involving PSM parsing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-good: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-plugins-base: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: bump to version 1.10.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sslh: fix a patch, drop the other

It turned out that the troll character U+c2a0 was added by our own
patch.

So fix it amd drop our second patch.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

btrfs-progs: don't use <execinfo.h> with uClibc

This commit adds a patch to btrfs-progs that fixes the build of
docker-engine, and possibly other packages including kerncompat.h from
btrfs-progs.

For the btrfs-progs build itself, a --disable-backtrace option allows to
indicate whether backtrace()/<execinfo.h> support should be used or
not. However, once btrfs-progs is installed, it simply looks at whether
__GLIBC__ is defined or not to decide to use backtrace() or not.

However, uClibc defines __GLIBC__ but does not provide backtrace()
functionality. The additional patch tweaks the kerncompat.h to look at
__UCLIBC__ and not use backtrace() functionality in this case.

Fixes:

  http://autobuild.buildroot.net/results/9dc9370a79c5c44e6c92be6a44334842c211d923/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bctoolbox: remove redundant mbedtls dependency

Fixes:

  Makefile:532: *** mbedtls is in the dependency chain of bctoolbox that
  has added it to its _DEPENDENCIES variable without selecting it or
  depending on it from Config.in.  Stop.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

trousers: update ARC comment

Update the comment about the ARC exception to match the one used in VLC,
so that a 'git grep "ARC toolchain issue"' returns the list of packages
to re-evaluate on ARC when the ARC toolchain gets upgraded.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vlc: disable on ARC

This package fails when building for ARC due to ARC toolchain issue.

Marking this with special comment "# ARC toolchain issue" as the package
is to be enabled as soon as the issue with the ARC toolchain is
resolved.

Fixes:

  http://autobuild.buildroot.net/results/ebae0ed90b88db5a3b34a46f2ca1ff97e01fe83c/

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas:
 - add autobuilder reference
 - propagate dependency to Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webkit: disable for MIPS soft-float

It assumes the MIPS target has an FPU and uses FPU assembler
instructions which cause the compilation to fail when building it for
soft-float.

Fixes:
  http://autobuild.buildroot.net/results/f40/f407ca9245e2445619420a9dfd595856729a2b2b/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
 - propagate dependency to Config.in comment
 - add comment above the "depends on" to explain why.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sslh: fix script, does not build in parallel

The Makefile is not parallel-safe, so we build with MAKE1. Since the
source is very small, this has minor impact on performance.

The genver.sh script contains a troll character U+c2a0 (non-break space)
which is refused by some versions of /bin/sh. Patch it away.

Fixes:
    http://autobuild.buildroot.net/results/867/867c74ed74fd04ab06d1a10ff34ca177fe005fd2/
    http://autobuild.buildroot.net/results/f97/f971629bc99147f9014e52c6ef71c3417faa6b67/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libimxvpuapi: bump to version 0.10.3

Because with libimxvpuapi older than 0.10.3, the gst1-imx-0.12.3 "imxvpu"
plugin will not build.

Changelog:
* properly pass on color format in simplified JPEG encoder interface
* add alternative write-callback-style encoding mode
  also add encode example variant which uses write-callback style output
* add support for "fake grayscale mode" in encoders
  this is done by using I420 internally and filling the U and V planes
  with 0x80 bytes
* make sure JPEG quantization table is copied in standardized zig zag order
  the VPU does not, so this has to be done explicitely

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

poco: doesn't support openrisc

Fixes:
http://autobuild.buildroot.net/results/5b3/5b3fd6d4a7bdefadba89fdb53de4ba786f4df9e2/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: security bump to version 7.53.0

Fixes CVE-2017-2629 - curl SSL_VERIFYSTATUS ignored

>From the advisory (http://www.openwall.com/lists/oss-security/2017/02/21/6):

Curl and libcurl support "OCSP stapling", also known as the TLS Certificate
Status Request extension (using the `CURLOPT_SSL_VERIFYSTATUS` option). When
telling curl to use this feature, it uses that TLS extension to ask for a
fresh proof of the server's certificate's validity. If the server doesn't
support the extension, or fails to provide said proof, curl is expected to
return an error.

Due to a coding mistake, the code that checks for a test success or failure,
ends up always thinking there's valid proof, even when there is none or if the
server doesn't support the TLS extension in question. Contrary to how it used
to function and contrary to how this feature is documented to work.

This could lead to users not detecting when a server's certificate goes
invalid or otherwise be mislead that the server is in a better shape than it
is in reality.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.9.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.{4, 9}.x and 3.2.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: security bump to version 2.29.2

From https://www.kernel.org/pub/linux/utils/util-linux/v2.29/v2.29.2-ReleaseNotes

This release fixes su(1) security issue CVE-2017-2616:

  It is possible for any local user to send SIGKILL to other processes with root
  privileges.  To exploit this, the user must be able to perform su with a
  successful login.  SIGKILL can only be sent to processes which were executed
  after the su process.  It is not possible to send SIGKILL to processes which
  were already running.

Drop upstream patches and autoreconf since it's no longer required.

[Peter: extend commit message with CVE info / description]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

berkeleydb: workaround m68k/coldfire issue

Fixes:
 http://autobuild.buildroot.net/results/40423aa6c8f6fe66c771cca3e09b21e15525eb5f

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rename BERKELEYDB_CONF_OPTS to BERKELEYDB_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc-ng-test: pass LDFLAGS while building

When static linking is in use we need to pass -static while
linking.

Fixes:
  http://autobuild.buildroot.net/results/37ca35854a36fab1690f6ae789e338a1e55307f6

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: disable qt-5.8.0 support for arc, nios2 and xtensa

Fixes [1], [2], [3]:

  ../3rdparty/double-conversion/include/double-conversion/utils.h:81:2: error: #error Target architecture was not detected as supported by Double-Conversion.

[1] http://autobuild.buildroot.net/results/ce6/ce6f506f610434dff1d0eb64644be0200d7c52f6
[2] http://autobuild.buildroot.net/results/fda/fda8a5165cc599adfa4b3cb012916fa4dc38aeca
[3] http://autobuild.buildroot.net/results/779/779fd562c28f3a47f9caea7d0e0cb1dcda7fe489

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/website: Speedup javascript query

This commit limits results from the javascript query for selecting
messages from the mailing list.  It was not limited before.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Update for 2017.02-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: add patches for or1k specific gcc version

This commit adds a number of patches from package/gcc/5.4.0 to
package/gcc/musl-5.4.0, so that they apply to the or1k specific gcc
version. All patches from package/gcc/5.4.0 that are not architecture
specific and not related to the musl C library have been added to
package/gcc/musl-5.4.0/.

Note that doing a symbolic link does not work, as some patches from
package/gcc/5.4.0 do not apply as-is to the or1k gcc version.

The most important patch is 850-libstdcxx-uclibc-c99.patch, which fixes
a number of build issues.

Fixes:

  http://autobuild.buildroot.net/results/eebf4ce5ecb896e54912cfa21268e81ff5fb6593/
  (alljoyn)

  http://autobuild.buildroot.net/results/8dbf406898a59e36ac6a1e16f543b6260da775c8/
  (jsoncpp)

  http://autobuild.buildroot.net/results/206fbd5473c8c6840489990cb2552566c62ef3c8/
  (dawgic)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5quickcontrols: fix LTS (5.6) qml file install

Fixes #9666 [1]

  cp -dpfr .../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets .../target/usr/qml/QtQuick
  cp: cannot stat ‘.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets’: No such file or directory

[1] https://bugs.busybox.net/show_bug.cgi?id=9666

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "reproducible: fix DATE/TIME macros in toolchain-wrapper"

This reverts commit 76838f63412a30a358210e457dda4b79f7730624.

The commit referenced above explicitly states that the function was
copied as-is from the gcc source code at the time. And indeed that is
exactly how the function appeared in gcc in commit
e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934.

However, our toolchain wrapper is "GPLv2 only", while the file this function
was copied from is "GPLv3 or later".  As such we can't include that function
and still comply to both licenses.

Furthermore, the code is far from optimum.

Since this feature is not release-critical, revert it until we re-implement
it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sunxi-mali: reorder select/depends

>From [1]:
"Even though the ordering has absolutely no consequences in Kconfig, it
is not logical (when reading). It is more logical and far easier to
understand when depends come first, followed by the selects."

Also, the Config.in example in the manual suggests to use this coding
style [2].

[1] http://lists.busybox.net/pipermail/buildroot/2015-October/142955.html
[2] https://buildroot.org/downloads/manual/manual.html#writing-rules-config-in

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bctoolbox: disable rpath

By default, bctoolbox adds the rpath to the shared library. Prevent this
by setting `CMAKE_SKIP_RPATH` [1] to a true value.

[1] https://cmake.org/cmake/help/latest/variable/CMAKE_SKIP_RPATH.html

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bctoolbox: fix mbedtls/polarssl dependency

Currently we force selection on mbedtls for bctoolbox. If, for whatever
reason, mbedTLS is not found, bctoolbox searches for PolarSSL and, if
not present, fails with:

```
  Could NOT find PolarSSL (missing: POLARSSL_INCLUDE_DIRS
  HAVE_POLARSSL_SSL_H)
```

This happens because bctoolbox enables support for mbedTLS and PolarSSL
by default, whereas, if both are enabled, mbedTLS is preferred over
PolarSSL.

However, crypto support is not mandatory and support for both libraries
can be turned off. Therefore, optionally depend on mbedTLS or PolarSSL
and enable/disable the library support explicitly.

This fixes the issue of searching for PolarSSL altough the dependency is
not declared in the bctoolbox package.

Note, that this does not fix the issue why mbedtls is not found although
it is enabled. This issue is address in this thread [1].

Fixes:
http://autobuild.buildroot.net/results/cfe/cfeb2f542598e5d450b332fb51a6d79bae24158c/
.. and more.

[1] http://lists.busybox.net/pipermail/buildroot/2017-February/183055.html

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bctoolbox: add patch to fix static linking

Static linking with bctoolbox fails when using pkg-config as the
generated bctoolbox.pc file only consists of an '-L' string without any
search path or libraries flags:

```
libtool: link: need path for `-L' option
```

That's because of an typo in mbedtls_library_path. However,
mbedtls_library_path contains a string of the mbedtls libraries
concatenated by an ';' which cannot be parsed by pkg-config.

Therefore, use MBEDTLS_LIBRARY instead of MBEDTLS_LIBRARIES to get
the library path.

Furthermore, add the three mbedtls libraries mbedtls, mbedcrypto, and
mbedx509 to LIBS_PRIVATE so these libraries are added to the
Libs.private field of bctoolbox.pc.

Fixes:
http://autobuild.buildroot.net/results/37d5625df4be11ccdc063871e9f6e13d5f59fb52
http://autobuild.buildroot.net/results/1999c841fae41f860f00747a362327cb2857e687
.. and many more.

Upstream status: Pending
https://github.com/BelledonneCommunications/bctoolbox/pull/4

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "bctoolbox: fix typos and logic error"

This reverts commit 5c4d3560b94c9cb8f1594c9200a632b89ddf7aa0.

Although the patch fixes the build error it does not set the flags for
Libs.private properly. A follow-up patch will provide a better solution
for this issue.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages: improve license type lists

Make license type lists more uniform:

* put content license applies to in parenthesis; ex: "GPLv2+ (programs)"
* use commas to separate types listed without conjuction; ex: "GPLv2, LGPLv2"

No attempt was made to validate the claimed licenses.  This is just a tweak
to increase uniformity of the _LICENSE variables.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: replace semi-colons by commas in LIBURCU_LICENSE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: use system/buildroot provided freetype

Select (and use) builroot provided freetype in case qt5base gui is
selected (gui without freetype/font support makes not much sense
and gives compile errors).

Qt 5.6 needs some support to find the include headers, 5.8 is
clever enough inherently.

Fixes [1] (by avoiding the build-in freetype library which depends
on activated libpng support):

  Project ERROR: Library 'libpng' is not defined.
  make[3]: *** [sub-3rdparty-freetype-make_first] Error 3

[1] http://autobuild.buildroot.net/results/219162ba616289f799a5053c4dcc6b8574284283

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: move linuxfb configure option comment

Move the two comment lines to where they apply.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: build schedutils without enabling basic binaries

Pull an upstream fix to allow building schedutils (ionice, taskset,
chrt) when util-linux is configured with

  $ configure --disable-all-programs --enable-schedutils

Fixes:
  https://bugs.busybox.net/show_bug.cgi?id=9656

Reported-by: Aaron Holtzman <aholtzma@gmail.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

directfb: add gfx-state initialisation

The patch 0006-fix-client-gfx_state-initialisation.patch
add the initialisation for the variable gfx-state.

This patch was provided by the community and it is already
integrated in OpenEmbedded.

Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add fix for ARM specific static linking issues

Fixes:
  http://autobuild.buildroot.net/results/fb14e37aaf453874d1c33e5ed73b9c751ace5ae3
  http://autobuild.buildroot.net/results/774a8dd489760bc213ac7cf3e8040cee6a4e2437

And hopefully all other static ARM issues with uClibc-ng.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: define struct ucontext for or1k

Add missing define for struct ucontext for OpenRISC.

Fixes:
  http://autobuild.buildroot.net/results/d8715a2b3783d877edf91bb14a80d36eac749b36

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: disallow 5.8 version for ARMv4

Fixes:
http://autobuild.buildroot.net/results/197/197ab8a12bf1d780a986e5d447d1e0f5ee070405/

qt5.8 no longer supports ARMv4. From src/corelib/global/qprocessordetection.h:

  if Q_PROCESSOR_ARM >= 6
    define Q_PROCESSOR_ARM_V6
  endif
  if Q_PROCESSOR_ARM >= 5
    define Q_PROCESSOR_ARM_V5
  else
    error "ARM architecture too old"

[Peter: also hide comment as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

erlang: set ERL_TOP to avoid using user's version

Explicitly set the ERL_TOP environment variable to override values set
on a user's system. This prevents Erlang's configure scripts from
using source files outside of the ones that Buildroot downloaded.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wavpack: properly wrap help text

Wrap help text to fit 72 columns.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wavpack: fetch upstream patch to remove wchar dependency

The recent bump to version 5.1.0 added a dependency on wchar:

```
import_id3.c:37:34: error: unknown type name 'wchar_t'
```

This issue has been reported upstream [1] and a fix was commited by
upstream to remove the wchar dependency [2].

Fixes:
http://autobuild.buildroot.net/results/9a6/9a693f5b798571917f36cfb7661e2f2638aac550/
http://autobuild.buildroot.net/results/44c/44c8227043045baf4f043da44b8129e43dfff687/
http://autobuild.buildroot.net/results/a80/a80221dcc0860046ebdf0bbf454e056b1e20df83/
.. and more.

The build was successfully tested with the 'br-arm-basic-2017.02-rc1-2-g133c5ac'
toolchain.

[1] https://github.com/dbry/WavPack/issues/19
[2] https://github.com/dbry/WavPack/commit/876fc3f3907e871d0938ac6c8c5252f5f31abd1f

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glmark2: needs gcc >= 4.9 for C++14

Fixes:
    http://autobuild.buildroot.org/results/511/51162285d197deabb63727c19cdf5512b0e68f29/

[Peter: also add libstdcpp dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mosquito: needs sync_4

Fixes:
    http://autobuild.buildroot.org/results/2bc/2bc84ba2d1167018e2d48e5183ead22b6425dcf5/
    http://autobuild.buildroot.org/results/445/445f377ae70397b5f675f541977900e8986b79a4/
    http://autobuild.buildroot.org/results/57e/57e6984427f8c5d906a93884cc461b8f93cf5ce0/
    ...

[Peter: also add dependency to mosquitto comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mpv: fixup fix build on powerpc64 w/ altivec

The initial fix for this issue, re-including stdbool.h, is not
working.

Instead, fix using the method used for other packages with a similar
problem: add -std=gnu99, which prevents bool from being redefined and
removes the need for any source code change.

Fixes: 64904f0f6d691cfea5ae1c8f58e2d61aac0684c2
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

kmod: workaround for microblaze ld bug

Add a workaround for a microblaze specific ld bug to avoid
segfault.

Fixes:
  http://autobuild.buildroot.net/results/aef1b915ffd3e5678af8682727c22c5618edfd89

[Peter: force --gc-sections configure check to false instead of patching
  configure]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: workaround for microblaze ld bug

Add a workaround for a microblaze specific ld bug to avoid
segfault.

Fixes:
  http://autobuild.buildroot.net/results/638a65453879777a0d5bdb29231034cd261b41c0

[Peter: rename to LIBNSS_DROP_GC_SECTIONS for clarity]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: adopt freerdp

Julian only ever sent one patch to freerdp, the one adding it, in 2012.

I'm somewhat interested in this package, so I'll adopt it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1: drop unused configure time unaligned access handling logic

gstreamer has moved to build time unaligned access support detection using
ifdefs in gstconfig.h since 1.9.2:

commit 6ef601367e0f5adb7a8b02cec94dec04fccf701a
Author: Nirbheek Chauhan <nirbheek@centricular.com>
Date:   Tue Jun 21 18:59:49 2016 +0530

    gstconfig.h: Detect unaligned access support at compile-time

    This makes gstconfig.h completely arch-independent. Should cover all
    compilers that gstreamer is known to build on, and all architectures
    that I could find information on. People are encouraged to file bugs if
    their platform/arch is missing.

So ac_cv_unaligned_access is no longer used and our logic can be removed.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1: fix unaligned detection for or1k

Fixes:
http://autobuild.buildroot.net/results/717/717d78ce0935749f477bdf3133b6f20057a28c01/

Add patch to fix unaligned detection for or1k.  Patch submitted upstream:

https://bugzilla.gnome.org/show_bug.cgi?id=778866

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer: fix unaligned detection for or1k

Similar to how we do it for the other niche/new architectures.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba4: requires NPTL

With OpenRISC there is a uClibc-ng based toolchain for an
architecture with MMU support, but with only Linuxthreads
and no NPTL. Samba4 uses pthread_mutexattr_setrobust which
is not implemented in uClibc-ng Linuxthreads.

Fixes:
  http://autobuild.buildroot.net/results/ec8f078046c92ae23dc973c88ac0fef136ad1535

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mpd: use proper BR2_PACKAGE_MPD_VERSION_0_19 symbol

Commit 9244ad854 [1] adds a hidden choice between version 0.19 and 0.20. The
Makefile now uses a wrong symbol introduced by this commit. Fix by:
s/BR2_MPD_VERSION_0_19/BR2_PACKAGE_MPD_VERSION_0_19.

[1] https://git.buildroot.net/buildroot/commit/?id=9244ad854d30e8c942460646ef6f6194ee44942d

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus: security bump to version 1.10.16

>From http://www.openwall.com/lists/oss-security/2017/02/16/4

The latest dbus release 1.10.16 fixes two symlink attacks in
non-production-suitable configurations. I am treating these as bugs
rather than practical vulnerabilities, and very much hope neither of
these is going to affect any real users, but I'm reporting them to
oss-security in case there's an attack vector that I've missed.

No CVEs assigned so far.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trousers: disable on ARC

This package has been failing to build on ARC due to a toolchain bug
since December 2015, causing a total of 168 build failures. Therefore,
let's disable this package for now, until the toolchain issue gets
resolved.

Fixes^Wavoids:

  http://autobuild.buildroot.net/results/e65d1d7c5a4dd4616167cfe2aa938be6af139602/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libraw: fix build with old glibc versions

Prior to glibc 2.18, definitions like SIZE_MAX or INT_FAST32_MAX from
<stdint.h> were only made available for C code, or in C++ if
__STDC_LIMIT_MACROS was defined.

The code from jasper uses such definitions, without defining
__STDC_LIMIT_MACROS. Unfortunately, defining __STDC_LIMIT_MACROS in
the jasper headers doesn't work, since <stdint.h> has already been
included before, at a point where __STDC_LIMIT_MACROS was not defined.

So to solve this problem, we simply pass -D__STDC_LIMIT_MACROS in
CXXFLAGS when building libraw with jasper support.

Fixes:

  http://autobuild.buildroot.net/results/908aef6c82d56060933713df217b6b2ba21a01b0/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tcping: fix upstream location

The upstream site is no longer available from http://www.linuxco.de,
but only from http://linuxco.de.

Fixes:

  http://autobuild.buildroot.net/results/03caf8403c31e2424c338de4df636dd900408b14/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>