[PATCH] Fix building microblaze targets with trunk

[PATCH] Fix building microblaze targets with trunk
* config/microblaze/microblaze.c (microblaze_version_to_int): Remove
computation of unused value.

From-SVN: r228263

2015-09-29  Steven G. Kargl  <kargl@gcc.gnu.org>

gfortran.dg/ieee/ieee_4.f90: xfail on i386-*-freebsd*
gfortran.dg/round_4.f90: ditto.

From-SVN: r228262

[PATCH] Fix warnings building pdp11 port

* config/pdp11/pdp11.c (pdp11_branch_cost): New function.
* config/pdp11/pdp11.h (BRANCH_COST): Call function rather than
inline macro expansion.

From-SVN: r228259

[PATCH] Fix building interix targets

* config/i386/t-interix (winnt-stubs.o): Fix compilation rule.

From-SVN: r228258

[PATCH] Fix undefined behaviour in SH port

* config/sh/sh.c (gen_shl_and): Fix undefined left shift
behaviour.
(gen_shl_sext): Likewise.
* config/sh/sh.md (divsi3): Likewise.
(imm->ext_dest_operand splitter): Likewise.

From-SVN: r228257

remove dead code of commutative_reductions

This code is not used anymore after we removed the previous loop optimizer (not
based on the ISL scheduler.)  We will add back the detection of commutative
reductions after we improve the code generation of scalar dependences (by not
going out of SSA for scalar dependences just to expose them to the data
dependence graph.)

Patch passed bootstrap and check on x86_64-linux with ISL-0.15.

2015-09-29  Sebastian Pop  <s.pop@samsung.com>
            Aditya Kumar  <aditya.k7@samsung.com>

            * graphite-sese-to-poly.c (gsi_for_phi_node): Remove.
            (nb_data_writes_in_bb): Remove.
            (split_pbb): Remove.
            (split_reduction_stmt): Remove.
            (is_reduction_operation_p): Remove.
            (phi_contains_arg): Remove.
            (follow_ssa_with_commutative_ops): Remove.
            (detect_commutative_reduction_arg): Remove.
            (detect_commutative_reduction_assign): Remove.
            (follow_inital_value_to_phi): Remove.
            (edge_initial_value_for_loop_phi): Remove.
            (initial_value_for_loop_phi): Remove.
            (used_outside_reduction): Remove.
            (detect_commutative_reduction): Remove.
            (translate_scalar_reduction_to_array_for_stmt): Remove.
            (remove_phi): Remove.
            (dr_indices_valid_in_loop): Remove.
            (close_phi_written_to_memory): Remove.
            (translate_scalar_reduction_to_array): Remove.
            (rewrite_commutative_reductions_out_of_ssa_close_phi): Remove.
            (rewrite_commutative_reductions_out_of_ssa_loop): Remove.
            (rewrite_commutative_reductions_out_of_ssa): Remove.
            (build_poly_scop): Remove call to rewrite_commutative_reductions_out_of_ssa.

Co-Authored-By: Aditya Kumar <aditya.k7@samsung.com>
From-SVN: r228255

[PATCH] Fix undefined behaviour in rx port

[PATCH] Fix undefined behaviour in rx port
        * config/rx/constraints.md (Int08): Fix undefined left shift
        behaviour.
        (Sint08, Sint16, Sint24): Likewise.
        * config/rx/rx.c (rx_get_stack_layout): Likewise.

From-SVN: r228254

add separate insn sched class for vector LDP & STP

2015-09-29  Evandro Menezes  <e.menezes@samsung.com>

* config/arm/types.md (neon_ldp, neon_ldp_q, neon_stp, neon_stp_q):
Add new insn types for vector load and store pairs.
* config/arm/cortex-a53.md (cortex_a53_f_load_2reg): Add insn
types "neon_ldp{,_q}".
* config/arm/cortex-a57.md (neon_load_c): Add insn types
"neon_ldp{,_q}".
(neon_store_complex): Add insn types "neon_stp{,_q}".
* config/aarch64/aarch64-simd.md (aarch64_be_movoi): Add insn types
"neon_{ldp,stp}_q".

From-SVN: r228253

[PATCH] Fix undefined behaviour in rl78 port

[PATCH] Fix undefined behaviour in rl78 port
        * config/rl78/rl78-expand.md (movqi): Fix undefined left shift
        behaviour.

From-SVN: r228252

[PATCH] Fix undefined behaviour in msp430 port

       * config/msp430/msp430.c (msp430_legitimate_constant): Fix undefined
        left shift behaviour.
        * config/msp430/constraints.md ('L' constraint): Similarly.
        ('Ys' constraint): Similarly.

From-SVN: r228251

Leave errno unchanged by successful std::stoi etc

* include/ext/string_conversions.h (__stoa): Save and restore errno.
* testsuite/21_strings/basic_string/numeric_conversions/char/errno.cc:
New.

From-SVN: r228249

libgomp-plugin-intelmic.cpp (OFFLOAD_ACTIVE_WAIT_ENV): New define.

liboffloadmic/
* plugin/libgomp-plugin-intelmic.cpp (OFFLOAD_ACTIVE_WAIT_ENV): New
define.
(init): Set OFFLOAD_ACTIVE_WAIT env var to 0, if it is not set.
* runtime/emulator/coi_common.h (PIPE_HOST_PATH): Replace with ...
(PIPE_HOST2TGT_NAME): ... this.
(PIPE_TARGET_PATH): Replace with ...
(PIPE_TGT2HOST_NAME): ... this.
(MALLOCN): New define.
(READN): Likewise.
(WRITEN): Likewise.
(enum cmd_t): Replace CMD_RUN_FUNCTION with CMD_PIPELINE_RUN_FUNCTION.
Add CMD_PIPELINE_CREATE, CMD_PIPELINE_DESTROY.
* runtime/emulator/coi_device.cpp (engine_dir): New static variable.
(pipeline_thread_routine): New static function.
(COIProcessWaitForShutdown): Use global engine_dir instead of mic_dir.
Rename pipe_host and pipe_target to pipe_host2tgt and pipe_tgt2host.
If cmd is CMD_PIPELINE_CREATE, create a new thread for the pipeline.
Remove cmd == CMD_RUN_FUNCTION case.
* runtime/emulator/coi_device.h (COIERRORN): New define.
* runtime/emulator/coi_host.cpp: Include set, map, queue.
Replace typedefs with enums and structs.
(struct Function): Remove name, add num_buffers, bufs_size,
bufs_data_target, misc_data_len, misc_data, return_value_len,
return_value, completion_event.
(struct Callback): New.
(struct Process): Remove pipeline.  Add pipe_host2tgt and pipe_tgt2host.
(struct Pipeline): Remove pipe_host and pipe_target.  Add thread,
destroy, is_destroyed, pipe_host2tgt_path, pipe_tgt2host_path,
pipe_host2tgt, pipe_tgt2host, queue, process.
(max_pipeline_num): New static variable.
(pipelines): Likewise.
(max_event_num): Likewise.
(non_signalled_events): Likewise.
(errored_events): Likewise.
(callbacks): Likewise.
(cleanup): Do not check tmp_dirs before free.
(start_critical_section): New static function.
(finish_critical_section): Likewise.
(pipeline_is_destroyed): Likewise.
(maybe_invoke_callback): Likewise.
(signal_event): Likewise.
(get_event_result): Likewise.
(COIBufferCopy): Rename arguments according to headers.  Add asserts.
Use process' main pipes, instead of pipeline's pipes.  Signal completion
event.
(COIBufferCreate): Rename arguments according to headers.  Add asserts.
Use process' main pipes, instead of pipeline's pipes.
(COIBufferCreateFromMemory): Rename arguments according to headers.
Add asserts.
(COIBufferDestroy): Rename arguments according to headers.  Add asserts.
Use process' main pipes, instead of pipeline's pipes.
(COIBufferGetSinkAddress): Rename arguments according to headers.
Add asserts.
(COIBufferMap): Rename arguments according to headers.  Add asserts.
Signal completion event.
(COIBufferRead): Likewise.
(COIBufferSetState): Likewise.
(COIBufferUnmap): Likewise.
(COIBufferWrite): Likewise.
(COIEngineGetCount): Add assert.
(COIEngineGetHandle): Rename arguments according to headers.
Add assert.
(COIEventWait): Rename arguments according to headers.  Add asserts.
Implement waiting for events with zero or infinite timeout.
(COIEventRegisterCallback): New function.
(pipeline_thread_routine): New static function.
(COIPipelineCreate): Create a new thread for the pipeline.
(COIPipelineDestroy): Exit pipeline thread.
(COIPipelineRunFunction): Add the function into pipeline's queue,
instead running it here.  Wait for it's completion in case of
synchronous execution.
(COIProcessCreateFromMemory): Rename arguments according to headers.
Add asserts.  Create process' main pipes, instead of pipeline's pipes.
(COIProcessDestroy): Rename arguments according to headers.
Add asserts.  Destroy all undestroyed pipelines.
(COIProcessGetFunctionHandles): Rename arguments according to headers.
Add asserts.  Use process' main pipes, instead of pipeline's pipes.
Remove useless function names.
(COIProcessLoadLibraryFromMemory): Add asserts.  Use process' main
pipes, instead of pipeline's pipes.
(COIProcessUnloadLibrary): Likewise.
(COIEngineGetInfo): Add assert.
* runtime/emulator/coi_host.h (COIERRORN): New define.

From-SVN: r228248

PR libstdc++/67583 Fix invalid sputn calls in tests

PR libstdc++/67583
* testsuite/27_io/basic_stringbuf/seekoff/char/1.cc: Fix sputn call
with mismatched arguments.
* testsuite/27_io/basic_stringbuf/seekoff/wchar_t/1.cc: Likewise.

From-SVN: r228245

re PR fortran/67170 (PRE can't hoist out a readonly argument)

2015-09-29  Richard Biener  <rguenther@suse.de>

PR tree-optimization/67170
* tree-ssa-alias.h (get_continuation_for_phi): Adjust
the translate function pointer parameter to get the
bool whether to disambiguate only by reference.
(walk_non_aliased_vuses): Likewise.
* tree-ssa-alias.c (maybe_skip_until): Adjust.
(get_continuation_for_phi_1): Likewise.
(get_continuation_for_phi): Likewise.
(walk_non_aliased_vuses): Likewise.
* tree-ssa-sccvn.c (const_parms): New bitmap.
(vn_reference_lookup_3): Adjust for interface change.
Disambiguate parameters pointing to readonly memory.
(free_scc_vn): Free const_parms.
(run_scc_vn): Initialize const_parms from a fn spec attribute.

* gfortran.dg/pr67170.f90: New testcase.

From-SVN: r228244

re PR tree-optimization/67741 (Invalid built-in usage should not cause segmentation fault in compiler)

2015-09-29  Richard Biener  <rguenther@suse.de>

PR tree-optimization/67741
* tree-ssa-math-opts.c (pass_cse_sincos::execute): Only recognize
builtin calls with correct signature.

* gcc.dg/torture/pr67741.c: New testcase.

From-SVN: r228243

Reduce space and time overhead of std::thread

PR libstdc++/65393
* config/abi/pre/gnu.ver: Export new symbols.
* include/std/thread (thread::_State, thread::_State_impl): New types.
(thread::_M_start_thread): Add overload taking unique_ptr<_State>.
(thread::_M_make_routine): Remove.
(thread::_S_make_state): Add.
(thread::_Impl_base, thread::_Impl, thread::_M_start_thread)
[_GLIBCXX_THREAD_ABI_COMPAT] Only declare conditionally.
* src/c++11/thread.cc (execute_native_thread_routine): Rename to
execute_native_thread_routine_compat and re-define to use _State.
(thread::_State::~_State()): Define.
(thread::_M_make_thread): Define new overload.
(thread::_M_make_thread) [_GLIBCXX_THREAD_ABI_COMPAT]: Only define old
overloads conditionally.

From-SVN: r228242

tg-tests.h (foo_1): Also check if f and ld are non-zero for __builtin_signbit tests.

* gcc.dg/tg-tests.h (foo_1) [UNSAFE]: Also check if f and ld are
non-zero for __builtin_signbit tests.

From-SVN: r228240

re PR target/65105 ([i386] XMM registers are not used for 64bit computations on 32bit target)

gcc/

PR target/65105
* config/i386/i386.c: Include dbgcnt.h.
(has_non_address_hard_reg): New.
(convertible_comparison_p): New.
(scalar_to_vector_candidate_p): New.
(remove_non_convertible_regs): New.
(scalar_chain): New.
(scalar_chain::scalar_chain): New.
(scalar_chain::~scalar_chain): New.
(scalar_chain::add_to_queue): New.
(scalar_chain::mark_dual_mode_def): New.
(scalar_chain::analyze_register_chain): New.
(scalar_chain::add_insn): New.
(scalar_chain::build): New.
(scalar_chain::compute_convert_gain): New.
(scalar_chain::replace_with_subreg): New.
(scalar_chain::replace_with_subreg_in_insn): New.
(scalar_chain::emit_conversion_insns): New.
(scalar_chain::make_vector_copies): New.
(scalar_chain::convert_reg): New.
(scalar_chain::convert_op): New.
(scalar_chain::convert_insn): New.
(scalar_chain::convert): New.
(convert_scalars_to_vector): New.
(pass_data_stv): New.
(pass_stv): New.
(make_pass_stv): New.
(ix86_option_override): Created and register stv pass.
(flag_opts): Add -mstv.
(ix86_option_override_internal): Likewise.
* config/i386/i386.md (SWIM1248x): New.
(*movdi_internal): Add xmm to mem alternative for TARGET_STV.
(and<mode>3): Use SWIM1248x iterator instead of SWIM.
(*anddi3_doubleword): New.
(*zext<mode>_doubleword): New.
(*zextsi_doubleword): New.
(<code><mode>3): Use SWIM1248x iterator instead of SWIM.
(*<code>di3_doubleword): New.
* config/i386/i386.opt (mstv): New.
* dbgcnt.def (stv_conversion): New.

gcc/testsuite/

PR target/65105
* gcc.target/i386/pr65105-1.c: New.
* gcc.target/i386/pr65105-2.c: New.
* gcc.target/i386/pr65105-3.c: New.
* gcc.target/i386/pr65105-4.C: New.
* gcc.dg/lower-subreg-1.c: Add -mno-stv options for ia32.

From-SVN: r228231

Dump function attributes

2015-09-29  Tom de Vries  <tom@codesourcery.com>

* tree-cfg.c (dump_function_to_file): Dump function attributes.

From-SVN: r228229

re PR target/67716 ([5] [SH]: Miscompiles libraw: Assembler: unaligned opcodes detected in executable segment)

PR target/67716
* [SH] Implement targetm.override_options_after_change hook
  so to avoid resetting loop, jump and function alignment values with
  function-wise optimization flags.

From-SVN: r228228

Fix gcc.dg/asm-4.c

Double-quoted words in Tcl have substitutions performed on them, including
backslash substitutions.  That isn't terribly nice for regular expressions,
so use braced words instead.

2015-09-28  Segher Boessenkool  <segher@kernel.crashing.org>

gcc/testsuite/
* gcc.dg/asm-4.c: Use braced words for the regular expressions.

From-SVN: r228227

Daily bump.

From-SVN: r228226

Update soft-fp from glibc.

This patch updates the soft-fp code in libgcc from glibc.  There are
no changes here of significance to the use of soft-fp in GCC (and so
no testsuite additions); it's simply an update to bring in the latest
soft-fp version (which will also hopefully go into Linux 4.4 to
replace the 15-year-old copy currently in Linux).

Bootstrapped with no regressions on x86_64-pc-linux-gnu.

* soft-fp/adddf3.c: Update from glibc.
* soft-fp/addsf3.c: Likewise.
* soft-fp/addtf3.c: Likewise.
* soft-fp/divdf3.c: Likewise.
* soft-fp/divsf3.c: Likewise.
* soft-fp/divtf3.c: Likewise.
* soft-fp/double.h: Likewise.
* soft-fp/eqdf2.c: Likewise.
* soft-fp/eqsf2.c: Likewise.
* soft-fp/eqtf2.c: Likewise.
* soft-fp/extenddftf2.c: Likewise.
* soft-fp/extended.h: Likewise.
* soft-fp/extendsfdf2.c: Likewise.
* soft-fp/extendsftf2.c: Likewise.
* soft-fp/extendxftf2.c: Likewise.
* soft-fp/fixdfdi.c: Likewise.
* soft-fp/fixdfsi.c: Likewise.
* soft-fp/fixdfti.c: Likewise.
* soft-fp/fixsfdi.c: Likewise.
* soft-fp/fixsfsi.c: Likewise.
* soft-fp/fixsfti.c: Likewise.
* soft-fp/fixtfdi.c: Likewise.
* soft-fp/fixtfsi.c: Likewise.
* soft-fp/fixtfti.c: Likewise.
* soft-fp/fixunsdfdi.c: Likewise.
* soft-fp/fixunsdfsi.c: Likewise.
* soft-fp/fixunsdfti.c: Likewise.
* soft-fp/fixunssfdi.c: Likewise.
* soft-fp/fixunssfsi.c: Likewise.
* soft-fp/fixunssfti.c: Likewise.
* soft-fp/fixunstfdi.c: Likewise.
* soft-fp/fixunstfsi.c: Likewise.
* soft-fp/fixunstfti.c: Likewise.
* soft-fp/floatdidf.c: Likewise.
* soft-fp/floatdisf.c: Likewise.
* soft-fp/floatditf.c: Likewise.
* soft-fp/floatsidf.c: Likewise.
* soft-fp/floatsisf.c: Likewise.
* soft-fp/floatsitf.c: Likewise.
* soft-fp/floattidf.c: Likewise.
* soft-fp/floattisf.c: Likewise.
* soft-fp/floattitf.c: Likewise.
* soft-fp/floatundidf.c: Likewise.
* soft-fp/floatundisf.c: Likewise.
* soft-fp/floatunditf.c: Likewise.
* soft-fp/floatunsidf.c: Likewise.
* soft-fp/floatunsisf.c: Likewise.
* soft-fp/floatunsitf.c: Likewise.
* soft-fp/floatuntidf.c: Likewise.
* soft-fp/floatuntisf.c: Likewise.
* soft-fp/floatuntitf.c: Likewise.
* soft-fp/gedf2.c: Likewise.
* soft-fp/gesf2.c: Likewise.
* soft-fp/getf2.c: Likewise.
* soft-fp/ledf2.c: Likewise.
* soft-fp/lesf2.c: Likewise.
* soft-fp/letf2.c: Likewise.
* soft-fp/muldf3.c: Likewise.
* soft-fp/mulsf3.c: Likewise.
* soft-fp/multf3.c: Likewise.
* soft-fp/negdf2.c: Likewise.
* soft-fp/negsf2.c: Likewise.
* soft-fp/negtf2.c: Likewise.
* soft-fp/op-1.h: Likewise.
* soft-fp/op-2.h: Likewise.
* soft-fp/op-4.h: Likewise.
* soft-fp/op-8.h: Likewise.
* soft-fp/op-common.h: Likewise.
* soft-fp/quad.h: Likewise.
* soft-fp/single.h: Likewise.
* soft-fp/soft-fp.h: Likewise.
* soft-fp/subdf3.c: Likewise.
* soft-fp/subsf3.c: Likewise.
* soft-fp/subtf3.c: Likewise.
* soft-fp/truncdfsf2.c: Likewise.
* soft-fp/trunctfdf2.c: Likewise.
* soft-fp/trunctfsf2.c: Likewise.
* soft-fp/trunctfxf2.c: Likewise.
* soft-fp/unorddf2.c: Likewise.
* soft-fp/unordsf2.c: Likewise.
* soft-fp/unordtf2.c: Likewise.

From-SVN: r228223

[multiple changes]

2015-09-28  Paul Thomas  <pault@gcc.gnu.org>

PR fortran/40054
PR fortran/63921
* decl.c (get_proc_name): Return if statement function is
found.
* expr.c (gfc_check_vardef_context): Add error return for
derived type expression lacking the derived type itself.
* match.c (gfc_match_ptr_fcn_assign): New function.
* match.h : Add prototype for gfc_match_ptr_fcn_assign.
* parse.c : Add static flag 'in_specification_block'.
(decode_statement): If in specification block match a statement
function, then, if no error arising from statement function
matching, try to match pointer function assignment.
(parse_interface): Set 'in_specification_block' on exiting from
parse_spec.
(parse_spec): Set and then reset 'in_specification_block'.
(gfc_parse_file): Set 'in_specification_block'.
* resolve.c (get_temp_from_expr): Extend to include functions
and array constructors as rvalues..
(resolve_ptr_fcn_assign): New function.
(gfc_resolve_code): Call it on finding a pointer function as an
lvalue. If valid or on error, go back to start of resolve_code.
* symbol.c (gfc_add_procedure): Add a sentence to the error to
flag up the ambiguity between a statement function and pointer
function assignment at the end of the specification block.

2015-09-28  Paul Thomas  <pault@gcc.gnu.org>

PR fortran/40054
PR fortran/63921
* gfortran.dg/fmt_tab_1.f90: Change from run to compile and set
standard as legacy.
* gfortran.dg/fmt_tab_2.f90: Add extra tab error.
* gfortran.dg/function_types_3.f90: Change error message to
"Type inaccessible...."
* gfortran.dg/ptr_func_assign_1.f08: New test.
* gfortran.dg/ptr_func_assign_2.f08: New test.

2015-09-25  Mikael Morin  <mikael.morin@sfr.fr>

PR fortran/40054
PR fortran/63921
* gfortran.dg/ptr_func_assign_3.f08: New test.
* gfortran.dg/ptr_func_assign_4.f08: New test.

From-SVN: r228222

gomp-constants.h (GOMP_VERSION_NVIDIA_PTX): Increment.

inlude/
* gomp-constants.h (GOMP_VERSION_NVIDIA_PTX): Increment.
(GOMP_DIM_GANG, GOMP_DIM_WORKER, GOMP_DIM_VECTOR, GOMP_DIM_MAX,
GOMP_DIM_MASK): New.
(GOMP_LAUNCH_DIM, GOMP_LAUNCH_ASYNC, GOMP_LAUNCH_WAIT): New.
(GOMP_LAUNCH_CODE_SHIFT, GOMP_LAUNCH_DEVICE_SHIFT,
GOMP_LAUNCH_OP_SHIFT): New.
(GOMP_LAUNCH_PACK, GOMP_LAUNCH_CODE, GOMP_LAUNCH_DEVICE,
GOMP_LAUNCH_OP): New.
(GOMP_LAUNCH_OP_MAX): New.

libgomp/
* libgomp.h (acc_dispatch_t): Replace separate geometry args with
array.
* libgomp.map (GOACC_parallel_keyed): New.
* oacc-parallel.c (goacc_wait): Take pointer to va_list.  Adjust
all callers.
(GOACC_parallel_keyed): New interface.  Lose geometry arguments
and take keyed varargs list.  Adjust call to exec_func.
(GOACC_parallel): Force host fallback.
* libgomp_g.h (GOACC_parallel): Remove.
(GOACC_parallel_keyed): Declare.
* plugin/plugin-nvptx.c (struct targ_fn_launch): New struct.
(stuct targ_gn_descriptor): Replace name field with launch field.
(nvptx_exec): Lose separate geometry args, take array.  Process
dynamic dimensions and adjust.
(struct nvptx_tdata): Replace fn_names field with fn_descs.
(GOMP_OFFLOAD_load_image): Adjust for change in function table
data.
(GOMP_OFFLOAD_openacc_parallel): Adjust for change in dimension
passing.
* oacc-host.c (host_openacc_exec): Adjust for change in dimension
passing.

gcc/
* config/nvptx/nvptx.c: Include omp-low.h and gomp-constants.h.
(nvptx_record_offload_symbol): Record function execution geometry.
* config/nvptx/mkoffload.c (process): Include launch geometry in
function data.
* omp-low.c (oacc_launch_pack): New.
(replace_oacc_fn_attrib): New.
(set_oacc_fn_attrib): New.
(get_oacc_fn_attrib): New.
(expand_omp_target): Create keyed varargs for GOACC_parallel call
generation.
* omp-low.h (get_oacc_fn_attrib): Declare.
* builtin-types.def (DEF_FUNCTION_TyPE_VAR_6): New.
(DEF_FUNCTION_TYPE_VAR_11): Delete.
* tree.h (OMP_CLAUSE_EXPR): New.
* omp-builtins.def (BUILT_IN_GOACC_PARALLEL): Change target fn name.

gcc/lto/
* lto-lang.c (DEF_FUNCTION_TYPE_VAR_6): New.
(DEF_FUNCTION_TYPE_VAR_11): Delete.

gcc/c-family/
* c-common.c (DEF_FUNCTION_TYPE_VAR_6): New.
(DEF_FUNCTION_TYPE_VAR_11): Delete.

gcc/fortran/
* f95-lang.c (DEF_FUNCTION_TYPE_VAR_6): New.
(DEF_FUNCTION_TYPE_VAR_11): Delete.
* types.def (DEF_FUNCTION_TYPE_VAR_6): New.
(DEF_FUNCTION_TYPE_VAR_11): Delete.

gcc/ada/
* gcc-interface/utils.c (DEF_FUNCTION_TYPE_VAR_6): Define

From-SVN: r228220

Re: [PATCH] Fix undefined behaviour in arc port

Re: [PATCH] Fix undefined behaviour in arc port
        * config/arc/arc.c (arc_legitimize_reload_address): Fix stupid
        thinko in last change.
        * config/arc/constraints.md (C2a): Fix typos in last change.

From-SVN: r228219

fix bootstrap due to unused variable warning

  * sese.c (invariant_in_sese_p_rec): Remove unused variable.

Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r228218

LWG 2135: terminate() in condition_variable::wait()

* include/std/condition_variable (condition_variable::wait): Add
noexcept.
* src/c++11/condition_variable.cc (condition_variable::wait): Call
std::terminate on error (DR 2135).

From-SVN: r228217

Redesign Graphite scop detection

Redesign Graphite scop detection for faster compiler time and detecting more SCoPs.

Existing algorithm for SCoP detection in graphite was based on dominator tree
where a tree (CFG) traversal was required for analyzing an SESE. The tree
traversal is linear in the number of basic blocks and SCoP detection is
(probably) linear in number of instructions. That algorithm utilized a generic
infrastructure of SESE which does not directly represent loops.  With regards to
graphite framework, we are only interested in subtrees with loops. The new
algorithm is geared towards tree traversal on loop structure. The algorithm is
linear in number of loops which is faster than the previous algorithm.

Briefly, we start the traversal at a loop-nest and analyze it recursively for
validity. Once a valid loop is found we find a valid adjacent loop. If an
adjacent loop is found and is valid, we merge both loop nests otherwise we form
a SCoP from the previous loop nest, and resume the algorithm from the adjacent
loop nest. The data structure to represent an SESE is an ordered pair of edges
(entry, exit). The new algoritm can extend a SCoP in both the directions. With
this approach, the number of instructions to be analyzed for validity reduces to
a minimal set.  We start by analyzing those statements which are inside a loop,
because validity of those statements is necessary for the validity of loop. The
statements outside the loop nest can be just excluded from the SESE if they are
not valid.

This patch depends on: https://gcc.gnu.org/ml/gcc-patches/2015-09/msg02024.html

Passes (c,c++,fortran) regtest and bootstrap.

gcc/ChangeLog:

2015-09-27  Aditya Kumar  <hiraditya@msn.com>
            Sebastian Pop  <s.pop@samsung.com>
        * graphite-optimize-isl.c (optimize_isl):
        * graphite-scop-detection.c (struct sese_l): New type.
        (get_entry_bb): API for getting entry bb of SESE.
        (get_exit_bb): API for getting exit bb of SESE.
        (class debug_printer): New type. Simple printer in debug mode.
        (trivially_empty_bb_p): New. Return true when BB is empty or
contains only debug instructions.
        (graphite_can_represent_expr): Call scalar_evoution_in_region
instead of analyze_scalar_evolution. Pass in scop instead of only
the scop entry.
        (stmt_has_simple_data_refs_p): Pass in scop instead of only the
scop entry.
        (stmt_simple_for_scop_p): Same.
        (harmful_stmt_in_bb): Same.
        (graphite_can_represent_loop): Deleted.
        (struct scopdet_info): Deleted.
        (scopdet_basic_block_info): Deleted.
        (build_scops_1): Deleted.
        (bb_in_sd_region): Deleted.
        (find_single_entry_edge): Deleted.
        (find_single_exit_edge): Deleted.
        (create_single_entry_edge): Deleted.
        (sd_region_without_exit): Deleted.
        (create_single_exit_edge): Deleted.
        (unmark_exit_edges): Deleted.
        (mark_exit_edges): Deleted.
        (create_sese_edges): Deleted.
        (build_graphite_scops): Deleted.
        (canonicalize_loop_closed_ssa): Recompute all dominators at the
end.
        (build_scops): Use the new scop_builder to build scops.
        (dot_all_scops_1): Use the new pretty printer. Print loop father
as well.
        (loop_body_is_valid_scop): New. Return true if loop body is a
valid scop.
        (class scop_builder): New. Builds SCoPs for polyhedral
optimizatios.
        (scop_builder): New. Constructor.
        (static sese_l invalid_sese): sese_l with invalid edges.
        (get_sese): Get an sese (from a loop) if possible, invalid_sese
otherwise.
        (get_nearest_dom_with_single_entry): Get nearest dominator of a
basic_block with single entry. Return NULL if we get to the
beginning of a function.
        (get_nearest_pdom_with_single_exit): Get nearest post-dominator of
a basic_block with single exit. Return NULL if we get to the
beginning of a function.
        (print_sese): Pretty-print SESE.
        (merge_sese): Merge two SESEs if possible and return the new SESE.
        (build_scop_depth): Start building the SCoP within a loop nest.
        (build_scop_breadth): Start building the SCoP at a single loop
depth. Merge adjacent SESEs if valid.
        (can_represent_loop_1): Returns true if Graphite can represent
loop inside SCoP. Helper for can_represent_loop.
        (can_represent_loop): Returns true if Graphite can represent LOOP
and all its nested loops in SCoP.
        (loop_is_valid_scop): Returns true if LOOP and all its nests
constitute a valid SCoP.
        (region_has_one_loop): Returns true of a region has only one loop.
        (add_scop): Add SCoP to the list of valid scops. Removes an
already existing scop if it intersects with or subsumed by this
one.
        (harmful_stmt_in_region): Returns true if SCoP has any statment
which cannot be represented by Graphite.
        (subsumes): Returns true of SCoP S1 subsumes SCoP S2.
        (remove_subscops): Remove any SCoP from the list of already found
SCoPs, if subsumed by S1.
        (intersects): Return true if region bounded by SCoPs S1 and S2
intersect.
        (remove_intersecting_scops): Remove any SCoP which intersects with
S1.
        * graphite.c (print_graphite_scop_statistics):
        (print_graphite_statistics): Print SCoP info while debugging.
        (graphite_initialize): Early exit in case number of loops in a
function is less than PARAM_GRAPHITE_MIN_LOOPS_PER_FUNCTION or
basic blocks are more than PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION.
        (graphite_finalize):
        * params.def: Add PARAM_GRAPHITE_MIN_LOOPS_PER_FUNCTION.
        * sese.h (sese_loop_depth): Remove unnecessary gcc_assert.
        (recompute_all_dominators): Recalculate POST_DOMINATORS.
        * tree-cfg.c (print_loops): Print the function name while printing
loops.

gcc/testsuite/ChangeLog:

2015-09-27  Aditya Kumar  <hiraditya@msn.com>
            Sebastian Pop  <s.pop@samsung.com>
        * gcc.dg/graphite/block-1.c: Modified to match the pattern.
        * gcc.dg/graphite/block-3.c: Same.
        * gcc.dg/graphite/block-4.c: Same.
        * gcc.dg/graphite/block-5.c: Same.
        * gcc.dg/graphite/block-6.c: Same.
        * gcc.dg/graphite/block-7.c: Same.
        * gcc.dg/graphite/block-8.c: Same.
        * gcc.dg/graphite/block-pr47654.c: Same.
        * gcc.dg/graphite/interchange-0.c: Same.
        * gcc.dg/graphite/interchange-1.c: Same.
        * gcc.dg/graphite/interchange-10.c: Same.
        * gcc.dg/graphite/interchange-11.c: Same.
        * gcc.dg/graphite/interchange-12.c: Same.
        * gcc.dg/graphite/interchange-13.c: Same.
        * gcc.dg/graphite/interchange-14.c: Same.
        * gcc.dg/graphite/interchange-15.c: Same.
        * gcc.dg/graphite/interchange-3.c: Same.
        * gcc.dg/graphite/interchange-4.c: Same.
        * gcc.dg/graphite/interchange-5.c: Same.
        * gcc.dg/graphite/interchange-6.c: Same.
        * gcc.dg/graphite/interchange-7.c: Same.
        * gcc.dg/graphite/interchange-8.c: Same.
        * gcc.dg/graphite/interchange-9.c: Same.
        * gcc.dg/graphite/interchange-mvt.c: Same.
        * gcc.dg/graphite/pr35356-1.c (foo): Same.
        * gcc.dg/graphite/pr35356-3.c: Same.
        * gcc.dg/graphite/pr37485.c: Same.
        * gcc/testsuite/gcc.dg/graphite/run-id-pr67700-1.c: New test case.
        * gcc.dg/graphite/scop-1.c (int toto): Modified to match the pattern.
        * gcc.dg/graphite/scop-11.c: Same.
        * gcc.dg/graphite/scop-5.c: Same.
        * gcc.dg/graphite/uns-block-1.c: Same.
        * gcc.dg/graphite/uns-interchange-9.c: Same.
        * gfortran.dg/graphite/block-1.f90: Same.
        * gfortran.dg/graphite/interchange-3.f90: Same.
        * gfortran.dg/graphite/pr14741.f90: Same.

From-SVN: r228215

re PR tree-optimization/67700 ([graphite] miscompile due to wrong codegen)

fix PR67700

The patch makes the detection of scop parameters in parameter_index_in_region a
bit more conservative by discarding scalar variables defined in function of data
references defined in the scop.

2015-09-25  Aditya Kumar  <aditya.k7@samsung.com>
                Sebastian Pop  <s.pop@samsung.com>

                PR tree-optimization/67700
                * graphite-sese-to-poly.c (parameter_index_in_region): Call
                invariant_in_sese_p_rec.
                (extract_affine): Same.
                (rewrite_cross_bb_scalar_deps): Call update_ssa.
                * sese.c (invariant_in_sese_p_rec): Export.  Handle vdefs and vuses.
                * sese.h (invariant_in_sese_p_rec): Declare.

                * testsuite/gcc.dg/graphite/run-id-pr67700.c: New.

Co-Authored-By: Sebastian Pop <s.pop@samsung.com>
From-SVN: r228214

extend.texi (Asm Labels): Break out text for data vs functions.

2015-09-28  David Wohlferd  <dw@LimeGreenSocks.com>

         * doc/extend.texi (Asm Labels): Break out text for data vs
 functions.

From-SVN: r228212

[AArch64] Revert "Improve TLS Descriptor pattern to release RTL loop IV opt"

2015-09-28  Jiong Wang  <jiong.wang@arm.com>

Revert:
2015-08-06  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
    Jiong Wang  <jiong.wang@arm.com>

* config/aarch64/aarch64.d (tlsdesc_small_pseudo_<mode>): New pattern.
* config/aarch64/aarch64.h (reg_class): New enumeration FIXED_REG0.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
* config/aarch64/aarch64.c (aarch64_class_max_nregs): Likewise.
(aarch64_register_move_cost): Likewise.
(aarch64_load_symref_appropriately): Invoke the new added pattern if
possible.
* config/aarch64/constraints.md (Uc0): New constraint.

From-SVN: r228211

re PR other/67652 (liboffloadmic/runtime/offload_engine.cpp:176: strange expression in sizeof ?)

PR other/67652
liboffloadmic/
* runtime/offload_engine.cpp (Engine::init_process): Fix sizeof.

From-SVN: r228210

Now that muser-mode is default the multilib definitions does not require to specify that switch any more.

Now that muser-mode is default the multilib definitions does not require to
specify that switch any more. Add UT699 to multilib after recent patches. Add
AT697F multilib since there are many LEON2 users running RTEMS. Add leon to
multilib too.

gcc/
* config/sparc/t-rtems: Remove -muser-mode. Add ut699, at697f and leon.

From-SVN: r228204

rs6000.c (rs6000_xcoff_asm_named_section): Place SECTION_EXCLUDE in XO mapping class.

* config/rs6000/rs6000.c (rs6000_xcoff_asm_named_section): Place
SECTION_EXCLUDE in XO mapping class.

From-SVN: r228203

re PR target/54236 ([SH] Improve addc and subc insn utilization)

gcc/
PR target/54236
* config/sh/predicates.md (t_reg_operand, negt_reg_operand): Allow
and handle ne and eq codes.
* config/sh/sh.c (sh_rtx_costs): Adjust matching of tst #imm,r0 insn.
(sh_recog_treg_set_expr): Early accept negt_reg_operand.  Eearly reject
CONST_INT_P.  Use reverse_condition.
(sh_split_treg_set_expr): Likewise.

gcc/testsuite/
PR target/54236
* gcc.target/sh/pr54236-1.c (test_09, test_10, test_11): New.
* gcc.target/sh/pr59533-1.c (test_23, test_24, test_25, test_26,
test_27): New.
* gcc.target/sh/pr54236-5.c: New.
* gcc.target/sh/pr54236-6.c: New.

From-SVN: r228202

[Patch 1/2 AArch64/ARM] Give AArch64 ROR (Immediate) a new type attribute

gcc/

* config/arm/types.md (type): Add rotate_imm.
* config/aarch64/aarch64.md (*ror<mode>3_insn): Split out the
ROR immediate case.
(*rorsi3_insn_uxtw): Likewise.
* config/aarch64/thunderx.md (thunderx_shift): Add rotate_imm.
* config/arm/cortex-a53.md (cortex_a53_alu_shift): Add rotate_imm.
* config/arm/cortex-a57.md (cortex_a53_alu): Add rotate_imm.

From-SVN: r228197

Add missing PR line in ChangeLog entry

From-SVN: r228196

[RTL-ifcvt] PR rtl-optimization/67481: Look more deeply for CCmode sets during if-covnersion

PR rtl-optimization/67481
* ifcvt.c (contains_ccmode_rtx_p): New function.
(insn_valid_noce_process_p): Use it.

From-SVN: r228195

[RTL-ifcvt] PR rtl-optimization/67465: Handle pairs of complex+simple blocks and empty blocks more gracefully

        PR rtl-optimization/67456
        PR rtl-optimization/67464
        PR rtl-optimization/67465
        * ifcvt.c (noce_try_cmove_arith): Bail out if cannot conditionally
        move in the mode of x.  Handle combination of complex and simple
        block pairs as well as the case when one is empty.

        * gcc.dg/pr67465.c: New test.

From-SVN: r228194

Add gcc.dg/vect/pr62171.c

2015-09-28  Tom de Vries  <tom@codesourcery.com>

* gcc.dg/vect/pr62171.c: New test.

From-SVN: r228193

update a few places for the change from gimple_statement_base to gimple

gcc/ChangeLog:

2015-09-28  Trevor Saunders  <tbsaunde+gcc@tbsaunde.org>

* doc/gimple.texi: Update references to gimple_statement_base.
* gdbhooks.py: Likewise.
* gimple.h: Likewise.

From-SVN: r228192

Use leon3 target for native LEON on Linux.

2015-09-28  Daniel Cederman  <cederman@gaisler.com>

Use leon3 target for native LEON on Linux. Linux requires LEON version 3 or
above with CASA support.

gcc/
* config/sparc/driver-sparc.c: map LEON to leon3

From-SVN: r228185

Make muser-mode the default for LEON3

2015-09-28  Daniel Cederman  <cederman@gaisler.com>

Make muser-mode the default for LEON3

The muser-mode flag causes the CASA instruction for LEON3 to use the
user mode ASI. This is the correct behavior for almost all LEON3 targets.
For this reason it makes sense to make user mode the default.

gcc/
* config/sparc/sparc.opt: Rename mask from USER_MODE to SV_MODE
  and make it inverse to change default
* config/sparc/sync.md: Only use supervisor ASI for CASA when in
  supervisor mode
* doc/invoke.texi: Document change of default

From-SVN: r228184

Do not use floating point registers when compiling with -msoft-float for SPARC

2015-09-28  Daniel Cederman  <cederman@gaisler.com>

Do not use floating point registers when compiling with -msoft-float for SPARC

__builtin_apply* and __builtin_return accesses the floating point registers on
SPARC even when compiling with -msoft-float.

gcc/
* config/sparc/sparc.c (sparc_function_value_regno_p): Do not return
true on %f0 for a target without FPU.
* config/sparc/sparc.md (untyped_call): Do not save %f0 for a target
without FPU.
(untyped_return): Do not load %f0 for a target without FPU.

From-SVN: r228183

aarch64.md (prefetch): Change the predicate of operand 0 to register_operand.

2015-09-28  Andrew Pinski  <apinski@cavium.com>

* config/aarch64/aarch64.md (prefetch):
Change the predicate of operand 0 to register_operand.

From-SVN: r228182

Daily bump.

From-SVN: r228181

predicates.md (register_sse4nonimm_operand): New predicate.

* config/i386/predicates.md (register_sse4nonimm_operand): New
predicate.
* config/i386/sse.md (PEXTR_MODE12): New mode iterator.
(*vec_extract<mode>): Use PEXTR_MODE12 instead of VI12_128 mode.
Use register_sse4nonimm_operand as operand 0 predicate.
(*vec_extractv8hi_sse2): Remove insn pattern.
(*vec_extract<PEXTR_MODE12:mode>_zext): Merge insn pattern from
*vec_extractv8hi_zext and *vec_extractv16qi_zext patterns.

From-SVN: r228178

pr44641.C: Revert line number change.

        * g++.dg/debug/dwarf2/pr44641.C: Revert line number change. Remove
        skip on AIX.  XFAIL individual line tests.

From-SVN: r228177

re PR target/67391 ([SH] Convert clrt addc to normal add insn)

gcc/
PR target/67391
* config/sh/sh-protos.h (sh_lra_p): Declare.
* config/sh/sh.c (sh_lra_p): Make non-static.
* config/sh/sh.md (addsi3): Use arith_reg_dest for operands[0] and
arith_reg_operand for operands[1].  Remove TARGET_SHMEDIA case.
Expand into addsi3_scr if operands[2] if needed.
(*addsi3_compact): Rename to *addsi3_compact_lra.  Use
arith_reg_operand for operands[1].  Allow it only when LRA is enabled.
(addsi3_scr, *addsi3): New insn_and_split patterns.

Co-Authored-By: Kaz Kojima <kkojima@gcc.gnu.org>
From-SVN: r228176

revert to assign_parms assignments using default defs

Revert the fragile and complicated changes to assign_parms designed to
enable it to use RTL assigments chosen by cfgexpand, and instead have
cfgexpand use the RTL assignments by assign_parms, keying them off of
the default defs that are now necessarily introduced for each parm and
result.  The possible lack of a default def was already a problem, and
the fallbacks in place were not enough, as shown by PR67312.  We now
have checking asserts in set_rtl that verify that we're assigning to
each var a piece of RTL that matches the expectations set forth by
use_register_for_decl.

for  gcc/ChangeLog

PR rtl-optimization/64164
PR tree-optimization/67312
PR middle-end/67340
PR middle-end/67490
PR bootstrap/67597
* cfgexpand.c (parm_in_stack_slot_p): Remove.
(ssa_default_def_partition): Remove.
(get_rtl_for_parm_ssa_default_def): Remove.
(set_rtl): Check that RTL assignments match expectations.
Loop on SUBREGs, CONCATs and PARALLELs subexprs.  Set only the
default def location for params and results.  Record SSA names
or types in REG and MEM attrs, respectively.
(set_parm_rtl): New.
(expand_one_ssa_partition): Drop logic that assigned MEMs with
unassigned addresses.
(adjust_one_expanded_partition_var): Don't accept NULL RTL on
deferred stack alloc vars.
(expand_used_vars): Skip partitions holding parm default defs.
Move adjust_one_expanded_partition_var loop...
(pass_expand::execute): ... here.  Drop redundant assert.
Adjust comments before the final loop over all ssa names.
Require assigned rtl of parms and results to match exactly.
Reset its attributes to match them, not any other variables in
the same partition.
(expand_debug_expr): Use entry value for PARM's default defs
only iff they have zero nondebug uses.
* cfgexpand.h (parm_in_stack_slot_p): Remove.
(get_rtl_for_parm_ssa_default_def): Remove.
(set_parm_rtl): Declare.
* doc/invoke.texi: Improve wording.
* explow.c (promote_decl_mode): Fix promote_function_mode for
result decls not by reference.
(promote_ssa_mode): Disregard BLKmode from promote_decl, and
bypass TYPE_MODE to get the actual vector mode.
* function.c: Include tree-dfa.h.  Revert 2015-08-14's and
2015-08-19's changes as follows.  Drop include of
basic-block.h and df.h.
(rtl_for_parm): Remove.
(maybe_reset_rtl_for_parm): Remove.
(parm_in_unassigned_mem_p): Remove.
(use_register_for_decl): Add logic for RESULT_DECLs matching
assign_parms' behavior.
(split_complex_args): Revert.
(assign_parms_augmented_arg_list): Revert.  Add comment
referencing the logic above.
(assign_parm_adjust_stack_rtl): Revert.
(assign_parm_setup_block): Revert.  Use set_parm_rtl instead
of SET_DECL_RTL.  Set up a REG if the parm demands so.
(assign_parm_setup_reg): Revert.  Consolidated SET_DECL_RTL
calls into a single set_parm_rtl.  Set up a temporary RTL
temporarily for expand_assignment.
(assign_parm_setup_stack): Revert.  Use set_parm_rtl.
(assign_parms_unsplit_complex): Revert.  Use set_parm_rtl.
(assign_bounds): Revert.
(assign_parms): Revert.  Use set_parm_rtl.
(allocate_struct_function): Relayout result and parms of
non-abstruct functions.
(expand_function_start): Revert.  Use set_parm_rtl.  If the
result is not a hard reg, create a pseudo from the promoted
mode of the default def.  Promote static chain mode.
* tree-outof-ssa.c (remove_ssa_form): Drop unused
partition_has_default_def.  Set up
partitions_for_parm_default_defs.
(finish_out_of_ssa): Remove partition_has_default_def.
Release partitions_for_parm_default_defs.
* tree-outof-ssa.h (struct ssaexpand): Remove
partition_has_default_def.  Add
partitions_for_parm_default_defs.
* tree-ssa-coalesce.c: Include tree-dfa.h, tm_p.h and
stor-layout.h.
(build_ssa_conflict_graph): Fix conflict-detection of default
defs of even unused default defs of params and results.
(for_all_parms): New.
(create_default_def): New.
(register_default_def): New.
(coalesce_with_default): New.
(create_outofssa_var_map): Create default defs for all parms
and results, and register their partitions.  Add GIMPLE_RETURN
operands as coalesce candidates with results.  Add default
defs of each parm or result as coalesce candidates with its
other defs.  Mark each result def, and each default def of
parms, as used_in_copy.
(gimple_can_coalesce_p): Call it.  Call use_register_for_decl
with the ssa names, even anonymous ones.  Drop
parm_in_stack_slot_p calls.  Require same signedness and
alignment.
(coalesce_ssa_name): Add coalesce candidates for all defs of
each parm and result, even unused ones.
(parm_default_def_partition_arg): New type.
(set_parm_default_def_partition): New.
(get_parm_default_def_partitions): New.
* tree-ssa-coalesce.h (get_parm_default_def_partitions): New.
* tree-ssa-live.c (partition_view_init): Regard unused defs of
parms and results as used.
(verify_live_on_entry): Don't error out just because they're
not live.

for  gcc/testsuite/ChangeLog

PR rtl-optimization/64164
PR tree-optimization/67312
* gcc.dg/pr67312.c: New.  From Zdenek Sojka.
* gcc.target/i386/stackalign/return-4.c: Add -O.

From-SVN: r228175

* g++.dg/debug/dwarf2/pr44641.C: Add one to expected line numbers.

From-SVN: r228174

Daily bump.

From-SVN: r228173

Fix missing deep copy when assigning a DT constructor to an array

This adds the missing deep copy when assiging a constructor of a derived
type with allocatable components to an array.

The check for constantness is removed so that the deep_copy argument passed
to gfc_trans_scalar_assign is set to true.

PR fortran/67721
gcc/fortran/
* trans-expr.c (gfc_trans_assignment_1): Remove the non-constantness
condition guarding deep copy.
gcc/testsuite/
* gfortran.dg/alloc_comp_deep_copy_3.f03: New.

From-SVN: r228170

re PR fortran/67567 (resolve.c: gfc_error called with iface->module == NULL)

2013-09-26  Paul Thomas  <pault@gcc.gnu.org>

PR fortran/67567
* resolve.c (resolve_fl_procedure): For module procedures, take
the parent module name and the submodule name from the name of
the namespace.

From-SVN: r228169

pr64935-1.c: XFAIL on AIX.

        * gcc.dg/pr64935-1.c: XFAIL on AIX.
        * gcc.dg/pr64935-2.c: XFAIL on AIX.
        * gcc.dg/debug/dwarf2/dwarf2-macro2.c: XFAIL Start new file on AIX.
        * gcc.dg/debug/dwarf2/dwarf2-macro2.c: XFAIL At line number on AIX.
        * gcc.dg/debug/dwarf2/global-used-types.c: XFAIL ascii on AIX.
        * gcc.dg/debug/dwarf2/noreturn-function-keyword.c: XFAIL
        DW_AT_noreturn on AIX.
        * gcc.dg/debug/dwarf2/noreturn-function-attribute.c: XFAIL
        DW_AT_noreturn on AIX.
        * gcc.dg/debug/dwarf2/lang-c89.c: XFAIL DW_AT_language on AIX.
        * gcc.dg/debug/dwarf2/stacked-qualified-types-3.c: XFAIL DW_TAG on AIX.
        * g++.dg/debug/dwarf2/deleted-member-function.C: XFAIL
        DW_AT_GNU_deleted on AIX.
        * g++.dg/debug/dwarf2/noreturn-function.C: XFAIL DW_AT_noreturn on AIX.
        * g++.dg/debug/dwarf2/template-params-6.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/dwarf4-nested.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/pubnames-2.C: Skip on AIX.
        * g++.dg/debug/dwarf2/pr44641.C: Skip on AIX.
        * g++.dg/debug/dwarf2/pr46527.C: XFAIL on AIX.
        * g++.dg/debug/dwarf2/imported-decl-2.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/namespace-1.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/global-used-types-1.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/lambda1.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/pubnames-3.C: Skip on AIX.
        * g++.dg/debug/dwarf2/pr61433.C: XFAIL on AIX.
        * g++.dg/debug/dwarf2/nested-4.C: XFAIL on AIX.
        * g++.dg/debug/dwarf2/template-func-params-6.C: XFAIL ascii on AIX.
        * g++.dg/debug/dwarf2/lineno-simple1.C: XFAIL on AIX.

From-SVN: r228168

dwarf2out.c (XCOFF_DEBUGGING_INFO): Default 0 definition.

        * dwarf2out.c (XCOFF_DEBUGGING_INFO): Default 0 definition.
        (HAVE_XCOFF_DWARF_EXTRAS): Default to 0 definition.
        (output_fde): Don't output length for debug_frame on AIX.
        (output_call_frame_info): Don't output length for debug_frame on AIX.
        (have_macinfo): Force to False for XCOFF_DEBUGGING_INFO and not
        HAVE_XCOFF_DWARF_EXTRAS.
        (add_AT_loc_list): Return early if XCOFF_DEBUGGING_INFO and not
        HAVE_XCOFF_DWARF_EXTRAS.
        (output_compilation_unit_header): Don't output length on AIX.
        (output_pubnames): Don't output length on AIX.
        (output_aranges): Delete argument. Compute length locally. Don't
        output length on AIX.
        (output_line_info): Don't output length on AIX.
        (dwarf2out_finish): Don't compute aranges_length.
        * dwarf2asm.c (XCOFF_DEBUGGING_INFO): Default 0 definition.
        (dw2_asm_output_nstring): Emit .byte not .ascii on AIX.
        * config/rs6000/rs6000.c (rs6000_output_dwarf_dtprel): Emit correct
        symbol decoration for AIX.
        (rs6000_xcoff_debug_unwind_info): New.
        (rs6000_xcoff_asm_named_section): Emit .dwsect pseudo-op
        for SECTION_DEBUG.
        (rs6000_xcoff_declare_function_name): Emit different
        .function pseudo-op when DWARF2_DEBUG. Don't call
        xcoffout_declare_function for DWARF2_DEBUG.
        * config/rs6000/xcoff.h (TARGET_DEBUG_UNWIND_INFO):
        Redefine.
        * config/rs6000/aix71.h: New.
        * configure.ac (gcc_cv_as_aix_dwloc): Check AIX as for DWARF
        locations support.
        * configure: Regenerate.
        * config.gcc (powerpc-ibm-aix[789]+): New stanza for AIX 7.1+ with
        DWARF support.

From-SVN: r228167

[PATCH] Fix undefined behaviour in arc port

* config/arc/arc.c (arc_output_addsi): Fix left shift undefined
behaviour.
* config/arc/constraints.md (Cca, C2a): Fix left shift undefined
behaviour.

From-SVN: r228166

[PATCH] Fix undefined behaviour in SH port

    [PATCH] Fix undefined behaviour in SH port
* config/sh/sh.h (CONST_OK_FOR_J16): Fix left shift undefined
behaviour

From-SVN: r228165

[PATCH] Fix undefined behaviour in mips port

[PATCH] Fix undefined behaviour in mips port
* config/mips/mips.c (mips_compute_frame_info): Fix left shift
undefined behaviour.

From-SVN: r228164

[PATCH] Fix undefined behaviour in cris port

[PATCH] Fix undefined behaviour in cris port
* config/cris/cris.md (asrandb): Fix left shift undefined
behaviour.
(asrandw): Likewise.

From-SVN: r228163

Daily bump.

From-SVN: r228161

re PR fortran/67614 (ICE on using arithmetic if with null)

2015-09-25  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/67614
* resolve.c (gfc_resolve_code): Prevent ICE for invalid EXPR_NULL.

2015-09-25  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/67614
* gfortran.dg/pr67614.f90: New test.

From-SVN: r228156

re PR fortran/67525 (ICE on select type with improper selector)

2015-09-25  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/67525
* parse.c (match_deferred_characteristics): Remove an assert, which
allows an invalid SELECT TYPE selector to be detected.

2015-09-25  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/67525
* gfortran.dg/pr67525.f90: New test.

From-SVN: r228155

Fix type in the changelog entry,

From-SVN: r228154

re PR target/61578 (Code size increase for ARM thumb compared to 4.8.x when compiling with -Os)

2015-09-25  Vladimir Makarov  <vmakarov@redhat.com>

PR target/61578
* lra-constarints.c (match_reload): Check presence of the input pseudo
in the output pseudo.

From-SVN: r228153

Add PR fortran/55603 working test

gcc/testsuite/
PR fortran/55603
* gfortran.dg/allocatable_function_9.f90: New.

From-SVN: r228151

invoke.texi (-fsanitize): Minor wording tweak.

2015-09-25  Tobias Burnus  <burnus@net-b.de>

* doc/invoke.texi (-fsanitize): Minor wording tweak.

From-SVN: r228148

invoke.texi (-fsanitize): Update URLs.

2015-09-25  Tobias Burnus  <burnus@net-b.de>

        * doc/invoke.texi (-fsanitize): Update URLs.

From-SVN: r228144

* tr.po: Update.

From-SVN: r228138

Fix old ChangeLog entry to include global variable name that was changed.

From-SVN: r228137

This patch unsets -freorder-blocks-and-partition when -fprofile-use is not specified.

This patch unsets -freorder-blocks-and-partition when -fprofile-use
is not specified. Function splitting was not actually being performed
in that case, as probably_never_executed_bb_p does not distinguish
any basic blocks as being cold vs hot when there is no profile data.
Leaving it enabled, however, causes the assembly code generator to create
(empty) cold sections and labels, leading to unnecessary size overhead.

2015-09-25  Teresa Johnson  <tejohnson@google.com>

* opts.c (finish_options): Unset -freorder-blocks-and-partition
if not using profile.

From-SVN: r228136

Avoid creating dangling references in case of nested tuples
for tuple constructors that construct from other tuples.

2015-09-25  Ville Voutilainen  <ville.voutilainen@gmail.com>

Avoid creating dangling references in case of nested tuples
for tuple constructors that construct from other tuples.
* include/std/tuple (_TC::_NonNestedTuple): New.
* include/std/tuple (tuple::_TNTC): New.
* include/std/tuple (tuple(const tuple<_UElements...>&),
tuple(tuple<_UElements...>&&): Use _TNTC.
* testsuite/20_util/tuple/cons/nested_tuple_construct.cc: New.

From-SVN: r228134

PR pretty-print/67567 do not pass NULL as a string

Fortran passes NULL where a non-null string is expected by the pretty-printer,
which causes a sanitizer warning. This could have been found earlier by using
gcc_checking_assert. Even if the assertion is false, the result is just an
incomplete diagnostic, thus it seems more user-friendly to assert only when
checking. I do not have any idea how to properly fix the Fortran bug, thus this
patch simply works-around it.

gcc/fortran/ChangeLog:

2015-09-25  Manuel López-Ibáñez  <manu@gcc.gnu.org>

PR pretty-print/67567
* resolve.c (resolve_fl_procedure): Work-around when iface->module
== NULL.

gcc/ChangeLog:

2015-09-25  Manuel López-Ibáñez  <manu@gcc.gnu.org>

PR pretty-print/67567
* pretty-print.c (pp_string): Add gcc_checking_assert.
* pretty-print.h (output_buffer_append_r): Likewise.

From-SVN: r228131

re PR target/67675 ([SH] Improve __builtin_strcmp alignment test)

gcc/
PR target/67675
* config/sh/sh-mem.cc (sh_expand_cmpstr): Check alignment of addr1 and
addr2 individually.  Don't emit logical or insn if one is known to
be aligned approriately.
(sh_expand_cmpnstr): Likewise.

gcc/testsuite/
PR target/67675
* gcc.target/sh/pr67675.c: New.

From-SVN: r228118

[AArch64] Force __builtin_aarch64_fp[sc]r argument into a REG

The testcase triggered an ICE because the builtin expansion
code passed the output of expand_normal directly to the SET_FP[SC]R
generator, without forcing it into a register first.

gcc/
* config/aarch64/aarch64-builtins.c (aarch64_expand_builtin): Force
__builtin_aarch64_fp[sc]r arguments into a register.

gcc/testsuite/
* gcc.target/aarch64/fpcr_fpsr_1.c: New file.

From-SVN: r228116

Rename IA MCU processor lakemount to lakemont

IA MCU processor name is lakemont, not lakemount.

gcc/

* config.gcc (x86_archs): Replace lakemount with lakemont.
(with_cpu): Likewise.
(with_arch): Likewise.
* config/i386/i386-c.c (ix86_target_macros_internal): Replace
PROCESSOR_LAKEMOUNT with PROCESSOR_LAKEMONT.  Replace
__tune_lakemount__ with __tune_lakemont__.
* config/i386/i386.c (lakemount_cost): Renamed to ...
(lakemont_cost): This.
(m_LAKEMOUNT): Renamed to ...
(m_LAKEMONT): This.
(initial_ix86_arch_features): Replace m_LAKEMOUNT with m_LAKEMONT.
(processor_target_table): Replace "lakemount" with "lakemont".
(processor_alias_table): Likewise.
(ix86_issue_rate): Replace PROCESSOR_LAKEMOUNT with
PROCESSOR_LAKEMONT.
(ix86_adjust_cost): Likewise.
(ia32_multipass_dfa_lookahead): Likewise.
* config/i386/i386.h (processor_type): Likewise.
* config/i386/x86-tune.def: Replace m_LAKEMOUNT with m_LAKEMONT.
* doc/invoke.texi: Replace lakemount with lakemont.  Replace
Lakemount with Lakemont.

gcc/testsuite/

* gcc.target/i386/pr66749.c (dg-options): Replace
-mtune=lakemount with -mtune=lakemont.
* gcc.target/i386/pr66821.c (dg-options): Likewise.
* gcc.target/i386/pr67329.c (dg-options): Likewise.

From-SVN: r228115

c-ubsan.c (ubsan_instrument_division): Remove unnecessary code.

* c-ubsan.c (ubsan_instrument_division): Remove unnecessary code.
(ubsan_instrument_shift): Likewise.

* c-c++-common/ubsan/bounds-11.c: New test.
* c-c++-common/ubsan/bounds-12.c: New test.

From-SVN: r228114

re PR sanitizer/64906 (-fsanitize=integer-divide-by-zero creates false -Wmaybe-uninitialized warning)

PR sanitizer/64906
* c-ubsan.c (ubsan_instrument_division): Also pre-evaluate OP1.

* c-c++-common/ubsan/pr64906.c: New test.

From-SVN: r228112

Change IA MCU processor from iamcu to lakemount

The first IA MCU processor will be Lakemount.  This patch changes IA MCU
processor name from iamcu to lakemount.

gcc/

* config.gcc (x86_archs): Replace iamcu with lakemount.
(with_cpu): Likewise.
(with_arch): Likewise.
* doc/invoke.texi: Likewise.
* config/i386/i386-c.c (ix86_target_macros_internal): Replace
PROCESSOR_IAMCU with PROCESSOR_LAKEMOUNT.  Replace
__tune_iamcu__ with __tune_lakemount__.
* config/i386/i386.c (iamcu_cost): Renamed to ...
(lakemount_cost): This.
(m_IAMCU): Renamed to ...
(m_LAKEMOUNT): This.
(initial_ix86_arch_features): Replace m_IAMCU with m_LAKEMOUNT.
(processor_target_table): Replace "iamcu" with "lakemount".
(processor_alias_table): Likewise.
(ix86_issue_rate): Replace PROCESSOR_IAMCU with
PROCESSOR_LAKEMOUNT.
(ix86_adjust_cost): Likewise.
(ia32_multipass_dfa_lookahead): Likewise.
* config/i386/i386.h (processor_type): Likewise.
* config/i386/x86-tune.def: Replace m_IAMCU with m_LAKEMOUNT.

gcc/testsuite/

* gcc.target/i386/pr66749.c (dg-options): Replace -mtune=iamcu
with -mtune=lakemount.
* gcc.target/i386/pr66821.c (dg-options): Likewise.
* gcc.target/i386/pr67329.c (dg-options): Likewise.

From-SVN: r228109

Daily bump.

From-SVN: r228108

pa-linux.h (HAVE_sync_compare_and_swapdi): Define.

* config/pa/pa-linux.h (HAVE_sync_compare_and_swapdi): Define.
* config/pa/pa-protos.h (pa_maybe_emit_compare_and_swap_exchange_loop):
Declare.
* config/pa/pa.c (pa_init_libfuncs): Init sync libfuncs up to 8 bytes.
(pa_expand_compare_and_swap_loop): New.
(pa_maybe_emit_compare_and_swap_exchange_loop): New.
* config/pa/pa.md (atomic_storeqi, atomic_storehi, atomic_storesi,
atomic_storesf, atomic_loaddf, atomic_storedf): New expanders.
(atomic_loaddf_1, atomic_storedf_1): New insn patterns.
(atomic_loaddi, atomic_loaddi_1, atomic_storedi, atomic_storedi_1):
Revise.

From-SVN: r228104

re PR other/57195 (Mode attributes with specific mode iterator can not be used as mode iterators in *.md files)

2015-09-24  Michael Collison  <michael.collison@linaro.org>

PR other/57195
* read-md.c (read_name): Allow mode iterators inside angle
brackets in rtl expressions.

From-SVN: r228102

re PR target/61578 (Code size increase for ARM thumb compared to 4.8.x when compiling with -Os)

2015-09-24  Vladimir Makarov  <vmakarov@redhat.com>

PR target/61578
* ira-color.c (update_allocno_cost): Add parameter.
(update_costs_from_allocno): Decrease conflict cost.  Pass the new
parameter.

From-SVN: r228097

fdiagnostics-color=never does not disable color for some diagnostics

Actually, I was trying to reject non-warning options as argument to
-Werror=. However, the new test fails because -fdiagnostics-color=never is
always placed by the driver after the warning options when calling the compiler
proper. This patch prunes all -fdiagnostics-color from the command-line but the
last one, which is moved to the first position.

gcc/ChangeLog:

2015-09-24  Manuel López-Ibáñez  <manu@gcc.gnu.org>

PR driver/67640
* opts-common.c (prune_options): Discard all -fdiagnostics-color
but the last one, which is moved to the front to be processed
first.
* opts.c (enable_warning_as_error): Reject options that do not
control warnings.

gcc/testsuite/ChangeLog:

2015-09-24  Manuel López-Ibáñez  <manu@gcc.gnu.org>

PR driver/67640
* gcc.dg/Werror-13.c: New test.

From-SVN: r228094

[AArch64] Handle const address in aarch64_print_operand

2015-09-24  Jiong Wang  <jiong.wang@arm.com>

* config/aarch64/aarch64.c (aarch64_print_operand): Add "CONST" support.

From-SVN: r228093

[AArch64] Delete aarch64_symbol_context which is not used

2015-09-24  Jiong Wang  <jiong.wang@arm.com>

* config/aarch64/aarch64-protos.h (aarch64_symbol_context): Delete.
* config/aarch64/aarch64.c (aarch64_expand_mov_immediate): Likewise.
(aarch64_cannot_force_const_mem): Likewise.
(aarch64_classify_address): Likewise.
(aarch64_classify_symbolic_expression): Likewise.
(aarch64_print_operand): Likewise.
(aarch64_classify_symbol): Likewise.
(aarch64_mov_operand_p): Likewise.
* config/aarch64/predicates.md (aarch64_valid_symref): Likewise.
(aarch64_mov_operand): Likewise.

From-SVN: r228092

Leave moved-from std::deque in a valid state

PR libstdc++/67707
* include/bits/stl_deque.h (_Deque_base::_M_move_impl): Initialize
empty object.
* testsuite/23_containers/deque/allocator/move.cc: Check moved-from
deque.

From-SVN: r228090

Fix aarch64/target_attr_10 test following r227997.

gcc/testsuite/ChangeLog:

* gcc.target/aarch64/target_attr_10.c (foo): Use dg-message for note.

From-SVN: r228088

runtime: Fix recent lfstack change on Solaris.

    Reviewed-on: https://go-review.googlesource.com/14922

From-SVN: r228087

rs6000: Fix -mdebug=stack code for spe_gp_offset

2015-09-23  Segher Boessenkool  <segher@kernel.crashing.org>

* config/rs6000/rs6000.c (debug_stack_info): Invert the test
for info->spe_gp_size.

From-SVN: r228086

re PR lto/67699 (ICE (segfault) compiling a const array with -flto)

2015-09-24  Richard Biener  <rguenther@suse.de>

PR lto/67699
* lto-cgraph.c (compute_ltrans_boundary): Do not stream
abstract origins.

* g++.dg/pr67699.C: New testcase.

From-SVN: r228084

ARM: fp16 Fix PR 67624 - Incorrect conversion of float Infinity to __fp16

PR libgcc/67624
libgcc:
* config/arm/fp16.c (__gnu_f2h_internal): Handle infinity correctly.
gcc/testsuite:
* gcc.target/arm/fp16-inf.c: New test.

From-SVN: r228082

Additional changes to switch from gimple to gimple *

gcc/
* tree-object-size.c (plus_stmt_object_size)
(cond_expr_object_size): Change the formal parameters from gimple
to gimple *.
* tree-ssa-sccvn.h (vn_nary_op_insert_stmt): Likewise.
* tree-ssa-sccvn.c (vn_nary_op_insert_stmt): Make it static.
* tree-ssa-sccvn.h (vn_nary_op_insert_stmt): Don't declare.

From-SVN: r228080

avx512vbmi-check.h (main): Fix register name while checking for AVX-512VBMI presence.

gcc/testsuite/
* gcc.target/i386/avx512vbmi-check.h (main): Fix register
name while checking for AVX-512VBMI presence.

From-SVN: r228079

Support PIE on Solaris

gcc/testsuite:
* lib/target-supports.exp (check_effective_target_pie): Check for
PIE support on Solaris 11.x and 12.

libgcc:
* config.host (*-*-solaris2*): Add t-crtstuff-pic to tmake_file.
Add crtbeginS.o, crtendS.o to extra_parts if libgcc_cv_solaris_crts.
* config/sol2/gmon.c: (monstartup): Don't write trailing NUL of
messages.
(internal_mcount): Likewise.
* config/sol2/t-sol2 (crtp.o, crtpg.o, gmon.o): Compile with
crt_compile, add CRTSTUFF_T_CFLAGS_S.

gcc:
* configure.ac (gcc_cv_ld_pie): Check for gld >= 2.26 on Solaris.
Check for ld -type pie on Solaris 11.x and 12.
* configure: Regenerate.
* config.in: Regenerate.

* gcc.c (LD_PIE_SPEC): Allow redefinition.

* config/sol2.h (STARTFILE_CRTBEGIN_SPEC): Define.
(STARTFILE_SPEC): Use it.
(ENDFILE_CRTEND_SPEC): Define.
(ENDFILE_SPEC): Use it and ENDFILE_ARCH_SPEC.
(SUBTARGET_EXTRA_SPECS): Add STARTFILE_CRTBEGIN_SPEC,
ENDFILE_ARCH_SPEC, ENDFILE_CRTEND_SPEC.
[HAVE_LD_PIE && HAVE_SOLARIS_CRTS] (LD_PIE_SPEC): Define.
(!(HAVE_LD_PIE && HAVE_SOLARIS_CRTS)] (LINK_PIE_SPEC): Define.
* config/i386/sol2.h (ENDFILE_SPEC): Remove.
(ENDFILE_ARCH_SPEC): Define.
* config/sparc/sol2.h (ENDFILE_ARCH_SPEC): Define.

From-SVN: r228078

Use CRTs provided by Solaris

gcc:
* configure.ac (gcc_cv_solaris_crts): New test.
* configure. Regenerate.
* config.in: Regenerate.
* config/sol2.h (STARTFILE_SPEC): Simplify, provide
HAVE_SOLARIS_CRTS variant.

libgcc:
* configure.ac (libgcc_cv_solaris_crts): New test.
* configure: Regenerate.
* config.in: Regenerate.
* config/sol2/crtp.c, config/sol2/crtpg.c: New files.
* config/gmon-sol2.c: Rename to ...
* config/sol2/gmon.c: ... this.
Include auto-target.h.
(internal_mcount): Wrap setup handling in !HAVE_SOLARIS_CRTS.
* config/t-sol2: Rename to ...
* config/sol2/t-sol2: ... this.
(gmon.o): Reflect renaming.
(crtp.o, crtpg.o): New rules.
* config.host (*-*-solaris2*): Reflect renaming.
Use system CRTs if present.
Remove default CRT case.

From-SVN: r228077

[tree-inline][obvious] Delete redundant count_insns_seq

* tree-inline.h (count_insns_seq): Delete prototype.
(estimate_num_insns_seq): Define prototype.
* tree-inline.c (count_insns_seq): Delete.
(estimate_num_insns_seq): Remove static qualifier.
* tree-eh.c (decide_copy_try_finally): Replace use of count_insns_seq
with estimate_num_insns_seq.

From-SVN: r228075

tree-ssa-sccvn.h (vn_reference_op_struct): Add clique and base members.

2015-09-24  Richard Biener  <rguenther@suse.de>

* tree-ssa-sccvn.h (vn_reference_op_struct): Add clique and base
members.
* tree-ssa-sccvn.c (copy_reference_ops_from_ref): Record clique
and base for MEM_REF and TARGET_MEM_REF.  Handle BIT_FIELD_REF
offset.
(ao_ref_init_from_vn_reference): Record clique and base in the
built base.
* tree-ssa-pre.c (create_component_ref_by_pieces_1): Likewise

* g++.dg/tree-ssa/restrict3.C: New testcase.

From-SVN: r228074

re PR c/48885 (missed optimization with restrict qualifier?)

2015-09-24  Richard Biener  <rguenther@suse.de>

PR tree-optimization/48885
* tree-ssa-structalias.c (visit_loadstore): Handle default defs
as not including any restrict tags from other pointers.

* gcc.dg/tree-ssa/restrict-6.c: New testcase.

From-SVN: r228073