rs6000: Use memory_operand for all simple {l,st}*brx instructions

We run fwprop before combine, very early even in the case of fwprop1;
and fwprop1 will change memory addressing to what it considers cheaper.
After the "common" change, it now changes the indexed store instruction
in the testcase to be to a constant address.  But that is not an
improvement at all: the byte reverse instructions only exist in the
indexed form, so they will not match anymore.

This patch changes the patterns for the byte reverse instructions to
allow plain memory_operand, letting reload fix this up.

PR target/92602
* config/rs6000/rs6000.md (bswap<mode>2_load for HSI): Change the
indexed_or_indirect_operand to be memory_operand.
(bswap<mode>2_store for HSI): Ditto.
(bswapdi2_load): Ditto.
(bswapdi2_store): Ditto.

From-SVN: r278821

Translate header for -fdbg-cnt-list.

2019-11-28  Martin Liska  <mliska@suse.cz>

PR debug/46558
* dbgcnt.c (dbg_cnt_list_all_counters): Mark table
headers for translation.

From-SVN: r278820

Properly use TYPE_MAIN_VARIANT in warn_types_mismatch.

2019-11-28  Martin Liska  <mliska@suse.cz>

PR lto/92609
* ipa-devirt.c (warn_types_mismatch): Use TYPE_MAIN_VARIANT
consistently.
2019-11-28  Martin Liska  <mliska@suse.cz>

PR lto/92609
* g++.dg/lto/pr92609_0.C: New test.
* g++.dg/lto/pr92609_1.C: New test.

From-SVN: r278819

[Darwin, X86, testsuite] Update tests for common section use.

The switch to default of no-common means that we no longer
indirect the accesses to 'xxx' in this test.  Adjust the scan-
assembler tests to reflect this.

gcc/testsuite/ChangeLog:

2019-11-28  Iain Sandoe  <iain@sandoe.co.uk>

* gcc.target/i386/pr32219-2.c: Adjust scan-assembler entries
for revised common default.

From-SVN: r278818

re PR libfortran/90374 (Fortran 2018: Support d0.d, e0.d, es0.d, en0.d, g0.d and ew.d e0 edit descriptors for output)

PR fortran/90374
* io.c (check_format): Allow zero width expoenent with e0.

* io/format.c (parse_format_list): Relax format checking to allow
e0 exponent specifier.

* gfortran.dg/fmt_zero_width.f90: Update test.

From-SVN: r278817

Remove leftover optimize checks.

* ipa-inline.c (want_early_inline_function_p): Remove leftover optimize
checks.

From-SVN: r278816

profile-count.c (profile_count::combine_with_ipa_count): Return uninitialized count if called on ininitialized count.

* profile-count.c (profile_count::combine_with_ipa_count): Return
uninitialized count if called on ininitialized count.

From-SVN: r278815

Prevent inconsistent profiles to be created in inlin_transform

* ipa-inline-transform.c (inline_transform): Scale profile before
redirecting.

From-SVN: r278814

profile-count.h (profile_count::max): Work on profiles of different type.

* profile-count.h (profile_count::max): Work on profiles of different
type.
(profile_count::apply_scale): Be sure that ret is not local or global0
type if num is global.

From-SVN: r278813

cgraph: ifunc resolvers cannot be made local (PR 92697)

2019-11-28  Martin Jambor  <mjambor@suse.cz>

PR ipa/92697
* cgraph.c (cgraph_node_cannot_be_local_p_1): Return true for
ifunc_resolvers.
* symtab.c (symtab_node::dump_base): Dump ifunc_resolver flag.
Removed trailig whitespace.

testsuite/
* g++.dg/ipa/pr92697.C: New.

From-SVN: r278812

Fix previous commit (that included unrelated changes)

This patch fixes profile updates while cloning.  When new clone is produced
its global profile is subtracted from the original function.  If the original
function profile drops to 0 we want to switch from global profiles to global0
profiles which is implemented by combine_with_ipa_count_within.

However this is done on all edges independnetly and it may happen that we end
up combining global and globa0 profiles in one functions which is not a good
idea.

This implements profile_count::combine_with_ipa_count_within which is able
to take into account that the counter is inside function with a given count.

* profile-count.h (profile_count::combine_with_ipa_count_within):
Declare.
* profile-count.c (profile_count::combine_with_ipa_count_within):
New.
* cgraphclones.c (cgraph_edge::clone, cgraph_node::create_clone): Use
it.

From-SVN: r278811

Fix profile adjusments while cloning

This patch fixes profile updates while cloning.  When new clone is produced
its global profile is subtracted from the original function.  If the original
function profile drops to 0 we want to switch from global profiles to global0
profiles which is implemented by combine_with_ipa_count_within.

However this is done on all edges independnetly and it may happen that we end
up combining global and globa0 profiles in one functions which is not a good
idea.

This implements profile_count::combine_with_ipa_count_within which is able
to take into account that the counter is inside function with a given count.

* profile-count.h (profile_count::combine_with_ipa_count_within):
Declare.
* profile-count.c (profile_count::combine_with_ipa_count_within):
New.
* cgraphclones.c (cgraph_edge::clone, cgraph_node::create_clone): Use
it.

From-SVN: r278810

ipa-utils.c (ipa_merge_profiles): Be sure that all type transtions of counters are done same way.

* ipa-utils.c (ipa_merge_profiles): Be sure that all type transtions
of counters are done same way.

From-SVN: r278809

* ipa-cp.c (update_profiling_info): Fix scaling.

From-SVN: r278808

re PR tree-optimization/92645 (Hand written vector code is 450 times slower when compiled with GCC compared to Clang)

2019-11-28  Richard Biener  <rguenther@suse.de>

PR tree-optimization/92645
* tree-inline.c (remap_gimple_stmt): When the return value
is not wanted, elide GIMPLE_RETURN.

* gcc.dg/tree-ssa/inline-12.c: New testcase.

From-SVN: r278807

re PR tree-optimization/92645 (Hand written vector code is 450 times slower when compiled with GCC compared to Clang)

2019-11-28  Richard Biener  <rguenther@suse.de>

PR tree-optimization/92645
* tree-ssa-forwprop.c (get_bit_field_ref_def): Also handle
conversions inside a mode class.  Remove restriction on
preserving the element size.
(simplify_vector_constructor): Deal with the above and for
identity permutes also try using VEC_UNPACK_[FLOAT_]LO_EXPR
and VEC_PACK_TRUNC_EXPR.

* gcc.target/i386/pr92645-4.c: New testcase.

From-SVN: r278806

Must use push insn to pass varargs arguments of DFmode because otherwise the middle-end generates wrong code.

Must use push insn to pass varargs arguments of DFmode because
otherwise the middle-end generates wrong code.
PR target/92055
* config/avr/avr.md (MPUSH) [DF, DC]: Add modes to mode iterator.

From-SVN: r278805

[testsuite][arm] Force use of -mfloat-abi=softfp in asm-flag-4.c

The asm-flag-4.c test forces the generation of Thumb code for armv4t,
which is not supported when using the 'hard' FP ABI. This patch
ensures the test uses -mfloat-abi=softfp safely, to avoid irrelevant
failures.

2019-11-28  Christophe Lyon  <christophe.lyon@linaro.org>

* gcc.target/arm/asm-flag-4.c: Use -mfloat-abi=softfp.

From-SVN: r278804

re PR tree-optimization/92691 (ICE in strlen_dom_walker::before_dom_children at gcc/tree-ssa-strlen.c:5177 since r274933)

PR tree-optimization/92691
* tree-ssa-strlen.c (handle_store): Clarify return value meaning
in function comment.
(strlen_check_and_optimize_call): Likewise.  For handle_printf_call
calls, return !handle_printf_call rather than always returning true.
(check_and_optimize_stmt): Describe return value meaning in function
comment.  Formatting fix.

* gcc.dg/tree-ssa/builtin-snprintf-10.c: New test.

From-SVN: r278803

re PR c++/92695 (P1064R0 - virtual constexpr fails if object taken from array)

PR c++/92695
* decl2.c (mark_used): Don't call note_vague_linkage_fn for pure
virtual functions, even if they are declared inline.

* g++.dg/warn/inline3.C: New test.

From-SVN: r278802

Handle correctly global0 and global counters in profile_count::to_sreal_scale

This patch fixes problem in profile_count::to_sreal_scale.  We our porfile
counters can be function local, global (ipa) or function local but globally 0.
The last is used to hold static estimates for functions executed 0 times in
profile.  Now only one 64bit value is stored and if we compute frequency
of global0 counter in global counter we mix them up and return non-zero value
incorrectly.

I also implemented unit test, but will commit sanity checking separately from
fixes: there are multiple bugs in this area I tracked down.

* profile-count.c (profile_count::to_sreal_scale): Handle correctly
combination of globa0 and global counters..

From-SVN: r278801

[rs6000] Fix PR92566 by checking VECTOR_UNIT_NONE_P

As Segher pointed out in PR92566, we shouldn't offer some vector modes which
aren't supported under current setting.  This patch is to make it check by
VECTOR_UNIT_NONE_P which is initialized as current architecture masks.

2019-11-28  Kewen Lin  <linkw@gcc.gnu.org>

    PR target/92566
    * gcc/config/rs6000/rs6000.c (rs6000_preferred_simd_mode): Check by
    VECTOR_UNIT_NONE_P instead.

From-SVN: r278800

sse.md (avx512f_maskcmp<mode>3): Refine VF to VF_AVX512VL.

* gcc/config/i386/sse.md (avx512f_maskcmp<mode>3):
 Refine VF to VF_AVX512VL.

From-SVN: r278799

Daily bump.

From-SVN: r278794

Reformat movdi_internal64.

2019-11-26  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/rs6000.md (movdi_internal64): Reformat.

From-SVN: r278788

Reformat movsi_internal.

2019-11-27  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/rs6000.md (movsi_internal): Reformat.

From-SVN: r278787

Implement P1814R0, CTAD for alias templates.

This patch implements C++20 class template argument deduction for alias
templates, which works by a moderately arcane transformation of the
deduction guides for the underlying class template.  When implementing it,
it seemed that I could simplify the rules in the draft a bit and get
essentially the same effect; I'll be emailing the committee to that effect
soon.

gcc/cp/
* pt.c (rewrite_tparm_list): Factor out of build_deduction_guide.
(maybe_aggr_guide): Check for copy-init here.
(alias_ctad_tweaks, deduction_guides_for): New.
(ctor_deduction_guides_for): Factor out of do_class_deduction.
(ctad_template_p): New.
* parser.c (cp_parser_simple_type_specifier): Use it.
* constraint.cc (append_constraint): New.
gcc/c-family/
* c-cppbuiltin.c (c_cpp_builtins): Update __cpp_deduction_guides.

From-SVN: r278786

Fix constrained alias template transparency.

A constrained alias template can't be treated as equivalent to its
underlying template/type for much the same reason that an alias template
like void_t can't; we're relying on checking during substitution.

* cxx-pretty-print.c (pp_cxx_unqualified_id): Handle alias
template-id.
* pt.c (complex_alias_template_p): True if constraints.
(get_underlying_template, tsubst): Check alias constraints.
(push_template_decl_real): Set alias constraints here.
* parser.c (cp_parser_alias_declaration): Not here.
* constraint.cc (get_constraints): Take const_tree.

From-SVN: r278785

PR c++/92206 - ICE with typedef to dependent alias.

rsandifo's patch for 92206 demonstrated a problem with the existing checking
for alias template specializations: they were returning false for a typedef
to an alias template specialization.  Which is sometimes what the caller
wants, and sometimes not: Sometimes we're interested in whether the type was
written as an alias template-id, and sometimes whether it represents one.

The testcase illustrates a case that remained wrong with the earlier patch:
if the typedef is itself an alias template specialization, we can't strip an
underlying dependent alias.

* pt.c (dependent_alias_template_spec_p)
(alias_template_specialization_p): Add transparent_typedefs
parameter.
(iterative_hash_template_arg, any_template_parm_r)
(primary_template_specialization_p, tsubst, dependent_type_p_r):
Adjust.
* decl.c (check_elaborated_type_specifier): Adjust.
* error.c (dump_template_bindings, dump_aggr_type): Adjust.

From-SVN: r278784

Do not define DFP builtin functions, if DFP has been disabled.

PR bootstrap/92661
* config/rs6000/rs6000-call.c: (def_builtin): Do not define the
builtin if we don't have an actual type.
(builtin_function_type): If the builtin function uses a DFP type
and decimal float has been disabled, then return NULL_TREE.

From-SVN: r278783

Fix 'libgomp.fortran/target-print-1.f90', 'libgomp.oacc-fortran/print-1.f90' for offload target nvptx

libgomp/
* testsuite/lib/libgomp.exp
(check_effective_target_offload_target_nvptx): New proc.
* testsuite/libgomp.fortran/target-print-1.f90: Use it with
'dg-skip-if'.
* testsuite/libgomp.oacc-fortran/print-1.f90: Likewise.
* testsuite/libgomp.fortran/target-print-1-nvptx.f90: New file.
* testsuite/libgomp.oacc-fortran/print-1-nvptx.f90: Likewise.

From-SVN: r278779

re PR rtl-optimization/92510 (ICE in native_encode_rtx, at simplify-rtx.c:6272)

PR rtl-optimization/92510
* combine.c (gen_lowpart_for_combine): Only transform lowpart subreg
of comparison into a comparison with different mode if both imode and
omode are scalar integral modes.

* gcc.dg/pr92510.c: New test.

From-SVN: r278777

re PR c++/92236 ([concepts] Explain non-satisfaction in static_assert)

2019-11-27  Andrew Sutton  <asutton@lock3software.com>

PR c++/92236
Defer evaluation of concept checks so that static assertions can
emit more detailed diagnostics.

gcc/cp/
* constexpr.c (cxx_eval_call_expression): Handle concept checks.
(cxx_eval_constant_expression): Diagnose misuse of function concepts
as template-id expressions. Follow the usual return path for results.
(cxx_eval_outermost_constant_expr): Avoid calling
cp_get_callee_fndecl_nofold for function concepts.
* constraint.cc (build_function_check): Fully type the concept check
so that we don't ICE in conversions.
* cp-gimplify.c (cp_genericize_r) [CALL_EXPR]: Handle concept checks.
[TEMPLATE_ID_EXPR] Likewise.
* cvt.c (convert_to_void): Always evaluate concept checks so we don't
accidentally ignore them. Substitution during satisfaction can make
a program ill-formed (example in g++.dg/cpp2a/concepts6.C).
* pt.c (tsubst_copy_and_build): [CALL_EXPR]: Don't evaluate concepts.
[TEMPLATE_ID_EXPR]: Likewise.
* semantics.c (finish_call_expr): Don't evaluate concepts.
(finish_id_expression_1): Likewise.
(finish_static_assert): Preserve the original condition so we can
diagnose concept errors when a check returns false.

gcc/testsuite/
* g++.dg/cpp2a/concepts-iconv1.C: Update diagnostics.
* g++.dg/cpp2a/concepts-requires5.C: Likewise.
* g++.dg/cpp2a/concepts6.C: New test.

From-SVN: r278775

re PR c++/92439 ([concepts] trunk crashes on constraint satisfaction failure)

2019-11-27  Andrew Sutton  <asutton@lock3software.com>

PR c++/92439
Improve quality of diagnostics for subexpressions that need parens.

gcc/cp/
* parser.c (cp_parser_requires_clause_opt): Add a flag to indicate
when parsing a requires-clause before lambda parameters, and...
(cp_parser_lambda_declarator_opt): ... use that here ...
(cp_parser_type_parameter): ... and here ...
(cp_parser_late_return_type_opt): ... and here ...
(cp_parser_explicit_template_declaration): ... and here.
(cp_parser_diagnose_ungrouped_constraint_plain): Adjust the message
because this can apply to subexpressions that are not immediately
after a requires-clause.
(cp_parser_diagnose_ungrouped_constraint_rich): Likewise.
(primary_constraint_error): New.
(cp_parser_constraint_requires_parens): New.
(cp_parser_unary_constraint_requires_parens): New.
(cp_parser_constraint_primary_expression): Check for unary expressions
before parsing the primary expression. Also check for binary and
postfix operators after a successful parse of the primary expression.
Force a re-parse if the result would form a lower-precedence string.
(cp_parser_constraint_logical_and_expression): Propagate lambda flag;
move checks for ill-formed constraints into the constraint primary
expression.
(cp_parser_constraint_logical_or_expression): Likewise.
(cp_parser_requires_clause_expression): Propagate lambda flag.

gcc/testsuite/
* g++.dg/cpp2a/concepts-requires20.C: New.

From-SVN: r278774

re PR c++/88395 (ICE: Segmentation fault signal terminated program cc1plus, with -std=c++2a -fconcepts)

2019-11-27  Andrew Sutton  <asutton@lock3software.com>

PR c++/88395
Prevent recursive satisfaction by adding requests to the instantiation
stack.

gcc/cp/
* constraint.cc (satisfy_declaration_constraints): Push tinst levels
around satisfaction.

gcc/testsuite/
* g++.dg/cpp2a/concepts-pr88395.C: New.
* g++.dg/cpp2a/concepts-recursive-sat1.C: New.
* g++.dg/cpp2a/concepts-recursive-sat2.C: New.
* g++.dg/cpp2a/concepts-recursive-sat3.C: New.

From-SVN: r278773

re PR rtl-optimization/90007 (ICE in extract_constrain_insn_cached, at recog.c:2223)

2019-11-27  Vladimir Makarov  <vmakarov@redhat.com>

PR rtl-optimization/90007
* recog.c (constrain_operands): Permit hard registers too for
memory when LRA is used.

2019-11-27  Vladimir Makarov  <vmakarov@redhat.com>

PR rtl-optimization/90007
* gcc.target/i386/pr90007.c: New test.

From-SVN: r278770

Diagnose certain constraint errors as hard errors, but otherwise treat them the same as normal SFINAE-type errors.

2019-11-27  Andrew Sutton  <asutton@lock3software.com>

Diagnose certain constraint errors as hard errors, but otherwise treat
them the same as normal SFINAE-type errors. Also, generally clean up
the satisfaction functions.

gcc/cp/
* constexpr.c (cxx_eval_constant_expression): Use
evaluate_concept_check.
* constraint.cc (normalize_concept_definition): Accept a diagnostic
flag and only cache when not diagnosing errors.
(decl_satisfied_cache): Map to trees instead of bools.
(satisfy_atom): Guarantee a location for the errors, propagate complain
flags to force_rvalue, and emit errors for non-boolean constraints.
(get_normalized_constraints_and_args): New overloads. Factored out of
satisfy_constraint_expression and satisfy_declaration_constraints.
(satisfy_constraint_expression): Propagate diagnostic info to
normalization.
(satisfy_declaration_constraints): New. Factored out of
constraints_satisfied_p.
(constraint_satisfaction_value): New. Calls
satisfy_constraint_expression or satisfy_declaration_constraints.
(constraints_satisfied_p): Call constraint_satisfaction_value.
(evaluate_concept_check): Don't take tsubst_falgs_t. Replay
satisfaction if an error is encountered.
(current_failed_constraint): Moved from pt.c.
(diagnose_constraints): Call constraint_satisfaction_value.
* cp-tree.h: Update declarations.
* pt.c (current_failed_constraint): Moved to constraint.cc.
* semantics.c (finish_id_expression_1): Remove a duplicate case.

gcc/testsuite/
* g++.dg/concepts/pr84330.C: Update diagnostics.
* g++.dg/cpp2a/concepts-requires2.C: Likewise.

From-SVN: r278768

m68k.c (m68k_output_compare_fp): Restore differences between Coldfire and regular m68k.

* config/m68k/m68k.c (m68k_output_compare_fp): Restore differences
between Coldfire and regular m68k.
* config/m68k/m68k.md (cmp1_cf_constraints): Disallow constants.

From-SVN: r278767

target.def (TARGET_VECTORIZE_BUILTIN_CONVERSION): Remove.

2019-11-27  Richard Biener  <rguenther@suse.de>

* target.def (TARGET_VECTORIZE_BUILTIN_CONVERSION): Remove.
* targhooks.c (default_builtin_vectorized_conversion): Likewise.
* targhooks.h (default_builtin_vectorized_conversion): Likewise.
* optabs-tree.c (supportable_convert_operation): Do not call
targetm.vectorize.builtin_conversion.  Remove unused decl parameter.
* optabs-tree.h (supportable_convert_operation): Adjust.
* doc/tm.texi.in (TARGET_VECTORIZE_BUILTIN_CONVERSION): Remove.
* doc/tm.texi: Regenerate.
* tree-ssa-forwprop.c (simplify_vector_constructor): Adjust.
* tree-vect-generic.c (expand_vector_conversion): Likewise.
* tree-vect-stmts.c (vect_gen_widened_results_half): Remove
unused decl parameter and adjust.
(vect_create_vectorized_promotion_stmts): Likewise.
(vectorizable_conversion): Adjust.

From-SVN: r278765

re PR tree-optimization/92690 (vector CTOR optimization performs invalid conversion)

2019-11-27  Richard Biener  <rguenther@suse.de>

PR tree-optimization/92690
* tree-ssa-forwprop.c (simplify_vector_constructor): Avoid
converting elements not originally converted.

* gcc.dg/torture/pr92690.c: New testcase.
* gcc.dg/tree-ssa/forwprop-35.c: Adjust.

From-SVN: r278764

re PR fortran/91944 (ICE in gfc_conv_array_initializer, at fortran/trans-array.c:6156)

PR fortran/91944
* simplify.c (gfc_simplify_spread): Check gfc_init_expr_flag instead
of gfc_current_ns->sym_root->n.sym->attr.flavor == FL_PARAMETER.

* gfortran.dg/spread_size_limit_2.f90: New test.

From-SVN: r278762

PR 92463 - Cleanups due to minimum MPFR version bump to 3.1.0

        PR middle-end/92463
        * configure.ac: Use MPFR_RNDN instead of GMP's MP_RNDN.
        * configure: Regenerate

        gcc/
        PR middle-end/92463
        * builtins.c (do_mpfr_ckconv, do_mpc_ckconv, do_mpfr_remquo,
        do_mpfr_lgamma_r, do_mpc_arg2): Use MPFR_RNDx instead of GMP_RNDx,
        mpfr_rnd_t instead of mp_rnd_t.
        * fold-const-call.c (do_mpfr_ckconv, do_mpfr_arg1, do_mpfr_sincos,
        do_mpfr_arg2, do_mpfr_arg3, do_mpc_arg1, do_mpc_arg2): Likewise.
        * gimple-ssa-sprintf.c (format_floating_max, format_floating):
        Use mpfr_exp_t instead of mp_exp_t.
        * real.c (real_from_string, dconst_e_ptr, dconst_sqrt2_ptr): Use
        MPFR_RNDx instead of GMP_RNDx.
        * realmpfr.c (real_from_mpfr, mpfr_from_real): Use mpfr_rnd_t and
        mpfr_exp_t instead mp_rnd_t and mp_exp_t, respectively.
        * realmpfr.h (real_from_mpfr, mpfr_from_real): Use mpfr_rnd_t instead
        of mp_rnd_t and remove MPFR_RNDx poisoning.
        * ubsan.c (ubsan_instrument_float_cast): MPFR_RNDx instead of GMP_RNDx.

        fortran/
        PR middle-end/92463
        * arith.c (gfc_check_real_range): Replace mp_exp_t by mpfr_exp_t.

From-SVN: r278761

[PATCH] Fix PR91790 by considering different first_stmt_info for realign

As PR91790 exposed, when we have one slp node whose first_stmt_info_for_drptr
is different from first_stmt_info, it's possible that the first_stmt DR isn't
initialized yet before stmt SLP_TREE_SCALAR_STMTS[0] of slp node. So we
shouldn't use first_stmt_info for vect_setup_realignment, instead we can use
the one based on first_stmt_info_for_drptr DR with additional adjustment by
bumping the distance from first_stmt DR.

gcc/ChangeLog

2019-11-27  Kewen Lin  <linkw@gcc.gnu.org>

    PR tree-optimization/91790
    * gcc/tree-vect-stmts.c (vectorizable_load): Use the adjusted DR for
    vect_setup_realignment when first_stmt_info is different from
    first_stmt_info_for_drptr.

From-SVN: r278760

re PR c++/92524 (ICE in short program with constexpr and std::array)

PR c++/92524
* tree.c (replace_placeholders_r): Don't walk constructor elts with
RANGE_EXPR indexes.

* g++.dg/cpp0x/pr92524.C: New test.

From-SVN: r278759

re PR tree-optimization/92645 (Hand written vector code is 450 times slower when compiled with GCC compared to Clang)

2019-11-27  Richard Biener  <rguenther@suse.de>

PR tree-optimization/92645
* tree-ssa-forwprop.c (simplify_vector_constructor): Handle
CTORs with just a subset of the original vectors.

* gcc.target/i386/pr92645-2.c: New testcase.
* gcc.target/i386/pr92645-3.c: Likewise.

From-SVN: r278758

re PR lto/92674 (ICE in gimple_phi_arg, at gimple.h:4406 since r240291)

2019-11-27  Richard Biener  <rguenther@suse.de>

PR middle-end/92674
* tree-inline.c (expand_call_inline): Delay purging EH/abnormal
edges and instead record blocks in bitmap.
(gimple_expand_calls_inline): Adjust.
(fold_marked_statements): Delay EH cleanup until all folding is
done.
(optimize_inline_calls): Do EH/abnormal cleanup for calls after
inlining finished.

From-SVN: r278757

Allow autoinc in jumps, but only when using reload.

* auto-inc-dec.c (merge_in_block): Allow autoinc in jumps unless
LRA is enabled.
* combine.c (can_combine_p): Disallow autoinc in jumps unless LRA is
disabled.

From-SVN: r278756

Remember the location of a variable template-id.

I noticed that tsubst of a TEMPLATE_ID_EXPR was losing the location
information from its EXPR_LOCATION.  Then I noticed that
cxx_eval_constant_expression was also throwing away location information for
variable references.

* pt.c (tsubst_copy_and_build) [TEMPLATE_ID_EXPR]: Remember the
location of a variable template-id.
* constexpr.c (cxx_eval_constant_expression): Get expr location
before stripping location wrappers.
(non_const_var_error): Take location argument.

From-SVN: r278755

re PR debug/92664 (Wrong .debug_line section information when compiling stdin input with -g3)

PR debug/92664
* dwarf2out.c (lookup_filename): Use "<stdin>" instead of "".

From-SVN: r278752

Daily bump.

From-SVN: r278751

typeck.c (cp_build_unary_op): Consistently use the accurate location in seven additional diagnostic messages.

/cp
2019-11-26  Paolo Carlini  <paolo.carlini@oracle.com>

* typeck.c (cp_build_unary_op): Consistently use the accurate
location in seven additional diagnostic messages.
(cp_build_compound_expr): Use cp_expr_loc_or_input_loc in one place.

/testsuite
2019-11-26  Paolo Carlini  <paolo.carlini@oracle.com>

* g++.dg/cpp1z/bool-increment1.C: Test location(s) too.
* g++.dg/expr/bitfield3.C: Likewise.
* g++.dg/expr/bitfield4.C: Likewise.
* g++.dg/expr/bitfield5.C: Likewise.
* g++.dg/expr/bitfield6.C: Likewise.
* g++.dg/expr/bool1.C: Likewise.
* g++.dg/expr/bool2.C: Likewise.
* g++.dg/expr/bool3.C: Likewise.
* g++.dg/expr/bool4.C: Likewise.
* g++.dg/expr/lval3.C: Likewise.
* g++.dg/other/error18.C: Likewise.
* g++.dg/warn/Wpointer-arith-1.C: Likewise.
* g++.old-deja/g++.bugs/900212_01.C: Likewise.
* g++.old-deja/g++.bugs/900428_02.C: Likewise.
* g++.old-deja/g++.jason/rfg14.C: Likewise.
* g++.old-deja/g++.other/overload11.C: Likewise.

From-SVN: r278743

PR tree-optimization/92683 - strncmp incorrect result with equal substrings and non-const bound

gcc/testsuite/ChangeLog:

PR tree-optimization/92683
* gcc.dg/strcmpopt_8.c: New test.
* gcc.dg/strcmpopt_9.c: New test.

gcc/ChangeLog:

PR tree-optimization/92683
* gimple-fold.c (gimple_fold_builtin_string_compare): Restore a test
inadvertently removed in a previous change.  Rename local variable
for clarity.

From-SVN: r278742

Update vect_char_add target selector to use its own cache

This patch updates the vect_char_add target selector to use its own
cache instead of the vect_int cache.

This was causing a situation where bb-slp-40.c would fail on sparc when
run after other tests that use the vect_int target selector, but pass
when run on its own.

2019-11-26  Joel Hutton  <Joel.Hutton@arm.com>

gcc/testsuite/
PR testsuite/92391
* lib/target-supports.exp (check_effective_target_vect_char_add):
Use a separate cache entry from vect_int.

From-SVN: r278738

re PR c++/92648 (Handling of unknown attributes)

PR c++/92648
* parser.c (cp_parser_std_attribute): For unknown attributes,
skip balanced token seq instead of trying to parse
attribute-argument-clause as expression list.  Formatting fix.

* g++.dg/cpp0x/gen-attrs-71.C: New test.

From-SVN: r278737

re PR c++/61414 (enum class bitfield size-checking needs a separate warning flag controlling it)

PR c++/61414
* c-attribs.c (handle_mode_attribute): Add mode attribute to
ENUMERAL_TYPEs.

* class.c (enum_to_min_precision): New hash_map.
(enum_min_precision): New function.
(check_bitfield_decl): Use it.

* g++.dg/cpp0x/enum23.C: Remove xfail.
* g++.dg/cpp0x/enum28.C: New test.

From-SVN: r278736

Insert missed log entry.

From-SVN: r278735

Remove entry committed to wrong log.

From-SVN: r278734

Unbreak objc build – with --enable-maintainer-mode

        * Makefile.in (aclocal_deps): Fix path to cet.m4.

From-SVN: r278732

libstdc++: Use C++98 syntax to instantiate input_iterator_tag

* include/debug/helper_functions.h (__valid_range_aux): Use C++98
std::input_iterator_tag default constructor invocation.

From-SVN: r278731

re PR target/92669 (ICE in pre_and_rev_post_order_compute_fn at gcc/cfganal.c:1034 since r278666)

2019-11-26  Richard Biener  <rguenther@suse.de>

PR middle-end/92669
* cfganal.c (pre_and_rev_post_order_compute_fn): Deal with
NULL pre_order.

From-SVN: r278723

re PR sanitizer/92154 (new glibc breaks arm bootstrap due to libsanitizer)

PR sanitizer/92154
* sanitizer_common/sanitizer_platform_limits_posix.h: Cherry-pick
llvm-project revision 947f9692440836dcb8d88b74b69dd379d85974ce.
* sanitizer_common/sanitizer_platform_limits_posix.cpp: Likewise.

From-SVN: r278722

S/390: Add undef for MUSL_DYNAMIC_LINKERxx

This fixes the s390 bootstrap by undefining existing defines before
redefining them.

gcc/ChangeLog:

2019-11-26  Robin Dapp  <rdapp@linux.ibm.com>

  * config/s390/linux.h: Add undef for MUSL_DYNAMIC_LINKERxx.

From-SVN: r278721

re PR tree-optimization/92644 (ICE in wide_int_to_tree_1, at tree.c:1530)

PR tree-optimization/92644
* tree-ssa-phiopt.c (minmax_replacement): Add INTEGRAL_TYPE_P check
next to INTEGER_CST checks.

* g++.dg/opt/pr92644.C: New test.

From-SVN: r278720

re PR tree-optimization/92645 (Hand written vector code is 450 times slower when compiled with GCC compared to Clang)

2019-11-26  Richard Biener  <rguenther@suse.de>

PR tree-optimization/92645
* tree-vect-slp.c (vect_build_slp_tree_2): For unary ops
do not build the operation from scalars if the operand is.

* gcc.target/i386/pr92645.c: New testcase.

From-SVN: r278719

libstdc++: Add C++20 P1032 constexpr to _GLIBCXX_DEBUG array

* include/debug/array (array<>::fill): Add C++20 constexpr.
(array<>::swap): Likewise.

From-SVN: r278718

libstdc++: Add _GLIBCXX_DEBUG safe iterator C++20 iterator concept

* include/debug/safe_iterator.h
[__cpp_lib_concepts](_Safe_iterator<>::iterator_concept): Define for
C++20.

From-SVN: r278717

Daily bump.

From-SVN: r278716

* gfortran.dg/dec-comparison.f90: Change dg-do from run to compile.

From-SVN: r278713

Fix typo in C++2a paper number - P1920R1 -> P1902R1

From-SVN: r278707

re PR fortran/92629 (internal compiler error: in convert_mpz_to_unsigned, at fortran/simplify.c:173)

2019-11-25  Harald Anlauf  <anlauf@gmx.de>

PR fortran/92629
* simplify.c (convert_mpz_to_unsigned): Skip assert for argument
range when -fno-range-check is specified.

PR fortran/92629
* gfortran.dg/pr92629.f90: New testcase.

From-SVN: r278699

libstdc++: Add move_sentinel, common_iterator and counted_iterator

This implements most of the remaining C++20 additions to the <iterator>
header.

* include/bits/iterator_concepts.h (ranges::iter_swap): Fix parameter
types of poison pill overload. Use remove_reference_t when checking
constraints.
* include/bits/stl_iterator.h (move_sentinel): Define for C++20.
(move_iterator): Adjust definitions of nested types for C++20. Add
hidden friends for move_sentinel operations, iter_move and iter_swap.
(common_iterator, counted_iterator): Define for C++20.
* testsuite/24_iterators/move_iterator/cust.cc: New test.
* testsuite/24_iterators/move_iterator/sentinel.cc: New test.
* testsuite/24_iterators/common_iterator/1.cc: New test.
* testsuite/24_iterators/counted_iterator/1.cc: New test.

From-SVN: r278698

PR libstdc++/91786 fix compilation error with Clang

PR libstdc++/91786
* include/bits/fs_path.h (filesystem_error): Move definition before
the use in u8path.

From-SVN: r278697

config/gcn/mkoffload.c – remove unused static vars

        * config/gcn/mkoffload.c (COMMENT_PREFIX, struct id_map,
        func_ids, funcs_tail, var_ids, vars_tail) Remove unused
        definitions.

From-SVN: r278688

Update dump message in IPA ICF.

2019-11-25  Martin Liska  <mliska@suse.cz>

* ipa-icf.c (sem_item_optimizer::dump_cong_classes): Clean
up used dump message.

From-SVN: r278687

Comment too strict checking assert.

2019-11-25  Martin Liska  <mliska@suse.cz>

PR bootstrap/92653
* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Comment out
too strict checking assert.

From-SVN: r278686

typeck.c (cp_build_indirect_ref_1): Add location_t parameter and use it in error messages.

/gcc
2019-11-25  Paolo Carlini  <paolo.carlini@oracle.com>

* typeck.c (cp_build_indirect_ref_1): Add location_t parameter
and use it in error messages.
(build_x_indirect_ref): Adjust call.
(build_indirect_ref): Likewise.
(cp_build_fold_indirect_ref): Likewise.
(cp_build_array_ref): Likewise.
* call.c (build_new_op_1): Likewise.
* semantics.c (finish_omp_clauses): Likewise.
(finish_omp_depobj): Likewise.
* typeck2.c (build_x_arrow): Likewise.
* cp-tree.h (cp_build_indirect_ref): Update declaration.

* call.c (build_new_op_1): Use location argument in warning_at.

* typeck.c (cp_build_modify_expr): Consistently use the
location_t argument.

/libcc1
2019-11-25  Paolo Carlini  <paolo.carlini@oracle.com>

* libcp1plugin.cc (plugin_pragma_push_user_expression): Update
cp_build_indirect_ref call.

/gcc/testsuite
2019-11-25  Paolo Carlini  <paolo.carlini@oracle.com>

* g++.dg/diagnostic/base-operand-non-pointer-1.C: New.
* g++.dg/pr53055.C: Check location too.
* g++.old-deja/g++.bugs/900213_02.C: Likewise.
* g++.old-deja/g++.bugs/900215_02.C: Likewise.
* g++.old-deja/g++.other/badarrow.C: Likewise.
* g++.old-deja/g++.other/deref1.C: Likewise.

* g++.dg/warn/Wenum-compare.C: Check location too.

* g++.dg/cpp0x/initlist26.C: Check location too.
* g++.dg/cpp0x/initlist28.C: Likewise.
* g++.dg/cpp0x/initlist29.C: Likewise.
* g++.dg/cpp0x/initlist33.C: Likewise.
* g++.dg/expr/string-2.C: Likewise.
* g++.dg/other/ptrmem5.C: Likewise.
* g++.old-deja/g++.benjamin/14664-1.C: Likewise.
* g++.old-deja/g++.benjamin/14664-2.C: Likewise.
* g++.old-deja/g++.brendan/init12.C: Likewise.
* g++.old-deja/g++.bugs/900324_04.C: Likewise.
* g++.old-deja/g++.ext/array1.C: Likewise.
* g++.old-deja/g++.jason/rfg17.C: Likewise.

From-SVN: r278685

Prevent all uses of DFP when unsupported (PR c/91985).

Code that directly uses _Decimal* types on architectures not
supporting DFP is properly diagnosed ("error: decimal floating-point
not supported for this target"), via a call to
targetm.decimal_float_supported_p, if the _Decimal32, _Decimal64 or
_Decimal128 keywords are used to access it.  Use via mode attributes
is also diagnosed ("unable to emulate 'SD'"); so is use of the
FLOAT_CONST_DECIMAL64 pragma.  However, it is possible to access those
types via typeof applied to constants or built-in functions without
such an error.  I expect that there are ways to get an ICE from this;
certainly it uses a completely undefined ABI.

This patch arranges for the types not to exist in the compiler at all
when DFP is not supported.  As is done with unsupported _FloatN /
_FloatNx types, the global tree nodes are left as NULL_TREE, and the
built-in function machinery is made to use error_mark_node for them in
that case in builtin-types.def, so that the built-in functions are
unavailable.  Code handling constants is adjusted to give an error,
and other code that might not work with the global tree nodes being
NULL_TREE is also updated.

Bootstrapped with no regressions for x86_64-pc-linux-gnu.  Also tested
with no regressions for cross to aarch64-linux-gnu, as a configuration
without DFP support.

PR c/91985
gcc:
* builtin-types.def (BT_DFLOAT32, BT_DFLOAT64, BT_DFLOAT128)
(BT_DFLOAT32_PTR, BT_DFLOAT64_PTR, BT_DFLOAT128_PTR): Define to
error_mark_node if corresponding global tree node is NULL.
* tree.c (build_common_tree_nodes): Do not initialize
dfloat32_type_node, dfloat64_type_node or dfloat128_type_node if
decimal floating-point not supported.

gcc/c:
* c-decl.c (finish_declspecs): Use int instead of decimal
floating-point types if decimal floating-point not supported.

gcc/c-family:
* c-common.c (c_common_type_for_mode): Handle decimal
floating-point types being NULL_TREE.
* c-format.c (get_format_for_type_1): Handle specified types being
NULL_TREE.
* c-lex.c (interpret_float): Give an error for decimal
floating-point constants when decimal floating-point not
supported.

gcc/lto:
* lto-lang.c (lto_type_for_mode): Handle decimal floating-point
types being NULL_TREE.

gcc/testsuite:
* gcc.dg/c2x-no-dfp-1.c, gcc.dg/gnu2x-builtins-no-dfp-1.c: New
tests.
* gcc.dg/fltconst-pedantic-dfp.c: Expect errors when decimal
floating-point not supported.

From-SVN: r278684

Properly handle C2x attributes on types.

attribs.c has code to ignore all scoped attributes appertaining to
types except when they are part of the definition of that type.

I think the premise of that code is incorrect, and its presence is a
bug; such attributes are clearly valid in both C and C++, which
explicitly specify that attributes in certain syntactic positions
appertain to a particular type, only for that use of that type and not
for other uses of the same type specifiers without that attribute
specified, and while the standard attributes in C2x aren't relevant in
such contexts, some gnu:: attributes certainly are.  Where some
attributes are invalid on some types in such contexts, that's a matter
for the individual attribute handlers to diagnose (or the front end if
the requirements on a standard attribute in the standard are more
strict than those of a handler shared with a GNU attribute).

Thus, this patch removes the bogus code to allow such attributes to be
used.  Doing so (and adding tests for attributes in such positions)
shows up that the logic in the C front end for creating the
c_declarator structures for such attributes put them in the wrong
place relative to the structures for function and array types, and the
logic for postfix attributes on a list of declaration specifiers
failed to handle some cases, so those bugs are also fixed in this
patch.

Bootstrapped with no regressions for x86_64-pc-linux-gnu.

gcc:
* attribs.c (decl_attributes): Do not ignore C++11 attributes on
types.

gcc/c:
* c-tree.h (struct c_declarator): Use a structure for id member.
* c-decl.c (grokdeclarator): Extract attributes from cdk_id
declarators at the start, not when handling individual declarators
later.  Use u.id.id instead of u.id.
(grokfield): Use u.id.id instead of u.id.
(build_id_declarator): Set u.id.id and u.id.attrs.
(finish_declspecs): Handle postfix attributes in case of typedef
name or typeof used.
* c-parser.c (c_parser_direct_declarator)
(c_parser_direct_declarator_inner): Place declarator for
attributes inside that for function or array, not outside.  Set
u.id.attrs for identifiers.
(c_parser_parameter_declaration): Use u.id.id instead of u.id.
* gimple-parser.c (c_parser_gimple_declaration): Use u.id.id
instead of u.id.

gcc/testsuite:
* gcc.dg/gnu2x-attrs-1.c: Do not expect message about attributes
appertaining to types.
* gcc.dg/gnu2x-attrs-2.c: New test.
* g++.dg/cpp0x/gen-attrs-1.C, g++.dg/cpp0x/gen-attrs-22.C,
g++.dg/cpp0x/gen-attrs-4.C, g++.dg/cpp0x/lambda/lambda-attr1.C:
Update expected diagnostics.

From-SVN: r278683

Convert m68k to not use cc0

* config/m68k/m68k.c (output_move_himode, output_move_qimode):
Replace code for non-CONST_INT constants with gcc_unreachable.
* config/m68k/m68k.md (cbranchdi): Don't generate individual
compare and test.
(CMPMODE): New mode_iterator.
(cbranchsi4, cbranchqi4, cbranchhi4): Replace expanders with
cbranch<mode>4.
(cstoresi4, cstoreqi4, cstorehi4): Replace expanders with
cstore<mode>4.
(cmp<mode>_68881): Remove 'F' constraint from first comparison
operand.
(bit test insns patterns): Use nonimmediate_operand, not
register_operand, for source operands that allow memory in
their constraints.
(divmodsi4, udivmodsi4, divmodhi4 and related unnamed patterns):
Use register_operand, not nonimmediate_operand, for the
destinations.
(DBCC): New mode_iterator.
(dbcc peepholes): Use it to reduce duplication.
(trap): Use const_true_rtx, not const1_rtx.
* config/m68k/predicates.md (m68k_comparison_operand): Renamed
from m68k_subword_comparison_operand and changed to handle
SImode.

PR target/91851
* config/m68k/m68k-protos.h (output-dbcc_and_branch): Adjust
declaration.
(m68k_init_cc): New declaration.
(m68k_output_compare_di, m68k_output_compare_si)
(m68k_output_compare_hi, m68k_output_compare_qi)
(m68k_output_compare_fp, m68k_output_btst, m68k_output_bftst)
(m68k_find_flags_value, m68k_output_scc, m68k_output_scc_float)
(m68k_output_branch_integer, m68k_output_branch_integer_rev.
m68k_output_branch_float, m68k_output_branch_float_rev):
Likewise.
(valid_dbcc_comparison_p_2, flags_in_68881)
(output_btst): Remove declaration.
* config/m68k/m68k.c (INCLDUE_STRING): Define.
(TARGET_ASM_FINAL_POSTSCAN_INSN): Define.
(valid_dbcc_comparison_p_2, flags_in_68881): Delete functions.
(flags_compare_op0, flags_compare_op1, flags_operand1,
flags_operand2, flags_valid): New static variables.
(m68k_find_flags_value, m68k_init_cc): New functions.
(handle_flags_for_move, m68k_asm_final_postscan_insn,
remember_compare_flags): New static functions.
(output_dbcc_and_branch): New argument CODE.  Use it, and add
PLUS and MINUS to the possible codes.  All callers changed.
(m68k_output_btst): Renamed from output_btst.  Remove OPERANDS
and INSN arguments, add CODE arg.  Return the comparison code
to use.  All callers changed.  Use CODE instead of
next_insn_tests_no_inequality, and replace cc_status management
with changing the return code.
(m68k_rtx_costs): Instead of testing for COMPARE, test for
RTX_COMPARE or RTX_COMM_COMPARE.
(output_move_simode, output_move_qimode): Call
handle_flags_for_move.
(notice_update_cc): Delete function.
(m68k_output_bftst, m68k_output_compare_di, m68k_output_compare_si,
m68k_output_compare_hi, m68k_output_compare_qi,
m68k_output_compare_fp, m68k_output_branch_integer,
m68k_output_branch_integer_rev, m68k_output_scc,
m68k_output_branch_float, m68k_output_branch_float_rev,
m68k_output_scc_float): New functions.
(output_andsi3, output_iorsi3, output_xorsi3): Call CC_STATUS_INIT
once at the start, and set flags_valid and flags_operand1 if the
flags are usable.
* config/m68k/m68k.h (CC_IN_68881, NOTICE_UPDATE_CC,
CC_OVERFLOW_UNUSABLE, CC_NO_CARRY, OUTPUT_JUMP): Remove
definitions.
(CC_STATUS_INIT): Define.
* config/m68k/m68k.md (flags_valid): New define_attr.
(tstdi, tstsi_internal_68020_cf, tstsi_internal, tsthi_internal,
tstqi_internal, tst<mode>_68881, tst<mode>_cf, cmpdi_internal,
cmpdi, unnamed cmpsi/cmphi/cmpqi patterns, cmpsi_cf,
cmp<mode>_68881, cmp<mode>_cf, unnamed btst patterns,
tst_bftst_reg, tst_bftst_reg, unnamed scc patterns, scc,
sls, sordered_1, sunordered_1, suneq_1, sunge_1, sungt_1,
sunle_1, sunlt_1, sltgt_1, fsogt_1, fsoge_1, fsolt_1, fsole_1,
bge0_di, blt0_di, beq, bne, bgt, bgtu, blt, bltu, bge, bgeu,
ble, bleu, bordered, bunordered, buneq, bunge, bungt, bunle,
bunlt, bltgt, beq_rev, bne_rev, bgt_rev, bgtu_rev,
blt_rev, bltu_rev, bge_rev, bgeu_rev, ble_rev, bleu_rev,
bordered_rev, bunordered_rev, buneq_rev, bunge_rv, bungt_rev,
bunle_rev, bunlt_rev, bltgt_rev, ctrapdi4, ctrapsi4, ctraphi4,
ctrapqi4, conditional_trap): Delete patterns.
(cbranchdi4_insn): New pattern.
(cbranchdi4): Don't generate cc0 patterns.  When testing LT or GE,
test high part only.  When testing EQ or NE, generate beq0_di
and bne0_di patterns directly.
(cstoredi4): When testing LT or GE, test high part only.
(both sets of cbranch<mode>4, cstore<mode>4): Don't generate cc0
patterns.
(scc0_constraints, cmp1_constraints, cmp2_constraints,
scc0_cf_constraints, cmp1_cf_constraints, cmp2_cf_constraints,
cmp2_cf_predicate): New define_mode_attrs.
(cbranch<mode>4_insn, cbranch<mode>4_insn_rev,
cbranch<mode>4_insn_cf, cbranch<mode>4_insn_cf_rev,
cstore<mode>4_insn, cstore<mode>4_insn_cf for integer modes)
New patterns.
(cbranch<mode>4_insn_68881, cbranch<mode>4_insn_rev_68881):
(cbranch<mode>4_insn_cf, cbranch<mode>4_insn_rev_cf,
cstore<mode>4_insn_68881, cstore<mode>4_insn_cf for FP):
New patterns.
(cbranchsi4_btst_mem_insn, cbranchsi4_btst_reg_insn,
cbranchsi4_btst_mem_insn_1, cbranchsi4_btst_reg_insn_1):
Likewise.
(BTST): New define_mode_iterator.
(btst_predicate, btst_constraint, btst_range): New
define_mode_attrs.
(cbranch_bftst<mode>_insn, cstore_bftst<mode>_insn): New
patterns.
(movsi_m68k_movsi_m68k2, movsi_cf, unnamed movstrict patterns,
unnamed movhi and movqi patterns, unnamed movsf, movdf and movxf
patterns): Set attr "flags_valid".
(truncsiqi2, trunchiqi2, truncsihi2): Remove manual CC_STATUS
management.  Set attr "flags_valid".
(extendsidi2, extendplussidi, unnamed float_extendsfdf pattern,
extendsfdf2_cf, fix_truncdfsi2, fix_truncdfhi2, fix_truncdfqi2,
addi_sexthishl32, adddi_dilshr32, adddi_dilshr32_cf,
addi_dishl32, subdi_sexthishl32, subdi_dishl32, subdi3): Remove
manual CC_STATUS management.
(addsi3_internal, addhi3, addqi3, subsi3, subhi3, subqi3,
unnamed strict_lowpart subhi and subqi patterns): Set attr
"flags_valid".
(unnamed strict_lowpart addhi3 and addqi3 patterns): Likewise.
Remove code to operate on address regs and assert the case
does not occur.
(unnamed mulsidi patterns, divmodhi4, udivmodhi4): Remove
manual CC_STATUS_INIT.
(andsi3_internal, andhi3, andqi3, iorsi3_internal, iorhi3, iorqi3,
xorsi3_internal, xorhi3, xorqi3, negsi2_internal,
negsi2_5200, neghi2, negqi2, one_cmplsi2_internal, one_cmplhi2,
one_cmplqi2, unnamed strict_lowpart patterns
for andhi, andqi, iorhi, iorqi, xorhi, xorqi, neghi, negqi,
one_cmplhi and one_cmplqi): Set attr "flags_valid".
(iorsi_zext_ashl16, iorsi_zext): Remove manual CC_STATUS_INIT.
(ashldi_sexthi, ashlsi_16, ashlsi_17_24): Remove manual
CC_STATUS_INIT.
(ashlsi3, ashlhi3, ashlqi3, ashrsi3, ashrhi3, ashrqi3, lshrsi3,
lshrhi3, shrqi3, rotlsi3, rotlhi3, rotlhi3_lowpart, rotlqi3,
rotlqi3_lowpart, rotrsi3, rotrhi3, rotrhi_lowpart, rotrqi3,
unnamed strict_low_part patterns for HI and
QI versions): Set attr "flags_valid".
(bsetmemqi, bsetmemqi_ext, bsetdreg, bchgdreg, bclrdreg,
bclrmemqi, extzv_8_16_reg, extzv_bfextu_mem, insv_bfchg_mem,
insv_bfclr_mem, insv_bfset_mem, extv_bfextu_reg,
insv_bfclr_reg, insv_bfset_reg, dbne_hi, dbne_si, dbge_hi,
dbge_si, extendsfxf2, extenddfxf2, ): Remove manual cc_status management.
(various unnamed peepholes): Adjust compare/branch sequences
for new cbranch patterns.
(dbcc peepholes): Likewise, and output the comparison here
as well.
* config/m68k/predicates.md (valid_dbcc_comparison_p): Delete.
(fp_src_operand): Allow constant zero.
(address_reg_operand): New predicate.

* rtl.h (inequality_comparisons_p): Remove declaration.
* recog.h (next_insn_tests_no_inequality): Likewise.
* rtlanal.c (inequality_comparisons_p): Delete function.
* recog.c (next_insn_tests_no_inequality): Likewise.

From-SVN: r278681

Testsuite: Enable fp-int-convert-timode-1.c unconditionally when int128 supported.

This removes the call to fesetround as FE_TONEAREST
is the default and so the guard can be removed as well.

The test will then run as long as there's int128 support.

gcc/testsuite/ChangeLog:

* gcc.dg/torture/fp-int-convert-timode-1.c: Always run if int128.

From-SVN: r278680

tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Add assertion.

2019-11-25  Richard Biener  <rguenther@suse.de>

* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Add assertion.
(vect_detect_hybrid_slp): Swap lane and instance iteration,
properly re-building the visited hash-map for each lane.

From-SVN: r278679

[amdgcn] Silence warnings + add gcc_unreachable()

        * config/gcn/gcn.c (gcn_expand_scalar_to_vector_address,
        gcn_md_reorg): Remove unused variables.
        (gcn_emutls_var_init): Add missing (but unreachable) return
        to silence warning.
        (gcn_hsa_declare_function_name): Add gcc_unreachable to ensure
        target != TARGET_GCN3 or TARGET_GCN3 will fail instead of use
        an uninitialized variable.

From-SVN: r278678

re PR ada/92362 (double elaboration of expression in Address aspect)

PR ada/92362
* gcc-interface/trans.c (gnat_to_gnu) <N_Attribute_Definition_Clause>:
Use a temporary instead of clobbering the result with a freeze node.

From-SVN: r278675

DEC comparisons - allow Hollerith constants in comparisons.

The -fdec option enables the use of Hollerith comparisons in comparisons
with INTEGER, COMPLEX, REAL and CHARACTER expressions.

Mark Eggleston  <mark.eggleston@codethink.com>
Jim MacArthur  <jim.macarthur@codethink.co.uk>

* gfortran.texi: Update Hollerith constants support for character types
and use in comparisons.
* invoke.texi: Tidy up list of options. Update description of
-fdec-char-conversions.
* resolve.c (is_character_based): New.
(Convert_hollerith_to_character): New.  (convert_to_numeric): New.
(resolve_operator): If both sides are character based and -fdec is
enabled convert Hollerith to character. If an operand is Hollerith, the
other is numeric and -fdec is enabled convert to numeric.
(resolve_ordinary_assign): Add check for -fdec-char-conversions for
assignment of character literals.

Mark Eggleston <mark.eggleston@codethink.com>
Jim MacArthur <jim.macarthur@codethink.co.uk>

* gfortran.dg/dec-comparison-character_1.f90: New test.
* gfortran.dg/dec-comparison-character_2.f90: New test.
* gfortran.dg/dec-comparison-character_3.f90: New test.
* gfortran.dg/dec-comparison-complex_1.f90: New test.
* gfortran.dg/dec-comparison-complex_2.f90: New test.
* gfortran.dg/dec-comparison-complex_3.f90: New test.
* gfortran.dg/dec-comparison-int_1.f90: New test.
* gfortran.dg/dec-comparison-int_2.f90: New test.
* gfortran.dg/dec-comparison-int_3.f90: New test.
* gfortran.dg/dec-comparison-real_1.f90: New test.
* gfortran.dg/dec-comparison-real_2.f90: New test.
* gfortran.dg/dec-comparison-real_3.f90: New test.
* gfortran.dg/dec-comparison.f90: New test.

Co-Authored-By: Jim MacArthur <jim.macarthur@codethink.co.uk>
From-SVN: r278674

re PR ada/92575 (couple of suspicious assignments in expect.c)

PR ada/92575
* expect.c (__gnat_expect_poll [VMS, HPUX]): Fix typo.

From-SVN: r278671

ipa: Prevent materialization of clones with removed bodies (PR 92109)

2019-11-25  Martin Jambor  <mjambor@suse.cz>

PR ipa/92109
* cgraph.h (cgraph_node::remove_from_clone_tree): Declare.
* cgraphclones.c (cgraph_node::remove_from_clone_tree): New method.
(cgraph_materialize_clone): Move removel from clone tree to the
the new method and use it instead.
* ipa.c (symbol_table::remove_unreachable_nodes): When removing
bodies of clones, also remove it from the clone tree.

From-SVN: r278670

Make IPA-SRA follow comdat-local rules (PR 91956)

2019-11-25  Martin Jambor  <mjambor@suse.cz>

PR ipa/91956
* ipa-sra.c (process_isra_node_results): Put the new node to the
same comdat group as the original node.

testsuite/
* g++.dg/ipa/pr91956.C: New test.

From-SVN: r278669

Build double32 / long-double32 multilibs if needed.

gcc/
Build double32 / long-double32 multilibs if needed.
PR target/92055
* config/avr/t-avr:
(HAVE_DOUBLE_MULTILIB, HAVE_LONG_DOUBLE_MULTILIB): Remove vars.
(HAVE_DOUBLE32, HAVE_LONG_DOUBLE32, WITH_LONG_DOUBLE)
(HAVE_DOUBLE64, HAVE_LONG_DOUBLE64, WITH_DOUBLE): Set from
tm_defines and pass to genmultilib.awk.
* config/avr/genmultilib.awk: Use these variables to add double32
and / or long-double32 multilib(s) as needed.
* config/avr/driver-avr.c (avr_double_lib): Adjust comment.

From-SVN: r278668

cfgloop.h (get_loop_exit_edges): Add extra parameter denoting loop body, defaulted to NULL.

2019-11-25  Richard Biener  <rguenther@suse.de>

* cfgloop.h (get_loop_exit_edges): Add extra parameter denoting
loop body, defaulted to NULL.
(single_likely_exit): Add exit vector argument
* tree-ssa-loop-niter.h (loop_only_exit_p): Add loop body argument.
(number_of_iterations_exit): Likewise.
(number_of_iterations_exit_assumptions): Likewise.
* cfgloop.c (get_loop_exit_edges): Use passed in loop body
if not NULL.
* cfgloopanal.c (single_likely_exit): Use passed in exit vector.
* tree-ssa-loop-ivcanon.c (canonicalize_loop_induction_variables):
Compute exit vector around call to single_likely_exit.
* tree-ssa-loop-ivopts.c (tree_ssa_iv_optimize_loop): Pass down
loop body to loop_only_exit_p.
* tree-ssa-loop-niter.c (loop_only_exit_p): Get loop body from
caller.
(number_of_iterations_exit_assumptions): Get loop body from caller
if not NULL.
(number_of_iterations_exit): Pass through new loop body arg.
(infer_loop_bounds_from_undefined): Get loop body from caller.
(estimate_numbers_of_iterations): Compute loop body once.

From-SVN: r278667

cfganal.c (pre_and_rev_post_order_compute_fn): Use an auto_bb_flag instead of an sbitmap for visited handling.

2019-11-25  Richard Biener  <rguenther@suse.de>

* cfganal.c (pre_and_rev_post_order_compute_fn): Use an
auto_bb_flag instead of an sbitmap for visited handling.

From-SVN: r278666

[rs6000] Refactor FP vector comparison operators

This is a subsequent patch to refactor the existing float point
vector comparison operator supports.  The patch to fix PR92132
supplemented vector float point comparison by exposing the names
for unordered/ordered/uneq/ltgt and adding ungt/unge/unlt/unle/
ne.  As Segher pointed out, some patterns can be refactored
together.  The main link on this is:
https://gcc.gnu.org/ml/gcc-patches/2019-11/msg00452.html

gcc/ChangeLog

2019-11-25 Kewen Lin  <linkw@gcc.gnu.org>

    * config/rs6000/vector.md (vector_fp_comparison_simple): New code iterator.
    (vector_fp_comparison_complex): Likewise.
    (vector_<code><mode> for VEC_F and vector_fp_comparison_simple): New
    define_and_split.
    (vector_<code><mode> for VEC_F and vector_fp_comparison_complex): Likewise.
    (vector_lt<mode> for VEC_F): Refactor with vector_fp_comparison_simple.
    (vector_le<mode> for VEC_F): Likewise.
    (vector_unge<mode> for VEC_F): Likewise.
    (vector_unle<mode> for VEC_F): Likewise.
    (vector_ne<mode> for VEC_F): Likewise.
    (vector_ungt<mode> for VEC_F): Likewise.
    (vector_unlt<mode> for VEC_F): Likewise.
    (vector_ltgt<mode> for VEC_F): Refactor with vector_fp_comparison_complex.
    (vector_ordered<mode> for VEC_F): Likewise.
    (vector_uneq<mode> for VEC_F): Likewise.
    (vector_unordered<mode> for VEC_F): Likewise.

From-SVN: r278665

re PR libfortran/92100 (Formatted stream IO irreproducible read with binary data in file)

2019-11-24  Jerry DeLisle  <jvdelisle@gcc.ngu.org>

PR fortran/92100
gfortran.dg/streamio_18.f90: New test.

From-SVN: r278664

Daily bump.

From-SVN: r278663

re PR libfortran/92100 (Formatted stream IO irreproducible read with binary data in file)

2019-11-24  Jerry DeLisle  <jvdelisle@gcc.ngu.org>

PR fortran/92100
io/transfer.c (data_transfer_init_worker): Use fbuf_reset
instead of fbuf_flush before the seek. Note that fbuf_reset
calls fbuf_flush and adjusts fbuf pointers.

From-SVN: r278660

Fix EOF handling for arrays.

2019-11-23  Thomas Koenig  <tkoenig@gcc.gnu.org>
Harald Anlauf <anlauf@gmx.de>

PR fortran/92569
* io/transfer.c (transfer_array_inner):  If position is
at AFTER_ENDFILE in current unit, return from data loop.

2019-11-23  Thomas Koenig  <tkoenig@gcc.gnu.org>
Harald Anlauf <anlauf@gmx.de>

PR fortran/92569
* gfortran.dg/eof_6.f90: New test.

Co-Authored-By: Harald Anlauf <anlauf@gmx.de>
From-SVN: r278659

libstdc++: Improve _GLIBCXX_DEBUG __valid_range check

Adds iterator singular check within the valid range check.

* include/debug/functions.h: Remove <bits/move.h> include.
(__check_singular_aux, __check_singular): Move...
* include/debug/helper_functions.h:
(__check_singular_aux, __check_singular): ...here.
(__valid_range_aux): Adapt to use latter.
Add <bits/move.h> include.
* testsuite/25_algorithms/copy/debug/2_neg.cc: New.

From-SVN: r278658

Allow combiner to create autoinc in jump insns.

* combine.c (can_combine_p): Allow autoinc in jumps.

From-SVN: r278656

Do not ignore costs of jump insns in combine.

* combine.c (combine_instructions): Record costs for jumps.

From-SVN: r278655

Fix ix86 rtx costs for the pr30315 testcase (PR target/30315)

* config/i386/i386.c (ix86_rtx_costs): Handle care of a PLUS in a
COMPARE, representing an overflow detection.

From-SVN: r278654

Daily bump.

From-SVN: r278653