package/bitcoin: drop boost program-options

boost program-options is not needed since version 0.17.0 and
https://github.com/bitcoin/bitcoin/commit/f447a0a7079619f0d650084df192781cca9fd826

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 20.2.2

Release notes of this bugfix release::
https://lists.freedesktop.org/archives/mesa-announce/2020-November/000604.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tinyproxy: add hash for license file

Add hash for license file and update indentation (two spaces).

Fixes:
http://autobuild.buildroot.net/results/b07/b07052de34ca24d5c62f6facec2ced5e092d26e2/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/guile: renumber patch

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/guile: disable jit on ARM with gcc < 5

jit is enabled by default since version 3.0.0 on x86-64, i686, ARMv7 and
AArch64 targets however it raises the following build failure on ARM
with gcc 4.8:

jit.c:232:1: error: initializer element is not constant
 static const jit_gpr_t THREAD = JIT_V0;
 ^

This build failure was also reported with ARM on gcc 4.9:
https://www.mail-archive.com/guile-user@gnu.org/msg11497.html

So just disable jit with ARM and gcc < 5

Fixes:
 - http://autobuild.buildroot.org/results/ba051bb00a6cad3cfd5ffeb197de20ea0eaef33e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fbtft: add license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libexif: add security fix for CVE-2020-0452

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libexif: add security fix for CVE-2020-0198

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/davfs2: fix indent

Fix the following check-package warning added by commit
a2b98a6add92e38dbcd4ca9fda25454a38c719e3:

package/davfs2/davfs2.mk:22: expected indent with tabs

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cryptsetup: break circular dependency

Build fails because of the following circular dependency:

cryptsetup -> util-linux -> udev -> systemd -> cryptsetup

which results in the following build failure:

checking uuid/uuid.h usability... no
checking uuid/uuid.h presence... no
checking for uuid/uuid.h... no
configure: error: You need the uuid library.

To break it, apply the same ugly workaround that was applied for
libglib2 until a better solution is found:
https://patchwork.ozlabs.org/project/buildroot/patch/20201101150619.1709959-1-fontaine.fabrice@gmail.com/

Fixes:
 - http://autobuild.buildroot.org/results/a1a020a3e1c2383a030fcd73eae7c0fe5f82b022

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/davfs2: add davfs2 user and group

mount.davfs expects the availability of the user and group davfs2.

Signed-off-by: Sven Klomp <mail@klomp.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lzlib: add license file

Add lzlib.c as the license file and, while at it, update indentation to
two spaces

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/darkhttpd: add license file

Add license file and, while at it, update indentation to two spaces

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6udoo: select host-openssl for the Linux kernel build

Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:

scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
 #include <openssl/bio.h>

Fixes:
 https://gitlab.com/buildroot.org/buildroot/-/jobs/831421064

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/mx6sx_udoo_neo: select host-openssl for the Linux kernel build

Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:

scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
 #include <openssl/bio.h>

Fixes:
 https://gitlab.com/buildroot.org/buildroot/-/jobs/831421063

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freetype: security bump version to 2.10.4

Fixes CVE-2020-15999, https://www.freetype.org/index.html#news

"This is an emergency release, fixing a severe vulnerability in embedded
 PNG bitmap handling [...].

 All users should update immediately."

Removed md5 hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ghostscript: fix build with freetype >= 2.10.3

This patch is needed to fix the build with freetype >= 2.10.3.

https://www.freetype.org/index.html#news
"A warning for distribution maintainers: Version 2.10.3 and later may
 break the build of ghostscript, due to ghostscript's use of a with-
 drawn macro that wasn't intended for external usage."

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kmscube: add license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/rock_pi_n8: use Python 3.x for U-Boot build

New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.

Fixes:
 - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421210

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_pc: use Python 3.x for U-Boot build

New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.

Fixes:
 - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421100

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_zero_plus: use Python 3.x for U-Boot build

New U-Boot versions (such as 2020.10 being used) need Python 3.x for
pylibfdt.

Fixes:
 - https://gitlab.com/buildroot.org/buildroot/-/jobs/831421115

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "Makefile: exclude BR2_DL_DIR from savedefconfig"

Although BR2_DL_DIR is indeed a site-local setting, which does not
actually define the target system, we've had it in the tree for a
long time now, and people have been depending on it for a variety
of use-cases.

Furthermore, BR2_DL_DIR is far from the only such site-local setting,
BR2_CCACHE_DIR springs to mind, and in the less-obvious category, we
can also find BR2_JLEVEL, but also BR2_WGET, BR2_SVN, BR2_GIT et al.
as they may be tweaked to set the timeout, number of retries or so on
to work around stupid proxies. But of course, the most local site-local
setting is probably BR2_PACKAGE_OVERRIDE_FILE, with its default value
being explicitly just 'local.mk'.

Ideally, we would like to have a clear separation between the
configuration that actually defines the target system on one hand,
and the site-local settings that drive and control how the build is
performed, on the other hand. This is by far a much bigger endeavour
than just dropping BR2_DL_DIR from the saved defconfig.

This reverts commit 36edacce9c2c3b90f9bb11a5d2208e8edf7bbe63 (adapted
to keep the fix from 1a7873ec986c817fdd22cc2d9096d9482fee4381).

Closes: #13291
Note: thanks to Thomas; some phrasing above was borrowed from a
discussion with him.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Lance Fredrickson <lancethepants@gmail.com>
Cc: Sven Oliver Moll <buildroot@svol.li>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>

package/libsigrokdecode: fix build with python 3.9

This will fix the following build failure with python 3.9 and
sigrok-cli:

/srv/storage/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mips64el-buildroot-linux-uclibc/5.5.0/../../../../mips64el-buildroot-linux-uclibc/bin/ld: /srv/storage/autobuild/run/instance-1/output-1/host/bin/../mips64el-buildroot-linux-uclibc/sysroot/usr/lib/libsigrokdecode.so: undefined reference to `PyList_Insert'

Fixes:
 - http://autobuild.buildroot.org/results/cc6447b926f8223c68d0086428d29a037b18252d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openntpd: fix build with gcc 10

Fixes:
 - http://autobuild.buildroot.org/results/4a7e6b707d061f5f7f5e00f0054f02a0f7fcb452

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing/tests: fix flake8 warnings

Fixes the following flake8 warnings:

support/testing/tests/core/test_selinux.py:21:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:38:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:51:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:62:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:65:14: E127 continuation line over-indented for visual indent
support/testing/tests/init/test_systemd_selinux.py:53:1: E302 expected 2 blank lines, found 1
support/testing/tests/init/test_systemd_selinux.py:64:1: E302 expected 2 blank lines, found 1

Interestingly, the "continuation line over-indented for visual indent"
shows up only once, while the same pattern is there at multiple places
in the file. We fix all places with that over-indentation pattern.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jsoncpp: security bump version to 1.9.4

Release notes of this "Security and build system fixes" release:
https://github.com/open-source-parsers/jsoncpp/releases/tag/1.9.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/modem-manager: fix build without xsltproc

Commit 8efb52c1a17210dc79cfb61f56a71ffb760ccbe9 added a libxslt
dependency presumably to manage
https://github.com/freedesktop/ModemManager/commit/bbd39a457ce2949dd167f9c2e01eecf6a9e14716

However, this is wrong and build will fail on:

checking for xsltproc... no
configure: error: Please install xsltproc before configuring.

xsltproc is used to generate ModemManager-names.h since, at least,
version 0.7.990 and
https://github.com/freedesktop/ModemManager/commit/365b906a3e1bda05af10f92451a6b6ae60f8b879
However, this file is already available in the official tarball so drop
this unneeded dependency and set ac_cv_prog_XSLTPROC_CHECK to yes

Fixes:
 - http://autobuild.buildroot.org/results/edc755b874ea43d1c009ad76c28f05e18519138e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/oniguruma: security bump to version 6.9.6

Drop patch (already in version)

Fixed many problems found by OSS-Fuzz
Fixed many problems found by Coverity

https://github.com/kkos/oniguruma/releases/tag/v6.9.6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: Update for 2020.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/feh: bump to version 3.5

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/asterisk: disable spandsp

asterisk fails to build with spandsp since commit 36c983bfa543de89a
(package/spandsp: bump version to 3.0.0), so disable it.

Fixes:
 - http://autobuild.buildroot.org/results/c984738cad4186edb12a62b8e74115e68efe35f0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/modem-manager: bump to version 1.14.6

NOTE: this version requires mbim: >= 1.24.0, qmi: >= 1.26.0.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-remi: downgrade to 2020.8.6 and move to pypi

Since
https://github.com/dddomodossola/remi/commit/481ee7ca3df55be127db35560978a36997a2c088

remi use setuptools-scm to obtain version, but .git directory is dropped when
the archive is fetched. The result is a build failure like:

Traceback (most recent call last):
  File "setup.py", line 22, in <module>
    include_package_data=True,
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools/__init__.py", line 145, in setup
    return distutils.core.setup(**attrs)
  File "/tmp/instance-0/output-1/host/lib/python2.7/distutils/core.py", line 111, in setup
    _setup_distribution = dist = klass(attrs)
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools/dist.py", line 448, in __init__
    k: v for k, v in attrs.items()
  File "/tmp/instance-0/output-1/host/lib/python2.7/distutils/dist.py", line 287, in __init__
    self.finalize_options()
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools/dist.py", line 740, in finalize_options
    ep.load()(self)
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools/dist.py", line 747, in _finalize_setup_keywords
    ep.load()(self, ep.name, value)
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools_scm/integration.py", line 17, in version_keyword
    dist.metadata.version = _get_version(config)
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools_scm/__init__.py", line 147, in _get_version
    parsed_version = _do_parse(config)
  File "/tmp/instance-0/output-1/host/lib/python2.7/site-packages/setuptools_scm/__init__.py", line 118, in _do_parse
    "use git+https://github.com/user/proj.git#egg=proj" % config.absolute_root
LookupError: setuptools-scm was unable to detect version for u'/tmp/instance-0/output-1/build/python-remi-2020.10.30'.

Make sure you're either building from a fully intact git repository or PyPI tarballs. Most other sources (such as GitHub's tarballs, a git checkout without the .git folder) don't contain the necessary metadata and will not work.

For example, if you're using pip, instead of https://github.com/user/proj/archive/master.zip use git+https://github.com/user/proj.git#egg=proj
make: *** [package/pkg-generic.mk:250: /tmp/instance-0/output-1/build/python-remi-2020.10.30/.stamp_built] Error 1
make: Leaving directory '/tmp/instance-0/buildroot'

Fix:
- http://autobuild.buildroot.net/results/3a6/3a62359d0e183d45e50e999fc2c58f7805bda142/

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Peter: drop _LICENSE_FILES, tarball does not include LICENSE file]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gstreamer1/gst1-plugins-bad: fix typo

dvdsub{enc,overlay} -> dvbsub{enc,overlay}

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/collectd: fix grpc dependency

Commit e98610f039b88a5d164b19343d5ecef2d1c01f6d forgot to propagate
libabseil-cpp dependencies to BR2_PACKAGE_COLLECTD_GRPC

Fixes:
 - http://autobuild.buildroot.org/results/c9bacfb52ae46ab78a5f9097a8df83e10d23ccc4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/grpc: add host gcc >= 4.9 comment

Commit e98610f039b88a5d164b19343d5ecef2d1c01f6d forgot to update comment

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libinput: bump version to 1.16.3

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2020-November/041644.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board: add Orangepi Zero Plus support

Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot

This patch is based on Orangepi Zero Plus2 board support, so genimage
configuration and description is copy pasted. One difference is that
newer Linux and U-Boot are selected. Another difference is Ethernet
support (Plus) instead of WiFi (Plus2).

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/opencv3: fix OPENCV3_CLEAN_INSTALL_{DOC, CMAKE}

opencv3 does not install anything in $(TARGET_DIR)/usr/share/OpenCV/doc
so drop OPENCV3_CLEAN_INSTALL_DOC

However it installs its licence files in
$(TARGET_DIR)/usr/share/licenses/opencv3 so add
OPENCV3_CLEAN_INSTALL_LICENSE

Moreover, the cmake hook does not catch all cmake files and missed the
valgrind files so update OPENCV3_CLEAN_INSTALL_CMAKE and add
OPENCV3_CLEAN_INSTALL_VALGRIND to delete those files:
OpenCVConfig.cmake  OpenCVConfig-version.cmake  OpenCVModules.cmake  OpenCVModules-release.cmake  valgrind_3rdparty.supp  valgrind.supp

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "keepalived: needs headers >= 3.4"

This reverts commit d01b0bbad04b97a5e8e1dd3ac3c1026555f793fb.

Original commit  made restriction for Linux headers < 3.4 which was
related to keepalived version 1.3.5, but it compiles fine now at least
with a toolchain based on 3.2 headers and keepalived 2.0.15 together
with ipset enabled.

Probably it was fixed by this commit:

    https://github.com/acassen/keepalived/commit/5a7f895bb795269f79e6353c6269dfbc0b782281

Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rt-tests: fix build issue for unsupported architectures

Release v1.9 introduced the oslat tool that only builds for supported
architectures (i386, x86_64, PPC64) and leads to a build failure for the
whole suite. An upstream patch changes this build error to a runtime warning.

Fixes:
  - http://autobuild.buildroot.net/results/72322cf7239a91211b0be74c01b55873340763f8

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openvpn: add mbedtls support

mbedtls (former polarssl) support was dropped with commit
3380da69c5ab490e5c51dca0c4389b0da91743d0

Put it back as openvpn supports mbedtls 2.x since version 2.4.0 and
https://github.com/OpenVPN/openvpn/commit/86d8cd6860dfc74cb1a040ff8fe03140ebe7f930

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imlib2: fix md5 and sha1

Commit 23a79ddb45ed150cc36ddd3e16a0b5543b0342ad updated md5 and sha1 for
imlib2_loaders-1.6.1.tar.bz2 instead of imlib2-1.6.1.tar.bz2

Fix this mistake and, while at it, update indentation to two spaces

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/busybox: update licensing info

Busybox is mainly licensed under the GPL-2.0, but the bzip2 part is a
modified copy of the bzip2/libbzip2 project, which comes with its own
license.

Update the licensing information accordingly.

Add the hash for the new license file, and fixup indentation (2 spaces).

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-utils: bump version to 1.2.4

Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.3.2_v1.2.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/alsa-lib: bump version to 1.2.4

Rebased patch 0001, added patch 0002 to fix compile error with uClibc.

Changelog: https://www.alsa-project.org/wiki/Changes_v1.2.3.2_v1.2.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imlib2: Bump to version 1.6.1

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freescale-imx/firmware-imx: custom padding

Some derivatives (such as Variscite imx8mm) expect the (LP)DDR4
training data to be padded to a different length.

eg: https://github.com/varigit/uboot-imx/commit/5f8d814f

This patch makes the padding length configurable.

Signed-off-by: Tibault Damman <tibault.damman@basalte.be>
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/pc/genimage-efi.cfg: align the rootfs to start at 16MB offset from start of the image

For grub-efi we can align the rootfs to start at exactly 16MB from the
beginning of the disk.  This can be done by reducing the vfat partition to
be 32 KB smaller than its 16MB size, just like the offset of the vfat
partition.

Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
[Peter: drop redundant offset/size settings, add comment]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/environment-setup: add cmake alias

In order to simplify the usage of a buildroot toolchain within
the buildroot shell, a "cmake" alias is provided to call cmake
with the correct toolchain file and options.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/environment-setup: add configure alias

In order to simplify the usage of a buildroot toolchain within
the buildroot shell, a "configure" alias is provided to call
./configure with the correct flags.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/environment-setup: new package

Install an helper script to setup a build environment based on
Buildroot. It's useful when a developer wants to use a Buildroot
generated SDK to build an external project.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Maury Anderson <maury.anderson@collins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

systemd: sort SYSTEMD_CONF_OPTS

The meson options were in some semi-sorted order with no logic in it.
Sort them alphabetically instead.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

systemd: clear telinit path

Since we don't enable sysv any support, it makes no sense to set the
path to telinit either.

The path we were setting was anyway wrong: we set a path into
TARGET_DIR, but this path is only used at runtime, on the target, where
TARGET_DIR doesn't exist (it should have been /usr/sbin/telinit).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: add missing path options

If paths are not set, then meson will search the host system for the
binaries (or the target, where those binaries are not yet installed).
So add the missing paths.

Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libcap: bump version to 2.45

This libcap release is now able to build on environments w/o thread support.

- add PTHREADS make arg to allow building without thread support
- add SHARED make arg (replace of DYNAMIC)
- remove patch that function is now in upstream (SHARED)

Fixes:
http://autobuild.buildroot.net/results/fc1e7573327c7412dfa45b45a96966d993c7fc86/

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CC: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: Fix libs building on ARC700 with atomics

As we many times by now discussed that - some ARC cores might
not have atomic instructions implemented. Namely that's ARC700
w/o explicitly added atomics during design creation/configuration.

Because of that when GCC gets configured for ARC700, i.e. via
"--with-cpu=arc700" atomic ops are assumed disabled.

Usually it's not a problem as we add "-matomics" in the wraper for
building all packages if targets CPU has atomis (BR2_ARC_ATOMIC_EXT).

But when bulding target's binaries which are essential parts of
the GCC itself we don't use the wrapper. Instead xgcc is being used.
That way we lose that important part of system's configuration about
atomics and:
 1. Atomic ops won't be used where otherwise they could have been used.
 2. Some configuration checks might end-up thinking there're no atomics

In particular (2) leads to pretty obscure failure on bulding of some
packages which use C++, for example:

log4cplus: http://autobuild.buildroot.net/results/a7732fdb2ba526a114d9fb759814236c5332f8d7
------------------------>8--------------------
./.libs/liblog4cplus.so: undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_notify_all(unsigned int*)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------

bitcoin: http://autobuild.buildroot.net/results/f73/f73d4c77e5fd6223abdbc83e344addcfc93227b8
------------------------>8--------------------
(.text+0x110c): undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_wait_until(unsigned int*, unsigned int, bool, std::chrono::duration<long long, std::ratio<1ll, 1ll> >, std::chrono::duration<long long, std::ratio<1ll, 1000000000ll> >)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------

apcupsd: http://autobuild.buildroot.net/results/7a2/7a2cc7a4ac2237c185817f75e55e05d144efd100
------------------------>8--------------------
/tmp/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/9.3.1/../../../../arc-buildroot-linux-uclibc/bin/ld: eh_throw.cc:(.text._ZL23__gxx_exception_cleanup19_Unwind_Reason_CodeP17_Unwind_Exception+0x24): undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------

...and many more.

Interesting enough that was not seen earlier because "-matomic"
used to be added in TARGET_{C|CXX}FLAGS via TARGET_ABI,
but later "-matomic" was moved to ARCH_TOOLCHAIN_WRAPPER_OPTS, see
https://git.buildroot.org/buildroot/commit/?id=c568b4f37fa6d7f51e6d14d33d7eb75dfe26d7bf
and since then we started to see that new breakage which we now
attempt to fix right where it hapens on GCC configuration.

In contrast ARC HS family has atomic ops enabled by default thus
we never spotted that kind of problem for it.

More datails with analysis of what really happens under the hodd and
how do error messages above are related to libs of GCC configuration could
be found here: http://lists.busybox.net/pipermail/buildroot/2020-October/293614.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@gmail.com>
[Peter: simplify conditional]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/optee-client: fix build with gcc 4.8

Fix the following build failure with optee-client 3.11.0 and gcc 4.8:

/home/giuliobenetti/autobuild/run/instance-2/output-1/build/optee-client-3.11.0/libckteec/src/pkcs11_processing.c: In function 'ck_create_object':
/home/giuliobenetti/autobuild/run/instance-2/output-1/build/optee-client-3.11.0/libckteec/src/pkcs11_processing.c:22:9: error: missing initializer for field 'buffer' of 'struct serializer' [-Werror=missing-field-initializers]
  struct serializer obj = { };
         ^

Build failure is raised since version 3.10.0 and
https://github.com/OP-TEE/optee_client/commit/c3279f424348bdd3378d236fd038fdd7bc76e10a
https://github.com/OP-TEE/optee_client/commit/e88c264ba358941d2166b18eeac448e617ffa887
https://github.com/OP-TEE/optee_client/commit/85a7ea7861339356b39c73926f2b5cb9added45b

Fixes:
 - http://autobuild.buildroot.org/results/a3d663adb943aee814180f01d6e153b3309be962

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-remi: bump version to 2020.10.30

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libgit2: bump version to 1.1.0

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgpiod: bump version to 1.4.5

* add a comment about the kernel header dependencies when bumping
versions
* set url to kernel.org as github is unmaintained and outdated
* use two spaces in hash-file

Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/re2: bump version to 2020-11-01

Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gr-osmosdr: bump to version 0.2.2

Drop patch now applied.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wireshark: bump to version 3.4.0

- c-ares is mandatory since
  https://github.com/wireshark/wireshark/commit/451a241e50bd34ba097bd09a5f9f673170779aaf
- Disable ilibc which is available and enabled by default since
  https://github.com/wireshark/wireshark/commit/12a13a69264fdef4281e4b13c8c7d92a272cc99e
- LTO can be enabled since
  https://github.com/wireshark/wireshark/commit/e6b5bd09766a1320c5540f78eb0e4ba03ce8f108
- opus is an optional dependency since
  https://github.com/wireshark/wireshark/commit/6136c719da4ec9b96c01adb4b0fd7f01af171688

https://www.wireshark.org/docs/relnotes/wireshark-3.4.0.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pcre2: fix build on mips r6

Fix build of pcre2 10.35 on mips r6:
https://bugs.exim.org/show_bug.cgi?id=2667

Fixes:
 - http://autobuild.buildroot.org/results/eab208c050867c9bd12bd80dca33cbe0199b0a7d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/grpc: bump version to 1.33.2

Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/open-lldp: bump to version 1.1

- Drop first patch (not needed since
  https://github.com/intel/openlldp/commit/7ae79b0dff53a23fa0a964f77b9e3bb387a293c4)
- Drop second patch (not needed since
  https://github.com/intel/openlldp/commit/dc35fb92dade6ac88a0b96c3395fd77eb94eaf58)
- Drop other patches (already in version)
- systemd is an optional dependency since
  https://github.com/intel/openlldp/commit/5a0add7b097e0b35b96a477d56c3bb076c475b03

https://github.com/intel/openlldp/releases/tag/v1.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zeromq: add libbsd optional dependency

libbsd is an optional dependency which is enabled by default since
version 4.3.3 and
https://github.com/zeromq/libzmq/commit/068385c951c0608edec6264d55ba9c4c923acccc

Fixes:
 - http://autobuild.buildroot.org/results/51220b1b82774e8f6f6ed8593c58d2e3c31a1531

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libqmi: bump to version 1.26.6

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gqrx: bump version to 2.13.2

Drop patch now applied.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: update ARC tools to arc-2020.09-release

This commit bumps ARC toolchain to arc-2020.09-release.

ARC GNU tools of version arc-2020.09-release bring some quite significant
changes like:
* Binutils 2.34.50 with additional ARC patches
* GCC 10.0.2 with additional ARC patches
* GDB 10.0.50 with additional ARC patches

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/collectd: add comment about ssl support in rabbitmq-c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dropbear: bump to version 2020.81

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mesa3d-headers: fix legal-info

Commit 9d874c9051cf46ef29b763ad8db0b638f3761605 forgot to update
MESA3D_HEADERS_LICENSE_FILES

Fixes:
 - http://autobuild.buildroot.org/results/d75e90863525d4abd3d83f3f947261695a2f0d65

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/azure-iot-sdk-c: needs wchar

wchar is needed since version LTS_07_2020_Ref01 which bumped internal
umock with
https://github.com/Azure/azure-iot-sdk-c/commit/8a27860452ec7345bce84d6690b0e8d167b7560a

Indeed umock unconditionally depends on wchar since
https://github.com/Azure/umock-c/commit/6b8e0160defb23ec4fde159ba6389cf61e352a0b

Fixes:
 - http://autobuild.buildroot.org/results/ad7ecd00d8f55c7cae5886c38c097ff0d071a962

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libass: security bump to version 0.15

- harfbuzz is mandatory since
  https://github.com/libass/libass/commit/f3e2c97e1818598afb0b1c7010003ffe4823ff21
- Fix CVE-2020-26682 (In libass 0.14.0, the `ass_outline_construct`'s
  call to `outline_stroke` causes a signed integer overflow.) through
  https://github.com/libass/libass/commit/676f9dc5b52ef406c5527bdadbcb947f11392929
  which does not apply cleanly over version 0.14.
  It should be noted that version 0.15 also fixes other integer
  overflows (which have no CVE assigned)
- Update indentation in hash file (two spaces)

https://github.com/libass/libass/releases/tag/0.15.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wireshark: add zstd optional dependency

zstd is available since version 3.1.1 and is enabled by default:
https://github.com/wireshark/wireshark/commit/ad94c4d459d243c0cbbb9b222d5f7cdf8189ab86

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libglib2: fix util-linux-libs dependency

Commit 2acaa86ce630f616b12aa92493e0269421c5bc97 replaced util-linux by
util-linux-libs but this raises the following build failure:

Makefile:585: *** util-linux-libs is in the dependency chain of libglib2 that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in.  Stop.

To fix this build failure, use util-linux or util-linux-libs depending
on BR2_PACKAGE_UTIL_LINUX_LIBS

Fixes:
 - http://autobuild.buildroot.org/results/8bf6360a343edd10c73a756ab86cdba727f9ea43

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libglib2: fix util-linux dependency

Replace util-linux dependency by util-linux-libs to break the following
circular dependency:

 util-linux -> udev -> systemd -> polkit -> libglib2 -> util-linux

which will result in the following build failure:

../output-1/build/libglib2-2.64.4/meson.build:1931:2: ERROR: Dependency "mount" not found, tried pkgconfig

This will also raise the following build failure with util-linux:

checking for udev_new in -ludev... no
configure: error: udev selected but libudev not found

Fixes:
 - http://autobuild.buildroot.org/results/d2da9bda4e38b301d11d3baa66ea171e9e087171
 - http://autobuild.buildroot.org/results/520e9f18015fe26f93eb26387524766440e63f23

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/uhd: fix build with ARM without NEON

UHD has two issues with ARM:
1/ NEON_SIMD_ENABLE is always enabled when architecture is ARM. But NEON isn't
   necessarily support in the CPU
2/ when NEON is supported -mfpu=neon must be passed to the compiler (not
   automatically done by UHD)

Fixes:
- http://autobuild.buildroot.net/results/2519bd075b8c021b440677297b32f16b1c3cc3dd/
- http://autobuild.buildroot.net/results/99d9979be4f37c42390c87b1afd4cd33bac07f5e/
- http://autobuild.buildroot.net/results/cabc7a87ee869d6bac7d092c1a4fcfcdac22a96e/

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/opencv: drop package

opencv 2.x has seen no release since July 2018 and all buildroot
packages are already compatible with opencv3 so drop it to ease the
addition of opencv4 which is not fully backward compatible with opencv3
as "a lot of C API from OpenCV 1.x has been removed.":
https://opencv.org/opencv-4-0.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/frr: fix detection of host-python3

Add an upstream patch to fix detection of host-python3 and avoid the
following failure because of missing --embed flag:

configure:22276: checking python interpreter python3
configure:22278: "$PYTHON" -c 'import sys; open("conftest.pyver", "w").write(sys.executable or ""); sys.exit(not (sys.version_info.major == 2 and sys.version_info.minor >= 7))'
configure:22281: $? = 1
configure:22287: "$PYTHON" -c 'import sys; open("conftest.pyver", "w").write(sys.executable or ""); sys.exit(not ((sys.version_info.major == 3 and sys.version_info.minor >= 2) or sys.version_info.major > 3))'
configure:22290: $? = 0
configure:22310: result: /home/buildroot/autobuild/run/instance-1/output-1/host/bin/python3 (python3)
py_abi= py_ldver=3.9 py_ver=3.9 py_bindir=/home/buildroot/autobuild/run/instance-1/output-1/host/bin/
configure:22326: checking whether /home/buildroot/autobuild/run/instance-1/output-1/host/bin/python3.9-config is available
configure:22329: result: yes
configure:22339: checking whether /home/buildroot/autobuild/run/instance-1/output-1/host/bin/python3.9-config provides a working build environment
configure:22376: /usr/bin/gcc -std=gnu11 -o conftest -O2 -I/home/buildroot/autobuild/run/instance-1/output-1/host/include -fno-omit-frame-pointer -funwind-tables -Wall -Wextra -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wundef -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -pthread -I/home/buildroot/autobuild/run/instance-1/output-1/host/include/python3.9 -I/home/buildroot/autobuild/run/instance-1/output-1/host/include/python3.9 -I/home/buildroot/autobuild/run/instance-1/output-1/host/include -L/home/buildroot/autobuild/run/instance-1/output-1/host/lib -Wl,-rpath,/home/buildroot/autobuild/run/instance-1/output-1/host/lib conftest.c    -L/home/buildroot/autobuild/run/instance-1/output-1/host/lib  -lcrypt -lpthread -ldl  -lutil -lm -lm  >&5
/tmp/ccrVSMCb.o: In function `main':
conftest.c:(.text.startup+0x5): undefined reference to `Py_Initialize'

Fixes:
 - http://autobuild.buildroot.org/results/d33293bfb2f8d558efa2d83e5cb71226d3e65c7f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: security bump to version 3.2.8

- Fix CVE-2020-26575: In Wireshark through 3.2.7, the Facebook Zero
  Protocol (aka FBZERO) dissector could enter an infinite loop. This was
  addressed in epan/dissectors/packet-fbzero.c by correcting the
  implementation of offset advancement.
  https://www.wireshark.org/security/wnpa-sec-2020-14.html
- Fix GQUIC dissector crash:
  https://www.wireshark.org/security/wnpa-sec-2020-15.html

https://www.wireshark.org/docs/relnotes/wireshark-3.2.8.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: bump version to 20.2.1

Rebased patch 0002 & 0003, added patch 0004 to fix build error.

Switched license file to license.rst due to upstream commit
https://cgit.freedesktop.org/mesa/mesa/commit/?id=4d066836e3cf307431a74eafcc8a404ce5ccea69
"No modification to the generated results have been done."

Switched true/false configure option values to enabled/disabled due to
upstream commit:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=138c003d22739b0d1e6860ed398dd511a44cde04

Remove "MESA3D_PLATFORMS += drm", this platform is now automatically
selected:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=e00adef34a5ce485e2c9216a268ca05e89a5fc98

Remove "MESA3D_PLATFORMS += surfaceless", this platform is now
automatically selected:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=a38e21d6683aeecb51aea4f933a77c6e7f1a6179

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: re-enable gcc 8.x for PowerPC SPE

The GCC-7.x compiler series was the last to officially support PowerPC
SPE CPUs. Now that GCC-8.x is the default compiler used by Buildroot,
some defconfigs, notably the arcturus_ucp1020_defconfig and
freescale_p1025twr_defconfig ones started to fail building, as they
are PowerPC SPE platforms.

In fact, the GCC-8.x compiler series continues to support PowerPC SPE
CPU cores, but only as an --enable-obsoleted instruction set. This
patch enables the use of GCC-8.x and asserts the required option to
enable the PowerPC SPE instruction set.

This patch passes compilation and run tests with the
arcturus/ppc-ucp1020  board.

This patch should address a noted job failure on GitLab CI
https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732

Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/805461732
Signed-off-by: Michael Durrant <mdurrant@ArcturusNetworks.com>
Signed-off-by: Oleksandr G Zhadan <Oleks@ArcturusNetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: fix imx6 eglfs support with imx-gpu-viv

Last commit fixed eglfs_kms support for i.MX8 platforms that required to
declare imx-gpu-viv as the gbm provider.
However, this broke the eglfs "fbdev" imx6 support as gbm isn't provided
in this case. So limit the gbm option to imx-gpu-viv when wayland
backend is used only.

Fixes: 82fb51d3b5 ("package/qt5/qt5base: allow to use imx-gpu-viv as GBM
provider")

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libraw: needs autoreconf

configure is older than configure.ac in official libraw 0.20.2 tarball:
https://github.com/LibRaw/LibRaw/issues/353

Fixes:
 - http://autobuild.buildroot.org/results/abef2ac14a959093a6391cad28e738558e15ceec

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s390-tools: bump to version 2.15.1

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libuhttpd: bump version to 3.4.2

fix compile fail on riscv64

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sispmctl: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/079f1454121d38a83c49529c0f6cc8ed61fd5abb

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libressl: bump to version 3.2.2

https://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-3.2.2-relnotes.txt

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: add file optional dependency

file is an optional dependency of more binary and is enabled by default
since version 2.36 and
https://github.com/karelzak/util-linux/commit/09070e1a658e70ec203150e4fa5f486b32771858

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ima-evm-utils: bump to version 1.3.2

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lxc: bump to version 4.0.5

https://discuss.linuxcontainers.org/t/lxc-4-0-5-lts-has-been-released/9269

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-test: bump to version 3.11.0

Bump OP-TEE Test package version to OP-TEE release 3.11.0.
Add dependency on BR2_INSTALL_LIBSTDCPP since C++ support is needed
to build some OP-TEE test trusted applications.
Remove local patch files since issues addressed since.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-benchmark: bump to version 3.11.0

Bump OP-TEE Benchmark package version to OP-TEE release 3.11.0.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-examples: bump to version 3.11.0

Bump OP-TEE Exmaples package version to OP-TEE release 3.11.0.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-client: bump to version 3.11.0

Bump OP-TEE Client package version to OP-TEE release 3.11.0.
Remove local patch file since issue addressed since.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/optee-os: bump to version 3.11.0

Bump OP-TEE OS package version to OP-TEE release 3.11.0.

Remove patches since merged in OP-TEE OS 3.11.0

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>