* elf32-arm.c (find_stub_size_and_template): Avoid uninitialized
var warning at -O3.

* opncls.c (bfd_alloc, bfd_zalloc): Don't mark internal.
* libbfd-in.h (bfd_alloc, bfd_zalloc): Don't declare here.
* libbfd.h: Regenerate
* bfd-in2.h: Regenerate.

* plugin.c (plugin_get_ir_dummy_bfd): Set bfd_use_reserved_id.
Formatting.

* opncls.c (_bfd_id_counter): Rename to bfd_id_counter.
(bfd_reserved_id_counter, bfd_use_reserved_id): New vars.
(_bfd_new_bfd): Use negative id when bfd_use_reserved_id.
(bfd_create): Doc fix.
* bfd-in2.h: Regenerate.

PR gas/12049
* write.c (relax_frag): Don't allow forward branches to temporarily
becomde backward branches.

*** empty log message ***

daily update

* gas/mips/mips.exp: Simplify enabling of MIPS16 testing.

* gas/mips/at-1.d: Handle ECOFF relocations.
* gas/mips/eret-1.d: Handle ECOFF.
* gas/mips/eret-2.d: Likewise.
* gas/mips/eret-3.d: Likewise.
* gas/mips/mips.exp: Only run "aent" for ELF.

* gas/mips/ld.s: Adjust to let SD, L.D, S.D, LDC1 and SDC1
macros to be tested, according to the "tsd", "tl_d", "ts_d",
"tldc1" and "tsdc1" symbols.
* gas/mips/sd.d: New test.
* gas/mips/ecoff@sd.d: Likewise, ECOFF version.
* gas/mips/mips1@ecoff@sd.d: Likewise, MIPS I/ECOFF version.
* gas/mips/r3000@ecoff@sd.d: Likewise, R3000/ECOFF version.
* gas/mips/r3900@ecoff@sd.d: Likewise, R3900/ECOFF version.
* gas/mips/mips2@ecoff@sd.d: Likewise, MIPS II/ECOFF version.
* gas/mips/mips32@ecoff@sd.d: Likewise, MIPS32/ECOFF version.
* gas/mips/mips32r2@ecoff@sd.d: Likewise, MIPS32r2/ECOFF
version.
* gas/mips/sd-forward.d: New test.
* gas/mips/ecoff@sd-forward.d: Likewise, ECOFF version.
* gas/mips/mips1@ecoff@sd-forward.d: Likewise, MIPS I/ECOFF
version.
* gas/mips/r3000@ecoff@sd-forward.d: Likewise, R3000/ECOFF
version.
* gas/mips/r3900@ecoff@sd-forward.d: Likewise, R3900/ECOFF
version.
* gas/mips/mips2@ecoff@sd-forward.d: Likewise, MIPS II/ECOFF
version.
* gas/mips/mips32@ecoff@sd-forward.d: Likewise, MIPS32/ECOFF
version.
* gas/mips/mips32r2@ecoff@sd-forward.d: Likewise, MIPS32r2/ECOFF
version.
* gas/mips/l_d.d: New test.
* gas/mips/mips1@l_d.d: Likewise, MIPS I version.
* gas/mips/r3000@l_d.d: Likewise, R3000 version.
* gas/mips/r3900@l_d.d: Likewise, R3900 version.
* gas/mips/l_d-forward.d: New test.
* gas/mips/mips1@l_d-forward.d: Likewise, MIPS I version.
* gas/mips/r3000@l_d-forward.d: Likewise, R3000 version.
* gas/mips/r3900@l_d-forward.d: Likewise, R3900 version.
* gas/mips/s_d.d: New test.
* gas/mips/mips1@s_d.d: Likewise, MIPS I version.
* gas/mips/r3000@s_d.d: Likewise, R3000 version.
* gas/mips/r3900@s_d.d: Likewise, R3900 version.
* gas/mips/s_d-forward.d: New test.
* gas/mips/mips1@s_d-forward.d: Likewise, MIPS I version.
* gas/mips/r3000@s_d-forward.d: Likewise, R3000 version.
* gas/mips/r3900@s_d-forward.d: Likewise, R3900 version.
* gas/mips/ldc1.d: New test.
* gas/mips/ldc1-forward.d: Likewise.
* gas/mips/sdc1.d: Likewise.
* gas/mips/sdc1-forward.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/sd-f-n32.d: Likewise.
* gas/mips/sd-f-n64.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/l_d-f-n32.d: Likewise.
* gas/mips/l_d-f-n64.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/s_d-f-n32.d: Likewise.
* gas/mips/s_d-f-n64.d: Likewise.
* gas/mips/ldc1-n32.d: Likewise.
* gas/mips/ldc1-n64.d: Likewise.
* gas/mips/ldc1-f-n32.d: Likewise.
* gas/mips/ldc1-f-n64.d: Likewise.
* gas/mips/sdc1-n32.d: Likewise.
* gas/mips/sdc1-n64.d: Likewise.
* gas/mips/sdc1-f-n32.d: Likewise.
* gas/mips/sdc1-f-n64.d: Likewise.
* gas/mips/mips.exp: Run the new tests.

* gas/mips/ld.s: Adjust to let data objects be only
defined/declared (as appropriate) at the end of assembly, based
on the presence or not of the "forward" symbol.
* gas/mips/ld-forward.d: New test.
* gas/mips/mips1@ld-forward.d: Likewise. MIPS I version.
* gas/mips/r3000@ld-forward.d: Likewise, R3000 version.
* gas/mips/ecoff@ld-forward.d: Likewise, ECOFF version.
* gas/mips/r3900@ecoff@ld-forward.d: Likewise, R3900/ECOFF
version.
* gas/mips/mips2@ecoff@ld-forward.d: Likewise, MIPS II/ECOFF
version.
* gas/mips/mips32@ecoff@ld-forward.d: Likewise, MIPS32/ECOFF
version.
* gas/mips/mips32r2@ecoff@ld-forward.d: Likewise, MIPS32r2/ECOFF
version.
* gas/mips/ld-n32-forward.d: New test.
* gas/mips/ld-n64-forward.d: Likewise.
* gas/mips/mips.exp: Run the new tests.

* gas/mips/ld-n32.d: New test.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/mips.exp: Run the new tests.

* gas/mips/ld.d: Rename to...
* gas/mips/mips1@ld.d: ... this.
* gas/mips/ld-ilocks.d: Rename to...
* gas/mips/ld.d: ... this.
* gas/mips/r3000@ld.d: New test, R3000 version.
* gas/mips/ecoff@ld.d: Likewise, ECOFF version.
* gas/mips/r3900@ecoff@ld.d: Likewise, R3900/ECOFF version.
* gas/mips/mips2@ecoff@ld.d: Likewise, MIPS II/ECOFF version.
* gas/mips/mips32@ecoff@ld.d: Likewise, MIPS32/ECOFF version.
* gas/mips/mips32r2@ecoff@ld.d: Likewise, MIPS32r2/ECOFF version.
* gas/mips/mips.exp: Remove "ld-ilocks" and run "ld" over all
architectures matching "mips1".

* gas/mips/mips.exp (run_dump_test_arch): Check for the presence
of a file-format-specific test too.
(run_dump_test_arches): Pull elf, ecoff and aout variables for
use by the above.

* gas/mips/ld.s: Remove "l.d", "s.d" and "sd" instructions.
* gas/mips/ld.d: Adjust accordingly.
* gas/mips/ld-ilocks.d: Likewise

* gas/mips/ld.s: Remove ".set mips1".
* gas/mips/ld.d: Remove "-march=r4000" and "-mmips:4000" from
gas/objdump options.
* gas/mips/ld-ilocks.d: Add "-32" to gas options.
* gas/mips/mips.exp: Run the two cases with run_dump_test_arches.

* gas/mips/ld.s: Remove MIPS III bits.
* gas/mips/ld.d: Adjust accordingly.
* gas/mips/ld-ilocks.d: Likewise.
* gas/mips/ld-ilocks-addr32.d: Remove file.
* gas/mips/mips.exp: Adjust accordingly.

* gas/mips/ld.d: Spell out reloc names.
* gas/mips/ld-ilocks.d: Likewise.
* gas/mips/ld-ilocks-addr32.d: Likewise.

*** empty log message ***

daily update

2010-10-23  Mark Mitchell  <mark@codesourcery.com>

* config/obj-elf.c (elf_adjust_symtab): New.  Move group section
processing here from elf_frob_file.  Ensure that group signature
symbols have the name of the group.
(elf_frob_file): Move group section processing to
elf_adjust_symtab.
* config/obj-elf.h (elf_adjust_symtab): Declare.
(obj_adjust_symtab): Define.
* config/tc-arm.c (arm_adjust_symtab): Call elf_adjust_symtab.

2010-10-23  Mark Mitchell  <mark@codesourcery.com>

* gas/elf/elf.exp: Add group0c test.
* gas/elf/group0c.d: New.
* gas/elf/group0a.d: Expect ".group" for the name of group
sections.
* gas/elf/group0b.d: Likewise.
* gas/elf/group1a.d: Likewise.
* gas/elf/group1b.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/groupautob.d: Likewise.
* gas/elf/section4.d: Likewise.
* gas/ia64/group-1.d: Likewise.  Adjust hard-coded constants.

2010-10-22  Mark Mitchell  <mark@codesourcery.com>

* binutils-all/group-5.d: Expect ".group" for the name of group
sections.
* binutils-all/strip-2.d: Likewise.

2010-10-23  Mark Mitchell  <mark@codesourcery.com>

* ld-elf/group10.d: Expect ".group" for the name of group
sections.
* ld-elf/group2.d: Likewise.
* ld-elf/group7.d: Likewise.

merge from gcc

*** empty log message ***

daily update

ld:
* emulparams/elf32_sparc_sol2.sh (OUTPUT_FORMAT): Set to
elf32-sparc-sol2.
* emulparams/elf64_sparc_sol2.sh (OUTPUT_FORMAT): Set to
elf64-sparc-sol2.

gas:
* config/tc-sparc.h [TE_SOLARIS] (ELF_TARGET_FORMAT): Define as
elf32-sparc-sol2.
(ELF64_TARGET_FORMAT): Define as elf64-sparc-sol2.

bfd:
* elfxx-sparc.c (tpoff): Define bed, static_tls_size.
Consider static_tls_alignment.

* elf32-sparc.c (TARGET_BIG_SYM): Redefine to
bfd_elf32_sparc_sol2_vec.
(TARGET_BIG_NAME): Redefine to elf32-sparc-sol2.
(elf32_bed): Redefine to elf32_sparc_sol2_bed.
(elf_backend_static_tls_alignment): Redefine to 8.
Include elf32-target.h.
(elf_backend_static_tls_alignment): Undef again for VxWorks.

* elf64-sparc.c (TARGET_BIG_SYM): Redefine to
bfd_elf64_sparc_sol2_vec.
(TARGET_BIG_NAME): Redefine to elf64-sparc-sol2.
(ELF_OSABI): Undef.
(elf64_bed): Redefine to elf64_sparc_sol2_bed.
(elf_backend_static_tls_alignment): Redefine to 16.
Include elf64-target.h.

* config.bfd (sparc-*-solaris2.[0-6]): Split from sparc-*-elf*.
Set targ_defvec to bfd_elf32_sparc_sol2_vec.
[BFD64] (sparc-*-solaris2*): Set targ_defvec to
bfd_elf32_sparc_sol2_vec.
Replace bfd_elf64_sparc_vec by bfd_elf64_sparc_sol2_vec in
targ_selvecs.

* configure.in: Handle bfd_elf32_sparc_sol2_vec,
bfd_elf64_sparc_sol2_vec.
* configure: Regenerate.

* targets.c (bfd_elf32_sparc_sol2_vec): Declare.
(bfd_elf64_sparc_sol2_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_sparc_sol2_vec,
bfd_elf64_sparc_sol2_vec.

    * gas/all/fwdexp.d: Also look for f8ffffff.
        * gas/arm/msr-reg-thumb.d: Skip for non-ELF based targets.
        * gas/arm/vldr.d: Likewise.
        * gas/arm/thumb2_ldmstm.d: Allow for extra NOPs at the end of the disassembly.
        * gas/cfi/cfi.exp (cfi-arm-1): Only run for ELF based ARM targets.

*** empty log message ***

* Makefile.am (CLEANFILES): Add stamp-lm32.  Sort.
* Makefile.in: Regenerate.

* Makefile.in (install): Remove dependency of install-only and
recursively invoke make for install-only.
* data-directory/Makefile.in: Add FLAGS_TO_PASS variable.
(install): Pass FLAGS_TO_PASS when recursively make install-only.

gdbserver/
* Makefile.in: Add FLAGS_TO_PASS variable.
(install): Remove dependency of install-only and recursively
invoke make for install-only.

* ldwrite.c (build_link_order <lang_data_statement_enum>): Don't
output when section has no contents.
(build_link_order <lang_reloc_statement_enum>): Likewise.

daily update

bfd:
* elf32-tic6x.c (elf32_tic6x_merge_arch_attributes): Update for
attribute renaming.
(elf_backend_obj_attrs_section): Change to ".c6xabi.attributes".

binutils:
* readelf.c (display_tic6x_attribute): Update for attribute
renaming.

gas:
* config/tc-tic6x.c (tic6x_arch_attribute, tic6x_arches,
md_assemble, tic6x_set_attributes): Update for attribute renaming.
* doc/c-tic6x.texi: Update for attribute renaming.

gas/testsuite:
* gas/tic6x/attr-arch-directive-1.d,
gas/tic6x/attr-arch-directive-2.d,
gas/tic6x/attr-arch-directive-3.d,
gas/tic6x/attr-arch-directive-4.d,
gas/tic6x/attr-arch-directive-4.s,
gas/tic6x/attr-arch-directive-5.d,
gas/tic6x/attr-arch-directive-5.s,
gas/tic6x/attr-arch-opts-c62x.d, gas/tic6x/attr-arch-opts-c64x+.d,
gas/tic6x/attr-arch-opts-c64x.d, gas/tic6x/attr-arch-opts-c674x.d,
gas/tic6x/attr-arch-opts-c67x+.d, gas/tic6x/attr-arch-opts-c67x.d,
gas/tic6x/attr-arch-opts-none-1.d,
gas/tic6x/attr-arch-opts-none-2.d,
gas/tic6x/attr-arch-opts-override-1.d,
gas/tic6x/attr-arch-opts-override-2.d: Update for attribute
renaming and renumbering.

include/elf:
* tic6x-attrs.h (Tag_C6XABI_Tag_CPU_arch): Change to Tag_ISA,
value 4.
* tic6x.h (Values for Tag_C6XABI_Tag_CPU_arch): Rename for
attribute renaming.

ld:
* emulparams/elf32_tic6x_le.sh (ATTRS_SECTIONS): Use
.c6xabi.attributes, not __TI_build_attributes.

ld/testsuite:
* ld-tic6x/attr-arch-c62x-c62x.d, ld-tic6x/attr-arch-c62x-c64x+.d,
ld-tic6x/attr-arch-c62x-c64x.d, ld-tic6x/attr-arch-c62x-c674x.d,
ld-tic6x/attr-arch-c62x-c67x+.d, ld-tic6x/attr-arch-c62x-c67x.d,
ld-tic6x/attr-arch-c64x+-c62x.d, ld-tic6x/attr-arch-c64x+-c64x+.d,
ld-tic6x/attr-arch-c64x+-c64x.d, ld-tic6x/attr-arch-c64x+-c674x.d,
ld-tic6x/attr-arch-c64x+-c67x+.d, ld-tic6x/attr-arch-c64x+-c67x.d,
ld-tic6x/attr-arch-c64x-c62x.d, ld-tic6x/attr-arch-c64x-c64x+.d,
ld-tic6x/attr-arch-c64x-c64x.d, ld-tic6x/attr-arch-c64x-c674x.d,
ld-tic6x/attr-arch-c64x-c67x+.d, ld-tic6x/attr-arch-c64x-c67x.d,
ld-tic6x/attr-arch-c674x-c62x.d, ld-tic6x/attr-arch-c674x-c64x+.d,
ld-tic6x/attr-arch-c674x-c64x.d, ld-tic6x/attr-arch-c674x-c674x.d,
ld-tic6x/attr-arch-c674x-c67x+.d, ld-tic6x/attr-arch-c674x-c67x.d,
ld-tic6x/attr-arch-c67x+-c62x.d, ld-tic6x/attr-arch-c67x+-c64x+.d,
ld-tic6x/attr-arch-c67x+-c64x.d, ld-tic6x/attr-arch-c67x+-c674x.d,
ld-tic6x/attr-arch-c67x+-c67x+.d, ld-tic6x/attr-arch-c67x+-c67x.d,
ld-tic6x/attr-arch-c67x-c62x.d, ld-tic6x/attr-arch-c67x-c64x+.d,
ld-tic6x/attr-arch-c67x-c64x.d, ld-tic6x/attr-arch-c67x-c674x.d,
ld-tic6x/attr-arch-c67x-c67x+.d, ld-tic6x/attr-arch-c67x-c67x.d:
Update for attribute renaming.

* elf-bfd.h (struct elf_backend_data): New member
static_tls_alignment.
* elfxx-target.h (elf_backend_static_tls_alignment): Provide
default.
(elfNN_bed): Initialize static_tls_alignment.
* elflink.c (bfd_elf_final_link): Don't round end of TLS section
if static TLS has special alignment requirements.
* elf32-i386.c (elf_i386_tpoff): Define bed, static_tls_size.
Consider static_tls_alignment.
(elf_backend_static_tls_alignment): Redefine for Solaris 2.
Undef again for VxWorks.
* elf64-x86-64.c (elf64_x86_64_tpoff):  Define bed,
static_tls_size.
Consider static_tls_alignment.
(elf_backend_static_tls_alignment): Redefine for Solaris 2.
Undef again for Intel L1OM.

*** empty log message ***

2010-10-20  Michael Snyder  <msnyder@vmware.com>

* gdb.threads/fork-child-threads.exp: Don't run on remote target.

daily update

* gdbint.texinfo (Misc Guidelines): Renamed from Coding.
All references updated.  Correct sections marked as subsections.
(Coding Standards): New chapter.  Move the coding standard related
subsections here.  Add section on Python coding standards.

cvs add smartp.cc smartp.exp

Original changelog:
Support overloading of 'operator->'.
[...]
2010-10-19  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/smartp.exp: New test.
* gdb.cp/smartp.cc : New test.

* plugin.c (get_symbols): Check symbol type correctly.

* Makefile.def (target_modules): Set lib_path to src/.libs for
libstdc++-v3 module.
* Makefile.tpl: Fix typo in TARGET_LIB_PATH comment.
* Makefile.in: Rebuild.

2010-10-20  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relobj::do_read_symbols): Warn about ARM EXIDX sections
without SHF_LINK_ORDER flags.
* layout.cc (Layout::choose_output_section): Do not filter
SHF_LINK_ORDER flag in a relocatable link.

* ld-plugin/plugin.exp: Mark tests UNSUPPORTED, not UNRESOLVED, if
no suitable target compiler is available.

2010-10-20  Hui Zhu  <teawater@gmail.com>

* tracepoint.c (tfile_get_traceframe_address): Call
extract_signed_integer.
(tfile_trace_find): Call extract_signed_integer and
extract_unsigned_integer.  Change data_size to unsigned int.
(tfile_fetch_registers): Call extract_unsigned_integer.
(tfile_xfer_partial): Ditto.
(tfile_get_trace_state_variable_value): Call
extract_signed_integer and extract_unsigned_integer.

* remote.c (remote_get_threadlist): If we got empty
response, bail out immediately, and don't emit any
warnings.

*** empty log message ***

daily update

* arm-tdep.c (thumb_get_next_pc_raw): Handle Thumb-16 encoding
for "mov pc, REG" as well.
(thumb_instruction_changes_pc): Likewise.

* gdb.base/watch_thread_num.exp: Revert 2008-09-03 change.
Skip test completely if gdb,no_hardware_watchpoints.

* gdb.base/foll-fork.exp: Make regexps to match catchpoint hits more
strict, but do not check for any particular function name within libc.

Support overloading of 'operator->'.

2010-10-19  Sami Wagiaalla  <swagiaal@redhat.com>

 PR C++/11500:
* valarith.c (value_x_unop): Handle STRUCTOP_PTR.
* eval.c (evaluate_subexp_standard): Check for overload of
'operator->'.
* valarith.c (value_x_binop): Throw NOT_FOUND_ERROR.
(value_x_unop): Ditto.
* valops.c: Include "exceptions.h".
(find_overload_match): Throw NOT_FOUND_ERROR.
(value_struct_elt): Ditto.

2010-10-19  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/smartp.exp: New test.
* gdb.cp/smartp.cc : New test.

* python/py-cmd.c (cmdpy_function): Unreference exception state.

Add testcase for PR gas/12049.

2010-10-19  H.J. Lu  <hongjiu.lu@intel.com>

PR gas/12049
* gas/i386/i386.exp: Run relax-1 and relax-2.

* gas/i386/relax-1.d: New.
* gas/i386/relax-1.s: Likewise.
* gas/i386/relax-2.d: Likewise.
* gas/i386/relax-2.s: Likewise.

Support pointer to bool conversion.

2010-10-19  Sami Wagiaalla  <swagiaal@redhat.com>

* gdbtypes.h: Introduce BOOL_PTR_CONVERSION_BADNESS.
* gdbtypes.c (rank_one_type): Use BOOL_PTR_CONVERSION_BADNESS
for conversion.
Make all other conversions illegal.

2010-10-19  Sami Wagiaalla  <swagiaal@redhat.com>

* gdb.cp/converts.exp: Test pointer to bool conversion.
Test pointer to long conversion.
* gdb.cp/oranking.exp: Removed relevant kfail.

* write.c (relax_segment): Correct address on frag added to stop
leb128/align frags bouncing.

PR gas/12049
* frags.h (struct frag): Add "region" field.
* write.c (relax_frag): Don't add "stretch" to forward reference
target if there is an intervening org or align.
(relax_segment): Set region.

* c-typeprint.c (c_type_print_base, case TYPE_CODE_TYPEDEF): Verify
assumptions of when this case happens.  Print "<unnamed typedef>".

*** empty log message ***

daily update

gdb
* valprint.c (val_print_string): Pass 'encoding' to
LA_PRINT_STRING.
gdb/testsuite
* gdb.python/py-prettyprint.exp (run_lang_tests): Test encoding
argument to lazy_string.
* gdb.python/py-prettyprint.py (pp_ls_encoding): New global.
(pp_ls.to_string): Use it.
* gdb.python/py-prettyprint.c (main): Move declarations to top.
Add "estring2" local.

merge from gcc

2010-10-18  Kai Tietz  <kaI.tietz@onevision.com>

        * gas/i386/disp32.d: Adjust initial symbol check.
        * gas/i386/x86-64-disp32.d: Likewise.

* output.h (Output_segment::set_section_addresses): Change function
signature.  Update all callers.
* output.cc (Output_segment::is_first_section_relro): Ignore TLS
sections.
(Output_segment::set_section_addresses): Align after last TLS
section.  Add padding before last relro section instead of after.

* gas/mips/ld.d: Spell out section offsets and addends
explicitly.  Clean up some regexps.
* gas/mips/ld-ilocks.d: Likewise.  Add missing "$" prefixes to
the names of FP registers.
* gas/mips/ld-ilocks-addr32.d: Likewise.
* gas/mips/ld.s: Align sections to 4k, adjust padding.

* gas/mips/ld.d: Use wildcard address matching.
* gas/mips/ld-ilocks.d: Likewise.
* gas/mips/ld-ilocks-addr32.d: Likewise.

* gas/mips/mips.exp (run_dump_test_arch): Get the name of the
architecture to check against for an architecture-specific test
from the properties instead of the name passed.

* config/tc-mips.c (macro)[ldd_std]: Fix the relaxation variant
for absolute addressing.

opcodes/
* mips-opc.c (mips_builtin_opcodes): Move M_LD_OB and M_SD_OB
macros before their corresponding MIPS III hardware instructions.

gas/
* config/tc-mips.c (macro)[M_LD_OB, M_SD_OB]: Handle 64-bit ABIs.

gas/testsuite/
* gas/mips/lineno.s: Convert to o32.
* gas/mips/lineno.d: Adjust patterns accordingly.  Force the o32
ABI.

* config/tc-mips.c (mips_pseudo_table): Add "sbss".
(s_change_sec): Handle it.

*** empty log message ***

daily update

gdb/testsuite/
Fix s390x compatibility.
* gdb.dwarf2/pr11465.S (DW_TAG_pointer_type): Use PTRBITS.  Twice.
* gdb.dwarf2/pr11465.exp: Set ptrbits, use it for -DPTRBITS.

gdb/
Fix the `stopped language detection' testcase for gcc-4.5.
* dwarf2read.c (read_partial_die): Set also LANGUAGE_OF_MAIN.
* symfile.c (set_initial_language): Move variable filename to a more
inner block.  Prefer LANGUAGE_OF_MAIN.
* symtab.c (language_of_main): New variable.
(set_main_name): Always reset LANGUAGE_OF_MAIN.
* symtab.h (language_of_main): New declaration.

gdb/
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them.  Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP.  Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp.  Call currently_stepping_callback and step such
thread.

gdb/testsuite/
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.

gdb/
* infrun.c (follow_exec): Replace symbol_file_add_main by
symbol_file_add with SYMFILE_DEFER_BP_RESET, set_initial_language and
breakpoint_re_set.
* m32r-rom.c (m32r_load, m32r_upload_command): Use parameter 0 for
clear_symtab_users.
* objfiles.c (free_all_objfiles): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* solib-som.c (som_solib_create_inferior_hook): Likewise.
* symfile.c (new_symfile_objfile): New comment for add_flags.  Call
clear_symtab_users with ADD_FLAGS.
(reread_symbols): Use parameter 0 for clear_symtab_users.
(clear_symtab_users): New parameter add_flags.  Do not call
breakpoint_re_set if SYMFILE_DEFER_BP_RESET.
(clear_symtab_users_cleanup): Use parameter 0 for clear_symtab_users.
* symtab.h (clear_symtab_users): New parameter add_flags.

gdb/testsuite/
* gdb.base/pie-execl.exp: New file.
* gdb.base/pie-execl.c: New file.

2010-10-17  Doug Kwan  <dougkwan@google.com>

* gold/arm.cc (Target_arm::got_section): Use correct order and set
GOT output section to be writable.

gdb/
Fix GCC false warning.
* varobj.c (value_get_print_value) <str_addr>: Initialize it.

*** empty log message ***

daily update

Add CpuNop to CPU_GENERIC64_FLAGS.

gas/testsuite/

2010-10-16  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run x86-64-nops-1-g64.

* gas/i386/x86-64-nops-1.d: Remove -mtune=generic64.

* gas/i386/x86-64-nops-1-g64.d: New.

opcodes/

2010-10-16  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c (cpu_flag_init): Add CpuNop to CPU_GENERIC64_FLAGS.

* i386-init.h: Regenerated.

2010-10-16  Kai Tietz  <kai.tietz@onevision.com>

        * ld-pe/pe-run2.exp: Prefix --enable-auto-import by -Wl.

* layout.cc (Layout::set_segment_offsets): Don't try to realign data
segment that has been aligned for relro.
* output.cc (Output_segment::set_section_addresses): Change signature;
adjust all callers.  Account for alignment when totalling
size of relro sections.
* output.h (Output_segment::set_section_addresses): Change signature.
* testsuite/Makefile.am (relro_test.sh, relro_test.stdout): New
targets.
* testsuite/Makefile.in: Regenerate.
* testsuite/relro_test.cc: Add alignment attributes to test proper
alignment of relro sections when padding is necessary.
* testsuite/relro_test.sh: New script.

*** empty log message ***

* p-typeprint.c (pascal_type_print_method_args): Fix problem in
display of type of method arguments.

daily update

gas: blackfin: add tests for recent loop label fixes

Signed-off-by: David Gibson <david.gibson@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gas: blackfin: add illegal insn tests

Make sure all illegal insns get assembled & decoded correctly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gas: blackfin: fix encoding of BYTEOP2M insn

The BYTEOP2M parser incorrectly calls BYTEOP2P to generate the opcode.
Once we've fixed that, it's easy to see that the disassembler also likes
to decode this insn incorrectly.  So fix that and then add some tests.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gas: blackfin: generalize matching in the video tests

The exact symbol addresses are not important to these tests.  We only
care about the opcodes and the disassembly output.  This makes adding
more insns to these tests easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

PR python/11948:
* varobj.c (value_get_print_value): Use val_print_string to print
lazy strings.
* python/py-prettyprint.c (print_string_repr): Use
val_print_string to print lazy strings.  Fix cleanup logic.
(print_children): Likewise.
* python/python-internal.h (gdbpy_extract_lazy_string): Update.
* python/py-lazy-string.c (gdbpy_extract_lazy_string): Rewrite.
Change return type to 'void', add 'addr' argument.
* value.h (val_print_string): Update.
* valprint.c (val_print_string): Add 'encoding' argument.
* printcmd.c (print_formatted): Update.
* p-valprint.c (pascal_val_print): Update.
* m2-valprint.c (print_unpacked_pointer): Update.
(m2_print_array_contents): Likewise.
* jv-valprint.c (java_value_print): Update.
* f-valprint.c (f_val_print): Update.
* c-valprint.c (c_val_print): Update.
* auxv.c (fprint_target_auxv): Update.

gdb/
PR exp/12117
* gdbtypes.c (check_typedef): Clean up function comment.
Keep track of instance flags as we strip typedefs and create a new
type to preserve them if necessary.
* gdbtypes.h (type) <instance_flags>: Extend the comment.

gdb/testsuite/
PR exp/12117
* gdb.cp/ptype-cv-cp.cc: New file.
* gdb.cp/ptype-cv-cp.exp: New file.

Provide win32-based dlapi replacements on windows platforms without dlfcn.h.

ld/ChangeLog:

* configure.in: If <dlfcn.h> can't be found, try for <Windows.h>
* configure: Regenerate.
* config.in: Likewise.
* plugin.c [!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlopen): Provide
trival LoadLibrary-based replacement for Windows systems.
[!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlsym): Likewise trivial
replacement based on GetProcAddress.
[!HAVE_DLFCN_H && HAVE_WINDOWS_H] (dlsym): Likewise FreeLibrary.
* sysdep.h: Don't infer presence of <dlfcn.h> from ENABLE_PLUGINS
anymore, use its own guard.

Fix potential use-after-free bugs.

ld/ChangeLog:

* plugin.c (add_input_file): Take copy of input string.
(add_input_library): Likewise.
(set_extra_library_path): Likewise.

Avoid testsuite errors when no cross compiler is available.

ld/testsuite/ChangeLog:

* ld-plugin/plugin.exp: Don't error out if there is no target compiler
available, make tests UNSUPPORTED instead.

* p-lang.c (is_pascal_string_type): Use TYPE_FIELD_NAME accessor.

*** empty log message ***

Remove CheckRegSize from movq.

2010-10-14  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Remove CheckRegSize from movq.
* i386-tbl.h: Regenerated.

daily update

* debug.h (DEBUG_INCREMENTAL): New flag.
(debug_string_to_enum): Add DEBUG_INCREMENTAL).
* gold.cc (queue_initial_tasks): Check parameters for incremental link
mode.
* incremental.cc (report_command_line): Ignore all forms of
--incremental.
* layout.cc (Layout::Layout): Check parameters for incremental link
mode.
* options.cc (General_options::parse_incremental): New function.
(General_options::parse_no_incremental): New function.
(General_options::parse_incremental_full): New function.
(General_options::parse_incremental_update): New function.
(General_options::incremental_mode_): New data member.
(General_options::finalize): Check incremental_mode_.
* options.h (General_options): Update help text for --incremental.
Add --no-incremental, --incremental-full, --incremental-update.
(General_options::Incremental_mode): New enum type.
(General_options::incremental_mode): New function.
(General_options::incremental_mode_): New data member.
* parameters.cc (Parameters::incremental_mode_): New data member.
(Parameters::set_options): Set incremental_mode_.
(Parameters::set_incremental_full): New function.
(Parameters::incremental): New function.
(Parameters::incremental_update): New function.
(set_parameters_incremental_full): New function.
* parameters.h (Parameters::set_incremental_full): New function.
(Parameters::incremental): New function.
(Parameters::incremental_update): New function.
(Parameters::incremental_mode_): New data member.
(set_parameters_incremental_full): New function.
* plugin.cc (Plugin_manager::add_input_file): Check parameters for
incremental link mode.
* reloc.cc (Sized_relobj::do_read_relocs): Likewise.
(Sized_relobj::do_relocate_sections): Likewise.
* testsuite/Makefile.am (incremental_test): Use --incremental-full
option.
* testsuite/Makefile.in: Regenerate.
* testsuite/incremental_test.sh: Filter all forms of --incremental.

Remove CheckRegSize from instructions with 0, 1 or fixed operands.

2010-10-14  H.J. Lu  <hongjiu.lu@intel.com>

* i386-opc.tbl: Remove CheckRegSize from instructions with
0, 1 or fixed operands.
* i386-tbl.h: Regenerated.

Add CheckRegSize to instructions which require register size check.

gas/

2010-10-14  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (match_template): Check checkregsize
instead of w for register size check.

gas/testsuite/

2010-10-14  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run inval-reg.

* gas/i386/inval-reg.l: New.
* gas/i386/inval-reg.s: Likewise.

opcodes/

2010-10-14  H.J. Lu  <hongjiu.lu@intel.com>

* i386-gen.c (opcode_modifiers): Add CheckRegSize.

* i386-opc.h (CheckRegSize): New.
(i386_opcode_modifier): Add checkregsize.

* i386-opc.tbl: Add CheckRegSize to instructions which
require register size check.
* i386-tbl.h: Regenerated.