binutils-gdb.git
8 years agoExtend JIT-reader test and fix GDB problems that exposes
Pedro Alves [Fri, 1 Jul 2016 10:56:39 +0000 (11:56 +0100)]
Extend JIT-reader test and fix GDB problems that exposes

The jit-reader.exp test isn't really exercising the jit-reader's
unwinder API at all.  This commit address that, and then fixes GDB
problems exposed.

- The custom JIT reader provided for the jit-reader.exp testcase
  always rejects the jitted function's frame...

  This is because the custom JIT reader in the testcase never ever
  sets state->code_begin/end, so the bounds check in
  gdb.base/jitreader.c:unwind_frame:

   if (this_ip >= state->code_end || this_ip < state->code_begin)
     return GDB_FAIL;

  tends to fail, unless you're "lucky" (because it references
  uninitialized data).

  The result is that GDB is always actually using a built-in unwinder
  for the jitted function.

- The provided unwinder doesn't do anything that GDB's built-in
  unwinder can't do.

  IOW, we can't really tell whether the JIT reader's unwinder is
  working or not.

  I fixed that by making the jitted function mangle its own stack
  pointer with a xor, and then teaching the jit unwinder to demangle
  it back (another xor).  So now "backtrace" with GDB's built-in
  unwinder fails while with the jit unwinder, it succeeds.

- GDB crashes after unloading the JIT reader, and flushing frames...

  I made the testcase use the "flushregs" command after unloading the
  JIT reader, to force the JIT frames to be flushed.  However, that
  crashes GDB...

  When reinit_frame_cache tears down a frame's cache, it calls its
  unwinder's dealloc_cache method, which for JIT frames ends up in
  jit.c:jit_dealloc_cache.  This function calls each of the frame's
  gdb_reg_value's "free" pointer:

   for (i = 0; i < gdbarch_num_regs (frame_arch); i++)
     if (priv_data->registers[i] && priv_data->registers[i]->free)
       priv_data->registers[i]->free (priv_data->registers[i]);

  and the problem is these gdb_reg_value instances have been returned
  by the JIT reader that has been already unloaded, and their "free"
  function pointers likely point to functions in the DSO that has
  already been unloaded...

  A fix for that could be to call reinit_frame_cache in
  jit_reader_unload_command _before_ unloading the jit reader DSO so
  that the jit reader is given a chance to clean up the gdb_reg_values
  before it is unloaded.  However, the fix for the point below makes
  this unnecessary, because it stops jit.c from keeping around
  gdb_reg_values in the first place.

- However, it still makes sense to clear the frame cache when loading
  or unloading a JIT unwinder.

  This makes testing a JIT unwinder a bit simpler.

- Not only the frame cache actually -- gdb is not unloading the
  jit-registered objfiles when the JIT reader is unloaded, and not
  loading the already-registered descriptors when a JIT reader is
  loaded.

  The new test exercises unloading the jit reader, loading it back
  again, and then making sure the JIT reader's unwinder works again.
  Without the unload/re-load of already-read descriptors, the newly
  loaded JIT would have no idea where the new function is, because
  it's stored at symbol read time.

- I added a couple "info frame" calls to the test, and that
  crashes GDB...

  The problem is that jit_frame_prev_register assumes it'll only be
  called for raw registers, so when it gets a pseudo register number,
  the "priv->registers[reg]" access is really an out-of-bounds access.

  To fix that, I made jit_frame_prev_register use
  gdbarch_pseudo_register_read_value for reading the pseudo-registers.
  However, that works with a regcache and we don't have one.  To fix
  that, I made the JIT unwinder store a regcache in its cache instead
  of an array of gdb_reg_value pointers.

gdb/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>
    Tom Tromey  <tom@tromey.com>

* jit.c (jit_reader_load_command): Call reinit_frame_cache and
jit_inferior_created_hook.
(jit_reader_unload_command): Call reinit_frame_cache and
jit_inferior_exit_hook.
* jit.c (struct jit_unwind_private) <registers>: Delete field.
<regcache>: New field.
(jit_unwind_reg_set_impl): Set the register's value in the
regcache.  Free the passed-in gdb_reg_value.
(jit_dealloc_cache): Adjust to free the regcache.
(jit_frame_sniffer): Allocate a regcache instead of an array of
gdb_reg_value pointers.
(jit_frame_this_id): Adjust.
(jit_frame_prev_register): Read raw registers off of the regcache
instead of from the gdb_reg_value pointer array.  Use
gdbarch_pseudo_register_read_value to read pseudo registers.
* regcache.c (regcache_raw_set_cached_value): New function,
factored out from ...
(regcache_raw_write): ... here.
* regcache.h (regcache_raw_set_cached_value): Declare.

gdb/testsuite/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>

* gdb.base/jit-reader.exp (info_registers_current_frame): New
procedure.
(jit_reader_test): Test the jit reader's unwinder.
* gdb.base/jithost.c (jit_function_00_code): New global.
(main): Use memcpy to fill in the mmapped code, instead of poking
bytes manually here.
* gdb.base/jitreader.c (enum register_mapping) <AMD64_RBP>: New
value.
(read_debug_info): Save the function's range.
(read_sp): New function.
(unwind_frame): Use it.  Also unwind RBP.
(get_frame_id): Use read_sp.
(gdb_init_reader): Use calloc instead of malloc.
* lib/gdb.exp (get_hexadecimal_valueof): Add optional 'test'
parameter.  Use gdb_test_multiple.

8 years agoFix failure to detach if process exits while detaching on Linux
Pedro Alves [Fri, 1 Jul 2016 10:16:33 +0000 (11:16 +0100)]
Fix failure to detach if process exits while detaching on Linux

This commit fixes detaching on Linux when some thread exits the whole
thread group (process) just while we're detaching.

On Linux, a ptracer must detach from each LWP individually, with
PTRACE_DETACH.  Since PTRACE_DETACH sets the thread running free, if
one of the already-detached threads causes the whole thread group to
exit (e.g., simply calls exit), the kernel force-kills the other
threads in the group, making them zombie, just as we're still
detaching them.  Since PTRACE_DETACH against a zombie thread fails
with ESRCH, and gdb/gdbserver are not expecting this, the detach fails
with an error like: "Can't detach process: No such process.".

This patch detects this detach failure as normal, and instead of
erroring out, reaps the now-dead thread.

New test included, that exercises several different scenarios that
cause GDB/GDBserver to error out when it should not.

Tested on x86-64 GNU/Linux with {unix, native-gdbserver,
native-extended-gdbserver}

Note: without the previous fix, the "single-process + continue"
variant of the new test would fail with:

 (gdb) PASS: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: switch to parent
 continue
 Continuing.
 Warning:
 Could not insert hardware watchpoint 3.
 Could not insert hardware breakpoints:
 You may have requested too many hardware breakpoints/watchpoints.

 Command aborted.
 (gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue

gdb/gdbserver/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>
    Antoine Tremblay  <antoine.tremblay@ericsson.com>

* linux-low.c: Change interface to take the target lwp_info
pointer directly and return void.  Handle detaching from a zombie
thread.
(linux_detach_lwp_callback): New function.
(linux_detach): Detach from the leader thread after detaching from
the clone threads.

gdb/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>
    Antoine Tremblay  <antoine.tremblay@ericsson.com>

* inf-ptrace.c (inf_ptrace_detach_success): New function, factored
out from ...
(inf_ptrace_detach): ... here.
* inf-ptrace.h (inf_ptrace_detach_success): New declaration.
* linux-nat.c (get_pending_status): Rename to ...
(get_detach_signal): ... this, and return a host signal instead of
filling in a wait status.
(detach_one_lwp): New function, factored out from detach_callback
and adjusted to handle detaching from a zombie thread.
(detach_callback): Skip the leader thread.
(linux_nat_detach): No longer defer to inf_ptrace_detach to detach
the leader thread, nor build a signal string to pass down.
Instead, use target_announce_detach, detach_one_lwp and
inf_ptrace_detach_success.

gdb/testsuite/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>
    Antoine Tremblay  <antoine.tremblay@ericsson.com>

* gdb.threads/process-dies-while-detaching.c: New file.
* gdb.threads/process-dies-while-detaching.exp: New file.

8 years agoForget watchpoint locations when inferior exits or is killed/detached
Pedro Alves [Fri, 1 Jul 2016 10:16:32 +0000 (11:16 +0100)]
Forget watchpoint locations when inferior exits or is killed/detached

If you have two inferiors (or more), set watchpoints in one of the
inferiors, and then that inferior exits, until you manually delete the
watchpoint (or something forces a breakpoint re-set), you can't resume
the other inferior.

This is exercised by the test added by this commit.  Without the GDB
fix, this test fails like this:

 FAIL: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue to marker in inferior 1
 FAIL: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue to marker in inferior 1
 FAIL: gdb.multi/watchpoint-multi-exit.exp: dispose=exit: continue to marker in inferior 1

and gdb.log shows (in all three cases):

 (gdb) continue
 Continuing.
 Warning:
 Could not insert hardware watchpoint 2.
 Could not insert hardware breakpoints:
 You may have requested too many hardware breakpoints/watchpoints.

 Command aborted.
 (gdb) FAIL: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue to marker in inferior 1

The problem is that GDB doesn't forget about the locations of
watchpoints set in the inferior that is now dead.  When we try to
continue the inferior that is still alive, we reach
insert_breakpoint_locations, which has the the loop that triggers the
error:

  /* If we failed to insert all locations of a watchpoint, remove
     them, as half-inserted watchpoint is of limited use.  */

That loop finds locations that are not marked inserted, but which
according to should_be_inserted should have been inserted, and so
errors out.

gdb/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>

* breakpoint.c (breakpoint_init_inferior): Discard watchpoint
locations.
* infcmd.c (detach_command): Call breakpoint_init_inferior.

gdb/testsuite/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>

* gdb.multi/watchpoint-multi-exit.c: New file.
* gdb.multi/watchpoint-multi-exit.exp: New file.

8 years agoFactor out "Detaching from program" message printing
Pedro Alves [Fri, 1 Jul 2016 10:16:32 +0000 (11:16 +0100)]
Factor out "Detaching from program" message printing

Several targets have a copy of the same code that prints

 "Detaching from program ..."

in their target_detach implementation.  Factor that out to a common
function.

(For now, I left the couple targets that print this a bit differently
alone.  Maybe this could be further pulled out into infcmd.c.  If we
did that, and those targets want to continue printing differently,
this new function could be converted to a target method.)

gdb/ChangeLog:
2016-07-01  Pedro Alves  <palves@redhat.com>

* darwin-nat.c (darwin_detach): Use target_announce_detach.
* inf-ptrace.c (inf_ptrace_detach): Likewise.
* nto-procfs.c (procfs_detach): Likewise.
* remote.c (remote_detach_1): Likewise.
* target.c (target_announce_detach): New function.
* target.h (target_announce_detach): New declaration.

8 years agoFix formatting of some previous gdb/testsuite/ChangeLog entries
Pedro Alves [Fri, 1 Jul 2016 10:24:21 +0000 (11:24 +0100)]
Fix formatting of some previous gdb/testsuite/ChangeLog entries

8 years agoFix formatting of some previous gdb/ChangeLog entries
Pedro Alves [Fri, 1 Jul 2016 10:17:58 +0000 (11:17 +0100)]
Fix formatting of some previous gdb/ChangeLog entries

8 years agoExpect the objcopy without global symbols test to fail for ARM and AArch64 targets.
Nick Clifton [Fri, 1 Jul 2016 09:32:45 +0000 (10:32 +0100)]
Expect the objcopy without global symbols test to fail for ARM and AArch64 targets.

* testsuite/binutils-all/objcopy.exp
(objcopy_test_without_global_symbol): Expect this test to fail on
the AArch64 and ARM targets, since they preserve their mapping
symbols.

8 years agox86-64/MPX: relax no-RIP-relative-addressing testcase
Jan Beulich [Fri, 1 Jul 2016 09:17:30 +0000 (11:17 +0200)]
x86-64/MPX: relax no-RIP-relative-addressing testcase

... for COFF targets.

8 years agoAdd marker for 2.27 branch.
Tristan Gingold [Fri, 1 Jul 2016 08:57:46 +0000 (10:57 +0200)]
Add marker for 2.27 branch.

binutils/
2016-07-01  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.27.

gas/
2016-07-01  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.27.

ld/
2016-07-01  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.27.

8 years agoFix mis-placement in binutils.texi
Tristan Gingold [Wed, 29 Jun 2016 10:09:06 +0000 (12:09 +0200)]
Fix mis-placement in binutils.texi

binutils/
* doc/binutils.texi (objdump): Fix mis-placement.

8 years agox86-64/MPX: bndmk, bndldx, and bndstx don't allow RIP-relative addressing
Jan Beulich [Fri, 1 Jul 2016 07:07:15 +0000 (09:07 +0200)]
x86-64/MPX: bndmk, bndldx, and bndstx don't allow RIP-relative addressing

Additionally warn about scaling factors other than 1 for the latter
two, as those get ignored by the hardware.

8 years agox86/MPX: fix address size handling
Jan Beulich [Fri, 1 Jul 2016 07:06:16 +0000 (09:06 +0200)]
x86/MPX: fix address size handling

While address overrides are ignored in 64-bit mode (and hence shouldn't
really result in an error, but upon v1 converting this to a warning I
was told otherwise), trying to use 16-bit addressing is documented to
result in #UD, and hence the assembler should reject the attempt. (The
added test case at once also checks that bndc{l,n,u} won't accept
16-bit register operands.)

8 years agox86/Intel: don't accept bogus instructions
Jan Beulich [Fri, 1 Jul 2016 07:03:02 +0000 (09:03 +0200)]
x86/Intel: don't accept bogus instructions

... due to their last byte looking like a suffix, when after its
stripping a matching instruction can be found. Since memory operand
size specifiers in Intel mode get converted into suffix representation
internally, we need to keep track of the actual mnemonic suffix which
may have got trimmed off, and check its validity while looking for a
matching template. I tripper over this quite some time again after
support for AMD's SSE5 instructions got removed, as at that point some
of the SSE5 mnemonics, other than expected, didn't fail to assemble.
But the problem affects many more instructions, namely (almost) all
MMX, SSE, and AVX ones as it looks. I don't think it makes sense to
add a testcase covering all of them, nor do I think it makes sense to
pick out some random examples for a new test case.

8 years agox86: allow suffix-less movzw and 64-bit movzb
Jan Beulich [Fri, 1 Jul 2016 07:01:41 +0000 (09:01 +0200)]
x86: allow suffix-less movzw and 64-bit movzb

... just like is already the case for 16- and 32-bit movzb: I can't see
why omitting suffixes on this (and movs{b,w,l}) is not allowed, when it
is allowed for all other instructions where the suffix is redundant
with (one of) the operands.

8 years agox86: remove stray instruction attributes
Jan Beulich [Fri, 1 Jul 2016 06:57:21 +0000 (08:57 +0200)]
x86: remove stray instruction attributes

- with Cpu64 Disp16 makes no sense for memory operands
- with CpuNo64 Disp32S makes no sense
- non-64-bit lgdt doesn't allow 10-byte operands

8 years agox86/Intel: fix operand checking for MOVSD
Jan Beulich [Fri, 1 Jul 2016 06:56:13 +0000 (08:56 +0200)]
x86/Intel: fix operand checking for MOVSD

The dual purpose mnemonic (string move vs scalar double move) breaks
the assumption that the isstring flag would be set on both the first
and last entry in the current set of templates, which results in bogus
or missing diagnostics for the string move variant of the mnemonic.
Short of mostly rewriting i386_index_check() and its interaction with
the rest of the code, simply shrink the template set to just string
instructions when encountering the second memory operand, and run
i386_index_check() a second time for the first memory operand after
that reduction.

8 years agoAutomatic date update in version.in
GDB Administrator [Fri, 1 Jul 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoMIPS/GAS: Fix a comment typo in `get_append_method'
Maciej W. Rozycki [Thu, 30 Jun 2016 20:49:54 +0000 (21:49 +0100)]
MIPS/GAS: Fix a comment typo in `get_append_method'

gas/
* config/tc-mips.c (get_append_method): Fix a comment typo.

8 years agoChangeLog entry for the --with-cpu patch for ARC configuration.
Andrew Burgess [Thu, 30 Jun 2016 15:53:20 +0000 (16:53 +0100)]
ChangeLog entry for the --with-cpu patch for ARC configuration.

8 years agoFix typo in comment
Yao Qi [Thu, 30 Jun 2016 15:03:07 +0000 (16:03 +0100)]
Fix typo in comment

This patch fixes the typo "uf" in the comment.  I'll push it in as the
change is obvious.

2016-06-30  Yao Qi  <yao.qi@linaro.org>

* arm-dis.c (print_insn): Fix typo in comment.

8 years agoMIPS16/GAS: Fix delay slot filling across frags
Matthew Fortune [Thu, 30 Jun 2016 14:02:20 +0000 (15:02 +0100)]
MIPS16/GAS: Fix delay slot filling across frags

Fix an assertion failure like:

test.s: Assembler messages:
test.s:3: Internal error!
Assertion failure in append_insn at .../gas/config/tc-mips.c:7523.
Please report this bug.

triggered by assembling MIPS16 code like:

hello:
addiu $4, $4, 4
jr $31

with the generation of a listing file enabled, e.g.:

$ as -mips16 -O2 -aln=test.lst

The cause of the problem is the lack of support for moving instructions
across frags in MIPS16 jump swapping, which triggers more easily with
listing enabled as in that case every instruction gets placed in its own
frag.  It would trigger even with listing disabled though if the
instruction to swap a MIPS16 jump with was unfortunately enough placed
as last in a frag that became full.

This scenario is already handled correctly with branch swapping in
regular MIPS and microMIPS code, so reuse it for MIPS16 code as well,
and now that all MIPS16 handling has become the same as the regular MIPS
and microMIPS cases remove MIPS16 special casing altogether.

This effectively complements:

commit 464ab0e55ade01d2bb0b4fa45c429af7a2f85a26
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Mon Aug 6 20:33:00 2012 +0000

<https://sourceware.org/ml/binutils/2012-08/msg00043.html>, ("MIPS/GAS:
Correct microMIPS branch swapping assertion") for the MIPS16 case.

The assertion itself was introduced with:

commit 1e91584932efd70020c8c98037d0cb93a0552a20
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date:   Wed Mar 9 09:17:02 2005 +0000

<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]"), but its introduction
merely noted our existing lack of support for MIPS16 jump swapping
across frags.

gas/
* config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special
case MIPS16 handling.
* testsuite/gas/mips/branch-swap-3.d: New test.
* testsuite/gas/mips/branch-swap-4.d: New test.
* testsuite/gas/mips/mips16@branch-swap-3.d: New test.
* testsuite/gas/mips/mips16@branch-swap-4.d: New test.
* testsuite/gas/mips/micromips@branch-swap-3.d: New test.
* testsuite/gas/mips/micromips@branch-swap-4.d: New test.
* testsuite/gas/mips/branch-swap-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

8 years agoMIPS/GAS: Simplify non-MIPS16 branch swapping sequence
Maciej W. Rozycki [Thu, 30 Jun 2016 11:46:47 +0000 (12:46 +0100)]
MIPS/GAS: Simplify non-MIPS16 branch swapping sequence

Simplify non-MIPS16 branch swapping by copying the MIPS16 variant, which
sets the new position for the current instruction first and reduces the
calculation of the new position of the previous instruction.  Also refer
to previous instruction's frag and position via `delay' for consistency.

Reintroduce an explanatory comment, updated, previously removed with:

commit 1e91584932efd70020c8c98037d0cb93a0552a20
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date:   Wed Mar 9 09:17:02 2005 +0000

<https://sourceware.org/ml/binutils/2005-03/msg00217.html>, ("Rework
MIPS nop-insertion code, add -mfix-vr4130 [5/11]").

gas/
* config/tc-mips.c (append_insn): Simplify non-MIPS16 branch
swapping sequence.

8 years agoPR gas/20312: Do not pad sections to alignment on failed assembly
Maciej W. Rozycki [Wed, 29 Jun 2016 00:38:50 +0000 (01:38 +0100)]
PR gas/20312: Do not pad sections to alignment on failed assembly

Correct a regression from commit 85024cd8bcb9 ("Run write_object_file
after errors") causing unsuccessful assembly, which may be due to any
reason, such as supplying a valid source like this:

.text
.byte 0
.err

to terminate with an assertion failure like:

test.s: Assembler messages:
test.s:3: Error: .err encountered
../as-new: BFD (GNU Binutils) 2.24.51.20140628 internal error, aborting at .../gas/write.c line 608 in size_seg
../as-new: Please report this bug.

on targets whose default text section alignment is above 0, typically
RISC machines.

This is due to an attempt to set last text section's frag alignment to
0, requested from `subsegs_finish_section' where `frag_align_code
(alignment, 0)' is called with `alignment' set to 0 rather than the
section alignment if `had_errors' has returned true.  The call to
`subsegs_finish_section' is made from `subsegs_finish' from
`write_object_file' at unsuccessful completion, which previously wasn't
made.

Always set last section's frag alignment from the section alignment
then, forcing no section padding instead if completing unsuccessfully,
so that in that case alignment padding is still suppressed from any
listing generated, fixing assertion failures for these targets:

alpha-linuxecoff  -FAIL: all pr20312
arm-aout  -FAIL: all pr20312
mips-freebsd  -FAIL: all pr20312
mips-img-linux  -FAIL: all pr20312
mips-linux  -FAIL: all pr20312
mips-mti-linux  -FAIL: all pr20312
mips-netbsd  -FAIL: all pr20312
mips-sgi-irix5  -FAIL: all pr20312
mips-sgi-irix6  -FAIL: all pr20312
mips-vxworks  -FAIL: all pr20312
mips64-freebsd  -FAIL: all pr20312
mips64-img-linux  -FAIL: all pr20312
mips64-linux  -FAIL: all pr20312
mips64-mti-linux  -FAIL: all pr20312
mips64-openbsd  -FAIL: all pr20312
mips64el-freebsd  -FAIL: all pr20312
mips64el-img-linux  -FAIL: all pr20312
mips64el-linux  -FAIL: all pr20312
mips64el-mti-linux  -FAIL: all pr20312
mips64el-openbsd  -FAIL: all pr20312
mipsel-freebsd  -FAIL: all pr20312
mipsel-img-linux  -FAIL: all pr20312
mipsel-linux  -FAIL: all pr20312
mipsel-mti-linux  -FAIL: all pr20312
mipsel-netbsd  -FAIL: all pr20312
mipsel-vxworks  -FAIL: all pr20312
mipsisa32-linux  -FAIL: all pr20312
mipsisa32el-linux  -FAIL: all pr20312
mipsisa64-linux  -FAIL: all pr20312
mipsisa64el-linux  -FAIL: all pr20312
sh-pe  -FAIL: all pr20312
sparc-aout  -FAIL: all pr20312

gas/
PR gas/20312
* write.c (subsegs_finish_section): Force no section padding to
alignment on failed assembly, always set last frag's alignment
from section.
* testsuite/gas/all/pr20312.l: New list test.
* testsuite/gas/all/pr20312.s: New test source.
* testsuite/gas/all/gas.exp: Run the new test

8 years agoFix gdbserver/MI testing regression
Pedro Alves [Thu, 30 Jun 2016 10:55:22 +0000 (11:55 +0100)]
Fix gdbserver/MI testing regression

Commit 51f77c3704a6 ("Add testing infrastruture bits for running with
MI on a separate UI") broke MI testing with native-gdbserver:

 $ make check RUNTESTFLAGS="--target_board=native-gdbserver mi-var-child.exp"
 ...
 Running .../src/binutils-gdb/gdb/testsuite/gdb.mi/mi-var-child.exp ...
 can't unset "inferior_spawn_id": no such variable
     while executing
 "unset inferior_spawn_id"
     (procedure "close_gdbserver" line 20)
     invoked from within
 "close_gdbserver"
 ...

When testing with gdbserver, gdb_exit is overridden with a special
version that calls close_gdbserver, which clears inferior_spawn_id.
The problem is that the commit mentioned above made
gdb_exit/mi_gdb_exit clear inferior_spawn_id too, and clearing a
non-existing variable is a tcl error.

Since gdb_exit/mi_gdb_exit always clears inferior_spawn_id now, the
fix is simply to stop clearing it in close_gdbserver.

gdb/testsuite/
2016-06-30  Pedro Alves  <palves@redhat.com>

* lib/gdbserver-support.exp (close_gdbserver, gdb_exit): Don't
unset inferior_spawn_id.

8 years agoMake testing gdb with FORCE_SEPARATE_MI_TTY=1 actually work
Pedro Alves [Thu, 30 Jun 2016 10:55:21 +0000 (11:55 +0100)]
Make testing gdb with FORCE_SEPARATE_MI_TTY=1 actually work

Runing the whole gdb testsuite with MI on a separate tty, with:

  make check RUNTESTFLAGS="FORCE_SEPARATE_MI_TTY=1"

Doesn't actually work because commit 51f77c3704a6 ("Add testing
infrastruture bits for running with MI on a separate UI") included a
last-minute rename typo, now fixed with this commit.

gdb/testsuite/ChangeLog:
2016-06-30  Pedro Alves  <palves@redhat.com>

* lib/mi-support.exp (default_mi_gdb_start): Declare global
FORCE_SEPARATE_MI_TTY, not SEPARATE_MI_TTY.

8 years agoAllow ARC target to be configured with --with-cpu=<cpu-name>.
Andrew Burgess [Thu, 30 Jun 2016 10:14:41 +0000 (11:14 +0100)]
Allow ARC target to be configured with --with-cpu=<cpu-name>.

gas * config.in (TARGET_WITH_CPU): Undefine.
* configure.ac: Add --with-cpu support, and define in config.h.
* configure: Regenerate.
* config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU.
* NEWS: Mention new configure option.

8 years ago[ARM][GAS] ARMv8.2 should enable ARMv8.1 NEON instructions.
Matthew Wahab [Thu, 30 Jun 2016 09:46:51 +0000 (10:46 +0100)]
[ARM][GAS] ARMv8.2 should enable ARMv8.1 NEON instructions.

GAS fails to recognize march=armv8.2-a as a superset of march=armv8.1-a
when assembling NEON instructions. The patch corrects this, making
-march=armv8.2-a -mfpu=neon-fp-armv8 enable the NEON intructions
introduced with ARMv8.1-A.

include/
2016-06-30  Matthew Wahab  <matthew.wahab@arm.com>

* opcode/arm.h (ARM_ARCH_V8_2a): Add FPU_NEON_EXT_RDMA to the set
of enabled FPU features.

gas/
2016-06-30  Matthew Wahab  <matthew.wahab@arm.com>

* testsuite/gas/arm/armv8_2+rdma.d: New.

8 years agoAdd support for simulating big-endian AArch64 binaries.
Jim Wilson [Thu, 30 Jun 2016 08:10:41 +0000 (09:10 +0100)]
Add support for simulating big-endian AArch64 binaries.

* cpustate.h: Include config.h.
(union GRegisterValue): Add WORDS_BIGENDIAN check.  For big endian code
use anonymous structs to align members.
* simulator.c (aarch64_step): Use sim_core_read_buffer and
endian_le2h_4 to read instruction from pc.

8 years agoFix gold testsuite failure with GCC 6.
Cary Coutant [Thu, 30 Jun 2016 06:24:35 +0000 (23:24 -0700)]
Fix gold testsuite failure with GCC 6.

With GCC 6 when not using -static-libstdc++, the operator delete(void*)
function is defined in the shared C++ support library, rather than in
the main program. The test script is too aggressive in checking for
this symbol's presence among the exported symbols. This patch removes
the check for that symbol.

gold/
PR gold/20310
* testsuite/dynamic_list.sh: Remove check for _ZdlPv.

8 years agoUpdate "make clean" in gold/testsuite.
Cary Coutant [Thu, 30 Jun 2016 06:16:24 +0000 (23:16 -0700)]
Update "make clean" in gold/testsuite.

gold/
* testsuite/Makefile.am (MOSTLYCLEANFILES): Add eh_test_2.
* testsuite/Makefile.in: Regenerate.

8 years ago[GOLD] Pass -Wl,-z to gcc, not plain -z
Alan Modra [Wed, 29 Jun 2016 09:07:27 +0000 (18:37 +0930)]
[GOLD] Pass -Wl,-z to gcc, not plain -z

* testsuite/Makefile.am (memory_test, memory_test_2): Pass
-Wl,-z to gcc, not plain -z.
* testsuite/Makefile.in: Regenerate.

8 years agoAutomatic date update in version.in
GDB Administrator [Thu, 30 Jun 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoAdd copyright header in gdb.base/return.c
Yao Qi [Wed, 29 Jun 2016 16:33:19 +0000 (17:33 +0100)]
Add copyright header in gdb.base/return.c

gdb/testsuite:

2016-06-29  Yao Qi  <yao.qi@linaro.org>

* gdb.base/return.c: Add copyright header.

8 years agoDefault to --enable-compressed-debug-sections=gas for Linux/x86
H.J. Lu [Wed, 29 Jun 2016 16:29:39 +0000 (09:29 -0700)]
Default to --enable-compressed-debug-sections=gas for Linux/x86

--enable-compressed-debug-sections=gas added to binutils 2.26.  Make it
default for Linux/x86 targets in 2.27.

* NEWS: Mention --enable-compressed-debug-sections=gas is the
default for Linux/x86 targets.
* configure.tgt (ac_default_compressed_debug_sections): Default
to yes for Linux/x86 targets.

8 years agoFix PR python/20129 - use of non-existing variable
Tom Tromey [Mon, 6 Jun 2016 17:21:15 +0000 (11:21 -0600)]
Fix PR python/20129 - use of non-existing variable

PR python/20129 concerns the error message one gets from a command
like "disable frame-filter global NoSuchFilter".  Currently this
throws a second, unexpected, exception due to the use of a
non-existing variable named "name".

This patch adds regression tests and fixes a couple of spots to use
the correct variable name.

Built and regtested on x86-64 Fedora 23.

2016-06-29  Tom Tromey  <tom@tromey.com>

PR python/20129:
* python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
(SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
not "name".

2016-06-29  Tom Tromey  <tom@tromey.com>

PR python/20129:
* gdb.python/py-framefilter.exp: Add tests for setting priority
and disabling of non-existent frame filter.

8 years agoPR gdb/17210 - fix possible memory leak in read_memory_robust
Tom Tromey [Thu, 9 Jun 2016 15:46:53 +0000 (09:46 -0600)]
PR gdb/17210 - fix possible memory leak in read_memory_robust

PR gdb/17210 concerns a possible memory leak in read_memory_robust.
The bug can happen because read_memory_robust allocates memory, does
not install any cleanups, and invokes QUIT.  Similarly, target_read
calls QUIT, so it too can potentially throw.

The fix is to install cleanups to guard the allocated memory.

Built and regtested on x86-64 Fedora 23.  I couldn't think of a way to
test this, so no new test; and of course this means it should have
more careful review.

2016-06-29  Tom Tromey  <tom@tromey.com>

PR gdb/17210:
* target.c (free_memory_read_result_vector): Take a pointer to the
VEC as an argument.
(read_memory_robust): Install a cleanup for "result".
* mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.

8 years agogold: Support 386 TLS code sequences without PLT
H.J. Lu [Wed, 29 Jun 2016 15:38:43 +0000 (08:38 -0700)]
gold: Support 386 TLS code sequences without PLT

There are extensions to 386 psABI:

https://groups.google.com/forum/#!topic/ia32-abi/awsRSvJOJfs

to call tls_get_addr via GOT:

call *___tls_get_addr@GOT(%reg)

where EBX register isn't required as GOT base.

Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.

For general dynamic model, 7-byte lea instruction before call
instruction is replaced by 6-byte one to make room for indirect call.
For local dynamic model, we simply use 5-byte indirect call.

TLS linker optimization is updated to recognize new instruction
patterns.  For local dynamic model to local exec model transition,
we generate a 6-byte lea instruction as nop, instead of a 1-byte nop
plus a 4-byte lea instruction.

PR gold/20308
* i386.cc (Target_i386::Relocate::relocate): Allow
R_386_GOT32X relocation against ___tls_get_addr.
(Target_i386::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_i386::Relocate::tls_gd_to_le): Likewise.
(Target_i386::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20308a_test,
pr20308b_test, pr20308c_test, pr20308d_test, pr20308e_test.
(pr20308a_test_SOURCES): New.
(pr20308a_test_DEPENDENCIES): Likewise.
(pr20308a_test_CFLAGS): Likewise.
(pr20308a_test_LDFLAGS): Likewise.
(pr20308a_test_LDADD): Likewise.
(pr20308b_test_SOURCES): Likewise.
(pr20308b_test_DEPENDENCIES): Likewise.
(pr20308b_test_CFLAGS): Likewise.
(pr20308b_test_LDFLAGS): Likewise.
(pr20308b_test_LDADD): Likewise.
(pr20308c_test_SOURCES): Likewise.
(pr20308c_test_DEPENDENCIES): Likewise.
(pr20308c_test_CFLAGS): Likewise.
(pr20308c_test_LDFLAGS): Likewise.
(pr20308c_test_LDADD): Likewise.
(pr20308d_test_SOURCES): Likewise.
(pr20308d_test_DEPENDENCIES): Likewise.
(pr20308d_test_CFLAGS): Likewise.
(pr20308d_test_LDFLAGS): Likewise.
(pr20308d_test_LDADD): Likewise.
(pr20308e_test_SOURCES): Likewise.
(pr20308e_test_DEPENDENCIES): Likewise.
(pr20308e_test_CFLAGS): Likewise.
(pr20308e_test_LDFLAGS): Likewise.
(pr20308e_test_LDADD): Likewise.
(pr20308a.so): Likewise.
(pr20308b.so): Likewise.
(pr20308_gd.o): Likewise.
(pr20308_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20308a.so pr20308b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20308_def.c: New file.
* testsuite/pr20308_gd.S: Likewise.
* testsuite/pr20308_ld.S: Likewise.
* testsuite/pr20308_main.c: Likewise.

8 years agogold: Support x86-64 TLS code sequences without PLT
H.J. Lu [Wed, 29 Jun 2016 15:37:30 +0000 (08:37 -0700)]
gold: Support x86-64 TLS code sequences without PLT

There are extensions to x86-64 psABI:

https://groups.google.com/forum/#!topic/x86-64-abi/de5_KnLHxtI

to call tls_get_addr via GOT:

call *__tls_get_addr@GOTPCREL(%rip)

Since direct call is 4-byte long and indirect call, is 5-byte long, the
extra one byte must be handled properly.

For general dynamic model, one 0x66 prefix before call instruction is
removed to make room for indirect call.  For local dynamic model, we
simply use 5-byte indirect call.

TLS linker optimization is updated to recognize new instruction
patterns.  For local dynamic model to local exec model transition, we
generate 4 0x66 prefixes, instead of 3, before mov instruction in 64-bit
and generate a 5-byte nop, instead of 4-byte, before mov instruction in
32-bit.

PR gold/20216
* configure.ac (DEFAULT_TARGET_X86_64_OR_X32): New
AM_CONDITIONAL.
* configure: Regenerated.
* x86_64.cc (Target_x86_64<size>::Relocate::relocate): Allow
R_X86_64_GOTPCRELX relocation against __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_ie): Support indirect
call to __tls_get_addr.
(Target_x86_64<size>::Relocate::tls_gd_to_le): Likewise.
(Target_x86_64<size>::Relocate::tls_ld_to_le): Likewise.
* testsuite/Makefile.am (check_PROGRAMS): Add pr20216a_test,
pr20216b_test, pr20216c_test, pr20216d_test, pr20216e_test.
(pr20216a_test_SOURCES): New.
(pr20216a_test_DEPENDENCIES): Likewise.
(pr20216a_test_CFLAGS): Likewise.
(pr20216a_test_LDFLAGS): Likewise.
(pr20216a_test_LDADD): Likewise.
(pr20216b_test_SOURCES): Likewise.
(pr20216b_test_DEPENDENCIES): Likewise.
(pr20216b_test_CFLAGS): Likewise.
(pr20216b_test_LDFLAGS): Likewise.
(pr20216b_test_LDADD): Likewise.
(pr20216c_test_SOURCES): Likewise.
(pr20216c_test_DEPENDENCIES): Likewise.
(pr20216c_test_CFLAGS): Likewise.
(pr20216c_test_LDFLAGS): Likewise.
(pr20216c_test_LDADD): Likewise.
(pr20216d_test_SOURCES): Likewise.
(pr20216d_test_DEPENDENCIES): Likewise.
(pr20216d_test_CFLAGS): Likewise.
(pr20216d_test_LDFLAGS): Likewise.
(pr20216d_test_LDADD): Likewise.
(pr20216e_test_SOURCES): Likewise.
(pr20216e_test_DEPENDENCIES): Likewise.
(pr20216e_test_CFLAGS): Likewise.
(pr20216e_test_LDFLAGS): Likewise.
(pr20216e_test_LDADD): Likewise.
(pr20216a.so): Likewise.
(pr20216b.so): Likewise.
(pr20216_gd.o): Likewise.
(pr20216_ld.o): Likewise.
(MOSTLYCLEANFILES): Add pr20216a.so pr20216b.so.
* testsuite/Makefile.in: Regenerated.
* testsuite/pr20216_def.c: New file.
* testsuite/pr20216_gd.S: Likewise.
* testsuite/pr20216_ld.S: Likewise.
* testsuite/pr20216_main.c: Likewise.

8 years agoInitialize strtok_r's saveptr to NULL
Manish Goregaokar [Wed, 29 Jun 2016 11:39:43 +0000 (17:09 +0530)]
Initialize strtok_r's saveptr to NULL

Building gdb with --enable-build-with-cxx=no trips on a warning:

 ../../binutils-gdb/gdb/rust-lang.c:173:15: error: saveptr may be used
 uninitialized in this function [-Werror=maybe-uninitialized]
     ret.name = concat (TYPE_NAME (type), "::", token, (char *) NULL);

The problem is that gcc doesn't understand that "tail" can never be
NULL in the call to strtok_r:

      name = xstrdup (TYPE_FIELD_NAME (type, 0));
      cleanup = make_cleanup (xfree, name);
      tail = name + strlen (RUST_ENUM_PREFIX);
...
      for (token = strtok_r (tail, "$", &saveptr);

Fix this by always initializing saveptr.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

gdb/ChangeLog:
    * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.

8 years agoSet unknown_syscall differently on arm linux
Yao Qi [Wed, 29 Jun 2016 13:51:41 +0000 (14:51 +0100)]
Set unknown_syscall differently on arm linux

Currently, we use 123456789 as unknown or illegal syscall number, and
expect program return ENOSYS.  Although 123456789 is an illegal syscall
number on arm linux, kernel sends SIGILL rather than returns -ENOSYS.
However, arm linux kernel returns -ENOSYS if syscall number is within
0xf0001..0xf07ff, so we can use 0xf07ff for unknown_syscall in test.

gdb/testsuite:

2016-06-29  Yao Qi  <yao.qi@linaro.org>

* gdb.base/catch-syscall.c [__arm__]: Set unknown_syscall to
0x0f07ff.

8 years agosparc: make SPARC_OPCODE_ARCH_MAX part of its enum
Trevor Saunders [Fri, 27 May 2016 08:52:45 +0000 (04:52 -0400)]
sparc: make SPARC_OPCODE_ARCH_MAX part of its enum

include/ChangeLog:

2016-06-29  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* opcode/sparc.h (enum sparc_opcode_arch_val): Move
SPARC_OPCODE_ARCH_MAX into the enum.

8 years agoUse strtok_r instead of strsep in rust_get_disr_info
Manish Goregaokar [Wed, 29 Jun 2016 10:12:28 +0000 (15:42 +0530)]
Use strtok_r instead of strsep in rust_get_disr_info

strsep doesn't exist on Windows.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

gdb/ChangeLog:
    * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.

8 years agoPreserve all mapping symbols in ARM and AArch64 object files.
Nick Clifton [Wed, 29 Jun 2016 10:17:40 +0000 (11:17 +0100)]
Preserve all mapping symbols in ARM and AArch64 object files.

bfd * elfnn-aarch64.c (is_aarch64_mapping_symbol): New function.
Returns TRUE for AArch64 mapping symbols.
(elfNN_aarch64_backend_symbol_processing): New function.  Marks
mapping symbols as precious in object files so that they will not
be stripped.
(elf_backend_symbol_processing): Define.

* elf32-arm.c (is_arm_mapping_symbol): New function.  Returns TRUE
for ARM mapping symbols.
(elf32_arm_backend_symbol_processing): Make use of the new function.

8 years agoCorrect fix for typo
Nick Clifton [Wed, 29 Jun 2016 08:09:03 +0000 (09:09 +0100)]
Correct fix for typo

8 years agoFix typo
Nick Clifton [Wed, 29 Jun 2016 08:06:55 +0000 (09:06 +0100)]
Fix typo

8 years agoGAS: Fix `abort' expansion in write.c
Maciej W. Rozycki [Tue, 28 Jun 2016 16:33:38 +0000 (17:33 +0100)]
GAS: Fix `abort' expansion in write.c

Remove an internal diagnostic regression introduced with the inclusion of
"libbfd.h" from write.c, added with:

commit e7ff5c732e7b95aafccd0910ea1a5cb8251a1033
Author: Alan Modra <amodra@gmail.com>
Date:   Fri Feb 16 03:40:17 2007 +0000

That change made "libbfd.h" override the `abort' definition provided by
"as.h" earlier on, making the message produced by any calls reached from
write.c, which is a part of the GAS proper, look like they came from
BFD, e.g.:

.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg

../as-new: Please report this bug.

vs:

.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
.../gas/testsuite/gas/elf/type.s: Internal error, aborting at .../gas/write.c:602 in size_seg
Please report this bug.

With the removal of "libbfd.h" restore the latter message format.

gas/
* write.c: Remove "libbfd.h" inclusion.

8 years agoAutomatic date update in version.in
GDB Administrator [Wed, 29 Jun 2016 00:00:26 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years ago[GOLD] Modify script_test_12
Alan Modra [Tue, 28 Jun 2016 22:30:58 +0000 (08:00 +0930)]
[GOLD] Modify script_test_12

Changes necessary to make this test pass on powerpc64.

* script_test_12.t: Delete .plt, specify 64k page size.
* script_test_12i.t: Likewise.

8 years ago[GOLD] alignment test
Alan Modra [Tue, 28 Jun 2016 22:30:15 +0000 (08:00 +0930)]
[GOLD] alignment test

PowerPC gcc aligns char arrays to a word which results in the test
failing since it expects a char alignment.  As the test already uses
gcc attributes to assign variables to sections, we may as well use an
attribute to align too.

* testsuite/plugin_layout_with_alignment.c: Explicitly align all
variables.

8 years ago[GOLD] Disable copy_test_protected on powerpc
Alan Modra [Tue, 28 Jun 2016 22:29:34 +0000 (07:59 +0930)]
[GOLD] Disable copy_test_protected on powerpc

A target like powerpc64 that is PIC by default doesn't need copy relocs.

* testsuite/Makefile.am (copy_test_protected): Disable for powerpc.
* testsuite/Makefile.in: Regenerate.

8 years agoFix execute permission on gold/testsuite/script_test_14.sh.
Cary Coutant [Tue, 28 Jun 2016 22:44:22 +0000 (15:44 -0700)]
Fix execute permission on gold/testsuite/script_test_14.sh.

8 years agoImplement the R_AARCH64_NONE relocation.
Igor Kudrin [Tue, 28 Jun 2016 22:43:43 +0000 (15:43 -0700)]
Implement the R_AARCH64_NONE relocation.

According to "ELF for the ARM(r) 64-bit Architecture (AArch64)",
this relocation can be used "to prevent removal of sections that
might otherwise appear to be unused."

gold/
* aarch64-reloc.def (NONE): New relocation.
* aarch64.cc (Target_aarch64::Scan::local): Handle R_AARCH64_NONE.
(Target_aarch64::Scan::global): Likewise.
* testsuite/Makefile.am (aarch64_reloc_none): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_reloc_none.s: New test source file.
* testsuite/aarch64_reloc_none.sh: New test script.

8 years agoConvert indirect calls to direct when possible.
Sriraman Tallam [Tue, 28 Jun 2016 22:42:33 +0000 (15:42 -0700)]
Convert indirect calls to direct when possible.

Please see patch discussion:
https://www.sourceware.org/ml/binutils/2016-05/msg00322.html

2016-06-28  Sriraman Tallam  <tmsriram@google.com>

* x86_64.cc (Lazy_view): New class.
(can_convert_mov_to_lea): Templatize function.  Make the function
check for appropriate relocation types and use the view parameter
to get section contents.
(can_convert_callq_to_direct): New function.
(Target_x86_64<size>::Scan::global): Refactor.
(Target_x86_64<size>::Relocate::relocate): Refactor. Change any indirect
call via GOT that can be converted.
* testsuite/Makefile.am (x86_64_indirect_call_to_direct.sh): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/x86_64_indirect_call_to_direct1.s: New file.
* testsuite/x86_64_indirect_jump_to_direct1.s: New file.

8 years agoImplement SORT_BY_INIT_PRIORITY.
Igor Kudrin [Tue, 28 Jun 2016 22:34:11 +0000 (15:34 -0700)]
Implement SORT_BY_INIT_PRIORITY.

2016-06-28  Igor Kudrin  <ikudrin@accesssoftek.com>

gold/
PR gold/18098
* script-c.h (Sort_wildcard): Add SORT_WILDCARD_BY_INIT_PRIORITY.
* script-sections.cc (Input_section_sorter::get_init_priority): New method.
(Input_section_sorter::operator()): Handle SORT_WILDCARD_BY_INIT_PRIORITY.
(Output_section_element_input::print): Likewise.
* script.cc (script_keyword_parsecodes): Add entry SORT_BY_INIT_PRIORITY.
* yyscript.y (SORT_BY_INIT_PRIORITY): New token.
(wildcard_section): Handle SORT_BY_INIT_PRIORITY.

* testsuite/Makefile.am (script_test_14): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_14.s: New test source file.
* testsuite/script_test_14.sh: New test script.
* testsuite/script_test_14.t: New test linker script.

8 years agoImplement SORT_BY_INIT_PRIORITY.
Igor Kudrin [Tue, 28 Jun 2016 20:56:05 +0000 (13:56 -0700)]
Implement SORT_BY_INIT_PRIORITY.

2016-06-28  Igor Kudrin  <ikudrin@accesssoftek.com>

gold/
PR gold/18098
* script-c.h (Sort_wildcard): Add SORT_WILDCARD_BY_INIT_PRIORITY.
* script-sections.cc (Input_section_sorter::get_init_priority): New method.
(Input_section_sorter::operator()): Handle SORT_WILDCARD_BY_INIT_PRIORITY.
(Output_section_element_input::print): Likewise.
* script.cc (script_keyword_parsecodes): Add entry SORT_BY_INIT_PRIORITY.
* yyscript.y (SORT_BY_INIT_PRIORITY): New token.
(wildcard_section): Handle SORT_BY_INIT_PRIORITY.

* testsuite/Makefile.am (script_test_14): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/script_test_14.s: New test source file.
* testsuite/script_test_14.sh: New test script.
* testsuite/script_test_14.t: New test linker script.

8 years ago[TILEPro] Don't build gdb
Walter Lee [Tue, 28 Jun 2016 18:15:32 +0000 (14:15 -0400)]
[TILEPro] Don't build gdb

In configure.ac, add gdb to noconfigdirs for TILEPro.

       * configure.ac (tilepro-*-*): Add gdb to noconfigdirs.
       * configure: Regenerate.

8 years ago[AArch64] Use int64_t for address offset
Yao Qi [Tue, 28 Jun 2016 16:24:25 +0000 (17:24 +0100)]
[AArch64] Use int64_t for address offset

In AArch64 displaced stepping and fast tracepoint, GDB/GDBserver needs
to check whether the offset can fit in the range.  We are using int32_t
for offset, it is sufficient to get an offset from an instruction, but
it is not enough to get an offset from two addresses.  For example,
we have a BL in shared lib which is at 0x0000002000040774, and the
scratch pad for displaced stepping is at 0x400698.  The offset can't
fit in 28 bit imm.  However, since we are using int32_t for offset, GDB
thinks the offset can fit it, and generate the B instruction with wrong
offset.

It fixes the following fail,

-FAIL: gdb.base/dso2dso.exp: next over call to sub2

gdb:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
variable new_offset.

gdb/gdbserver:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* linux-aarch64-low.c (aarch64_ftrace_insn_reloc_b): Use int64_t
for variable new_offset.
(aarch64_ftrace_insn_reloc_b_cond): Likewise.
(aarch64_ftrace_insn_reloc_cb): Likewise.
(aarch64_ftrace_insn_reloc_tb): Likewise.
(aarch64_install_fast_tracepoint_jump_pad): Likewise.  Use
PRIx64 instead of PRIx32.

8 years agoFix typo in previous commit
Nick Clifton [Tue, 28 Jun 2016 16:03:11 +0000 (17:03 +0100)]
Fix typo in previous commit

8 years agoSkip version check for unreferenced and undefined symbol
H.J. Lu [Tue, 28 Jun 2016 15:08:04 +0000 (08:08 -0700)]
Skip version check for unreferenced and undefined symbol

No need to check version if symbol is unreferenced and undefined.

bfd/

PR ld/20306
* elflink.c (elf_link_check_versioned_symbol): Return false
for unreferenced undefined symbol.

ld/testsuite/

* testsuite/ld-gc/gc.exp: Run pr20306 test.
* ld-gc/pr20306.c: New file.
* ld-gc/pr20306.d: Likewise.

8 years agoFix more linker testsuite failures.
Nick Clifton [Tue, 28 Jun 2016 14:55:22 +0000 (15:55 +0100)]
Fix more linker testsuite failures.

bfin * elf32-bfin.c (bfin_adjust_dynamic_symbol): Fail if a COPY reloc
is needed.

ld * testsuite/ld-elf/comm-data.exp: Expect comm-data2 test to fail
for bfin.
* testsuite/ld-elf/elf.exp: Expect pr14170 and symbolic function
tests to fail for bfin.
* testsuite/ld-elf/endsym.d: Expect to fail with cr16, crx, dlx,
nds32 and visium.
* testsuite/ld-elf/var1.d: Expect to fail with d30v, dlx, ft32 and
microblaze.
* testsuite/ld-pe/pe.exp: Expect foreign symbol test to fail for
mcore-pe.

8 years agoRelax previous restriction on running binutils ar tests for Alpha targets, allowing...
Nick Clifton [Tue, 28 Jun 2016 13:05:34 +0000 (14:05 +0100)]
Relax previous restriction on running binutils ar tests for Alpha targets, allowing the tests to be run for ELF variants.

* testsuite/binutils-all/ar.exp: Relax previous restriction on
Alpha targets.  Allow ELF based Alpha targets.

8 years agoUse `supports_gnu_unique' with the `unique_symbol' and `type' tests
Maciej W. Rozycki [Tue, 28 Jun 2016 12:21:36 +0000 (13:21 +0100)]
Use `supports_gnu_unique' with the `unique_symbol' and `type' tests

Complement commit a43942db49b0 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:

.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets

ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o   (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory

FAIL: ar unique symbol in archive

and:

.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg

../as-new: Please report this bug.

.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr}  /dev/null  (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list

on MIPS/FreeBSD targets:

mips-freebsd  -FAIL: ar unique symbol in archive
mips-freebsd  -FAIL: elf type list
mips64-freebsd  -FAIL: ar unique symbol in archive
mips64-freebsd  -FAIL: elf type list
mips64el-freebsd  -FAIL: ar unique symbol in archive
mips64el-freebsd  -FAIL: elf type list
mipsel-freebsd  -FAIL: ar unique symbol in archive
mipsel-freebsd  -FAIL: elf type list

binutils/
* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
the `unique_symbol' test.

gas/
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
`type' test.

8 years agoMark ARM mapping symbols in object files are precious, so that strip will not remove...
Nick Clifton [Tue, 28 Jun 2016 12:22:49 +0000 (13:22 +0100)]
Mark ARM mapping symbols in object files are precious, so that strip will not remove them.

* elf32-arm.c (elf32_arm_backend_symbol_processing): New
function.  Marks mapping symbols in object files as precious, so
that strip will not remove them.
(elf_backend_symbol_processing): Define.

8 years agoFix RX and M68HC11 linker testsuite failures.
Nick Clifton [Tue, 28 Jun 2016 11:43:14 +0000 (12:43 +0100)]
Fix RX and M68HC11 linker testsuite failures.

ld * testsuite/ld-elf/merge.d: Add m68hc11 to list of targets that
expect to fail this test.
* testsuite/ld-scripts/overlay-size.d: Skip the entire test for
RX.
* testsuite/ld-scripts/rgn-at10.d: No longer expect this test to
fail for the RX.
* testsuite/ld-scripts/rgn-at11.d: Likewise.
* testsuite/ld-scripts/rgn-at2.d: Likewise.
* testsuite/ld-scripts/rgn-at6.d: Likewise.
* testsuite/ld-scripts/rgn-at7.d: Likewise.
* testsuite/ld-scripts/rgn-at8.d: Likewise.

8 years agoImplement get_syscall_trapinfo for arm-linux
Yao Qi [Tue, 28 Jun 2016 11:02:36 +0000 (12:02 +0100)]
Implement get_syscall_trapinfo for arm-linux

gdb/gdbserver:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* linux-arm-low.c (arm_get_syscall_trapinfo): New function.
(the_low_target): Install arm_get_syscall_trapinfo.

8 years agoImplement get_syscall_trapinfo for aarch64-linux
Yao Qi [Tue, 28 Jun 2016 11:02:35 +0000 (12:02 +0100)]
Implement get_syscall_trapinfo for aarch64-linux

gdb/gdbserver:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* linux-aarch64-low.c (aarch64_get_syscall_trapinfo): New
function.
(the_low_target): Install aarch64_get_syscall_trapinfo.

8 years agoRemove parameter sysret from linux_target_ops.get_syscall_trapinfo
Yao Qi [Tue, 28 Jun 2016 11:02:35 +0000 (12:02 +0100)]
Remove parameter sysret from linux_target_ops.get_syscall_trapinfo

When I implement linux_target_ops.get_syscall_trapinfo for aarch64 and arm,
I find the second parameter sysret isn't used at all.  In RSP, we don't
need syscall return value either, because GDB can figure out the return
value from registers content got by 'g' packet.

This patch is to remove them.

gdb/gdbserver:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* linux-low.c (get_syscall_trapinfo): Remove parameter sysret.
Callers updated.
* linux-low.h (struct linux_target_ops) <get_syscall_trapinfo>:
Remove parameter sysno.
* linux-x86-low.c (x86_get_syscall_trapinfo): Remove parameter
sysret.

8 years agoProbe catch syscall support
Yao Qi [Tue, 28 Jun 2016 11:02:35 +0000 (12:02 +0100)]
Probe catch syscall support

In 82075af2c14b1f8a54fa5796fb63f7ef23f98d9d (Implement 'catch syscall'
for gdbserver), only x86 is supported, but the test can still be run
on other linux targets, like aarch64 and ppc, with native-gdbserver.
This causes many new fails.

This patch removes the check on isnative and on target triplets.
Instead, we can insert catch point, and resume the program to see whether
catch syscall is supported or not.

gdb/testsuite:

2016-06-28  Yao Qi  <yao.qi@linaro.org>

* gdb.base/catch-syscall.exp: Remove check on isnative and target
triplets.  Start gdb, execute catch syscall, and continue.  Check
gdb's output to determine catch syscall is supported.

8 years agoDon't convert R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
James Clarke [Tue, 28 Jun 2016 11:00:56 +0000 (12:00 +0100)]
Don't convert R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.

bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.

gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.

ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.

8 years agoMIPS/LD/testsuite: Accept any UNIX OS/ABI with GNU attribute tests
Maciej W. Rozycki [Tue, 28 Jun 2016 10:08:58 +0000 (11:08 +0100)]
MIPS/LD/testsuite: Accept any UNIX OS/ABI with GNU attribute tests

Remove failures with FreeBSD targets, e.g:

regexp_diff match failure
regexp "^  OS/ABI:                            UNIX - System V$"
line   "  OS/ABI:                            UNIX - FreeBSD"
FAIL: ld-mips-elf/attr-gnu-4-50

introduced with commit 351cdf24d223 ("[MIPS] Implement O32 FPXX, FP64
and FP64A ABI extensions").

ld/
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Match any UNIX OS/ABI.
* testsuite/ld-mips-elf/attr-gnu-4-50.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-60.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-70.d: Likewise.

8 years agoFix new testcase for hppa64
Alan Modra [Tue, 28 Jun 2016 09:33:59 +0000 (19:03 +0930)]
Fix new testcase for hppa64

Anything in first column is a label on hppa64.

PR gas/20247
* testsuite/gas/elf/section11.s: Don't start directives in first column.

8 years agoDon't run ld-scripts/pr20302 on linuxaout
Alan Modra [Tue, 28 Jun 2016 09:32:08 +0000 (19:02 +0930)]
Don't run ld-scripts/pr20302 on linuxaout

PR ld/20302
* testsuite/ld-scripts/pr20302.d: Exclude *-*-*aout.

8 years agoInvalid read in _bfd_elf_get_symbol_version_string
Alan Modra [Tue, 28 Jun 2016 09:29:33 +0000 (18:59 +0930)]
Invalid read in _bfd_elf_get_symbol_version_string

PR 20304
* objdump.c (objdump_print_symname): Don't attempt to retrieve
version info from synthetic symbols.

8 years ago[AArch64] Make register indices be full 64-bit values
Richard Sandiford [Tue, 28 Jun 2016 08:21:04 +0000 (09:21 +0100)]
[AArch64] Make register indices be full 64-bit values

aarch64_opnd_info used bitfields to hold vector element indices,
but values were stored into those bitfields before their ranges had
been checked.  This meant large invalid indices could be silently
truncated to smaller valid indices.

The two obvious fixes were to do the range checking earlier or use
a full 64-bit field for the index.  I went for the latter for two
reasons:

      - Doing the range checking in operand_general_constraint_met_p
        seems structurally cleaner than doing it while parsing.

      - The bitfields didn't really buy us anything.  The imm field
        of the union is already 128 bits, so we can use a full int64_t
        index without growing the structure.

The patch also adds missing range checks for the elements in a register
list index.

include/
* opcode/aarch64.h (aarch64_opnd_info): Change index fields to int64_t.

opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Check the
range of ldst_elemlist operands.
(print_register_list): Use PRIi64 to print the index.
(aarch64_print_operand): Likewise.

gas/
* testsuite/gas/aarch64/diagnostic.s,
testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices.

8 years agoMIPS16: Add R_MIPS16_PC16_S1 branch relocation support
Maciej W. Rozycki [Tue, 28 Jun 2016 00:23:36 +0000 (01:23 +0100)]
MIPS16: Add R_MIPS16_PC16_S1 branch relocation support

For R_MIPS16_PC16_S1 the calculation is `(sign_extend(A) + S - P) >> 1'
and the usual MIPS16 bit shuffling applies to relocated field handling,
as per the encoding of the branch target in the extended form of the
MIPS16 B, BEQZ, BNEZ, BTEQZ and BTNEZ instructions.

include/
* elf/mips.h (R_MIPS16_PC16_S1): New relocation.

bfd/
* elf32-mips.c (elf_mips16_howto_table_rel): Add
R_MIPS16_PC16_S1.
(mips16_reloc_map): Likewise.
* elf64-mips.c (mips16_elf64_howto_table_rel): Likewise.
(mips16_elf64_howto_table_rela): Likewise.
(mips16_reloc_map): Likewise.
* elfn32-mips.c (elf_mips16_howto_table_rel): Likewise.
(elf_mips16_howto_table_rela): Likewise.
(mips16_reloc_map): Likewise.
* elfxx-mips.c (mips16_branch_reloc_p): New function.
(mips16_reloc_p): Handle R_MIPS16_PC16_S1.
(b_reloc_p): Likewise.
(mips_elf_calculate_relocation): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
* reloc.c (BFD_RELOC_MIPS16_16_PCREL_S1): New relocation.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

gas/
* config/tc-mips.c (mips16_reloc_p): Handle
BFD_RELOC_MIPS16_16_PCREL_S1.
(b_reloc_p): Likewise.
(limited_pcrel_reloc_p): Likewise.
(md_pcrel_from): Likewise.
(md_apply_fix): Likewise.
(tc_gen_reloc): Likewise.
(md_convert_frag): Likewise.
(mips_fix_adjustable): Update comment.
* testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-branch-addend-2.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-branch-addend-3.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Remove error
output, add dump patterns.
* testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file.
* testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file.
* testsuite/gas/mips/mips16-branch-addend-2.l: Remove file.
* testsuite/gas/mips/mips16-branch-addend-3.l: Remove file.
* testsuite/gas/mips/mips16-branch-absolute.l: Remove file.
* testsuite/gas/mips/mips16-branch-addend-2.s: Add padding.
* testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid
implicit instruction padding, avoid MIPS16 JR->JRC conversion.
* testsuite/gas/mips/branch-weak-6.d: New test.
* testsuite/gas/mips/branch-weak-7.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.

ld/
* testsuite/ld-mips-elf/mips16-branch-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-3.d: New test.
* testsuite/ld-mips-elf/mips16-branch-addend-2.d: New test.
* testsuite/ld-mips-elf/mips16-branch-addend-3.d: New test.
* testsuite/ld-mips-elf/mips16-branch.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.

8 years agoAutomatic date update in version.in
GDB Administrator [Tue, 28 Jun 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoFix changelog
Manish Goregaokar [Mon, 27 Jun 2016 16:54:15 +0000 (22:24 +0530)]
Fix changelog

8 years agoPrint void types correctly in Rust
Manish Goregaokar [Mon, 27 Jun 2016 15:46:59 +0000 (21:16 +0530)]
Print void types correctly in Rust

Rust prefers to not specify the return type of a function when it is unit
(`()`). The type is also referred to as "void" in debuginfo but not in actual
usage, so we should never be printing "void" when the language is Rust.

2016-06-27  Manish Goregaokar  <manish@mozilla.com>

gdb/ChangeLog:
    * rust-lang.c (rust_print_type): Print unit types as "()"
    * rust-lang.c (rust_print_type): Omit return type for functions
    returning unit

gdb/testsuite/ChangeLog:
    * gdb.rust/simple.rs: Add test for returning unit in a function
    * gdb.rust/simple.exp: Add expectation for functions returning unit

8 years agoMake the kernel dwarf stack unwinder work for ARC targets.
Vineet Gupta [Mon, 27 Jun 2016 15:50:29 +0000 (16:50 +0100)]
Make the kernel dwarf stack unwinder work for ARC targets.

* config//tc-arc.c (tc_arc_frame_initial_instructions): Use
cfi_add_CFA_def_cfa to generate default CFA with offset
* testsuite/gas/cfi/cfi-arc-1.d: Update expected output.

8 years agoAllow a second -T<section>=<addr> to override a previous version on the same linker...
Nick Clifton [Mon, 27 Jun 2016 15:35:58 +0000 (16:35 +0100)]
Allow a second -T<section>=<addr> to override a previous version on the same linker command line.

PR ld/20302
* lexsup.c (set_segment_start): If resetting the start address of
a section, remember to generate a new script element as well.
* testsuite/ld-scripts/pr20302.d: New test.
* testsuite/ld-scripts/scripts.exp: Run the new test.

8 years agooops - omitted from previous delta
Nick Clifton [Mon, 27 Jun 2016 12:52:20 +0000 (13:52 +0100)]
oops - omitted from previous delta

8 years agoAdd command line option to stop the assembler from padding the end of sections to...
Nick Clifton [Mon, 27 Jun 2016 12:49:09 +0000 (13:49 +0100)]
Add command line option to stop the assembler from padding the end of sections to their alignment boundary.

PR gas/20247
* as.h (do_not_pad_sections_to_alignment): New global variable.
* as.c (show_usage): Add --no-pad-sections.
(parse_args): Likewise.
* write.c (size_seg): Skip padding the end of the section if
requested from the command line.
(SUB_SEGMENT_ALIGN): Likewise.
* doc/as.texinfo: Document the new option.
* NEWS: Mention the new feature.
* testsuite/gas/elf/section11.s: New test.
* testsuite/gas/elf/section11.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.

8 years agoPR 19264 looping in ppc64_elf_size_stubs
Alan Modra [Mon, 27 Jun 2016 10:30:09 +0000 (20:00 +0930)]
PR 19264 looping in ppc64_elf_size_stubs

b399102 fixed the testcase in this PR but it may be possible to
trigger the problem in other ways.

PR ld/19264
* elf64-ppc.c (STUB_SHRINK_ITER): Define.
(ppc64_elf_size_stubs): Exit stub sizing loop past STUB_SHRINK_ITER
if shrinking stubs.
(ppc64_elf_size_stubs): Adjust to suit.

8 years agoFix use of a dangling pointer for Python breakpoint objects
Pierre-Marie de Rodat [Mon, 27 Jun 2016 10:11:25 +0000 (12:11 +0200)]
Fix use of a dangling pointer for Python breakpoint objects

When a Python script tries to create a breakpoint but fails to do so,
gdb.Breakpoint.__init__ raises an exception and the breakpoint does not
exist anymore in the Python interpreter. However, GDB still keeps a
reference to the Python object to be used for a later hook, which is
wrong.

This commit adds the necessary cleanup code so that there is no stale
reference to this Python object. It also adds a new testcase to
reproduce the bug and check the fix.

2016-06-25  Pierre-Marie de Rodat  <derodat@adacore.com>

gdb/
* python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
when there is an error during the breakpoint creation.

gdb/testsuite

* gdb.python/py-breakpoint-create-fail.c,
gdb.python/py-breakpoint-create-fail.exp,
gdb.python/py-breakpoint-create-fail.py: New testcase.

8 years agoadd ChangeLog entries
Trevor Saunders [Mon, 27 Jun 2016 10:01:34 +0000 (06:01 -0400)]
add ChangeLog entries

8 years agodlx: move prototype of dlx_set_skip_hi16 to elf/dlx.h
Trevor Saunders [Sat, 4 Jun 2016 01:43:06 +0000 (21:43 -0400)]
dlx: move prototype of dlx_set_skip_hi16 to elf/dlx.h

bfd/ChangeLog:

2016-06-27  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* elf32-dlx.h: New file.
* elf32-dlx.c: Adjust.

gas/ChangeLog:

2016-06-27  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-dlx.c: Include bfd/elf32-dlx.h.
* config/tc-dlx.h: Remove prototype of dlx_set_skip_hi16.

8 years agoxtensa: remove a sentinal
Trevor Saunders [Mon, 23 May 2016 04:35:40 +0000 (00:35 -0400)]
xtensa: remove a sentinal

gas/ChangeLog:

2016-06-27  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-xtensa.c (xtensa_elf_suffix): Use ARRAY_SIZE instead of a
sentinal element.
(map_suffix_reloc_to_operator): Likewise.
(map_operator_to_reloc): Likewise.

8 years agonds32: remove a sentinal
Trevor Saunders [Sat, 28 May 2016 22:16:47 +0000 (18:16 -0400)]
nds32: remove a sentinal

gas/ChangeLog:

2016-06-27  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-nds32.c (md_begin): Use ARRAY_SIZE instead of a sentinal
element in relax_table.

8 years agoAutomatic date update in version.in
GDB Administrator [Mon, 27 Jun 2016 00:00:10 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoAutomatic date update in version.in
GDB Administrator [Sun, 26 Jun 2016 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoaarch64: make the type of reg_entry::type aarch64_reg_type
Trevor Saunders [Sat, 4 Jun 2016 21:56:32 +0000 (17:56 -0400)]
aarch64: make the type of reg_entry::type aarch64_reg_type

gas/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-aarch64.c: Make the type of reg_entry::type
aarch_reg_type.

8 years agoremove a few sentinals
Trevor Saunders [Thu, 21 Apr 2016 13:56:50 +0000 (09:56 -0400)]
remove a few sentinals

gas/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-bfin.c (bfin_cpus): Remove sentinal.
(md_parse_option): Adjust.
* config/tc-aarch64.c (aarch64_parse_abi): Replace use of a sentinal
with iteration from 0 to ARRAY_SIZE.
* config/tc-mcore.c (md_begin): Likewise.
* config/tc-visium.c (visium_parse_arch): Likewise.

opcodes/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* mcore-opc.h: Remove sentinal.
* mcore-dis.c (print_insn_mcore): Adjust.

8 years agosimplify tic54x_set_default_include ()
Trevor Saunders [Mon, 6 Jun 2016 02:25:21 +0000 (22:25 -0400)]
simplify tic54x_set_default_include ()

its only called with an argument of 0, so we might as well remove the code
supporting other values.

gas/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-tic54x.c (tic54x_set_default_include): remove argument
   and simplify accordingly.
(tic54x_include): Adjust.
(tic54x_mlib): Likewise.

8 years agoxtensa: prototype xtensa_make_property_section in elf/xtensa.h
Trevor Saunders [Sat, 4 Jun 2016 20:46:58 +0000 (16:46 -0400)]
xtensa: prototype xtensa_make_property_section in elf/xtensa.h

There's no reason to have multiple prototypes for the same function.

include/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* elf/xtensa.h (xtensa_make_property_section): New prototype.

gas/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-xtensa.c (xtensa_make_property_section): Remove prototype.

bfd/ChangeLog:

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* elf32-xtensa.c (xtensa_make_property_section): Remove prototype.

8 years agoFix formatting in rust-lang.c
Tom Tromey [Sat, 25 Jun 2016 14:41:45 +0000 (08:41 -0600)]
Fix formatting in rust-lang.c

This fixes up a few formatting nits in rust-lang.c.
Built and regtested on x86-64 Fedora 23.

2016-06-25  Tom Tromey  <tom@tromey.com>

* rust-lang.c (rust_get_disr_info, rust_print_type): Fix
formatting.

8 years agoAdd tests for printing of NonZero-optimized enums in Rust
Manish Goregaokar [Sat, 25 Jun 2016 05:40:38 +0000 (11:10 +0530)]
Add tests for printing of NonZero-optimized enums in Rust

gdb/testsuite/ChangeLog:
2016-06-25  Manish Goregaokar  <manish@mozilla.com>

    PR gdb/20239
    * gdb.rust/simple.rs: Add more tests for printing NonZero enums.
    * gdb.rust/simple.exp: Add test expectations for new NonZero tests.

8 years agoMake evaluation and type-printing of all NonZero optimized enums work
Manish Goregaokar [Sat, 25 Jun 2016 05:39:23 +0000 (11:09 +0530)]
Make evaluation and type-printing of all NonZero optimized enums work

gdb/ChangeLog:
2016-06-25  Manish Goregaokar  <manish@mozilla.com>

    PR gdb/20239
    * rust-lang.c (rust_get_disr_info): Correctly interpret
    NonZero-optimized enums of arbitrary depth.
    (rust_print_type): Correctly print NonZero-optimized
    enums.

8 years agoSupport structure offsets that are 512K or larger.
David Taylor [Tue, 12 Apr 2016 19:02:57 +0000 (15:02 -0400)]
Support structure offsets that are 512K or larger.

GDB computes structure byte offsets using a 32 bit integer.  And,
first it computes the offset in bits and then converts to bytes.  The
result is that any offset that if 512K bytes or larger overflows.
This patch changes GDB to use LONGEST for such calculations.

PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
* c-lang.h: Change all parameters, variables, and struct or union
members used as struct or union fie3ld offsets from int to
LONGEST.
* c-valprint.c: Likewise.
* cp-abi.c: Likewise.
* cp-abi.h: Likewise.
* cp-valprint.c: Likewise.
* d-valprint.c: Likewise.
* dwarf2loc.c: Likewise.
* eval.c: Likewise.
* extension-priv.h: Likewise.
* extension.c: Likewise.
* extension.h: Likewise.
* findvar.c: Likewise.
* gdbtypes.h: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-valprint.c: Likewise.
* guile/guile-internal.h: Likewise.
* guile/scm-pretty-print.c: Likewise.
* jv-valprint.c Likewise.
* opencl-lang.c: Likewise.
* p-lang.h: Likewise.
* python/py-prettyprint.c: Likewise.
* python/python-internal.h: Likewise.
* spu-tdep.c: Likewise.
* typeprint.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* valprint.h: Likewise.
* value.c: Likewise.
* value.h: Likewise.
* p-valprint.c: Likewise.
* c-typeprint.c (c_type_print_base): When printing offset, use
plongest, not %d.
* gdbtypes.c (recursive_dump_type): Ditto.

8 years agoAutomatic date update in version.in
GDB Administrator [Sat, 25 Jun 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in

8 years agoMIPS16/GAS: Restore unsupported relocation diagnostics
Maciej W. Rozycki [Fri, 24 Jun 2016 23:49:10 +0000 (00:49 +0100)]
MIPS16/GAS: Restore unsupported relocation diagnostics

Correct a MIPS16 relocation handling regression in GAS introduced with:

commit 177b4a6ad0047c8995fbc55016bc4f4b68d53b4a
Author: Alexandre Oliva <aoliva@redhat.com>
Date:   Mon Mar 18 18:56:18 2002 +0000

discussed at <https://sourceware.org/ml/binutils/2002-03/msg00345.html>,
which removed a preparatory call to `mips16_extended_frag' previously
made from `md_estimate_size_before_relax'.  As a result the function is
never called with its `sec' parameter non-NULL and consequently all the
unsupported relocation checks within are dead and never trigger, causing
any unhandled relocations to silently resolve to 0.  Unfortunately there
was no sufficient test suite coverage back then to catch this.

Remove all dead code then, and all the associated comments.  Update the
remaining call to `mips16_extended_frag' from `mips_relax_frag' to pass
the relocation section as the `sec' parameter and use it to mark frags
which require an external relocation, as extended.  Finally handle any
outstanding MIPS16 relocations in `md_convert_frag' and report an error
since we don't support any except with percent operators.

gas/
* config/tc-mips.c (append_insn): Use any `O_symbol' expression
unchanged with relaxed MIPS16 instructions.
(mips16_extended_frag): Adjust accordingly.  Return 1 right
away if a relocation will be required for the symbol requested.
Remove dead first relaxation pass code.
(mips_relax_frag): Pass `sec' down to `mips16_extended_frag'.
(md_convert_frag): Adjust symbol value calculation.  Raise an
error if a relocation is required for the symbol requested.
* testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns,
add error output.
* testsuite/gas/mips/mips16@relax-swap3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-relax-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-0.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-1.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-2.d: New test.
* testsuite/gas/mips/mips16-pcrel-addend-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-absolute.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-0.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-1.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-2.d: New test.
* testsuite/gas/mips/mips16-branch-reloc-3.d: New test.
* testsuite/gas/mips/mips16-branch-addend-0.d: New test.
* testsuite/gas/mips/mips16-branch-addend-1.d: New test.
* testsuite/gas/mips/mips16-branch-addend-2.d: New test.
* testsuite/gas/mips/mips16-branch-addend-3.d: New test.
* testsuite/gas/mips/mips16-branch-absolute.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-0.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-1.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-2.d: New test.
* testsuite/gas/mips/mips16-absolute-reloc-3.d: New test.
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output.
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output.
* testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-absolute.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-branch-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-2.l: New error output.
* testsuite/gas/mips/mips16-branch-addend-3.l: New error output.
* testsuite/gas/mips/mips16-branch-absolute.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output.
* testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output.
* testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source.
* testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source.
* testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source.
* testsuite/gas/mips/mips16-pcrel-absolute.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-branch-reloc-3.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-0.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-1.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-2.s: New test source.
* testsuite/gas/mips/mips16-branch-addend-3.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source.
* testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.