Teach readelf about IA64 MSB relocs.

* readelf.c (is_32bit_abs_reloc): Add R_IA64_SECREL32MSB and
R_IA64_DIR32MSB.
(is_64bit_abs_reloc): Add R_IA64_DIR64MSB.
(is_64bit_pcrel_reloc): Add R_IA64_PCREL64MSB.

Automatic date update in version.in

MIPS: Consistently use MIPS_FPU_TYPE for `gdbarch' member

Complement commit 74ed0bb4148e ("Replace current_gdbarch in *mips*"),
<https://sourceware.org/ml/gdb-patches/2008-06/msg00490.html>, and
consistently use the MIPS_FPU_TYPE macro to access the `->mips_fpu_type'
target-dependent `gdbarch' member.  No functional change.

gdb/
* mips-tdep.c (mips_gdbarch_init): Use MIPS_FPU_TYPE to access
`->mips_fpu_type'.

S/390: Fix claimfile failures

This fixes a segfault when trying to access the local_plt field in the
s390 specific elf data althoug the underlaying object is a generic elf
object.

This fixes the following testsuite failures:

< FAIL: plugin claimfile replace symbol with source
< FAIL: plugin claimfile resolve symbol with source
< FAIL: plugin claimfile replace file with source
< FAIL: plugin set symbol visibility with source
< FAIL: plugin ignore lib with source
< FAIL: plugin claimfile replace lib with source
< FAIL: plugin 2 with source lib
< FAIL: load plugin 2 with source
< FAIL: plugin 3 with source lib
< FAIL: load plugin 3 with source

bfd/ChangeLog:

2017-08-01  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf32-s390.c (elf_s390_finish_dynamic_sections): Skip if it
isn't the S/390 specific elf data.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.

x86: Update segment register check in Intel syntax

https://sourceware.org/ml/binutils/2009-04/msg00223.html

introduced a new Intel syntax parser which accepts

mov eax, fs:gs:[eax]

It ignores anything between ':'s after fs and treats

mov eax, DWORD PTR fs:foobar:16
mov eax, DWORD PTR fs:foobar:barfoo:16
mov eax, DWORD PTR fs:ds:16
mov eax, DWORD PTR fs:ds:cs:16

as

mov eax, DWORD PTR fs:16

This patch updates segment register check and only allows a single ':'.

PR gas/21874
* config/tc-i386-intel.c (i386_intel_operand): Update segment
register check.
* testsuite/gas/i386/intelok.s: Replace "fs:gs:[eax]" with
"fs:[eax]".
* testsuite/gas/i386/inval-seg.s: Add tests for invalid segment
register.
* testsuite/gas/i386/x86-64-inval-seg.s: Likewise.
* testsuite/gas/i386/inval-seg.l: Updated.
* testsuite/gas/i386/x86-64-inval-seg.l: Likewise.

Updated Swedish translation for the binutils sub-directory.

* po/sv.po: Updated Swedish translation.

[GOLD] PowerPC recreate eh_frame for stubs on each relax pass

There is a very small but non-zero probability that a stub group
contains stubs on one relax pass, but does not on the next.  In that
case we would get an FDE covering a zero length address range.
(Actually, it's even worse.  Alignment padding for stubs can mean the
address for the non-existent stubs is past the end of the original
section to which stubs are attached, and due to the way
do_plt_fde_location calculates the length we can get a negative
length.)  Fixing this properly requires removing the FDE.

Also, I have been implementing the __tls_get_addr_opt support for
gold, and that stub needs something other than the default FDE.  The
necessary FDE will depend on the offset to the __tls_get_addr_opt
stub, which of course can change during relaxation.  That means at the
very least, rewriting the FDE on each pass, possibly changing the FDE
size.  I think that is better done by completely recreating PLT
eh_frame FDEs.

* ehframe.cc (Fde::operator==): New.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): New.
* ehframe.h (Fde::operator==): Declare.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): Likewise.
* layout.cc (Layout::remove_eh_frame_for_plt): New.
* layout.h (Layout::remove_eh_frame_for_plt): Declare.
* powerpc.cc (Target_powerpc::do_relax): Remove old eh_frame FDEs.
(Stub_table::add_eh_frame): Delete eh_frame_added_ condition.
Don't add eh_frame for empty stub section.
(Stub_table::remove_eh_frame): New.

Automatic date update in version.in

Update myself in MAINTAINERS

Fix bb instructions with double-word condition on hppa.

Improve handling of ADD and SUB relocations on the RISCV target.

* elfxx-riscv.c (riscv_elf_add_sub_reloc): New function.
* (howto_table) [R_RISCV_ADD8]: Use riscv_elf_add_sub_reloc.
[R_RISCV_ADD16]: Likewise.
[R_RISCV_ADD32]: Likewise.
[R_RISCV_ADD64]: Likewise.
[R_RISCV_SUB6]: Likewise.
[R_RISCV_SUB8]: Likewise.
[R_RISCV_SUB16]: Likewise.
[R_RISCV_SUB32]: Likewise.
[R_RISCV_SUB64]: Likewise.

Fix compile time error when using ansidecl.h with an old version of GCC.

PR 21850
* ansidecl.h (OVERRIDE): Protect check of __cplusplus value with
#idef __cplusplus.

Update ChangeLog (missed that in my previous commit)

gdb/
        * ChangeLog: Add previous commit entry

Change-Id: Ic4f07cca66126e73340f032f19a2d5029bf0d40a

[GOLD] PowerPC --no-tls-optimize

This adds a --no-tls-optimize option for people who want to keep
__tls_get_addr calls in an executable rather than optimizing such code
sequences to IE/LE.

Also tidy some formatting errors, rename a variable to better reflect
its use, and tweak two functions that create pairs of GOT entries to
first check whether the GOT entry already exists before potentially
inserting the header via reserve(2).  Without the check it is possible
to waste one GOT entry.

* options.h (no_tls_optimize): New powerpc option.
* powerpc.cc (Target_powerpc::abiversion, set_abiversion): Formatting.
(Target_powerpc::stk_toc): Formatting, fix comment.
(Target_powerpc::Track_tls::tls_get_addr_state): Rename from
tls_get_addr.
(Target_powerpc::optimize_tls_gd, optimize_tls_ld, optimize_tls_ie):
Return TLSOPT_NONE when !tls_optimize.
(Target_powerpc::add_global_pair_with_rel): Check
for existing reloc before reserving.
(Target_powerpc::add_local_tls_pair): Likewise.

Fix compiling zlib using x86_64-musl.

PR 21861
* winduni.c (codepages): Use cp1252 for codepage 0.

Fix documentation about rot agent expression bytecode

The rot agent expression bytecode rotates the three items on the top of
the stack.  It is not clear which way the rotation is.  However, the
documentation currently shows this as the effect of the instructions:

   a b c => c b a

which doesn't make sense, since the value b doesn't move.  The two
valid possibilities I see are

  a b c => b c a
  a b c => c a b

depending on which way you rotate.

When looking at the gdbserver code, the top of the stack becomes the
third item, and the next-to-top item becomes the top.  So the second
form would be the right one, since in this notation the top of the stack
is the rightmost element:

  a b c => c a b

I adjusted the symbolic description and added a bit of text to make it
more obvious.

gdb/doc/ChangeLog:

* agentexpr.texi (rot): Fix symbolic description, improve
textual description.

darwin: handle recent version of dyld

gdb/
        * solib-darwin.c (DYLD_VERSION_MAX): Increase value.

Change-Id: I45da25f46b3e452d44993b122a994c818d00020b

PR 21847, PowerPC64 --plt-localentry again

This makes ld warn about --plt-localentry if a version of glibc
without the necessary ld.so checks is detected, and revises the
documentation.

bfd/
* elf64-ppc.c (ppc64_elf_tls_setup): Warn on --plt-localentry
without ld.so checks.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Warn on --plt-localentry
without ld.so checks.
ld/
* ld.texinfo (plt-localentry): Revise.

Automatic date update in version.in

Automatic date update in version.in

PR 21847, Don't default PowerPC64 to --plt-localentry

The big comment in ppc64_elf_tls_setup says why.  I've also added some
code to the bfd linker that catches the -lpthread -lc symbol
differences and disable generation of optimized call stubs even when
--plt-localentry is activated.  Gold doesn't yet have that.

PR 21847
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Add non_zero_localentry.
(ppc64_elf_merge_symbol): Set non_zero_localentry.
(is_elfv2_localentry0): Test non_zero_localentry.
(ppc64_elf_tls_setup): Default to --no-plt-localentry.
gold/
* powerpc.cc (Target_powerpc::scan_relocs): Default to
--no-plt-localentry.
ld/
* ld.texinfo (plt-localentry): Document.

Automatic date update in version.in

gold: Add put_ch_reserved to 64-bit Chdr_write

The 64-bit ELF compression header has a reserved field.  It should be
cleared to avoid random bits in it.

elfcpp/

PR gold/21857
* elfcpp.h (Chdr_write): Add put_ch_reserved.
(Chdr_write<64, true>::put_ch_reserved): New.
(Chdr_write<64, false>::put_ch_reserved): Likewise.

gold/

PR gold/21857
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Call put_ch_reserved to clear the reserved field for 64-bit ELF.

Add missing changelog

S/390: Fix segfault when linking -shared -nostartfiles

Regression-tested on s390x.

bfd/ChangeLog:

2017-07-28  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* elf32-s390.c (elf_s390_finish_dynamic_sections): Add NULL
pointer check for htab->elf.irelplt.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.

Make some improvements to how SORT_* specifiers and EXCLUDE_FILE specifiers are handled in the linker script grammar.

* ldgram.y (ldgram_had_keep): Make static.
(ldgram_vers_current_lang): Likewise.
(filename_spec): New rule.
(input_section_spec_no_keep): Use filename_spec.
(wildcard_maybe_exclude): New rule.
(wildcard_spec): Rename to...
(section_name_spec): ...this.
(section_NAME_list): Rename to...
(section_name_list): ...this.
(section_name_spec): Simplifiy and use wildcard_maybe_exclude.
* ldlang.c (placed_commons): Delete.
(lang_add_wild): No longer set placed_commons.
(print_wild_statement): Use full names for SORT specifiers.
* testsuite/ld-scripts/align.exp: Run new tests.
* testsuite/ld-scripts/align3.d: New file.
* testsuite/ld-scripts/align3.t: New file.
* testsuite/ld-scripts/align4.d: New file.
* testsuite/ld-scripts/align4.t: New file.
* testsuite/ld-scripts/align5.d: New file.
* testsuite/ld-scripts/align5.t: New file.
* testsuite/ld-scripts/exclude-file-5.d: New file.
* testsuite/ld-scripts/exclude-file-5.map: New file.
* testsuite/ld-scripts/exclude-file-5.t: New file.
* testsuite/ld-scripts/exclude-file-6.d: New file.
* testsuite/ld-scripts/exclude-file-6.map: New file.
* testsuite/ld-scripts/exclude-file-6.t: New file.
* NEWS: Mention the changes.

Fix problems parsing RISCV architecture extenstions in the assembler.

* config/tc-riscv.c (riscv_set_arch): Handle the Q subset like
all other subsets.
Obviate use-after-free.

Automatic date update in version.in

Add myself as a write-after-approval GDB maintainer.

gdb/Changelog:

2017-07-27  Xavier Roirand  <roirand@adacore.com>

        * MAINTAINERS (Write After Approval): Add Xavier Roirand.

Change-Id: Iee1dae7597da8f2c8c3098c14649ff400a81a388

Move AVR .promemx.* sections into higher memory.

PR ld/21849
* scripttempl/avr.sc: Split .progmemx.* from .progmem.* and locate
former at a higher address.

Fix address violation issues encountered when parsing corrupt binaries.

PR 21840
* mach-o.c (bfd_mach_o_read_symtab_strtab): Fail if the symtab
size is -1.
* nlmcode.h (nlm_swap_auxiliary_headers_in): Replace assertion
with error return.
* section.c (bfd_make_section_with_flags): Fail if the name or bfd
are NULL.
* vms-alpha.c (bfd_make_section_with_flags): Correct computation
of end pointer.
(evax_bfd_print_emh): Check for invalid string lengths.

Automatic date update in version.in

Gold: Fix mips.cc for GCC 4.2

GCC 4.2 fails to compile "(uint64_t) 0x800080008000" with

error: integer constant is too large for ‘long’ type

This patch adds "llu" suffix to 0x800080008000 for GCC 4.2.

* mips.cc (Mips_relocate_functions): Add "llu" suffix to
0x800080008000.

Add "maint check xml-descriptions" to test builtin xml target descriptions

Now, GDB is able to dynamically create i386-linux target descriptions
from features, instead of using pre-generated target descriptions.  These
pre-generated target descriptions are no longer used by GDB (note that
they are still used by GDBserver).

This patch add a new maint command "maint check xml-descriptions" to test
dynamically generated tdesc are identical to these generated from xml files.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* cli/cli-cmds.c (maintenancechecklist): New variable.
* gdbcmd.h (maintenancechecklist): Declare it.
* i386-linux-tdep.c (_initialize_i386_linux_tdep) [GDB_SELF_TEST]:
Call i386_linux_read_description with different masks.
* maint.c (maintenance_check_command): New function.
(_initialize_maint_cmds): Call add_prefix_cmd.
* target-descriptions.c (tdesc_reg): override operator != and ==.
(tdesc_type): Likewise.
(tdesc_feature): Likewise.
(target_desc): Likewise.
[GDB_SELF_TEST] (selftests::record_xml_tdesc): New function.
(maintenance_check_xml_descriptions): New function.
(_initialize_target_descriptions) Add command "xml-descriptions".
* target-descriptions.h (selftests::record_xml_tdesc): Declare.

gdb/testsuite:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.gdb/unittest.exp: Invoke command
"maintenance check xml-descriptions".

gdb/doc:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.texinfo (Maintenance Commands): Document command
"maint check xml-descriptions".

Lazily and dynamically create i386-linux target descriptions

Instead of using pre-generated target descriptions, this patch
changes GDB to lazily and dynamically create target descriptions
according to the target hardware capability (xcr0 in i386).
This support any combination of target features.

Some reg in target description has "regnum" attribute, so its register
number is got from the attribute value instead from sequential allocation.

  <reg name="xmm0" bitsize="128" type="vec128" regnum="32"/>

when target description is created, it should match the regnum, so this
patch adds a new field m_next_regnum to track it, if attribute number is
greater than the m_next_regnum, print the code to set register number
explicitly.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* i386-linux-tdep.c: Don't include features/i386/i386-*linux.c.
Include features/i386/32bit-*.c.
(i386_linux_read_description): Generate target description if it
doesn't exist.
(_initialize_i386_linux_tdep): Don't call _initialize_tdesc_i386
functions.
* features/i386/32bit-linux.c: Re-generated.
* features/i386/32bit-sse.c: Likewise.
* target-descriptions.c (print_c_feature::visit): Print code to
set register number if needed.
(print_c_feature) <m_next_regnum>: New field.

Generate c for feature instead of tdesc

This patch changes Makefile and command "maint print c-files" so
that GDB can print c files for features instead target description.
Previously, we feed GDB a target description xml file, which generate
c files including multiple features.

With this patch, in Makefile, we wrap each feature xml file, and
create a temp target description which include only one feature.
Then, adjust the target description printer for them, and print
a c function for each given feature, so that we can use these
c functions later to create target description in a flexible way.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* features/Makefile (CFILES): Rename with TDESC_CFILES.
(FEATURE_XMLFILES): New.
(FEATURE_CFILES): New.
New rules.
(clean-cfiles): Remove generated c files.
* features/i386/32bit-avx.c: Generated.
  * features/i386/32bit-avx512.c: Generated.
  * features/i386/32bit-core.c: Generated.
  * features/i386/32bit-linux.c: Generated.
  * features/i386/32bit-mpx.c: Generated.
  * features/i386/32bit-pkeys.c: Generated.
  * features/i386/32bit-sse.c: Generated.
  * target-descriptions.c: Include algorithm.
(tdesc_element_visitor): Add method visit_end.
(print_c_tdesc): Implement visit_end.
(print_c_tdesc:: m_filename_after_features): Move it to
protected.
(print_c_feature): New class.
(maint_print_c_tdesc_cmd): Use print_c_feature if XML file
name starts with "i386/32bit-".

Use visitor pattern for "maint print c-tdesc"

Target description can be modeled as a tree, the target description
is the root node, features are children nodes, registers and types are
grand-children nodes.  So command "maint print c-tdesc" in effect
traverse/visit each node, and print them in c.  This can be
implemented by visitor pattern, this is the first reason.  Secondly,
I want to this command prints c files in a different way for some
specific xml files, but still print c files the same way for the rest
of xml files.  Third, I even want to print xml files from target
descriptions, so that GDBserver can use it to reply GDB's query
qXfer:features:read:target.xml.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* target-descriptions.c (tdesc_element_visitor): New class.
(tdesc_element): New class.
(tdesc_reg): Inherit from tdesc_element.
(tdesc_reg::accept): New function.
(tdesc_type): Inherit from tdesc_element.
(tdesc_type::accept): New function.
(tdesc_feature): Inherit from tdesc_element.
(tdesc_feature::accept): New function.
(target_desc): Inherit from tdesc_element.
(target_desc::target_desc): New.
(target_desc::~target_desc): New.
(target_desc::accept): New.
(allocate_target_description): Use new.
(free_target_description): Use delete.
(print_c_tdesc): New class.
(maint_print_c_tdesc_cmd): Adjust.

* features/aarch64.c: Re-generated.
* features/arc-arcompact.c: Re-generated.
* features/arc-v2.c: Re-generated.
* features/arm/arm-with-iwmmxt.c: Re-generated.
* features/arm/arm-with-m.c: Re-generated.
* features/arm/arm-with-m-fpa-layout.c: Re-generated.
* features/arm/arm-with-m-vfp-d16.c: Re-generated.
* features/arm/arm-with-neon.c: Re-generated.
* features/arm/arm-with-vfpv2.c: Re-generated.
* features/arm/arm-with-vfpv3.c: Re-generated.
* features/i386/amd64-avx-avx512.c: Re-generated.
* features/i386/amd64-avx-avx512-linux.c: Re-generated.
* features/i386/amd64-avx.c: Re-generated.
* features/i386/amd64-avx-linux.c: Re-generated.
* features/i386/amd64-avx-mpx-avx512-pku.c: Re-generated.
* features/i386/amd64-avx-mpx-avx512-pku-linux.c: Re-generated.
* features/i386/amd64-avx-mpx.c: Re-generated.
* features/i386/amd64-avx-mpx-linux.c: Re-generated.
* features/i386/amd64.c: Re-generated.
* features/i386/amd64-linux.c: Re-generated.
* features/i386/amd64-mpx.c: Re-generated.
* features/i386/amd64-mpx-linux.c: Re-generated.
* features/i386/i386-avx-avx512.c: Re-generated.
* features/i386/i386-avx-avx512-linux.c: Re-generated.
* features/i386/i386-avx.c: Re-generated.
* features/i386/i386-avx-linux.c: Re-generated.
* features/i386/i386-avx-mpx-avx512-pku.c: Re-generated.
* features/i386/i386-avx-mpx-avx512-pku-linux.c: Re-generated.
* features/i386/i386-avx-mpx.c: Re-generated.
* features/i386/i386-avx-mpx-linux.c: Re-generated.
* features/i386/i386.c: Re-generated.
* features/i386/i386-linux.c: Re-generated.
* features/i386/i386-mmx.c: Re-generated.
* features/i386/i386-mmx-linux.c: Re-generated.
* features/i386/i386-mpx.c: Re-generated.
* features/i386/i386-mpx-linux.c: Re-generated.
* features/i386/x32-avx-avx512.c: Re-generated.
* features/i386/x32-avx-avx512-linux.c: Re-generated.
* features/i386/x32-avx.c: Re-generated.
* features/i386/x32-avx-linux.c: Re-generated.
* features/i386/x32.c: Re-generated.
* features/i386/x32-linux.c: Re-generated.
* features/microblaze.c: Re-generated.
* features/microblaze-with-stack-protect.c: Re-generated.
* features/mips64-dsp-linux.c: Re-generated.
* features/mips64-linux.c: Re-generated.
* features/mips-dsp-linux.c: Re-generated.
* features/mips-linux.c: Re-generated.
* features/nds32.c: Re-generated.
* features/nios2.c: Re-generated.
* features/nios2-linux.c: Re-generated.
* features/rs6000/powerpc-32.c: Re-generated.
* features/rs6000/powerpc-32l.c: Re-generated.
* features/rs6000/powerpc-403.c: Re-generated.
* features/rs6000/powerpc-403gc.c : Re-generated.
* features/rs6000/powerpc-405.c: Re-generated.
* features/rs6000/powerpc-505.c: Re-generated.
* features/rs6000/powerpc-601.c: Re-generated.
* features/rs6000/powerpc-602.c: Re-generated.
* features/rs6000/powerpc-603.c: Re-generated.
* features/rs6000/powerpc-604.c: Re-generated.
* features/rs6000/powerpc-64.c: Re-generated.
* features/rs6000/powerpc-64l.c: Re-generated.
* features/rs6000/powerpc-7400.c: Re-generated.
* features/rs6000/powerpc-750.c: Re-generated.
* features/rs6000/powerpc-860.c: Re-generated.
* features/rs6000/powerpc-altivec32.c: Re-generated.
* features/rs6000/powerpc-altivec32l.c: Re-generated.
* features/rs6000/powerpc-altivec64.c: Re-generated.
* features/rs6000/powerpc-altivec64l.c: Re-generated.
* features/rs6000/powerpc-cell32l.c: Re-generated.
* features/rs6000/powerpc-cell64l.c: Re-generated.
* features/rs6000/powerpc-e500.c: Re-generated.
* features/rs6000/powerpc-e500l.c: Re-generated.
* features/rs6000/powerpc-isa205-32l.c: Re-generated.
* features/rs6000/powerpc-isa205-64l.c: Re-generated.
* features/rs6000/powerpc-isa205-altivec32l.c: Re-generated.
* features/rs6000/powerpc-isa205-altivec64l.c: Re-generated.
* features/rs6000/powerpc-isa205-vsx32l.c: Re-generated.
* features/rs6000/powerpc-isa205-vsx64l.c: Re-generated.
* features/rs6000/powerpc-vsx32.c: Re-generated.
* features/rs6000/powerpc-vsx32l.c: Re-generated.
* features/rs6000/powerpc-vsx64.c: Re-generated.
* features/rs6000/powerpc-vsx64l.c: Re-generated.
* features/rs6000/rs6000.c: Re-generated.
* features/s390-linux32.c: Re-generated.
* features/s390-linux32v1.c: Re-generated.
* features/s390-linux32v2.c: Re-generated.
* features/s390-linux64.c: Re-generated.
* features/s390-linux64v1.c: Re-generated.
* features/s390-linux64v2.c: Re-generated.
* features/s390-te-linux64.c: Re-generated.
* features/s390-tevx-linux64.c: Re-generated.
* features/s390-vx-linux64.c: Re-generated.
* features/s390x-linux64.c: Re-generated.
* features/s390x-linux64v1.c: Re-generated.
* features/s390x-linux64v2.c: Re-generated.
* features/s390x-te-linux64.c: Re-generated.
* features/s390x-tevx-linux64.c: Re-generated.
* features/s390x-vx-linux64.c: Re-generated.
* features/sparc/sparc32-solaris.c: Re-generated.
* features/sparc/sparc64-solaris.c: Re-generated.
* features/tic6x-c62x.c: Re-generated.
* features/tic6x-c62x-linux.c: Re-generated.
* features/tic6x-c64x.c: Re-generated.
* features/tic6x-c64x-linux.c: Re-generated.
* features/tic6x-c64xp.c: Re-generated.
* features/tic6x-c64xp-linux.c: Re-generated.

Centralize i386 linux target descriptions

This patch moves all the tdesc_i386*_linux target descriptions to a
function i386_linux_read_description, which returns the right target
description according to xcr0.  This also remove the duplication in
getting target descriptions in corefile and native target.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* i386-linux-tdep.c (i386_linux_read_description): New function.
(i386_linux_core_read_description): Call
i386_linux_read_description.
* i386-linux-tdep.h (i386_linux_read_description): Declare.
(tdesc_i386_linux, tdesc_i386_mmx_linux): Remove declarations.
(tdesc_i386_avx_linux, tdesc_i386_mpx_linux): Likewise
(tdesc_i386_avx_mpx_linux, tdesc_i386_avx_avx512_linux): Likewise.
(tdesc_i386_avx_mpx_avx512_pku_linux): Likewise.
* x86-linux-nat.c (x86_linux_read_description): Call
i386_linux_read_description.

Add optional argument to command "maint prints c-tdesc"

Nowadays, we need two steps to print c files for xml target description,
that is, 1) read xml target description in, update the current tdesc,
2) visit the current tdesc, print the c file.  It is unnecessary to
involve in current tdesc, and some validations in each gdbarch are
performed unnecessarily, which will reject some target descriptions if
they are missing some mandatory feature.

This patch adds an optional argument to "maint print c-tdesc", which
is an XML file target description, so that we can combine the two
steps above into one step, and don't have to involve in global current
tdesc.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* NEWS: Mention it.
* features/Makefile (%.c: %.xml): Pass the xml file name to
command "maint print c-tdesc".
* target-descriptions.c (maint_print_c_tdesc_cmd): Get file
name from 'arg'.

gdb/doc:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* gdb.texinfo (Maintenance Commands): Document optional
argument of "maint print c-tdesc".

Class-fy target_desc

This patch adds ctor and dtor in target_desc.

gdb:

2017-07-26  Yao Qi  <yao.qi@linaro.org>

* target-descriptions.c (target_desc): Add ctor and dtor.  Do
in-class initialization.
(tdesc_create_feature): Call new instead of XCNEW.
(free_target_description): Ue delete.

Add enum for result of fast_tracepoint_collecting

I got confused by the result value of fast_tracepoint_collecting, while
it sounds like it would return true/false (whether the thread is
collecting or not), it actually returns:

  0: not collecting
  1: in the jump pad, before the relocated instruction
  2: in the jump pad, at or after the relocated instruction

To avoid confusion, I think it would be nice to make it return an enum.
If you can help find a shorter but still relavant name, it would be
awesome.  Otherwise, we'll go with that, fast_tpoint_collect_result,
which is at least consistent with the existing
fast_tpoint_collect_status.

gdb/gdbserver/ChangeLog:

* tracepoint.h (enum class fast_tpoint_collect_result): New
enumeration.
(fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
* tracepoint.c (fast_tracepoint_collecting): Likewise.
* linux-low.h: Include tracepoint.h.
(struct lwp_info) <collecting_fast_tracepoint>: Change type to
fast_tpoint_collect_result.
* linux-low.c (handle_tracepoints): Adjust.
(linux_fast_tracepoint_collecting): Change return type to
fast_tpoint_collect_result.
(maybe_move_out_of_jump_pad, linux_wait_for_event_filtered,
linux_wait_1, stuck_in_jump_pad_callback,
lwp_signal_can_be_delivered, linux_resume_one_lwp_throw,
proceed_one_lwp): Adjust to type change.

Automatic date update in version.in

Fix two NetBSD-specific typos in the configure.nat conversion.

- Add the '-lkvm' library requirement for NetBSD/sparc64.
- Fix spelling of 'nbsdelf' host.

gdb/Changelog:

* configure.nat: Add "-lkvm" for NetBSD/sparc64 and fix typo.

Make amd64_x32_init_abi and amd64_init_abi argument constant

gdb:

2017-07-25  Yao Qi  <yao.qi@linaro.org>

* amd64-tdep.c (amd64_init_abi): Make argument default_tdesc
constant.
(amd64_x32_init_abi): Likewise.
* amd64-tdep.h (amd64_init_abi): Update declaration.
(amd64_x32_init_abi): Likewise.

Fix thinko in previous change to elf32-msp430.c

Fix typos in error and option messages in OPCODES library.

PR 21739
opcodes * arc-opc.c (insert_rhv2): Use lower case first letter in error
message.
(insert_r0): Likewise.
(insert_r1): Likewise.
(insert_r2): Likewise.
(insert_r3): Likewise.
(insert_sp): Likewise.
(insert_gp): Likewise.
(insert_pcl): Likewise.
(insert_blink): Likewise.
(insert_ilink1): Likewise.
(insert_ilink2): Likewise.
(insert_ras): Likewise.
(insert_rbs): Likewise.
(insert_rcs): Likewise.
(insert_simm3s): Likewise.
(insert_rrange): Likewise.
(insert_r13el): Likewise.
(insert_fpel): Likewise.
(insert_blinkel): Likewise.
(insert_pclel): Likewise.
(insert_nps_bitop_size_2b): Likewise.
(insert_nps_imm_offset): Likewise.
(insert_nps_imm_entry): Likewise.
(insert_nps_size_16bit): Likewise.
(insert_nps_##NAME##_pos): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_bitop_ins_ext): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_min_hofs): Likewise.
(insert_nps_##NAME): Likewise.
(insert_nps_rbdouble_64): Likewise.
(insert_nps_misc_imm_offset): Likewise.
* riscv-dis.c (print_riscv_disassembler_options): Fix typo in
option description.

gas * testsuite/gas/arc/add_s-err.s: Update expected error message.

Catch exceptions thrown from gdbarch_skip_prologue

PR 21555 is caused by the exception during the prologue analysis when re-set
a breakpoint.

(gdb) bt
 #0  memory_error_message (err=TARGET_XFER_E_IO, gdbarch=0x153db50, memaddr=93824992233232) at ../../binutils-gdb/gdb/corefile.c:192
 #1  0x00000000005718ed in memory_error (err=TARGET_XFER_E_IO, memaddr=memaddr@entry=93824992233232) at ../../binutils-gdb/gdb/corefile.c:220
 #2  0x00000000005719d6 in read_memory_object (object=object@entry=TARGET_OBJECT_CODE_MEMORY, memaddr=93824992233232, memaddr@entry=1, myaddr=myaddr@entry=0x7fffffffd0a0 "P\333S\001", len=len@entry=1) at ../../binutils-gdb/gdb/corefile.c:259
 #3  0x0000000000571c6e in read_code (len=1, myaddr=0x7fffffffd0a0 "P\333S\001", memaddr=<optimized out>) at ../../binutils-gdb/gdb/corefile.c:287
 #4  read_code_unsigned_integer (memaddr=memaddr@entry=93824992233232, len=len@entry=1, byte_order=byte_order@entry=BFD_ENDIAN_LITTLE)                          at ../../binutils-gdb/gdb/corefile.c:362
 #5  0x000000000041d4a0 in amd64_analyze_prologue (gdbarch=gdbarch@entry=0x153db50, pc=pc@entry=93824992233232, current_pc=current_pc@entry=18446744073709551615, cache=cache@entry=0x7fffffffd1e0) at ../../binutils-gdb/gdb/amd64-tdep.c:2310
 #6  0x000000000041e404 in amd64_skip_prologue (gdbarch=0x153db50, start_pc=93824992233232) at ../../binutils-gdb/gdb/amd64-tdep.c:2459
 #7  0x000000000067bfb0 in skip_prologue_sal (sal=sal@entry=0x7fffffffd4e0) at ../../binutils-gdb/gdb/symtab.c:3628
 #8  0x000000000067c4d8 in find_function_start_sal (sym=sym@entry=0x1549960, funfirstline=1) at ../../binutils-gdb/gdb/symtab.c:3501
 #9  0x000000000060999d in symbol_to_sal (result=result@entry=0x7fffffffd5f0, funfirstline=<optimized out>, sym=sym@entry=0x1549960) at ../../binutils-gdb/gdb/linespec.c:3860
....
 #16 0x000000000054b733 in location_to_sals (b=b@entry=0x15792d0, location=0x157c230, search_pspace=search_pspace@entry=0x1148120, found=found@entry=0x7fffffffdc64) at ../../binutils-gdb/gdb/breakpoint.c:14211
 #17 0x000000000054c1f5 in breakpoint_re_set_default (b=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14301
 #18 0x00000000005412a9 in breakpoint_re_set_one (bint=bint@entry=0x15792d0) at ../../binutils-gdb/gdb/breakpoint.c:14412

This problem can be fixed by

 - either each prologue analyzer doesn't throw exception,
 - or catch the exception thrown from gdbarch_skip_prologue,

I choose the latter because the former needs to fix *every* prologue
analyzer to not throw exception.

This error can be reproduced by changing reread.exp.  The test reread.exp
has already test that breakpoint can be reset correctly after the
executable is re-read.  This patch extends this test by compiling test c
file with and without -fPIE.

(gdb) run ^M
The program being debugged has been started already.^M
Start it from the beginning? (y or n) y^M
x86_64/gdb/testsuite/outputs/gdb.base/reread/reread' has changed; re-reading symbols.
Error in re-setting breakpoint 1: Cannot access memory at address 0x555555554790^M
Error in re-setting breakpoint 2: Cannot access memory at address 0x555555554790^M
Starting program: /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.base/reread/reread ^M
This is foo^M
[Inferior 1 (process 27720) exited normally]^M
(gdb) FAIL: gdb.base/reread.exp: opts= "-fPIE" "ldflags=-pie" : run to foo() second time (the program exited)

This patch doesn't re-indent the code, to keep the patch simple.

gdb:

2017-07-25  Yao Qi  <yao.qi@linaro.org>

PR gdb/21555
* arch-utils.c (gdbarch_skip_prologue_noexcept): New function.
* arch-utils.h (gdbarch_skip_prologue_noexcept): Declare.
* infrun.c: Include arch-utils.h
(handle_step_into_function): Call gdbarch_skip_prologue_noexcept.
(handle_step_into_function_backward): Likewise.
* symtab.c (skip_prologue_sal): Likewise.

gdb/testsuite:

2017-07-25  Yao Qi  <yao.qi@linaro.org>

PR gdb/21555
* gdb.base/reread.exp: Wrap the whole test with two kinds of
compilation flags, with -fPIE and without -fPIE.

[ARM] Access FPSCR on vfpv2

GDB can fetch or store FPSCR on vfpv3, which has 32 VFP registers, but
fail to do so on vfpv2, which has 16 VFP registers.  GDB code is incorrect
for vfpv2,

       else if (tdep->vfp_register_count > 0
         && regno >= ARM_D0_REGNUM
       && regno <= ARM_D0_REGNUM + tdep->vfp_register_count)

while FPSCR register number is defined as ARM_D0_REGNUM + 32.

  ARM_D0_REGNUM, /* VFP double-precision registers.  */
  ARM_D31_REGNUM = ARM_D0_REGNUM + 31,
  ARM_FPSCR_REGNUM,

The code above uses "<=" rather than "<", in order to put FPSCR in the
range, but it is only correct when tdep->vfp_register_count is 32.  On
vpfv2, it is 16, and FPSCR is out of the range, so fetch_vfp_regs or
store_vfp_regs are not called.

gdb:

2017-07-25  Yao Qi  <yao.qi@linaro.org>

PR tdep/21717
* arm-linux-nat.c (arm_linux_fetch_inferior_registers): Update
condition for FPSCR.
(arm_linux_store_inferior_registers): Likewise.

Updated French translation for the BFD library.

Add a linker branch optimization for the MSP430.

PR 21824
* elf32-msp430.c (msp430_elf_relax_section): Allow conversion of
16-bit absolute branches into 10-bit pc-relative branches on the
MSP430 as well as the MSP430X.

oops - add changelog entry accidentally omitted from previous delta.

Stop readelf from returning an error status if asked to dump an emoty section.

PR 21820
* readelf.c (dump_section_as_strings): Do not fail if the section
was empty.
(dump_section_as_bytes): Likewise.

__tls_get_addr_opt stub eh_frame info

Since the __tls_get_addr_opt stub saves LR and makes a call, eh_frame
info should be generated to describe how to unwind through the stub.

The patch also changes the way the backend iterates over stubs, from
looking at all sections in stub_bfd to which all dynamic sections are
attached as well, to iterating over the group list, which gets just
the stub sections.  Most binaries will have just one or two stub
groups, so this is a little faster.

bfd/
* elf64-ppc.c (struct map_stub): Add tls_get_addr_opt_bctrl.
(stub_eh_frame_size): New function.
(ppc_size_one_stub): Set group tls_get_addr_opt_bctrl.
(group_sections): Init group tls_get_addr_opt_bctrl.
(ppc64_elf_size_stubs): Update sizing and initialization of
.eh_frame.  Iteration over stubs via group list.
(ppc64_elf_build_stubs): Iterate over stubs via group list.
(ppc64_elf_finish_dynamic_sections): Update finalization of
.eh_frame.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Add cfi.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt5.wf: New file.
* testsuite/ld-powerpc/powerpc.exp: Perform new tlsopt5 test.

Automatic date update in version.in

s390-vregs.exp: Fix Tcl error after non-zero-pad patch

s390-vregs.exp yields a Tcl error:

  ERROR: can't read "i": no such variable
      while executing
  "expr $a_high * ($i + 1) * $a_high "
      (procedure "hex128" line 2)
      invoked from within
  "hex128 $a_high $a_low $b_high $b_low"
  ...

This is a regression, caused by commit 30a254669b16b8 -- "Don't always
zero pad in print_*_chars".  That patch introduced a new procedure
"hex128" for formatting a 128-bit value as hex, but it accidentally moved
the calculation of the 128-bit value into that new procedure as well
instead of leaving it in the original context.  This is fixed.

gdb/testsuite/ChangeLog:

* gdb.arch/s390-vregs.exp: Calculate parameters to hex128 in the
calling context.
(hex128): Drop erroneous calculation of parameters.

[AArch64] Fix the bit pattern order in the comments in auto-generated file

The bit pattern comment in "aarch64_opcode_lookup_1" is reversed.

This patch fixed this.

opcode/
* aarch64-gen.c (print_decision_tree_1): Reverse the index of PATTERN to
correct the print.
* aarch64-dis-2.c: Regenerated.

Fix another memory access error triggered by attempting to parse a corrupt binary.

PR 21813
(alpha_vms_object_p): Check for a truncated record.

Fix address violation errors parsing corrupt binary files.

PR 21813
binutils* rddbg.c (read_symbol_stabs_debugging_info): Check for an empty
string whilst concatenating symbol names.

bfd * mach-o.c (bfd_mach_o_canonicalize_relocs): Pass the base address
of the relocs to the canonicalize_one_reloc routine.
* mach-o.h (struct bfd_mach_o_backend_data): Update the prototype
for the _bfd_mach_o_canonicalize_one_reloc field.
* mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Add
res_base parameter.  Use to check for corrupt pair relocs.
* mach-o-aarch64.c (bfd_mach_o_arm64_canonicalize_one_reloc):
Likewise.
* mach-o-i386.c (bfd_mach_o_i386_canonicalize_one_reloc):
Likewise.
* mach-o-x86-64.c (bfd_mach_o_x86_64_canonicalize_one_reloc):
Likewise.

* vms-alpha.c (_bfd_vms_slurp_eihd): Make sure that there is
enough data in the record before attempting to parse it.
(_bfd_vms_slurp_eeom): Likewise.

(_bfd_vms_slurp_egsd): Check for an invalid section index.
(image_set_ptr): Likewise.
(alpha_vms_slurp_relocs): Likewise.

Stop the generation of mapping symbols in the debug sections of ARM and AArch64 binaries.

PR 21809
* config/tc-aarch64.c (aarch64_init_frag): Do not set a mapping
state for frags in debug sections.
* config/tc-arm.c (arm_init_frag): Likewise.

Improve "unrecognized relocation" error messages to add the suggestion that the linker might be out of date.

PR 21803
* reloc.c (_bfd_unrecognized_reloc): New function.  Reports
an unrecognized reloc and sets the bfd_error value.
* libbfd.h: Regenerate.
* elf32-arm.c (elf32_arm_final_link_relocate): Use the new
function.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-tilepro.c (tilepro_elf_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise.
* elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise.

[ARC] Fix big-endian ld tests errors.

A set of small patches that are fixing big-endian observed errors.

ld/
2017-07-24  Claudiu Zissulescu  <claziss@synopsys.com>

* testsuite/ld-arc/jli-overflow.d: Force testing for little
endian.
* testsuite/ld-arc/tls_gd-01.d: Fix string to match bigendian
systems.
* testsuite/ld-arc/tls_ie-01.d: Fix test for bigendian systems.

Automatic date update in version.in

* dwarf2dbg.c (dwarf2dbg_final_check): Rename local variable exp from expr.

Trying to build (for mmix-knuth-mmixware but I don't think that
matters) yields the following (repeatable on e.g. CompileFarm gcc20
sporting gcc-4.7.2 as default):

gcc -DHAVE_CONFIG_H -I. -I/home/hp/binutils/src/gas  -I. -I/home/hp/binutils/src/gas -I../bfd -I/home/hp/binutils/src/gas/config -I/home/hp/binutils/src/gas/../include -I/home/hp/binutils/src/gas/.. -I/home/hp/binutils/src/gas/../bfd -DLOCALEDIR="\"/usr/local/share/locale\""  -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Werror -Wwrite-strings -I/home/hp/binutils/src/gas/../zlib -g -O2 -MT dwarf2dbg.o -MD -MP -MF .deps/dwarf2dbg.Tpo -c -o dwarf2dbg.o /home/hp/binutils/src/gas/dwarf2dbg.c
cc1: warnings being treated as errors
/home/hp/binutils/src/gas/dwarf2dbg.c: In function 'dwarf2dbg_final_check':
/home/hp/binutils/src/gas/dwarf2dbg.c:2246: error: declaration of 'expr' shadows a global declaration
/home/hp/binutils/src/gas/expr.h:180: error: shadowed declaration is here
make[4]: *** [dwarf2dbg.o] Error 1

IIRC this is a false namespace clash and the warning is not observable
with a new-enough gcc.  Committed as obvious.

brgds, H-P
PS. Idea: -Wcompiler; warn about constructs problematic with e.g. old gcc. 1/2 ;-)

Correct eh_frame info for __glink_PLTresolve

My PPC64_OPT_LOCALENTRY patch of June 1, git commit f378ab099d, and
the later gold change, git commit 7ee7ff7015, added an insn in
__glink_PLTresolve which needs a corresponding adjustment in the
eh_frame info for asynchronous exceptions to unwind correctly.

It would have been OK for both ABIs to use +5 for the advance before
restore of LR, since we can put the DW_CFA_restore_extended on any
insn after the actual restore and before the r12/r0 copy is clobbered,
but it's slightly better to delay as much as possible.  There are
then more addresses where fewer CFA program insns are executed.

bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Correct advance to
restore of LR.
gold/
* powerpc.cc (glink_eh_frame_fde_64v2): Correct advance to
restore of LR.
(glink_eh_frame_fde_64v1): Advance to restore of LR at latest
possible insn.

Automatic date update in version.in

Use std::vector in struct catch_syscall_inferior_data

This changes struct catch_syscall_inferior_data to use a std::vector
rather than a VEC.  It also changes it to be allocated with new and
destroyed with delete.

ChangeLog
2017-07-22  Tom Tromey  <tom@tromey.com>

* break-catch-syscall.c (struct catch_syscall_inferior_data)
<syscalls_counts>: Now a std::vector.
(get_catch_syscall_inferior_data): Use "new".
(catch_syscall_inferior_data_cleanup): Use "delete".
(insert_catch_syscall, remove_catch_syscall)
(clear_syscall_counts): Update.

Use std::vector in syscall_catchpoint

This changes syscall_catchpoint to use a std::vector rather than a VEC
for "syscalls_to_be_caught".  This simplifies the code a bit.

ChangeLog
2017-07-22  Tom Tromey  <tom@tromey.com>

* break-catch-syscall.c (syscall_catchpoint)
<syscalls_to_be_caught>: Now a std::vector<int>
(~syscall_catchpoint): Remove.
(insert_catch_syscall, remove_catch_syscall)
(breakpoint_hit_catch_syscall, print_one_catch_syscall)
(print_mention_catch_syscall, print_recreate_catch_syscall):
Update.
(create_syscall_event_catchpoint): Change type of "filter"
parameter.
(catch_syscall_split_args): Return a std::vector.
(catch_syscall_command_1, catching_syscall_number_1): Update.

C++-ify break-catch-throw

This changes exception_catchpoint's "exception_rx' member to be a
std::string, and updating the users.

ChangeLog
2017-07-22  Tom Tromey  <tom@tromey.com>

* break-catch-throw.c (struct exception_catchpoint)
<exception_rx>: Now a std::string.
(~exception_catchpoint): Remove.
(print_one_detail_exception_catchpoint): Update.
(handle_gnu_v3_exceptions): Change type of except_rx.
(extract_exception_regexp): Return a std::string.
(catch_exception_command_1): Update.

C++-ify break-catch-sig

This changes signal_catchpoint to be more of a C++ class, using
std::vector and updating the users.

ChangeLog
2017-07-22  Tom Tromey  <tom@tromey.com>

* break-catch-sig.c (gdb_signal_type): Remove typedef.
(struct signal_catchpoint) <signals_to_be_caught>: Now a
std::vector.
<catch_all>: Now a bool.
(~signal_catchpoint): Remove.
(signal_catchpoint_insert_location)
(signal_catchpoint_remove_location)
(signal_catchpoint_breakpoint_hit, signal_catchpoint_print_one)
(signal_catchpoint_print_mention)
(signal_catchpoint_print_recreate)
(signal_catchpoint_explains_signal): Update.
(create_signal_catchpoint): Change type of "filter" and
"catch_all".
(catch_signal_split_args): Return a std::vector.  Change type of
"catch_all".
(catch_signal_command): Update.

Automatic date update in version.in

gdb.python/py-unwind: Disable stack protection

[I made some typo fixes but forgot to amend my commit before sending the patch,
 hence this v2.]

I see the following failure on Ubuntu 16.04's gcc 5.4.0:

Running /home/emaisin/src/binutils-gdb/gdb/testsuite/gdb.python/py-unwind.exp ...
FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)

The problem is that the test expects a very particular stack layout.
When stack protection is enabled, it adds a canary value which looks
like an additional local variable.  This makes the test complain about
a bad stack layout and fail.

The simple solution is to disable stack protection for that test using
-fno-stack-protector.  I checked older compilers (gcc 4.4, clang 3.5)
and they support that flag, so I don't think it's necessary to probe for
whether the compiler supports it.

Maybe a better solution would be to change the test to make it cope with
different stack layouts (perhaps it could save addresses of stuff in
some global variables which GDB/the unwinder would read).  I'll go with
the simple solution for now though.

gdb/testsuite/ChangeLog:

* gdb.python/py-unwind.exp: Disable stack protection when
building test file.

Updated French translation for the binutils subdirectory.

* po/fr.po: Updated French translation.

Fix typo in warning message.

PR 21810
* dwarf.c (display_gdb_index): Fix typo in warning message.

Remove unused variables in dwarf parser.

* dwarf.c (last_pointer_size, warned_about_missing_comp_units):
Remove.
(load_debug_info): Remove assignments to those two variables.

This patch introduces support for specifing views in .loc directives, so that the compiler can use the assembler to generate line number information and have the assembler determine view numbers to multiple views at the same program counter.

binutils* dwarf.c (struct State_Machine_Registers): Add view field.
(reset_state_machine): Reset view.
(process_extended_line_op): Reset view when appropriate.
(display_debug_lines_raw): Increment or reset view when appropriate.
Print nonzero views.  Support print view resets, disabled by default.
(display_debug_lines_decoded): Likewise.  Disambiguate op_code tests,
enabling printing of end_sequence.
* testsuite/binutils-all/dw2-1.W: Add nonzero views.
* testsuite/binutils-all/dw2-3.W: Likewise.
* testsuite/binutils-all/dw2-3gabi.W: Likewise.
* testsuite/binutils-all/dw5.W: Add end sequence lines.
* testsuite/binutils-all/i386/compressed-1a.d: Add nonzero views.
* testsuite/binutils-all/libdw2-compressedgabi.out: Likewise.
* testsuite/binutils-all/objdump.W: Likewise.
* testsuite/binutils-all/objdump.WL: Add end sequence lines.
* testsuite/binutils-all/x86-64/compressed-1a.d: Add nonzero views.

gas * doc/as.texinfo (.loc): Document view support.
* dwarf2dbg.c (unused): Check offset of next in struct line_entry.
(current): Initialize view.
(force_reset_view, view_assert_failed): New variables.
(reverse_line_entry_list): New function.
(set_or_check_view): Likewise.
(dwarf2_gen_line_info_1): Call it.
(dwarf2_where): Set view to NULL.
(dwarf2_emit_insn): Return early when called before first file.
(dwarf2_directive_loc): Add view support.  Emit insn
immediately when view option is given.
(process_entries): Avoid set_address to reset view when a known
address change already implies the view reset.
(dwarf2dbg_final_check): New function.
* dwarf2dbg.h (struct dwarf2_line_info): Add view.
(dwarf2dbg_final_check): Declare.
* read.c (s_leb128): Parse expression as deferred.
* testsuite/gas/all/gas.exp: Run sleb128-9.
* testsuite/gas/all/sleb128-9.d: New.
* testsuite/gas/all/sleb128-9.l: New.
* testsuite/gas/all/sleb128-9.s: New.
* testsuite/gas/elf/dwarf2-1.d: Add nonzero views.
* testsuite/gas/elf/dwarf2-2.d: Likewise.
* testsuite/gas/elf/dwarf2-5.d: New.
* testsuite/gas/elf/dwarf2-5.s: New.
* testsuite/gas/elf/dwarf2-6.d: New.
* testsuite/gas/elf/dwarf2-6.s: New.
* testsuite/gas/elf/dwarf2-7.d: New.
* testsuite/gas/elf/dwarf2-7.s: New.
* testsuite/gas/elf/dwarf2-8.d: New.
* testsuite/gas/elf/dwarf2-8.l: New.
* testsuite/gas/elf/dwarf2-8.s: New.
* testsuite/gas/elf/dwarf2-9.d: New.
* testsuite/gas/elf/dwarf2-9.l: New.
* testsuite/gas/elf/dwarf2-9.s: New.
* testsuite/gas/elf/dwarf2-10.d: New.
* testsuite/gas/elf/dwarf2-10.l: New.
* testsuite/gas/elf/dwarf2-10.s: New.
* testsuite/gas/elf/dwarf2-11.d: New.
* testsuite/gas/elf/dwarf2-11.s: New.
* testsuite/gas/elf/dwarf2-12.d: New.
* testsuite/gas/elf/dwarf2-12.s: New.
* testsuite/gas/elf/dwarf2-13.d: New.
* testsuite/gas/elf/dwarf2-13.s: New.
* testsuite/gas/elf/dwarf2-14.d: New.
* testsuite/gas/elf/dwarf2-14.s: New.
* testsuite/gas/elf/dwarf2-15.d: New.
* testsuite/gas/elf/dwarf2-15.s: New.
* testsuite/gas/elf/dwarf2-16.d: New.
* testsuite/gas/elf/dwarf2-16.s: New.
* testsuite/gas/elf/dwarf2-17.d: New.
* testsuite/gas/elf/dwarf2-17.s: New.
* testsuite/gas/elf/dwarf2-18.d: New.
* testsuite/gas/elf/dwarf2-18.s: New.
* testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests.
* testsuite/gas/i386/dw2-compress-1.d: Add nonzero views.
* testsuite/gas/i386/dw2-compressed-1.d: Likewise.
* testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise.
* testsuite/gas/lns/lns-big-delta.d: Likewise.
* testsuite/gas/lns/lns-duplicate.d: Likewise.
* testsuite/gas/mips/loc-swap-2.d: Likewise.
* testsuite/gas/mips/loc-swap-3.d: Likewise.
* testsuite/gas/mips/loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-2.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap-2.d: Likewise.
* testsuite/gas/mips/mips16@loc-swap.d: Likewise.
* testsuite/gas/mips/mips16e@loc-swap.d: Likewise.
* write.c (write_object_file): Check pending view asserts.
(cvt_frag_to_fill): Complain about undefined leb128 operand.

S/390: Support z14 as CPU name.

With IBM z14 officially announced I can add z14 as CPU name.

No regressions with that patch on s390x.

gas/ChangeLog:

2017-07-21  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU
name.
* doc/as.texinfo: Add z14 to CPU string list.
* doc/c-s390.texi: Likewise.

opcodes/ChangeLog:

2017-07-21  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

* s390-mkopc.c (main): Enable z14 as CPU string in the opcode
table.

Automatic date update in version.in

Make language_def O(1)

Profiling GDB with the rest of series applied, I saw calls to
language_def showing up high in some runs.  The problem is that
language_def is O(N) currently, since walk the languages vector each
time to find the matching language_defn.

IMO, the add_language mechanism is pointless, because "enum language"
implies the core of GDB needs to know about all languages anyway.  So
simply make the languages vector array be an array where each
element's index is the corresponding enum language enumerator.  Note
that "local_language_defn" is gone along the way.  It's just a copy of
"auto", so the new code simply maps one to the other.  One fewer place
to update when we need to change the language vector...

Also, a while ago the output of "set language" was made out of order
as side effect of some other change.  While I was at it, I made them
sorted again.

gdb/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* ada-lang.c (ada_language_defn): Make extern.
(_initialize_ada_language): Remove add_language call.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Make extern.
(_initialize_c_language): Delete.
* completer.c (compare_cstrings): Delete, moved to utils.h.
* d-lang.c (d_language_defn): Make extern.
(_initialize_d_language): Remove add_language calls.
* defs.h (enum language): Add comment.
* f-lang.c (f_language_defn): Make extern.
(_initialize_f_language): Remove add_language call.
* go-lang.c (go_language_defn): Make extern.
(_initialize_go_language): Remove add_language call.
* language.c: Include <algorithm>.
(languages): Redefine as const array.
(languages_size, languages_allocsize, DEFAULT_ALLOCSIZE): Delete.
(set_language_command): Handle "local".  Use for-range loop.
(set_language): Remove loop.
(language_enum): Rewrite.
(language_def, language_str): Remove loops.
(add_language): Delete.
(add_set_language_command): New, based on add_languages.
(skip_language_trampoline): Adjust.
(local_language_defn): Delete.
(language_gdbarch_post_init): Adjust.
(_initialize_language): Remove add_language calls.  Call
add_set_language_command.
* language.h (add_language): Delete.
(auto_language_defn)
(unknown_language_defn, minimal_language_defn, ada_language_defn)
(asm_language_defn, c_language_defn, cplus_language_defn)
(d_language_defn, f_language_defn, go_language_defn)
(m2_language_defn, objc_language_defn, opencl_language_defn)
(pascal_language_defn, rust_language_defn): Declare.
* m2-lang.c (m2_language_defn): Make extern.
(_initialize_m2_language): Remove add_language call.
* objc-lang.c (objc_language_defn): Make extern.
(_initialize_objc_language): Remove add_language call.
* opencl-lang.c (opencl_language_defn): Make extern.
(_initialize_opencl_language): Remove add_language call.
* p-lang.c (pascal_language_defn): Make extern.
(_initialize_pascal_language): Delete.
* rust-lang.c (rust_language_defn): Make extern.
(_initialize_rust_language): Delete.
* utils.h (compare_cstrings): New static inline function.

gdb/testsuite/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* gdb.base/default.exp (set language): Adjust expected output.

get_int_var_value

I noticed that get_int_var_value's parameters could use some
constification.  And then realized that client code would become
simpler by changing the interface to return the success/failure
indication as actual return value, as it allows getting rid of the
local "boolean" variable.

gdb/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* ada-lang.c (ada_to_fixed_type_1): Adjust.
(get_var_value): Constify parameters.
(get_int_var_value): Change prototype.
(to_fixed_range_type): Adjust.
* ada-lang.h (get_int_var_value): Change prototype.

Use SYMBOL_MATCHES_SEARCH_NAME some more

gdb/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* dwarf2read.c (dw2_lookup_symbol): Use
SYMBOL_MATCHES_SEARCH_NAME.
* psymtab.c (psym_lookup_symbol): Use SYMBOL_MATCHES_SEARCH_NAME.

Eliminate block_iter_name_*

This patch gets rid of block_iter_name_* as being unnecessary.  It's
the same as calling block_iter_match_*, and passing strcmp_iw as
comparison routine.

(A later patch will get rid of those new explicit strcmp_iw calls.)

gdb/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* block.c (block_iter_name_step, block_iter_name_first)
(block_iter_name_next): Delete.
(block_lookup_symbol_primary): Adjust to use
dict_iter_match_first/dict_iter_match_next.
* block.h (block_iter_name_first, block_iter_name_next): Delete
declarations.
(ALL_BLOCK_SYMBOLS_WITH_NAME): Adjust to use
dict_iter_match_first/dict_iter_match_next.

Fix cp_find_first_component_aux bug

Valgrind catches an out-of-bounds read here:

 $ gdb ./testsuite/outputs/gdb.cp/method2/method2
 (gdb) start
 [...]
 Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd958) at src/gdb/testsuite/gdb.cp/method2.cc:26
 26        return 0;
 (gdb) b A::operator
 ==26907== Invalid read of size 1
 ==26907==    at 0x75C0AE: cp_find_first_component_aux(char const*, int) (cp-support.c:951)
 ==26907==    by 0x75C084: cp_find_first_component(char const*) (cp-support.c:925)
 ==26907==    by 0x75C3DA: cp_entire_prefix_len(char const*) (cp-support.c:1089)
 ==26907==    by 0x758B16: cp_lookup_symbol_in_namespace(char const*, char const*, block const*, domain_enum_tag, int) (cp-namespace.c:314)
 ==26907==    by 0x75972A: lookup_namespace_scope(language_defn const*, char const*, block const*, domain_enum_tag, char const*, int) (cp-namespace.c:739)
 ==26907==    by 0x7597CB: cp_lookup_symbol_nonlocal(language_defn const*, char const*, block const*, domain_enum_tag) (cp-namespace.c:768)
 ==26907==    by 0x8C1137: lookup_symbol_aux(char const*, block const*, domain_enum_tag, language, field_of_this_result*) (symtab.c:2016)
 ==26907==    by 0x8C098A: lookup_symbol_in_language(char const*, block const*, domain_enum_tag, language, field_of_this_result*) (symtab.c:1824)
 ==26907==    by 0x8C0A04: lookup_symbol(char const*, block const*, domain_enum_tag, field_of_this_result*) (symtab.c:1836)
 ==26907==    by 0x82CBE1: find_label_symbols(linespec_state*, VEC_symbolp*, VEC_symbolp**, char const*) (linespec.c:3390)
 ==26907==    by 0x828FB5: linespec_parse_basic(ls_parser*) (linespec.c:1620)
 ==26907==    by 0x82A78F: parse_linespec(ls_parser*, char const*) (linespec.c:2307)
 ==26907==  Address 0x910f97c is 0 bytes after a block of size 12 alloc'd
 ==26907==    at 0x4C28BF6: malloc (vg_replace_malloc.c:299)
 ==26907==    by 0x74E737: xmalloc (common-utils.c:43)
 ==26907==    by 0x74EAF4: savestring(char const*, unsigned long) (common-utils.c:179)
 ==26907==    by 0x826CEF: copy_token_string(ls_token) (linespec.c:488)
 ==26907==    by 0x828EF6: linespec_parse_basic(ls_parser*) (linespec.c:1599)
 ==26907==    by 0x82A78F: parse_linespec(ls_parser*, char const*) (linespec.c:2307)
 ==26907==    by 0x82AE27: event_location_to_sals(ls_parser*, event_location const*) (linespec.c:2469)
 ==26907==    by 0x82B1CE: decode_line_full(event_location const*, int, program_space*, symtab*, int, linespec_result*, char const*, char const*) (linespec.c:2557)
 ==26907==    by 0x720C8A: parse_breakpoint_sals(event_location const*, linespec_result*) (breakpoint.c:9550)
 ==26907==    by 0x72A2F7: create_sals_from_location_default(event_location const*, linespec_result*, bptype) (breakpoint.c:14484)
 ==26907==    by 0x727F86: bkpt_create_sals_from_location(event_location const*, linespec_result*, bptype) (breakpoint.c:13219)
 ==26907==    by 0x72146D: create_breakpoint(gdbarch*, event_location const*, char*, int, char*, int, int, bptype, int, auto_boolean, breakpoint_ops const*, int, int, int, unsigned int) (breakpoint.c:9759)

Tests exercising this will be added further down the series.

gdb/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* cp-support.c (cp_find_first_component_aux): Add missing case for
end of string.

Make gdb.base/dmsym.exp independent of "set language ada"

This test is using "set language ada" expecting that to cause GDB to
do Ada symbol name matching.  That won't work when GDB uses the
symbol's language to decide which symbol matching algorithm to use,
because the test's symbols are C symbols.

So generalize the test a bit to not rely on Ada name matching rules.

Confirmed that by undoing the original fix the test was written for,
the test still fails.

gdb/testsuite/ChangeLog:
2017-07-20  Pedro Alves  <palves@redhat.com>

* gdb.base/dmsym.c (pck__foo__bar__minsym): Rename to ...
(test_minsym): ... this, and make static.
(get_pck__foo__bar__minsym): Rename to ...
(get_test_minsym): ... this.
* gdb.base/dmsym.exp (): Remove "set language ada" call.  Adjust
symbol names and comments.
* gdb.base/dmsym_main.c (get_pck__foo__bar__minsym): Rename to ...
(get_test_minsym): ... this.
(pck__foo__bar__minsym__2): Rename to ...
(test_minsym): ... this.
(main): Adjust.

Update the German translation for the opcodes library.

* po/de.po: Updated German translation.

Automatic date update in version.in

PR ld/16656: Add missing annotation to the relevant ChangeLog entries

Add PR ld/16656 annotation to ChangeLog entries for commit 9a0f1d5099fa
("LD/testsuite: Conditionalize the placement of `.dynamic' in
GNU_RELRO") and commit ("LD/testsuite: Conditionalize the placement of
`.got' in GNU_RELRO").

[AArch64] Fix PR18841 ifunc relocation ordering

In order to get the ifunc relocs properly sorted the correct class
needs to be returned.  The code mimics what has been done for x86.

Fixes
FAIL: Run pr18841 with libpr18841c.so

bfd/
PR ld/18841
* elfnn-aarch64.c (elfNN_aarch64_reloc_type_class): Return
reloc_class_ifunc for ifunc symbols.

Extend previous fix to coff-rs6000.c to coff64-rs6000.c

PR 21786
* coff64-rs6000.c (_bfd_strntol): New function.
(_bfd_strntoll): New function.
(GET_VALUE_IN_FIELD): New macro.
(xcoff64_slurp_armap): Use new macros.

Fix use-after-free error when parsing a corrupt nested archive.

PR 21787
* archive.c (bfd_generic_archive_p): If the bfd does not have the
correct magic bytes at the start, set the error to wrong format
and clear the format selector before returning NULL.

LD/testsuite: Add 2**4 section alignment FILL script statement test

Complement commit ffe54b3798db ("Pad sections according to current
script FILL.") and add a FILL script statement test for targets that
impose the minimum alignment of more than 2**2 for the `.text' section.
These targets include IA-64 targets, MIPS targets other than bare-metal
ELF and VxWorks, TILE-Gx targets, TILEPro targets and X86-64 PE targets.

Use the `notarget' tag for configuration triplets that are incompatible
with the new test, but are supported by the existing FILL test, and
`xfail' for ones that have issues due to section alignment or padding
with both tests.  Make a complementary change to the existing FILL test,
removing the following test issues:

arm-epoc-pe  -FAIL: ld-scripts/fill
mips-elf  -XPASS: ld-scripts/fill
mips-img-elf  -XPASS: ld-scripts/fill
mips-mti-elf  -XPASS: ld-scripts/fill
mips-sde-elf  -XPASS: ld-scripts/fill
mips-vxworks  -XPASS: ld-scripts/fill
mipsel-elf  -XPASS: ld-scripts/fill
mipsel-img-elf  -XPASS: ld-scripts/fill
mipsel-mti-elf  -XPASS: ld-scripts/fill
mipsel-vxworks  -XPASS: ld-scripts/fill
mipsisa32-elf  -XPASS: ld-scripts/fill
mipsisa32el-elf  -XPASS: ld-scripts/fill
mipsisa64-elf  -XPASS: ld-scripts/fill
mipsisa64el-elf  -XPASS: ld-scripts/fill
tilegx-linux  -FAIL: ld-scripts/fill
tilepro-elf  -FAIL: ld-scripts/fill
tx39-elf  -XPASS: ld-scripts/fill

ld/
* testsuite/ld-scripts/fill.d: Adjust `xfail' entries.  Add
`notarget' entries.  Update comments.
* testsuite/ld-scripts/fill16.d: New test.
* testsuite/ld-scripts/fill16_0.s: New test source.
* testsuite/ld-scripts/fill16_1.s: New test source.
* testsuite/ld-scripts/fill16_2.s: New test source.
* testsuite/ld-scripts/data.exp: Run the new test.

Fix address violation when attempting to read a corrupt field in a COFF archive header structure.

PR 21786
* coff-rs6000.c (_bfd_strntol): New function.
(_bfd_strntoll): New function.
(GET_VALUE_IN_FIELD): New macro.
(EQ_VALUE_IN_FIELD): new macro.
(_bfd_xcoff_slurp_armap): Use new macros.
(_bfd_xcoff_archive_p): Likewise.
(_bfd_xcoff_read_ar_hdr): Likewise.
(_bfd_xcoff_openr_next_archived_file): Likewise.
(_bfd_xcoff_stat_arch_elt): Likewise.

[ARC] Add SecureShield AUX registers

Update auxiliary registers with SecureShield ones.

opcodes/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>

* arc-regs.h (sec_stat): New aux register.
(aux_kernel_sp): Likewise.
(aux_sec_u_sp): Likewise.
(aux_sec_k_sp): Likewise.
(sec_vecbase_build): Likewise.
(nsc_table_top): Likewise.
(nsc_table_base): Likewise.
(ersec_stat): Likewise.
(aux_sec_except): Likewise.

[ARC] Add SJLI instruction.

include/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>

* opcode/arc.h (SJLI): Add.

opcode/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>

* arc-opc.c (extract_uimm12_20): New function.
(UIMM12_20): New operand.
(SIMM3_5_S): Adjust.
* arc-tbl.h (sjli): Add new instruction.

[ARC] Add JLI support.

The following relocation types were added to GCC/binutils:

ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.

bfd/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>
    John Eric Martin  <John.Martin@emmicro-us.com>

* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.

gas/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>

* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.

include/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>
    John Eric Martin  <John.Martin@emmicro-us.com>

* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.

ld/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>
    John Eric Martin  <John.Martin@emmicro-us.com>

* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.

opcode/
2017-07-19  Claudiu Zissulescu  <claziss@synopsys.com>
    John Eric Martin  <John.Martin@emmicro-us.com>

* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.

Remove datasize measurements based on sbrk()

binutils/
* nm.c (show_stats): Remove variable.
(long_options): Remove --stats option.
(main): Remove handling of --stats.

ld/
* ldmain.c (main): Remove display of data size.

gas/
* as.c (start_sbrk): Remove.
(main): Remove assignment.
(dump_statistics): Remove display of data size.

Fix gas crash on missing seh_endproc.

gas/
* testsuite/gas/pe/seh-x64-err-2.s: New test.
* testsuite/gas/pe/seh-x64-err-2.l: New stderr output.
* testsuite/gas/pe/pe.exp: Add test.
* config/obj-coff-seh.c (obj_coff_seh_do_final): Don't try to end
seh part.

Automatic date update in version.in

LD/testsuite: Conditionalize the placement of `.got' in GNU_RELRO

Complement commit d345186d0535 ("Check if GNU_RELRO segment is is
generated") and exclude the presence of a `.got' section from implying
the creation of a GNU_RELRO segment for targets which place the section
along with small data, and therefore as it stands cannot have the
section assigned to GNU_RELRO.  This is because we currently only
support a single GNU_RELRO segment and we place it at the beginning of
regular data which is then separated from small data by read-write data.

Currently the list of such targets consists of Alpha, Linux HPPA, NetBSD
HPPA, OpenBSD HPPA, Meta, MIPS, Nios II, OpenRISC 1000, RISC-V, SH and
X86-64, as determined by examining default linker scripts produced in a
`--enable-targets=all' build for those that have DATA_SEGMENT_RELRO_END
set and `.got' placed beyond.  These targets do not set NO_SMALL_DATA or
DATA_GOT in their respective files in ld/emulparams/*, hovever checking
for the absence of these settings on its own is not very feasible due to
the structure of these files and the lack of support for GNU_RELRO by
some targets in the first place.

Add a separate control for `.got.plt' which does get placed in GNU_RELRO
on MIPS targets even though `.got' does not.

ld/
* testsuite/ld-elf/binutils.exp (binutils_test): Make the
expectation for `.got' in GNU_RELRO segment target-specific.
Handle `.got.plt' separately.

LD/testsuite: Conditionalize the placement of `.dynamic' in GNU_RELRO

Complement commit d345186d0535 ("Check if GNU_RELRO segment is is
generated") and exclude the presence of a `.dynamic' section from
implying the creation of a GNU_RELRO segment for targets which place the
section in the (read-only) text segment, and therefore cannot have the
section assigned to GNU_RELRO and neither it would make sense.

Currently the list of such targets consists of 64-bit HPPA and
non-VxWorks MIPS targets, as determined by looking for TEXT_DYNAMIC
being set across ld/emulparams/* and then verified by examining default
linker scripts produced in a `--enable-targets=all' build.

ld/
* testsuite/ld-elf/binutils.exp (binutils_test): Make the
expectation for `.dynamic' in GNU_RELRO segment target-specific.

Fix spelling typos.