board: bump armadeus apf28's kernel version to latest longterm (4.4.22)

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-u-msgpack: bump to version 2.2

Package archive includes a proper licence file now, so use it instead of
a source file.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: nitrogen*: bump kernel and u-boot revision

Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support

Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: Fix building for ARC700

With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.

Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).

Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.

[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add developer for Acme Systems boards

Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kvm-unit-tests: bump version

Most importantly this version includes a change to kvm-unit-tests which
means it will stop looking attempting to include host headers. This
change should fix build breakage on i386.

"ERROR: unsafe header/library path used in cross-compilation: '-I'
'/lib/modules/3.13.0-042stab111.12/build/include'"

The new version also includes more powerpc tests.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6dlsabreauto: Add ext4 rootfs option

Allow building a ext4 rootfs type.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6dlsabreauto: Use zImage by default

Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.

Remove the generation of uImage, so that the sdcard.img can successfully
boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6qsabreauto: Add ext4 rootfs option

Allow building a ext4 rootfs type.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6qsabreauto: Use zImage by default

Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.

Remove the generation of uImage, so that the sdcard.img can successfully
boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtkmm3: bump to version 3.22.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsigc: bump to version 2.10.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glibmm: bump to version 2.50.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: bump to version 3.22.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

adwaita-icon-theme: bump to version 3.22.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: bump to version 1.12.0

Also drop upstream patch.
Drop propietary RPI support since it's gone upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wayland: bump to version 1.12.0

And drop upstream patch.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wayland-protocols: bump to version 1.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx: Bump to U-Boot 2016.09.01

2016.09.01 is a bugfix release, so bump to this version.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: bump to version 2016.09.01

2016.09.01 is a bugfix release, so bump to this version.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/uboot: bump to version 2016.09.01

2016.09.01 is a bugfix release, so bump to this version.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

irssi: security bump to version 0.8.20

Fixes two remote crash issues since version 0.8.17

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gtksourceview: bump to version 3.22.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpg123: bump to version 1.23.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xproto_xproto: bump version to 7.0.31

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xlib_libXfont: bump version to 1.5.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-nouveau: bump version to 1.0.13

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-ati: bump version to 7.7.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-amdgpu: bump version to 1.1.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-input-libinput: bump version to 0.19.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro AArch64 toolchain

Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig.
As reported by Gustavo Zacarias, this defconfig is known to fail with qemu
versions lower than 2.6.0.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro ARMeb toolchain

The gdb version is 7.11.1 not 7.10 as stated in the link below [1].
See the manifest to check the version really used [2].

[1] https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05
[2] https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/armeb-linux-gnueabihf/gcc-linaro-5.3.1-2016.05-linux-manifest.txt

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro ARM toolchain

The gdb version is 7.11.1 not 7.10 as stated in the link below [1].
See the manifest to check the version really used [2].

Tested with Qemu 2.4.1 and qemu_arm_vexpress_defconfig.

[1] https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05
[2] https://releases.linaro.org/components/toolchain/binaries/5.3-2016.05/arm-linux-gnueabihf/gcc-linaro-5.3.1-2016.05-linux-manifest.txt

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xvisor: needs gcc >= 4.9

xvisor needs gcc >= 4.9, as previous versions trigger an ICE on
dwarf2out_frame_debug_adjust_cfa() [1].

Fixes:

 - http://autobuild.buildroot.net/results/fdb/fdb5a568fb38a9d20780cd37eecb71b60b6ca96a/

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60264

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xvisor: add BR2_PACKAGE_XVISOR_ARCH_SUPPORTS

To prepare the addition of a Config.in comment for xvisor, and avoid the
repetition of the architecture dependencies, this commits adds a new
BR2_PACKAGE_XVISOR_ARCH_SUPPORTS hidden option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba4: bump to version 4.4.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

stunnel: bump to version 5.36

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

btrfs-progs: bump to version 4.7.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.7.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 7}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-simpleaudio: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/linux-tools: don't register each tools twice

Because each tool's individual .mk files is included from the top-level
Makefile and we also include them from linux-tools.mk, they get
registered twice, and thus built twice, and thus installed twice.

We did include them from linux-tools.mk to guarantee they would be
included early and each tool had a chance to register itself before we
were to construct the build and install hooks.

However, the ordering is _currently_ guaranteed, in the C locale by the
files names, which we anyway sort using make's $(sort) function, which
always sorts in the C locale.

Beware if we are to ever rename those files in the future...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/acmesystems_arietta_g25: update kernel and at91bootstrap3

- configs/acmesystems_arietta_g25_128mb_defconfig,
  configs/acmesystems_arietta_g25_256mb_defconfig :
  update default configuration files for both 128MB and 256MB version

- board/acmesystems/arietta-g25/genimage.cfg
  board/acmesystems/arietta-g25/post-image.sh :
  improve 'post-image.sh' and 'genimage.cfg' used to build sdcard.img

- board/acmesystems/arietta-g25/readme.txt :
  update documentation for Arietta G25

Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Acked-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot/at91bootstrap3: bump to version 3.8.6

Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6qsabresd: Add ext4 rootfs option

Allow building a ext4 rootfs type.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6qsabresd: Use zImage by default

Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.

Remove the generation of uImage, so that the sdcard.img can successfully
boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-userland: bump version

- rebased patches (using git) to fix patch conflicts

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-firmware: bump version

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi3_defconfig: bump to kernel version 4.4.21

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi2_defconfig: bump to kernel version 4.4.21

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi_defconfig: bump to kernel version 4.4.21

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi0_defconfig: bump to kernel version 4.4.21

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openssl: security bump to version 1.0.2i

https://www.openssl.org/news/secadv/20160922.txt

Fixes
SSL_peek() hang on empty record (CVE-2016-6305)
SWEET32 Mitigation (CVE-2016-2183)
OOB write in MDC2_Update() (CVE-2016-6303)
Malformed SHA512 ticket DoS (CVE-2016-6302)
OOB write in BN_bn2dec() (CVE-2016-2182)
OOB read in TS_OBJ_print_bio() (CVE-2016-2180)
Pointer arithmetic undefined behaviour (CVE-2016-2177)
Constant time flag not preserved in DSA signing (CVE-2016-2178)
DTLS buffered message DoS (CVE-2016-2179)
DTLS replay protection DoS (CVE-2016-2181)
Certificate message OOB reads (CVE-2016-6306)
Excessive allocation of memory in tls_get_message_header()
  (CVE-2016-6307)
Excessive allocation of memory in dtls1_preprocess_fragment()
  (CVE-2016-6308)

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ola: add patch to fix build with GCC 6

Fixes:
http://autobuild.buildroot.net/results/2d5/2d55b5d88a06c7b8e6baeb96973009a451e992d9/
http://autobuild.buildroot.net/results/899/89922e61c583cf1d11bd0bafdd5586c35d8f6e15/
http://autobuild.buildroot.net/results/d5b/d5b8fe66ff8d9ea91e87ef6fbe8274f5e24aa7b0/
http://autobuild.buildroot.net/results/89b/89b136e6dced6ca9842a1f23141b0cb999f783da/
.. and many more.

Building OLA with a GCC 6 cross-toolchain fails:

```
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I.   -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os
-pthread -c -o libs/acn/e131_transmit_test.o
libs/acn/e131_transmit_test.cpp
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I.   -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os
-pthread -c -o libs/acn/E131TestFramework.o
libs/acn/E131TestFramework.cpp
In file included from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/ext/string_conversions.h:41:0,
                 from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/bits/basic_string.h:5402,
                 from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/string:52,
                 from ./tools/ola_trigger/config.ypp:2:
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/cstdlib:75:25:
fatal error: stdlib.h: No such file or directory
 #include_next <stdlib.h>
                         ^
compilation terminated.
```

The C++ library in GCC 6 now provides its own `<stdlib.h>` header that
wraps the C library header of the same name, so in `<cstdlib>` the
header include

```
#include <stdlib.h>
```

has become

```
#include_next <stdlib.h>
```

`#include_next` is sensitive to the order of directories in the
preprocessor's search path, so if that order is changed with `-isystem`
then the compiler can't find the right header:

```
[1] /usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include
[2] /opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0
[..]
End of search list.
```

`<cstdlib>` is located in [2] whereas `<stdlib.h>` (C library header) is
in [1]. In this case, the `#include_next <stdlib.h>` statement in
`<cstdlib>`, located in [2], is evaluated **after** the search path [1],
so the compiler does not find the right system header.

The problem here is that the OLA build system replaces the `-I` in the CFLAGS
from libprotobuf with `-isystem` to fix some warnings treated as errors
in the libprotobuf header files.

`-isystem` should be used to suppress warnings in system headers only
and the libprotobuf header files are not system files.

The correct fix is to compile with less restrictions and remove
`-Werror` for the build. This is already done by passing
`--disable-fatal-warnings` to OLA.

Fix the reordering of the GCC search paths by removing the replacement of
`-I` with `-isystem`.

Upstream status: https://github.com/OpenLightingProject/ola/pull/1126

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ola: disable fatal warnings for host variant

By default the build system of OLA passes '-Werror' to GCC. The aborts
compilation with GCC 6:

'''
error: ‘template<class> class std::auto_ptr’ is deprecated
[-Werror=deprecated-declarations]
'''

The target variant already passes the option "-disable-fatal-warnings"
to the build system to disable '-Werror'. Do it for the host variant to
to fix build with host GCC 6.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ola: bump to version 0.10.2

Remove fetching upstream which was needed to fix musl build issue.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/acmesystems_aria_g25: update and add genimage handling

- configs/acmesystems_aria_g25_128mb_defconfig,
  configs/acmesystems_aria_g25_256mb_defconfig :
  update default configuration files for both 128MB and 256MB version

- board/acmesystems/aria-g25/genimage.cfg
  board/acmesystems/aria-g25/post-image.sh :
  add support for genimage in order to build sdcard.img

- board/acmesystems/aria-g25/readme.txt : update documentation
  for Aria G25 and add notes about how to build sdcard.img

Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: change developer for gst1-rtsp-server

Piotr Nakraszewicz no longer works at Imgtec, and Abhilash Tuse
volunteered to take care of this package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add entries for recently added/modified code

This commit updates the DEVELOPERS files with packages or defconfigs
recently added, plus additional entries for developers who have modified
packages they are usually taking care of.

Cc: Christian Stewart <christian@paral.in>
Cc: Cyril Bur <cyrilbur@gmail.com>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Manuel Vögele <develop@manuel-voegele.de>
Cc: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Piotr Nakraszewicz <piotr.nakraszewicz@imgtec.com>
Cc: Romain Perier <romain.perier@free-electrons.com>
Cc: Theo Debrouwere <t.debrouwere@televic.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-tools: fix include path

The .mk files in linux-tools are named linux-tool-*.mk, not
linux-ext-*.mk.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: update the linux tools section

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
[Thomas:
 - Adjust the Config.in example to show that we now need to "select
   BR2_PACKAGE_LINUX_TOOLS"
 - Adjust the .mk file example to use $(LINUX_DIR) instead of $(@D)]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux/tools: make it a real, separate package

The kernel source tree also contains the sources for various userland
tools, of which cpupower, perf or selftests.

Currently, we have support for building those tools as part of the
kernel build procedure. This looked the correct thing to do so far,
because, well, they *are* part of the kernel source tree and some
really have to be the same version as the kernel that will run.

However, this is causing quite a non-trivial-to-break circular
dependency in some configurations. For example, this defconfig fails to
build (similar to the one reported by Paul):

    BR2_arm=y
    BR2_cortex_a7=y
    BR2_ARM_FPU_NEON_VFPV4=y
    BR2_TOOLCHAIN_EXTERNAL=y
    BR2_INIT_SYSTEMD=y
    BR2_LINUX_KERNEL=y
    BR2_LINUX_KERNEL_CUSTOM_GIT=y
    BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
    BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="26f3b72a9c049be10e6af196252283e1f6ab9d1f"
    BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
    BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
    BR2_PACKAGE_CRYPTODEV=y
    BR2_PACKAGE_OPENSSL=y
    BR2_PACKAGE_LIBCURL=y

This causes a circular dependency, as explained by Thomas:

 - When libcurl is enabled, systemd depends on it

 - When OpenSSL is enabled, obviously, will use it for SSL support

 - When cryptodev-linux is enabled, OpenSSL will depend on it to use
   crypto accelerators supported in the kernel via cryptodev-linux.

 - cryptodev-linux being a kernel module, it depends on linux

 - linux by itself (the kernel) does not depend on pciutils, but the
   linux tool "cpupower" (managed in linux-tool-cpupower) depends on
   pciutils

 - pciutils depends on udev when available

 - udev is provided by systemd.

And indeed, during the build, we can see that make warns (it's only
reported as a *warning*, not as an actual error):

    [...]
    make[1]: Circular /home/ymorin/dev/buildroot/O/build/openssl-1.0.2h/.stamp_configured
    <- cryptodev-linux dependency dropped.
    >>> openssl 1.0.2h Downloading
    [...]

So the build fails later on, when openssl is actually built:

    eng_cryptodev.c:57:31: fatal error: crypto/cryptodev.h: No such file or directory
    compilation terminated.
    <builtin>: recipe for target 'eng_cryptodev.o' failed

Furthermore, graph-depends also detects the circular dependency, but
treats it as a hard-error:

    Recursion detected for  : cryptodev-linux
    which is a dependency of: openssl
    which is a dependency of: libcurl
    which is a dependency of: systemd
    which is a dependency of: udev
    which is a dependency of: pciutils
    which is a dependency of: linux
    which is a dependency of: cryptodev-linux
    Makefile:738: recipe for target 'graph-depends' failed

Of course, there is no way to break the loop without losing
functionality in either one of the involved packages *and* keep
our infrastructure and packages as-is.

The only solution is to break the loop at the linux-tools level, by
moving them away into their own package, so that the linux package will
no longer have the opportunity to depend on another package via a
dependency of one the tools.

All three linux tools are thus moved away to their own package.

The package infrastructure only knows of three types of packages: those
in package/ , in boot/ , in toolchain/ and the one in linux/ . So we
create that new linux-tools package in package/ so that we don't have to
fiddle with yet another special case in the infra. Still, we want its
configure options to appear in the kernel's sub-menu.

So, we make it a prompt-less package, with only the tools visible as
options of that package, but without the usual dependency on their
master symbol; they only depend on the Linux kernel.

Furthermore, because the kernel is such a huge pile of code, we would
not be very happy to extract it a second time just for the sake of a few
tools. We can't extract only the tools/ sub-directory from the kernel
source either, because some tools have hard-coded path to includes from
the kernel (arch and stuff).

Instead, we just use the linux source tree as our own build tree, and
ensure the linux tree is extracted and patched before linux-tools is
configured and built.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Paul Ashford <paul.ashford@zurria.co.uk>
[Thomas:
 - fix typo #(@D) -> $(@D)
 - fix the inclusion of the per-tool .mk files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: list the a20_olinuxino boards under my name

I own a A20 Micro, I contributed the defconfig for it and I test it
still works from time to time.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: fix typo

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

genimage: bump to version 9

[Peter: add _LICENSE_FILES]
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jsoncpp: bump to version 1.7.5

Remove patch applied upstream in commit
d4a49cf511a9ef5ee52af83f8aed4437eaa160e1.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs: website: update for 2016.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: fix typo in 2016.08 release line

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libxslt: fix bfin compile

Fixes:
http://autobuild.buildroot.org/results/df4/df4bf247c92847024dff88ce58a5f47343f06258/
http://autobuild.buildroot.org/results/b33/b33f34dc23f7429928d7d0b1478e71d8e7fffed2/
http://autobuild.buildroot.org/results/cad/cad02570ec039511b9495e82d98439e9f0724b37/

And many more.

A GCC bug is triggered when the compiler is run with an optimization level
'-Os/-O2/-O3' for the Blackfin architecture:

```
error: unable to find a register to spill in class 'CCREGS'
```

Workaround this bug by forcing an optimization level of '-O1' when building
libxslt for the Blackfin architecture.

See GCC bug report:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=77311

[Peter: add reference to autobuilders failures]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

evemu: bump version to 2.5.0

See [1] for details.

[1] https://lists.freedesktop.org/archives/input-tools/2016-September/001330.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: update my entry list

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: fix removed packages or inexisting packages

elementary, libevas-generic-loaders and smtools3 no longer exist.

pygame doesn't exist, it's named python-pygame.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-daemon: add missing dependencies

python-daemon package mentions python-docutils in both setup_requires
and instal_requires fields. So add related dependencies.

Fixes:
http://autobuild.buildroot.net/results/0c3/0c3866038f7c40888e5e440f7a720fc614a6b1ba/
http://autobuild.buildroot.net/results/5d8/5d817bddeff5bb49ed31c6a1d111974c358ef96c/
and many more.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-docutils: new package

Host variant is needed for building python-daemon package.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: improve license description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

trinity: needs MMU support

Fixes:
  http://autobuild.buildroot.net/results/2fc/2fca707deb6fda2da83ab817f8e594f76415d997/

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

circus, python-psutil: fix syntax in Config.in

After commit ab930190d775 ("python-psutil: not available on musl")
we are getting following error when we set defconfig

package/python-psutil/Config.in:14: syntax error
package/python-psutil/Config.in:13: invalid option
package/circus/Config.in:21: syntax error
package/circus/Config.in:20: invalid option

Fixes: ab930190d775 ("python-psutil: not available on musl")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-psutil: not available on musl

Fixes:
http://autobuild.buildroot.net/results/365/365c2f0b32ae3cb1d6d4d8f0145500dfadd05c59/
http://autobuild.buildroot.org/results/140/140d0ec9d94f75453c4c82e18803c8d7bffcf6be/

And many more.

The sysinfo structure definition in linux/sysinfo.h (which gets indirectly
included from linux/kernel.h) conflicts with the definition in sys/sysinfo.h
when building against the musl C library, leading to build failures:

arm-linux-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes \
 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fPIC -DPSUTIL_VERSION=430 \
  -c psutil/_psutil_linux.c -o build/temp.linux-x86_64-3.5/psutil/_psutil_linux.o
In file included from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/kernel.h:4:0,
                 from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/ethtool.h:16,
                 from psutil/_psutil_linux.c:35:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/sysinfo.h:7:8: error: redefinition of 'struct sysinfo'
 struct sysinfo {
        ^
In file included from psutil/_psutil_linux.c:21:0:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here

The suggested solution by the musl developers is to duplicate the needed
structures and defines inline instead of including the kernel headers, which
is unlikely to be acceptable upstream - So instead mark python-psutil (and
its reverse dependencies) as unavailable on musl.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: fix packages having a subdirectory

efl and matchbox no longer have a subdirectory containing multiple
packages, so they are no longer good examples of that. Mention qt5 and
gstreamer instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shapelib: new package

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
 - adjust the license: it's MIT or LGPLv2, add web/license.html to the
   license files
 - rewrap Config.in help text
 - add entry to the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: add new section about the DEVELOPERS file and get-developer

[Peter: tweak wording and add xref as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: update contribute.txt to cover get-developers

This commit updates the contribute.txt part of the manual to tell
people to use get-developers to get the appropriate "git send-email"
command when sending patches.

[Peter: use --cc instead of --to as suggested by Yann/Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add initial list of Buildroot developers

This is an initial list of Buildroot developers. It has been created
semi-automatically by parsing the Git history, and finding the authors
of commits with a title like "<foo>: new package". Some additional
manual tweaking has been done (merging multiple entries corresponding to
the same person, adding some more entries, etc.).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/get-developers: add new script

This script, and its companion library, is more-or-less Buildroot's
equivalent to the kernel get_maintainer.pl script: it allows to get the
list of developers to whom a set of patches should be sent to.

To do so, it first relies on a text file, named DEVELOPERS, at the root
of the Buildroot source tree (added in a followup commit) to list the
developers and the files they are interested in. The DEVELOPERS file's
format is simple:

N:     Firstname Lastname <email>
F:     path/to/file
F:     path/to/another/file

This allows to associate developers with the files they are looking
after, be they related to a package, a defconfig, a filesystem image, a
package infrastructure, the documentation, or anything else.

When a directory is given, the tool assumes that the developer handles
all files and subdirectories in this directory. For example
"package/qt5/" can be used for the developers looking after all the Qt5
packages.

Conventional shell patterns can be used, so "package/python-*" can be
used for the developers who want to look after all packages matching
"python-*".

A few files are recognized specially:

 - .mk files are parsed, and if they contain $(eval
   $(<something>-package)), the developer is assumed to be looking after
   the corresponding package. This way, autobuilder failures for this
   package can be reported directly to this developer.

 - arch/Config.in.<arch> files are recognized as "the developer is
   looking after the <arch> architecture". In this case, get-developer
   parses the arch/Config.in.<arch> to get the list of possible BR2_ARCH
   values. This way, autobuilder failures for this package can be
   reported directly to this developer.

 - pkg/pkg-<infra>.mk are recognized as "the developer is looking after
   the <infra> package infrastructure. In this case, any patch that adds
   or touches a .mk file that uses this infrastructure will be sent to
   this developer.

Examples of usage:

$ ./support/scripts/get-developers 0001-ffmpeg-fix-bfin-build.patch
git send-email--to buildroot@buildroot.org --to "Luca Ceresoli <luca@lucaceresoli.net>" --to "Bernd Kuhls <bernd.kuhls@t-online.de>"

$ ./support/scripts/get-developers -p imx-lib
Arnout Vandecappelle <arnout@mind.be>
Gary Bisson <gary.bisson@boundarydevices.com>

$ ./support/scripts/get-developers -a bfin
Waldemar Brodkorb <wbx@openadk.org>

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: switch to gcc 5.x as the default

gcc 4.9.4 was the last release of the 4.9.x branch, and the gcc
developes will now only be maintaining gcc 5.x and 6.x:

  https://gcc.gnu.org/ml/gcc-announce/2016/msg00002.html

Therefore, it is time to use gcc 5.x as the default version in
Buildroot. We have been having toolchains in the autobuilders with gcc
5.x for a while, so the vast majority of the problems should have
already been solved.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

e2fsprogs: fix linking against librt

Our previous patch to link against librt to access clock_gettime() was
merged upstreamed... but it lacked a crucial part which makes the whole
thing useless: $(CLOCK_GETTIME_LIB) is always empty from a make point of
view.

This commit adds a patch to e2fsprogs to fix the problem.

Fixes:

  http://autobuild.buildroot.net/results/41ea60bebfc741604a5499df74363b498ad77a48/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libglib2: add host-util-linux for host variant

It's required now, fixes:
http://autobuild.buildroot.net/results/e81/e81f98561867d370115a019284682c0611796978/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

util-linux: enable libmount for host variant

It's a necessary dependency to build the new host-libglib2.
libblkd is an indirect dependency for libmount.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: rename option for ARC gcc

The ARC gcc version is now based on gcc 6.x and no longer gcc 4.8.x,
which makes the option BR2_GCC_VERSION_4_8_ARC a bit irrelevant, as is
the prompt of this option.

This commit therefore renames this option to BR2_GCC_VERSION_ARC, and
adjust its prompt as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nvidia-driver: update version

This new version brings in support for egl-wayland, the EGL extensions
aimed at making it possible to implement Wayland servers and clients. As
such, nvidia-driver becomes the second EGL implementation in Buildroot
that can act as a libegl provider with egl-wayland extensions.

In this version, it becomes possible to use our kernel-module infra,
with just a little few minor tricks: we need just specify the Linux
source and build trees (they are the same for us) and the list of
modules to build. We still need a little patch against the Kbuild files.

We also get rid of the LIBS_NO_VERSION trick and always use complete
filenames, as more libs are now packaged with different version in their
filenames, and even some with no version at all.

When installing libs, we switch from a shell loop to a make foreach
loop, which is easier to handle. It has the side-effect (and advantage)
of displaying the install commands for each library, rather than a
single biggish one, so it is easier to see what goes wrong. This also
means that an error in each phase of the install (the copy of the files
then each symlink) can be caught more easily (it was not previously):
each sequence is now its own make command; we need not use "|| exit 1"
after each command, even in a if block, because the if blocks returns
with the exit code of the last command in it; e.g. if an ln fails, the
if-block in which it is enclosed will return the exit code of ln, and
make will catch it.

Similarly for the X driver modules and each of the programs installed:
we now can catch any failure in the isntall of those.

All of this somewhat simplifies the .mk. It is a little bit longer, but
the structure is saner and more explicit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyqt5: new package

Signed-off-by: Manuel Vögele <develop@manuel-voegele.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/socat: fix build issue

Fix two build issue when socat is build with musl:
  - Set NETDB_INTERNAL locally since it's not provided by musl
  - remove if_tun.h kernel header

Fixes:
http://autobuild.buildroot.net/results/029/02977d3844ef62b1e9cbfbab244593632757c5e2

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add upstream patch to fix glog build on bfin

glog has been failing on bfin because of issue in uclibc which is now
fixed in upstream.

Fixes:
  http://autobuild.buildroot.net/results/a10/a10ed48e6eb8411a3d8372f57c05fd11130da0e0/

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

vala: bump to version 0.34.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

atk: bump to version 2.22.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdk-pixbuf: bump to version 2.36.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsoup: bump to version 2.56.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gvfs: bump to version 1.30.0

Disable admin since it requires polkit-gobject + libcap.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glib-networking: bump to version 2.50.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libglib2: bump to version 2.50.0

It now requires util-linux libmount so add the dependency/select.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ushare: fix build with NLS support

Add patch to fix build errors when NLS support is enabled.

Fixes:

  http://autobuild.buildroot.net/results/19d/19d67dd43e5a313c77e4be97ecb9811ffa52f797/

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>