hplip: bump to version 3.13.10

Sections of the hplip-fix-make.patch patch file were removed, because they
no longer appear in the Makefile.am file.

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iptables: add support for connlabel match and nfnl_osf

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ipset: bump to version 6.20.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.8.7-3

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: disable fallocate for avr32

The fallocate syscall is not implemented in the avr32 toolchain.

Fixes build failures such as the following.

  http://autobuild.buildroot.net/results/bc4/bc41a3fea20181526eb247ac910244aa2aa4c4c0/

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uboot-tools: factor out common mkimage infrastructure

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-cpio: add U-Boot image support

Adds U-Boot image support for cpio root filesystems. This allows you to
use the bootm command in U-Boot to load the rootfs. It makes it possible to
verify the CRC of the initramfs before booting the kernel.

[Spenser: wrote first version of the patch.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-ext2: symlink with the compressed rootfs

Previously, a symlink was created to the uncompressed filesystem,
which made it a bit useless in case compression was chosen.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-common: refactor the common compression commands

This makes the compression extension available in a variable, so it
can be used by the fs-specific commands. In this patch, it is used
by iso9660. Following patches show more use cases.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-cpio: whitespace cleanup in Config.in

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-common: remove the now unused ROOTFS_<PKG>_POST_GEN_HOOKS

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rootfs-ext2: make the symlink as a _POST_TARGET

This will allow us to remove the unused ROOTFS_$(FSTYPE)_POST_GEN_HOOKS.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: factorize regular expressions

Based on a suggestion from Peter, this commit factorizes the logic and
regular expressions that are used to find the sysroot and libdir for a
given compiler. It reduces a bit the duplication of code, and
centralizes the most bizarre part of this logic in one place.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: update comments

[Peter: drop extra # as pointed out by Baruch Siach]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: fix the SYSROOT_DIR mangling logic

In a1d94aaa3a21911 ('toolchain-external: add support for musl C
library'), we made the following change to the SYSROOT_DIR mangling
logic:

-       SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(32|64)?/(.*/)?libc\.a::'` ; \
+       SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:(usr/)?lib(32|64)?/(.*/)?libc\.a::'` ; \

This was needed to accomodate for musl based toolchains that don't
have libc.a in usr/lib/..., but directory in lib/... Basically, the
change makes the usr/ at the beginning optional.

However, with the very permissive (.*) matching in the middle of the
path, the change above had an unexpected consequence: any path contain
'/lib' would be truncated before this lib. As an example, Peter
reported that his builds, running from /var/lib/buildbot/ were no
longer working because the SYSROOT_DIR was decided to be /var instead
of something like
/var/lib/buildbot/buildroot/output/host/opt/ext-toolchain/arm-linux-gnueabihf/libc/.

So, this commit changes (again!) this regexp by changing (.*) to
([^/]*), the idea being that it will match only *one* path
component. Note that this intermediate (.*) directory was added in
e6e60becb008 ('external-toolchain: add support for Linaro 2012.01') to
accomodate for Linaro toolchains that have a subdirectory in their
sysroot named after the target tuple:

$ ./output/host/opt/ext-toolchain/bin/arm-linux-gnueabihf-gcc -print-file-name=libc.a
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../arm-linux-gnueabihf/libc/usr/lib/arm-linux-gnueabihf/libc.a

In addition to this, this commit also makes sure that the change
making usr/ optional is properly reported on all the instances of this
regular expression.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: clean up 'Patching' message

The 'Patching' message in the generic infrastructure prints not only the
package name, but also a reference to the assumed package directory, based
on FOO_DIR_PREFIX/FOO_RAWNAME. This doesn't really add value, as the name
of the package is already apparent from the message and its location should
be obvious. Hence, this patch simply reduces the print to "Patching".

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: remove incorrect default for FOO_DIR_PREFIX

Variable FOO_DIR_PREFIX is populated from pkgparentdir by the various
package infrastructures. However, if that would be empty (which in fact is
the case for the linux package), FOO_DIR_PREFIX would be set to
'$(TOP_SRCDIR)/package'.
Not only does this make no sense (LINUX_DIR_PREFIX becomes /package/linux,
and for all other packages pkgparentdir is not-empty anyway), but it is also
using a non-existing variable TOP_SRCDIR.
This patch therefore removes the incorrect default.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: add some info on the POST_RSYNC hook

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: split info on hooks to a separate section/file

Split out the information on hooks to a separate section (and source file).
Not only because the hooks are useful for all infrastructures (and thus
don't really fit specifically in the generic infrastructure section), but
also for clarity when the info on hooks will be expanded in later patches.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: centralize rsync exclude list for VCS files

Buildroot has three places where rsync is used:
1. to copy the target skeleton
2. to copy the rootfs overlay(s)
3. to copy overridden package sources

In all of these cases, we want to exclude version control files by default.
Place 1 and 2 used an identical set of explicit --exclude options, while
place 3 used the option --cvs-exclude. This last option, however, not only
excludes version control files, but also binary files (.o, .so) and any file
or directory named 'core' (a problem for the linux kernel that has several
directories with this name). Moreover, the exact list of excluded files when
using --cvs-exclude depends on the version of rsync.

This patch creates one global variable RSYNC_VCS_EXCLUSIONS that can be used
by the various rsync commands. It excludes the version control files of
svn, git, hg, cvs and bzr.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: Add POST_RSYNC_HOOKS support

One of the use cases is for the 'local packages' to restore
the SCM info.  Some packages use this information to generate
version info during build time.  In this case, the local package
can have this hook to restore it by symbolic link for example.

[Thomas: update commit title]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Avoid toolchain download when it is preinstalled

For configurations using a toolchain that is preinstalled on
the host, <pkg>_SITE and <pkg>_SOURCE variables must be kept
empty to avoid downloading any toolchain package.
The actual implementation has been proposed by Thomas Petazzoni.

Signed-off-by: GONZALEZ Laurent <br2@gezedo.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in files: add missing dependencies to toolchain option comments

When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:

config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR

comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR

This comment should actually be:

comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR

or if possible (typically when B is a package config option declared in that
same Config.in file):

if BR2_B

comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR

[other config options depending on B]

endif

Otherwise, the comment would be visible even though the other dependencies
are not met.

This patch adds such missing dependencies, and changes existing such
dependencies from
  depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
  depends on BR2_BASE_DEP
  depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
 (untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: clarify that Config.in comments should have correct dependencies

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5webkit: fix build with bison-3.0

- Add host-bison dependency
- Fetch patch from upstream fixing build with bison-3.0
  (already included in the next 5.2 release)

Fixes:
http://autobuild.buildroot.net/results/283/2831c0d859b035f7d2786f51885833a711b46b80/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: fix rpi/egl support (vc_dispmanx_element_change_attributes proto mismatch)

Patch from upstream already included in the next 5.2 release

Fixes:
http://autobuild.buildroot.net/results/347/347577bf1dee0fec3302a45f278eb253118a5b6f/build-end.log

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xorg: needs thread support

libpthread-stubs, libX11, and a few more xorg packages use threads. Since
almost all xorg packages depend on libX11 directory or indirectly, and
since the remaining ones are pretty useless on their own, just require
threads for xorg as a whole.

The thread dependency is kept in libpthread-stubs, because that package
will move out of the x11r7 directory later (pending patch by Spenser
Gilliland), so the dependency on threads will be required then.

Fixes:
  http://autobuild.buildroot.org/results/609/6099baac4bb469ae18aab6512233db25183eaabd/

[Arnout: disable all of xorg, correct comment]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xlib_libpthread-stubs: needs -pthread when linking statically

Fixes e.g. http://autobuild.buildroot.net/results/1eaa694263b74313b0c90c510abcb11d490a3773/

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Generation of locales: made call to tr more robust and added LOWERCASE macro

When calling 'tr' without quoting braces, bash can make really weird things
if there are existing 'single-letter-named' directories
eg:
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
aaa
thierry@thierry-desktop:~$ mkdir m
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
AAA

The (quick) analysis is that the callee (tr) argvs then
contain 'm' thus the translation does not work

Using quotes works around it:
thierry@thierry-desktop:~$ echo AAA | tr '[A-Z]' '[a-z]'
aaa

Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zmqpp: fix build failure

The zmqpp client needs a little help to link against libpthread. Fix build
failures such as the following.

  http://autobuild.buildroot.net/results/d0a/d0a740d4d5414844ca7f2de266fc92223d3d20c8

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmicrohttpd: disable epoll support on avr32

As it isn't available.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: fix MIPS variables

The BR2_UCLIBC_MIPS_ISA hidden Config.in variable defines which uClibc
config option should be enabled for a given MIPS architecture
variant. Therefore, using lower case names doesn't work: they should
be upper case, to match uClibc config option names. This commit makes
sure the mips32, mips32r2 and mips64 builds select the appropriate
uClibc configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freetype: add libpng to freetype-config and freetype2.pc

Add libpng libraries to freetype-config and freetype2.pc when they're
needed to avoid build breakage for other packages.

Patch in a different form is already upstream.

Fixing configure & friends is not so good since autoreconf busts things
up because of the odd way things are done (upstream fixed too it seems).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: rename rpi_defconfig for consistency

We name all of our boards and defconfig files based on the boards
fullname, not a nickname or a shortname.

'rpi' is short for Raspberry Pi, so name all our Raspberry Pi ressource
with 'raspberrypi' instead of 'rpi'.

This should also help Buildroot-newcomers to recognise Raspberry Pi
related files (defconfig and board doc).

Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: reverse the rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: bump version

From the announcement:

This release fixes a security bug:

 * sshd(8): fix a memory corruption problem triggered during rekeying
   when an AES-GCM cipher is selected. Full details of the vulnerability
   are available at: http://www.openssh.com/txt/gcmrekey.adv

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libqrencode: select libpng only when tools are selected

As stated on the libqrencode web site, PNG (or SDL) is only
needed for the test and utility programs; the library itself
has no dependencies.

While we are here, remove spaces in the ifeq clause, to match
the examples in the buildroot manual.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: select BR2_LEGACY for module-init-tools legacy option

Commit 94c72087f3 ("module-init-tools: remove package") removed the
module-init-tools package and therefore added the corresponding config
option in Config.in.legacy. However, the commit forgot to add the
"select BR2_LEGACY" that ensures the build cannot proceed until the
user has acknowledged the change (i.e kmod replacing
module-init-tools).

This commit adds this missing "select BR2_LEGACY".

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: remove the BR2_PACKAGE_QT_JAVASCRIPTCORE option

The BR2_PACKAGE_QT_JAVASCRIPTCORE option was available to force the
activation or disabling of the JIT compiler in the Qt Javascript
interpreter. However, the JIT compiler is not available for all
architectures, so forcing its activation does not always
work. Moreover, Qt knows by itself for which architectures JIT support
is possible, and will automatically enable it if possible.

Therefore, this option was in fact useless, and causing build problems
when enabled on architectures for which the JIT support was not
available. This commit removes this option and there is no
replacement: Qt will enable JIT at compile time when possible.

Fixes:

  http://autobuild.buildroot.org/results/aae/aaeb82753b7654eeca679ded5d0211ceebda3ea2/build-end.log
  http://autobuild.buildroot.org/results/367/3670e4f03ff0ce114c90bd7139243d82c427b52a/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc-snapshot: enable option UCLIBC_HAS_OBSTACK

Prior to uClibc commit f143f920694c, uClibc used to always include the
gnu obstack extension, which is used and required by many tools, such as
binutils.

Because of the change mentioned above, obstack is now optional, and got
disabled per default, so enable it in the uClibc snapshot configuration file.

Signed-off-by: Chris Zankel <chris@zankel.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

avr32: fix uclibc build using recent kernel headers

Using kernel headers newer than 3.6.x, uclibc 0.9.31.1 fails to build:

  In file included from output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:6,
                 from libc/inet/netlinkaccess.h:34,
                 from libc/inet/if_index.c:36:
  output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/if_link.h:314: error: expected specifier-qualifier-list before '__be16'
  make[1]: *** [libc/inet/if_index.os] Error 1
  make[1]: Leaving directory `output/build/uclibc-0.9.31.1'
  make: *** [output/build/uclibc-0.9.31.1/.stamp_built] Error 2

This patch adjusts the system type definitions in the netlinkaccess.h
header, updating the types to match those used in uClibc 0.9.33.2.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gutenprint: fix download url

Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openpgm: disable for AVR32, not its Buildroot-built toolchain

OpenPGM builds incorrectly on AVR32 with gcc-4.2.2-avr32-2.1.5.
Since it is presumed to be the only GCC version used by Buildroot
for AVR32, this patch disables openpgm for all cases when AVR32
is selected as the target architecture, including when a toolchain
is downloaded or preinstalled (this is what Buildroot autobuilders
do).

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dhcpcd: bump to version 6.1.0

Now has proper support for nommu and non-IPv6.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mplayer: disable for anything lower than ARMv5

Disable mplayer for anything lower than a v5 ARM core.
The support is broken and it's kind of pointless anyway. Fixes:
http://autobuild.buildroot.net/results/8f946e28b11b2ab1ba0d9688286c665488de0486/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

trivial: pcmanfm: fix typo in config help

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: reinstate support for version 0.9.31

This patch reinstates support for uClibc version 0.9.31, which was removed
from Buildroot in commit 8abb5b33c1aae035cf48b1c81104b433ff884c64

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openpgm: disable on AVR32

openpgm doesn't build correctly on AVR32 using
gcc-4.2.2-avr32-2.1.5 toolchain: it is configured to call
intrinsic atomic functions not provided by the toolchain,
so they are propagated as unresolved external symbols in the
built openpgm libraries. This breaks programs that try to link
openpgm, because they do not know where to get those either. For
instance, it breaks building zeromq tests when PGM support is
selected.

This commit disables openpgm on AVR32 due to apparent absence of
interest in this package on that architecture and it breaking too
many test builds.

Fixes http://autobuild.buildroot.net/results/5a3261109ea63ba17375003eabd8b5d88757865f/
(at least)

Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: fix out-of-tree builds with multiple targets with 'all'

For out-of-tree builds, this use-case fails to build:
    $ make clean all

This is because 'all' is filtered-out in the Makefile wrapper, since
the wrapper itself has a 'all' target.

The 'all' target is just the usual naming for the default target in a
Makefile. In fact, the first target is the default one, so we can name
it whatever we want.

Rename the Makefile wrapper 'all' target to avoid name-clashing.

Fixes #6644.

Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi: improve documentation

Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: further improvements for readability and
    completeness]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nut: new package

'nut' are the Network UPS Tools.

[Note: original patch from Dallas, but completely revamped
 by Yann, so nothing remains from the original patch, but two
 variable names.]

Signed-off-by: Dallas Clement <dallas.a.clement@gmail.com>
[yann.morin.1998@free.fr: refresh patch, use latest version,
    add license, fix commit message, add dependencies, fix
    runtime path, fix libs-config, move to 'system utils']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libevas: disable on avr32

Neither epoll_create1 nor inotify_init1 is available on avr32. Fixes build
failures such as the following.

  http://autobuild.buildroot.net/results/4d435a5fc608936362d605aca696c01023be9723

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: disable on avr32

The inotify_init1 syscall is not available on avr32. Fixes build failures
such as the following.

  http://autobuild.buildroot.net/results/0d8/0d8e7bd8bd3f227fabfb0d5feb59a5d316026d3f

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

avr32: pass target arch to gcc

As suggested by Alexander Lukichev and Thomas Petazzoni on the mailing list,
only one of the two avr32 microarchitectures is relevant for Buildroot:
avr32 Linux implies the avr32b microarchitecure, as used in the ap7000.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

aircrack-ng: add security patch for CVE-2010-1159

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

polarssl: bump to version 1.2.10

Fixes a memory leak in RSA blinding.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: minor fixes to S01logging bootscript

* The PID file is not created unless the '-m' option is passed to
  start-stop-daemon.

* Remove the mark '-m 0' option as it's not supported by busybox's
  syslogd.

* Syslogd and Klogd forks to background by default giving as a result
  that the pid stored in the PID file is not correct. Let the
  background job be done by 'start-stop-daemon' by passing '-n'
  (foreground) to the daemons and '-b' to start-stop-daemon. This
  way the pid stored in the PID files is correct.

Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

curl: fix homepage

cURL's homepage is curl.haxx.se and not curl.haxx.nu

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: security bump to version 1.8.11

Fixes CVE-2013-6336, CVE-2013-6337, CVE-2013-6338, CVE-2013-6339,
CVE-2013-6340, CVE-2013-4927, CVE-2013-4929, CVE-2013-4930,
CVE-2013-4931, CVE-2013-4932, CVE-2013-4933, CVE-2013-4934,
CVE-2013-4935, CVE-2013-5718, CVE-2013-5719, CVE-2013-5720,
CVE-2013-5721 and CVE-2013-5722.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nettle: disable openssl support for (unused) examples

Works around a linker issue when statically linking:

http://autobuild.buildroot.net/results/e3f43fed8f57c52e07e20055f11680f8200fb65e/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sqlcipher: fix download url

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dependencies.sh: update i386 package names

This is the list needed to run the Linaro pre-built toolchain
on a 64-bit Ubuntu 13.10 system.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zic: bump

This bump to allign with the tzdata bump in previous commit.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tzdata: bump

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-userland: bump

Fixes for camera features (exposure, capture loop, shutter speed),
h264 encoding headers, EXIF thumbnails.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-firmware: bump

Further fixes for de-interlacing.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/p1010rdb: bump to the latest and greatest versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/mpc8315erdb: bump to the latest and greatest versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/imx233_olinuxino: bump to the latest versions

Also tweak the kernel and buildroot config for basic WiFi support.
And fetch the ASoC patches for builtin audio.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu: bump relevant config versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

collectd: add option for sensors plugin

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dropwatch: fix avr32 build failure

On avr32, dropwatch needs libiberty to avoid build failures such as

  http://autobuild.buildroot.net/results/cd5/cd5e22fb5c9b0fc5d396bc85a5e253a1a65054da/

Also test built on ARM.

[Peter: pass TARGET_LDFLAGS as well, append -lintl in gettext case]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsigsegv: fix avr32 build

The libsigsegv configure step fails to correctly figure out the direction of
stack growth for avr32. This leads to a zero STACK_DIRECTION definition, and
build failures such as the following.

  http://autobuild.buildroot.net/results/a3fe938f9376533b4777d79deb7a2ee83ed5ce33

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump version to 3.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3. {2, 4, 10, 11}.x versions and add 3.12.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: don't allow building WebKit on some architectures

WebKit has some architecture specific support, and therefore is not
necessarily available for all architectures. Make sure the Qt WebKit
option cannot be selected on those architectures that are not
supported.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

omniorb: fix autobuilder failure

http://autobuild.buildroot.net/results/e3244abc550a95eb69e63b8db203f39b27f3288e/

Turns out omniorb isn't building because of an old cross compile patch.
The last patchset was missing the delete.

Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sqlite: Disable dynamic extention if static library is seleted

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netperf: enable demo mode

Enable demo mode for netperf to activates a global "-D" <interval> option.
This option will display interim results at least every time interval.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libvpx: needs thread support

Fixes:

  http://autobuild.buildroot.org/results/8de/8def7e54e4fecb7df350443824c00b53d1c61c01/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>

dhcpcd: needs MMU

dhcpcd fails to build on non-MMU platforms, even with the
--disable-fork option:

  bind.o: In function `_daemonise':
  bind.c:(.text+0x62): undefined reference to `_fork'
  collect2: ld returned 1 exit status

Therefore, we make dhcpcd depend on MMU support, and remove the
non-MMU condition in the .mk file. More recent versions of dhcpcd do
support non-MMU properly, but this commit intends to be only a fix.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>

libnl: do not allow to build tools on static lib configs

Building the libnl tools requires the <dlfcn.h> header, which is not
compatible with static only builds. Therefore, this commit makes the
libnl tools option depend on !BR2_PREFER_STATIC_LIB.

Fixes:

   http://autobuild.buildroot.org/results/573/57340b9bd2db3a523836e02e01cba6f7c17c8ca7/build-end.log

[Peter: fix tools comment dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>

libnl: simplify makefile by using --{enable, disable}-cli

The libnl configure script has a --{enable,disable}-cli options that
allows to enable or disable the compilation of the libnl tools. Use
this option instead of compiling everything and then removing the
installed programs.

Note that we also get rid of the uninstall command, which is planned
to be globally removed in Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>

libcap: fix static link

With BR2_PREFER_STATIC_LIB, libcap fails to build:

  http://autobuild.buildroot.net/results/619bceb3491ecd2ed4e1ae552fdb237a0ed2fa47/build-end.log

This is due to the fact that it still tries to build a shared
library. This commit fixes that by adding a patch that makes libcap
provide install-shared/install-static targets. We also now only build
the $(@D)/libcap subdirectory, so removing the build of the progs
subdirectory is no longer needed.

[Peter: fixup description]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcap: rename existing patch

libcap currently has one patch, but it is named using the old naming
strategy, which includes the package version, but not a patch
number. This commit switches this to use the new patch naming
strategy.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>

cryptsetup: Add libintl for UCLIBC toolchain

Fixes autobuild error
http://autobuild.buildroot.net/results/cc1a65b9554bc2ece1b3ea8b51cd805b9bda7e86/

Adding libintl to the libraries list for cryptsetup when using a
uclibc toolchain and locale support is enabled.

Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ngrep: fix static linking issue with libpcre

Adding -lpcre in LDFLAGS place the library before object files:
gcc ... -lpcre -L.../sysroot/usr/lib -s -o ngrep ngrep.o -lpcap

Makefile.in is patched to use @LIBS@ for adding -lpcre in the right place.

Fixes:
http://autobuild.buildroot.net/results/684/684a3bed28d13ef5e5156257aade3b9aff32f180

[Peter: fixup patch description]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ngrep: rename existing patch

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: cleanup github <pkg>{_VERSION, _SOURCE, _SITE} variable

According to the documentation, chapter
6.2.8.2 How to add a package from github
"
[...]
FOO_VERSION = tag or full commit ID
FOO_SITE = http://github.com/<user>/<package>/tarball/$(FOO_VERSION)
[...]
- The tarball name generated by github matches the default one from
  Buildroot (...),
  so it is not necessary to specify it in the +.mk+ file.
"
This commit makes the appropriate changes.

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

git packages: use full revision hash

There is no benefit in using the shortened git revision hash. On the
contrary: the shorter the hash, the higher the risk of having collisions
with another commit.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: github commits should be specified in full

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uboot-tools: fix license issues

Fix license directory and filename change, fixes:
http://autobuild.buildroot.net/results/8c9/8c94c81fe74399c854de335329cf4942f8356fbe/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rsync: use system zlib and popt, also do not lose debug options

rsync by default compiles statically its own zlib and popt
libraries, it is better to use system wide libraries instead -
both for disk and memory consumption. Change rsync package
accordingly.

Also previously a debug configure option has been lost, as
overwritten by '--with-included-popt' option - fixed.

For example, on ARMv5 rsync binary size is reduced by about 25%.

Signed-off-by: Denis Mingulov <denis@mingulov.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: customize-toolchain.txt: update internal backend section

Mention all supported C libraries by the internal Buildroot toolchain
backend.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: developer-guide.txt: cleanup non-existing source

[Thomas: Added ThomasDS Acked-by, which was given on an earlier
version of the same patch.]

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>

support: trivial fixes (typos and minor rewording) in gen-manual-lists.py

[Thomas: added Thomas DS Acked-by, given at
http://patchwork.ozlabs.org/patch/284719/, and made the additional
typo fixes suggested by Thomas DS.]

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>

manual generation: rename manual-txt into manual-text

The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual generation: check dependencies first

To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cppzmq/czmq: Update comment for needs threads support

Comment 7e37d235f "zeromq: needs threads" adds BR2_TOOLCHAIN_HAS_THREADS
dependency but forgot to add corresponding comment for cppzmq and czmq. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sysvinit: install new cmds and fix inittab

Adding support for sysvinit to install reboot, poweroff, and pidof
commands available in /sbin.

Fixes bug #6620

Removed uninstall commands since they aren't used.

There is an error with sysvinit that will prevent the system from booting
if "dshm::sysinit:/bin/mkdir -p /dev/shm" is not present in the inittab.

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xenomai: use install-user to remove patch

As noted by "George" in bug #6416, the xenomai-do-not-install-devices
patch is not needed, since Xenomai provides a "install-user" target to
only install the libraries/headers and not the device files. This
patch changes xenomai.mk to use 'install-user' and removes the useless
patch.

Fixes bug #6416.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>