mesa.git
10 years agor600g: Reinstate include path to common radeon source directory
Michel Dänzer [Fri, 29 Aug 2014 03:09:16 +0000 (12:09 +0900)]
r600g: Reinstate include path to common radeon source directory

Fixes build failure since commit a131263a2f19507ca0d2f6093672d930a7c054d1
('gallium/radeon: cleanup header inclusion'):

../../../../../src/gallium/drivers/r600/evergreen_compute.c:50:30: fatal error: radeon_llvm_util.h: No such file or directory
 #include "radeon_llvm_util.h"
                              ^
compilation terminated.

Trivial.

10 years agoi965: Mark BRW_CONDITIONAL_R as Gen <= 5.
Matt Turner [Thu, 28 Aug 2014 01:39:35 +0000 (18:39 -0700)]
i965: Mark BRW_CONDITIONAL_R as Gen <= 5.

10 years agoi965/disasm: Show jump count for if/iff/halt.
Matt Turner [Tue, 26 Aug 2014 01:40:24 +0000 (18:40 -0700)]
i965/disasm: Show jump count for if/iff/halt.

These instructions don't have pop count.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoi965/disasm: Disassemble JMPI's source properly.
Matt Turner [Sun, 24 Aug 2014 06:59:30 +0000 (23:59 -0700)]
i965/disasm: Disassemble JMPI's source properly.

The source can be a register as well as an immediate, and disassembling
a register as an immediate can have some strange results.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoi965/disasm: Add break/cont/halt to list of has_uip().
Matt Turner [Fri, 22 Aug 2014 00:01:15 +0000 (17:01 -0700)]
i965/disasm: Add break/cont/halt to list of has_uip().

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoi965/disasm: Disassemble Z/NZ conditional modifiers as .z/.nz.
Matt Turner [Sun, 24 Aug 2014 21:49:51 +0000 (14:49 -0700)]
i965/disasm: Disassemble Z/NZ conditional modifiers as .z/.nz.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agonouveau: allow more tokens by default to avoid parse failures
Ilia Mirkin [Fri, 29 Aug 2014 01:52:13 +0000 (21:52 -0400)]
nouveau: allow more tokens by default to avoid parse failures

Also print a note saying that parsing failed to help isolate issues.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
10 years agotargets/haiku-softpipe: explicitly prefix sw/hgl header
Emil Velikov [Thu, 28 Aug 2014 21:22:21 +0000 (22:22 +0100)]
targets/haiku-softpipe: explicitly prefix sw/hgl header

Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agosw/hgl: struct haiku_displaytarget is not public struct
Emil Velikov [Thu, 28 Aug 2014 21:22:20 +0000 (22:22 +0100)]
sw/hgl: struct haiku_displaytarget is not public struct

It is meant to be private within the actual winsys. Remove it from
the exported header, and fold it into it's only user.

Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agoinclude/haiku: fix comment typo
Emil Velikov [Thu, 28 Aug 2014 21:22:19 +0000 (22:22 +0100)]
include/haiku: fix comment typo

Cc: Alexander von Gluck IV <kallisti5@unixzen.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agohgl: trivial bits
Emil Velikov [Thu, 28 Aug 2014 20:54:20 +0000 (21:54 +0100)]
hgl: trivial bits

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agogallium/targets: Break haiku state_tracker out to own directory
Alexander von Gluck IV [Mon, 25 Aug 2014 21:26:15 +0000 (21:26 +0000)]
gallium/targets: Break haiku state_tracker out to own directory

Ack'ed by Emil Velikov <emil.l.velikov@gmail.com>

10 years agogallium/targets: Haiku softpipe, perform better framebuffer validation
Alexander von Gluck IV [Mon, 25 Aug 2014 14:32:42 +0000 (14:32 +0000)]
gallium/targets: Haiku softpipe, perform better framebuffer validation

* Check for back left attachment as well
* Set and act on pipe format none

Ack'ed by Emil Velikov <emil.l.velikov@gmail.com>

10 years agost/egl: ship all the files in the tarball
Emil Velikov [Mon, 18 Aug 2014 22:41:45 +0000 (23:41 +0100)]
st/egl: ship all the files in the tarball

Namely we were missing the headers and the Android/SCons buildscripts.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/clover: sort the sources list
Emil Velikov [Mon, 18 Aug 2014 22:16:24 +0000 (23:16 +0100)]
st/clover: sort the sources list

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/gbm: include the header in the sources list
Emil Velikov [Mon, 18 Aug 2014 00:17:30 +0000 (01:17 +0100)]
st/gbm: include the header in the sources list

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/xlib: Include the headers in the sources list.
Emil Velikov [Sun, 17 Aug 2014 23:54:38 +0000 (00:54 +0100)]
st/xlib: Include the headers in the sources list.

Yet another step towards a working 'make dist'.

Cc: José Fonseca <jfonseca@vmware.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: José Fonseca <jfonseca@vmware.com>
10 years agost/omx: use makefile.sources to handle sources lists
Emil Velikov [Sun, 17 Aug 2014 23:51:07 +0000 (00:51 +0100)]
st/omx: use makefile.sources to handle sources lists

... and add the headers so that 'make check' is happy.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
10 years agost/vdpau: pickup/ship the private header
Emil Velikov [Sun, 17 Aug 2014 23:47:38 +0000 (00:47 +0100)]
st/vdpau: pickup/ship the private header

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
10 years agost/vdpau: remove obsolete define VL_HANDLES
Emil Velikov [Mon, 18 Aug 2014 15:56:48 +0000 (16:56 +0100)]
st/vdpau: remove obsolete define VL_HANDLES

This define is always set and it had no real purpose according to
git log. Seems like it is a leftover from the vl/vdpau prototype
stage.

Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
10 years agost/vega: add headers and SConscript in the tarball
Emil Velikov [Sun, 17 Aug 2014 23:43:16 +0000 (00:43 +0100)]
st/vega: add headers and SConscript in the tarball

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/xa: add remaining files in the tarball
Emil Velikov [Sun, 17 Aug 2014 23:08:26 +0000 (00:08 +0100)]
st/xa: add remaining files in the tarball

Namely
 - the private header (xa_priv.h)
 - README and
 - xa-indent

Sort the sources list while we're here.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/xvmc: pick up the headers for distribution
Emil Velikov [Sun, 17 Aug 2014 23:02:07 +0000 (00:02 +0100)]
st/xvmc: pick up the headers for distribution

 - autotools/make will pick them up in the tarball.
 - Sort the list alphabetically.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agoRevert "configure: Disable xvmc by default"
Emil Velikov [Sun, 17 Aug 2014 22:56:19 +0000 (23:56 +0100)]
Revert "configure: Disable xvmc by default"

This reverts commit 6a19bb56e09e841553ad1295f74fa21bfbbe752a.

The above commit disabled the default build of xvmc as the xvmc tests
were failing. As pointed out by Ilia, the tests are "broken by design"
as they do not test the object that is build but the one that is
installed and setup on the workstation.

With previous commit we moved the programs from the 'make check' to
noinst automake target. This way they won't be run but will be around
for people to use them.

Cc: Tom Stellard <thomas.stellard@amd.com>
10 years agost/xvmc: automake: move tests to noinst
Emil Velikov [Sun, 17 Aug 2014 22:55:48 +0000 (23:55 +0100)]
st/xvmc: automake: move tests to noinst

All the tests require an installed and setup XvMC, thus they
are not good candidates for 'make check'.
Keep them around as the user might want to actually test the
implementation post installation/setup.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Tom Stellard <thomas.stellard@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/sw: add the final files to the tarball
Emil Velikov [Sun, 17 Aug 2014 22:29:56 +0000 (23:29 +0100)]
winsys/sw: add the final files to the tarball

Add the final remaining files into the tarball (make dist), namely:
 - SConscripts
 - Non-autotooled winsys' - android, gdi and hgl.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/sw: automake: consistently use Makefile.sources
Emil Velikov [Sun, 17 Aug 2014 19:15:07 +0000 (20:15 +0100)]
winsys/sw: automake: consistently use Makefile.sources

 - Include the headers within.
 - Update scons to use them.
 - Drop useless include (gallium/drivers) from scons.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/$(hw): ship the Android/SCons scripts in the tarball
Emil Velikov [Sat, 16 Aug 2014 19:42:00 +0000 (20:42 +0100)]
winsys/$(hw): ship the Android/SCons scripts in the tarball

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/$(hw): include headers in Makefile.sources
Emil Velikov [Fri, 15 Aug 2014 22:40:48 +0000 (23:40 +0100)]
winsys/$(hw): include headers in Makefile.sources

Otherwise 'make dist' will not pick them up :'(

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agost/egl: cleanup sw winsys header inclusions
Emil Velikov [Mon, 18 Aug 2014 22:50:06 +0000 (23:50 +0100)]
st/egl: cleanup sw winsys header inclusions

 - Drop duplicate include compiler directives.
 - Leave the sw/ prefix for all the software winsys headers.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/radeon: move radeon_cs_dump.h to drm
Emil Velikov [Fri, 15 Aug 2014 22:07:01 +0000 (23:07 +0100)]
winsys/radeon: move radeon_cs_dump.h to drm

... to ease packaging (make dist).
Update it to fetch libdrm's include/libs via pkg-config.

Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agogallium/radeon: cleanup header inclusion
Emil Velikov [Sat, 16 Aug 2014 16:58:25 +0000 (17:58 +0100)]
gallium/radeon: cleanup header inclusion

 - Add top_srcdir/src/gallium/winsys to GALLIUM_DRIVER_C{XXFLAGS}.
 - Remove top_srcdir/src/gallium/drivers/radeon from the includes.

As a result:
 - Common radeon headers are prefixed with 'radeon/'
 - Winsys header inclusion is prefixed 'radeon/drm'

Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agowinsys/svga: build: cleanup the includes
Emil Velikov [Sat, 16 Aug 2014 19:37:30 +0000 (20:37 +0100)]
winsys/svga: build: cleanup the includes

gallium/drivers is already part fo GALLIUM_WINSYS_CFLAGS.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agowinsys/i915: remove the software winsys
Emil Velikov [Sat, 16 Aug 2014 18:49:28 +0000 (19:49 +0100)]
winsys/i915: remove the software winsys

We stopped building it recently as it was unused and not tested.
Good bye, it's been nice knowing you :)

Cc: Stephane Marchesin <stephane.marchesin@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Stephane Marchesin <stephane.marchesin@gmail.com>
10 years agogallium/ilo: cleanup intel_winsys.h
Emil Velikov [Sat, 16 Aug 2014 18:34:10 +0000 (19:34 +0100)]
gallium/ilo: cleanup intel_winsys.h

Make the header location, inclusion and contents more common with
its i915,r* and nouveau counterparts:

 - Move the header within drivers/ilo.
 - Separate out intel_winsys_create_for_fd into 'drm_public' header.
 - Cleanup the compiler includes.

v2: Move the header to drivers/ilo. Suggested by Chia-I.
v3: Correct intel_winsys.h inclusion. Spotted by Chia-I.

Cc: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
10 years agodocs: mark GL_MAX_VERTEX_ATTRIB_STRIDE as done
Timothy Arceri [Thu, 14 Aug 2014 21:45:50 +0000 (07:45 +1000)]
docs: mark GL_MAX_VERTEX_ATTRIB_STRIDE as done

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
10 years agogallium: add cap for MAX_VERTEX_ATTRIB_STRIDE
Timothy Arceri [Wed, 20 Aug 2014 07:09:58 +0000 (21:09 -1000)]
gallium: add cap for MAX_VERTEX_ATTRIB_STRIDE

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
10 years agomesa: implement GL_MAX_VERTEX_ATTRIB_STRIDE
Timothy Arceri [Thu, 14 Aug 2014 14:16:09 +0000 (00:16 +1000)]
mesa: implement GL_MAX_VERTEX_ATTRIB_STRIDE

V2: moved test for the VertexAttrib*Pointer() functions
 to update_array(), and made constant available for drivers to set

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
10 years agost/clover: Fix build against LLVM SVN >= r216583
Michel Dänzer [Thu, 28 Aug 2014 03:05:21 +0000 (12:05 +0900)]
st/clover: Fix build against LLVM SVN >= r216583

Reviewed-by: Francisco Jerez <currojerez@riseup.net>
10 years agodraw: fix base instance handling in llvm path
Roland Scheidegger [Mon, 25 Aug 2014 20:05:16 +0000 (22:05 +0200)]
draw: fix base instance handling in llvm path

The base instance needs to be passed to the jited function, otherwise the
instanced data fetch will only work with the same start instance when the
jit function was created (and baking that into the key instead is not a viable
option).
This fixes piglit arb_base_instance-drawarrays (modulo some unrelated
core/compat context trouble I get for the test).
And fix the pipe cap bit in llvmpipe for it now that it actually works (it
already worked for softpipe).

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
10 years agodocs: fix up status of softpipe, llvmpipe
Roland Scheidegger [Mon, 25 Aug 2014 16:21:53 +0000 (18:21 +0200)]
docs: fix up status of softpipe, llvmpipe

The docs were never really up to date for them, missing just about everything.
So mark them off as all done for GL 3.3 (though softpipe is in fact quite
broken for some newer things especially wrt texturing, and both don't have
compliant, real msaa support). And add the extensions missing too (no
guarantee of completeness).

Reviewed-by: Dave Airlie <airlied@gmail.com>
10 years agoglsl: Add strings.h on non-MSC platforms
Alexander von Gluck IV [Wed, 27 Aug 2014 20:37:46 +0000 (20:37 +0000)]
glsl: Add strings.h on non-MSC platforms

* IEEE Std 1003.1-2001 placed strcasecmp() in strings.h.
* ISO C99 doesn't mention strcase* in string.h
* On all platforms I could find, strcasecmp is in strings.h and string.h
  as a compatibility layer for software written pre-2001 POSIX
* Technically strcasecmp should be only in strings.h and the man
  pages back this up.
* Tested build on CentOS and Haiku

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
10 years agoradeon/uvd: remove comment about RV770
Alex Deucher [Wed, 27 Aug 2014 03:08:07 +0000 (23:08 -0400)]
radeon/uvd: remove comment about RV770

It doesn't seem to support field based decode after testing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
10 years agoradeon/uvd: fix field handling on R6XX style UVD
Christian König [Sun, 24 Aug 2014 10:22:08 +0000 (12:22 +0200)]
radeon/uvd: fix field handling on R6XX style UVD

The first UVD generation can only do frame based output.

Signed-off-by: Christian König <christian.koenig@amd.com>
10 years agovl/compositor: set the scissor before clearing the render target
Christian König [Wed, 13 Aug 2014 19:01:33 +0000 (21:01 +0200)]
vl/compositor: set the scissor before clearing the render target

Otherwise we clear areas that shouldn't be cleared.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
10 years agost/vdpau: fix vlVdpOutputSurfaceRender(Output|Bitmap)Surface
Christian König [Wed, 13 Aug 2014 18:21:06 +0000 (20:21 +0200)]
st/vdpau: fix vlVdpOutputSurfaceRender(Output|Bitmap)Surface

Correctly handle that the source_surface is only optional.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80561

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
10 years agoilo: use genhw command opcodes
Chia-I Wu [Thu, 21 Aug 2014 04:51:08 +0000 (12:51 +0800)]
ilo: use genhw command opcodes

Replace ILO_GPE_MI and ILO_GPE_CMD with magic values by descriptive genhw
macros.

10 years agoilo: rename intel_bo_map_unsynchronized()
Chia-I Wu [Tue, 26 Aug 2014 05:41:11 +0000 (13:41 +0800)]
ilo: rename intel_bo_map_unsynchronized()

Rename it to intel_bo_map_gtt_async().

10 years agoilo: remove max_batch_size
Chia-I Wu [Tue, 26 Aug 2014 05:31:29 +0000 (13:31 +0800)]
ilo: remove max_batch_size

It is used to derive an artificial limit on max relocs per bo.  We choose not
to export it anymore.

10 years agoilo: replace domains by reloc flags
Chia-I Wu [Tue, 26 Aug 2014 04:36:33 +0000 (12:36 +0800)]
ilo: replace domains by reloc flags

It is simpler and is supported by the kernel.  It cannot be used with
libdrm_intel yet though.

10 years agodocs: Update who is working on tessellation
Chris Forbes [Mon, 25 Aug 2014 19:51:11 +0000 (07:51 +1200)]
docs: Update who is working on tessellation

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
10 years agoglsl: Remove bogus "OUPTUT" token
Chris Forbes [Fri, 22 Aug 2014 08:59:42 +0000 (20:59 +1200)]
glsl: Remove bogus "OUPTUT" token

This is never used. There is another token "OUTPUT" which the lexer can
generate, though. This has been around since the dawn of time; is most
likely a typo.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
10 years agoradeonsi: handle PIPE_BIND_BLENDABLE
Marek Olšák [Sat, 23 Aug 2014 09:19:29 +0000 (11:19 +0200)]
radeonsi: handle PIPE_BIND_BLENDABLE

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
10 years agor600g: only set PIPE_BIND_BLENDABLE if colorbuffer rendering is supported
Marek Olšák [Sat, 23 Aug 2014 09:18:43 +0000 (11:18 +0200)]
r600g: only set PIPE_BIND_BLENDABLE if colorbuffer rendering is supported

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
10 years agor300g: handle PIPE_BIND_BLENDABLE
Marek Olšák [Fri, 22 Aug 2014 17:49:00 +0000 (19:49 +0200)]
r300g: handle PIPE_BIND_BLENDABLE

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
10 years agovc4: Stop doing qpu_inst(add, NOP) or qpu_inst(NOP, mul).
Eric Anholt [Mon, 25 Aug 2014 00:58:24 +0000 (17:58 -0700)]
vc4: Stop doing qpu_inst(add, NOP) or qpu_inst(NOP, mul).

Now that the extra WADDR is set, we can knock this off.  Saves a lot of
typing, and makes this code much more legible.

10 years agovc4: Set the other WADDR in the qpu instruction helpers.
Eric Anholt [Mon, 25 Aug 2014 00:53:00 +0000 (17:53 -0700)]
vc4: Set the other WADDR in the qpu instruction helpers.

Now you don't need to qpu_inst() your instruction with a NOP to get the
other waddr set.

10 years agovc4: Merge qpu_a_NOP() and qpu_m_NOP to a single qpu_NOP() helper.
Eric Anholt [Mon, 25 Aug 2014 00:47:02 +0000 (17:47 -0700)]
vc4: Merge qpu_a_NOP() and qpu_m_NOP to a single qpu_NOP() helper.

Now that qpu_inst() ignores the WADDR from the other half of the
instruction, we can set both the ADD and MUL WADDRs in the NOP helper.
Thanks to that, we also no longer need to qpu_inst(NOP, NOP).

10 years agovc4: Ignore WADDRs from the other half of the instruction when merging.
Eric Anholt [Mon, 25 Aug 2014 00:43:02 +0000 (17:43 -0700)]
vc4: Ignore WADDRs from the other half of the instruction when merging.

This allows setting the opposite-side WADDR to NOP (a non-zero value) in
qpu_* helpers, so that we don't need to qpu_inst() merge them with NOPs
all the time just to get the waddr set.

10 years agovc4: Fix LT/GE set-0-or-1 compares.
Eric Anholt [Sun, 24 Aug 2014 21:41:06 +0000 (14:41 -0700)]
vc4: Fix LT/GE set-0-or-1 compares.

We were using the integer sub, which worked for the common case of EQ and
NE.  Fixes fs-lessThan-ivec2-ivec2 and other tests.

10 years agou_vbuf: Add a few more format fallbacks.
Eric Anholt [Fri, 22 Aug 2014 17:50:15 +0000 (10:50 -0700)]
u_vbuf: Add a few more format fallbacks.

Fixes piglit draw-vertices and gl-2.0-vertexattribpointer on vc4, where
I'm only advertising R32F to RGBA32F support so far.

Note: regresses gl-1.5-normal3b3s-invariance due to introduced flushes and
missing depth buffer load/store support in the driver.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
10 years agou_vbuf: Simplify the format fallback translation.
Eric Anholt [Fri, 22 Aug 2014 17:34:55 +0000 (10:34 -0700)]
u_vbuf: Simplify the format fallback translation.

Individual caps made supporting new fallbacks more complicated than it
needed to be.  Instead, just make a table of fallbacks at context init
time.

v2: Fix inverted "do we need to install vbuf?" flagging caught by Marek.

Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v2)
10 years agofreedreno/a2xx: fix segfault
Rob Clark [Sun, 24 Aug 2014 17:06:37 +0000 (13:06 -0400)]
freedreno/a2xx: fix segfault

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno/a3xx: handle first/last level properly
Rob Clark [Sat, 23 Aug 2014 15:35:31 +0000 (11:35 -0400)]
freedreno/a3xx: handle first/last level properly

Fixes some assumptions about first_level being zero.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: implement pipe_flush_resource()
Rob Clark [Sat, 23 Aug 2014 13:33:50 +0000 (09:33 -0400)]
freedreno: implement pipe_flush_resource()

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agofreedreno: don't ignore src/dst level
Rob Clark [Fri, 22 Aug 2014 22:33:15 +0000 (18:33 -0400)]
freedreno: don't ignore src/dst level

Don't ignore src/dst_level in pipe_copy_region.

Signed-off-by: Rob Clark <robclark@freedesktop.org>
10 years agovc4: Fix save/restore of the VS/FS in the blitter.
Eric Anholt [Fri, 22 Aug 2014 23:49:02 +0000 (16:49 -0700)]
vc4: Fix save/restore of the VS/FS in the blitter.

When I made the shader cache take the .fs member and moved the binding
point to .bind_fs, I failed to update these.  Fixes crashes in
copyteximage-related tests.

10 years agovc4: Clear padding of ioctl arguments.
Eric Anholt [Fri, 22 Aug 2014 23:36:29 +0000 (16:36 -0700)]
vc4: Clear padding of ioctl arguments.

Fixes valgrind complaints from valgrind being unaware of our ioctls.

10 years agoauxilary/os: Add Solaris support in os_get_total_physical_memory.
Vinson Lee [Fri, 22 Aug 2014 17:18:40 +0000 (10:18 -0700)]
auxilary/os: Add Solaris support in os_get_total_physical_memory.

The patch fixes the build on Oracle Solaris.

  CC     os/os_misc.lo
"os/os_misc.c", line 59: #error: unexpected platform in os_sysinfo.c

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
10 years agogallium/targets: Haiku, Fix some improper type warnings
Alexander von Gluck IV [Thu, 21 Aug 2014 20:00:59 +0000 (20:00 +0000)]
gallium/targets: Haiku, Fix some improper type warnings

10 years agogallium/targets: Clean up Haiku softpipe renderer visual
Alexander von Gluck IV [Thu, 21 Aug 2014 19:53:02 +0000 (19:53 +0000)]
gallium/targets: Clean up Haiku softpipe renderer visual

* Drop creating gl_config first as it's only really used
  to create the state tracker visual.

10 years agoglcpp: Don't use alternation in the lookahead for empty pragmas.
Carl Worth [Mon, 18 Aug 2014 18:36:12 +0000 (11:36 -0700)]
glcpp: Don't use alternation in the lookahead for empty pragmas.

We've found that there's a buffer overrun bug in flex that's triggered by
using alternation in a lookahead pattern.

Fortunately, we don't need to match the exact {NEWLINE} expression to
detect an empty pragma. It suffices to verify that there are no non-space
characters before any newline character. So we can use a simple [\r\n] to
get the desired behavior while avoiding the flex bug.

Fixes the regression of piglit's 17000-consecutive-chars-identifier test,
(which has been crashing since commit
04e40fd337a244ee77ef9553985e9398ff0344af ).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82472
Signed-off-by: Carl Worth <cworth@cworth.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
CC: <mesa-stable@lists.freedesktop.org>
10 years agoi965: Disable try_emit_b2f_of_compare on Gen4-6.
Kenneth Graunke [Sat, 16 Aug 2014 22:18:21 +0000 (15:18 -0700)]
i965: Disable try_emit_b2f_of_compare on Gen4-6.

The optimization relies on CMP setting the destination to 0, which is
equivalent to 0.0f.  However, early platforms only set the least
significant byte, leaving the other bits undefined.  So, we must disable
the optimization on those platforms.

Oddly, Sandybridge wasn't reported as broken.  The PRM states that it
only sets the LSB, but the internal documentation says that it follows
the IVB behavior.  Since it wasn't reported as broken, we believe it
really does follow the IVB behavior.

v2: Allow the optimization on Sandybridge (requested by Matt).

+32 piglits on Ironlake.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?=79963
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
10 years agoi965/fs: Preserve CFG in predicated break pass.
Matt Turner [Thu, 17 Jul 2014 17:50:31 +0000 (10:50 -0700)]
i965/fs: Preserve CFG in predicated break pass.

Operating on this code,

B0: ...
    cmp.ne.f0(8)
    (+f0) if(8)
B1: break(8)
B2: endif(8)

We can delete B2 without attempting to merge any blocks, since the
break/continue instruction necessarily ends the previous block.

After deleting the if instruction, we attempt to merge blocks B0 and B1.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/fs: Rename variable in predicated break pass.
Matt Turner [Thu, 17 Jul 2014 18:14:02 +0000 (11:14 -0700)]
i965/fs: Rename variable in predicated break pass.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/fs: Preserve CFG in the SEL peephole.
Matt Turner [Thu, 17 Jul 2014 04:51:19 +0000 (21:51 -0700)]
i965/fs: Preserve CFG in the SEL peephole.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965: Preserve CFG when deleting dead control flow.
Matt Turner [Wed, 16 Jul 2014 22:29:41 +0000 (15:29 -0700)]
i965: Preserve CFG when deleting dead control flow.

This pass deletes an IF/ELSE/ENDIF or IF/ENDIF sequence, or the ELSE in
an ELSE/ENDIF sequence.

In the typical case (where IF and ENDIF) aren't the only instructions in
their basic blocks, we can simply remove the instructions (implicitly
deleting the block containing only the ELSE), and attempt to merge
blocks B0 and B2 together.

B0: ...
    (+f0) if(8)
B1: else(8)
B2: endif(8)
    ...

If the IF or ENDIF instructions are the only instructions in their
respective basic blocks (which are deleted by the removal of the
instructions), we'll want to instead merge the next blocks.

Both B0 and B2 are possibly removed by the removal of if & endif.
Same situation for if/endif. E.g., in the following example we'd remove
blocks B1 and B2, and then attempt to combine B0 and B3.

B0: ...
B1: (+f0) if(8)
B2: endif(8)
B3: ...

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/cfg: Add functions to combine basic blocks.
Matt Turner [Tue, 15 Jul 2014 21:51:43 +0000 (14:51 -0700)]
i965/cfg: Add functions to combine basic blocks.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/cfg: Point to bblock_t containing associated control flow
Matt Turner [Wed, 16 Jul 2014 22:20:15 +0000 (15:20 -0700)]
i965/cfg: Point to bblock_t containing associated control flow

... rather than pointing directly to the associated instruction. This
will let us set the block containing the IF statement's else-pointer to
NULL, when we delete a useless ELSE instruction, as in the case

   (+f0) if(8)
   ...
   else(8)
   endif(8)

Also, remove the pointer to the ENDIF, since it's unused, and it was
also potentially wrong, in the case of a basic block containing both an
ENDIF and an IF instruction:

   endif(8)
   cmp.ne.f0(8) ...
   (+f0) if(8)

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/fs: Preserve CFG in register allocation.
Matt Turner [Tue, 15 Jul 2014 18:45:20 +0000 (11:45 -0700)]
i965/fs: Preserve CFG in register allocation.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965: Use basic-block aware insertion/removal functions.
Matt Turner [Sun, 13 Jul 2014 04:18:39 +0000 (21:18 -0700)]
i965: Use basic-block aware insertion/removal functions.

To avoid invalidating and recreating the control flow graph. Also stop
invalidating the CFG in places we didn't add or remove an instruction.

cfg calculations:     202951 -> 80307 (-60.43%)

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965: Add invalidate_cfg parameter to invalidate_live_intervals().
Matt Turner [Sun, 13 Jul 2014 00:49:32 +0000 (17:49 -0700)]
i965: Add invalidate_cfg parameter to invalidate_live_intervals().

Will let us avoid invalidating the CFG if the optimization pass has
removed instructions using the new basic block methods.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965: Add basic-block aware backend_instruction::insert_* methods.
Matt Turner [Sun, 13 Jul 2014 04:18:08 +0000 (21:18 -0700)]
i965: Add basic-block aware backend_instruction::insert_* methods.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965: Add a basic-block aware backend_instruction::remove method.
Matt Turner [Sun, 13 Jul 2014 04:16:34 +0000 (21:16 -0700)]
i965: Add a basic-block aware backend_instruction::remove method.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/cfg: Add a function to remove a block from the cfg.
Matt Turner [Mon, 14 Jul 2014 05:17:50 +0000 (22:17 -0700)]
i965/cfg: Add a function to remove a block from the cfg.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agoi965/cfg: Add functions to test if a block is a successor/predecessor.
Matt Turner [Wed, 16 Jul 2014 19:14:41 +0000 (12:14 -0700)]
i965/cfg: Add functions to test if a block is a successor/predecessor.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
10 years agovc4: Add support for fragment discards.
Eric Anholt [Thu, 21 Aug 2014 20:12:19 +0000 (13:12 -0700)]
vc4: Add support for fragment discards.

Fixes piglit glsl-fs-discard-01 and -03, and allows a lot of mesa demos to
start running.  glsl-fs-discard-02 has a problem where the first tile is
not getting stored on the first render.

10 years agovc4: Make some helpers for setting condition codes in instructions.
Eric Anholt [Thu, 21 Aug 2014 20:17:58 +0000 (13:17 -0700)]
vc4: Make some helpers for setting condition codes in instructions.

10 years agovc4: Avoid using undefined values when there's no color write.
Eric Anholt [Thu, 21 Aug 2014 19:47:14 +0000 (12:47 -0700)]
vc4: Avoid using undefined values when there's no color write.

The simulator assertion fails when you read-before-write a temporary
value, and there's no point in doing the packing if there was no color
written.

10 years agovc4: Emit the scoreboard wait just when it's needed.
Eric Anholt [Wed, 20 Aug 2014 21:51:08 +0000 (14:51 -0700)]
vc4: Emit the scoreboard wait just when it's needed.

This should improve performance on real hardware by allowing more shader
instances to run in parallel.  It also fixes assertion failures in tests
that don't emit a fragment color, since otherwise we didn't have enough
instructions to fit our signals in.

10 years agovc4: Fix FLR for integer values less than 0.
Eric Anholt [Wed, 20 Aug 2014 21:44:36 +0000 (14:44 -0700)]
vc4: Fix FLR for integer values less than 0.

If we didn't truncate at all, then we don't need to fix for truncation
happening in the wrong direction.

Fixes piglit builtin-functions/*-floor-*

10 years agovc4: Fix totally broken assertions about inter-instruction reg conflicts.
Eric Anholt [Wed, 20 Aug 2014 21:20:17 +0000 (14:20 -0700)]
vc4: Fix totally broken assertions about inter-instruction reg conflicts.

The spec citation talked about A and B, and I proceeded to pay no
attention to whether the waddrs were for A or B.  As a result, this pair
of instructions would claim to conflict:

mov ra4, ra4 ; nop nop, r0, r0
mov.ns ra4, rb4 ; nop nop, r0, r0

10 years agovc4: Add support for all the texture and FBO formats we can.
Eric Anholt [Wed, 20 Aug 2014 06:14:51 +0000 (23:14 -0700)]
vc4: Add support for all the texture and FBO formats we can.

Now that tiling is in place, we can expose the other formats.  Depth is
still broken (need to make changes in the shader), but if you don't expose
it things crash all over.  SNORM is dropped, but we could re-add it later
with some shader fixes to handle converting between [0,1] and [-1,1].

10 years agovc4: Add support for texture tiling.
Eric Anholt [Tue, 19 Aug 2014 16:40:37 +0000 (09:40 -0700)]
vc4: Add support for texture tiling.

This still treats everything as RGBA8888 for the most part, same as
before.  This is a prerequisite for handling other texture formats, since
only RGBA8888 has a raster-layout mode.

10 years agovc4: Fix a typo in the validation for miplevels.
Eric Anholt [Wed, 20 Aug 2014 17:59:38 +0000 (10:59 -0700)]
vc4: Fix a typo in the validation for miplevels.

It meant that LUMALPHA was being marked as *many* miplevels, and
unsurprisingly wouldn't validate.  On the other hand, some miplevel counts
wouldn't get the small mips validated at all.

10 years agovc4: Convert to using an enum for texture data types
Eric Anholt [Tue, 19 Aug 2014 16:47:20 +0000 (09:47 -0700)]
vc4: Convert to using an enum for texture data types

10 years agovc4: Stop complaining about unknown texture channel types.
Eric Anholt [Wed, 20 Aug 2014 16:31:26 +0000 (09:31 -0700)]
vc4: Stop complaining about unknown texture channel types.

It doesn't matter to this code -- the sampler always returns 8-bit unorm
rgba.

10 years agovc4: Include stdio/stdlib in headers so I don't have to include it per file.
Eric Anholt [Tue, 19 Aug 2014 17:34:15 +0000 (10:34 -0700)]
vc4: Include stdio/stdlib in headers so I don't have to include it per file.

There are a few tools I want to have always available, and fprintf() and
abort() are among them.

10 years agoi965: Fix JIP/UIP calculations.
Matt Turner [Fri, 22 Aug 2014 06:02:49 +0000 (23:02 -0700)]
i965: Fix JIP/UIP calculations.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82846
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82929

10 years agost/clover: Change platform name from Default to Clover
Aaron Watry [Thu, 21 Aug 2014 19:50:51 +0000 (14:50 -0500)]
st/clover: Change platform name from Default to Clover

Signed-off-by: Aaron Watry <awatry at gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>