Doug Evans [Fri, 15 Aug 2014 22:24:35 +0000 (15:24 -0700)]
(dwarf_decode_lines_1): Delete local basic_block, unused.
* dwarf2read.c (dwarf_decode_lines_1): Delete local basic_block,
unused.
Eli Zaretskii [Fri, 15 Aug 2014 14:04:27 +0000 (17:04 +0300)]
Avoid compiler warnings about incomplete parameter types.
gdb/ChangeLog:
* dcache.h: Include target.h, to avoid compile time warnings.
Joel Brobecker [Wed, 13 Aug 2014 18:15:00 +0000 (11:15 -0700)]
Add "frame.h" #include in gdbarch.h.
This include is needed because gdbarch_dummy_id needs the full
definition of struct frame_id.
gdb/ChangeLog:
* gdbarch.sh: #include "frame.h" in gdbarch.h. Delete "struct
frame_info" partial declaration.
* gdbarch.h: Regenerate.
Tested on x86_64-linux by rebuilding GDB.
Yao Qi [Thu, 14 Aug 2014 07:24:58 +0000 (15:24 +0800)]
Skip tfile.exp if unable to generate trace file
I added proc generate_tracefile in this patch
https://sourceware.org/ml/gdb-patches/2014-03/msg00591.html but
tfile.exp isn't skipped as changelog entry said:
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
it is a mistake I made at the last minute. Patch below fixed it.
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
false.
Alan Modra [Fri, 15 Aug 2014 00:01:09 +0000 (09:31 +0930)]
daily update
Yao Qi [Thu, 14 Aug 2014 02:51:10 +0000 (10:51 +0800)]
Set print symbol off in some tests
GDB in default prints the symbol associated on an address, and tests
assume that there is no symbol on address zero. However, on bare
metal target, address may be mapped to zero and there may be a
symbol. Then, some tests fail as below:
print const_cast<void *> (0)^M
$8 = (void *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/casts.exp: const_cast of 0
p acp->c1^M
$9 = (A *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/class2.exp: p acp->c1
This patch is to set print symbol off in these tests, like what
I did previously https://sourceware.org/ml/gdb-patches/2014-07/msg00257.html
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.cp/casts.exp: Set print symbol off.
* gdb.cp/class2.exp: Likewise.
* gdb.cp/overload.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
Yao Qi [Mon, 4 Aug 2014 06:26:25 +0000 (14:26 +0800)]
Remove pst from dwarf_decode_lines_1
Hi,
Parameter 'pst' of function dwarf_decode_lines_1 isn't used except
to compute decode_for_pst_p, which has been got in the caller
dwarf_decode_lines. I wonder it would be good if we just pass
'decode_for_pst_p'.
gdb:
2014-08-15 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines_1): Remove parameter 'pst'.
Add parameter 'decode_for_pst_p'. Callers update.
Mike Frysinger [Sat, 26 Jul 2014 18:27:28 +0000 (23:57 +0530)]
opcodes: blackfin: convert ad-hoc ints to bfd_boolean
These various int fields are being used as booleans, so change to the
existing bfd_boolean style.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 4 Dec 2013 00:17:03 +0000 (19:17 -0500)]
opcodes: blackfin: simplify decode_CC2stat_0 logic
These multiple if statements can be condensed down into a single if
statement and an array of strings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 5 Feb 2011 21:47:02 +0000 (16:47 -0500)]
opcodes: blackfin: avoid duplicate memory reads
Rather than reading the same memory twice, pass the value back up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Alan Modra [Thu, 14 Aug 2014 06:23:19 +0000 (15:53 +0930)]
Fix for objdump segfault on broken PE executable
* peXXigen.c (pe_print_reloc): Protect against access past end
of .reloc section.
Alan Modra [Thu, 14 Aug 2014 04:19:31 +0000 (13:49 +0930)]
Linker part of PR16563 fix
Presents .eh_frame input sections to the optimisation machinery in
elf-eh-frame.c in the order they are given by the linker script.
PR 16563
bfd/
* elflink.c (bfd_elf_discard_info): Process .eh_frame and .stab
in the order they are mapped to output sections.
ld/
* ldlang.c (map_head_is_link_order): Rename from
stripped_excluded_sections.
(lang_clear_os_map): New function, extracted from..
(strip_excluded_output_sections): ..here.
* ldlang.h (lang_clear_os_map): Declare.
* ldwrite.c (ldwrite): Call lang_clear_os_map.
* emultempl/sh64elf.em (sh64_elf_${EMULATION_NAME}_after_allocation):
Likewise.
Alan Modra [Thu, 14 Aug 2014 04:16:09 +0000 (13:46 +0930)]
configury changes to make ld plugin support controlled by --enable-plugins
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
Alan Modra [Thu, 14 Aug 2014 01:13:41 +0000 (10:43 +0930)]
Simplify is_ir_dummy_bfd test
is_ir_dummy_bfd started life before BFD_PLUGIN was invented.
* plugin.c (is_ir_dummy_bfd): Test BFD_PLUGIN flag rather than
flags.claimed.
Sriraman Tallam [Thu, 14 Aug 2014 01:40:19 +0000 (18:40 -0700)]
Add option -no-pie.
Alan Modra [Thu, 14 Aug 2014 00:01:08 +0000 (09:31 +0930)]
daily update
Stefan Kristiansson [Wed, 13 Aug 2014 20:17:50 +0000 (23:17 +0300)]
bfd: or1k: avoid emitting R_OR1K_INSN_REL_26 in shared libs
This fixes a bug where R_OR1K_INSN_REL_26 relocations would be emitted
into shared libraries even when the referenced symbol was hidden
or the symbol was contained in the same .so which had been
linked with -Bsymbolic.
bfd/
* elf32-or1k.c (or1k_elf_relocate_section, or1k_elf_check_relocs,
allocate_dynrelocs): Use SYMBOL_REFERENCES_LOCAL, SYMBOL_CALLS_LOCAL
and SYMBOLIC_BIND.
Mike Frysinger [Sat, 5 Feb 2011 21:37:39 +0000 (16:37 -0500)]
opcodes: blackfin: push down global state
The variables used to track insn state should be pushed down into the
private_data structure to avoid pollution across calls.
This also happens to fix the output when hitting comments/invalid insns
which needs to tweak a gas test.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 26 Jul 2014 18:14:37 +0000 (23:44 +0530)]
opcodes: blackfin: do not force align the PC
If the user gives us an unaligned PC, then dump an error as such.
Otherwise if you try to disassemble at an odd address, the output
will look weird (it'll read one byte earlier).
This can be seen in one of the gas tests where data is in the middle
of .text, so move the data to .data like it should be in the first place.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 5 Feb 2011 06:42:19 +0000 (01:42 -0500)]
opcodes: blackfin: handle memory read errors
The current code ignores memory read errors which isn't a great idea.
So add a helper function which takes care of error checking and update
the code to use that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Yaakov Selkowitz [Wed, 13 Aug 2014 10:43:28 +0000 (11:43 +0100)]
This is necessary for adding __cxa_atexit support for Cygwin in GCC without
exporting __dso_handle from every DLL.
* pe-dll.c (autofilter_entry_type autofilter_symbollist_i386): Add
__dso_handle.
Yao Qi [Tue, 1 Jul 2014 00:53:41 +0000 (08:53 +0800)]
Fix build/17104
This patch is to fix the build error when GDB is configured as:
CFLAGS=-Wall ./configure --with-babeltrace; make
This patch adds one line of code in configure test to use local
variable 'pos'.
Note that we append -Werror to CFLAGS to catch the warning related to
assignment to scope. See more in this thread
https://sourceware.org/ml/gdb-patches/2014-08/msg00045.html
2014-08-13 Yao Qi <yao@codesourcery.com>
PR build/17104
* configure.ac: Use local variable 'pos'.
* configure: Regenerated.
Alan Modra [Wed, 13 Aug 2014 00:01:13 +0000 (09:31 +0930)]
daily update
H.J. Lu [Tue, 12 Aug 2014 22:53:48 +0000 (15:53 -0700)]
Remove type directive
* gas/i386/omit-lock.s: Remove type directive.
Alan Modra [Tue, 12 Aug 2014 22:02:21 +0000 (07:32 +0930)]
Fix non-ELF build breakage
* ldlang.c (open_input_bfds): Don't use bfd_elf_get_dyn_lib_class.
Alan Modra [Tue, 12 Aug 2014 10:57:19 +0000 (20:27 +0930)]
Tighten test for ld plugin support
To not match spu --plugin option.
* lib/ld-lib.exp (check_plugin_api_available): Match "-plugin PLUGIN".
Alan Modra [Tue, 12 Aug 2014 09:59:33 +0000 (19:29 +0930)]
Fix build breakage when ld plugins disabled
* ldlang.h (struct lang_input_statement_flags): Don't make "reload"
field conditional on ENABLE_PLUGINS.
* ldlang.c (open_input_bfds): Expand plugin_should_reload.
* plugin.h (plugin_should_reload): Delete.
* plugin.c (plugin_should_reload): Delete.
Alan Modra [Tue, 12 Aug 2014 01:13:33 +0000 (10:43 +0930)]
Change ld "notice" interface for better handling of indirect symbols
The main aim of this change was to have non_ir_ref set correctly on
new indirect symbols. I could have added a "copy" param to the "notice"
function, so that indirect symbols could be created in plugin_notice,
but it seemed cleaner to create indirect syms earlier and pass them
rather than "string" to "notice".
include/
* bfdlink.h (struct bfd_link_callbacks <notice>): Remove "string"
param, add "inh".
bfd/
* coff-aux.c (coff_m68k_aux_link_add_one_symbol): Only call "notice"
here when not calling the generic add_symbol function. Formatting.
Correct handling of indirect symbols. Update notice call.
* elflink.c (_bfd_elf_notice_as_needed): Update notice call.
* linker.c (_bfd_generic_link_add_one_symbol): Create indirect
symbols early. Update notice call. Add comments regarding weak
symbols vs. indirect.
ld/
* ldmain.c (notice): Update args.
* plugin.c (plugin_notice): Likewise. Follow warning sym link.
Handle new indirect symbol.
Alan Modra [Tue, 12 Aug 2014 01:38:26 +0000 (11:08 +0930)]
missing changelog
Alan Modra [Tue, 12 Aug 2014 01:01:41 +0000 (10:31 +0930)]
Fix non-plugin warning symbol handling
PR ld/16746
include/
* bfdlink.h (struct bfd_link_info): Add lto_plugin_active.
bfd/
* linker.c (_bfd_generic_link_add_one_symbol <WARN>): Handle
!lto_plugin_active.
ld/
* plugin.c (plugin_load_plugins): Set link_info.lto_plugin_active.
Doug Evans [Tue, 12 Aug 2014 00:21:07 +0000 (17:21 -0700)]
Delete "Loaded symbols for ..." message, it is redundant.
* solib.c (solib_read_symbols): Delete "Loaded symbols for ..."
message, it is redundant with "Reading symbols from ..." message.
testsuite/
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
(test_load_shlib): Update.
Alan Modra [Tue, 12 Aug 2014 00:00:56 +0000 (09:30 +0930)]
daily update
Doug Evans [Mon, 11 Aug 2014 04:09:29 +0000 (21:09 -0700)]
linux-nat.c (linux_nat_thread_address_space): Delete dead code.
Alan Modra [Mon, 11 Aug 2014 00:00:44 +0000 (09:30 +0930)]
daily update
Alan Modra [Sun, 10 Aug 2014 00:01:02 +0000 (09:31 +0930)]
daily update
Yao Qi [Fri, 8 Aug 2014 05:45:23 +0000 (13:45 +0800)]
Fix PR remote/9053: remove dead code on query packet size
The code becomes dead as GDB evolves. In 2003, Andrew Cagney post patch
https://sourceware.org/ml/gdb-patches/2003-10/msg00511.html to add target
read/write partial methods. They support query buffer size when both
OFFSET and LEN is zero, and it was used in avr-tdep.c and kod.c. Then,
Daniel added target_read_object_alloc and avr-tdep.c switches to use that
in patch https://sourceware.org/ml/gdb-patches/2006-07/msg00009.html
From then on, GDB on longer queries the buffer size, so the code
returning packet size in remote_xfer_partial became dead.
PR 17060 is duplicated of PR 9053, so I mention the latter in the
ChangeLog entry. Rebuild GDB with this patch. OK to apply?
I'll mark PR 17060 as duplicated once the patch is applied.
gdb:
2014-08-09 Yao Qi <yao@codesourcery.com>
PR remote/9053
* remote.c (remote_xfer_partial): Remove dead code.
Yao Qi [Thu, 7 Aug 2014 08:09:38 +0000 (16:09 +0800)]
Remove duplicated code on checking address 0x0 is accessiable
I find some gdb.python tests fail on arm-none-eabi target, because the
tests assume that memory on address 0x is inaccessible. Some tests
(in gdb.base) are aware of this, so do a "x 0" check first. However,
the code is copy-n-paste.
This patch is to move the "x 0" check to a procedure in lib/gdb.exp,
and get needed tests call it. The original code matches pattern
"0x0:\[ \t\]*Error accessing memory address 0x0\r\n$gdb_prompt $", but
I remove it from the new proc is_address_zero_readable, because GDB
doesn't emit such message any more.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
* gdb.base/display.exp: Invoke is_address_zero_readable.
* gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* gdb.base/hbreak-unmapped.exp: Return if
is_address_zero_readable returns true.
* gdb.base/signest.exp: Likewise.
* gdb.base/signull.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.guile/scm-disasm.exp: Do the test if
is_address_zero_readable returns false.
* gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
* gdb.python/py-arch.exp: Likewise.
* gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
* lib/gdb.exp (is_address_zero_readable): New proc.
Yao Qi [Thu, 7 Aug 2014 07:01:22 +0000 (15:01 +0800)]
Make test messages in gdb.mi/mi-var-display.exp unique
When I fix a bug in gdb.mi/mi-var-display.exp, I find its test
messages aren't unique, which makes some confusions for me.
$ cat testsuite/gdb.sum | grep "PASS" | sort | uniq -c | sort -n
...
2 PASS: gdb.mi/mi-var-display.exp: set format variable bar
2 PASS: gdb.mi/mi-var-display.exp: set format variable foo
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr
2 PASS: gdb.mi/mi-var-display.exp: show format variable foo
3 PASS: gdb.mi/mi-var-display.exp: eval variable foo
This patch is to make test messages in mi-var-display.exp unique.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
PR testsuite/13443
* gdb.mi/mi-var-display.exp: Make test messages unique.
Ulrich Drepper [Sat, 9 Aug 2014 00:26:41 +0000 (20:26 -0400)]
* ldlang.h (struct lang_input_statement_flags): Add pushed
member.
* ldlex.h (enum option_values): Add OPTION_PUSH_STATE and
OPTION_POP_STATE.
* lexsup.c (ld_options): Add entries for --push-state and
--pop-state.
(parse_args): Handle OPTION_PUSH_STATE and OPTION_POP_STATE.
* ld.texinfo: Document --push-state and --pop-state.
Alan Modra [Sat, 9 Aug 2014 00:00:59 +0000 (09:30 +0930)]
daily update
Jing Yu [Fri, 8 Aug 2014 21:18:35 +0000 (14:18 -0700)]
gold aarch64 patch to enable linking hello_wolrd.
elfcpp/ChangeLog:
2014-08-08 Han Shen <shenhan@google.com>
* aarch64.h (withdrawn): Replaced with R_AARCH64_withdrawn.
2014-08-08 Jing Yu <jingyu@google.com>
Han Shen <shenhan@google.com>
* Makefile.am (HFILES): Add aarch64-reloc-property.h.
(DEFFILES): add aarch64-reloc.def.
(TARGETSOURCES): Add aarch64-reloc-property.cc.
(ALL_TARGETOBJS): Add aarch64-reloc-property.$(OBJEXT).
* Makefile.in: Regenerate.
* aarch64-reloc-property.cc: New file.
* aarch64-reloc-property.h: New file.
* aarch64-reloc.def: New file.
* aarch64.cc: Include aarch64-reloc-property.h. Replace spaces
with tab to make the format consistent.
(Output_data_got_aarch64::symbol_table_): New method.
(Target_aarch64::do_plt_address_for_global): New method.
(Target_aarch64::do_plt_address_for_local): New method.
(Target_aarch64::do_select_as_default_target): New method.
(Target_aarch64::do_make_data_plt): New method.
(Target_aarch64::make_data_plt): New method.
(Output_data_plt_aarch64::has_irelative_section): New method.
(Output_data_plt_aarch64::address_for_global): New method.
(Output_data_plt_aarch64::address_for_local): New method.
(Output_data_plt_aarch64::irelative_rel_): New parameter.
(Output_data_plt_aarch64::add_entry): Implement contents.
(Output_data_plt_aarch64::set_final_data_size): Fix typo.
(Output_data_plt_aarch64::do_write): Remove useless got_base. Set
the got_pov entry to plt0.
(Output_data_plt_aarch64_standard::do_fill_first_plt_entry):
Implement contents.
(Output_data_plt_aarch64_standard::do_fill_plt_entry): Implement.
(AArch64_howto): New struct.
(aarch64_howto[]): New static const array.
(AArch64_relocate_functions): New class.
(Target_aarch64::Scan::get_reference_flags): Remove method.
(Target_aarch64::Scan::local): Implement to support a few relocations.
(Target_aarch64::Scan::global): Implement to support a few relocations.
(Target_aarch64::make_plt_section): Implement contents.
(Target_aarch64::make_plt_entry): Implement contents.
(Target_aarch64::do_finalize_sections): Implement contents.
(Target_aarch64::Relocate::relocate): Implement a few relocations.
(Target_aarch64::relocate_section): Implement contents.
Alan Modra [Fri, 8 Aug 2014 00:01:19 +0000 (09:31 +0930)]
daily update
Andreas Arnez [Fri, 18 Jul 2014 08:14:27 +0000 (08:14 +0000)]
IA64 Linux: Define regset structures.
Andreas Arnez [Thu, 17 Jul 2014 08:35:43 +0000 (08:35 +0000)]
M68K Linux: Define regset structures.
Andreas Arnez [Wed, 16 Jul 2014 16:50:49 +0000 (16:50 +0000)]
TILEGX Linux: Fill 'collect_regset' in regset structure.
Andreas Arnez [Mon, 21 Jul 2014 15:33:45 +0000 (15:33 +0000)]
SCORE: Fill 'collect_regset' in regset structure.
Also rewrite the 'supply_regset' method, making it platform
independent. To avoid code duplication, move the logic for both to a
register map in regcache_map_entry format.
Andreas Arnez [Tue, 1 Apr 2014 07:08:11 +0000 (07:08 +0000)]
NIOS2 Linux: Fill 'collect_regset' in regset structure.
Andreas Arnez [Tue, 1 Apr 2014 07:06:59 +0000 (07:06 +0000)]
M32R Linux: Fill 'collect_regset' in regset structure.
Andreas Arnez [Tue, 1 Apr 2014 07:04:53 +0000 (07:04 +0000)]
HPPA Linux: Fill 'collect_regset' in regset structures.
Andreas Arnez [Tue, 1 Apr 2014 09:50:32 +0000 (09:50 +0000)]
FRV Linux: Fill 'collect_regset' in regset structures.
Andreas Arnez [Tue, 1 Apr 2014 06:57:34 +0000 (06:57 +0000)]
ALPHA Linux: Fill 'collect_regset' in regset structures.
Andreas Arnez [Tue, 1 Apr 2014 09:42:46 +0000 (09:42 +0000)]
AARCH64 Linux: Fill 'collect_regset' in regset structures.
In order to provide 'collect_regset' support, the generic function
regcache_collect_regset is exploited. Since this requires writing
appropriate register maps, these can be used for supply_regset as
well.
Andreas Arnez [Tue, 15 Jul 2014 11:18:35 +0000 (11:18 +0000)]
S390: Migrate to regcache_supply/collect_regset.
Rather than supplying own supply/collect functions, use the generic
functions regcache_supply_regset and regcache_collect_regset instead.
The register maps are rewritten accordingly and become much shorter
(and better readable) than before.
Andreas Arnez [Tue, 22 Jul 2014 10:28:32 +0000 (10:28 +0000)]
regcache: Add functions suitable for regset_supply/collect.
These functions are intended to suit all targets that don't require too
special logic in their regset supply/collect methods. Having such
generic functions helps reducing target-specific complexity.
Andreas Arnez [Tue, 3 Jun 2014 17:11:35 +0000 (19:11 +0200)]
Rename 'descr' field in regset structure to 'regmap'.
The regset structure's 'descr' field is intended to represent some
kind of "register map". Thus, before making more use of it, this
change renames it to 'regmap' and adjusts the comment appropriately.
(See: https://sourceware.org/ml/gdb-patches/2014-05/msg00664.html)
Yao Qi [Wed, 6 Aug 2014 06:02:35 +0000 (14:02 +0800)]
Replace 0 with TARGET_XFER_EOF in to_xfer_partial
I run splint in gdb source and get the following warnings:
../../../git/gdb/corelow.c:740: Return value type int does not match declared type enum target_xfer_status: 0
'TARGET_XFER_EOF' (enum target_xfer_status) is expected to be returned,
but 0 is returned. This patch is to replace 0 with TARGET_XFER_EOF
in the implementations of to_xfer_partial.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
* corelow.c (core_xfer_partial): Replace 0 with TARGET_XFER_EOF.
* remote-m32r-sdi.c (m32r_xfer_memory): Likewise.
* remote.c (remote_read_bytes): Likewise.
Yao Qi [Mon, 4 Aug 2014 06:44:46 +0000 (14:44 +0800)]
Tweak comments in struct dwarf2_per_cu_data
When I read the comments to field 'u' of struct dwarf2_per_cu_data,
I don't think the comments say anything useful. I update it per
my understanding.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (struct dwarf2_per_cu_data) <u>: Tweak comments.
Yao Qi [Wed, 6 Aug 2014 05:27:57 +0000 (13:27 +0800)]
Fix remote/17230
This patch is to fix PR remote/17230, which is a leftover of the
to_xfer_partial interface change. I tried splint and it reprots this
problem like this,
../../../git/gdb/remote-mips.c:2236: Return value type unsigned long long does not match declared type enum target_xfer_status: len
and this problem only exists in remote-mips.c.
gdb:
2014-08-07 Yao Qi <yao@codesourcery.com>
PR remote/17230
* remote-mips.c (mips_xfer_memory): Set *xfered_len and return
TARGET_XFER_OK instead of 0.
Gary Benson [Wed, 30 Jul 2014 12:21:40 +0000 (13:21 +0100)]
Move errno.h to common-defs.h
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
Gary Benson [Tue, 29 Jul 2014 14:06:51 +0000 (15:06 +0100)]
Include string.h in common-defs.h
This commit includes string.h in common-defs.h and removes all other
inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include string.h.
* aarch64-tdep.c: Do not include string.h.
* ada-exp.y: Likewise.
* ada-lang.c: Likewise.
* ada-lex.l: Likewise.
* ada-typeprint.c: Likewise.
* ada-valprint.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alpha-nat.c: Likewise.
* alpha-osf1-tdep.c: Likewise.
* alpha-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-dicos-tdep.c: Likewise.
* amd64-linux-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-sol2-tdep.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-linux-nat.c: Likewise.
* arm-linux-tdep.c: Likewise.
* arm-tdep.c: Likewise.
* arm-wince-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* armnbsd-nat.c: Likewise.
* armnbsd-tdep.c: Likewise.
* armobsd-tdep.c: Likewise.
* avr-tdep.c: Likewise.
* ax-gdb.c: Likewise.
* ax-general.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* breakpoint.c: Likewise.
* build-id.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* c-typeprint.c: Likewise.
* c-valprint.c: Likewise.
* charset.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-cmds.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-interp.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-setshow.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/agent.c: Likewise.
* common/buffer.c: Likewise.
* common/buffer.h: Likewise.
* common/common-utils.c: Likewise.
* common/filestuff.c: Likewise.
* common/filestuff.c: Likewise.
* common/format.c: Likewise.
* common/print-utils.c: Likewise.
* common/rsp-low.c: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* common/xml-utils.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-support.c: Likewise.
* cp-valprint.c: Likewise.
* cris-tdep.c: Likewise.
* d-exp.y: Likewise.
* darwin-nat.c: Likewise.
* dbxread.c: Likewise.
* dcache.c: Likewise.
* demangle.c: Likewise.
* dicos-tdep.c: Likewise.
* disasm.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* elfread.c: Likewise.
* environ.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* exec.c: Likewise.
* expprint.c: Likewise.
* f-exp.y: Likewise.
* f-lang.c: Likewise.
* f-typeprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findcmd.c: Likewise.
* findvar.c: Likewise.
* fork-child.c: Likewise.
* frame.c: Likewise.
* frv-linux-tdep.c: Likewise.
* frv-tdep.c: Likewise.
* gdb.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v2-abi.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-exp.y: Likewise.
* go-lang.c: Likewise.
* go32-nat.c: Likewise.
* guile/guile.c: Likewise.
* guile/scm-auto-load.c: Likewise.
* hppa-hpux-tdep.c: Likewise.
* hppa-linux-nat.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-cygwin-tdep.c: Likewise.
* i386-dicos-tdep.c: Likewise.
* i386-linux-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-sol2-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-linux-nat.c: Likewise.
* inf-child.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* inflow.c: Likewise.
* infrun.c: Likewise.
* interps.c: Likewise.
* iq2000-tdep.c: Likewise.
* irix5-nat.c: Likewise.
* jv-exp.y: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* jv-valprint.c: Likewise.
* language.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* lm32-tdep.c: Likewise.
* m2-exp.y: Likewise.
* m2-typeprint.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-linux-tdep.c: Likewise.
* m32r-rom.c: Likewise.
* m32r-tdep.c: Likewise.
* m68hc11-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m68klinux-nat.c: Likewise.
* m68klinux-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macrocmd.c: Likewise.
* main.c: Likewise.
* mdebugread.c: Likewise.
* mem-break.c: Likewise.
* memattr.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-cmd-break.c: Likewise.
* mi/mi-cmd-disas.c: Likewise.
* mi/mi-cmd-env.c: Likewise.
* mi/mi-cmd-stack.c: Likewise.
* mi/mi-cmd-var.c: Likewise.
* mi/mi-cmds.c: Likewise.
* mi/mi-console.c: Likewise.
* mi/mi-getopt.c: Likewise.
* mi/mi-interp.c: Likewise.
* mi/mi-main.c: Likewise.
* mi/mi-parse.c: Likewise.
* microblaze-rom.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* minidebug.c: Likewise.
* minsyms.c: Likewise.
* mips-irix-tdep.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mipsread.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* monitor.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-procfs.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/linux-waitpid.c: Likewise.
* nbsd-tdep.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nto-procfs.c: Likewise.
* nto-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* osdata.c: Likewise.
* p-exp.y: Likewise.
* p-lang.c: Likewise.
* p-typeprint.c: Likewise.
* parse.c: Likewise.
* posix-hdep.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* python/py-auto-load.c: Likewise.
* python/py-gdb-readline.c: Likewise.
* ravenscar-thread.c: Likewise.
* regcache.c: Likewise.
* registry.c: Likewise.
* remote-fileio.c: Likewise.
* remote-m32r-sdi.c: Likewise.
* remote-mips.c: Likewise.
* remote-notif.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* reverse.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-go32.c: Likewise.
* ser-mingw.c: Likewise.
* ser-pipe.c: Likewise.
* ser-tcp.c: Likewise.
* ser-unix.c: Likewise.
* serial.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* shnbsd-tdep.c: Likewise.
* skip.c: Likewise.
* sol-thread.c: Likewise.
* solib-dsbt.c: Likewise.
* solib-frv.c: Likewise.
* solib-osf.c: Likewise.
* solib-som.c: Likewise.
* solib-spu.c: Likewise.
* solib-target.c: Likewise.
* solib.c: Likewise.
* somread.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* spu-linux-nat.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* std-regs.c: Likewise.
* symfile.c: Likewise.
* symmisc.c: Likewise.
* symtab.c: Likewise.
* target.c: Likewise.
* thread.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tracepoint.c: Likewise.
* tui/tui-command.c: Likewise.
* tui/tui-data.c: Likewise.
* tui/tui-disasm.c: Likewise.
* tui/tui-file.c: Likewise.
* tui/tui-layout.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-regs.c: Likewise.
* tui/tui-source.c: Likewise.
* tui/tui-stack.c: Likewise.
* tui/tui-win.c: Likewise.
* tui/tui-windata.c: Likewise.
* tui/tui-winsource.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valarith.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-tdep.c: Likewise.
* vaxnbsd-tdep.c: Likewise.
* vaxobsd-tdep.c: Likewise.
* windows-nat.c: Likewise.
* xcoffread.c: Likewise.
* xml-support.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include string.h.
* event-loop.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
Gary Benson [Tue, 29 Jul 2014 13:47:21 +0000 (14:47 +0100)]
Include gdb_assert.h in common-defs.h
This commit includes gdb_assert.h in common-defs.h and removes all
other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_assert.h.
* aarch64-tdep.c: Do not include gdb_assert.h.
* addrmap.c: Likewise.
* aix-thread.c: Likewise.
* alpha-linux-tdep.c: Likewise.
* alpha-mdebug-tdep.c: Likewise.
* alphanbsd-tdep.c: Likewise.
* amd64-nat.c: Likewise.
* amd64-tdep.c: Likewise.
* amd64bsd-nat.c: Likewise.
* amd64fbsd-nat.c: Likewise.
* amd64fbsd-tdep.c: Likewise.
* amd64nbsd-nat.c: Likewise.
* amd64nbsd-tdep.c: Likewise.
* amd64obsd-nat.c: Likewise.
* amd64obsd-tdep.c: Likewise.
* arch-utils.c: Likewise.
* arm-tdep.c: Likewise.
* armbsd-tdep.c: Likewise.
* auxv.c: Likewise.
* bcache.c: Likewise.
* bfin-tdep.c: Likewise.
* blockframe.c: Likewise.
* breakpoint.c: Likewise.
* bsd-kvm.c: Likewise.
* bsd-uthread.c: Likewise.
* buildsym.c: Likewise.
* c-exp.y: Likewise.
* c-lang.c: Likewise.
* charset.c: Likewise.
* cleanups.c: Likewise.
* cli-out.c: Likewise.
* cli/cli-decode.c: Likewise.
* cli/cli-dump.c: Likewise.
* cli/cli-logging.c: Likewise.
* cli/cli-script.c: Likewise.
* cli/cli-utils.c: Likewise.
* coffread.c: Likewise.
* common/common-utils.c: Likewise.
* common/queue.h: Likewise.
* common/signals.c: Likewise.
* common/vec.h: Likewise.
* complaints.c: Likewise.
* completer.c: Likewise.
* corelow.c: Likewise.
* cp-abi.c: Likewise.
* cp-name-parser.y: Likewise.
* cp-namespace.c: Likewise.
* cp-support.c: Likewise.
* cris-tdep.c: Likewise.
* dbxread.c: Likewise.
* dictionary.c: Likewise.
* doublest.c: Likewise.
* dsrec.c: Likewise.
* dummy-frame.c: Likewise.
* dwarf2-frame-tailcall.c: Likewise.
* dwarf2-frame.c: Likewise.
* dwarf2expr.c: Likewise.
* dwarf2loc.c: Likewise.
* dwarf2read.c: Likewise.
* eval.c: Likewise.
* event-loop.c: Likewise.
* exceptions.c: Likewise.
* expprint.c: Likewise.
* f-valprint.c: Likewise.
* fbsd-nat.c: Likewise.
* findvar.c: Likewise.
* frame-unwind.c: Likewise.
* frame.c: Likewise.
* frv-tdep.c: Likewise.
* gcore.c: Likewise.
* gdb-dlfcn.c: Likewise.
* gdb_bfd.c: Likewise.
* gdbarch.c: Likewise.
* gdbarch.sh: Likewise.
* gdbtypes.c: Likewise.
* gnu-nat.c: Likewise.
* gnu-v3-abi.c: Likewise.
* go-lang.c: Likewise.
* guile/scm-exception.c: Likewise.
* guile/scm-gsmob.c: Likewise.
* guile/scm-lazy-string.c: Likewise.
* guile/scm-math.c: Likewise.
* guile/scm-pretty-print.c: Likewise.
* guile/scm-safe-call.c: Likewise.
* guile/scm-utils.c: Likewise.
* guile/scm-value.c: Likewise.
* h8300-tdep.c: Likewise.
* hppa-hpux-nat.c: Likewise.
* hppa-tdep.c: Likewise.
* hppanbsd-tdep.c: Likewise.
* hppaobsd-tdep.c: Likewise.
* i386-darwin-nat.c: Likewise.
* i386-darwin-tdep.c: Likewise.
* i386-nto-tdep.c: Likewise.
* i386-tdep.c: Likewise.
* i386bsd-nat.c: Likewise.
* i386fbsd-tdep.c: Likewise.
* i386gnu-nat.c: Likewise.
* i386nbsd-tdep.c: Likewise.
* i386obsd-tdep.c: Likewise.
* i387-tdep.c: Likewise.
* ia64-libunwind-tdep.c: Likewise.
* ia64-tdep.c: Likewise.
* inf-ptrace.c: Likewise.
* inf-ttrace.c: Likewise.
* infcall.c: Likewise.
* infcmd.c: Likewise.
* infrun.c: Likewise.
* inline-frame.c: Likewise.
* interps.c: Likewise.
* jv-lang.c: Likewise.
* jv-typeprint.c: Likewise.
* linux-fork.c: Likewise.
* linux-nat.c: Likewise.
* linux-thread-db.c: Likewise.
* m32c-tdep.c: Likewise.
* m32r-linux-nat.c: Likewise.
* m32r-tdep.c: Likewise.
* m68k-tdep.c: Likewise.
* m68kbsd-nat.c: Likewise.
* m68kbsd-tdep.c: Likewise.
* m88k-tdep.c: Likewise.
* machoread.c: Likewise.
* macroexp.c: Likewise.
* macrotab.c: Likewise.
* maint.c: Likewise.
* mdebugread.c: Likewise.
* memory-map.c: Likewise.
* mep-tdep.c: Likewise.
* mi/mi-common.c: Likewise.
* microblaze-tdep.c: Likewise.
* mingw-hdep.c: Likewise.
* mips-linux-nat.c: Likewise.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
* mips64obsd-tdep.c: Likewise.
* mipsnbsd-tdep.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* mn10300-tdep.c: Likewise.
* moxie-tdep.c: Likewise.
* mt-tdep.c: Likewise.
* nat/linux-btrace.c: Likewise.
* nat/linux-osdata.c: Likewise.
* nat/linux-ptrace.c: Likewise.
* nat/mips-linux-watch.c: Likewise.
* nios2-linux-tdep.c: Likewise.
* nios2-tdep.c: Likewise.
* objc-lang.c: Likewise.
* objfiles.c: Likewise.
* obsd-nat.c: Likewise.
* opencl-lang.c: Likewise.
* osabi.c: Likewise.
* parse.c: Likewise.
* ppc-linux-nat.c: Likewise.
* ppc-sysv-tdep.c: Likewise.
* ppcfbsd-nat.c: Likewise.
* ppcfbsd-tdep.c: Likewise.
* ppcnbsd-nat.c: Likewise.
* ppcnbsd-tdep.c: Likewise.
* ppcobsd-nat.c: Likewise.
* ppcobsd-tdep.c: Likewise.
* printcmd.c: Likewise.
* procfs.c: Likewise.
* prologue-value.c: Likewise.
* psymtab.c: Likewise.
* python/py-lazy-string.c: Likewise.
* python/py-value.c: Likewise.
* regcache.c: Likewise.
* reggroups.c: Likewise.
* registry.c: Likewise.
* remote-sim.c: Likewise.
* remote.c: Likewise.
* rs6000-aix-tdep.c: Likewise.
* rs6000-tdep.c: Likewise.
* s390-linux-tdep.c: Likewise.
* score-tdep.c: Likewise.
* ser-base.c: Likewise.
* ser-mingw.c: Likewise.
* sh-tdep.c: Likewise.
* sh64-tdep.c: Likewise.
* solib-darwin.c: Likewise.
* solib-spu.c: Likewise.
* solib-svr4.c: Likewise.
* source.c: Likewise.
* sparc-nat.c: Likewise.
* sparc-sol2-tdep.c: Likewise.
* sparc-tdep.c: Likewise.
* sparc64-sol2-tdep.c: Likewise.
* sparc64-tdep.c: Likewise.
* sparc64fbsd-tdep.c: Likewise.
* sparc64nbsd-tdep.c: Likewise.
* sparc64obsd-tdep.c: Likewise.
* sparcnbsd-tdep.c: Likewise.
* sparcobsd-tdep.c: Likewise.
* spu-multiarch.c: Likewise.
* spu-tdep.c: Likewise.
* stabsread.c: Likewise.
* stack.c: Likewise.
* symfile.c: Likewise.
* symtab.c: Likewise.
* target-descriptions.c: Likewise.
* target-memory.c: Likewise.
* target.c: Likewise.
* tic6x-linux-tdep.c: Likewise.
* tic6x-tdep.c: Likewise.
* tilegx-linux-nat.c: Likewise.
* tilegx-tdep.c: Likewise.
* top.c: Likewise.
* tramp-frame.c: Likewise.
* tui/tui-out.c: Likewise.
* tui/tui-winsource.c: Likewise.
* ui-out.c: Likewise.
* user-regs.c: Likewise.
* utils.c: Likewise.
* v850-tdep.c: Likewise.
* valops.c: Likewise.
* value.c: Likewise.
* varobj.c: Likewise.
* vax-nat.c: Likewise.
* xml-syscall.c: Likewise.
* xml-tdesc.c: Likewise.
* xstormy16-tdep.c: Likewise.
* xtensa-linux-nat.c: Likewise.
* xtensa-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_assert.h.
Gary Benson [Mon, 28 Jul 2014 13:35:17 +0000 (14:35 +0100)]
Move common-utils.h to common-defs.h
This commit moves the inclusion of common-utils.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include common-utils.h.
* defs.h: Do not include common-utils.h.
* common/gdb_assert.h: Likewise.
* darwin-nat.h: Likewise.
* nat/linux-btrace.c: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include common-utils.h.
Gary Benson [Mon, 28 Jul 2014 13:28:06 +0000 (14:28 +0100)]
Move ptid.h to common-defs.h
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
Gary Benson [Mon, 28 Jul 2014 13:21:31 +0000 (14:21 +0100)]
Move gdb_locale.h to common-defs.h
This commit moves the inclusion of gdb_locale.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_locale.h.
* defs.h: Do not include gdb_locale.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_locale.h.
Gary Benson [Mon, 28 Jul 2014 13:09:12 +0000 (14:09 +0100)]
Move gdb/signals.h to common-defs.h
This commit moves the inclusion of gdb/signals.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb/signals.h.
* defs.h: Do not include gdb/signals.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb/signals.h.
* win32-low.c: Likewise.
Gary Benson [Mon, 28 Jul 2014 13:04:00 +0000 (14:04 +0100)]
Move pathmax.h to common-defs.h
This commit moves the inclusion of pathmax.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include pathmax.h.
* defs.h: Do not include pathmax.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include pathmax.h.
Gary Benson [Mon, 28 Jul 2014 12:52:38 +0000 (13:52 +0100)]
Move libiberty.h to common-defs.h
This commit moves the inclusion of libiberty.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include libiberty.h.
* defs.h: Do not include libiberty.h.
* common/queue.h: Likewise.
* cp-name-parser.y: Likewise.
* mi/mi-cmd-catch.c: Likewise.
* python/python.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include libiberty.h.
* linux-bfin-low.c: Likewise.
Gary Benson [Mon, 28 Jul 2014 11:03:31 +0000 (12:03 +0100)]
Move ansidecl.h to common-defs.h
This commit moves the inclusion of ansidecl.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ansidecl.h.
* defs.h: Do not include ansidecl.h.
* common/buffer.h: Likewise.
* common/common-utils.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ansidecl.h.
Gary Benson [Mon, 28 Jul 2014 12:15:41 +0000 (13:15 +0100)]
Move stddef.h to common-defs.h
This commit moves the inclusion of stddef.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stddef.h.
* defs.h: Do not include stddef.h.
* common/common-utils.h: Likewise.
* amd64fbsd-nat.c: Likewise.
* bcache.c: Likewise.
* charset.c: Likewise.
* common/buffer.h: Likewise.
* common/vec.h: Likewise.
* i386bsd-nat.c: Likewise.
* nat/linux-btrace.h: Likewise.
* ppcfbsd-nat.c: Likewise.
* ppcnbsd-tdep.h: Likewise.
* ppcobsd-nat.c: Likewise.
* ppcobsd-tdep.h: Likewise.
* python/py-gdb-readline.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* linux-x86-low.c: Do not include stddef.h.
* lynx-ppc-low.c: Likewise.
* tracepoint.c: Likewise.
Gary Benson [Mon, 28 Jul 2014 10:32:37 +0000 (11:32 +0100)]
Move stdarg.h to common-defs.h
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
Gary Benson [Fri, 25 Jul 2014 16:35:30 +0000 (17:35 +0100)]
Move stdlib.h to common-defs.h
This commit moves the inclusion of stdlib.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdlib.h.
* defs.h: Do not include stdlib.h.
* addrmap.c: Likewise.
* bcache.c: Likewise.
* common/buffer.c: Likewise.
* common/common-utils.c: Likewise.
* cp-name-parser.y: Likewise.
* go32-nat.c: Likewise.
* mn10300-linux-tdep.c: Likewise.
* nat/linux-osdata.c: Likewise.
* tui/tui.c: Likewise.
* windows-nat.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdlib.h.
* inferiors.c: Likewise.
* linux-low.c: Likewise.
* regcache.c: Likewise.
* spu-low.c: Likewise.
* tracepoint.c: Likewise.
* utils.c: Likewise.
Gary Benson [Fri, 25 Jul 2014 15:29:40 +0000 (16:29 +0100)]
Move stdio.h to common-defs.h
This commit moves the inclusion of stdio.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdio.h.
* defs.h: Do not include stdio.h.
* ada-lang.c: Likewise.
* common/buffer.c: Likewise.
* common/common-utils.c: Likewise.
* cp-name-parser.y: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* proc-api.c: Likewise.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* python/python-internal.h: Likewise.
* target-memory.c: Likewise.
* tui/tui-io.c: Likewise.
* tui/tui.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdio.h.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* wincecompat.c: Likewise.
Chen Gang [Thu, 7 Aug 2014 06:06:36 +0000 (15:36 +0930)]
Ensure coff-ppc local symbols are zero terminated
* coff-ppc.c (coff_ppc_relocate_section): Ensure local symbols are
zero terminated.
H.J. Lu [Thu, 7 Aug 2014 00:23:46 +0000 (09:53 +0930)]
Don't issue a warning for references in LTO IR to warning symbols
bfd/
PR ld/16746
* linker.c (_bfd_generic_link_add_one_symbol): Don't issue a
warning for references in LTO IR to warning symbols.
ld/testsuite/
PR ld/16746
* ld-plugin/lto.exp: Add 4 tests for PR ld/16746.
* ld-plugin/pr16746a.c: New file.
* ld-plugin/pr16746b.c: Likewise.
* ld-plugin/pr16746c.c: Likewise.
* ld-plugin/pr16746d.c: Likewise.
Alan Modra [Thu, 7 Aug 2014 00:44:13 +0000 (10:14 +0930)]
missing changelog for last commit
Alan Modra [Thu, 7 Aug 2014 00:19:32 +0000 (09:49 +0930)]
Merge WARN and CWARN cases in _bfd_generic_link_add_one_symbol
WARN has always been able to be handled by the CWARN case (WARN was
used when the previous symbols was undef, undefweak or common and thus
must be on the undefs list, so the CWARN test passes). So let's merge
those two cases.
* linker.c (WARN, CWARN): Collapse these states to WARN.
(_bfd_generic_link_add_one_symbol): Use old CWARN case for
new WARN.
Alan Modra [Thu, 7 Aug 2014 00:00:51 +0000 (09:30 +0930)]
daily update
Simon Marchi [Fri, 1 Aug 2014 22:09:06 +0000 (18:09 -0400)]
Rename variable with confusing name
I saw this gem of not so legible code in solib-svr4.c (scan_dyntag):
if (dyn_tag == dyntag)
and thought it deserved a small rename.
This just renames variables to be a bit more clear for those who read the
code. I also constified the parameter because, why not. The same was
done in scan_dyntag_auxv as well.
Tested only by rebuilding, since the change was done mechanically.
gdb/Changelog:
2014-08-01 Simon Marchi <simon.marchi@ericsson.com>
* solib-svr4.c (scan_dyntag): Rename dyntag and dyn_tag variables.
(scan_dyntag_auxv): Same.
Ilya Tocar [Fri, 1 Aug 2014 13:58:32 +0000 (17:58 +0400)]
Add -momit_lock_prefix=[no|yes] option
This option serves as a workaround for processors, which fail on lock
prefix.
gas/
* config/tc-i386.c (omit_lock_prefix): New.
(output_insn): Omit lock prefix if omit_lock_prefix is true.
(OPTION_omit_lock_prefix): New.
(md_longopts): Add momit-lock-prefix.
(md_parse_option): Handle momit-lock-prefix.
(md_show_usage): Add momit-lock-prefix=[no|yes].
* doc/c-i386.texi (momit-lock-prefix): Document.
gas/testsuite/
* gas/i386/i386.exp: Run new tests.
* gas/i386/omit-lock-no.d: New.
* gas/i386/omit-lock-yes.d: Ditto.
* gas/i386/omit-lock.s: Ditto.
Alan Modra [Wed, 6 Aug 2014 12:37:04 +0000 (22:07 +0930)]
Modify new gold test to pass on powerpc64le
* testsuite/defsym_test.sh: Allow ppc64le localentry annotation.
Gary Benson [Wed, 6 Aug 2014 12:39:39 +0000 (13:39 +0100)]
Rearrange awkwardly-nested conditionals
gdbserver's init_register_cache has some preprocessor conditionals
awkwardly nested around an if..else block. This commit moves the
conditionals inside the braces to make the code more readable.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* regcache.c (init_register_cache): Move conditionals inside if.
Yao Qi [Wed, 6 Aug 2014 09:26:27 +0000 (17:26 +0800)]
Remove duplicated include file
File x86-linux-nat.h is included twice in amd64-linux-nat.c and
i386-linux-nat.c. This patch is to remove one.
gdb:
2014-08-06 Yao Qi <yao@codesourcery.com>
* amd64-linux-nat.c: Remove duplicated include
"x86-linux-nat.h".
* i386-linux-nat.c: Likewise.
Gary Benson [Wed, 6 Aug 2014 10:50:24 +0000 (11:50 +0100)]
Replace hardwired target-is-async check
This commit replaces a hardwired target-is-async check.
gdb/gdbserver/
2014-08-06 Gary Benson <gbenson@redhat.com>
* linux-low.c (linux_supports_non_stop): Use target_is_async_p.
Alan Modra [Wed, 6 Aug 2014 03:59:38 +0000 (13:29 +0930)]
PR14918, lto always links in libgcc_s.so
PR14918
* plugin.c (plugin_opt_plugin_arg): Drop --pass-through.
Alan Modra [Wed, 6 Aug 2014 03:56:18 +0000 (13:26 +0930)]
Allow lto tests to run with older compilers
* lib/ld-lib.exp (check_lto_fat_available): New.
(check_lto_available): Remove -ffat-lto-objects test.
* ld-plugin/lto.exp: Use [list ] rather than { } to set up list
variables, allowing substition of vars. Set lto_fat and plug_opt
and add to various tests.
Alan Modra [Wed, 6 Aug 2014 03:10:00 +0000 (12:40 +0930)]
Warn for gold on lto objects without plugin
PR 13227
* symtab.cc (Symbol_table::add_from_relobj): Warn on __gnu_lto_slim.
Yao Qi [Wed, 30 Jul 2014 08:50:49 +0000 (16:50 +0800)]
Fix comment in dwarf_decode_lines_1
When I read dwarf_decode_lines_1 comments today, it should be called
"special opcode" rather than "special operand", as said in DWARF spec.
It is obvious to me. I'll push it in if no comments in three days.
gdb:
2014-08-06 Yao Qi <yao@codesourcery.com>
* dwarf2read.c (dwarf_decode_lines_1): Replace "Special
operand" with "Special opcode" in comments.
Alan Modra [Wed, 6 Aug 2014 00:01:04 +0000 (09:31 +0930)]
daily update
Doug Evans [Tue, 5 Aug 2014 16:00:40 +0000 (09:00 -0700)]
Fix outputdots so that it doesn't errantly discard the first line of, e.g.,
CODE_FRAGMENT. Also fix skip_past_newline to not skip past NUL.
* bfd-in2.h: Regenerate.
* libcoff.h: Regenerate.
doc/
* chew.c (skip_past_newline_1): New function.
(outputdots): Call it.
(skip_past_newline): Ditto.
Maciej W. Rozycki [Tue, 5 Aug 2014 15:17:15 +0000 (16:17 +0100)]
MIPS: Fix a .pdr section linker buffer overrun
* elfxx-mips.c (_bfd_mips_elf_discard_info): Set section's
rawsize if changing size.
Gary Benson [Tue, 5 Aug 2014 14:03:36 +0000 (15:03 +0100)]
Remove pointless function initialize_interps
This commit removes the pointless function initialize_interps.
gdb/
2014-08-05 Gary Benson <gbenson@redhat.com>
* interps.c (initialize_interps): Remove prototype.
(interpreter_initialized): Remove static global.
(interp_add): Do not call initialize_interps.
(initialize_interps): Remove function.
Gary Benson [Tue, 5 Aug 2014 12:06:19 +0000 (13:06 +0100)]
Remove spurious va_end in vwarning
This commit removes a spurious va_end in vwarning.
gdb/
2014-08-05 Gary Benson <gbenson@redhat.com>
* utils.c (vwarning): Remove spurious va_end.
Alan Modra [Tue, 5 Aug 2014 01:54:42 +0000 (11:24 +0930)]
Regen ld/Makefile.in
* Makefile.in: Regenerate.
Alan Modra [Tue, 5 Aug 2014 01:54:23 +0000 (11:24 +0930)]
gas/testuite ChangeLog typo
Alan Modra [Tue, 5 Aug 2014 01:53:58 +0000 (11:23 +0930)]
chew.c warning fix
* chew.c (print_stack_level, main): Cast result of pointer
difference to match format string.
Alan Modra [Tue, 5 Aug 2014 01:19:54 +0000 (10:49 +0930)]
Fix PR17226, ld --gc-sections segfaults on sparc-linux
PR ld/17226
* elfxx-sparc.c (_bfd_sparc_elf_gc_sweep_hook): Typo fix.
Alan Modra [Tue, 5 Aug 2014 01:18:47 +0000 (10:48 +0930)]
Fix load of archive element with common def for -u sym
* linker.c (generic_link_check_archive_element): Move handling
of command link -u symbols with a common symbol def to the
code handling non-common symbols so that archive element symbols
are loaded. Use generic_link_add_object_symbols.
Alan Modra [Tue, 5 Aug 2014 01:16:57 +0000 (10:46 +0930)]
Fix LTO vs. COFF archives
Avoid scan of symbols on objects in coff archives since we don't need
to do anything special with common symbols. The scan is quite useless,
and breaks LTO due to slim LTO objects not having symbols available
until after the plugin has claimed them. Instead we can add objects
based on their archive symbol map.
Also, rip out the archive symbol hash table used by the generic
linker. Using a hash breaks one feature of unix archive linking;
The first object file in an archive defining any given symbol should
be the object extracted to satisfy that symbol. What's more a hash
isn't much faster except in pathological cases where object file
ordering causes many scans of the archive. See the comment which I'm
removing from elf_link_add_archive_symbols.
Finally, tidy elflink.c archive handling a little.
PR 13557
* linker.c (struct archive_list, struct archive_hash_entry,
struct archive_hash_table, archive_hash_newfunc,
archive_hash_table_init, archive_hash_lookup, archive_hash_allocate,
archive_hash_table_free): Delete.
(_bfd_generic_link_add_archive_symbols): Add h and name params to
checkfn. Rewrite using a straight-forward scan over archive map.
(generic_link_check_archive_element_no_collect,
generic_link_check_archive_element_collect,
generic_link_check_archive_element): Add h and name params.
* aoutx.h (aout_link_check_archive_element): Likewise.
* pdp11.c (aout_link_check_archive_element): Likewise.
* xcofflink.c (xcoff_link_check_archive_element): Likewise.
* cofflink.c (coff_link_check_archive_element): Likewise. Don't
scan symbols, simply add archive element whenever h is undefined.
(coff_link_check_ar_symbols): Delete.
* ecoff.c (read_ext_syms_and_strs): Delete.
(reread_ext_syms_and_strs): Delete.
(ecoff_link_check_archive_element): Add h and name param. Don't
scan symbols, simply add based on h. Use ecoff_link_add_object_symbols.
* elflink.c (elf_link_is_defined_archive_symbol): Don't test
archive_pass.
(elf_link_add_archive_symbols): Delete "defined" array, merge
functionality into "included". Make "included" a char array. Don't
set or test archive_pass.
* libbfd-in.h (_bfd_generic_link_add_archive_symbols): Update.
* libbfd.h: Regenerate.
Alan Modra [Tue, 5 Aug 2014 01:07:38 +0000 (10:37 +0930)]
Prepare gdb for 64-bit obstacks
* charset.c (convert_between_encodings): Cast result of obstack_base.
* cp-valprint.c (cp_print_value_fields): Use size_t locals.
* hppa-tdep.c (internalize_unwinds): Change "size" parm to size_t.
(read_unwind_info): Use size_t for some locals.
* jit.c (finalize_symtab): Likewise.
* utils.c (hashtab_obstack_allocate): Likewise.
* symmisc.c (print_objfile_statistics): Update format strings.
Alan Modra [Tue, 5 Aug 2014 00:01:09 +0000 (09:31 +0930)]
daily update