sqlite: bump version to 3140200 (3.14.2)

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apache: add customization of MPM

MPM can be selected between event, prefork or worker
Set worker as the default one as it was before even if event MPM is
better on system supporting thread safe polling

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mx6ulpico: Use kernel 4.8-rc5

With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: allow specifying 4.8 as kernel header version

Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.

In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/warp7: Use mainline U-Boot

warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.

As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/wandboard: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6ulpico: Bump to U-Boot 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-rtsp-server: new package

Based on patch by Phil Edworthy:
http://lists.busybox.net/pipermail/buildroot/2010-June/035777.html

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Piotr Nakraszewicz <piotr.nakraszewicz@imgtec.com>
Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
[Thomas: add host-pkgconf to the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/urg: fix build

Update select-h patch to also fix the C++ serial driver.

Fixes:
  http://autobuild.buildroot.net/results/cd7/cd76699188d2ee99b5f2d32b6a797de0d832a192/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: bump to version 2016.09

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nginx-naxsi: add missing pcre dependency

Fixes:
  http://autobuild.buildroot.net/results/9c7/9c7bad6831b09251af81e2bbfc595a241df87c70/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: add patch to disable pie

Ubuntu 16.10 has pie enable by default. This causes a build failure with
syslinux.

https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1579023

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas: improve patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vim: bump version to v8.0.0001

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Make explicit that a ext4 rootfs is used

Make explicit that a ext4 rootfs is used.

As explained by Thomas Petazzoni:

"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:

-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas      11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

micropython: add upstream patch to fix build failures

This allows micropython to build with a host python version of 2.6.

Fixes:
  http://autobuild.buildroot.net/results/212cee82cc9db81cf1524925d106e01fc1e62ce5
  http://autobuild.buildroot.net/results/4f72a602702f4eac1fe8c4a385ebfeb6e1c50df2

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pugixml: Fix CMakelists.txt cxx_long_long_type bug.

CMakelist.txt tries to enable the cxx_long_long_type option,
even if the feature isn't available. (Which causes some builds to fail)

The included patch checks if the option is present before applying it.

The patch was backported from:
https://github.com/zeux/pugixml/commit/4dbb5646196a4a3cc94097f1473ef11d1d44df11

Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php-ssh2: fix kconfig circular deps after libssh2 fix

After we simplified the libssh2 dependencies, the new dependencies were
not propagated to the php-ssh2 package, causing circular dependencies:

    package/openssl/Config.in:1:error: recursive dependency detected!
    package/openssl/Config.in:1:    symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBSSH2
    package/libssh2/Config.in:1:    symbol BR2_PACKAGE_LIBSSH2 is selected by BR2_PACKAGE_PHP_SSH2
    package/php-ssh2/Config.in:1:   symbol BR2_PACKAGE_PHP_SSH2 depends on BR2_PACKAGE_OPENSSL

Just drop the now-useless dependency inherited from libssh2: libssh2 now
has no dependency.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/minnowboard-max: Add kernel options to support USB disks

As reported by bug #9176 the current v4.6 kernel config
(used by Minnowboard MAX and Turbot) does not support
USB disks. Since this is a pretty essential functionality,
it's desirable to have it, so let's add the required options.

Kernel config linux-v3.8.config (currently used by the first
generation Minnowboard) doesn't need this change.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6dlsabresd: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use zImage

U-Boot, with the default environment, is looking for a zImage.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imx6sololiteevk: use the common genimage template

* Generate an sdcard image based on the common Freescale genimage
  template.

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: use the common genimage template

The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.

This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
  The offset of the first partition was 1MB in the script and is
  modified to 8MB in the template.
* Fixes the readme.txt file accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board/freescale: factorize genimage logic

For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
  genimage.cfg.template because they all use the same layout.  The only
  difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
  which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly

Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: fix makeinfo related issue

The latest version of binutils, 2.27, added in commit
b700157db40410907d6a07582eacbb5030fd919e, fails to build on systems
that don't have makeinfo installed. This commit therefore applies the
same fixup as the one used for binutils 2.26, which consists in
touching all the .info files, so that they don't get rebuilt.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh2: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh2 has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh2 can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

Fix this dependenc byt doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libssh: fix dependency on libgcrypt

Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh has
inherited the dependency from libgcrypt (propagated from libgpg-error).

However, since libssh can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.

But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.

This in itself is already incorrect, but that can cause further issues,
as some packages (e.g. Kodi) will select (indirectly) openssl, and has
an option to select libssh; enabling that option causes unmet direct
dependencies of libssh:

    warning: (BR2_PACKAGE_KODI_LIBSSH) selects BR2_PACKAGE_LIBSSH which
    has unmet direct dependencies (BR2_USE_MMU && !BR2_STATIC_LIBS &&
    BR2_TOOLCHAIN_HAS_THREADS && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS
    && !BR2_PACKAGE_OPENSSL)

Fix this dependency by doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: use upstream patch to detect run-time NEON support

Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas: download patches directly from Github.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openal: add upstream patch to fix FPU related build failures

Fixes:

  http://autobuild.buildroot.net/results/b57/b5777a0ed33f6bb7a5fc0486ea21ecef58615dac/build-end.log

Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
 - download patch directly from Github.
 - add reference to autobuilder failure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jemalloc: add a check for valgrind being configured as well

jemalloc can be compiled with valgrind support being enabled
to produce proper output, so when the valgrind package has
been configured configure jemalloc appropriately.

In addition, make sure to disable valgrind support unconditionally in
the host variant of jemalloc.

Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtest: fix URL in package description

http://code.google.com/p/googletest redirects to
https://github.com/google/googletest, now.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Select required host tools for SD card generation

Select the required host tools for proper SD card generation.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Use U-Boot 2016.07

Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.

Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.

With this method the uboot-env.txt file is no longer needed, so it is
removed.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wandboard: Use kernel version 4.7.3

Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.

As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libusb: bump version to 1.0.20, switch to Github

This commit updates libusb to version 1.0.20, and adds a patch that
should fix parallel make issues particular to this version and probably
fixed in the next version.

This commit also moves to using Github as the source for libusb.

Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

legacy/kernel-headers: adjust recommended target

Previously they were set at next available version, which is problematic
since new syscalls can be introduced.
So switch to lower available.
There's a caveat for 3.1 and 3.0 headers though since there's no lower
than 3.2, so keep it at 3.2 for those unfortunately.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: remove deprecated versions

Linux headers 3.19.x and 4.0.x have been deprecated for a while now, so
it's time to remove them.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: fix unmet dependencies

Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:

    warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
    which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/weston: fix unmet dependencies

Properly propagate dependencies from freerdp to fix the following unmet
dependencies:

    warning: (BR2_PACKAGE_WESTON_RDP) selects BR2_PACKAGE_FREERDP which has
    unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR &&
    !BR2_STATIC_LIBS && BR2_TOOLCHAIN_HAS_THREADS && BR2_USE_MMU &&
    BR2_TOOLCHAIN_HAS_SYNC_4)

Reorder deps to have architectures deps first.

Remove "broken" dependency from comment; add missing ones.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/docker-engine: fix unmet dependencies

Properly propagate dependencies from docker-containerd to fix the
following unmet dependencies:

    warning: (BR2_PACKAGE_DOCKER_ENGINE_DAEMON) selects
    BR2_PACKAGE_DOCKER_CONTAINERD which has unmet direct dependencies
    (BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS &&
    BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS && BR2_TOOLCHAIN_HAS_THREADS &&
    BR2_USE_MMU && BR2_USE_WCHAR)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux/ext: fix Xenomai unmet dependencies

Properly propagate the Xenomai dependencies to the corresponding kernel
extension, to fix the following unmet dependencies:

    warning: (BR2_LINUX_KERNEL_EXT_XENOMAI) selects BR2_PACKAGE_XENOMAI
    which has unmet direct dependencies (BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
    && BR2_TOOLCHAIN_HAS_THREADS && !BR2_TOOLCHAIN_USES_MUSL)

While at it, move the comment lower, after the path option, so that the
path option is properly indented in the menuconfig.

Add markers to separate each extension.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: bump version

Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions that are required
for newer kernel series.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-firmware: add bluetooth firmware for intel chips

It probably makes no sense to try split them up by model since there
aren't that big.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/upmpdcli: bump to version 1.2.2

Upstream did not provide a hash file, so the hash was calculated
manually.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libupnpp: bump to version 0.15.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: bump to version 3.5.21

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

smcroute: bump to version 2.1.1

Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

luarocks: bump to version 2.4.0

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/galileo: switch back to the original kernel repo

This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962baf5668dbc623ae5d411b75f77d3384.

Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: glamor depends on libgl

Fixes
http://autobuild.buildroot.net/results/1f6/1f6131c25738577afd8e097d126e8166cbcfcdd8/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

leveldb: fix staging and target installation

The patch adding target/staging installation support needs variable names
update to account for upstream changes in version 1.19.

Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

leveldb: fix static build

Since version 1.19 Makefile variable names changed. Update the build command
accordingly.

While at it, remove variables that Makefile doesn't use anymore. This change
means that the static library is always build, even when BR2_SHARED_LIBS=y,
since the static library name is hard coded in leveldb Makefile.

Fixes:
http://autobuild.buildroot.net/results/00c/00c8c5a1d6001eaebfe2a9f848dd292c91bf6a79/

Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: Add support for warp7 board

Add support for warp7, which is a board based on NXP i.MX7S processor.

More information about warp7 can be found at:
https://www.element14.com/community/docs/DOC-79058

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Config.in: remove BR2_DEPRECATED_SINCE_2015_08

It's now unused.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgail: remove deprecated package

It's unused and has been deprecated for some time now.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webkit: remove deprecated package

It's been deprecated for quite a while and it's now replaced by the more
modern and up to date webkitgtk package.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Config.in: remove BR2_DEPRECATED_SINCE_2015_05

It's now unused.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: remove support for sh64

It's been deprecated for quite some time now.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/qemu: fix build of host variant

The Qemu buildsystem expects that the cpp it is passed can be called
like it were cc: it passes it the '-c' option, which is not allowed by
cpp, but is allowed for cc.

Fix that by overriding CPP when calling configure.

Note: the target variant of Qemu does not build the affected parts (the
PC-BIOS images). This is another problem that should be fixed separately.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: bump version to 2.28.2

--enable-findfs and --enable-lsblk configure options don't exist
anymore. Now, findfs and lsblk are always built by default unless you
pass --disable-all-programs to the configure script.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php: explicitly disable phpdbg

When building php, the package will also build/install phpdbg.
This patch explicitly disables this behaviour.

Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslog-ng: Bump version to 3.7.3

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslog-ng: add optional support for libnet build

If libnet is included pass --enable-spoof-source to configure otherwise
pass --disable-spoof-source. This stops syslog-ng's configure from
enabling address spoofing based on the build host having libnet
installed.

Fixes:

  http://autobuild.buildroot.net/results/71c733e4a7275f3a1b79cd19065d94e77af0309b
  http://autobuild.buildroot.net/results/d16ba0b9ef75d5a676a26db788be31556b69772a
  http://autobuild.buildroot.net/results/9659d1db1a128b269459fd9b8be797a9efbd35af

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc/gcc-final: Disable libcilkrts when using static libs

Disable libcilkrts when building static, as there is no static version:
https://software.intel.com/en-us/articles/intel-cilk-plus-runtime-library-libcilkrts-can-only-be-linked-dynamically/

Fixes the following toolchain build error when building for i386 and
BR2_STATIC_LIBS=y + BR2_TOOLCHAIN_BUILDROOT_CXX=y is set:

../../../libcilkrts/runtime/sysdep-unix.c:603:19:
fatal error: dlfcn.h: No such file or directory

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freetype: bump to version 2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: deprecate 2.24.x

Now that 2.26.x is stable and there's 2.25.x to fallback for whatever
reason it makes no sense to keep two versions back from default.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in: Add BR2_DEPRECATED_SINCE_2016_11

In preparation for new deprecated features/symbols.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: bump default to version 2.26.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: fix MIPS and SPARC builds for glibc < 2.24 with recent binutils

Backport two upstream patches to fix a build failure on MIPS and SPARC
architectures when using recent binutils versions. It appears that on
these architectures pt-vfork.S includes vfork.S (through the alpha
version of pt-vfork.S) and that the __vfork aliases are not
conditionalized on IS_IN (libc) like on other architectures. Therefore
the aliases are also wrongly included in libpthread.so.

The build failure looks like this:

/br/output/build/glibc-2.22/build/nptl/libpthread.so:(*IND*+0x0):
multiple definition of `vfork@GLIBC_2.0'
/br/output/build/glibc-2.22/build/nptl/libpthread.so::(.text+0xeea0):
first defined here

This problem was reported in Debian here:

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=827477

Upstream patches here:

https://sourceware.org/git/?p=glibc.git;a=commit;h=43c2948756bb6e144c7b871e827bba37d61ad3a3
https://sourceware.org/git/?p=glibc.git;a=commit;h=b87c1ec3fa398646f042a68f0ce0f7d09c1348c7

I have tweaked them a little bit in order to not patch the ChangeLog
file, otherwise it will fail.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

erlang-rebar: bump to version 2.6.4

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

harfbuzz: bump to version 1.3.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fbterm: fix download site

fbterm-1.7.0.tar.gz is no more accessible from http://fbterm.googlecode.com/files

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: bump to version 3.4.15

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: bump version to 2.2.0

- Adapt current patch for 2.2.0.

- Adapt gtk configure options for 2.2.0:
  - Instead of --enable-gtk3 or --enable-gtk2, now it uses
    --enable-gtk=[no/2/3/yes].

- Remove non-existing configure options:
  - --enable-usr-local: removed by
    https://code.wireshark.org/review/gitweb?p=wireshark.git;a=commit;h=125989780ba8e658ad0d1f1c71ec01e6d36a2266

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cifs-utils: bump to version 6.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/stress-ng: bump to 0.06.15

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/stress-ng: fix install commande

Don't use make install otherwise stress-ng will be rebuild without
required link libraries if any. Furthermore, using INSTALL allow to
set the file permission correcly on the target.

Fixes:
http://autobuild.buildroot.net/results/bba/bba4d0b635ab6849f969b8a0363ebe9f5fafd82e

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pugixml: add toolchain comment

Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

acpica: bump version to 20160831

New version has been build- and run-tested on x86_64 and aarch64.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pugixml: new package

pugixml is a light-weight C++ XML processing library. It features:
* DOM-like interface with rich traversal/modification capabilities
* Extremely fast non-validating XML parser which constructs the DOM tree from an XML file/buffer
* XPath 1.0 implementation for complex data-driven tree queries
* Full Unicode support with Unicode interface variants and automatic encoding conversions

Homepage: http://pugixml.org/
Repository: https://github.com/zeux/pugixml

Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lvm2: bump version to 2.02.165

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcurl: bump version to 7.50.2

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libpng: bump to version 1.6.25

1.6.23 tarballs have moved so, while we are at modifying libpng.mk, bump to 1.6.25.

[Peter: add back upstream sha1 hash]
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.7.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 4.7.x series to 4.7.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: bump 6.x series to 6.2.0

Adjust some patches to avoid patching the ChangeLog which isn't quite
the same.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/binutils: add binutils 2.27

And drop upstream patches.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/leveldb: bump version to 1.19

Rebased 0002-Add-install-recipe.patch

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/php: switch from libmysqlclient to mysqlnd

The Mysql Native Driver has been the default mysql driver since
PHP 5.4, but buildroot was still using libmysqlclient.

Mysqlnd has several advantages such as improved memory management
and the more favorable PHP licensing terms.
(can combine it with proprietary PHP extensions like Ioncube
loader, while libmysqlclient requires commercial licensing if you
link to it and do not fall under their GPL/FOSS license exception)

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/python-pillow: bump to version 3.3.1

This patch bumps python pillow to version 3.3.1

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtest: retrieve package from github

https://googletest.googlecode.com/files is no more available, so update
gtest.mk and gtest.hash to retrieve googletest source code as a tar.gz
(and not a zip) from github as https://googletest.googlecode.com is now
a redirection to https://github.com/google/googletest.

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/galileo: update to 3.14 kernel

This commit updates the kernel for Galileo board BSP from 3.8 to 3.14.

Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

domoticz: bump to version 87286ee (beta)

This version includes the patch on execinfo
(commit 775da272719b52bca37b44a40e935a1eb9d10466) so remove
the 0001-add-proper-check-for-detecting-header-execinfo.h.patch file

This version also fixes arc and musl build (ambiguous call to abs and
missing linux/ioctl header):
  http://autobuild.buildroot.net/results/b5406ca587592a3bac446d1f1df93d3eb45b96a9 fixed by commit 331cd7d6eef6f9f2658b91e662644d88c31eaf64
  http://autobuild.buildroot.net/results/62ec0d348153dff0efd4c1975a9198c17f01f1fa fixed by commit 6ea21db228124565466bf16b0400d40a5eaad30d

Due to DOS line endings, it is easier to reference this beta release
than converting git patches.
The stable release should be released in the first week of October.

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/freerdp: fix typo in x11 libs check

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: bump version to 1.5.4

For details see [1] and [2].

[1] https://lists.freedesktop.org/archives/input-tools/2016-August/001324.html
[2] https://lists.freedesktop.org/archives/input-tools/2016-August/001327.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: switch URLs to https

In order to avoid pointless redirects since they're 301.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst1-libav: bump to version 1.8.3

Now that we moved to ffmpeg 3.x the build and runtime (when patched) problems
have gone away.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: add powerpc64 arch support

Signed-off-by: Judd Meinders <judd.meinders@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/enlightenment: set eldbus-codegen path

Otherwise the one from the host may be used.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/enlightenment: bump to v0.21.2

Remove upstream patch.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>