daily update

*** empty log message ***

Select 32-bit pei for 64-bit pei configurations.

Back out the change introducing the "record pic" feature.

gdb/ChangeLog:

Back out the following change:
| 2010-06-29  Hui Zhu  <teawater@gmail.com>
| * record.c (set_record_pic_cmdlist,
| show_record_pic_cmdlist): New variables.
| (set_record_pic_command,
| show_record_pic_command): New functions.
| (record_pic_function, record_pic_line, record_pic_enum,
| set_record_pic_type, record_pic_hide_nofunction,
| record_pic_hide_nosource, record_pic_hide_same): New variables.
| (record_pic_fputs): New function.
| (function_list, node_list, edge_list): New struct.
| (function_list, node_list, edge_list): New variables.
| (record_pic_cleanups, record_pic_node,
| record_pic_edge, cmd_record_pic): New functions.
| (_initialize_record): Add new commands for record pic.

* gas/cfi/reloc-pe-i386.d, gas/cfi/reloc-pe-i386.s: New test.

* dw2gencfi.c (TC_DWARF2_EMIT_OFFSET): Provide default.
(output_fde): Use it.  Make sure to fully init exp before using it.
testsuite/
* gas/cfi/cfi-common-1.d: Use objdump instead of readelf to dump.
* gas/cfi/cfi-common-2.d, gas/cfi/cfi-common-3.d,
gas/cfi/cfi-common-4.d, gas/cfi/cfi-common-6.d,
gas/cfi/cfi-common-7.d, gas/cfi/cfi-x86_64.d: Likewise.
* gas/cfi/cfi-x86_64.s: Remove .type directives.
* gas/cfi/cfi.exp: Run for pecoff objects too.
* gas/cfi/reloc-pe-i386.d, gas/cfi/reloc-pe-i386.s: New test.

* dwarf.c (init_dwarf_regnames_i386, init_dwarf_regnames_x86_64): New.
(init_dwarf_regnames): Use them.
* dwarf.h: Declare them.
* objdump.c (dump_dwarf): Use bfd_get_arch + bfd_get_mach to set up
the regnames, rather than using elf_machine_code.

    * objdump.c (dump_dwarf): Use bfd_arch_bits_per_address.

Fix ChangeLog entries cli-logging.c -> cli/cli-logging.c .

* config.in, configure: Regenerated.
* configure.ac: Check for waitpid.
* ser-pipe.c (pipe_close): Wait for the program to exit.

gdb/
* cli-logging.c: Include gdb_assert.h.
(set_logging_overwrite): New function.
(logging_redirect): New comment.
(logging_no_redirect_file, set_logging_redirect)
(pop_output_files) <logging_no_redirect_file>: New.
(handle_redirections) <!logging_redirect>: New variable
no_redirect_file.  Remove file autoclose for tee_file_new.  No longer
discard cleanup for the close of former OUTPUT.  Set
LOGGING_NO_REDIRECT_FILE.
(handle_redirections) <logging_redirect>: gdb_assert
LOGGING_NO_REDIRECT_FILE.
(show_logging_command) <logging_redirect handling>: Adjust messages
for SAVED_FILENAME not NULL.
(_initialize_cli_logging): Install set_logging_overwrite and
set_logging_redirect.

Add test for -file-list-exec-source-files

gdb/testsuite/ChangeLog:

        * gdb.dwarf/dw2-filename.S, gdb.dwarf/dw2-filename.exp: New files.

gdb/
* iq2000-tdep.c (iq2000_scan_prologue): Initialize SAL.END.

gdb/
* Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT): Convert it to the no- form.
(monitor.o): Replace $(INTERNAL_WARN_CFLAGS) by $(INTERNAL_CFLAGS) and
add $(GDB_WARN_CFLAGS_NO_FORMAT).
(printcmd.o): Replace $(INTERNAL_CFLAGS_BASE) by $(INTERNAL_CFLAGS).

2010-09-02  Yao Qi  <yao@codesourcery.com>

        * linux-nat.c (status_to_str): Use WTERMSIG to extract the signal
        number from a WIFSIGNALED status.

*** empty log message ***

daily update

* symtab.h (lookup_type_symbol): Declare.
* symtab.c (lookup_symbol_in_language_full): Rename from
lookup_symbol_in_language.  Add 'for_type' argument.
(lookup_symbol_in_language): New function.
(lookup_type_symbol): Likewise.
(lookup_symbol_aux): Add 'for_type' argument.
(match_symbol_aux): New function.
(lookup_symbol_aux_symtabs): Use expand_one_symtab_matching.
(match_transparent_type): New function.
(basic_lookup_transparent_type): Use expand_one_symtab_matching.
* symfile.h (struct quick_symbol_functions)
<pre_expand_symtabs_matching>: Remove.
<expand_one_symtab_matching>: New field.
* psymtab.c (expand_one_symtab_matching_psymtabs): New function.
(pre_expand_symtabs_matching_psymtabs): Remove.
(psym_functions): Update.
* gdbtypes.c (lookup_typename): Use lookup_type_symbol.
* dwarf2read.c (dw2_lookup_symbol): Update comment.
(dw2_pre_expand_symtabs_matching): Remove.
(dw2_expand_one_symtab_matching): New function.
(dwarf2_gdb_index_functions): Update.

[NEWS] powerpc-lynxos gdbserver support

This adds an entry in the NEWS file announcing the GDBserver support
on powerpc-lynxos.

gdb/ChangeLog:

        * NEWS: Add entry announcing GDBserver support on powerpc-lynxos.

   * mi/mi-main.c (mi_cmd_list_target_features): Add `reverse'
       as a feature reported by -list-target-features.

       * gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
       feature `reverse' output by -list-target-features.

gdbserver support for powerpc-lynxos (4.x)

This patch adds support for powerpc-lynxos.

gdbserver/ChangeLog:

        * gdbserver/lynx-low.c, gdbserver/lynx-low.h,
        gdbserver/lynx-ppc-low.c: New files.
        * Makefile.in (lynx_low_h): New variable.
        (lynx-low.o, lynx-ppc-low.o): New rules.
        * configure.ac: On LynxOS, link with -lnetinet.
        * configure.srv: Add handling of powerpc-*-lynxos* targets.
        * configure: regenerate.

Import vsnprintf from libiberty if not available.

vasprintf and vsnprintf are not available on LynxOS, at least not on
version 4.0.0.  This patch updates the configury to import them from
libiberty if not available out of the box.

gdbserver/
        * Makefile.in (vasprintf.o, vsnprintf.o): New rules.
        * configure.ac: Add check for vasprintf and vsnprintf.
        * configure, config.in: Regenerate.
        * server.h (vasprintf, vsnprintf): Add conditional declarations.

Generate regformats/rs6000/powerpc-32.dat

I will need this description for the ppc-lynxos debugger where, AFAICT,
we only have access to the core GP and FP registers.  So this adds
powerpc-32 to the list of targets for which a .dat file needs  to be
generated.

2010-04-30  Joel Brobecker  <brobecker@adacore.com>

        * features/Makefile (WHICH): Add rs6000/powerpc-32.
        (powerpc-32.o, powerpc-32.c): New rules.
        (clean): Also remove powerpc-32.c.
        * regformats/rs6000/powerpc-32.dat: Generate.

[gdbserver] Move malloc.h include to server.h.

This patch moves all includes of malloc.h, which were introduced
purely to get access to alloca's declaration, to server.h, next
to the include of alloca.h.

There is one exception: gdbreplay.c, which does not include server.h.
In this case, the include of alloca.h was simply moved up a bit, next
to the include of malloc.h.

gdb/gdbserver/ChangeLog:

        * gdbreplay.c: Move include of alloca.h up, next to include of
        malloc.h.
        * server.h: Add include of malloc.h.
        * mem-break.c: Remove include of malloc.h.
        * server.c, tracepoint.c, utils.c, win32-low.c: Likewise.

Put ChangeLog entries in the right ChangeLog file.

* netbsd-core.c (netbsd_core_core_file_pid): Renamed to ...
(netbsd_core_file_pid): ... this.

Fix typo

    * ld-scripts/section-match.exp: New file.  Runs ths
        section-match-1 test.
        * ld-scripts/section-match-1.d: New file.
        * ld-scripts/section-match-1.s: New file.
        * ld-scripts/section-match-1.t: New file.

2010-09-01  Tristan Gingold  <gingold@adacore.com>

* coffcode.h (coff_slurp_line_table): Add a cast.
(coff_slurp_reloc_table): Ditto.

Compile memmem.o without -Werror.

This reproduces the same approach as in GDB to allow us to build
specific files without -Werror.

gdb/gdbserver/ChangeLog:

        * Makefile.in (INTERNAL_CFLAGS_BASE): New variable. Extracted
        from INTERNAL_CFLAGS.
        (INTERNAL_WARN_CFLAGS): New variable.
        (INTERNAL_CFLAGS): Adjust, using INTERNAL_WARN_CFLAGS.

use xsnprintf instead of snprintf.

snprintf is not available on LynxOS, so I changed the calls to snprintf
to calls to xsnprintf, which should be strictly equivalent.

gdb/gdbserver/ChangeLog:

        * utils.c (xsnprintf): Make non-static.
        * server.h: Add xsnprintf declaration.
        * linux-low.c, nto-low.c, target.c, thread-db.c, tracepoint.c:
        replace calls to snprintf by calls to xsnprintf throughout.

include alloca.h if available.

On LynxOS, alloca is defined in allocal.h.  This fixes one warning that
occurs when building GDBserver for LynxOS.

gdb/gdbserver/ChangeLog:

        * configure.ac: Add configure check for alloca.
        * configure, config.in: Regenerate.
        * server.h: Include alloca.h if it exists.
        * gdbreplay.c: Include alloca.h if it exists.

*** empty log message ***

daily update

Fix "pushw imm16" for x86-64 disassembler.

gas/testsuite/

2010-08-31  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/11960
* gas/i386/opcode-intel.d: Updated.
* gas/i386/x86-64-opcode.d: Likewise.

* gas/i386/x86-64-opcode.s: Add a "pushw imm16" test.

opcodes/

2010-08-31  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/11960
* i386-dis.c (sIv): New.
(dis386): Replace Iq with sIv on "pushT".
(reg_table): Replace T with {T|} on callT, JcallT, jmpT and JjmpT.
(x86_64_table): Replace {T|}/{P|} with P.
(putop): Add 'w' to 'T'/'P' if needed for Intel syntax.
(OP_sI): Update v_mode.  Remove w_mode.

Create and use a specialized bcache type for psymbols

2010-08-31  Sami Wagiaalla  <swagiaal@redhat.com>

* symfile.c (reread_symbols): Use psymbol_bcache_free, and
psymbol_bcache_init.
* psymtab.h (psymbol_bcache_init): New function prototype.
(psymbol_bcache_free): New function prototype.
(psymbol_bcache_get_bcache): New function prototype.
* psymtab.c (psymbol_bcache_init): New function.
(psymbol_bcache_free): New function.
(psymbol_bcache_full): New function.
(psymbol_bcache_get_bcache): New function.
(add_psymbol_to_bcache): use psymbol_bcache_full.
* objfiles.h (psymbol_cache): Change type of psymbol_cache to
psymbol_bcache.
* symmisc.c (print_symbol_bcache_statistics): Updated.
(print_objfile_statistics): Updated.
* objfiles.c (allocate_objfile): Use psymbol_bcache_init to initialize
psymbol_cache.
(free_objfile): Use psymbol_bcache_free.

PR c++/11961:
* dwarf2read.c (new_symbol_full) <DW_TAG_template_type_param>:
Don't set TYPE_NAME on the type.

2010-08-31  Michael Snyder  <msnyder@msnyder-server.eng.vmware.com>

* infrun.c (set_exec_direction_func): Error out if target does not
support reverse execution.

* gdb.dwarf2/dw4-sig-types.exp: Use .x for executable name.

gdb/
Make linux_get_siginfo_type `type *' unique.
* linux-tdep.c (linux_gdbarch_data_handle, struct linux_gdbarch_data)
(init_linux_gdbarch_data, get_linux_gdbarch_data): New.
(linux_get_siginfo_type): New variable linux_gdbarch_data.  Initialize
it.  Use linux_gdbarch_data->siginfo_type as a persistent storage.
(_initialize_linux_tdep): New.

gdb/
Code cleanup.
* defs.h (find_memory_region_ftype): New typedef.
(exec_set_find_memory_regions): Use it.
* exec.c (exec_set_find_memory_regions): Use find_memory_region_ftype.
* fbsd-nat.c (fbsd_find_memory_regions): Likewise.
* gcore.c (objfile_find_memory_regions): Likewise.
* gnu-nat.c (gnu_find_memory_regions): Likewise.
* linux-nat.c (linux_nat_find_memory_regions): Likewise.
* procfs.c (iterate_over_mappings_cb_ftype): Remove.
(iterate_over_mappings): Rename iterate_over_mappings_cb_ftype to
find_memory_region_ftype.
(insert_dbx_link_bpt_in_region): Likewise.
(iterate_over_mappings): Likewise.  Drop the comment part about the
function prototype.
(find_memory_regions_callback): Use find_memory_region_ftype.
(proc_find_memory_regions): Likewise.
(info_mappings_callback): Rename iterate_over_mappings_cb_ftype to
find_memory_region_ftype.
* target.c (dummy_find_memory_regions): Use find_memory_region_ftype.
* target.h (struct target_ops) <to_find_memory_regions>: Likewise.

Enable custom bcache hash function.

2010-08-25  Sami Wagiaalla  <swagiaal@redhat.com>

* psymtab.c (add_psymbol_to_bcache): Remove 'static' from
'static partial_symbol psymbol'.
(psymbol_hash): New function.
(psymbol_compare): New function.
* bcache.c (hash_continue): New.
(hash): Use hash_continue.
* bcache.c: Add hash_function and compare_function
pointers to bcache struct.
(bcache_full): Use bcache->hash_function, and
bcache->compare_function.
(bcache_compare): New function.
(bcache_xmalloc): Take hash_function and
compare_function arguments and initialize the
bcach's pointers.
Updated comment.
* objfiles.c (allocate_objfile): Updated.
* symfile.c (reread_symbols): Updated.
* python/py-type.c (typy_richcompare): Updated.

    * ldlex.l (WILDCHAR): Add the caret and exclamation point
        characters, so that they can be used inside regexps.

Remove an extra "@item".

2010-08-31  H.J. Lu  <hongjiu.lu@intel.com>

* gdb.texinfo (i386 Features): Remove an extra "@item".

2010-08-31  Kai Tietz  <kai.tietz@onevision.com>

        * config/obj-coff-seh.c (obj_coff_seh_save): Correct comparison.
        (obj_coff_seh_stackalloc): Likewise.

    * ld.texinfo (MEMORY): Clarify the behaviour of the ! character in
        a region's attributes.

* config/obj-elf.c (obj_elf_init_stab_section): Fix assertion.

* scripttempl/mmo.sc: Move assignment to "Main" inside .text
output section statement.

*** empty log message ***

daily update

* config/obj-coff-seh.c: Rewrite the entire file.
(symtab, symptr, reltab, relcount, relsize): Remove.
(seh_ctx_root, seh_ctx): Remove.
(xdata_seg, xdata_subseg, pdata_seg): New.
(switch_xdata, switch_pdata): New.
(verify_context, verify_context_and_target, skip_whitespace_and_comma):
New parsing functions.  Rewrite all parsing functions to use them.
(obj_coff_seh_32): Fix != arm thinko.
(obj_coff_seh_handler): For x64, don't accept handler pointer here,
only flags.
(obj_coff_seh_handlerdata): New.
(do_seh_endproc): Split out of ...
(obj_coff_seh_endproc): ... here.
(obj_coff_seh_proc): Use it, if needed.
(seh_x64_make_prologue_element): Use XRESIZEVEC, symbol_temp_new_now.
(seh_x64_read_reg): Remove mm_regs alternative.  Tidy integer reg
alternatives.  Don't slurp commas.
(seh_read_offset): Remove.
(obj_coff_seh_pushframe): Split out from obj_coff_seh_push.
(obj_coff_seh_scope): Remove.
(obj_coff_seh_save): Decide UWOP_SAVE_* vs _FAR immediately.
(obj_coff_seh_stackalloc): Decide _SMALL vs _LARGE immediately.
(out_one, out_two, out_four): New.
(seh_x64_write_prologue_data, seh_x64_size_prologue_data,
seh_x64_write_function_xdata, write_function_xdata): Rewrite
from seh_x64_write_xdata, seh_needed_unwind_info, seh_store_elm_data,
seh_getelm_data_size, seh_getsize_of_unwind_entry,
seh_make_unwind_entry, seh_getsize_unwind_data, and
seh_create_unwind_data.
(seh_arm_write_function_pdata): Rewrite from seh_arm_create_pdata.
(write_function_pdata): Rewrite from make_function_entry_pdata.
(seh_write_text_eh_data, make_function_entry_pdata,
seh_arm_create_pdata, seh_arm_write_pdata, seh_reloc, save_relocs,
seh_symbol_init, seh_symbol, quick_section, seh_emit_rva,
seh_emit_long, seh_make_globl, seh_make_section2, seh_make_section,
seh_make_xlbl_name, make_seh_text_label, seh_fill_pcsyms,
seh_needed_unwind_info, seh_store_elm_data, seh_getelm_data_size,
seh_getsize_of_unwind_entry, seh_make_unwind_entry,
seh_getsize_unwind_data, seh_create_unwind_data,
seh_make_function_entry_xdata, seh_x64_makescope_elem): Remove.
* config/obj-coff-seh.h (SEH_CMDS): Remove seh_savemm, seh_scope.
Add seh_handlerdata.  Adjust function/what arguments for
seh_savereg, seh_pushframe, seh_stackalloc.
(struct seh_prologue_element): Adjust members to closer match
the elements of the UNWIND_CODE structure.
(struct seh_scope_elem): Remove.
(struct seh_context): Replace char* members with symbolS or
expressionS as appropriate.  Sort members by ARM/x64 applicability.
Remove obsolete stuff wrt direct symbol and reloc manipulation.

gdb
2010-08-30  Andre Poenitz  <andre.poenitz@nokia.com>
    Tom Tromey  <tromey@redhat.com>

PR python/11792:
* python/py-value.c (valpy_get_dynamic_type): New function.
(value_object_getset): Add "dynamic_type".
(valpy_get_type): Fail on error.
gdb/doc
PR python/11792:
* gdb.texinfo (Values From Inferior): Document dynamic_type.
gdb/testsuite
PR python/11792:
* gdb.python/py-value.exp (test_subscript_regression): Add
dynamic_type test.

* gdb.cp/cpexprs.exp (test_breakpoint): Continue to test_function
instead of running to main.  Do not test the main function.
* gdb/testsuite/gdb.cp/cpexprs.cc (main): Rename to test_function.
Add new main.

2010-08-30  Yao Qi  <yao@codesourcery.com>

* arm-linux-tdep.c (arm_linux_sigreturn_return_addr): New.
(arm_linux_syscall_next_pc): New.
(arm_linux_copy_svc): Use arm_linux_sigreturn_return_addr instead.
(arm_linux_init_abi): Initialize syscall_next_pc.
* arm-tdep.c (thumb_get_next_pc_raw):  Get next pc of SWI in Thumb mode.
(arm_get_next_pc_raw): Get next pc of SWI in ARM mode.
* arm-tdep.h (struct gdbarch_tdep): Add a function pointer syscall_next_pc.
Declare arm_frame_is_thumb.

remove file committed by mistake

gdb/
Code cleanup.
* breakpoint.c (bpstat_alloc): Remove unused prototype.
(bpstat_alloc): Change parameters cbs to bs_link_pointer.  Adjust the
code.
(bpstat_stop_status): Change root_bs into bs_head and bs_link.  Adjust
calls of bpstat_alloc.  Remove explicit bs chain termination.

* cisco-core.c (cisco_core_file_pid): Define.

PR binutils/11953
* elf.c (copy_elf_program_header): Calculate map->header_size
from lowest_section, not first_section.  Validate program
header p_paddr against section lma.  Find lowest_section in
second loop over headers.

*** empty log message ***

daily update

daily update

*** empty log message ***

* linux-low.c (__SIGRTMIN): Define if not already defined.
(linux_create_inferior): Check for __ANDROID__ rather than
__SIGRTMIN.
(enqueue_one_deferred_signal): Don't requeue non-RT signals that
are already deferred.
(linux_wait_1): Check for __ANDROID__ rather than __SIGRTMIN.
(linux_resume_one_thread): Don't queue a SIGSTOP if the lwp is
stopped and already has a pending signal to report.
(proceed_one_lwp): : Don't queue a SIGSTOP if the lwp already has
a pending signal to report or is moving out of a jump pad.
(linux_init_signals): Check for __ANDROID__ rather than
__SIGRTMIN.

* linux-low.c (linux_stabilize_threads): Wrap debug output in a
debug_threads check.  Avoid a linear search when not doing debug
output.

gdb/
Code cleanup.
* linux-nat.c (pull_pid_from_list): Rename status to statusp.
(my_waitpid): Likewise.

2010-08-27  Doug Kwan  <dougkwan@google.com>

* gold/resolve.cc (Symbol_table::should_override): Let a weak
reference override an existing dynamic weak reference.
* testsuite/Makefile.am: Add new test dyn_weak_ref.
* testsuite/Makefile.in: Regenerate.
* testsuite/dyn_weak_ref.sh: New file.
* testsuite/dyn_weak_ref_1.c: Ditto.
* testsuite/dyn_weak_ref_2.c: Ditto.

* elflink.c (_bfd_elf_dynamic_symbol_p): Rename param.  Make
common syms local.
(_bfd_elf_symbol_refs_local_p): Expand comment.
(elf_link_output_extsym): Fix style nit.

daily update

*** empty log message ***

* dwarf2read.c (dw2_require_line_header): Read from .debug_types
as appropriate.

* dwarf2read.c (dwarf2_attach_fields_to_type): Don't set
TYPE_FIELD_IGNORE_BITS.

* incremental.h (class Incremental_input_entry): Add virtual
destructor.

* testsuite/start_lib_test_3.c: Mark t3 as used.

* dwarf2read.c (dwarf2_per_objfile_free): Reorganize buffers to match
the order they're defined in.  munmap .debug_types buffer.

* event-loop.c (event_handle_func): Adjust to use gdb_fildes_t.
(struct gdb_event) <fd>: Change type to gdb_fildes_t.
(struct file_handler) <fd>: Change type to gdb_fildes_t.
(process_event): Change local fd's type to gdb_fildes_t.
(create_file_handler): Adjust prototype.
(delete_file_handler): Adjust prototype.
(handle_file_event): Adjust prototype.  Use pfildes.
(create_file_event): Adjsut prototype.
* remote-utils.c (remote_desc, listen_desc): Change type to
gdb_fildes_t.
* server.h: New gdb_fildes_t typedef.
[USE_WIN32API]: Include winsock2.h.
(delete_file_handler, add_file_handler): Adjust prototypes.
(pfildes): Declare.
* utils.c (pfildes): New.

opcodes/
* ppc-opc.c (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate
on E500 and E500MC.

Fix whitespace, tabs/spaces.

* configure.ac (build_warnings): Add -Wno-char-subscripts.
* configure: Regenerate.

    * options.cc (version_script): Fix small typo in previous
        whitespace tidyup.

* linux-low.c (linux_unprepare_to_access_memory): Rename to ...
(linux_done_accessing_memory): ... this.
(linux_target_ops): Adjust.
* linux-x86-low.c (x86_insert_point, x86_remove_point): Adjust.
* nto-low.c (nto_target_ops): Adjust comment.
* server.c (gdb_read_memory, gdb_write_memory): Adjust.
* spu-low.c (spu_target_ops): Adjust comment.
* target.h (target_ops): Rename unprepare_to_access_memory field
to done_accessing_memory.
(unprepare_to_access_memory): Rename to ...
(done_accessing_memory): ... this.

daily update

*** empty log message ***

* dwarf2read.c (dw2_require_full_path): Rename parameter cu to per_cu.
(dw2_forget_cached_source_info): Rename local cu to per_cu.
(dw2_lookup_symtab, dw2_do_expand_symtabs_matching): Ditto.
(dw2_print_stats, dw2_expand_all_symtabs): Ditto.
(dw2_expand_symtabs_with_filename, dw2_find_symbol_file): Ditto.
(dw2_find_symbol_file, dw2_expand_symtabs_matching): Ditto.
(dw2_map_symbol_filenames, dwarf2_initialize_objfile): Ditto.
(dwarf2_free_objfile, write_one_signatured_type): Ditto.
(write_psymtabs_to_index): Ditto.

* linux-low.c (linux_prepare_to_access_memory): New.
(linux_unprepare_to_access_memory): New.
(linux_target_ops): Install them.
* server.c (read_memory): Rename to ...
(gdb_read_memory): ... this.  Use
prepare_to_access_memory/prepare_to_access_memory.
(write_memory): Rename to ...
(gdb_write_memory): ... this.  Use
prepare_to_access_memory/prepare_to_access_memory.
(handle_search_memory_1): Adjust.
(process_serial_event): Adjust.
* target.h (struct target_ops): New fields
prepare_to_access_memory and unprepare_to_access_memory.
(prepare_to_access_memory, unprepare_to_access_memory): New.
* linux-x86-low.c (x86_insert_point, x86_remove_point): Use
prepare_to_access_memory/prepare_to_access_memory.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_target_ops): Adjust.
* win32-low.c (win32_target_ops): Adjust.

* NEWS: Mention libthread_db debugging with core files.

* Makefile.in (WARN_CFLAGS): Get it from configure.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line.  Enabled by default.  Disable with
--disable-werror.  Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
* configure: Regenerate.

* Makefile.in (WARN_CFLAGS): Get it from configure.
(WERROR_CFLAGS): New.
(INTERNAL_CFLAGS): Add WERROR_CFLAGS.
* configure.ac: Introduce --enable-werror, which adds -Werror to
the compiler command line.  Enabled by default.  Disable with
--disable-werror.  Add -Wdeclaration-after-statement
Wpointer-arith and -Wformat-nonliteral to warning flags.
        * configure: Regenerate.

* dwarf2read.c (dwarf2_build_include_psymtabs): Remove unnecessary
forward decl.  Pass pst->dirname to dwarf_decode_lines.
(psymtab_include_file_name): New function.
(dwarf_decode_lines): Call it.  Update comments.

* mem-break.c [HAVE_MALLOC_H]: Include malloc.h.

* gdbreplay.c (remote_error): New.
(gdbchar): New.
(expect): Use gdbchar.  Check for error reading from GDB.
Clarify sync error output.
(play): Check for errors writing to GDB.
* linux-low.c (sigchld_handler): Really ignore `write' errors.
* remote-utils.c (getpkt): Check for errors writing to the remote
descriptor.

* gdb.mi/mi-nsmoribund.exp: Revert back to send_gdb/gdb_expect in
one test.

* elf32-arm.c (elf32_arm_final_link): Process stub sections
exactly once.

daily update

*** empty log message ***

Don't set unique_global for non-ELF hash link table.

2010-08-25  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11939
* elflink.c (elf_link_add_object_symbols): Don't set
unique_global for non-ELF hash link table.

* dwarf2read.c (inherit_abstract_dies): Handle origin die's
compilation unit being different from target die's.

Check audit entry only on ELF input.

2010-08-25  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11946
* emultempl/elf32.em (_before_allocation): Check audit entry
only on ELF input.

* linux-low.c (linux_wait_1): Move non-debugging code out of
`debug_threads' control.

* linux-low.c (linux_wait_1): Don't set last_status here.
* server.c (push_event, queue_stop_reply_callback): Assert we're
not pushing a TARGET_WAITKIND_IGNORE event.
(start_inferior, start_inferior, attach_inferior, handle_v_cont)
(myresume, handle_target_event): Set the thread's last_resume_kind
and last_status from the target returned status.

Move gas/ld NEWS from binutils to gas/ld.