qt5multimedia: add license info for examples fftreal library

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5x11extras: fix license information

This commit fixes several problems with the license information of
qt5x11extras:

 - With the latest version update the legacy version files
   LICENSE.GPLv2 LICENSE.GPLv3 and LICENSE.LGPLv3 were removed, use
   the new ones LICENSE.GPL2 LICENSE.GPL3 and LICENSE.LGPL3 instead.

   Fixes:

   http://autobuild.buildroot.net/results/238bb74f23d7a11516eac088da3188d463abac5a

 - Hashes for some licenses files for the 5.6.3 version were missing.

As part of this, we switch to using per-version hash files entirely.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: linuxptp: enhance systemd service

linuxptp now pulls in the time-sync.target, which other services can
use to make sure they have a valid time before starting.

phc2sys (linuxptp-system-clock.service) starts after ptp4l
(linuxptp.service) so we have a valid time before writing it to the
hardware clock.

Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: do runtime tests only on explicit trigger

When the runtime tests were first introduced, they still ran pretty
quickly. Nowadays, however, there are a lot of runtime tests, and some
of them take a really long time. So running them on every push is
really too much.

Just like we do for the defconfigs, run them on explicit trigger only.

The explicit trigger is now done every week, but it can be increased
to e.g. twice or three times per week.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: .gitlab-ci.yml: fail when listing tests fail

To update the .gitlab-ci.yml file, we run run-tests -l to list all the
tests and post-process the output in a format suitable for
.gitlab-ci.yml. However, in a pipeline, it is the last command that
gives the return value. In addition, we have to redirect stderr of
run-tests -l because nose2 prints the tests on stderr, not stdout. Thus,
when run-tests -l fails, the update of .gitlab-ci.yml silently succeeds
but no tests are included in the .gitlab-ci.yml.

To fix this, set the pipefail option. This is bash-specific, but our
Makefile ascertains that we are running with bash as the shell (if bash
is available, but if it is not, dependencies.sh will error out). The
error message is still invisible, but at least make will fail.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: bump to version 7.9p1

Drop patch #1. uClibc no longer includes pthreads.h indirectly.

Drop patch #2. The sys/param.h header is included indirectly through the
local includes.h header since version 6.8p1.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/binutils: remove binutils 2.27 patches

binutils 2.27 support was removed in commit
453d29f1f45736d0156071930a09015def68994a.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/diffconfig: remove BR2_* prefix restriction

The utils/diffconfig script works only on variables with the BR2_
prefix. This is OK for Buildroot [def]configs since this is the prefix
for all user-facing variables, but it prevents using the same script
to compare configs from kconfig-based packages.

Remove the BR2_ restriction, allowing usage such as:

  ./utils/diffconfig \
board/qemu/xtensa-lx60/linux.config \
board/qemu/xtensa-lx60/linux-nommu.config

Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python3: use pure python UUID backend

Python3 at runtime identifies the uuid backend to use to implement safe
time-based UUID generation functions. When the python _uuid extension
module, /usr/lib/python3.7/lib-dynload/_uuid.cpython-37m-<arch>.so
is not found, the fall back is to use a pure python implementation.

 - If uuid.h from util-linux is available at build time, the _uuid
   module is built and used. A Buildroot patch allows us to disable this
   build-time check and never build the _uuid module.

With the bump to python 3.7, an optional dependency on util-linux was
added to build the _uuid module. However, this may lead to circular
dependencies. To break this circular dependency, we can disable the
build of the _uuid module and always use the pure python implementation.

Ref:
http://lists.busybox.net/pipermail/buildroot/2018-October/233113.html
http://lists.busybox.net/pipermail/buildroot/2018-September/231060.html
http://lists.busybox.net/pipermail/buildroot/2018-October/233079.html

CC: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/legal-info: Add package dependencies with licenses to the manifest

This adds one column to the legal-info manifest table. It contains the
dependencies of the given package and their licenses. This information
is useful when assessing license compatibility of the packages and
their libraries.

An example of the content of the new column for the MPD package is
shown below:

    "alsa-lib [LGPL-2.1+ (library), GPL-2.0+ (aserver)] boost
    [BSL-1.0] libid3tag [GPL-2.0+] libmad [GPL-2.0+] libogg
    [BSD-3-Clause] libvorbis [BSD-3-Clause] libzlib [Zlib]
    skeleton-init-common [unknown] skeleton-init-sysv [unknown] sqlite
    [Public domain] toolchain-external-linaro-arm [unknown]"

[Credits to Yann E. MORIN <yann.morin.1998@free.fr> for suggesting a
few simplifications.]

Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core/legal-info: Change order of legal-manifest parameters

The last parameter {HOST|TARGET} is now first. With this change,
adding new columns to the legal manifest file (as in the next commit)
will be slightly easier to review.

Signed-off-by: Michal Sojka <sojka@merica.cz>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: enable keyring

Enable keyring if libsecret is available

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bluez5_utils: ensure build order with the headers-only variant

Since bluez5_utils and bluez5_utils-headers would install the same set
of files (headers), we want to ensure the former is run after the
latter.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Grzegorz Blach <grzegorz@blach.pl>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux: add custom linux boot logo option

This patch adds a simple way to change the linux bootup logo.
The patch was kept purposely simple to support only the use cause
where a user needs a color linux boot up logo.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Peter: clarify/reword option/help text, automatically enable framebuffer
support, fix convert path]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imagemagick: add host package

This patch adds the host package for imagemagick.
It comes with a minimal selection of configure options to
compile fast cause it is used only to convert
the image files for the custom linux logo.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Peter: explicitly disable other configure options like it is done for the
target variant, add host-pkgconf]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mongoose: bump to version 6.13

For some reason, the hash of the Github-provided tarball for mongoose
6.7 has changed. The actual contents are the same between the old and
new tarballs, only the order of the files is changed.

However, changing the hash would break older Buildroot releases
(because sources.buildroot.net would pick up the tarball with the new
hash, and old Buildroot releases would no longer be able to pick up
the tarball with the old hash, neither from Github nor from the
Buildroot mirror).

So, we simply bump to a newer version of mongoose. This way, old
Buildroot releases will continue to fetch Mongoose 6.7 from the
Buildroot mirror, with the old hash matching. New Buildroot releases
will be using the new Mongoose version, with a correct hash that
allows to download from Github successfully.

The hash of the license file has changed, due to a change in the
copyright years.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongoose: add hash for license file

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongoose: add security patch fixing CVE-2018-10945

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python3: add optional dependency on bluez5_utils-headers

When python3 depends on bluez5_utils-headers,
python3 is build with bluetooth support.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: select bluez5_utils-headers is bluez5_utils is enabled]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

bluez5_utils-headers: new package

Header files from bluez utils version 5.x.

Separated headers are required to break circular dependencies
when python3 is built with bluetooth support.

This is a blind option, it will be automatically selected by python3
when bluez5_utils is enabled.

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Arnout: add comment to keep versions in sync; make it a blind option]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

DEVELOPERS: add myself for python*

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

postgresql: disable spinlock support for riscv64

Fixes:
 - http://autobuild.buildroot.org/results/deebc4b8f615e1216279d6587e91f5654da2ad68

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/postgresql: bump version to 11.0

Release notes: https://www.postgresql.org/about/news/1894/

Added md5 hash provided by upstream.

To fix build errors "MAKELEVEL=0" is required by upstream in MAKE_OPTS:
https://www.postgresql-archive.org/BUG-15407-minor-build-depends-on-MAKELEVEL-being-0-at-top-Makefile-td6047685.html#a6047709

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: add a comment in the .mk file about MAKELEVEL=0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/opengl/opencl: new virtual package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Valentin Korenblit<valentinkorenblit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/clang: default linker to the cross GNU

By default clang is assuming the system linker /usr/bin/ld.  This
patchset updates the default to point at the cross toolchain ld.

Previously clang had been used on target only, this update is
required for host clang/clang++ to be used as a frontend for
cross-compiling.

Example build command:

output/host/bin/clang++ -mcpu=cortex-a53  \
  --sysroot /<abs path>/output/staging/ \
  -B /<abs path>/output/host/opt/ext-toolchain/ \
  foobar.cc -o foobar

Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: remove BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE

Since commit 8f8e9162fae5fdc1788dcf33f02b20ddaa5e6846 ("package/gcc:
do not mourn avr32 for too long..."), in which we dropped AVR32
support, the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is always
'y'. Therefore, it is totally useless to keep this option around, and
this commit removes it, making the corresponding code unconditional
along the way.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: introduce BR2_GCC_SUPPORTS_LIBCILKRTS

libcilkrts was introduced in gcc 4.9, and removed in gcc
8.x. Therefore, it does not make sense to pass --disable-libcilkrts in
gcc 8.x and higher. This commit introduces BR2_GCC_SUPPORTS_LIBCILKRTS
that allows the makefile code to know if the selected gcc version
supports libcilkrts or not.

This new option mainly allows to annotate the fact that libcilkrts
exists in gcc [4.9, 7] and that once we have dropped support for those
gcc versions, the libcilkrts related logic can be removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: disable libcilkrts when there is no thread support

The libcilkrts configure script errors out with "Pthreads are required
to build libcilkrts" if the C library doesn't have thread support. To
fix that, we disable libcilkrts when thread support is not available.

This issue was not noticed until now, because we only regularly build
a no-thread toolchain for ARM, and libcilkrts was enabled on ARM only
starting in gcc 7.x.

This fixes the build of no-thread toolchains on architectures where
libcilkrts is supported, i.e x86/x86-64, ARM and Sparc.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mender: use MENDER_PKGDIR to access local files

Utilize the predefined variable MENDER_PKGDIR which points to the
directory containing mender.mk and Config.in, along with the local
files.

One benefit is also that it works when BR2_EXTERNAL is used, which
makes it easier to "backport" this to an older external tree.

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ca-certificates: create ca-certificates.crt reproducibly

Sort the certificates into alphabetical order so the contents of
ca-certificates.crt can be built reproducibly.

Note: The certificates are sorted uppercase then lowercase filenames
so the contents of ca-certificates.crt matches the source debian package.

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ca-certificates: fix rebuilds

Rebuilding ca-certificates using make ca-certificates-rebuild
caused duplicate certificates to be installed in the target. Its build
system is broken: it doesn't detect that the output file already exists,
and instead of overwriting it, a duplicate is generated under a
different name. The net effect is that all certificates are installed
twice after rebuild.

Fix this by cleaning the build directory before building the package.

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ca-certificates: don't hash certificates.crt

c_rehash looks at all files in /etc/ssl/certs, generates the hash for
the certificates in them, and makes a symlink from the hash to the
certificate file.

However, ca-certificates.crt is also installed in /etc/ssl/certs and
it contains all the certificates. c_rehash will take one of them (the
first?) and create a symlink from that hash to ca-certificates.crt.
Usually, this results in an error like:

WARNING: Skipping duplicate certificate ca-certificates.crt

and all is well. However, depending on filesystem order,
ca-certificates.crt may come first, and the actual certificate is
not symlinked.

To fix this install certificates.crt to /etc/ssl/certs *after* we run
c_rehash to prevent it getting hashed by mistake.

Note: $(TARGET_DIR)/etc/ssl/certs/ is already removed during install so
this fix also works for rebuilds.

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/odroidxu4: new defconfig

This patch provides support for the board Odroid XU4. It uses a recent
4.14 kernel released by Hardkernel, and the current u-boot 2017.05
also from Hardkernel.

Signed-off-by: Pierre CROKAERT <pct@crookies.net>
[Thomas:
 - Update DEVELOPERS file
 - Update .gitlab-ci.yml file
 - Simplify the boot.ini script
 - Add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14 option
 - Add BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS since a
   VFAT filesystem is generated
 - Keep the default root filesystem size, since it is sufficient.
 - Reduce the size of the VFAT filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

wireguard: bump version to 0.0.20181018

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mjpg-streamer: needs headers >= 3.16

Upstream commit

https://github.com/jacksonliam/mjpg-streamer/commit/29fb2b9a65630721c539a216225288fba9497c49#diff-fc82978386df1046ac9aac8cbe0a129eR825

added the usage of V4L2_EVENT_SOURCE_CHANGE which was added to kernel
version 3.16 with commit "[media] v4l: Add source change event":
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/include/uapi/linux/videodev2.h?id=3cbe6e5bcad0b102c06b9c6029fda75630045475

To compare:
- linux 3.15 without the commit:
  https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/include/uapi/linux/videodev2.h?h=linux-3.15.y
- linux 3.16 is the first kernel with the commit:
  https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/include/uapi/linux/videodev2.h?h=linux-3.16.y

Fixes
http://autobuild.buildroot.net/results/4f8/4f8dc7520ee692c665167fda69dc3af66263008f/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nss-myhostname: Add package

nss-myhostname is helpful to resolve local hostname without domain.
For instance, if we set hostname to myboard and ping myboard
without .local suffix, it fails if /etc/hosts stays unchanged.

nss-myhostname modifies /etc/nsswitch.conf file.
It set myhostname resolution just after files in hosts line,
for example:
    hosts: files myhostname mdns4_minimal [NOTFOUND=return] dns

This choice comes from Debian commit [1] and Yocto recipe [2].
Also, nss-myhostname author suggests myhostname should be used as
a backup and appended at the end of hosts line. Both choices are valid.

Discussion on Debian bug tracker [3] gives some details on issue
that may occurs using nss-myhostname (see fqdn).

Note nss-myhostname is already included in systemd, so ensure is conflicts
with it.

[1] http://git.nomeata.de/?p=libnss-myhostname.git;a=commit;h=5104d7f0045df55ee8be526e8c84078750e1e0ed
[2] https://git.yoctoproject.org/cgit.cgi/poky/plain/meta/recipes-support/nss-myhostname/nss-myhostname_0.3.bb
[3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=756224

[Peter: simplify sed invocation, adjust Config.in]
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nss-mdns: do not unconditionally override hosts: line in nsswitch.conf

Instead, add mdns4_minimal / mdns4 around the dns entry if missing.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nss-mdns: drop nsswitch.conf installation logic

With the nsswitch.conf installation logic moved to the post-install-install
hook of the toolchain package, it is guaranteed to be available when
nss-mdns is run - So drop the logic.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: move glibc nsswitch.conf handling to a post-target hook

nsswitch.conf is processed both by the toolchain, nss-mdns and
nss-myhostname without any guaranteed ordering in between.

The toolchain package ensures that nsswitch.conf is available, and the two
nss-* packages tweaks the content, so the toolchain processing should run
before the nss-* ones.  Toolchain is a dependency of all the packages, so
ensure this is done by moving the toolchain handling to a
post-target-install hook.

Also move the variable to toolchain/toolchain/toolchain.mk where the virtual
toolchain package is defined for clarity.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nss-mdns: move hook from post-install to finalize

Both nss-mdns and nss-myhostname patch nsswitch.conf file so it needs to be
done at the final stage to support per-package host/target directories.

[Peter: reword]
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "cargo-bin: bump version to 0.30.0"

This reverts commit 15c00b9a235d8c087c37c9ad7770f5babbe6348a, because
the hashes do not match the upstream tarballs. We need to understand
what happened rather than blindly fixing the hashes.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-fastentrypoints: new package

host-package that is able to shorten the load time of entry_points declared
in setup.py of python packages.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

core: detect and reject build paths which contain an '@'

gcc does not build when the srcdir path contains a '@', because that
path is then substitued in a texi file as argument to an @include
directive. But then, the '@' in the path will start a command evaluation
of its own, thus breaking the build. For example, with a $(O) path set
to /home/ymorin/dev/buildroot/O/to@ti :

    perl ../../gcc/../contrib/texi2pod.pl ../../gcc/doc/invoke.texi > gcc.pod
    ../../gcc/doc/invoke.texi:1678: unknown command `ti'
    ../../gcc/doc/invoke.texi:1678: @include: could not find /home/ymorin/dev/buildroot/O/to/build/host-gcc-initial-7.3.0/build/gcc/../../gcc/../libiberty/at-file.texi

[Peter: use findstring instead of subst/compare]
Reported-by: c32 on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xerces: fix build without pthread

Don't fail when pthreads is not available

Fixes:
 - http://autobuild.buildroot.org/results/63cc4d3d69db19d0c639437d6996f881888a926b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external-arm-aarch64-be: fix check-package warning

Fixes:

toolchain/toolchain-external/toolchain-external-arm-aarch64-be/toolchain-external-arm-aarch64-be.mk:12: consecutive empty lines

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/glibc: fix typo in hash file

Fixes:

package/glibc/arc-2018.03-release/glibc.hash:4: expected three fields (http://nightly.buildroot.org/#adding-packages-hash)
package/glibc/arc-2018.03-release/glibc.hash:4: unexpected type of hash (http://nightly.buildroot.org/#adding-packages-hash)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: add fortran support option for custom external toolchains

If a custom external toolchain is used, we can't enable the fortran
support. Add a new option for that.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt download site update

The download link was broken, former qt versions are stored into a
distinct location.

Signed-off-by: Francois Gerin <francois.gerin@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5wayland: remove legacy compile-without-QtQuick patch

Patch was taken from upstream [1], removing it fixes [2]:

  Applying 0001-fix-compilation-without-QtQuick.patch using patch:
  patching file src/compositor/compositor_api/compositor_api.pri
  Reversed (or previously applied) patch detected!  Skipping patch.
  3 out of 3 hunks ignored -- saving rejects to file src/compositor/compositor_api/compositor_api.pri.rej
  patching file src/compositor/hardware_integration/qwlhardwarelayerintegration_p.h
  Reversed (or previously applied) patch detected!  Skipping patch.
  1 out of 1 hunk ignored -- saving rejects to file src/compositor/hardware_integration/qwlhardwarelayerintegration_p.h.rej

[1] http://code.qt.io/cgit/qt/qtwayland.git/commit/?id=2c48ee65e8c3b894caec214641723d0777fc60b8
[2] http://autobuild.buildroot.net/results/0d31817bb4d416d01f4d1bec3e22ce0e5b2ca1c3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: document location of hash files for multi-versions packages

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: drop unversioned hash files

The download infra now knows to look for per-version hash files, so we
can now drop the unversioned hash files.

Instead of removing them, add a comment that redirects the developper to
update the per-version hash files instead (so they do not re-add a
unversioned one in the future).

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël Portay <gael.portay@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

core/download: do not hard-code the path to the package hash file

Now that packges may have hashes for their downloaded files in a
versioned subdir or in the unversioned hash file, we can no longer
hard-code the path to the package hash file anymore.

Instead, we now make use of the per-package variable, that points to the
package hash file.

Note: of the packages for which we offer a version choice, almost none,
but some of the qt5 ones, have a per-version hash file, so we still use
the unversioned hash file for them. As for the few qt5 packages that do
have a per-version hash file for their licensing terms, they've already
been updated to duplicate their download hashes in both the unversioned
and per-version hash files. So, one way or the other, no hash check
would go missing with this change.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package: prepare for per-version hash files

The Qt5 packages may have different licensing terms between the two
versions we support, and in some cases, those different terms are
expressed in similarly named files, like files named plain 'LICENSE' for
example.

Similarly, glibc also has different license files, especially since the
arc version still has libidn, which got dropped from upstream.

This is problematic, because, in a .hash file, we can't store two
different hashes for the same file. We've started to handle this case by
moving the licenses hashes to the per-version sub directories.

However, the hashes for the downloads are still stored inside the non-
versioned hash file of the package, which is not totally coherent: if we
have a per-version hash file, it should list all the hases for that
version, downloads included, and there should be no unversioned hash
file.

In preparation for this, we duplicate the downloads hashes from the main
hash files, and into the versioned ones. Once the download infra learns
to look for those hashes in these per-version subdirs, we'll remove the
unversioned hash files.

Note that, now that we have versioned hash files, the main hash files
will not be used to check license files, so we can already drop the
hashes for license files from the main hash files.

Note also that there are a few other packages for which we support
different versions (binutils, gcc, gdb, lua, xserver_xorg-server,
uboot), but none of those have different licensing terms due to the
version. Qt5 and glibc are alone in this case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël Portay <gael.portay@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

legal-info: use the per-package variable to get the hash file

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

core: add a variable that points to the package's hash file

When a package has a version selection (e.g. Qt5), the licensing terms
may be different across versions, but lie in similarly named files (e.g.
'LICENSE').

However, when we check a file, all the hashes for it must match. So, we
can't have the hashes for two different content of the same file. We
overcame that limitation in the legal-license-file macro, which checks
whether a package has a .hash file in a versioned subdir.

For consistency, we would like to also store the source hashes in that
per-version subdir.

Rather than reconstruct the path to the hash file everywhere we need it,
add a variable that points to it.

Existing users will be converted over in followup patches.

Note: the check for a missing hash file is done in the check-hash helper
script, so this variable must always yield a filename, even of a missing
file, thus we do not use $(wildcard...) to resolve the hash file path;
we use $(wildcard...) only to check if the versioned .hash file exists.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mjpg-streamer: bump version

This bump includes

https://github.com/jacksonliam/mjpg-streamer/commit/588db286da461ac5c02277b511ab58a7bf3f752f
https://github.com/jacksonliam/mjpg-streamer/commit/3b7d04d28a39bc697f5bd77f1072430692ac9f8b

which fixes building without c++:

http://autobuild.buildroot.net/results/1da/1da75a9d9b6e4d04d39117d2915c1d195dcae002/
http://autobuild.buildroot.net/results/3da/3da3f4099ccf62a314c099c5720dd5b1e9463914/
http://autobuild.buildroot.net/results/104/10438190453bd7ef7cc157929e74a9ffce9f7fdf/
http://autobuild.buildroot.net/results/91f/91fa80348db0c248649fe003df2dfa854f37a5a2/
http://autobuild.buildroot.net/results/4d7/4d7e722cf85a54d2813715e6b4ca1dd793e6d237/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mjpg-streamer: fix typo in opencv3 dependencies

mjpg-streamer needs these OpenCV3 modules:
https://github.com/jacksonliam/mjpg-streamer/blob/master/mjpg-streamer-experimental/plugins/input_opencv/CMakeLists.txt#L4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luvi: add license hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/luvi: bump version to 2.8.0"

This reverts commit ac6fedda6b43996545ff498cd19a781698a96050.

Quoting Jörg Krause:
http://lists.busybox.net/pipermail/buildroot/2018-August/228534.html

"The version bump as version 2.8.0 does only updates the projects
 submodules, which we are not using at all. Instead, we always build
 luvi with dependencies provided as packages in Buildroot."

[Peter: drop autobuilder reference, issue is in luv, not luvi]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: bump to version 3.5

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

perl-netaddr-ip: build the XS version

the generated subdirectory Makefiles are now fixed

now, the Pure Perl version is only useful when BR2_STATIC_LIBS

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

perl: fix the generated subdirectory Makefiles

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

scancpan: remove optional dependency

there are also runtime dependency

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

python-click: bump to version 7.0

Add license hash.
License change: LICENSE renamed to LICENSE.rst, and one parahraph
has moved down (no actual content was added/deleted/modified)

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

cargo-bin: bump version to 0.30.0

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

rust: bump version to 1.29.2

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

rust-bin: bump version to 1.29.2

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/get-developers: make it callable from elsewhere than the toplevel directory

get-developers tries to open DEVELOPERS in the current directory, so it
breaks when calling it from elsewhere than the toplevel Buildroot directory.

Traceback (most recent call last):
  File "../utils/get-developers", line 107, in <module>
    __main__()
  File "../utils/get-developers", line 26, in __main__
    devs = getdeveloperlib.parse_developers(os.path.dirname()
  File "/home/peko/source/buildroot/utils/getdeveloperlib.py", line 161, in parse_developers
    with open(os.path.join(basepath, "DEVELOPERS"), "r") as f:
IOError: [Errno 2] No such file or directory: '/home/peko/source/buildroot/output-foo/DEVELOPERS'

Fix it by instead figuring out where the DEVELOPERS file is relative to the
location of get-developers (E.G. one level up).

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout:
  - add realpath to support a symlinked get-developers script;
  - pass devs_dir argument to check_developers() to support -c in subdir;
  - convert basepath to absolute path to support -f option.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: add explanation for the AUTORECONF = YES

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gvfs: enable gphoto2

Enable gphoto2 if libgphoto2 and libgudev are available

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: add optional gcr support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: enable cdda backend

Enable cdda if libcdio-paranoia and libgudev are available

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: enable admin backend

Enable admin backend if libcap and polkit are available

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: use explicit --enable-gudev option

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gvfs: add optional libusb support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libclc: new package

This patch provides libclc, an open source implementation of the
library requirements of the OpenCL C programming language, as
specified by the OpenCL 1.1 Specification. It is intended to be used
with Clover (Mesa3D's OpenCL implementation for AMD GPUs.

It needs to be compiled with host-clang, as it generates LLVM IR bitcode
files containing device builtin functions for each target.

Currently, libclc supports AMDGCN, R600 and NVPTX targets.

As OpenCL kernels can be built dynamically on the target using libclang and
libLLVM, it is necessary to have clc headers installed on the target. Buildroot
removes /usr/include in its target-finalize step, so clc headers are installed to
/usr/share/clc.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
 - fix license information as noticed by Romain
 - add comment to explain why --includedir=/usr/share is used]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: disable opencl

Preliminary patch to prevent Mesa from building OpenCL lib as
soon as libclc is available.

Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: test_hardening fix flake8 whitespace

Resolves:
support/testing/tests/core/test_hardening.py:25:42: E231 missing whitespace after ','

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website/sponsors: credit Smile for the LLVM/Clang internship

Update Smile url and logo.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments/autobuild: test the ARM AArch64 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: add Arm AArch64-BE toolchain 8.2-2018.08

This is the same toolchain that was previously distributed by Linaro. [1]

Switch default toolchain as this toolchain supersed the Linaro AArch64-BE toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.

[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: add Arm AArch64 toolchain 8.2-2018.08

This is the same toolchain that was previously distributed by Linaro. [1]

Switch default toolchain as this toolchain supersed the Linaro AArch64 toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.

Tested with qemu_aarch64_virt_defconfig.

[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: add Arm ARM toolchain 8.2-2018.08

This is the same toolchain that was previously distributed by Linaro. [1]

Switch default toolchain as this toolchain supersed the Linaro ARM toolchain.
Only x86_64 host are supported, so keep Linaro toolchain for x86 host.

Tested with qemu_arm_vexpress_defconfig.

[1] https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/cubieboard2: Update kernel to 4.18.14 and U-Boot to 2018.09

The board is well supported in upstream projects so let's update kernel
and U-Boot to the latest and greatest versions.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

spice: security bump to version 0.14.1

Fixes CVE-2018-10873: A vulnerability was discovered in SPICE before version
0.14.1 where the generated code used for demarshalling messages lacked
sufficient bounds checks.  A malicious client or server, after
authentication, could send specially crafted messages to its peer which
would result in a crash or, potentially, other impacts.

Drop patches as they are now upstream.

Add host-pkgconf as the configure script uses pkg-config.  Drop removed
--disable-automated-tests configure flag.

Add optional opus support, as that is now supported and needs to be
explicitly disabled to not use.  Explicitly disable optional gstreamer
support for now as the dependency tree is fairly complicated.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

spice-protocol: bump version to 0.12.14

Needed by spice 0.14.x

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/wandboard: Update kernel to 4.18.14 and U-Boot to 2018.09

The board is well supported in upstream projects so let's update kernel
and U-Boot to the latest and greatest versions.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fs/common: allow custom user table to override package-defined users

Currently, when a custom user table and a package define the same user,
the settings from the package takes precedence over the ones from the
custom user table.

However, it makes sense to allow the settings from the custom user table
take precedence. For example, it would allow redirecting the user's
home directory to an alternate location (e.g. away from tmp and into a
partition that is persistent).

The support/scripts/mkusers script will only retain settings from the
latest definition it finds.

Thus, by passing the custom user table after the package defined users,
it is possible to override the package provided user definitions.

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

psmisc: bump to version 23.2

Drop patch #1; applied upstream.

Drop patch #2; not needed since we don't autoreconf, and the issue is
fixed upstream anyway.

Add license hash.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

psmisc: correct license

The license heading in source files includes the "or any later"
language.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-twisted: bummp to version 18.9.0

Remove patch since the new version supports Python 3.7
Change in LICENSE: addition of a developer to the list (hash updated).

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-autobahn: bump to version 18.10.1

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-requests: bump to version 2.20.0

LICENSE update: replaced http address with https.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-certifi: bump to version 2018.10.15

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2018.10.0

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mdadm: fix mdmon build without threads

Commit 45498bbc62d8df (mdadm: also install mdmon) enabled build of hte
mdmon utility. This utility requires USE_PTHREADS make variable
undefined to build when threads are not supported.

Fixes:
http://autobuild.buildroot.net/results/4bd/4bdd03b1d8f30ef32177727aae46d8cf54fbc35e/

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libarchive: security bump to version 3.3.3

Fixes CVE-2017-14501: An out-of-bounds read flaw exists in
parse_file_info in archive_read_support_format_iso9660.c in libarchive
3.3.2 when extracting a specially crafted iso9660 iso file, related to
archive_read_format_iso9660_read_header.

Drop upstream patches.

Use upstream provided tarball hash.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/config-fragments: add RISC-V 64-bit to autobuild configs

Add a minimal RISC-V 64-bit autobuild configuration for the
internal toolchain with glibc.

Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: bump version to 7.2.11

Changelog: http://www.php.net/ChangeLog-7.php#7.2.11

Removed patch 0007, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 18.2.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>