bluez5_utils: depends on BR2_TOOLCHAIN_HAS_SYNC_4

It uses __sync_fetch_and_add_4() and other 32-bit atomics, fixes:
http://autobuild.buildroot.net/results/498/4984850d872448c5702eac79b831891f77ad3cf0/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/qemu: bump to the latest linux versions

Keep arm_nuri on 3.10.x for the usual reasons.
Keep mips & mipsel (32 bits) on 4.3.x because 4.4.x fails to boot
properly (kernel stuck after the CPU cache info).

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.4.1           2.3.0   YES     OK
arm_nuri                3.10.96         2.3.0   YES(1)  OK most times(2)
arm_versatile           4.4.1           2.3.0   YES     OK
arm_vexpress            4.4.1           2.3.0   YES     OK
microblazebe            4.4.1           2.3.0   YES     OK
microblazeel            4.4.1           2.3.0   YES     OK
mips64el_malta          4.4.1           2.3.0   YES     OK
mips64_malta            4.4.1           2.3.0   YES     OK
mipsel_malta            4.3.5           2.3.0   YES     OK (4)
mips_malta              4.3.5           2.3.0   YES     OK (4)
ppc_g3beige             4.4.1           2.3.0   YES     OK
ppc_mpc8544ds           4.4.1           2.3.0   YES     OK
ppc_virtex_ml507        4.4.1           2.3.0   NO      OK
ppc64_pseries           4.4.1           2.3.0   YES     OK
sh4                     4.4.1           2.3.0   YES     OK
sh4eb                   4.4.1           2.3.0   NO(3)   OK
sparc_ss10              4.4.1           2.3.0   YES     OK
sparc64_sun4u           4.4.1           2.3.0   YES     OK
sparc_sun4u             4.4.1           2.3.0   YES     OK
x86                     4.4.1           2.3.0   YES     OK
x86_64                  4.4.1           2.3.0   YES     OK
xtensa_lx60             4.4.1           2.3.0   YES     OK

(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 starts it fails to work properly
(3) - Probably an endian issue with 8139 emulation/driver
(4) - Kernel stuck at cpu cache details from 4.4 - 4.4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/atmel/xplained/readme.txt: fix u-boot filename

The file that is actually produced is called u-boot-spl.bin, not
uboot-spl.bin.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/irda-utils: fix musl build

Fixes
http://autobuild.buildroot.net/results/9df/9dfa781a6ebbd8af6aad650067c30a4342b83f0d/
http://autobuild.buildroot.net/results/fee/feed5bc6393fb35be755790d53218fc0d228d850/
and others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ipsec-tools: fix broken download URL

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: bump version to 0.4.12

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: fix build on SPARC

mpd uses __atomic_*() built-ins, but forgets to link with -latomic
when needed, so this commit adds a patch that ensures it will link
with libatomic, and adds a dependency on BR2_TOOLCHAIN_HAS_ATOMIC.

Fixes:

  http://autobuild.buildroot.net/results/e2207280f3a177e12dba502b1c01f5aeb431d04c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: use upstream patches

This commit replaces 0002-musl-gcc5-fixes.patch by a backport of 3
upstream commits. It also renames
0001-thread-Name-include-stdio.h-for-prctl-as-well.patch to have the
sequence number 0004, so that it applies after the backported upstream
patches (since this patch is not upstream yet).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/procps-ng: Fix install, procps-ng does not use /usr/bin anymore

We do not need to move binaries around anymore since this commit:
https://gitlab.com/procps-ng/procps/commit/430b559ba2826f80dffa840622ae0fc744000b13

Removing PROCPS_NG_CONF_OPTS completely leads to binaries being
installed to /usr/bin, we still have to define a custom --exec-prefix
to get binaries in /bin:

libtool: install: /usr/bin/install -c free /home/bernd/buildroot/output/target/bin/free
libtool: install: /usr/bin/install -c pgrep /home/bernd/buildroot/output/target/bin/pgrep
libtool: install: /usr/bin/install -c pkill /home/bernd/buildroot/output/target/bin/pkill
libtool: install: /usr/bin/install -c pmap /home/bernd/buildroot/output/target/bin/pmap
libtool: install: /usr/bin/install -c pwdx /home/bernd/buildroot/output/target/bin/pwdx
libtool: install: /usr/bin/install -c tload /home/bernd/buildroot/output/target/bin/tload
libtool: install: /usr/bin/install -c uptime /home/bernd/buildroot/output/target/bin/uptime
libtool: install: /usr/bin/install -c vmstat /home/bernd/buildroot/output/target/bin/vmstat
libtool: install: /usr/bin/install -c w /home/bernd/buildroot/output/target/bin/w
libtool: install: /usr/bin/install -c pidof /home/bernd/buildroot/output/target/bin/pidof
libtool: install: /usr/bin/install -c kill /home/bernd/buildroot/output/target/bin/kill
libtool: install: /usr/bin/install -c slabtop /home/bernd/buildroot/output/target/bin/slabtop
libtool: install: /usr/bin/install -c watch /home/bernd/buildroot/output/target/bin/watch
libtool: install: /usr/bin/install -c top/top /home/bernd/buildroot/output/target/bin/top

Fixes:

  http://autobuild.buildroot.net/results/ab7/ab7ed83d60823c1b023c7b76fcbe9c20d537ed4c//

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: pass --exec-prefix=/ instead of an empty prefix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/numactl: fix musl build

Fixes:

  http://autobuild.buildroot.net/results/355/3555cd0abe68b6f0e2b2089af5ce26dbc4c73df6/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: rename patch and improve its description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/numactl: bump version to 2.0.11, add hash

The tarball contains a working configure script, therefore removed
autoreconf.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openpowerlink: bump to v2.2.2

From [1]:
With version 2.0, the source code has been cleanly split into
an application-oriented user library and a time-critical stack
driver. The latter may be moved to a dedicated communication
processor or into a kernel module to deliver enhanced
performance while still keeping the API in user space.

This new version break the API used in the v1.x but
this is a complete rewrite of the Powerlink EPSG DS 301
implementation. The v1.x is deprecated anyway.

The new build system has been split in several CMake projects
which makes it difficult to package with the Buildroot CMake
infra. So add a top level CMakeLists.txt to build each
openpowerlink component without having to package each of them
in a separate Buildroot packages. Also we need to fix the
build system to support the top level CMake build.

[1] http://sourceforge.net/projects/openpowerlink/

Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
 - rename patches to not contain the [FIX] part in their title.
 - rewrap Config.in help text
 - rename "openPOWERLINK stack type" to "stack type"
 - rename ""openpowerlink demos" to "demos"]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kbd: bump to 2.0.3 to fix musl build issue

kbd currently doesn't build against musl, due to some issues which
have already been fixed upstream. This commit therefore bumps to the
latest upstream version 2.0.3 to fix the musl build. In order to do
so, this commit also:

 - backports a patch that makes building tests optional, which allows
   to avoid a dependency on the check package

 - updates the libintl patch to work with the latest upstream

Fixes:

  http://autobuild.buildroot.net/results/535/5357953e763a1ac4f17332abac54ce2946629a41/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squeezelite: fix musl build

The build error was not yet found by the autobuilders:

output_alsa.c: In function ‘output_init_alsa’:
output_alsa.c:865:10: error: ‘M_TRIM_THRESHOLD’ undeclared (first use in this function)
  mallopt(M_TRIM_THRESHOLD, -1);
          ^
output_alsa.c:865:10: note: each undeclared identifier is reported only once for each function it appears in
output_alsa.c:866:10: error: ‘M_MMAP_MAX’ undeclared (first use in this function)
  mallopt(M_MMAP_MAX, 0);
          ^

This commit adds a patch fixing this build error by making the
mallopt() usage conditional on __GLIBC__.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: only enclose the mallopt() call in __GLIBC__, use Git to
format the patch, improve the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squeezelite: reformat existing patch as a Git formatted patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iucode-tool: bump version to 1.5

Upstream changed to gitlab.com
Added hash
Upstream tarballs contains a working configure script, therefore remove
autoreconf.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/jquery-validation: bump version to 1.14.0, added hash

This patch also fixes the broken download of the previous version.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qt5/qt5base: fix musl build

Fixes
http://autobuild.buildroot.net/results/a15/a1586717154efb6495dfcdb5c7ce11a047dd68db/
http://autobuild.buildroot.net/results/363/3636ddcc0efa974c674f36d3c65eea5beb32af52/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts: add size-stats-compare script

Leverage the CSV files produces by size-stats (make graph-size) to allow
for a comparison of rootfs size between two different buildroot
compilations.

The script takes the file-size CSV files of two compilations as input, and
produces a textual report of the differences per package.
Using the -d/--detail flag, the report will show the file size changes
instead of package size changes.
The -t/--threshold option allows to ignore file size differences smaller
or equal than the given threshold (in bytes).

Example output is:

Size difference per package (bytes), threshold = 0
--------------------------------------------------------------------------------
       -8192         busybox
      228572   added dmalloc
      301584   added jq
--------------------------------------------------------------------------------
      521964         TOTAL

or with detailed view:

Size difference per file (bytes), threshold = 0
--------------------------------------------------------------------------------
       -8192         bin/busybox
       18152   added usr/bin/jq
       39252   added usr/bin/dmalloc
       46968   added usr/lib/libdmalloc.so
       47288   added usr/lib/libdmallocxx.so
       47316   added usr/lib/libdmallocth.so
       47748   added usr/lib/libdmallocthcxx.so
      283432   added usr/lib/libjq.so.1.0.4
--------------------------------------------------------------------------------
      521964         TOTAL

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

socat: security bump to version 2.0.0-b9

Fixes:
Socat security advisory 7 and MSVR-1499: "Bad DH p parameter in OpenSSL"
Socat security advisory 8: "Stack overflow in arguments parser"

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-twisted: enable Python 3 support

setup3.py will be automatically invoked from setup.py,
if executing on Python 3 platform.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openobex: fix broken download URL, add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libcue: update upstream URL

According to http://sourceforge.net/projects/libcue the project moved
to github.com, all source tarballs were removed from Sourceforge.

Adjust project and download URLs, update hash and remove
0001-_unused-fix.patch because there is no trace of "__unused" in the
upstream tarball anymore, the patch fails to apply.

Add autoreconf because the new upstream tarball does not contain a
configure script, autoreconf also needs a tweak because it fails when
config/ is not present.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pulseaudio: fix musl build

Fixes build errors in previous version which are still present
http://autobuild.buildroot.net/results/879/879260f0efc80c2c9061d89d3e99ad107083f72a/
http://autobuild.buildroot.net/results/1e5/1e5f6a5f349800226d8b07601dab68ffe7794461/
http://autobuild.buildroot.net/results/0f8/0f8d68b11c6807a9d1d4c40a66430ac096902720/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
 - Rework patch 0001-padsp-Make-it-compile-on-musl.patch to put
   Bernd's comment and SoB *after* the original commit log.
 - Rework patch 0002-musl-fixes.patch for the same reason, and also to
   remove the xlocale.h part, which has already been fixed upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openipmi: fix musl build

The build error is known upstream
http://sourceforge.net/p/openipmi/patches/26/
and was not yet caught by our autobuilders:

ui.c: In function ‘get_ip_addr’:
ui.c:340:5: error: unknown type name ‘u_int32_t’
     u_int32_t     addr;

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/psmisc: fix musl build

Add upstream commit fixing a build error not yet been found by the
autobuilders:

pstree.c: In function ‘get_threadname’:
pstree.c:798:15: error: ‘PATH_MAX’ undeclared (first use in this function)
     char path[PATH_MAX + 1];
               ^
pstree.c:798:15: note: each undeclared identifier is reported only once for each function it appears in
pstree.c:798:10: warning: unused variable ‘path’ [-Wunused-variable]
     char path[PATH_MAX + 1];
          ^

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/wipe: fix musl build

The build error was not yet found by the autobuilders:

In file included from main.c:46:0:
rand.h:31:9: error: unknown type name ‘u_int32_t’
 typedef u_int32_t u_rand_t;
         ^
<builtin>: recipe for target 'main.o' failed

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pulseview: update musl patch

Upstream requested to update the source of the musl patch:
http://article.gmane.org/gmane.comp.debugging.sigrok.devel/1954

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libsigrok: update musl patch

Upstream chose a different fix:
http://article.gmane.org/gmane.comp.debugging.sigrok.devel/1951

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iprutils: add patch to fix musl build

This commit adds a patch to the iprutils to fix the build with the
musl C library.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: reformatted the patch with Git, added a better commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iprutils: bump version to 2.4.10

Upstream now provides a new autoconf-based build system, therefore
our patches for Makefile are not needed anymore.

We adapt the gettext patch to make sure that the configure script
doesn't check for libintl.h, and we add an additional patch to fix the
libm check.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: rework patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libndp: fix musl build

Fixes
http://autobuild.buildroot.net/results/d42/d42bebe51bbec38f131840b6bbefdc162f0ad194/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iperf3: fix musl build

Ported -D_GNU_SOURCE from https://dev.openwrt.org/changeset/45103

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lcdproc: fix musl build

Fixes
http://autobuild.buildroot.net/results/9ce/9cec3bea99f2aa10313da38c1e81655666c774f7/
http://autobuild.buildroot.net/results/b3d/b3d09286d018e53a6d57f8dd5616010a3b212731/
http://autobuild.buildroot.net/results/aa2/aa27b150a79b14fe1dda74a56371b4ee35b3ac15/
and others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: add dependency on BR2_TOOLCHAIN_HAS_SYNC_4

samba4 uses the __sync_fetch_and_add_4() atomic built-in, so it should
depend on BR2_TOOLCHAIN_HAS_SYNC_4 in order to avoid build failures on
architectures not providing this atomic built-in.

Fixes:

  http://autobuild.buildroot.org/results/0d0fd9d2a132a40a840bea5df59c35d8573ebf45/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aespipe: add host variant

Having the host version may allow post-image scripts to encrypt the
resulting image with aespipe (and decrypt it in the update tool on the
target).

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
[Thomas: rewrap Config.in help text, tweak commit title.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: update freescale_imx6qsabreauto_defconfig kernel version

Signed-off-by: Jan Sarenik <jan.sarenik@ysoft.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

micropython: bump to v1.6

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xvkbd: bump version to 3.7

Also switch upstream URL to new host as mentioned on old site.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/oprofile: fix musl build

The build error has not yet been found by the autobuilders:

operf.cpp: In function ‘int __delete_old_previous_sample_data(const char*, const stat*, int, FTW*)’:
operf.cpp:862:10: error: ‘FTW_STOP’ was not declared in this scope
   return FTW_STOP;
          ^
operf.cpp:864:10: error: ‘FTW_CONTINUE’ was not declared in this scope
   return FTW_CONTINUE;
          ^
operf.cpp: In function ‘void convert_sample_data()’:
operf.cpp:899:41: error: ‘FTW_ACTIONRETVAL’ was not declared in this scope
                 int flags = FTW_DEPTH | FTW_ACTIONRETVAL;

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/knock: bump version to 0.7.8

Upstream source repo switched to github.com. Since the last release
dating back to 2014 no new tarball was released so we switch to the
latest github commit.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ympd: needs <dlfcn.h>

Add a dependency on !BR2_STATIC_LIBS, since <dlfcn.h> is used. While
we're at it, we also fix the comment which was lacking the BR2_USE_MMU
dependency.

Fixes:

  http://autobuild.buildroot.org/results/30853c1011544f8b6a5d3b3852af93bef4c0f5cb/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boost: fix missing select on BR2_PACKAGE_LIBICONV

The boost package adds a dependency on the libiconv package when
boost-locale is selected but locale support is not available in the
toolchain. However, it forgets to select BR2_PACKAGE_LIBICONV in this
situation, causing the following build failure:

  http://autobuild.buildroot.org/results/ab1809f4fa8cf29208f9503edd90aca87fe397c2/

This commit fixes this mistake by adding the necessary select
BR2_PACKAGE_LIBICONV.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

neard: add missing BR2_TOOLCHAIN_HAS_SYNC_4 dependency

Fixes:

  http://autobuild.buildroot.org/results/b8bf7be2efd8e8e369abdde0a5bec564e8cd6f23/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

freerdp: add missing BR2_TOOLCHAIN_HAS_SYNC_4 dependency

Fixes:

  http://autobuild.buildroot.org/results/0501e63cbebe4cda4012ace6f7ec5f43342be5c5/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

openal: fix atomic handling

openal can uses __atomic_*() intrinsics when available, or fall-back
on __sync_*() built-ins. This commit adjusts the package to take into
account for those dependencies, and makes sure we link against
libatomic when gcc >= 4.8 so that the __atomic_*() intrinsics can be
used on all architectures.

Fixes:

  http://autobuild.buildroot.org/results/314fb8da3ca87984e9240d67ff233e2f999ae89e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

glog: fix atomic built-in problem

glog can optionally use atomic __sync built-ins. However, its
configure script only checks for the availability of the 4-byte
variant, but the code also uses the 1-byte variant. While this works
on most architectures, it does not on architectures that implement
only the 4-byte variant, such as Microblaze. So if the architecture
does not implement the 1-byte variant, we hint the configure script
that atomic built-ins should not be used.

Fixes:

  http://autobuild.buildroot.org/results/bedebd594c283adf39374c9a9f44432e5d6cbff7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

arch: remove BR2_ARCH_HAS_ATOMICS option

Now that BR2_ARCH_HAS_ATOMICS is no longer used anywhere, we can
remove it from arch/Config.in*, as well as from the documentation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

msgpack: rework BR2_ARCH_HAS_ATOMICS dependency

The msgpack source code indeed checks for the 4 bytes __sync built-in,
so this commit switches the package from a BR2_ARCH_HAS_ATOMICS
dependency to a BR2_TOOLCHAIN_HAS_SYNC_4 dependency.

python-msgpack, a reverse dependency of msgpack, is changed in the
same way.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

thrift: remove BR2_ARCH_HAS_ATOMICS dependency

thrift builds perfectly fine on SPARC, which doesn't implement any of
the __sync built-ins, so we can get rid of the BR2_ARCH_HAS_ATOMICS
dependency.

The dependency on atomic operations originated in commit
1aaa14d84f1c920423ed0286b78f64a2b4b2b575 ("thrift: disable for ARC"),
but there was no reference to any autobuilder failure. Our testing
with an ARC toolchain that doesn't have atomics shows that thrift
builds just fine, and code inspection also shows no usage of
__sync_*() built-ins. At the time of the commit, the thrift version
was 0.9.1, which also did not contain any __sync_*() call.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: build-tested on an ARC toolchain without
 atomics, with CPU 770D]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

squid: rework atomic handling

squid can use the __sync built-ins when available, but uses an
AC_TRY_RUN autoconf tests to check their availability, which isn't
compatible with cross-compilation. Due to this, squid.mk is already
hinting the configure script about this by passing
squid_cv_gnu_atomics=yes/no depending on the availability of atomic
operations.

So far, squid.mk was assuming that BR2_ARCH_HAS_ATOMICS &&
BR2_ARCH_IS_64 was needed, since 8 bytes __sync built-ins are
used. However, this was a bit too restrictive, since certain 32 bits
architectures (ARM, x86) do provide 8 bytes __sync built-ins.

So, instead of using BR2_ARCH_HAS_ATOMICS, we now rely on
BR2_TOOLCHAIN_HAS_SYNC_4 and BR2_TOOLCHAIN_HAS_SYNC_8, since both 4
bytes and 8 bytes __sync built-ins are tested by the autoconf test.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

cairo, harfbuzz: rework atomic dependencies

This commit handles the reverse dependency tree of cairo in terms of
atomic dependencies. There are two main changes:

 - cairo in fact no longer needs atomic operations. It can perfectly
   build without any __sync built-in, as was tested using an ARC
   toolchain without atomics, and a SPARC toolchain. Optionally, Cairo
   can use the __atomic builtins provided by gcc >= 4.7, so support
   for this is added as well. Thanks to this change, the
   BR2_ARCH_HAS_ATOMICS dependency is removed from cairo and all its
   reverse dependencies.

 - harfbuzz does require the __sync built-in for 4 bytes integers, so
   we add a dependency on BR2_TOOLCHAIN_HAS_SYNC_4 to harfbuzz and all
   its reverse dependency, the main one being the pango package. Due
   to this, the vast majority of gtk-related packages are moved to a
   dependency on BR2_ARCH_HAS_ATOMICS (which used to be due to cairo)
   to a dependency on BR2_TOOLCHAIN_HAS_SYNC_4 (due to pango ->
   harfbuzz).

In detail:

 - cairo

   Remove BR2_ARCH_HAS_ATOMICS dependency, link against -latomic when
   gcc >= 4.8 in order to use the __atomic functions.

 - harfbuzz

   Add dependency on BR2_TOOLCHAIN_HAS_SYNC_4

 - cairomm, gst-plugins-good, gst1-plugins-good, libgdiplus,
   libsvg-cairo, weston

   Remove BR2_ARCH_HAS_ATOMICS dependency (since cairo no longer needs
   atomics)

 - enlightenment, cwiid, gst-plugins-bad, gst-plugins-base,
   gst1-plugins-bad, gst1-plugins-base, gtkmm3,
   libevas-generic-loaders, libfm, libgail, libgtk2, libgtk3, librsvg,
   openbox, opencv, opencv3, pango, pangomm, pcmanfm, pinentry,
   rrdtool, webkit, webkitgtk24, xscreensaver

   Switch from a BR2_ARCH_HAS_ATOMICS dependency to a
   BR2_TOOLCHAIN_HAS_SYNC_4 (they depend on pango, harfbuzz, gtk, or
   some other related package)

 - directfb

   Remove BR2_ARCH_ATOMICS dependency of the BR2_PACKAGE_DIRECTFB_SVG
   (since cairo can build without atomics), but add a
   BR2_TOOLCHAIN_HAS_SYNC_4 dependency on BR2_PACKAGE_DIRECTFB itself
   since it does use __sync built-ins. This replaces the !BR2_sparc
   dependency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gauche: disable on SPARC(64), remove atomics dependency

gauche does not build on sparc64, it fails with:

  No rule to make target 'sparc_mach_dep.lo', needed by 'libgc.la'

On Sparc, it first fails with the usual "membar" assembler issue which
comes from gauche's internal version of libatomic_ops. However, even
passing -DAO_NO_SPARC_V9 like we do for libatomic_ops is not
sufficient, as we fall into the same build problem as on sparc64.

Consequently, this commit disables the gauche package on the sparc and
sparc64 architectures.

Since it uses its own libatomic_ops copy, and libatomic_ops does not
have any dependency on atomic built-ins, we also remove the
BR2_ARCH_HAS_ATOMICS dependency. It was originally added to prevent
gauche from being built on sparc, but this will no longer happen.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libtorrent: use the proper BR2_TOOLCHAIN_HAS_SYNC_x symbols

libtorrent uses 1 bytes and 4 bytes __sync built-ins, so let's use the
appropriate BR2_TOOLCHAIN_HAS_SYNC_x symbols instead of
BR2_ARCH_HAS_ATOMICS. The rtorrent package, which is a reverse
dependency of libtorrent, gets fixed as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: build-tested on an ARC toolchain without
 atomics, with CPU 770D]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

jack2: use the proper BR2_TOOLCHAIN_HAS_SYNC_x symbol

Move away from BR2_ARCH_HAS_ATOMICS and use BR2_TOOLCHAIN_HAS_SYNC_4
instead for the jack2 package and its reverse dependency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

apache, apr: fix atomic handling

Since the apache package was introduced,
--enable-nonportable-atomics=yes was passed when
BR2_ARCH_HAS_ATOMICS. However, Apache doesn't take this option: it
only passes it down when building the APR library. But since we're
building APR separately, this statement had no effect.

So this commit removes the useless code from the Apache package, and
instead adds the appropriate logic to the apr package, using the new
BR2_TOOLCHAIN_HAS_SYNC_x symbols rather than BR2_ARCH_HAS_ATOMICS.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>

pulseaudio: remove BR2_ARCH_HAS_ATOMICS dependency

pulseaudio is able to either use the atomic __sync builtins from the
compiler, or to rely on libatomic_ops for atomic operations. However,
since it anyway selects json-c which requires the __sync built-ins, it
means using libatomic_ops is useless: even if you use libatomic_ops
for pulseaudio, you'd still get a link error in pulseaudio due to the
missing __sync built-in for the json-c library.

Also, since pulseaudio now inherits the BR2_TOOLCHAIN_HAS_SYNC_4 from
json-c, which matches the __sync built-in from pulseaudio, this
commit:

 - Drops the BR2_ARCH_HAS_ATOMICS dependency
 - Forces pulseaudio to not detect libatomic_ops
 - Propagates the removal of BR2_ARCH_HAS_ATOMICS dependency to
   pulseaudio's reverse dependencies.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

json-c: needs __sync_val_compare_and_swap_4

While json-c itself builds fine on platforms that don't provide the
__sync atomic built-ins, it does use them. json-c doesn't fail to
build because only a library is built, so such function calls are left
unresolved. But as soon as it gets used in another package linked in a
program, linking will fail due to the missing
__sync_val_compare_and_swap_4() function.

To fix this, we make json-c depend on BR2_TOOLCHAIN_HAS_SYNC_4, and
propagate to the reverse dependencies:

 - json-c
   - fastd
   - pulseaudio
     - efl
     - espeak
     - gst-plugins-good
     - gst1-plugins-good
     - mpd
   - rsyslog
   - ubus

Note that pulseaudio already had a BR2_ARCH_HAS_ATOMICS dependency,
which we are keeping for the moment, and will clean-up in a subsequent
commit.

This commit will also fix packages that could optionally use json-c,
and therefore fixes build failures like:

  http://autobuild.buildroot.org/results/4fe/4feaa9089ee9a183c5086b791bea35c0156945af/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

docs/manual: document usage of BR2_TOOLCHAIN_HAS_SYNC_x

This commit updates the documentation to detail when and how to use
the BR2_TOOLCHAIN_HAS_SYNC_x dependency. Note that we chose to not add
a comment about this dependency, because it is mainly tied to
architecture capabilities (except in very specific cases, which would
be way too complicated to explain in a Config.in comment).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add BR2_TOOLCHAIN_HAS_{SYNC_x, ATOMIC} hidden booleans

Currently, Buildroot provides one BR2_ARCH_HAS_ATOMICS boolean option
to indicate whether the architecture supports atomic operations or
not. However, the reality of atomic operations support is much more
complicated and requires more than one option to be expressed
properly.

There are in fact two types of atomic built-ins provided by gcc:

 (1) The __sync_*() family of functions, which have been in gcc for a
     long time (probably gcc 4.1). They are available in variants
     operating on 1-byte, 2-byte, 4-byte and 8-byte integers. Some
     architectures implement a number of variants, some do not
     implement any, some implement all of them.

     They are now considered "legacy" by the gcc developers but are
     nonetheless still being used by a significant number of userspace
     libraries and applications.

     https://gcc.gnu.org/onlinedocs/gcc/_005f_005fsync-Builtins.html

 (2) The __atomic_*() family of functions, which have been introduced
     in gcc 4.7. They have been introduced in order to support C++11
     atomic operations. In gcc 4.8, they are available on all
     architectures, either built-in or in the libatomic library part
     of the gcc runtime (in which case the application needs to be
     linked with -latomic). In gcc 4.7, the __atomic_*() intrinsics
     are only supported on certain architectures, since libatomic did
     not exist at the time.

For (1), a single BR2_ARCH_HAS_ATOMICS is not sufficient, because
depending on the architecture, some variants may or may not be
available. Setting BR2_ARCH_HAS_ATOMICS to false as soon as one of the
variant is missing would cause a large number of packages to become
unavailable, even if they in fact use only more common variants
available on a large number of architectures. For this reason, we've
chosen to introduce four new Config.in options:

 - BR2_TOOLCHAIN_HAS_SYNC_1
 - BR2_TOOLCHAIN_HAS_SYNC_2
 - BR2_TOOLCHAIN_HAS_SYNC_3
 - BR2_TOOLCHAIN_HAS_SYNC_4

Which indicate whether the toolchain support 1-byte, 2-byte, 4-byte
and 8-byte __sync_*() built-ins respectively.

For (2), we introduce a BR2_TOOLCHAIN_HAS_ATOMIC, which indicates if
the __atomic_*() built-ins are available. Note that it is up to the
package to link with -latomic when gcc is >= 4.8. Since __atomic_*()
intrinsics for all sizes are supported starting

We conducted a fairly large analysis about various architectures
supported by Buildroot, as well as with a number of different
toolchains, to check which combinations support which variant. To do,
we linked the following program with various toolchains:

int main(void)
{
uint8_t a;
uint16_t b;
uint32_t c;
uint64_t d;

__sync_fetch_and_add(&a, 3);
__sync_fetch_and_add(&b, 3);
__sync_fetch_and_add(&c, 3);
__sync_fetch_and_add(&d, 3);

__sync_val_compare_and_swap(&a, 1, 2);
__sync_val_compare_and_swap(&b, 1, 2);
__sync_val_compare_and_swap(&c, 1, 2);
__sync_val_compare_and_swap(&d, 1, 2);

__atomic_add_fetch(&a, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&b, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&c, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&d, 3, __ATOMIC_RELAXED);

__atomic_compare_exchange_n(&a, &a, 2, 1,  __ATOMIC_RELAXED,  __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&b, &b, 2, 1,  __ATOMIC_RELAXED,  __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&c, &c, 2, 1,  __ATOMIC_RELAXED,  __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&d, &d, 2, 1,  __ATOMIC_RELAXED,  __ATOMIC_RELAXED);

return 0;
}

And looked at which symbols were unresolved. For the __atomic_*()
ones, we tested with and without -latomic to see which variants are
built-in, which variants require libatomic. This testing effort has
led to the following results:

                __sync       __atomic    gcc
               1  2  4  8    1  2  4  8
ARC            Y  Y  Y  -    Y  Y  Y  L   4.8 [with BR2_ARC_ATOMIC_EXT]
ARC            -  -  -  -    L  L  L  L   4.8 [without BR2_ARC_ATOMIC_EXT]
ARM            Y  Y  Y  X    Y  Y  Y  Y   4.8, 4.7
ARM            Y  Y  Y  -                 4.5
AArch64        Y  Y  Y  Y    Y  Y  Y  Y   4.9, 5.1
Bfin           -  -  Y  -                 4.3
i386 (i386)    -  -  -  -    L  L  L  L   4.9
i386 (i486..)  Y  Y  Y  -    L  L  L  L   4.9 [i486, c3, winchip2, winchip-c6]
i386 (> i586)  Y  Y  Y  Y    L  L  L  L   4.9
Microblaze     -  -  Y  -    L  L  Y  L   4.9
MIPS           Y  Y  Y  -    Y  Y  Y  L   4.9
MIPS64         Y  Y  Y  Y    Y  Y  Y  Y   4.9
NIOS 2         Y  Y  Y  -    Y  Y  Y  L   4.9, 5.2
PowerPC        Y  Y  Y  -    Y  Y  Y  L   4.9
SuperH         Y  Y  Y  -    Y  Y  Y  L   4.9
SPARC          -  -  -  -    L  L  L  L   4.9
SPARC64        Y  Y  Y  Y    Y  Y  Y  Y   4.9
x86_64         Y  Y  Y  Y    Y  Y  Y  Y   4.7, 4.9
Xtensa         Y  Y  Y  -    Y  Y  Y  Y   4.9

Notes:

 * __atomic built-ins appeared in gcc 4.7, so for toolchais older than
   that, the __atomic column is empty.

 * Y means 'supported built-in'

 * L means 'supported via linking to libatomic' (only for __atomic
   functions)

 * X indicates a very special case for 8 bytes __sync built-ins on
   ARM. On ARMv7, there is no problem, starting from gcc 4.7, the
   __sync built-in for 8 bytes integers is implemented, fully in
   userspace. For cores < ARMv7, doing a 8 bytes atomic operation
   requires help from the kernel. Unfortunately, the libgcc code
   implementing this uses the __write() function to display an error,
   and this function is internal to glibc. Therefore, if you're using
   glibc everything is fine, but if you're using uClibc or musl, you
   cannot link an application that uses 8 bytes __sync
   operations. This has been fixed as part of gcc PR68095, merged in
   the gcc 5 branch but not yet part of any gcc release.

 * - means not supported

This commit only introduces the new options. Follow-up commits will
progressively change the packages using BR2_ARCH_HAS_ATOMICS to use
the appropriate BR2_TOOLCHAIN_HAS_SYNC_x or BR2_TOOLCHAIN_HAS_ATOMIC
until the point where BR2_ARCH_HAS_ATOMICS can be removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

icu: libatomic is only available starting from gcc 4.8

Fixes:

  http://autobuild.buildroot.org/results/51b060bbdecdcaac89f764026693bf711e7145d5/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

defconfigs: all use the headers from the kernel

For most defconfigs, it was trivial to deduce the kernel version, by
just reading the version string, which could be:
  - a standard upstream version string vX.Y.Z
  - a non-standard version string, but still containg the standard X.Y.Z

Those for which it was not so trivial were those hosted on git tree.
Since most were already using a custom linux-headers version, it could
be easily deduced from that. It was confirmed by browsing said git trees
and check the version there.

There are a few cases were there was a mismatch:

  - microzed:     uses a 3.18 kernel, but 3.8 headers; fixed.
  - xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed.
  - zedboard:     uses a 3.18 kernel, but 3.8 headers; fixed.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: drop the option to use the same version as that of the headers

It is no longer meaningful, now that we have the option to use the
kernel version for the linux headers, as it is more logical and more
versatile.

Add it to legacy.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

defconfigs: use the new headers-version-same-as-kernel-version option

Now that we can say that the linux headers version should match that of
the kernel to be built, we inverse the logic in our defconfigs, as it is
more sensible that way.

And also because we'll get rid of the former, converse kernel-same-as-headers
option.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bind: fix intermittent build issues with high BR2_JLEVEL

Build sometimes breaks with:

libtool: link: `unix/os.lo' is not a valid libtool object
make[3]: *** [rndc-confgen] Error 1
make[3]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `/scratch/peko/build/bind-9.6-ESV-R4/bin/rndc/unix'

So disable parallel builds.

This patch was removed with commit
c36b5d89c5616f7ca0a7295cbb5c231606beb71e by Gustavo Zacarias
<gustavo@zacarias.com.ar> but the problem still occurs, so disabling
parallel builds again.

Fixes:
http://autobuild.buildroot.org/results/220/2201f04170ea8ef0961e907efce07c041a57c229/

Signed-off-by: Jan Heylen <heyleke@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libbsd: upgrade to v0.8.2 and expand architecture support

When libbsd still supported uClibc as a C library, we added the architecture
exclusions because uClibc's a.out.h includes linux/a.out.h. The latter only
exists for the specified architectures.

However, glibc doesn't include linux/a.out.h, it instead has its own
implementation and it adds a flag to indicate if a.out is supported on this
architecture or not.

Since libbsd currently only supports glibc-based toolchains, the architecture
exclusions are no longer valid.

On microblaze, the build still fails, but this time because of ELF support.
libbsd explicitly handles architectures and microblaze is not one of them (see
local-elf.h).

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php: security bump version to 5.6.18

Changelog: http://www.php.net/ChangeLog-5.php#5.6.18
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdotool: needs MMU support

Fixes:
http://autobuild.buildroot.net/results/d750919a0d5cfb624937c72253651a431212e238

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mraa: bump version to 0.9.1

Removed patches applied upstream:
https://github.com/intel-iot-devkit/mraa/commit/86a0e10c037e5c069c48012f169f9e8e2587a0ef
https://github.com/intel-iot-devkit/mraa/commit/a87a104efeb83d4e762992e5be3b8908e6d2bf40

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-psutil: bump to 3.4.2

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rsyslog: fix musl buil

The build error was not yet being found by the autobuilders:

omfile.c: In function ‘prepareFile’:
omfile.c:580:3: error: implicit declaration of function ‘open’ [-Werror=implicit-function-declaration]
   fd = open((char*) newFileName, O_WRONLY|O_APPEND|O_CREAT|O_NOCTTY|O_CLOEXEC,
   ^

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lirc-tools: not available on musl

GLOB_BRACE is not supported by the musl libc:
http://www.openwall.com/lists/musl/2013/09/16/1

Upstream correctly rejected the hack proposed by me:
http://patchwork.ozlabs.org/patch/576188/
http://sourceforge.net/p/lirc/tickets/174/#b087

Fixes
http://autobuild.buildroot.net/results/603/603c4426c47220808305a416f3d60fec2d8c02a3/
http://autobuild.buildroot.net/results/c08/c08abddeb5f0d0d1adec63ab4390562e3cfe1087/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sconeserver: location support needs host-pkgconf

Patch suggested by Arnout: http://patchwork.ozlabs.org/patch/576212/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-setuptools: enable Python 3.x support

Add missing XML dependency.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add a upstream patch to fix vlc runtime issues

IDN related declaration without implementation is a bad idea.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: fix MIPS builds with disabled threads

There was a regression found while building for MIPS
with disabled threads. Upstream patch fixed it.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: bump ARC toolchain components to arc-2015.12

This change introduces newer ARC toolchain in Buildroot.

That new arc-2015.12 release doesn't bring any significant changes
but mostly is focused on fixes and minor improvements here and there.
Most noticeable changes are:
 * GCC: Source update to v4.8.5
 * GDB: Updated to upstream 7.10 release.

You may find more info on fixes and improvements in that release at:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2015.12

Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grep: bump to version 2.23

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

network-manager: bump to version 1.0.10

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus-glib: bump version to 0.106

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

protobuf: introduce BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS

The architecture dependencies of protobuf are going to change, and
they are already duplicated between protobuf, ola and mosh. In order
to factorize the expression of those dependencies, this commit
introduces BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS.

Note that we include in this hidden Config.in option both the target
architecture dependency and the host architecture dependency.

Finally, this commit also fixes a real mistake in the mosh Config.in
file, where the condition on the architecture dependency for the
Config.in comment was inverted: we only want to show the Config.in
comment when we are on supported architectures.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cffi: bump to 1.5.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: add support for ARM Juno r0 and r1 Development Boards

The Juno ARM Development Platform (ADP) is a software development
platform for ARMv8-A, it includes the Juno Versatile Express board
and an ARMv8-A reference software port available through Linaro.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/misc: Adding Vagrant file for provisioning

This patch adds a Vagrant file to buildroot. With this file
you can provision a complete buildroot developing environment
in minutes on all major platforms (Linux/Mac/Windows).

[Peter: bump to 2GB RAM, hardcode Buildroot release, add unzip,
drop website update and tweak manual text as suggested by Yann]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/external: newer Linaro toolchains do not provide source code

Currently, we have a pattern-matching that automatically derives the
the source tarball filename from the binary tarball filename.

However, the latest Linaro toolchains no longer follow that scheme (and
do not even readily provide the sources...).

Remove the generic pattern-matching, and explicitly set the source
tarball name for those toolchains that do have a source tarball readily
available.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: copy_toolchain_lib_root: rename LIBSPATH to LIBPATHS

LIBSPATH is populated based on a find with a pattern that can look like:
    libfoo*.so
and thus the output of the find will contain all file paths that match this
pattern.

Unfortunately, the name LIBSPATH suggests that only one entry is returned,
rather than possibly multiple.

As this code is quite complex, use the more accurate name LIBPATHS iso
LIBSPATH.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: bump version to 5.5.1

Reduce hash lists to strongest only (sha256).

Remove upstream committed patches (qt5base):
 - 0004-no-gold-linker-for-host-build.patch (see [1], [2])
 - 0007-big_endian-fix_destformat.patch (see [3])
 - 0008-QtGui-force-image-dir-in-include_path.patch (see [4], [5])

[1] https://bugreports.qt.io/browse/QTBUG-46125
[2] https://codereview.qt-project.org/#/c/113563/
[3] https://codereview.qt-project.org/#/c/120654/
[4] https://bugreports.qt.io/browse/QTBUG-47400
[5] https://codereview.qt-project.org/#/c/122145/

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix .loc processing in xtensa gas

Fixes:
  http://autobuild.buildroot.net/results/bff7436a800eeea92c0c92bd2846b0f2b31947fd/

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: bump to version 3.4.9

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyparted: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-smbus-cffi: new package

[Thomas:
 - fix license, it's GPLv2, not GPLv2+.]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cffi: add host variant

Host variant is needed to cross-compile CFFI based C library wrappers.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - add dependency on host-pkgconf for the host package variant.
 - add various environment variables needed to make pkg-config behave
   properly when building host-python-cffi. Otherwise, pkg-config
   returns values that are appropriate to build things for the target,
   and the build fails.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pycparser: new package

pycparser requires C preprocessor in order to parse C related files,
hence available only as host package.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libffi: fix headers location for host-libffi

There is a special hook for target-libffi, that moves headers
from /usr/lib/libffi-version/include to /usr/include. This patch
adds the same procedure for host-libffi.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - factorize code between the staging headers cleanup and the host
   headers cleanup.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libffi: fix staging headers cleanup

The LIBFFI_MOVE_STAGING_HEADERS function is responsible for moving
around libffi headers to a standard location. Once this is done, it
removes the no longer used directory, but does so in $(TARGET_DIR) and
not $(STAGING_DIR). This directory is already cleaned up in
$(TARGET_DIR) in the LIBFFI_REMOVE_TARGET_HEADERS post-install target
hook.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netaddr: new package

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
  - remove excessive empty new line at the end of Config.in
  - specify BSD-3c as the license, since it's the variant being used,
    and it's more specific than just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-mistune: new package

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - rename the .mk file to carry the proper name
 - rewrap Config.in help text to use the proper length and avoid a
   trailing space
 - remove excessive empty new line at the end of Config.in
 - specify BSD-3c as the license, since it's the variant being used,
   and it's more specific than just BSD.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-click: new package

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
 - rewrap Config.in help text, lines were slightly too long
 - remove excessive empty line at end of Config.in
 - specify BSD-3c as the license, since BSD is not specific enough.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-cbor: new package

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kodi, mpd: fix samba4 related dependency mistakes

This commit fixes the following kconfig warning:

   warning: (BR2_PACKAGE_KODI_LIBSMBCLIENT && BR2_PACKAGE_MPD_LIBSMBCLIENT) selects BR2_PACKAGE_SAMBA4 which has unmet direct dependencies (!BR2_PACKAGE_SAMBA && BR2_USE_MMU && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_NATIVE_RPC && BR2_TOOLCHAIN_HAS_THREADS && !BR2_STATIC_LIBS && !BR2_nios2)

by updating the kodi and mpd Config.in files to properly take into
account the dependencies of the BR2_PACKAGE_SAMBA4 option that they
select.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>