gdb: add type::index_type / type::set_index_type

Add the `index_type` and `set_index_type` methods on `struct type`, in
order to remove the `TYPE_INDEX_TYPE` macro.  In this patch, the
`TYPE_INDEX_TYPE` macro is changed to use `type::index_type`, so all the
call sites that are used to set the type's index type are changed to use
`type::set_index_type`.  The next patch will remove `TYPE_INDEX_TYPE`
completely.

gdb/ChangeLog:

* gdbtypes.h (struct type) <index_type, set_index_type>: New
methods.
(TYPE_INDEX_TYPE): Use type::index_type.
* gdbtypes.c (create_array_type_with_stride): Likewise.

Change-Id: I93bdca9de9f3e143d2ccea59310c63745315e18d

[PATCH] arm: Add DFB instruction for ARMv8-R

gas/ChangeLog:
2020-06-08  Alex Coplan  <alex.coplan@arm.com>

* config/tc-arm.c (insns): Add dfb.
* testsuite/gas/arm/dfb.d: New test.
* testsuite/gas/arm/dfb.s: Input for test.

opcodes/ChangeLog:
2020-06-08  Alex Coplan  <alex.coplan@arm.com>

* arm-dis.c (arm_opcodes): Add dfb.
(thumb32_opcodes): Add dfb.

ELF: Move tlsdesc_plt/tlsdesc_got to elf_link_hash_table

All ELF backends with TLS descriptor support have

  /* The offset into splt of the PLT entry for the TLS descriptor
     resolver.  Special values are 0, if not necessary (or not found
     to be necessary yet), and -1 if needed but not determined
     yet.  */
  bfd_vma tlsdesc_plt;

  /* The GOT offset for the lazy trampoline.  Communicated to the
     loader via DT_TLSDESC_GOT.  The magic value (bfd_vma) -1
     indicates an offset is not allocated.  */
  bfd_vma tlsdesc_got;

in symbol hash entry.  Move tlsdesc_plt/tlsdesc_got to elf_link_hash_entry
to reduce code duplication.

* elf-bfd.h (elf_link_hash_entry): Add tlsdesc_plt and
tlsdesc_got.
* elf32-arm.c (elf32_arm_link_hash_table): Remove tlsdesc_plt
and dt_tlsdesc_got.
(elf32_arm_size_dynamic_sections): Updated.  Clear
root.tlsdesc_plt for DF_BIND_NOW.
(elf32_arm_finish_dynamic_sections): Updated.
(elf32_arm_output_arch_local_syms): Likewise.
* elf32-nds32.c (nds32_elf_size_dynamic_sections): Updated.
Clear root.tlsdesc_plt for DF_BIND_NOW.
(nds32_elf_finish_dynamic_sections): Updated.
* elf32-nds32.h (elf_nds32_link_hash_table): Remove
dt_tlsdesc_plt and dt_tlsdesc_got.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Updated.
* elfnn-aarch64.c (elf_aarch64_link_hash_table): Remove
tlsdesc_plt and dt_tlsdesc_got.
(elfNN_aarch64_allocate_dynrelocs): Updated.
(elfNN_aarch64_finish_dynamic_sections): Likewise.
(elfNN_aarch64_size_dynamic_sections): Updated.  Clear
root.tlsdesc_plt for DF_BIND_NOW.  Don't check DF_BIND_NOW
twice.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Updated.
(_bfd_x86_elf_size_dynamic_sections): Likewise.
(_bfd_x86_elf_finish_dynamic_sections): Likewise.
* elfxx-x86.h (elf_x86_link_hash_table): Remove tlsdesc_plt and
tlsdesc_got.

Fix a typo in the description of the strings program.

PR 26093
* doc/binutils.texi (strings): Fix typo.

Fix an illegal memory access when parsing corrupt DWARF debug information.

PR 26086
* dwarf.c (process_debug_info): Check that there is space in the
debug_information array before filling in an entry.

Fix a gas testsuite failure for PE based targets which cannot assemble the cfi-i386-2 test.

* testsuite/gas/cfi/cfi-i386-2.d: Skip for PE based targets.

x86: also handle %k<N> and %bnd<N> in debugging helpers

Adjustment of this function was missed when support for the respective
registers was added.

x86: simplify check_byte_reg()

With the introduction of what right now is the very first conditional
in the function's loop (commit dc821c5f9ae5 ["x86: replace Reg8, Reg16,
Reg32, and Reg64"]), the last if() in the same loop has become
pointless - retain just its body.

x86: restrict %tr<N> visibility

First of all, these registers have never been available on any 64-bit
CPU, and hence should not be recognized in 64-bit mode. But even before
that they had already disappeared - also don't recognize them when 586
or 686 architectures were explicitly set.

ix86: enable 2nd CFI test

While putting together the previous patch I noticed that this test,
forever since its introduction, was dead. Update it so it will pass,
and enable it.

x86: also allow %st(N) in CFI directives

In 0e0eea782025 ("x86: x87-related adjustments") I screwed up CFI
directives with FPU support disabled, by moving the conditional there
across a check of "allow_pseudo_reg". Add the missing check.

x86: restrict use of register aliases

Register aliases (created e.g. via .set) check their target register at
the time of creation of the alias. While this makes sense, it's not
enough: The underlying register must also be "visible" at the time of
use. Wrong use of such aliases would lead to internal errors in e.g.
add_prefix() or build_modrm_byte().

Split the checking part of parse_real_register() into a new helper
function and use it also from the latter part of parse_register() (at
the same time replacing a minor open coded part of it).

Since parse_register() returning NULL already has a meaning, a fake new
"bad register" indicator gets added, which all callers need to check
for.

Automatic date update in version.in

elf32-tic6x.c: Define the default elf32_bed to elf32_tic6x_bed

Get

00000000000007c0 d elf32_tic6x_bed
0000000000000000 d elf32_tic6x_elf_bed
00000000000003e0 d elf32_tic6x_linux_bed

instead of

00000000000007c0 d elf32_bed
0000000000000000 d elf32_tic6x_elf_bed
00000000000003e0 d elf32_tic6x_linux_bed

* elf32-tic6x.c (elf32_bed): Defined the default to
elf32_tic6x_bed.

ld: Pass $LFLAGS to PR ld/21703 shared test

$LFLAGS is needed for -shared test.  This fixes

FAIL: PR ld/21703 shared

for tic6x-*-elf.

* testsuite/ld-elf/shared.exp: Pass $LFLAGS to PR ld/21703
shared test.

ld: Xfail pr20995 and pr20995-2 for tic6x-*-*

Xfail pr20995 and pr20995-2 for tic6x-*-* since GNU_RELRO is not
supported.

* testsuite/ld-elf/shared.exp: Xfail pr20995/pr20995-2 for
tic6x-*-*.

pr11304.d: Skip tic6x-*-elf

Since address 0x800000 overlaps with .heap section on tic6x-*-elf, skip
pr11304.d on tic6x-*-elf.

* testsuite/ld-elf/pr11304.d: Skip tic6x-*-elf.

elf64-hppa: Replace plt_sec/plt_rel_sec with root.splt/root.srelplt

elf64-hppa should use root.splt and root.srelplt instead of plt_sec and
plt_rel_sec so that elflink.c can see splt and srelplt.  This fixed:

FAIL: ld-elf/pr19539

* elf64-hppa.c (elf64_hppa_link_hash_table): Remove plt_sec and
plt_rel_sec.
(elf64_hppa_check_relocs): Replace plt_sec/plt_rel_sec with
root.splt/root.srelplt.
(elf64_hppa_create_dynamic_sections): Likewise.
(elf64_hppa_size_dynamic_sections): Likewise.
(elf64_hppa_finish_dynamic_symbol): Likewise.
(elf_hppa_final_link): Likewise.
(elf_hppa_final_link_relocate): Likewise.

Remove unused parameter from generic_val_print_float

generic_val_print_float has an "embedded_offset" parameter, but it can
only ever be 0.  I believe it is a leftover from the val_print
removal.  This patch removes this parameter.

gdb/ChangeLog
2020-06-07  Tom Tromey  <tom@tromey.com>

* valprint.c (generic_val_print_float): Remove "embedded_offset"
parameter.
(generic_value_print): Update.

Remove is_vxworks from _bfd_sparc_elf_link_hash_table

Replace is_vxworks with elf.target_os == is_vxworks.

* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Updated.
* elfxx-sparc.h (_bfd_sparc_elf_link_hash_table): Remove
is_vxworks.

Automatic date update in version.in

ELF: Add target_os to elf_link_hash_table/elf_backend_data

Add target_os to elf_backend_data to identify target OS.  Add target_os,
to elf_link_hash_table to identify target OS for linker output.

* elf-bfd.h (elf_target_os): New.
(elf_link_hash_table): Add target_os.
(elf_backend_data): Add target_os.
* elf32-arm.c (elf32_arm_link_hash_table): Remove vxworks_p,
symbian_p and nacl_p.
(create_got_section): Updated.
(elf32_arm_create_dynamic_sections): Likewise.
(arm_type_of_stub): Likewise.
(elf32_arm_create_or_find_stub_sec): Likewise.
(elf32_arm_allocate_plt_entry): Likewise.
(elf32_arm_populate_plt_entry): Likewise.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_finish_dynamic_sections): Likewise.
(elf32_arm_output_plt_map_1): Likewise.
(elf32_arm_output_arch_local_syms): Likewise.
(elf32_arm_add_symbol_hook): Likewise.
(elf32_arm_nacl_link_hash_table_create): Likewise.
(elf32_arm_vxworks_link_hash_table_create): Likewise.
(elf32_arm_symbian_link_hash_table_create): Likewise.
(ELF_TARGET_OS): New.
* elf32-i386.c (elf_i386_arch_bed): Removed.
(elf_backend_arch_data): Likewise.
(elf_i386_solaris_arch_bed): Likewise.
(elf_i386_nacl_arch_bed): Likewise.
(elf_i386_vxworks_arch_bed): Likewise.
(elf_i386_relocate_section): Updated.
(elf_i386_finish_dynamic_sections): Likewise.
(elf_i386_get_synthetic_symtab): Likewise.
(elf_i386_link_setup_gnu_properties): Likewise.
(ELF_TARGET_OS): New.
* elf32-mips.c (ELF_TARGET_OS): New.
* elf32-ppc.c (ppc_elf_link_hash_table): Remove is_vxworks.
(ppc_elf_create_got): Updated.
(ppc_elf_create_dynamic_sections): Likewise.
(ppc_elf_check_relocs): Likewise.
(ppc_elf_adjust_dynamic_symbol): Likewise.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_sections): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Likewise.
(ELF_TARGET_OS): New.
* elf32-sh.c (elf_sh_link_hash_table): Remove vxworks_p.
(sh_elf_link_hash_table_create): Updated.
(sh_elf_create_dynamic_sections): Likewise.
(allocate_dynrelocs): Likewise.
(sh_elf_size_dynamic_sections): Likewise.
(sh_elf_relocate_section): Likewise.
(sh_elf_finish_dynamic_symbol): Likewise.
(sh_elf_finish_dynamic_sections): Likewise.
(ELF_TARGET_OS): New.
* elf32-sparc.c (elf32_sparc_vxworks_link_hash_table_create):
Removed.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(ELF_TARGET_OS): New.
* elf64-x86-64.c (elf_x86_64_arch_bed): Removed.
(elf_x86_64_solaris_arch_bed): Likewise.
(elf_x86_64_nacl_arch_bed): Likewise.
(elf_x86_64_finish_dynamic_sections): Updated.
(elf_x86_64_get_synthetic_symtab): Likewise.
(elf_x86_64_link_setup_gnu_properties): Likewise.
(ELF_TARGET_OS): New.
* elflink.c (_bfd_elf_link_hash_table_init): Initialize
target_o.
* elfxx-mips.c (mips_elf_link_hash_table): Remove is_vxworks.
(MIPS_ELF_REL_DYN_NAME): Updated.
(ELF_MIPS_GP_OFFSET): Likewise.
(mips_elf_create_local_got_entry): Likewise.
(mips_elf_allocate_dynamic_relocations): Likewise.
(mips_elf_count_got_symbols): Likewise.
(is_gott_symbol): Likewise.
(mips_elf_calculate_relocation): Likewise.
(mips_elf_create_dynamic_relocation): Likewise.
(_bfd_mips_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_mips_elf_adjust_dynamic_symbol): Likewise.
(mips_elf_lay_out_got): Likewise.
(mips_elf_set_plt_sym_value): Likewise.
(_bfd_mips_elf_size_dynamic_sections): Likewise.
(_bfd_mips_elf_finish_dynamic_symbol): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Likewise.
(_bfd_mips_elf_final_link): Likewise.
(_bfd_mips_init_file_header): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_create_dynamic_sections):
Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
(_bfd_sparc_elf_finish_dynamic_symbol): Likewise.
(sparc_finish_dyn): Likewise.
(_bfd_sparc_elf_finish_dynamic_sections): Likewise.
* elfxx-target.h (ELF_TARGET_OS): New.
(elfNN_bed): Add ELF_TARGET_OS.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Updated.
(_bfd_x86_elf_link_hash_table_create): Likewise.
(_bfd_x86_elf_size_dynamic_sections): Likewise.
(_bfd_x86_elf_finish_dynamic_sections): Likewise.
(_bfd_x86_elf_adjust_dynamic_symbol): Likewise.
(_bfd_x86_elf_link_setup_gnu_properties): Likewise.
* elfxx-x86.h (elf_x86_target_os): Removed.
(elf_x86_backend_data): Likewise.
(get_elf_x86_backend_data): Likewise.
(elf_x86_link_hash_table): Remove target_os.

Power10 tidies

binutils/
* doc/binutils.texi (PowerPC -M option): Mention power10 and pwr10.
gas/
* config/tc-ppc.c (md_show_usage): Mention -mpower10 and -mpwr10.
* doc/c-ppc.texi: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Accept -mpwr10/-Mpwr10.

Rename PowerPC64 pcrel GOT TLS relocations

These relocations should have had REL in their names, to reflect the
fact that they are pc-relative.  Fix that now by adding _PCREL.
I've added some back-compatibility code to support anyone using
.reloc with the old relocations.

include/
* elf/ppc64.h (elf_ppc64_reloc_type): Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
bfd/
* reloc.c: Rename
BFD_RELOC_PPC64_GOT_TLSGD34 to BFD_RELOC_PPC64_GOT_TLSGD_PCREL34,
BFD_RELOC_PPC64_GOT_TLSLD34 to BFD_RELOC_PPC64_GOT_TLSLD_PCREL34,
BFD_RELOC_PPC64_GOT_TPREL34 to BFD_RELOC_PPC64_GOT_TPREL_PCREL34,
BFD_RELOC_PPC64_GOT_DTPREL34 to BFD_RELOC_PPC64_GOT_DTPREL_PCREL34.
* elf64-ppc.c: Update throughout for reloc renaming.
(ppc64_elf_reloc_name_lookup): Handle old reloc names.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c: Update throughout for reloc renaming.
elfcpp/
* powerpc.h: Rename
R_PPC64_GOT_TLSGD34 to R_PPC64_GOT_TLSGD_PCREL34,
R_PPC64_GOT_TLSLD34 to R_PPC64_GOT_TLSLD_PCREL34,
R_PPC64_GOT_TPREL34 to R_PPC64_GOT_TPREL_PCREL34, and
R_PPC64_GOT_DTPREL34 to R_PPC64_GOT_DTPREL_PCREL34.
gold/
* powerpc.cc: Update throughout for reloc renaming.

Re: PR13802, referred common symbol not UNDefined

It looks like this one was previously just swept under the rug.  Prior
to git commit c4b126b87a6c, the arm backend emitted an absolute
dynamic symbol "foo" with value zero for what was originally a common
symbol.  That was just wrong.

The patch also removes an xfail for bfin-linux-uclibc.

PR 13802
* testsuite/ld-elf/comm-data.exp: Don't xfail arm or bfin-linux.

ld -plugin options when plugins are disabled

This patch makes ld accept and ignore -plugin options when configured
with --disable-plugins.  The idea is to allow using a linker built
without plugin support with a gcc built with plugin support.  Quite
obviously such a combination won't work if using LTO, but gcc has a
habit of passing a bunch of -plugin and -plugin-opt arguments to ld
even when not generating or linking LTO objects.

Why do I want to do this?  Well, it lets me and other binutils
developers answer the question as to whether plugin support breaks
binutils in some areas.  Which it does for some targets.

* lexsup.c (ld_options): Accept -plugin and -plugin-opt when
!ENABLE_PLUGINS.
* testsuite/lib/ld-lib.exp (check_plugin_api_available): Adjust.

Automatic date update in version.in

Revert "gdb/python: Avoid use after free in py-tui.c"

This reverts commit 982a38f60b0ece9385556cff45567e06710478cb.

I missed that the title being assigned too was a std::string, and so
there is no leak.

gdb/python: Avoid use after free in py-tui.c

When setting the window title of a tui frame we do this:

  gdb::unique_xmalloc_ptr<char> value
    = python_string_to_host_string (<python-object>);
  ...
  win->window->title = value.get ();

The problem here is that 'get ()' only borrows the pointer from value,
when value goes out of scope the pointer will be freed.  As a result,
the tui frame will be left with a pointer to undefined memory
contents.

Instead we should be using 'value.release ()' to take ownership of the
pointer from value.

gdb/ChangeLog:

* python/py-tui.c (gdbpy_tui_set_title): Use release, not get, to
avoid use after free.

gas: avoid GCC 10 warning stringop-overflow in tc-bpf.c

The GAS struct frag ends with a field `fr_literal' whose purpose is to
mark the begining of the frag's data:

struct frag {
  ...
  /* Data begins here.  */
  char fr_literal[1];
};

The code in gas/config/tc-bpf.c recently committed:

where = fixP->fx_frag->fr_literal + fixP->fx_where;
where[1] = target_big_endian ? 0x01 : 0x10;

triggers the stringop-overflow warning in GCC 10+, since the compiler
assumes the size of the modified buffer is 1 byte.  This patch
slightly modifies the code to make tc-bpf.c buildable with GCC 10+.

2020-06-05  Jose E. Marchesi  <jose.marchesi@oracle.com>

* config/tc-bpf.c (md_apply_fix): Avoid GCC 10 warning
stringop-overflow.

bfin: Initialize picrel to silence GCC warning

bfin: Skip non SEC_ALLOC section

* elf32-bfin.c (bfinfdpic_relocate_section): Skip non SEC_ALLOC
section.

[gdb/NEWS] Fix typos

Fix a few typos in gdb/NEWS.

gdb/ChangeLog:

2020-06-05  Tom de Vries  <tdevries@suse.de>

* NEWS: Fix typos.

Fix a potential infinite loop in the Windows resource parser.

PR 26082
* mclex.c (yylex): Add test for an empty input stream.

Fix a use before initialization bug in the pdp11.c source file.

* pdp11.c (aout_link_add_symbols): Fix use before initialisation
bug.

bpf stack smashing detected

* cgen-dis.c (hash_insn_array): Increase size of buf.  Assert
size is large enough.

Fix unresolved test in binutils for pdp11.

* binutils/testsuite/binutils-all/pr25662-pdp11.s: Alternate source file
for test using section pseudo-ops compatible with pdp11.
* binutils/testsuite/binutils-all/objcopy.exp: Select alternate source.

RISC-V: The object without priv spec attributes can be linked with any object.

bfd/
* elfnn-riscv.c (riscv_merge_attributes): Add new boolean
priv_may_conflict, in_priv_zero and out_priv_zero to decide whether
the object can be linked according to it's priv attributes.  The object
without any priv spec attributes can be linked with others.  If the first
input object doesn't contain any priv attributes, then we need to copy
the setting from the next input one.  Also report more detailed error
messages to user.

ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Rename to
attr-merge-priv-spec-01.d.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-c.s: Set priv spec
to 1.11.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-d.s: Empty priv spec
setting.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-02.d: New testcase.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.

RISC-V: Don't generate the ELF privilege attributes when no CSR are used.

gas/
* config/tc-riscv.c (explicit_csr): New static boolean.
Used to indicate CSR are explictly used.
(riscv_ip): Set explicit_csr to TRUE if any CSR is used.
(riscv_write_out_attrs): If we already have set elf priv
attributes, then generate them.  Otherwise, don't generate
them when no CSR are used.

* testsuite/gas/riscv/attribute-01.d: Remove the priv attributes.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-11.s: New testcase.
* testsuite/gas/riscv/attribute-11.d: New testcase.  The CSR is
used, so we should output the ELF priv attributes.
* testsuite/gas/riscv/attribute-12.d: New testcase.  The CSR is
used, so output the priv attributes according to the -mpriv-spec.
* testsuite/gas/riscv/attribute-13.d: New testcase.  The CSR isn't
used, so ignore the -mpriv-spec setting.

ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
* testsuite/ld-riscv-elf/call-relax.d: Add -mno-arch-attr.

Extend pdp11-aout symbol table format and code for .stab symbols.

* bfd/pdp11.c (pdp11_external_nlist): Repurposed e_unused to e_desc.
(N_STAB, is_stab): Needed new function is_stab to disambiguate
normal vs. .stab symbol table type values, replacing N_STAB mask.
(translate_from_native_sym_flags): Determine correct section for
different .stab types.
(translate_to_native_sym_flags): Leave .stab types intact.
(translate_symbol_table): Error if symbol indicates overlay;
store desc field from .stab symbols.
(write_syms): Output desc field with symbol.
(aout_link_check_ar_symbols): Skip .stab symbols.
(aout_link_add_symbols): Correctly distinguish .stab symbols.
(aout_link_write_other_symbol): Write 0 for desk and ovly fields.
(aout_link_write_symbols): Write 0 for desk and ovly fields;
correctly distinguish .stab symbols and select calculate their
section and value; and copy desc and ovly fields from input symbol
to output symbol.

Automatic date update in version.in

Correct a comment.

* bfd/aoutx.h (translate_symbol_table): Comment had external and
internal swapped.
* bfd/pdp11.c (translate_symbol_table): Likewise.

gas: Fix ip2k-elf and xstormy16-elf build

Fix ip2k-elf and xstormy16-elf build due to

commit e9bffec9afc45cf7c49308f0b4b8cc6bf68f58f2
Author: Jose E. Marchesi <jose.marchesi@oracle.com>
Date:   Thu Jun 4 16:15:53 2020 +0200

    opcodes: discriminate endianness and insn-endianness in CGEN ports

* config/tc-ip2k. (ip2k_apply_fix): Pass endianness to
cgen_get_insn_value.
* config/tc-xstormy16.c (xstormy16_md_apply_fix): Pass
endianness to cgen_get_insn_value and cgen_put_insn_value.

gdb: really share partial symtabs when using .gdb_index or .debug_names

Fix/follow-up to commit 17ee85fc2a ("Share DWARF partial symtabs").

In the non-index case, where GDB builds partial symbols from scratch,
two objfiles around the same BFD correctly share partial symtabs.  The
first objfile, which has to do all the work, saves a reference to the
created partial symtabs in the shared per_bfd object (at the end of
dwarf2_build_psymtabs).  The second objfile, when it reaches
dwarf2_build_psymtabs, sees that there are already partial symtabs built
for this BFD and just uses it.

However, that commit missed implementing the same sharing for cases
where GDB uses .gdb_index or .debug_names to build the partial symtabs.

This patch fixes it by having the first objfile to use the BFD set
per_bfd->partial_symtabs at the end of dwarf2_read_gdb_index /
dwarf2_read_debug_names.  For the subsequent objfiles using that BFD,
the partial symtabs are then picked up in dwarf2_initialize_objfile.

This patch adds a test that mimics how the issue was originally
triggered:

  1. Load the test file twice, such that the second objfile re-uses the
     per_bfd object created for the first objfile.
  2. Run to some point where in the backtrace there is a frame for a
     function that's in a CU that's not yet read in.
  3. Check that this frame's information is complete in the "backtrace"
     output.

Step 2 requires an address -> symbol lookup which uses the addrmap at
objfile->partial_symtabs->psymtabs_addrmap.  If the
objfile->partial_symtabs link is not properly setup (as is the case
before this patch), the symbol for that frame won't be found and we'll
get a frame with incomplete information.

The test fails without the fix when using boards "cc-with-gdb-index" and
"cc-with-debug-names".

gdb/ChangeLog:

* dwarf2/read.c (dwarf2_read_gdb_index): Save partial_symtabs in
the per_bfd object.
(dwarf2_read_debug_names): Likewise.
(dwarf2_initialize_objfile): Use partial_symtabs from per_bfd
object when re-using a per_bfd object with an index.

gdb/testsuite/ChangeLog:

* gdb.dwarf2/share-psymtabs-bt.exp: New file.
* gdb.dwarf2/share-psymtabs-bt.c: New file.
* gdb.dwarf2/share-psymtabs-bt-2.c: New file.

Change-Id: Ibb26210e2dfc03b80ba9fa56b875ba4cc58c0352

x86: Remove target_id from elf_x86_link_hash_table

Since target_id in elf_x86_link_hash_table is the same as hash_table_id
in elf_link_hash_table, we can use elf.hash_table_id instead of target_id.

* elfxx-x86.h (elf_x86_link_hash_table): Remove target_id.
(is_x86_elf): Check elf.hash_table_id instead of target_id.
* elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Updated.

[gdb/testsuite] Remove path names from error messages in gdb_file_cmd

In gdb_file_cmd, perror is called with error message strings using $arg and
$GDB, both of which contain path names, which makes comparison of gdb.sum
files more difficult.

Fix this by using:
- [file tail $arg] instead of $arg
- GDB instead of $GDB.

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-04  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_file_cmd): Avoid path names in error messages.

gas: simplify code in tc-bpf.c:md_apply_fix

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* config/tc-bpf.c (md_apply_fix): Simplify and avoid using
cgen_put_insn_value.

[gdb/testsuite] Fix error handling in gdb_file_cmd

Consider a gdb_load patch to call the gdb_file_cmd twice:
...
 proc gdb_load { arg } {
     if { $arg != "" } {
+       set res [gdb_file_cmd $arg]
+       if { $res != 0 } {
+           return $res
+       }
        return [gdb_file_cmd $arg]
     }
     return 0
 }
...

When running test-case gdb.base/index-cache.exp, we run into:
...
ERROR: Couldn't load outputs/gdb.base/index-cache/index-cache, other program \
  already loaded (timeout).
FAIL: gdb.base/index-cache.exp: test_cache_enabled_miss: check index-cache \
  stats (GDB internal error)
ERROR: Couldn't load outputs/gdb.base/index-cache/index-cache, other program \
  already loaded (timeout).
...

The first timeout in more detail:
...
(gdb) file outputs/gdb.base/index-cache/index-cache^M
Load new symbol table from "index-cache"? (y or n) y^M
Reading symbols from index-cache...^M
src/gdb/dwarf2/read.c:2540: internal-error: \
  void create_cus_from_index(dwarf2_per_bfd*, const gdb_byte*, offset_type, \
                             const gdb_byte*, offset_type): \
  Assertion `per_bfd->all_comp_units.empty ()' failed.^M
A problem internal to GDB has been detected,^M
further debugging may prove unreliable.^M
Quit this debugging session? (y or n) ERROR: Couldn't load index-cache, \
  other program already loaded (timeout).
...

Proc gdb_file_cmd has a gdb_expect handling the result of the file command,
and if the result is a "Load new symbol table from index-cache? (y or n) "
prompt, it sends a "y" and enters in a nested gdb_expect to handle the
result.

The first gdb_expect contains code to handle "A problem internal to GDB has
been detected", but the second one doesn't, which causes the timeout.

Fix this by removing the nested gdb_expect, and using exp_continue instead,
such that we have instead:
...
ERROR: Couldn't load outputs/gdb.base/index-cache/index-cache -- with new \
  symbol table into gdb (GDB internal error).
ERROR: Couldn't load outputs/gdb.base/index-cache/index-cache -- with new \
  symbol table into gdb (GDB internal error).
...

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-04  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_file_cmd): Replace incomplete gdb_expect by
exp_continue.

cpu,gas,opcodes: remove no longer needed workaround from the BPF port

cpu/ChangeLog:

2020-06-02  Jose E. Marchesi  <jose.marchesi@oracle.com>

* bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64.
* bpf.opc (bpf_print_insn): Do not set endian_code here.

gas/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
bpf_cgen_cpu_open.
(md_assemble): Remove no longer needed hack.

opcodes/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* disassemble.c (disassemble_init_for_target): Set endian_code for
bpf targets.
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.

opcodes: discriminate endianness and insn-endianness in CGEN ports

The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value.  These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.

The process of writing an instruction to the object file is:

  a) cgen_put_insn_value        ;; Writes out the opcodes.
  b) ARCH_cgen_insert_operand
       insert_normal
         insert_1
           cgen_put_insn_value  ;; Writes out the bytes of the
                                ;; operand.

Likewise, the process of reading an instruction from the object file
is:

  a) cgen_get_insn_value        ;; Reads the opcodes.
  b) ARCH_cgen_extract_operand
       extract_normal
         extract_1
           cgen_get_insn_value  ;; Reads in the bytes of the
                                ;; operand.

As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.

This is problematic for architectures in which the endianness of
instructions is different to the endianness of data.  An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.

This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate.  Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.

A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value.  It has been adapted to
  pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
  It has been adapted to pass the new endianargument.  Ditto for a
  call in the assembler.

Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.

include/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.

opcodes/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.

gas/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.

cpu/ChangeLog:

2020-06-02  Jose E. Marchesi  <jose.marchesi@oracle.com>

* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.

opcodes: support insn endianness in cgen_cpu_open

This patch adds support for a new CGEN_OPEN_INSN_ENDIAN argument
for @arch@_cgen_cpu_open.  This is useful for architectures in
which the endianness of the instruction words is not the same
than the endianness used for data.

An accompanying patch has been sent to the CGEN mailing list that
adds support for this argument on the CGEN side [1].  Its been
already pre-approved [2], and will be applied simultaneously with
this binutils series.

[1] https://sourceware.org/pipermail/cgen/2020q2/002733.html
[2] https://sourceware.org/pipermail/cgen/2020q2/002737.html

include/ChangeLog:

2020-06-04  Jose E. Marchesi  <jemarch@gnu.org>

* opcode/cgen.h (enum cgen_cpu_open_arg): New value
CGEN_CPU_OPEN_INSN_ENDIAN.

opcodes/ChangeLog:

2020-06-04  Jose E. Marchesi  <jemarch@gnu.org>

* cgen-dis.in (cpu_desc_list): New field `insn_endian'.
(print_insn_): Handle instruction endian.
* bpf-dis.c: Regenerate.
* bpf-desc.c: Regenerate.
* epiphany-dis.c: Likewise.
* epiphany-desc.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-desc.c: Likewise.
* frv-dis.c: Likewise.
* frv-desc.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-desc.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-desc.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-desc.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-desc.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-desc.c: Likewise.
* mep-dis.c: Likewise.
* mep-desc.c: Likewise.
* mt-dis.c: Likewise.
* mt-desc.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-desc.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-desc.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-desc.c: Likewise.

binutils/ChangeLog:

2020-06-04  Jose E. Marchesi  <jose.marchesi@oracle.com>

* objdump.c (disassemble_data): Set disasm_info.endian_code to
        disasm_info.endian after the latter is initialized to the
        endianness reported by BFD.

[gdb/testsuite] Fix use of fail in gdb_cmd_file

When building gdb using this patch:
...
 static void
 file_command (const char *arg, int from_tty)
 {
+  gdb_assert (0);
...
and running the testsuite, we run into:
...
Running src/gdb/testsuite/gdb.ada/O2_float_param.exp ...
PASS: gdb.ada/O2_float_param.exp: compilation foo.adb
FAIL: gdb.ada/O2_float_param.exp: (outputs/gdb.ada/O2_float_param/foo) \
  (GDB internal error)
PATH: gdb.ada/O2_float_param.exp: (outputs/gdb.ada/O2_float_param/foo) \
  (GDB internal error)
FAIL: gdb.ada/O2_float_param.exp: frame
...

The FAIL detecting the GDB internal error is generated by this clause in
gdb_file_cmd:
...
       -re "A problem internal to GDB has been detected" {
           fail "($arg) (GDB internal error)"
           gdb_internal_error_resync
           return -1
       }
...

The fail message has no text outside parenthesis, and could be considered
empty.  Also, it's the only clause in the gdb_expect that uses fail, the
rest uses perror.

Fix this by replacing the fail by perror, such that we have:
...
Running src/gdb/testsuite/gdb.ada/O2_float_param.exp ...
PASS: gdb.ada/O2_float_param.exp: compilation foo.adb
ERROR: Couldn't load outputs/gdb.ada/O2_float_param/foo into \
  gdb (GDB internal error).
UNRESOLVED: gdb.ada/O2_float_param.exp: frame
...

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-04  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_file_cmd): Use perror instead of fail.

ELF: Don't check relocations in non-loaded, non-alloced sections

Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.

Since check_relocs is no longer called on non-loaded, non-alloced
sections, remove SEC_ALLOC check.  Resolve relocation in debug section
against symbol defined in shared library to 0.

bfd/

PR ld/26080
* elf-m10300.c (mn10300_elf_relocate_section): Resolve relocation
in debug section against symbol defined in shared library to 0.
* elf32-i386.c (elf_i386_check_relocs): Remove SEC_ALLOC check.
* elf32-lm32.c (lm32_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-nds32.c (nds32_elf_check_relocs): Likewise.
* elf32-nios2.c (nios2_elf32_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Set non_got_ref for non-GOT
reference.
(elf_vax_adjust_dynamic_symbol): Generate a copy reloc only if
there is non-GOT reference.
* elflink.c (_bfd_elf_link_check_relocs): Skip non-loaded,
non-alloced sections.

ld/

PR ld/26080
* testsuite/ld-elf/comm-data.exp: Remove copy_reloc.
* testsuite/ld-elf/comm-data2r.rd: Removed.
* testsuite/ld-elf/comm-data2r.sd: Likewise.
* testsuite/ld-elf/comm-data2r.xd: Likewise.

tcl global directive outside proc body does nothing (gas)

* testsuite/config/default.exp: Remove global directive outside
proc body.
* testsuite/gas/mep/complex-relocs.exp: Likewise.
* testsuite/gas/microblaze/relax_size.exp: Likewise.
* testsuite/gas/microblaze/reloc_sym.exp: Likewise.
* testsuite/gas/mt/relocs.exp: Likewise.
* testsuite/gas/rx/rx.exp: Likewise.

tcl global directive outside proc body does nothing (binutils)

* testsuite/binutils-all/i386/i386.exp
* testsuite/binutils-all/x86-64/objects.exp
* testsuite/binutils-all/x86-64/x86-64.exp

tcl global directive outside proc body does nothing (ld)

* testsuite/config/default.exp: Remove global directive outside
proc body.
* testsuite/ld-bootstrap/bootstrap.exp: Likewise.
* testsuite/ld-elf/compress.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise.
* testsuite/ld-elf/exclude.exp: Likewise.
* testsuite/ld-elf/frame.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-frv/fdpic.exp: Likewise.
* testsuite/ld-frv/tls.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-powerpc/export-class.exp: Likewise.
* testsuite/ld-scripts/align.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/overlay-size.exp: Likewise.
* testsuite/ld-scripts/provide.exp: Likewise.
* testsuite/ld-scripts/weak.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/rd-sh.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.

ld-dynamic test fixes

* testsuite/ld-dynamic/export-dynamic-symbol-2.d: Match output for
mips-sgi-irix6.
* testsuite/ld-dynamic/export-dynamic-symbol-glob.d: Likewise.
* testsuite/ld-dynamic/export-dynamic-symbol-list-2.d: Likewise.
* testsuite/ld-dynamic/export-dynamic-symbol-list-glob.d: Likewise.
* testsuite/ld-dynamic/export-dynamic-symbol.exp: Exclude targets
with poor PIE support.

ld testsuite fails with default-PIE compiler

* testsuite/ld-plugin/lto.exp (pr12758.exe): Add NOPIE_LDFLAGS.
* testsuite/ld-unique/unique.exp: Add NOPIE_LDFLAGS to unique
executable and dynamic executable tests.

Correct PR number in changelog

Copy several years of fixes from bfd/aoutx.h to bfd/pdp11.c.

* pdp11.c (some_aout_object_p): 4c1534c7a2a - Don't set EXEC_P for
files with relocs.
(aout_get_external_symbols): 6b8f0fd579d - Return if count is zero.
0301ce1486b PR 22306 - Handle stringsize of zero, and error for any
other size that doesn't qcover the header word.
bf82069dce1 PR 23056 - Allocate an extra byte at the end of the
string table, and zero it.
(translate_symbol_table): 0d329c0a83a PR 22887 - Print an error
message and set bfd_error on finding an invalid name string offset.
(add_to_stringtab): INLINE -> inline
(pdp11_aout_swap_reloc_in): 116acb2c268 PR 22887 - Correct r_index
bound check.
(squirt_out_relocs): e2996cc315d PR 20921 - Check for and report
any relocs that could not be recognised.
92744f05809 PR 20929 - Check for relocs without an associated symbol.
(find_nearest_line):  808346fcfcf PR 23055 - Check that the symbol
name exists and is long enough, before attempting to see if it is
for a .o file.
c3864421222 - Correct case for N_SO being the last symbol.
50455f1ab29 PR 20891 - Handle the case where the main file name
and the directory name are both empty.
e82ab856bb4 PR 20892 - Handle the case where function name is empty.
(aout_link_add_symbols): e517df3dbf7 PR 19629 - Check for out of
range string table offsets.
531336e3a0b PR 20909 - Fix off-by-one error in check for an
illegal string offset.
(aout_link_includes_newfunc): Add comment.
(pdp11_aout_link_input_section): ad756e3f9e6 - Return with an error
on unexpected relocation type rather than ASSERT.

Automatic date update in version.in

[gdb/symtab] Fix missing breakpoint location for inlined function

Consider the test-case contained in this patch.

With -readnow, we have two breakpoint locations:
...
$ gdb -readnow -batch breakpoint-locs -ex "b N1::C1::baz" -ex "info break"
Breakpoint 1 at 0x4004cb: N1::C1::baz. (2 locations)
Num     Type           Disp Enb Address            What
1       breakpoint     keep y   <MULTIPLE>
1.1                         y   0x00000000004004cb in N1::C1::baz() \
                                                     at breakpoint-locs.h:6
1.2                         y   0x00000000004004f0 in N1::C1::baz() \
                                                     at breakpoint-locs.h:6
...

But without -readnow, we have instead only one breakpoint location:
...
$ gdb -batch breakpoint-locs -ex "b N1::C1::baz" -ex "info break"
Breakpoint 1 at 0x4004f0: file breakpoint-locs.h, line 6.
Num     Type           Disp Enb Address            What
1       breakpoint     keep y   0x00000000004004f0 in N1::C1::baz() \
                                                     at breakpoint-locs.h:6
...

The relevant dwarf is this bit:
...
 <0><d2>: Abbrev Number: 1 (DW_TAG_compile_unit)
    <d8>   DW_AT_name        : breakpoint-locs.cc
 <1><f4>: Abbrev Number: 2 (DW_TAG_namespace)
    <f5>   DW_AT_name        : N1
 <2><fe>: Abbrev Number: 3 (DW_TAG_class_type)
    <ff>   DW_AT_name        : C1
 <3><109>: Abbrev Number: 4 (DW_TAG_subprogram)
    <10a>   DW_AT_name        : baz
    <110>   DW_AT_linkage_name: _ZN2N12C13bazEv
 <2><116>: Abbrev Number: 5 (DW_TAG_subprogram)
    <117>   DW_AT_name        : foo
    <11d>   DW_AT_linkage_name: _ZN2N13fooEv
 <1><146>: Abbrev Number: 8 (DW_TAG_subprogram)
    <147>   DW_AT_specification: <0x116>
    <14b>   DW_AT_low_pc      : 0x4004c7
    <153>   DW_AT_high_pc     : 0x10
 <2><161>: Abbrev Number: 9 (DW_TAG_inlined_subroutine)
    <162>   DW_AT_abstract_origin: <0x194>
    <166>   DW_AT_low_pc      : 0x4004cb
    <16e>   DW_AT_high_pc     : 0x9
 <1><194>: Abbrev Number: 12 (DW_TAG_subprogram)
    <195>   DW_AT_specification: <0x109>
    <199>   DW_AT_inline      : 3       (declared as inline and inlined)
...

The missing breakpoint location is specified by DIE 0x161, which is ignored by
the partial DIE reader because it's a child of a DW_TAG_subprogram DIE (at
0x146, for foo).

Fix this by not ignoring the DIE during partial DIE reading.

Tested on x86_64-linux.

gdb/ChangeLog:

2020-06-03  Tom de Vries  <tdevries@suse.de>

PR symtab/26046
* dwarf2/read.c (scan_partial_symbols): Recurse into DW_TAG_subprogram
children for C++.
(load_partial_dies): Don't skip DW_TAG_inlined_subroutine child of
DW_TAG_subprogram.

gdb/testsuite/ChangeLog:

2020-06-03  Tom de Vries  <tdevries@suse.de>

PR symtab/26046
* gdb.cp/breakpoint-locs-2.cc: New test.
* gdb.cp/breakpoint-locs.cc: New test.
* gdb.cp/breakpoint-locs.exp: New file.
* gdb.cp/breakpoint-locs.h: New test.

* gas/doc/c-riscv.texi (RISC-V-Options): Fix non-ASCII apostrophe.

nios2: Call _bfd_elf_maybe_set_textrel to set DF_TEXTREL

Call _bfd_elf_maybe_set_textrel to set DF_TEXTREL by scanning dynamic
relocations in read-only section.

PR ld/26066
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Call
_bfd_elf_maybe_set_textrel to set DF_TEXTREL.

nios2: Don't check relocations in non-loaded, non-alloced sections

Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.

PR ld/26066
* elf32-nios2.c (nios2_elf32_check_relocs): Skip non-loaded,
non-alloced sections.

frv: Don't generate dynamic relocation for non SEC_ALLOC sections

Don't generate dynamic relocations for non SEC_ALLOC sections because
run-time loader won't process them.

* elf32-frv.c (elf32_frv_relocate_section): Don't generate
dynamic relocations for non SEC_ALLOC sections.

arc: Don't generate dynamic relocation for non SEC_ALLOC sections

Don't generate dynamic relocations for non SEC_ALLOC sections because
run-time loader won't process them.

* elf32-arc.c (elf_arc_relocate_section): Don't generate dynamic
relocations for non SEC_ALLOC sections.

[PATCH] fix windmc typedef bug

While a typedef can be specified in message files for the messages following
with the `MessageIdTypedef` directive, only the last typedef was honored by
windmc. This corrects this behavior, matching mc.exe functionality.

* windmc.h (struct mc_node): Add id_typecast field.
* mcparse.y (message): Initialise the id_typecast field.
* windmc.c (write_dbg): Use the id_typecast field as a parameter
when calling write_dbg_define.
(write_header): Likewise.

[gdb/testsuite] Fix use of verbose in gdb/jit-*.exp

When running the gdb/jit-*.exp tests with runtest -v, I get:
...
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf-so.exp: one_jit_test-1: maintenance print objfiles
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf-so.exp: one_jit_test-2: maintenance print objfiles
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf.exp: one_jit_test-1: maintenance print objfiles
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf.exp: one_jit_test-2: maintenance print objfiles
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf.exp: attach: one_jit_test-2: maintenance print objfiles
ERROR: internal buffer is full.
UNRESOLVED: gdb.base/jit-elf.exp: PIE: one_jit_test-1: maintenance print objfiles
FAIL: gdb.base/jit-reader.exp: jit-reader-load
FAIL: gdb.base/jit-reader.exp: with jit-reader: before mangling: bt works
FAIL: gdb.base/jit-reader.exp: with jit-reader: after mangling: bt works
FAIL: gdb.base/jit-reader.exp: with jit-reader again: jit-reader-load
FAIL: gdb.base/jit-reader.exp: with jit-reader again: bt
...

This is the consequence of the use of global verbose in these tests, which is
used to change the actual test, rather than be more verbose about it.

Fix this by defining a global test_verbose in each test, and using that
instead.

Tested on x86_64-linux using runtest -v.

gdb/testsuite/ChangeLog:

2020-06-03  Tom de Vries  <tdevries@suse.de>

PR testsuite/25609
* gdb.base/jit-elf-so.exp: Don't modify testing behaviour based on
value of global verbose.
* gdb.base/jit-elf.exp: Same.
* gdb.base/jit-reader.exp: Same.

Updated Serbian translation for the opcodes sub-directory

This patch set for the generic BFD a.out backend removes a dead #define and makes aoutx.h self-contained:  [PATCH 1/2]: bfd: remove unused NO_WRITE_HEADER_KLUDGE #define  [PATCH 2/2]: bfd: make aoutx.h self-contained

* aout64.c (BMAGIC, QMAGIC): Do not define.
* aoutx.h (N_IS_BMAGIC, N_SET_QMAGIC): New defines.
(NAME (aout, some_aout_object_p)): Use N_IS_QMAGIC and N_IS_BMAGIC
to check the file format.
(adjust_z_magic): Use N_SET_QMAGIC to set file format.
* i386aout.c (NO_WRITE_HEADER_KLUDGE): Delete define.
* libaout.h (NO_WRITE_HEADER_KLUDGE): Do not define.

ELF: Consolidate maybe_set_textrel

All maybe_set_textrel implementations are the same.  Consolidate them
to a single _bfd_elf_maybe_set_textrel.

* elf-bfd.h (_bfd_elf_maybe_set_textrel): New
* elf32-arm.c (maybe_set_textrel): Removed.
(elf32_arm_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-csky.c (maybe_set_textrel): Removed.
(csky_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-hppa.c (maybe_set_textrel): Removed.
(elf32_hppa_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-lm32.c (maybe_set_textrel): Removed.
(lm32_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-m32r.c (maybe_set_textrel): Removed.
(m32r_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-metag.c (maybe_set_textrel): Removed.
(elf_metag_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-nds32.c (maybe_set_textrel): Removed.
(nds32_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-or1k.c (maybe_set_textrel): Removed.
(or1k_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-ppc.c (maybe_set_textrel): Removed.
(ppc_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-s390.c (maybe_set_textrel): Removed.
(elf_s390_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-sh.c (maybe_set_textrel): Removed.
(sh_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-tic6x.c (maybe_set_textrel): Removed.
(elf32_tic6x_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf32-tilepro.c (maybe_set_textrel): Removed.
(tilepro_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf64-ppc.c (maybe_set_textrel): Removed.
(ppc64_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elf64-s390.c (maybe_set_textrel): Removed.
(elf_s390_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elfnn-aarch64.c (maybe_set_textrel): Removed.
(elfNN_aarch64_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elfnn-riscv.c (maybe_set_textrel): Removed.
(riscv_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elfxx-sparc.c (maybe_set_textrel): Removed.
(_bfd_sparc_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elfxx-tilegx.c (maybe_set_textrel): Removed.
(tilegx_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elfxx-x86.c (maybe_set_textrel): Removed.
(_bfd_x86_elf_size_dynamic_sections): Replace maybe_set_textrel
with _bfd_elf_maybe_set_textrel.
* elflink.c (_bfd_elf_maybe_set_textrel): New.

ELF: Copy dyn_relocs in _bfd_elf_link_hash_copy_indirect

Copy dyn_relocs in _bfd_elf_link_hash_copy_indirect instead of in each
target backend.

PR ld/26067
* elf32-arm.c (elf32_arm_copy_indirect_symbol): Don't copy
dyn_relocs.
* elf32-csky.c (csky_elf_copy_indirect_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_copy_indirect_symbol): Likewise.
* elf32-metag.c (elf_metag_copy_indirect_symbol): Likewise.
* elf32-microblaze.c (microblaze_elf_copy_indirect_symbol):
Likewise.
* elf32-nds32.c (nds32_elf_copy_indirect_symbol): Likewise.
* elf32-nios2.c (nios2_elf32_copy_indirect_symbol): Likewise.
* elf32-or1k.c (or1k_elf_copy_indirect_symbol): Likewise.
* elf32-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elf32-sh.c (sh_elf_copy_indirect_symbol): Likewise.
* elf32-tilepro.c (tilepro_elf_copy_indirect_symbol): Likewise.
* elf64-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_copy_indirect_symbol): Likewise.
* elfnn-riscv.c (riscv_elf_copy_indirect_symbol): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_copy_indirect_symbol): Likewise.
* elfxx-tilegx.c (tilegx_elf_copy_indirect_symbol): Likewise.
* elfxx-x86.c (_bfd_x86_elf_copy_indirect_symbol): Likewise.
* elf32-lm32.c (lm32_elf_copy_indirect_symbol): Removed.
(elf_backend_copy_indirect_symbol): Likewise.
* elf32-m32r.c (m32r_elf_copy_indirect_symbol): Removed.
(elf_backend_copy_indirect_symbol): Likewise.
* elflink.c (_bfd_elf_link_hash_copy_indirect): Copy dyn_relocs.

ELF: Consolidate readonly_dynrelocs

All readonly_dynrelocs implementations are the same.  Consolidate them
to a single _bfd_elf_readonly_dynrelocs.

PR ld/26067
* elf-bfd.h (_bfd_elf_readonly_dynrelocs): New.
* elf32-arm.c (readonly_dynrelocs): Removed.
(maybe_set_textrel): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
* elf32-csky.c (readonly_dynrelocs): Removed.
(maybe_set_textrel): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
*  elf32-hppa.c(readonly_dynrelocs): Removed.
(alias_readonly_dynrelocs): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-lm32.c (readonly_dynrelocs): Removed.
(lm32_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-m32r.c (readonly_dynrelocs): Removed.
(m32r_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-metag.c (readonly_dynrelocs): Removed.
(elf_metag_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-microblaze.c (readonly_dynrelocs): Removed.
(microblaze_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
* elf32-nds32.c (readonly_dynrelocs): Removed.
(nds32_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-or1k.c (readonly_dynrelocs): Removed.
(or1k_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
* elf32-ppc.c (readonly_dynrelocs): Removed.
(alias_readonly_dynrelocs): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
(ppc_elf_adjust_dynamic_symbol): Likewise.
(maybe_set_textrel): Likewise.
* elf32-s390.c (readonly_dynrelocs): Removed.
(elf_s390_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-sh.c (readonly_dynrelocs): Removed.
(sh_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf32-tic6x.c (readonly_dynrelocs): Removed.
(maybe_set_textrel): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
* elf32-tilepro.c (readonly_dynrelocs): Removed.
(tilepro_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elf64-ppc.c (readonly_dynrelocs): Removed.
(alias_readonly_dynrelocs): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
(maybe_set_textrel): Likewise.
* elf64-s390.c (readonly_dynrelocs): Removed.
(elf_s390_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elflink.c (_bfd_elf_readonly_dynrelocs): New.
* elfnn-aarch64.c (readonly_dynrelocs): Removed.
(maybe_set_textrel): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
* elfnn-riscv.c (readonly_dynrelocs): Removed.
(riscv_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elfxx-sparc.c (readonly_dynrelocs): Removed.
(_bfd_sparc_elf_adjust_dynamic_symbol): Replace
readonly_dynrelocs with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elfxx-tilegx.c (readonly_dynrelocs): Removed.
(tilegx_elf_adjust_dynamic_symbol): Replace readonly_dynrelocs
with _bfd_elf_readonly_dynrelocs.
(maybe_set_textrel): Likewise.
* elfxx-x86.c (readonly_dynrelocs): Removed.
(maybe_set_textrel): Replace readonly_dynrelocs with
_bfd_elf_readonly_dynrelocs.
(_bfd_x86_elf_adjust_dynamic_symbol): Likewise.

ld: Pass -fno-sanitize=all to tests with linker

When binutils is compiled with -fsanitize=undefined, many tests with
linker, instead of $CC, fail with undefined symbol references to sanitize
library.  Define NOSANTIZE_CFLAGS to -fno-sanitize=all if target compiler
supports it and compile such tests with $NOSANTIZE_CFLAGS.

* testsuite/config/default.exp (NOSANTIZE_CFLAGS): New.
* testsuite/ld-elf/linux-x86.exp: Add $NOSANTIZE_CFLAGS to
tests with run_ld_link_exec_tests.
* testsuite/ld-elf/shared.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Add $NOSANTIZE_CFLAGS to
tests with ld_link.
* testsuite/ld-gc/gc.exp: Add $NOSANTIZE_CFLAGS to cflags.
* testsuite/ld-plugin/lto.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.a
* testsuite/ld-plugin/plugin.exp: Append $NOSANTIZE_CFLAGS to
CFLAGS.
* testsuite/ld-selective/selective.exp: Add $NOSANTIZE_CFLAGS
to cflags and cxxflags.
* testsuite/ld-srec/srec.exp: Append $NOSANTIZE_CFLAGS to CC
and CXX.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Updated for
-fsanitize=undefined.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Add $NOSANTIZE_CFLAGS to
tests with run_cc_link_tests and run_ld_link_tests.

ld: Add --export-dynamic-symbol and --export-dynamic-symbol-list

--export-dynamic-symbol-list is like a dynamic list, but without
the symbolic property for unspecified symbols.

When creating an executable, --export-dynamic-symbol-list is treated
like --dynamic-list.

When creating a shared library, it is treated like --dynamic-list if
-Bsymbolic or --dynamic-list are used,  otherwise, it is ignored, so
that references to matched symbols will not be bound to the definitions
within the shared library.

PR ld/25910
* NEWS: Mention --export-dynamic-symbol[-list].
* ld.texi: Document --export-dynamic-symbol[-list].
* ldgram.y: Pass current_dynamic_list_p to
lang_append_dynamic_list.
* ldlang.c (current_dynamic_list_p): New.
(ang_append_dynamic_list): Updated to take a pointer to
struct bfd_elf_dynamic_list * argument instead of using
link_info.dynamic_list.
(lang_append_dynamic_list_cpp_typeinfo): Pass
&link_info.dynamic_list to ang_append_dynamic_list.
(lang_append_dynamic_list_cpp_new): Likewise.
* ldlang.h (current_dynamic_list_p): New.
(lang_append_dynamic_list): Add a pointer to
struct bfd_elf_dynamic_list * argument.
* ldlex.h (option_values): Add OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
* lexsup.c (ld_options): Add entries for
OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
(parse_args): Handle --export-dynamic-symbol and
--export-dynamic-symbol-list.
* testsuite/ld-dynamic/export-dynamic-symbol-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol.exp: New.
* testsuite/ld-dynamic/export-dynamic-symbol.s: New.
* testsuite/ld-dynamic/foo-bar.list: New.
* testsuite/ld-dynamic/foo.list: New.
* testsuite/ld-dynamic/foo.s: New.
* testsuite/ld-dynamic/fstar.list: New.
* testsuite/ld-elf/dlempty.list: New.
* testsuite/ld-elf/shared.exp: Add tests for
--export-dynamic-symbol and --export-dynamic-symbol-list.

x86: Silence -fsanitize=undefined

Replace "&(EH)->elf" with "(struct elf_link_hash_entry *) (EH)" to
silence -fsanitize=undefined.

* elfxx-x86.h (GENERATE_DYNAMIC_RELOCATION_P): Replace
"&(EH)->elf" with "(struct elf_link_hash_entry *) (EH)".

ld: fix ld-elf/linux-x86.exp for r/o source tree

Since the copying ofthe individual files gets done more than once, make
sure the destinations can be copied to on subsequent copying attempts.

PR26069, strip/objcopy misaligned address accesses

PR 26069
PR 18758
* peicode.h (pe_ILF_make_a_section): Align data for compilers
other than gcc.
(pe_ILF_build_a_bfd): Likewise.

PR26069, strip/objcopy memory leaks

PR 26069
* objcopy.c (copy_relocations_in_section): Free relpp on error.
Don't accidentally free isection->orelocation.

PR26069, strip/objcopy memory leaks

PR 26029
* elf.c (_bfd_elf_close_and_cleanup): Free elf_shstrtab for
core files as well as objects.

RISC-V: Fix minor bugs in .insn docs.

This fixes some minor bugs in the docs for the .insn directive pointed out
by Frédéric Pétrot, and I added a few more cleanups since I was changing
the docs.

gas/
PR 26051
* doc/c-riscv.texi (RISC-V-Formats): Add missing I format using
simm12(rs1).  Correct S format to use simm12(rs1).  Drop SB and B
formats using simm12(rs1).  Correct SB and B to use rs1 and rs2.
Move B before SB.  Move J before UJ.

RISC-V: Fix the error when building RISC-V linux native gdbserver.

The original report is as follow,
https://sourceware.org/pipermail/binutils/2020-June/111383.html

Inlcude the bfd.h in the include/opcode/riscv.h may cause gdbserver fail
to build.  I just want to use the `bfd_boolean` in the opcodes/riscv-opc.c,
but I didn't realize this cause the build failed.  Fortunately, I can also
use the `int` as the function return types just like others in the
opcodes/riscv-opc.c.

include/
* opcode/riscv.h: Remove #include "bfd.h".  And change the return
types of riscv_get_isa_spec_class and riscv_get_priv_spec_class
from bfd_boolean to int.

opcodes/
* riscv-opc.c (riscv_get_isa_spec_class): Change bfd_boolean to int.
(riscv_get_priv_spec_class): Likewise.

Automatic date update in version.in

gdb: Convert language skip_trampoline field to a method

This commit changes the language_data::skip_trampoline function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete skip_trampoline
initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::skip_trampoline): New member function.
(asm_language_data): Delete skip_trampoline initializer.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unk_lang_trampoline): Delete function.
(skip_language_trampoline): Update.
(unknown_language_data): Delete skip_trampoline initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete skip_trampoline field.
(language_defn::skip_trampoline): New function.
* m2-lang.c (m2_language_data): Delete skip_trampoline
initializer.
* objc-lang.c (objc_skip_trampoline): Delete function, move
implementation to objc_language::skip_trampoline.
(objc_language_data): Delete skip_trampoline initializer.
(objc_language::skip_trampoline): New member function with
implementation from objc_skip_trampoline.
* opencl-lang.c (opencl_language_data): Delete skip_trampoline
initializer.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_demangle field to a method

This commit changes the language_data::la_demangle function pointer
member variable into a member function of language_defn.

The only slightly "weird" change in this commit is in f-lang.c, where
I have given the Fortran language a demangle method that is identical
to the default language_defn::demangle.  The only reason for this is
to give me somewhere to copy the comment that was previously embedded
within the f_language_data structure.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_demangle initializer.
(ada_language::demangle): New member function.
* c-lang.c (c_language_data): Delete la_demangle initializer.
(cplus_language_data): Delete la_demangle initializer.
(cplus_language::demangle): New member function.
(asm_language_data): Delete la_demangle initializer.
(minimal_language_data): Delete la_demangle initializer.
* d-lang.c (d_language_data): Delete la_demangle initializer.
(d_language::demangle): New member function.
* f-lang.c (f_language_data): Delete la_demangle initializer.
(f_language::demangle): New member function.
* go-lang.c (go_language_data): Delete la_demangle initializer.
(go_language::demangle): New member function.
* language.c (language_demangle): Update.
(unk_lang_demangle): Delete.
(unknown_language_data): Delete la_demangle initializer.
(unknown_language::demangle): New member function.
(auto_language_data): Delete la_demangle initializer.
(auto_language::demangle): New member function.
* language.h (language_data): Delete la_demangle field.
(language_defn::demangle): New function.
* m2-lang.c (m2_language_data): Delete la_demangle initializer.
* objc-lang.c (objc_language_data): Delete la_demangle
initializer.
(objc_language::demangle): New member function.
* opencl-lang.c (opencl_language_data): Delete la_demangle
initializer.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.
(rust_language::demangle): New member functi

gdb: Convert language la_print_type field to a method

This commit changes the language_data::la_print_type function pointer
member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_print_type
initializer.
(ada_language::print_type): New member function.
* c-lang.c (c_language_data): Delete la_print_type initializer.
(c_language::print_type): New member function.
(cplus_language_data): Delete la_print_type initializer.
(cplus_language::print_type): New member function.
(asm_language_data): Delete la_print_type initializer.
(asm_language::print_type): New member function.
(minimal_language_data): Delete la_print_type initializer.
(minimal_language::print_type): New member function.
* d-lang.c (d_language_data): Delete la_print_type initializer.
(d_language::print_type): New member function.
* f-lang.c (f_language_data): Delete la_print_type initializer.
(f_language::print_type): New member function.
* go-lang.c (go_language_data): Delete la_print_type initializer.
(go_language::print_type): New member function.
* language.c (unk_lang_print_type): Delete.
(unknown_language_data): Delete la_print_type initializer.
(unknown_language::print_type): New member function.
(auto_language_data): Delete la_print_type initializer.
(auto_language::print_type): New member function.
* language.h (language_data): Delete la_print_type field.
(language_defn::print_type): New function.
(LA_PRINT_TYPE): Update.
* m2-lang.c (m2_language_data): Delete la_print_type initializer.
(m2_language::print_type): New member function.
* objc-lang.c (objc_language_data): Delete la_print_type
initializer.
(objc_language::print_type): New member function.
* opencl-lang.c (opencl_print_type): Delete, implementation moved
to opencl_language::print_type.
(opencl_language_data): Delete la_print_type initializer.
(opencl_language::print_type): New member function, implementation
from opencl_print_type.
* p-lang.c (pascal_language_data): Delete la_print_type
initializer.
(pascal_language::print_type): New member function.
* rust-lang.c (rust_print_type): Delete, implementation moved to
rust_language::print_type.
(rust_language_data): Delete la_print_type initializer.
(rust_language::print_type): New member function, implementation
from rust_print_type.

gdb: Convert language la_sniff_from_mangled_name field to a method

This commit changes the language_data::la_sniff_from_mangled_name
function pointer member variable into a member function of
language_defn.

Previously the la_sniff_from_mangled_name pointer was NULL for some
languages, however, all uses of this function pointer were through the
function language_sniff_from_mangled_name which provided a default
implementation.

This default implementation now becomes the implementation in the base
class language_defn, which is then overridden as required in various
language sub-classes.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_sniff_from_mangled_name): Delete function,
implementation moves to...
(ada_language::sniff_from_mangled_name): ...here.  Update return
type.
(ada_language_data): Delete la_sniff_from_mangled_name
initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::sniff_from_mangled_name): New member function,
implementation taken from gdb_sniff_from_mangled_name.
(asm_language_data): Delete la_sniff_from_mangled_name
initializer.
(minimal_language_data): Likewise.
* cp-support.c (gdb_sniff_from_mangled_name): Delete,
implementation moves to cplus_language::sniff_from_mangled_name.
* cp-support.h (gdb_sniff_from_mangled_name): Delete declaration.
* d-lang.c (d_sniff_from_mangled_name): Delete, implementation
moves to...
(d_language::sniff_from_mangled_name): ...here.
(d_language_data): Delete la_sniff_from_mangled_name initializer.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_sniff_from_mangled_name): Delete, implementation
moves to...
(go_language::sniff_from_mangled_name): ...here.
(go_language_data): Delete la_sniff_from_mangled_name initializer.
* language.c (language_sniff_from_mangled_name): Delete.
(unknown_language_data): Delete la_sniff_from_mangled_name
initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_sniff_from_mangled_name
field.
(language_defn::sniff_from_mangled_name): New function.
(language_sniff_from_mangled_name): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_sniff_from_mangled_name
field.
* objc-lang.c (objc_sniff_from_mangled_name): Delete,
implementation moves to...
(objc_language::sniff_from_mangled_name): ...here.
(objc_language_data): Delete la_sniff_from_mangled_name initializer.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_sniff_from_mangled_name): Delete,
implementation moves to...
(rust_language::sniff_from_mangled_name): ...here.
(rust_language_data): Delete la_sniff_from_mangled_name
initializer.
* symtab.c (symbol_find_demangled_name): Call
sniff_from_mangled_name member function.

gdb: Convert language la_search_name_hash field to a method

This commit changes the language_data::la_search_name_hash
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_search_name_hash
initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::search_name_hash): New member function.
(asm_language_data): Delete la_search_name_hash initializer.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* dictionary.c (default_search_name_hash): Rename to...
(language_defn::search_name_hash): ...this.
* f-lang.c (f_language_data): Likewise.
(f_language::search_name_hash): New member function.
* go-lang.c (go_language_data): Delete la_search_name_hash
initializer.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (struct language_data): Delete la_search_name_hash
field.
(language_defn::search_name_hash): Declare new member function.
(default_search_name_hash): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_search_name_hash
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.
* symtab.c (search_name_hash): Update call.

gdb: Convert language la_get_compile_instance field to a method

This commit changes the language_data::la_get_compile_instance
function pointer member variable into a member function of
language_defn.  Unlike previous commits converting fields of
language_data to member function in language_defn, this field is NULL
for some languages.  As a result I had to change the API slightly so
that the base language_defn class provides an implementation.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_get_compile_instance
initializer.
* c-lang.c (class compile_instance): Declare.
(c_language_data): Delete la_get_compile_instance initializer.
(c_language::get_compile_instance): New member function.
(cplus_language_data): Delete la_get_compile_instance initializer.
(cplus_language::get_compile_instance): New member function.
(asm_language_data): Delete la_get_compile_instance initializer.
(minimal_language_data): Likewise.
* c-lang.h (c_get_compile_context): Update comment.
(cplus_get_compile_context): Update comment.
* compile/compile.c (compile_to_object): Update calls, don't rely
on function pointer being NULL.
* d-lang.c (d_language_data): Delete la_get_compile_instance
initializer.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_get_compile_instance field.
(language_defn::get_compile_instance): New member function.
* m2-lang.c (m2_language_data): Delete la_get_compile_instance
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_iterate_over_symbols field to a method

This commit changes the language_data::la_iterate_over_symbols
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_add_all_symbols): Update comment.
(ada_iterate_over_symbols): Delete, move implementation to...
(ada_language::iterate_over_symbols): ...here, a new member
function, rewrite to use range based for loop.
(ada_language_data): Delete la_iterate_over_symbols initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_iterate_over_symbols field.
(language_defn::iterate_over_symbols): New member function.
(LA_ITERATE_OVER_SYMBOLS): Update.
* linespec.c (iterate_over_all_matching_symtabs): Update.
* m2-lang.c (m2_language_data): Delete la_iterate_over_symbols
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_lookup_transparent_type field to a method

This commit changes the language_data::la_lookup_transparent_type
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete
la_lookup_transparent_type initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::lookup_transparent_type): New member function.
(asm_language_data): Delete la_lookup_transparent_type
initializer.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (struct language_data): Delete
la_lookup_transparent_type field.
(language_defn::lookup_transparent_type): New member function.
* m2-lang.c (m2_language_data): Delete la_lookup_transparent_type
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.
* symtab.c (symbol_matches_domain): Update call.

gdb: Convert language la_language_arch_info field to a method

This commit changes the language_data::la_language_arch_info function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_arch_info): Delete function, move
implementation to...
(ada_language::language_arch_info): ...here, a new member
function.
(ada_language_data): Delete la_language_arch_info.
* c-lang.c (c_language_data): Likewise.
(c_language::language_arch_info): New member function.
(cplus_language_arch_info): Delete function, move
implementation to...
(cplus_language::language_arch_info): ...here, a new member
function.
(cplus_language_data): Delete la_language_arch_info.
(asm_language_data): Likewise.
(asm_language::language_arch_info): New member function.
(minimal_language_data): Delete la_language_arch_info.
(minimal_language::language_arch_info): New member function.
* d-lang.c (d_language_arch_info): Delete function, move
implementation to...
(d_language::language_arch_info): ...here, a new member
function.
(d_language_data): Delete la_language_arch_info.
* f-lang.c (f_language_arch_info): Delete function, move
implementation to...
(f_language::language_arch_info): ...here, a new member
function.
(f_language_data): Delete la_language_arch_info.
* go-lang.c (go_language_arch_info): Delete function, move
implementation to...
(go_language::language_arch_info): ...here, a new member
function.
(go_language_data): Delete la_language_arch_info.
* language.c (unknown_language_data): Likewise.
(unknown_language::language_arch_info): New member function.
(auto_language_data): Delete la_language_arch_info.
(auto_language::language_arch_info): New member function.
(language_gdbarch_post_init): Update call to
la_language_arch_info.
* language.h (language_data): Delete la_language_arch_info
function pointer.
(language_defn::language_arch_info): New function.
* m2-lang.c (m2_language_arch_info): Delete function, move
implementation to...
(m2_language::language_arch_info): ...here, a new member
function.
(m2_language_data): Delete la_language_arch_info.
* objc-lang.c (objc_language_arch_info): Delete function, move
implementation to...
(objc_language::language_arch_info): ...here, a new member
function.
(objc_language_data): Delete la_language_arch_info.
* opencl-lang.c (opencl_language_arch_info): Delete function, move
implementation to...
(opencl_language::language_arch_info): ...here, a new member
function.
(opencl_language_data): Delete la_language_arch_info.
* p-lang.c (pascal_language_arch_info): Delete function, move
implementation to...
(pascal_language::language_arch_info): ...here, a new member
function.
(pascal_language_data): Delete la_language_arch_info.
* rust-lang.c (rust_language_arch_info): Delete function, move
implementation to...
(rust_language::language_arch_info): ...here, a new member
function.
(rust_language_data): Delete la_language_arch_info.

gdb: Convert language la_pass_by_reference field to a method

This commit changes the language_data::la_pass_by_reference function
pointer member variable into a member function of language_defn.

The interesting thing in this commit is that I have removed the
default_pass_by_reference function entirely.  This function only ever
returned a language_pass_by_ref_info struct in its default state, so
all uses of this function can be replaced by just default
initialisation of a language_pass_by_ref_info variable.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_pass_by_reference
initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::pass_by_reference_info): New method.
(asm_language_data): Delete la_pass_by_reference initializer.
(minimal_language_data): Likewise.
* cp-abi.c (cp_pass_by_reference): Remove use of
default_pass_by_reference.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* gnu-v3-abi.c (gnuv3_pass_by_reference): Remove use of
default_pass_by_reference.
* go-lang.c (go_language_data): Likewise.
* language.c (language_pass_by_reference): Update.
(default_pass_by_reference): Delete.
(unknown_language_data): Delete la_pass_by_reference
initializer.
(auto_language_data): Likewise.
* language.h (struct language_data): Delete la_pass_by_reference
field.
(language_defn::pass_by_reference_info): New member function.
(default_pass_by_reference): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_pass_by_reference
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_read_var_value field to a method

This commit changes the language_data::la_read_var_value function
pointer member variable into a member function of language_defn.

An interesting aspect of this change is that the implementation of
language_defn::read_var_value is actually in findvar.c.  This is
partly historical, the new language_defn::read_var_value is a rename
of default_read_var_value, which was already in that file, but also,
that is the file that contains the helper functions needed by the
read_var_value method, so it makes sens that the method implementation
should continue to live there (I think).

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_read_var_value): Delete function, move
implementation to...
(ada_language::read_var_value): ...here.
(ada_language_data): Delete la_read_var_value initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* findvar.c (default_read_var_value): Rename to...
(language_defn::read_var_value): ...this.
* findvar.c (read_var_value): Update header comment, and change to
call member function instead of function pointer.
* go-lang.c (go_language_data): Likewise.
* language.c (unknown_language_data): Delete la_read_var_value
initializer.
(auto_language_data): Likewise.
* language.h (struct language_data): Delete la_read_var_value
field.
(language_defn::read_var_value): New member function.
(default_read_var_value): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_read_var_value
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.
* value.h (default_read_var_value): Delete declaration.

gdb: Convert language la_print_array_index field to a method

This commit changes the language_data::la_print_array_index function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_print_array_index): Delete function, move
implementation to...
(ada_language::print_array_index): ...here.
(ada_language_data): Delete la_print_array_index initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (default_print_array_index): Delete function, move
implementation to...
(language_defn::print_array_index): ...here.
(unknown_language_data): Delete la_print_array_index initializer.
(auto_language_data): Likewise.
* language.h (struct language_data): Delete la_print_array_index
field.
(language_defn::print_array_index): New member function.
(LA_PRINT_ARRAY_INDEX): Update.
(default_print_array_index): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_print_array_index
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Represent all languages as sub-classes of language_defn

This commit converts all languages to sub-classes of a language_defn
base class.

The motivation for this change is to make it easier to add new methods
onto languages without having to update all of the individual language
structures.  In the future it might be possible to move more things,
like expression parsing, into the language class(es) for better
encapsulation, however I have no plans to tackle this in the short
term.

This commit sets up a strategy for transitioning from the current
language system, where each language is an instance of the
language_defn structure, to the class hierarchy system.

The plan is to rename the existing language_defn into language_data,
and make this a base class for the new language_defn class, something
like this:

  struct language_data
  {
    ... old language_defn fields here ...
  };

  struct language_defn : public language_data
  {
    language_defn (const language_data d)
      : language_data (d)
    { .... }
  };

Then each existing language, for example ada_language_defn can be
converted into an instance of language_data, and passed into the
constructor of a new language class, something like this:

  language_data ada_language_data =
  {
    ... old ada_language_defn values here ...
  };

  struct ada_language : public language_defn
  {
    ada_language (ada_language_data)
    { .... }
  };

What this means is that immediately after the conversion nothing much
changes.  Every language is now its own class, but all the old
language fields still exist and can be accessed in the same way.

In later commits I will convert function pointers from the old
language_defn structure into real class methods on language_defn, with
overrides on sub-classes where needed.

At this point I imagine that those fields of the old language_defn
structure that contained only data will probably remain as data fields
within the new language_data base structure, it is only the methods
that I plan to change initially.

I tweaked how we manage the list of languages a bit, each language is
now registered as it is created, and this resulted in a small number
of changes in language.c.

Most of the changes in the *-lang.c files are identical.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* gdb/ada-lang.c (ada_language_defn): Convert to...
(ada_language_data): ...this.
(class ada_language): New class.
(ada_language_defn): New static global.
* gdb/c-lang.c (c_language_defn): Convert to...
(c_language_data): ...this.
(class c_language): New class.
(c_language_defn): New static global.
(cplus_language_defn): Convert to...
(cplus_language_data): ...this.
(class cplus_language): New class.
(cplus_language_defn): New static global.
(asm_language_defn): Convert to...
(asm_language_data): ...this.
(class asm_language): New class.
(asm_language_defn): New static global.
(minimal_language_defn): Convert to...
(minimal_language_data): ...this.
(class minimal_language): New class.
(minimal_language_defn): New static global.
* gdb/d-lang.c (d_language_defn): Convert to...
(d_language_data): ...this.
(class d_language): New class.
(d_language_defn): New static global.
* gdb/f-lang.c (f_language_defn): Convert to...
(f_language_data): ...this.
(class f_language): New class.
(f_language_defn): New static global.
* gdb/go-lang.c (go_language_defn): Convert to...
(go_language_data): ...this.
(class go_language): New class.
(go_language_defn): New static global.
* gdb/language.c (unknown_language_defn): Remove declaration.
(current_language): Initialize to nullptr, real initialization is
moved to _initialize_language.
(languages): Delete global.
(language_defn::languages): Define.
(set_language_command): Use language_defn::languages.
(set_language): Likewise.
(range_error): Likewise.
(language_enum): Likewise.
(language_def): Likewise.
(add_set_language_command): Use language_def::languages for the
language list, and language_def to lookup language pointers.
(skip_language_trampoline): Use language_defn::languages.
(unknown_language_defn): Convert to...
(unknown_language_data): ...this.
(class unknown_language): New class.
(unknown_language_defn): New static global.
(auto_language_defn): Convert to...
(auto_language_data): ...this.
(class auto_language): New class.
(auto_language_defn): New static global.
(language_gdbarch_post_init): Use language_defn::languages.
(_initialize_language): Initialize current_language.
* gdb/language.h (struct language_defn): Rename to...
(struct language_data): ...this.
(struct language_defn): New.
(auto_language_defn): Delete.
(unknown_language_defn): Delete.
(minimal_language_defn): Delete.
(ada_language_defn): Delete.
(asm_language_defn): Delete.
(c_language_defn): Delete.
(cplus_language_defn): Delete.
(d_language_defn): Delete.
(f_language_defn): Delete.
(go_language_defn): Delete.
(m2_language_defn): Delete.
(objc_language_defn): Delete.
(opencl_language_defn): Delete.
(pascal_language_defn): Delete.
(rust_language_defn): Delete.
* gdb/m2-lang.c (m2_language_defn): Convert to...
(m2_language_data): ...this.
(class m2_language): New class.
(m2_language_defn): New static global.
* gdb/objc-lang.c (objc_language_defn): Convert to...
(objc_language_data): ...this.
(class objc_language): New class.
(objc_language_defn): New static global.
* gdb/opencl-lang.c (opencl_language_defn): Convert to...
(opencl_language_data): ...this.
(class opencl_language): New class.
(opencl_language_defn): New static global.
* gdb/p-lang.c (pascal_language_defn): Convert to...
(pascal_language_data): ...this.
(class pascal_language): New class.
(pascal_language_defn): New static global.
* gdb/rust-exp.y (rust_lex_tests): Use language_def to find
language pointer, update comment format.
* gdb/rust-lang.c (rust_language_defn): Convert to...
(rust_language_data): ...this.
(class rust_language): New class.
(rust_language_defn): New static global.

[gdb/testsuite] Fix scrolling in gdb.dwarf2/multidictionary.exp

Consider a gdb_load patch to call the gdb_file_cmd twice:
...
 proc gdb_load { arg } {
     if { $arg != "" } {
+       set res [gdb_file_cmd $arg]
+       if { $res != 0 } {
+           return $res
+       }
        return [gdb_file_cmd $arg]
     }
     return 0
 }
...

With this patch, I run into:
...
(gdb) kill^M
The program is not being run.^M
(gdb) ^M</outputs/gdb.dwarf2/multidictionary/multidictionary^M
<.dwarf2/multidictionary/multidictionary"? (y or n)
ERROR: Couldn't load outputs/gdb.dwarf2/multidictionary/multidictionary \
  into gdb (timeout).
p 1^M
Please answer y or n.^M
<.dwarf2/multidictionary/multidictionary"? (y or n) n^M
Not confirmed.^M
(gdb) UNRESOLVED: gdb.dwarf2/multidictionary.exp: GDB is alive \
  (got interactive prompt)
...

The problem is that the second file command results in a prompt, which is
normally handled by gdb_file_cmd, but not recognized because the initial part
of the prompt is scrolled out.

This in turn is caused by using gdb_spawn_with_cmdline_opts without a
subsequent "set width 0".

Fix this by avoiding gdb_spawn_with_cmdline_opts, and forcing -readline by
temporarily modifying GDBFLAGS instead.

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-02  Tom de Vries  <tdevries@suse.de>

* gdb.dwarf2/multidictionary.exp: Don't use
gdb_spawn_with_cmdline_opts.

binutils archive tests

There are a number of targets that don't support thin archives (*),
and vms doesn't even support file name extensions other than .obj for
archives containing object files.  This patch adjusts the testsuite
to cater for the vms restriction, and reenables testing for non-ELF
alpha targets.  That adds a few alpha-dec-vms fails and one
alpha-linuxecoff fail but testsuite fails on those targets are nothing
new.

(*) It might seem like they do if binutils is built with
--enable-plugins but the plugin archive support is broken, causing the
wrong type of archives to be created by ar for those targets.

* testsuite/binutils-all/ar.exp (obj): Set up object file name
extension.  Use throughout.  Don't completely exclude non-ELF
alpha targets.  Run long_filenames test for tic30.  Exclude thin
archive tests for aix, ecoff and vms.
* estsuite/binutils-all/objdump.exp (obj): Set up object file name
extension.  Use throughout.  Don't exclude non-ELF alpha targets
from "bintest.a".

ELF: Move dyn_relocs to struct elf_link_hash_entry

All ELF backends with shared library support have

  /* Track dynamic relocs copied for this symbol.  */
  struct elf_dyn_relocs *dyn_relocs;

in symbol hash entry.  Move dyn_relocs to struct elf_link_hash_entry
to reduce code duplication.

PR ld/26067
* elf-bfd.h (elf_link_hash_entry): Add dyn_relocs after size.
* elf-s390-common.c (s390_elf_allocate_ifunc_dyn_relocs):
Updated.
* elf32-arc.c (elf_arc_link_hash_entry): Remove dyn_relocs.
(elf_arc_link_hash_newfunc): Updated.
* elf32-arm.c (elf32_arm_link_hash_entry): Remove dyn_relocs.
(elf32_arm_link_hash_newfunc): Updated.
(elf32_arm_copy_indirect_symbol): Likewise.
(elf32_arm_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
* elf32-csky.c (csky_elf_link_hash_entry): Remove dyn_relocs.
(csky_elf_link_hash_newfunc): Updated.
(csky_allocate_dynrelocs): Likewise.
(readonly_dynrelocs): Likewise.
(csky_elf_copy_indirect_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_link_hash_entry): Remove dyn_relocs.
(hppa_link_hash_newfunc): Updated.
(elf32_hppa_copy_indirect_symbol): Likewise.
(elf32_hppa_hide_symbol): Likewise.
(elf32_hppa_adjust_dynamic_symbol): Likewise.
(allocate_dynrelocs): Likewise.
(elf32_hppa_relocate_section): Likewise.
* elf32-i386.c (elf_i386_check_relocs): Likewise.
* elf32-lm32.c (elf_lm32_link_hash_entry): Removed.
(lm32_elf_link_hash_newfunc): Likewise.
(lm32_elf_link_hash_table_create): Updated.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
(lm32_elf_copy_indirect_symbol): Likewise.
* elf32-m32r.c (elf_m32r_link_hash_entry): Removed.
(m32r_elf_link_hash_newfunc): Likewise.
(m32r_elf_link_hash_table_create): Updated.
(m32r_elf_copy_indirect_symbol): Likewise.
(allocate_dynrelocs): Likewise.
* elf32-metag.c (elf_metag_link_hash_entry): Remove dyn_relocs.
(metag_link_hash_newfunc): Updated.
(elf_metag_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elf32-microblaze.c (elf32_mb_link_hash_entry): Remove
dyn_relocs.
(link_hash_newfunc): Updated.
(microblaze_elf_check_relocs): Likewise.
(microblaze_elf_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elf32-nds32.c (elf_nds32_link_hash_entry): Remove dyn_relocs.
(nds32_elf_link_hash_newfunc): Updated.
(nds32_elf_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
(nds32_elf_check_relocs): Likewise.
* elf32-nios2.c (elf32_nios2_link_hash_entry): Remove dyn_relocs.
(link_hash_newfunc): Updated.
(nios2_elf32_copy_indirect_symbol): Likewise.
(nios2_elf32_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
* elf32-or1k.c (elf_or1k_link_hash_entry): Remove dyn_relocs.
(or1k_elf_link_hash_newfunc): Updated.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
(or1k_elf_copy_indirect_symbol): Likewise.
* elf32-ppc.c (ppc_elf_link_hash_entry): Remove dyn_relocs.
(ppc_elf_link_hash_newfunc): Updated.
(ppc_elf_copy_indirect_symbol): Likewise.
(ppc_elf_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(ppc_elf_adjust_dynamic_symbol): Likewise.
(allocate_dynrelocs): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf32-s390.c (elf_s390_link_hash_entry): Remove dyn_relocs.
(link_hash_newfunc): Updated.
(elf_s390_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(elf_s390_adjust_dynamic_symbol): Likewise.
(allocate_dynrelocs): Likewise.
* elf32-sh.c (elf_sh_link_hash_entry): Remove dyn_relocs.
(sh_elf_link_hash_newfunc): Updated.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
(sh_elf_copy_indirect_symbol): Likewise.
(sh_elf_check_relocs): Likewise.
* elf32-tic6x.c (elf32_tic6x_link_hash_entry): Removed.
(elf32_tic6x_link_hash_newfunc): Likewise.
(elf32_tic6x_link_hash_table_create): Updated.
(readonly_dynrelocs): Likewise.
(elf32_tic6x_check_relocs): Likewise.
(elf32_tic6x_allocate_dynrelocs): Likewise.
* elf32-tilepro.c (tilepro_elf_link_hash_entry): Remove
dyn_relocs.
(link_hash_newfunc): Updated.
(tilepro_elf_copy_indirect_symbol): Likewise.
(tilepro_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
* elf64-ppc.c (ppc_link_hash_entry): Remove dyn_relocs.
(ppc64_elf_copy_indirect_symbol): Updated.
(ppc64_elf_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(ppc64_elf_adjust_dynamic_symbol): Likewise.
(dec_dynrel_count): Likewise.
(allocate_dynrelocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_link_hash_entry): Remove dyn_relocs.
(link_hash_newfunc): Updated.
(elf_s390_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfnn-aarch64.c (elf_aarch64_link_hash_entry): Remove
dyn_relocs.
(elfNN_aarch64_link_hash_newfunc): Updated.
(elfNN_aarch64_copy_indirect_symbol): Likewise.
(readonly_dynrelocs): Likewise.
(need_copy_relocation_p): Likewise.
(elfNN_aarch64_allocate_dynrelocs): Likewise.
(elfNN_aarch64_allocate_ifunc_dynrelocs): Likewise.
* elfnn-riscv.c (riscv_elf_link_hash_entry): Remove dyn_relocs.
(link_hash_newfunc): Updated.
(riscv_elf_copy_indirect_symbol): Likewise.
(riscv_elf_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_link_hash_entry): Remove
dyn_relocs.
(link_hash_newfunc): Updated.
(_bfd_sparc_elf_copy_indirect_symbol): Likewise.
(_bfd_sparc_elf_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elfxx-tilegx.c (tilegx_elf_link_hash_entry): Remove dyn_relocs.
(link_hash_newfunc): Updated.
(tilegx_elf_copy_indirect_symbol): Likewise.
(tilegx_elf_check_relocs): Likewise.
(readonly_dynrelocs): Likewise.
(allocate_dynrelocs): Likewise.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Likewise.
(readonly_dynrelocs): Likewise.
(_bfd_x86_elf_copy_indirect_symbol): Likewise.
* elfxx-x86.h (elf_x86_link_hash_entry): Remove dyn_relocs.