* dwarf2dbg.h (dwarf2_loc_directive_seen): New.
* dwarf2dbg.c (loc_directive_seen): Make external and rename to...
(dwarf2_loc_directive_seen): ...this.
(dwarf2_emit_insn, dwarf2_consume_line_info)
(dwarf2_emit_label, dwarf2_directive_loc): Use new name.

* dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info.

* dwarf2dbg.c (dwarf2_consume_line_info): New.
(dwarf2_emit_insn): Use it here.
(dwarf2_directive_loc): Fix check for consecutive .loc directives
when debug_type is DEBUG_DWARF2.
* dwarf2dbg.h (dwarf2_consume_line_info): New prototype.
* config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info.
(md_assemble): Likewise.
testsuite/
* gas/lns/lns.exp: Run lns-common-1 with alternate source for ia64.
* gas/lns/lns-common-1-ia64.s: New file.

* readelf.c (is_32bit_abs_reloc): Add support for NIOS relocs.
   (is_64bit_abs_reloc): Add support for HPPA relocs.
   (is_16bit_abs_reloc): Add support for NIOS relocs.

2007-11-19  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (register_sim_regno): Add gdbarch as parameter.
* gdbarch.{c,h}: Regenerate.

* arch-utils.h (legacy_register_sim_regno): Add gdbarch as parameter.
* score-tdep.c (score_register_sim_regno): Likewise.
* sim-regno.h (one2one_register_sim_regno): Likewise.

* arch-utils.c (legacy_register_sim_regno): Add gdbarch as parameter.
Replace current_gdbarch by gdbarch.
* sh-tdep.c (sh_sh2a_register_sim_regno)
(sh_dsp_register_sim_regno): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* mips-tdep.c (mips_register_sim_regno): Likewise.
* m32c-tdep.c (m32c_register_sim_regno): Likewise.
* frv-tdep.c (frv_register_sim_regno): Likewise.
* arm-tdep.c (arm_register_sim_regno): Likewise.
* remote-sim.c (one2one_register_sim_regno): Likewise.

* elf-bfd.h (bfd_elf_perform_complex_relocation): Update prototype.
* elflink.c (bfd_elf_perform_complex_relocation): Return status.
Don't print reloc overflow message.
* elf32-mep.c (mep_elf_relocate_section): Handle status from
bfd_elf_perform_complex_relocation.

*** empty log message ***

daily update

*** empty log message ***

daily update

(Set Breaks): Fix a typo in last change.

* config/tc-mips.c (md_parse_option): Match mips_optimize to the -O
option supplied, but still keep mips_optimize == 2 as default value.

[ld/testsuite/ChangeLog]
* ld-mips-elf/attr-gnu-4-14.d, ld-mips-elf/attr-gnu-4-41.d:
Adjust warning message for -mfp64 flag.
* ld-mips-elf/attr-gnu-4-5.s, ld-mips-elf/attr-gnu-4-04.d,
ld-mips-elf/attr-gnu-4-51.d, ld-mips-elf/attr-gnu-4-05.d,
ld-mips-elf/attr-gnu-4-15.d, ld-mips-elf/attr-gnu-4-24.d,
ld-mips-elf/attr-gnu-4-25.d, ld-mips-elf/attr-gnu-4-34.d,
ld-mips-elf/attr-gnu-4-35.d, ld-mips-elf/attr-gnu-4-42.d,
ld-mips-elf/attr-gnu-4-43.d, ld-mips-elf/attr-gnu-4-44.d,
ld-mips-elf/attr-gnu-4-45.d, ld-mips-elf/attr-gnu-4-40.d,
ld-mips-elf/attr-gnu-4-14.d: New testcases files.
* ld-mips-elf/mips-elf.exp: Run new testcases.

[binutils/ChangeLog]
* readelf.c (display_mips_gnu_attribute): Recognize -mips32r2 -mfp64
objects.

[include/ChangeLog]
* elf/mips.h (Tag_GNU_MIPS_ABI_FP): Mention -mips32r2 -mfp64 variant
in comment.

[bfd/ChangeLog]
* elfxx-mips.c (mips_elf_merge_obj_attributes): Handle -mips32r2
-mfp64 attribute.

[gas/ChangeLog]
* doc/as.texinfo: Document the new attribute value.

* gdb.texinfo (Set Breaks, Disabling): Clarify behavior of
breakpoints with multiple locations.
(Breakpoint Menus): Improve wording.
(Output): Fix last change.

From Craig Silverstein: Quote the symbol name in the ODR violation
message to avoid a gcc collect2 demangling bug.

Fix broken check-in -- forgot to cvs remove file.

* configure.ac (--enable-targets): New configure option.
Collect gdb_target_obs of multiple targets into TARGET_OBS.
Call configure.tgt multiple times, using $targ as operand.
* configure.tgt: Operate on $targ instead of $target.
* configure: Regenerate.
* Makefile.in (ALL_TARGET_OBS): Define.

* NEWS: Mention --enable-targets option.

* mips-tdep.c (show_mipsfpu_command): Do not crash if called when
current architecture is not MIPS.

* cli/cli-setshow.c (do_setshow_command): Use dynamically sized buffer
to construct error message if no argument was supplied.

* i386nbsd-tdep.c (i386nbsd_aout_supply_regset): Remove.
(i386nbsd_aout_regset_from_core_section): Likewise.
(i386nbsd_aout_init_abi): Likewise.
(_initialize_i386nbsd_tdep): Do not register i386nbsd_aout_init_abi.

* vaxnbsd-tdep.c (vaxnbsd_aout_init_abi): Remove.
(_initialize_vaxnbsd_tdep): Do not register vaxnbsd_aout_init_abi.

* amd64fsdb-tdep.c (amd64fbsd_sigtramp_start_addr): Use ULL suffix.
(amd64fbsd_sigtramp_end_addr): Likewise.

* iq2000-tdep.c (iq2000_pointer_to_address): Fix argument type.
(iq2000_address_to_pointer): Likewise.
(iq2000_frame_prev_register): Likewise.
(iq2000_extract_return_value): Use regcache_cooked_read_unsigned
instead of regcache_cooked_read into CORE_ADDR variable.
(iq2000_return_value): Fix argument types.

* m32r-rom.c (m32r_load_section): Fix printf argument type.
(m32r_load): Likewise.

* m68kbsd-tdep.c: Include "gdbtypes.h".
* Makefile.in: Update dependencies.

* mn10300-tdep.c (mn10300_frame_unwind_cache): Fix aliasing violation.

* nto-tdep.c (LM_ADDR): Do not refer to no-longer-existing
lmo->l_addr_size element.

* remote-m32r-sdi.c (m32r_xfer_memory): Use paddr to print address.
(m32r_insert_breakpoint): Likewise.
(m32r_remove_breakpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
(m32r_remove_watchpoint): Likewise.
(m32r_load): Fix printf argument type.

* xtensa-tdep.c (xtensa_regset_from_core_section): Fix printf
argument type.
(xtensa_frame_this_id): Do not cast pointers to "int" for output.
(xtensa_frame_prev_register): Likewise.
(xtensa_push_dummy_call): Likewise.

* config/alpha/alpha-linux.mt: Remove file.
* config/alpha/alpha.mt: Remove file.
* config/alpha/alpha-osf1.mt: Remove file.
* config/alpha/fbsd.mt: Remove file.
* config/alpha/nbsd.mt: Remove file.
* config/alpha/obsd.mt: Remove file.
* config/arm/embed.mt: Remove file.
* config/arm/linux.mt: Remove file.
* config/arm/nbsd.mt: Remove file.
* config/arm/obsd.mt: Remove file.
* config/arm/wince.mt: Remove file.
* config/avr/avr.mt: Remove file.
* config/cris/cris.mt: Remove file.
* config/frv/frv.mt: Remove file.
* config/h8300/h8300.mt: Remove file.
* config/i386/cygwin.mt: Remove file.
* config/i386/fbsd64.mt: Remove file.
* config/i386/fbsd.mt: Remove file.
* config/i386/i386gnu.mt: Remove file.
* config/i386/i386.mt: Remove file.
* config/i386/i386sol2.mt: Remove file.
* config/i386/linux64.mt: Remove file.
* config/i386/linux.mt: Remove file.
* config/i386/mingw.mt: Remove file.
* config/i386/nbsd64.mt: Remove file.
* config/i386/nbsd.mt: Remove file.
* config/i386/nto.mt: Remove file.
* config/i386/obsd64.mt: Remove file.
* config/i386/obsd.mt: Remove file.
* config/i386/sol2-64.mt: Remove file.
* config/ia64/ia64.mt: Remove file.
* config/ia64/linux.mt: Remove file.
* config/iq2000/iq2000.mt: Remove file.
* config/m32c/m32c.mt: Remove file.
* config/m32r/linux.mt: Remove file.
* config/m32r/m32r.mt: Remove file.
* config/m68hc11/m68hc11.mt: Remove file.
* config/m68k/linux.mt: Remove file.
* config/m68k/monitor.mt: Remove file.
* config/m68k/nbsd.mt: Remove file.
* config/m68k/obsd.mt: Remove file.
* config/m88k/obsd.mt: Remove file.
* config/mep/mep.mt: Remove file.
* config/mips/embed.mt: Remove file.
* config/mips/irix5.mt: Remove file.
* config/mips/irix6.mt: Remove file.
* config/mips/linux.mt: Remove file.
* config/mips/nbsd.mt: Remove file.
* config/mips/obsd64.mt: Remove file.
* config/mn10300/linux.mt: Remove file.
* config/mn10300/mn10300.mt: Remove file.
* config/mt/mt.mt: Remove file.
* config/pa/hppahpux.mt: Remove file.
* config/pa/hppa.mt: Remove file.
* config/pa/linux.mt: Remove file.
* config/pa/obsd.mt: Remove file.
* config/powerpc/aix.mt: Remove file.
* config/powerpc/linux.mt: Remove file.
* config/powerpc/nbsd.mt: Remove file.
* config/powerpc/obsd.mt: Remove file.
* config/powerpc/ppc-eabi.mt: Remove file.
* config/s390/s390.mt: Remove file.
* config/score/embed.mt: Remove file.
* config/sh/embed.mt: Remove file.
* config/sh/linux.mt: Remove file.
* config/sh/nbsd.mt: Remove file.
* config/sh/obsd.mt: Remove file.
* config/sh/sh64.mt: Remove file.
* config/sparc/embed.mt: Remove file.
* config/sparc/fbsd.mt: Remove file.
* config/sparc/linux64.mt: Remove file.
* config/sparc/linux.mt: Remove file.
* config/sparc/nbsd64.mt: Remove file.
* config/sparc/nbsd.mt: Remove file.
* config/sparc/obsd64.mt: Remove file.
* config/sparc/obsd.mt: Remove file.
* config/sparc/sol2-64.mt: Remove file.
* config/sparc/sol2.mt: Remove file.
* config/sparc/sparc64.mt: Remove file.
* config/sparc/sparc.mt: Remove file.
* config/spu/spu.mt: Remove file.
* config/v850/v850.mt: Remove file.
* config/vax/nbsd.mt: Remove file.
* config/vax/obsd.mt: Remove file.
* config/vax/vax.mt: Remove file.
* config/xstormy16/xstormy16.mt: Remove file.
* config/xtensa/xtensa.mt: Remove file.

* configure.tgt (gdb_target_cpu): Remove.  Do not set anywhere.
(gdb_target): Likewise.
(gdb_target_obs): Document.  Set for every target to contents
of TDEPFILES in former .mt makefile fragment.

* configure.ac (TARGET_OBS): Define.
(target_makefile_frag, gdb_target_cpu): Do not define.
* configure: Regenerate.

* Makefile.in (MT_FLAGS): Remove.
(GLOBAL_CFLAGS): Update.
(TARGET_OBS): Substitute from configure.
(DEPFILES): Remove TDEPFILES, add TARGET_OBS.
(@target_makefile_frag@): Remove.

doc/ChangeLog:

* Makefile.in (Makefile): Do not depend on target_makefile_frag.

testsuite/ChangeLog:

* Makefile.in (Makefile): Do not depend on target_makefile_frag.
(target_cpu): Remove.

* config/arm/embed.mt (SIM_OBS, SIM): Remove.
* config/avr/avr.mt (SIM_OBS, SIM): Remove.
* config/frv/frv.mt (SIM_OBS, SIM): Remove.
* config/h8300/h8300.mt (SIM_OBS, SIM): Remove.
* config/iq2000/iq2000.mt (SIM_OBS, SIM): Remove.
* config/m32c/m32c.mt (SIM_OBS, SIM): Remove.
* config/m32r/linux.mt (SIM_OBS, SIM): Remove.
* config/m32r/m32r.mt (SIM_OBS, SIM): Remove.
* config/m68hc11/m68hc11.mt (SIM_OBS, SIM): Remove.
* config/mips/embed.mt (SIM_OBS, SIM): Remove.
* config/mips/linux.mt (SIM_OBS, SIM): Remove.
* config/mips/nbsd.mt (SIM_OBS, SIM): Remove.
* config/mn10300/mn10300.mt (SIM_OBS, SIM): Remove.
* config/powerpc/linux.mt (SIM_OBS, SIM): Remove.
* config/powerpc/nbsd.mt (SIM_OBS, SIM): Remove.
* config/powerpc/ppc-sim.mt: Remove file.
* config/sh/embed.mt (SIM_OBS, SIM): Remove.
* config/sh/linux.mt (SIM_OBS, SIM): Remove.
* config/sh/nbsd.mt (SIM_OBS, SIM): Remove.
* config/sh/sh64.mt (SIM_OBS, SIM): Remove.
* config/sparc/embed.mt (SIM_OBS, SIM): Remove.
* config/v850/v850.mt (SIM_OBS, SIM): Remove.
* config/xstormy16/xstormy16.mt (SIM_OBS, SIM): Remove.

* configure.tgt (gdb_sim): Document variable.
(arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*): Set it.
(avr-*-*): Likewise.
(frv-*-*): Likewise.
(h8300-*-*): Likewise.
(iq2000-*-*): Likewise.
(m32c-*-*): Likewise.
(m32r*-*-linux*): Likewise.
(m32r*-*-*): Likewise.
(m68hc11*-*-*|m6811*-*-*): Likewise.
(mips*-*-*): Likewise.
(mips*-*-linux*): Likewise.
(mips*-*-netbsd* | mips*-*-knetbsd*-gnu): Likewise.
(mn10300-*-*): Likewise.
(powerpc-*-linux* | powerpc64-*-linux*): Likewise.
(powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu): Likewise.
(powerpc*-*-*): Use ppc-eabi target.  Conditionally set gdb_sim.
(sh*): Set gdb_sim.
(sh-*-linux*): Likewise.
(sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu): Likewise.
(sh64-*-elf*): Likewise.
(sparc-*-rtems*): Likewise.
(v850*-*-elf): Likewise.
(xstormy16-*-*): Likewise.

* configure.ac (IGNORE_SIM, IGNORE_SIM_OBS): Do not set.
(SIM, SIM_OBS): Set depending on ${ignore_sim} and ${gdb_sim}.
* configure: Regenerate.
* Makefile.in (SIM, SIM_OBS): Substitute from configure.
(@IGNORE_SIM@, @IGNORE_SIM_OBS@): Remove.

* configure.tgt (gdb_osabi, build_gdbserver): Comment variables.
(arm*-*-*): Do not set obsolete build_rdi_share variable.

(*-*-freebsd* | *-*-kfreebsd*-gnu): Remove generic case, replace by ...
(alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
(i[34567]86-*-freebsd* | i[34567]86-*-kfreebsd*-gnu)
(sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu): ... specific cases.
(x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu): Re-sort.

(xscale-*-*): Merge into arm*-*-* case.
(fido-*-elf*): Merge into m68*-*-elf* case.
(m68*-*-aout*, m68*-*-coff*, m68*-*-elf*, m68*-*-rtems*,
m68*-*-uclinux*): Merge cases.
(powerpc-*-linux*, powerpc64-*-linux*): Merge cases.
(sh-*-coff*, sh-*-elf*): Merge into sh* case.

* configure.tgt: Reformat main case statement.

* configure.ac (hostfile, targetfile): Remove.
(GDB_XM_FILE, GDB_TM_FILE): Do not define.
(xm_h, tm_h): Likewise.
(DEPRECATED_TM_FILE, XM_FILE): Do not substitute into Makefile.
* configure, config.in: Regenerate.

* Makefile.in (xm_h, tm_h): Remove.  Update dependencies.
(TAGS): Do not consider DEPRECATED_TM_FILE or XM_FILE.
(clean, local-maintainer-clean): Do not remove xm.h or tm.h.
* defs.h: Do not include "xm.h" or "tm.h".

* gdbarch.sh (verify_gdbarch): Do not dump GDB_XM_FILE or GDB_TM_FILE.
* gdbarch.c: Regenerate.

* config/score/embed.mt: Remove obsolete comment.

*** empty log message ***

daily update

Released gold 0.8

Ignore empty archives.

2007-11-16  Eric B. Weddington  <eric.weddington@atmel.com>

* config/tc-avr.c (mcu_types): Add ATmega32HVB device.
* doc/c-avr.texi: Likewise.

2007-11-16  Eric B. Weddington  <eric.weddington@atmel.com>

* config/tc-avr.c (mcu_types): Add ATmega1284P device.
* doc/c-avr.texi: Likewise.

When looking for ODR violations, only check the file base name.  Also,
never demangle if --no-demangle was used.

* dwarf2.h: Mention the location of the DWARF3 spec on the web.
  (DW_AT_stride_size): Rename to DW_AT_bit_stride.
  (DW_AT_stride): Rename to DW_AT_byte_stride.
* dwarf.c (process_extended_line_op): Add cases for HP extensions to the line ops.
  Mention if an unknown op code is in the user defined range.
  (decode_location_expression): Add cases for HP extensions, the DW_OP_GNU_uninit extension and the DW_OP_call_frame_cfa and DW_OP_bit_piece DWARF3 operators.
  (read_and_display_attr): Correct list of attributes which can reference a location list.
  (read_and_display_attr_value): Add cases for DWARF3 values and HP extensions.
  Correct list of attributes which can reference a location list.
  (get_AT_name): Add cases for DWARF3 values and HP and PGI extensions.

* ld-mn10300/mn10300.exp: Fix the start address of the .bss section for the i1127740.s test.
* elf-m10300.c (mn10300_elf_check_relocs): Fix memory leak and check that bfd_elf_get_elf_syms is only called once.

DW_LNE_end_sequence indicates that the address points to the byte
*after* the current target sequence.

2007-11-16  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (cannot_fetch_register, cannot_store_register): Add gdbarch
as parameter.
* gdbarch.{c,h}: Regenerate.

* alpha-tdep.c (alpha_cannot_fetch_register)
(alpha_cannot_store_register): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
* cris-tdep.c (cris_cannot_fetch_register, cris_cannot_store_register)
(crisv32_cannot_fetch_register)
(crisv32_cannot_store_register): Likewise.
* arch-utils.c (cannot_register_not): Likewise.
* arch-utils.h (cannot_register_not): Likewise.
* hppa-tdep.c (hppa32_cannot_store_register)
(hppa32_cannot_store_register, hppa64_cannot_store_register)
(hppa64_cannot_fetch_register): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_cannot_fetch_register)
(mipsnbsd_cannot_store_register): Likewise.

2007-11-16  Markus Deuling  <deuling@de.ibm.com>

* m32r-rom.c (m32r_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
* ppcnbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register)
(fetch_register, supply_vrregset, fetch_ppc_registers)
(store_altivec_register, store_spe_register, store_register)
(fill_vrregset, store_ppc_registers): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.

* trad-frame.c (trad_frame_alloc_saved_regs): Replace current_gdbarch by
gdbarch.
* user-regs.c (user_reg_map_name_to_regnum): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_return_value): Likewise.
* m32c-tdep.c (m32c_register_reggroup_p): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.

* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Use get_frame_arch to
get at the current architecture by frame_info.
* gcore.c (derive_stack_segment): Likewise.

* shnbsd-nat.c (GETREGS_SUPPLIES): Add gdbarch parameter.
(shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Add
gdbarch to GETREGS_SUPPLIES call.

*** empty log message ***

bfd/ChangeLog:

* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Set udata.p of
synthetic symbol to point to the ELF symbol it was derived from.

gdb/ChangeLog:

* elfread.c (ST_REGULAR, ST_DYNAMIC, ST_SYNTHETIC): New defines.
(elf_symtab_read): Rename DYNAMIC argument to TYPE.  Do not access
ELF-private symbol data when processing synthetic symbols.  Use
udata.p to get at size of ppc64 synthetic 'dot' symbols.
(elf_symfile_read): Pass TYPE argument to elf_symtab_read.

From Cary Coutant: Count textrel with output sections rather than
setting a flag as we add each reloc in the target code.

From Craig Silverstein: Add --strip-debug-gdb.

daily update

* buildsym.h (subfiles): Move ...
* buildsym.c (subfiles): ... to here and make static.

Workaround bug in gcc 4.0.3 STL.

* symmisc.c (maintenance_info_symtabs): Print linetable info.
* doc/gdb.texinfo (Symbols): Update output of "maint info symtabs".

2007-11-15  Markus Deuling  <deuling@de.ibm.com>

* mipsnbsd-tdep.h (SIZEOF_STRUCT_REG, SIZEOF_STRUCT_FPREG): Remove

2007-11-15  Markus Deuling  <deuling@de.ibm.com>

* arm-tdep.c (arm_prologue_this_id): Replace LOWEST_PC by its
expression and use get_frame_arch to replace current_gdbarch by frame's
architecture.
*arm-tdep.h (LOWEST_PC): Remove

Move changelog entries to the right ChangeLog

Apply const qualifier to some users of bp_location.
* breakpoint.h (struct bpstats): Make
the breakpoint_at field point at const bp_location.
* breakpoint.c (bpstat_alloc): Accept const
bp_location.
(breakpoint_here_p, breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p)
(breakpoint_thread_match, bpstat_stop_status)
(read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
const bp_location for iteration.
(print_it_typical, print_bp_stop_message): Use
const bp_location variable.

Make mark_breakpoints_out static.
* breakpoint.h (mark_breakpoints_out): Remove
declaration.
* breakpoint.c (mark_breakpoints_out): Make static.

Prevent clear_command from directly modifying breakpoint list.
* Makefile.in (breakpoint_h): Update dependency.
* breakpoint.c (clear_command): Do not remove
breakpoints from breakpoint_chain.  Collect breakpoints
to delete in a vector.
* breakpoint.h (breakpoint_p): New typedef for pointer to
breakpoint.  Register vector of breakpoint_p.

Remove 'run_cleanup'.
* defs.h (do_run_cleanups, make_run_cleanup): Remove
declarations.
* infcmd.c (run_command_1): Call clear_solib instead
of do_run_cleanups.
* jv-lang.c (java_rerun_cleanup): Remove, for lack of
any use.
* solib.c (solib_cleanup_queued, do_clear_solib): Remove.
(update_solib_lib): Don't setup run cleanup.
(no_shared_libraries): Call clear_solib, not do_clear_solib.
* utils.c (run_cleanup_chain, make_run_cleanup)
(do_run_cleanups): Remove.

Remove CLEAR_SOLIB use.
* corelow.c (core_close): Don't check for CLEAR_SOLIB.
* infcmd.c (attach_command): Likewise.

PR 5328
* opncls.c (separate_debug_file_exists): Use fopen/fread
rather than open/read and open in binary mode.

From Craig Silverstein: Add support for --demangle.

*** empty log message ***

* buildsym.c (start_subfile,start_symtab): Doc fixes.

daily update

gas/

2007-11-14  Tristan Gingold  <gingold@adacore.com>

* config/tc-ia64.c (AR_RUC): Defined.
(ar): Add "ar.ruc".
(specify_resource): Handle AR_RUC like AR_ITC.

gas/testsuite/

2007-11-14  H.J. Lu  <hongjiu.lu@intel.com>

* gas/ia64/dv-raw-err.s: Add tests for ar.ruc.
* gas/ia64/dv-waw-err.s: Likewise.
* gas/ia64/invalid-ar.s: Likewise.

* gas/ia64/regs.s: Add tests for ar.ruc and ar44.

* gas/ia64/dv-raw-err.l: Updated.
* gas/ia64/dv-waw-err.l: Likewise.
* gas/ia64/invalid-ar.l: Likewise.
* gas/ia64/regs.d: Likewise.

opcodes/

2007-11-14  H.J. Lu  <hongjiu.lu@intel.com>

* ia64-ic.tbl: Updated for Itanium 9100 series.
* ia64-raw.tbl: Likewise.
* ia64-waw.tbl: Likewise.
* ia64-asmtab.c: Regenerated.

2007-11-14  Tristan Gingold  <gingold@adacore.com>

* ia64-dis.c (print_insn_ia64): Handle ar.ruc.
* ia64-gen.c (lookup_regindex): Likewise.

From Cary Coutant: Improve i386 shared library TLS support.

bfd/
2007-09-18  Richard Sandiford  <richard@codesourcery.com>

* elfxx-mips.c (mips_got_page_range): New structure.
(mips_got_page_entry): Likewise.
(mips_got_info): Add page_gotno and got_page_entries fields.
(mips_elf_got_per_bfd_arg): Add max_pages field.  Delete
primary_count and current_count fields.
(mips_got_page_entry_hash, mips_got_page_entry_eq): New functions.
(mips_elf_pages_for_range, mips_elf_record_got_page_entry): Likewise.
(mips_elf_get_got_for_bfd): New function, split out from
mips_elf_make_got_per_bfd.  Initialize the page_gotno and
got_page_entries fields when creating a new GOT structure.
(mips_elf_make_got_pages_per_bfd): New function.
(mips_elf_merge_got_with): New function, split out from
mips_elf_make_got_per_bfd.  Merge page entries as well as
non-page entries.  Use the minimum of max_pages and the sum
of the page_gotnos to estimate the number of page entries.
(mips_elf_merge_gots): Use the minimum of max_pages and the
bfd's page_gotno to estimate the number of page entries.
Use the above functions.
(mips_elf_multi_got): Add page entries as well as non-page entries
to the individual per-bfd GOTs.  Initialize got_per_bfd_arg.max_pages.
Initialize the page_gotno and got_page_entries fields when creating
a new primary GOT.  Use the minimum of pages and page_gotno when
adding the number of pages entries to local_gotno.
(mips_elf_create_got_section): Initialize the page_gotno and
got_page_entries fields of the GOT structure.
(mips_elf_rel_relocation_p, mips_elf_read_rel_addend)
(mips_elf_add_lo16_rel_addend, mips_elf_get_section_contents): New
functions, split out from...
(_bfd_mips_elf_relocate_section): ...here.
(_bfd_mips_elf_check_relocs): Record GOT page entries too.
(_bfd_mips_relax_section): Use mips_elf_get_section_contents.
(_bfd_mips_elf_always_size_sections): Use the smaller of the
loadable_size- and page_gotno-derived estimates.

ld/testsuite/
2007-09-18  Richard Sandiford  <richard@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>

* ld-mips-elf/got-page-1.d, ld-mips-elf/got-page-1.s,
* ld-mips-elf/got-page-2.d, ld-mips-elf/got-page-2.s,
* ld-mips-elf/got-page-3.d, ld-mips-elf/got-page-3a.s,
* ld-mips-elf/got-page-3b.s, ld-mips-elf/got-page-3c.s,
* ld-mips-elf/got-page-1.ld: New tests.
* ld-mips-elf/mips-elf.exp: Run them.
* ld-mips-elf/multi-got-1.d, ld-mips-elf/multi-got-no-shared.d,
* ld-mips-elf/tls-hidden2-got.d, ld-mips-elf/tls-hidden2.d,
* ld-mips-elf/tls-hidden3.d, ld-mips-elf/tls-hidden3.got,
* ld-mips-elf/tls-hidden3.r, ld-mips-elf/tls-hidden4.got,
* ld-mips-elf/tls-hidden4.r, ld-mips-elf/tls-multi-got-1.d,
* ld-mips-elf/tls-multi-got-1.got, ld-mips-elf/tls-multi-got-1.r,
* ld-mips-elf/tlsbin-o32.d, ld-mips-elf/tlsbin-o32.got,
* ld-mips-elf/tlsdyn-o32-1.d, ld-mips-elf/tlsdyn-o32-1.got,
* ld-mips-elf/tlsdyn-o32-2.d, ld-mips-elf/tlsdyn-o32-2.got,
* ld-mips-elf/tlsdyn-o32-3.d, ld-mips-elf/tlsdyn-o32-3.got,
* ld-mips-elf/tlsdyn-o32.d, ld-mips-elf/tlsdyn-o32.got,
* ld-mips-elf/tlslib-o32-hidden.got, ld-mips-elf/tlslib-o32-ver.got,
* ld-mips-elf/tlslib-o32.d, ld-mips-elf/tlslib-o32.got: Update for
GOT allocation changes.

* elfxx-mips.c (mips_elf_merge_obj_attributes): Prevent
unwanted fallthroughs in case statement.

From Craig Silverstein: Report output file name with ODR violation
warning message.

If generating a .err file fails, remove it.

From Craig Silverstein: Clean up DWARF line reader code.

Add heuristics for undefined symbol warnings.

Comment out undef_symbol.err for now.

* ld-elf/flags1.d: Generalize regexp for section size.

Default to --allow-shlib-undefined for now.

Revert last patch.

Support special always-defined symbols for targets.

Warn about undefined references in shared libraries if we have seen
all the DT_NEEDED entries for that library.

From Craig Silverstein: Rework debug info code a bit, add option for
ODR violations, add test case.

*** empty log message ***

daily update

2007-11-13  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/5307
* peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Don't
copy input subsystem if output is different from input.

From Craig Silverstein: First cut at detecting ODR violations.

* tui/tui-data.c (tui_prev_win): Guard against NULL.

merge from gcc

2007-11-13  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/5233
* ld-elf/flags1.d: New.
* ld-elf/flags1.ld: Likewise.
* ld-elf/flags1.s: Likewise.

* config/tc-mn10300.c (mn10300_force_relocation): Force a reloc to be generated for alignment fixups.
* config/tc-mn10300.h (TC_FORCE_RELOCATION): Call mn10300_force_relocation.
* elf-m10300.c (mn10300_elf_final_link_relocate): Prevent the accidental termination of DWARF location list entries.
  (mn10300_elf_relax_delete_bytes): Stop deletion if an align reloc is encountered that is larger than or not a mutliple of the number of bytes being deleted.
  When adjusting symbols, any symbols inside the region being deleted must be moved to the end of the region.
  Move align relocs forward if there is room for them after the deletion of the region.

PR 5233
* elf.c (rewrite_elf_program_header): Formatting.  Add
first_matching_lma and first_suggested_lma booleans and use
instead of testing matching_lma and suggested_lma for zero.

From Craig Silverstein: Support debug info for shared libraries.

merge from gcc

* floatformat.c (floatformat_ibm_long_double_is_valid): Fix
compiler warnings.
(floatformat_ibm_long_double): Use
floatformat_ibm_long_double_is_valid.

*** empty log message ***

daily update

* gas/macros/purge.s: Delete irpc loops.

2007-11-12  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/5299
* peicode.h (pe_bfd_object_p): Save and restore previous bfd
state when calling coff_object_p.

From Craig Silverstein: Dwarf_line_info can work with Object rather
than Sized_relobj.

From Craig Silverstein: Track_relocs doesn't need to hold onto the
object.

From Craig Silverstein: rework DWARF reader code a bit.

Correct handling of GOT references in a regular object.

PR gas/5269
* config/tc-frv.c (md_show_usage): Rewrite usage description to make it easier to translate.
* gas/po/gas.pot: Regenerate.

2007-11-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (gdbarch_alloc): Replace current_gdbarch by gdbarch. Remove
obsolete comment.
(verify_gdbarch, gdbarch_dump): Likewise.
(do_read): Update comment.
(addr_bit, bfd_arch_info, target_desc, long_long_bit, floatformat)
(ptr_bit, name_of_malloc): Replace current_gdbarch by gdbarch.
* gdbarch.{c,h}: Regenerate.

2007-11-12  Markus Deuling  <deuling@de.ibm.com>

* xtensa-tdep.c (ARG_1ST): Replace ARGS_FIRST_REG by its expression.
(ARGS_FIRST_REG): Remove.
(areg_numer): New function.
(xtensa_pseudo_register_read, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value)
(xtensa_frame_cache): Replace AREG_NUMBER by areg_number.
(AREG_NUMBER): Remove.
(XTENSA_IS_ENTRY, ARG_NOF, ARG_1ST): Add gdbarch as parameter.
(xtensa_frame_cache): Update use of XTENSA_IS_ENTRY.
(xtensa_push_dummy_call): Update use of ARG_NOF.
(extract_call_winsize): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
(xtensa_extract_return_value, xtensa_store_return_value): Update call
of extract_call_winsize.

    * NEWS: Add entry for new set/show print frame-args command.

Fix date in the last entry.

    * gdb.texinfo (Print Settings): Add documentation for "set/show
        print frame-arguments".