toolchain-external: update Arm AArch64-BE toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: update Arm AArch64 toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_aarch64_virt_defconfig.

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain-external: update Arm ARM toolchain 8.3-2019.03

Update to gcc 8.3, gdb 8.2, binutils 2.32. Revert to linux kernel
headers 4.19 instead of 5.1-rc1 [1].

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_arm_vexpress_defconfig.

[1] https://bugs.linaro.org/show_bug.cgi?id=4297

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: fix IPUTILS_PERMISSIONS

The IPUTILS_PERMISSIONS variable was wrong, because iputils installs
its programs in /usr/bin, not in /bin. It probably was only tested
with the merged /usr option enabled.

This commit fixes IPUTILS_PERMISSIONS, taking into account the change
done in 6e18892733 "package/iputils: move binaries to the location also
used by Busybox":

 - arping is moved by the post-install target hook to /usr/sbin

 - clockdiff is installed by iputils in /usr/bin

 - ping is moved by the post-install target hook to /bin, which makes
   the previously incorrect path in IPUTILS_PERMISSIONS now correct

Fixes:

  http://autobuild.buildroot.net/results/fe378bca29c86a681ba9ad40386cb89248195c50/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: move binaries to the location also used by Busybox

iputils installs several programs that are also implemented as applets
in Busybox. Two of these (arping and tftpd) are installed by iputils
in /bin, while Busybox installs them in /usr/sbin, causing both to be
present if both iputils and busybox are enabled.

This commit moves the binaries installed by iputils to /usr/sbin, so
that only these are installed (Busybox will be installed later thanks
to its optional dependency on iputils, but it will not override the
tools installed by iputils).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: add option to enable systemd-journal-remote

systemd-journal-remote was added in systemd v211, so add a new option
to enable or disable it.

Signed-off-by: Yi Zheng <goodmenzy@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: remove bindir prefix from gio-2.0.pc

Apply LIBGLIB2_REMOVE_BINDIR_PREFIX_FROM_PC_FILE to gio-2.0.pc so
${bindir} prefix is also removed for gbus-codegen otherwise build of
packages using this binary will fail if gbus-codegen is not installed on
host

Fixes:
 - http://autobuild.buildroot.org/results/5c0e4f3d33e01198688d58388aabe159bd005234

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8mmevk: new defconfig

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongoose: bump to version 6.15

See https://github.com/cesanta/mongoose/releases/tag/6.15

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: add upstream security fix for CVE-2019-10160

Fixes CVE-2019-10160: urlsplit does not handle NFKC normalization (2nd fix)

While the fix for CVE-2019-9936 is included in 3.7.3, the followup
regression fixes unfortunatly aren't.

https://bugs.python.org/issue36742

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python: add upstream security fix for CVE-2019-9636

Fixes CVE-2019-9636: urlsplit does not handle NFKC normalization

https://bugs.python.org/issue36216

The fix unfortunately introduced regressions, so also apply the followup
fixes.

https://bugs.python.org/issue36742

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python: add upstream security fix for CVE-2019-9948

Fixes CVE-2019-9948: Unnecessary URL scheme exists to allow file:// reading
file in urllib.

https://bugs.python.org/issue35907

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireguard: bump version to 0.0.20190601

For details of the changes, see the announcement:
https://lists.zx2c4.com/pipermail/wireguard/2019-June/004196.html

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapro: bump Linux to 5.1.1

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: disable for nds32

There is no support for nds32 in gdb.

Fixes:
  http://autobuild.buildroot.net/results/1a40b1ac5f06c856c2e30dbbb4e485022c438c72

Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsocketcan: add license file details

Add LICENSE file

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsocketcan: bump to version 0.0.11

This includes the following changes:

0ff01ae v0.0.11
b217774 Add configure switch for error logging
15af38a Add compile option to disable error logging
9679a3f Add interface to retrieve link statistics
6f13cef Get link information only from specified interface
f5392c3 Fix parse_rtattr() does not completely initialize
4ea9ec7 Update can_set_ctrlmode() documentation
5938ac7 Update CAN netlink header
0c91940 GNUmakefile: include LICENSE file in tarball
4608afb configure: back to trunk

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/waylandpp: bump version

Removed patch applied upstream:
https://github.com/NilsBrause/waylandpp/commit/242c2c9a188b1a972978fc05dbe70d102bc7c4e1

Bundled pugixml was removed:
https://github.com/NilsBrause/waylandpp/commit/433ce65b681c27d54e1e6b9a602f1c8291aabd54

Use host-pugixml instead and bump to HEAD to include a patch which
fixes a linking error:
https://github.com/NilsBrause/waylandpp/commit/41063c3e1de245bb7ea0c940e7400bd876bee25e

Updated license hash due to upstream commit:
https://github.com/NilsBrause/waylandpp/commit/f255d61ffd982614c0659be1742383dab06710a2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pugixml: enable host build

Needed for host-waylandpp >= 0.2.5
https://github.com/NilsBrause/waylandpp/commit/433ce65b681c27d54e1e6b9a602f1c8291aabd54

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: enable host build

Host version of flatc compiler is needed for Kodi 18.x:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindFlatBuffers.cmake#L51

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: bump version to v1.11.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.{0, 1}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: bump to version 0.51.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dbus: security bump to version 1.12.16

Fixes the following security issues:

- CVE-2019-12749: Do not attempt to carry out DBUS_COOKIE_SHA1
  authentication for identities that differ from the user running the
  DBusServer.  Previously, a local attacker could manipulate symbolic links
  in their own home directory to bypass authentication and connect to a
  DBusServer with elevated privileges.  The standard system and session
  dbus-daemons in their default configuration were immune to this attack
  because they did not allow DBUS_COOKIE_SHA1, but third-party users of
  DBusServer such as Upstart could be vulnerable.  Thanks to Joe Vennix of
  Apple Information Security.

  For details, see the advisory:
  https://www.openwall.com/lists/oss-security/2019/06/11/2

Also contains a number of other smaller fixes, including fixes for memory
leaks.  For details, see NEWS:

https://gitlab.freedesktop.org/dbus/dbus/blob/dbus-1.12/NEWS

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openblas: Handle new westmere target architecture

Nehalem, the predecessor to westmere, is best match for westmere
architecture in current openblas.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch: Add support for Westmere targets

The westmere line of x86_64 targets lies between nehalem (corei7) and
sandybridge (corei7-avx).  Allowing use of -march=westmere enables use of
AES instruction set on these targets.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mariadb: security bump to version 10.3.15

The licensing text in README.md has changed slightly. The reference to
COPYING.LESSER has been removed. The file itself has been gone for awhile
now. COPYING.thirdparty has also been renamed to THIRDPARTY.

Release notes:
https://mariadb.com/kb/en/library/mariadb-10315-release-notes/

Changelog:
https://mariadb.com/kb/en/mariadb-10315-changelog/

Fixes the following security vulnerabilities:

CVE-2019-2614 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Replication). Supported versions that are affected
are 5.6.43 and prior, 5.7.25 and prior and 8.0.15 and prior. Difficult to
exploit vulnerability allows high privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.

CVE-2019-2627 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Security: Privileges). Supported versions that are
affected are 5.6.43 and prior, 5.7.25 and prior and 8.0.15 and prior.
Easily exploitable vulnerability allows high privileged attacker with
network access via multiple protocols to compromise MySQL Server.
Successful attacks of this vulnerability can result in unauthorized ability
to cause a hang or frequently repeatable crash (complete DOS) of MySQL
Server.

CVE-2019-2628 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.25 and
prior and 8.0.15 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can
result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.

Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freeswitch: add optional support for libopenh264

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freeswitch: bump version to 1.8.6

Updated license hash after upstream commit
https://freeswitch.org/stash/projects/FS/repos/freeswitch/commits/a1f3b4862e7fd44a37862ae84c0e79f89c9bc0d8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/git: fix build with curl

curl-config path can be set through ac_cv_prog_CURL_CONFIG and not
ac_cv_prog_curl_config

Fixes:
 - http://autobuild.buildroot.org/results/4b22f761795d8760dac6ddfd40934259f0135a4d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rauc: add license file details

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rauc: bump to version 1.1

See: https://github.com/rauc/rauc/releases/tag/v1.1

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-psutil: bump to version 5.6.3

License update: change phrasing for Github to recognize
it's BSD-3-Clause.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-paramiko: bump to version 2.5.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-lxml: bump to version 4.3.4

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/vlc: bump version to 3.0.7

Removed patch 0010, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libglib2: bump to version 2.60.3

Changes include:
  - Change the package type to meson, as autoconf is no longer supported.

  - Add 0002-add-option-to-build-tests.patch
      Upstream won't build tests when cross-compiling. However; this means still
      building the tests during a host build. Building the tests causes build
      failures on older distributions such as CentOS 6 and Debian 7 because of
      the command `objcopy --add-symbol` is used when building the test
      "test_resources2," which is not available with the older version of
      objcopy provided by the distributions.

  - Add 0003-remove-cpp-requirement.patch:
     C++ is not needed when just compiling. The inclusion of C++ in meson.build
     is to ensure libglib doesn't accidentally use C++ reserved keywords in
     public headers. Because tests aren't being compiled, there is no need for
     C++ as a requirement.
     (https://gitlab.gnome.org/GNOME/glib/issues/1748)

  - Add 0004-Add-Wno-format-nonliteral-to-compiler-arguments.patch:
    This prevents a false error when compiling against older gcc versions.
    (https://gitlab.gnome.org/GNOME/glib/issues/1744)

  - Remove 0004-Do-not-hardcode-python-path-into-various-tools.patch:
      The switch to meson makes this obsolete.

  - Remove LIBGLIB2_AUTORECONF = YES from libglib2.mk:
      Now that libglib2 is a meson package, there is no need for AUTORECONF.

  - Remove LIBGLIB2_INSTALL_STAGING_OPTS from libglib2.mk:
      Meson resolves these correctly.

  - Add LIBGLIB2_REMOVE_BINDIR_PREFIX_FROM_PC_FILE in libglib2.mk:
      Newer versions of libglib2 prefix glib-genmarshal, gobject-query, and
      glib-mkenums with ${bindir}. Unfortunately, this will resolve to the host
      systems /bin/ directory, which will cause compilation issues if the host
      does not have these programs. By removing the ${bindir}/ prefix, these
      programs are resolved in PATH instead.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mdadm: bump to version 4.1

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mdadm: fix patch number

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/git: bump to version 2.22.0

Remove patch with NLS fix because it is was added into latest version.

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/poppler: needs wchar

Fixes:
 - http://autobuild.buildroot.org/results/2c8695b75c3241359e739d88726430cbfe47a5bd

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gerbera: add upstream patch to fix find_program with taglib-config

Add an from from upstream to fix linking Gerbera with taglib. The patch
fixes the following issue:

When cross-compiling CMakes `find_program()` will search for binaries on the
host. This is typically correct, e.g. when search for compilers or shells.

When cross-compiling, searching for `taglib-config` using `find_program` should
not find the binary on the host, instead it should find the binary in the sysroot
directory, as the host `taglib-config` will output the wrong host paths
and libs, whereas the sysroot `taglib-config` will output the correct sysroot
paths and libs.

Therefore, use the `CMAKE_FIND_ROOT_PATH_MODE_PROGRAM` variable when
cross-compiling. This variable controls whether the `CMAKE_FIND_ROOT_PATH`
and `CMAKE_SYSROOT` are used by find_program().

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/taglib: add upstream patch to fix taglib-config

The current taglib-config program does not work when cross-compiling as it only
returns paths to the host, which breaks building programs which link against
taglib.

For example gerbera uses `taglib-config` and it fails with:

```
[..]
-- Found TagLib: -L/usr/lib -ltag
[..]
arm-linux-gnueabihf-g++: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/lib'
```

Before the patch the output of `taglib-config` is:
```
$ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs
-L/usr/lib -ltag
```

Add a patch from upstream which fixes taglib-config.

After applying the fix, the pkg-config file is correct:
```
$ ./output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/bin/taglib-config --libs
-L/home/joerg/Development/git/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib -ltag
```

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/swupdate: bump to version 2019.04

New features in this release:
 - Improved documentation
 - delta updates based on rdiff library
 - support for libubootenv
 - dry-run option
 - CA certificates for signed images
 - Fix security leak in parser

This commit also:
 - introduce BR2_PACKAGE_LIBRSYNC for 'rdiff' Handler. No HAVE_* is
   needed, it just declares the functions locally and links with
   -lrsync.
 - introduce BR2_PACKAGE_LIBUBOOTENV
 - drop upstreamed patch
 - backport upstream patches (important fix)
 - regenerate the default swupdate.config. Now CONFIG_GUNZIP is always
   enabled because gunzip is provided by the default busybox config.

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Arnout: don't mention ZLIB in help text for libubootenv, since it is
 select'ed by libubootenv.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/imx7dpico: Add Wifi support

imx7dpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/imx7dpico: Bump Linux and U-Boot

Bump Linux to 5.1 and U-Boot to version 2019.01.

U-Boot patch is no longer needed, applied upstream.

U-Boot defconfig name for this board has changed to pico-pi-imx7d.

U-Boot now supports distrobootcmd for this board, so add the appropriate
extlinux.conf and use SPL+u-boot.img instead of u-boot.imx. Note that
the common freescale post-image script handles things appropriately
based on the selected options in .config.

dosfstools and mtools are no longer needed to build the image.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Arnout: remove BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

boards/freescale/common: Introduce genimage.cfg.template_no_boot_part_spl

Modern U-Boot assumes a layout where the first partition is an ext2 and
the kernel and dtb can be found in /boot. In other words, a layout
without boot partition.

Add a genimage.cfg template for the freescale defconfigs with such a
layout.

For now, only the layout with SPL+u-boot.img is added. It's unlikely that
the u-boot.imx approach will be used.

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/weston: drop unneeded first patch

Patch is not needed since
https://gitlab.freedesktop.org/wayland/weston/commit/32838c93a509dbeda717e58279683c63a34a2e07

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pkg-golang: do not set static linking for host target

The current logic will set the "-static" flag when building go
host packages if BR2_STATIC_LIBS is set, this will not work as
there is no support to link host packages statically.

Fix this by applying this logic only for target builds.

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/imx8mmpico: new defconfig

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

board/freescale/common/imx: add support for i.MX8MM

For the boot image creation for the i.MX8MM, the main differences with
i.MX8M are that there is no HDMI firmware image passed, and the ATF
load address is different.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/imx-mkimage: add support for i.MX8MM

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/freescale-imx/firmware-imx: add support for i.MX8MM

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/freescale-imx: add option for i.MX8MM

The i.MX8MMini is slightly different from the i.MX8M. The main
difference of interrest here is that the i.MX8MMini has no HDMI
support. The firmware blobs must not include the HDMI signed firmware,
which is why we need this new configuration option.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/weston: fix build with headers < 4.4

weston includes input-event-codes.h since version 5.0.91 and
https://github.com/wayland-project/weston/commit/6e229ca26381bc8191fd9af1e439c311da709aff

input-event-codes.h is available only since kernel 4.4 and
https://github.com/torvalds/linux/commit/f902dd893427eade90f7eaf858e5ff8b150a5a12

To fix this build failure, replace include on linux/input-event-codes.h
by linux/input.h

Fixes:
 - http://autobuild.buildroot.org/results/210c2759900f15ea0030d088f6f45cd8bb199b29

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

docs: use-case for un-ignoring VCS directories and overridden source dir

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes: a27078d32d Allow overriding the VCS exclude list with *_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/openjdk: set PATH before calling make

PATH must be set to $(BR_PATH) thanks to $(TARGET_MAKE_ENV) before
calling make otherwise build fails on:
/bin/bash: gawk: command not found

When build fails, config.log contains the following line:

configure:13709: checking for gawk
configure:13725: found /home/buildroot/autobuild/run/instance-3/output/host/bin/gawk
configure:13736: result: gawk
[...]
ac_cv_prog_AWK=gawk

Fixes:
 - http://autobuild.buildroot.org/results/43c5d08f599e8f44b59a576d243ae1c7b27de7a3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

manual/contribute.txt: fix typo

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/ncmpc: fix build without NLS

The build fails if libintl.h is found but xgettext is not available:

Has header "libintl.h" : YES
Library intl found: NO

po/meson.build:28:5: ERROR: Can not do gettext because xgettext is not installed.

This is because enable_nls defaults to true if libintl.h is found. Use
the nls option to enable/disable NLS explicitly, depending on
BR2_SYSTEM_ENABLE_NLS,

Also, fix the second patch to always look for libintl, even if NLS is
not enabled. The enable_nls option disables processing the po files, but
the gettext calls in the source are still there, so we need to link with
libintl anyway.

Fixes:
 - http://autobuild.buildroot.org/results/0ab0a42fd4c5c9fd5891f3b84287bd788f763ba4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/openzwave: needs NPTL

openzwave needs pthread_setname_np

Fixes:
 - http://autobuild.buildroot.org/results/d50a79384eb346078fd83ad3a1ba8b8a04cc4d53

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libgit2: security bump to version 0.27.8

Fixing the following list of issues (fixed in 0.27.6 and 0.27.5):

    The function family git__strtol is used to parse integers
    from a buffer. As the functions do not take a buffer length as
    argument, they will scan either until the end of the current
    number or until a NUL byte is encountered. Many callers have
    been misusing the function and called it on potentially
    non-NUL-terminated buffers, resulting in possible out-of-bounds
    reads. Callers have been fixed to use git__strntol functions
    instead and git__strtol functions were removed.

    The function git__strntol64 relied on the undefined behavior
    of signed integer overflows. While the code tried to detect
    such overflows after they have happened, this is unspecified
    behavior and may lead to weird behavior on uncommon platforms.

    In the case where git__strntol32 was unable to parse an
    integer because it doesn't fit into an int32_t, it printed an
    error message containing the string that is currently being
    parsed. The code didn't truncate the string though, which
    caused it to print the complete string until a NUL byte is
    encountered and not only the currently parsed number. In case
    where the string was not NUL terminated, this could have lead
    to an out-of-bounds read.

    When parsing tags, all unknown fields that appear before the
    tag message are skipped. This skipping is done by using a plain
    strstr(buffer, "\n\n") to search for the two newlines that
    separate tag fields from tag message. As it is not possible to
    supply a buffer length to strstr, this call may skip over the
    buffer's end and thus result in an out of bounds read. As
    strstr may return a pointer that is out of bounds, the
    following computation of buffer_end - buffer will overflow
    and result in an allocation of an invalid length. Note that
    when reading objects from the object database, we make sure to
    always NUL terminate them, making the use of strstr safe.

    When parsing the "encoding" field of a commit, we may perform
    an out of bounds read due to using git__prefixcmp instead of
    git__prefixncmp. This can result in the parsed commit object
    containing uninitialized data in both its message encoding and
    message fields. Note that when reading objects from the object
    database, we make sure to always NUL terminate them, making the
    use of strstr safe.

    Submodule URLs and paths with a leading "-" are now ignored.
    This is due to the recently discovered CVE-2018-17456, which
    can lead to arbitrary code execution in upstream git. While
    libgit2 itself is not vulnerable, it can be used to inject
    options in an implementation which performs a recursive clone
    by executing an external command.

    When running repack while doing repo writes,
    packfile_load__cb() could see some temporary files in the
    directory that were bigger than the usual, and makes memcmp
    overflow on the p->pack_name string. This issue was reported
    and fixed by bisho.

    The configuration file parser used unbounded recursion to parse
    multiline variables, which could lead to a stack overflow. The
    issue was reported by the oss-fuzz project, issue 10048 and
    fixed by Nelson Elhage.

    The fix to the unbounded recursion introduced a memory leak in
    the config parser. While this leak was never in a public
    release, the oss-fuzz project reported this as issue 10127. The
    fix was implemented by Nelson Elhage and Patrick Steinhardt.

    When parsing "ok" packets received via the smart protocol, our
    parsing code did not correctly verify the bounds of the
    packets, which could result in a heap-buffer overflow. The
    issue was reported by the oss-fuzz project, issue 9749 and
    fixed by Patrick Steinhardt.

    The parsing code for the smart protocol has been tightened in
    general, fixing heap-buffer overflows when parsing the packet
    type as well as for "ACK" and "unpack" packets. The issue was
    discovered and fixed by Patrick Steinhardt.

    Fixed potential integer overflows on platforms with 16 bit
    integers when parsing packets for the smart protocol. The issue
    was discovered and fixed by Patrick Steinhardt.

    Fixed potential NULL pointer dereference when parsing
    configuration files which have "include.path" or
    "includeIf..path" statements without a value.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/samba4: drop third patch

Drop third patch which is not upstreamable and set XSLTPROC to false
instead to disable documentation

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/perl-www-form-urlencoded: bump to version 0.26

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/perl-net-http: bump to version 6.19

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/perl-libwww-perl: bump to version 6.39

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/perl-date-manip: bump to version 6.77

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/perl-cookie-baker: bump to version 0.11

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

mender-grubenv: new package

Mender-grubenv contains the boot scripts and tools used by Mender to
integrate with the Grub2 bootloader.

The user must select the following Grub modules for this package:
loadenv, hashsum, echo, halt, gcry_sha256, and test.

Because this patch also includes a grub version of fw_printenv and fw_setenv,
package/mender/Config.in must be changed as well at the same time, because if
both uboot-tools and this package are selected, during startup, mender calls
the uboot-tools version of fw_printenv and fails to start.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Mirza Krak <mirza.krak@northern.tech>
[Arnout:
 - reorder depends clauses;
 - add runtime tag to grub2 dependency
 - remove wchar dependency from comment
 - only error if BR_BUILDING
 - use install instead of cp for a single file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

iputils: set the permissions with IPUTILS_PERMISSIONS

... for arping, clockdiff and ping. These require root permission for
socket(). Upstream solution (script setcap-setuid.sh) requires
setcap binary on the host and cap_net_raw+ep + libcap, or setting
setuid root executable (which is dangerous). Neither would work anyway
since we install as non-root user.

This restores behavior used for version s20180629. We used to setuid the
ping and traceroute6 programs. traceroute6 is no longer built since the
bump to s20190515, but now arping and clockdiff are built, and these
need setuid as well. So enable setuid on arping, clockdiff and ping.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/collectd: add write_redis support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/collectd: add redis support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Allow overriding the VCS exclude list with *_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS

We have some internal packages which automatically bake a version string
from the git checkout, and we usually combine these with a
*_OVERRIDE_SRCDIR. I would like to let Buildroot *not* skip the .git
directory when picking up sources from the local checkout.  It turns out
that the existing mechanism (*_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS) only
supports adding to the exclude list because `rsync` simply uses the
first match from the provided filtering rules.

Solve this by using the user-provided values first. If they match, then
`rsync` won't exclude stuff based on the generic VCS exclude patterns.

Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/collectd: add amqp support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/samba4: drop unneeded second patch

This patch is not needed since version 4.9.0 and
https://github.com/samba-team/samba/commit/859698d29b547217356851094ed8188236e717b6
which solved the issue by avoiding calling this function.

Also renumber the remaining patches.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gpsd: fix isync build without nmea

Upstream suggested to move the definition of NMEA_DOLLAR out of the
ifdef.

Fixes:
 - http://autobuild.buildroot.org/results/7757ff82623eb5db8cbd9cdf69baf308fd0b0666

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/luarocks: fix test file creation on br-external

first, add the creation of the needed subdirectories

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

utils/scancpan: fix test file creation on br-external

first, add the creation of the needed subdirectories

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: fix build without setcap

Fixes:
 - http://autobuild.buildroot.org/results/711718ecf20d6cc28953e089a6e5516cfb4b9031

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: fix license

- Replace nfinfod/COPYING by LICENSE, Documentation/LICENSE.BSD3 and
  Documentation/LICENSE.GPL2 which are available since version s20180629
  and
  https://github.com/iputils/iputils/commit/686ee13130550aa4cb2937842504b2131f0934c6
- BSD-4-Clause has been removed since version s20180629 and
  https://github.com/iputils/iputils/commit/f69eeac80de413248fd3d7d4d4244af22a81e055

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/0a8a3efe734ac7fb3a68ba505277681857dc0a3d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: fix IDN support

iputils depends on libidn2 since version s20180629 and
https://github.com/iputils/iputils/commit/665fe4d30ff8b6649454ae25e4768b2f23605332

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/poppler: needs dynamic library

Fixes:
 - http://autobuild.buildroot.org/results/e409863724005a0c182476612187a322a16a7db8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libevent: fix build with openssl

Since bump to version 2.1.10 in commit
3c8e79db8375f83a8e6a1d58ade697447903b6b0, openssl detection is broken.
Add a patch to fix it otherwise libwebsock fails to build

Fixes:
 - http://autobuild.buildroot.org/results/be32afa364a6b387195cdb5166fb23e9610451a7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/poppler: use THREAD_PTHREAD_ARG=OFF

As noted by Fabrice, all other packages that show CMake's FindThreads
issue fix it by setting THREAD_PTHREAD_ARG=OFF instead of setting
THREAD_HAVE_PTHREAD_ARG=ON. So, for consistency, do the same for
poppler.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

linux/linux-ext-xenomai: add check-package exclusion comment

check-package wrongly warns against LINUX_EXTRA_DOWNLOADS var:

 linux/linux-ext-xenomai.mk:15: possible typo: LINUX_EXTRA_DOWNLOADS -> *XENOMAI*
 34 lines processed
 1 warnings generated

Add a TypoInPackageVariable exclusion comment to remove this warning.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

utils/genrandconfing: randomly enable BR2_REPRODUCIBLE 10% of the times

Initial patch to start reproducibility testing.

Also enable tar filesystem to compare images since diffoscope works well
with tar.

Signed-off-by: Atharva Lele <itsatharva@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gstreamer1/gst1-plugins-bad: add wpe plugin option

Removed gst1-plugins-bad dependency from wpewebkit gstreamer-gl option
so that there isn't a circular dependency with gst1-plugins-bad.

It appears that wpewebkit gstreamer-gl only has a runtime dependency on
gst1-plugins-bad.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/iputils: fix static build with gcrypt

Fixes:
 - http://autobuild.buildroot.net/results/fb698e3e903869978bd5e69d791ec362317b7981

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mpd: fix static build with tremor and vorbis

mpd can't be built statically with tremor and vorbis, build fails on:
block.c:(.text+0x11c): multiple definition of `vorbis_block_init'
/usr/lfs/v0/rc-buildroot-test/scripts/instance-2/output/host/bin/../sparc-buildroot-linux-uclibc/sysroot/usr/lib/libvorbisidec.a(block.o):block.c:(.text+0x0): first defined here
/usr/lfs/v0/rc-buildroot-test/scripts/instance-2/output/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/7.4.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: Disabling relaxation: it will not work with multiple definitions
/usr/lfs/v0/rc-buildroot-test/scripts/instance-2/output/host/bin/../sparc-buildroot-linux-uclibc/sysroot/usr/lib/libvorbis.a(block.o): In function `_vorbis_block_alloc':

Fix this by making both options mutually exclusive

It should be noted that upstream explicitly removed the possibility to
enable tremor and vorbis at the same time since version 0.21.6 and
https://github.com/MusicPlayerDaemon/MPD/commit/c18cd941aaa4c16ac713bc4f1e16ada5281d689e
Since we only have 0.20.23, it is still possible to build them together,
but there is clearly no need to allow it.

Fixes:
 - http://autobuild.buildroot.org/results/60c721a82ffd668bebf02d80bca83780d6cdb2f2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mpd: drop tremor select

Drop tremor select added by commit
d428dddf680b067c13ba9a08bfd502c7286cffe7

Indeed, nowadays, mpd can be built successfully even if there is no
input plugin selected.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/opencv3: objdetect needs calib3d

objdetect needs calib3d since version 3.4.4 and
https://github.com/opencv/opencv/commit/53ec8f286b7d475fa5a799023595bd4dc73e5c81

Fixes:
 - http://autobuild.buildroot.org/results/37d0a5ba57de4c52b6e0ec99aedaca71f3397fbb

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/poppler: add missing end-of-line backslash

Commit c6bef18dab5d "bump version to 0.77.0" converted the
POPPLER_CONF_OPTS variable to one entry per line, but a backslash was
forgotten at the end of one of the lines. Thus, the last bit of the
configuration options weren't applied.

Fortunately, all of those were alread at their default value, so not
much was lost.

It does fix a check-package warning though:
package/poppler/poppler.mk:17: unexpected indent with tabs

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/pkg-golang: add cflags/ldflags to GO_HOST_ENV

If a go host package is built using cgo, it needs access
to HOST_CFLAGS/HOST_LDFLAGS to utilize host packages it
might depend on.

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/poppler: fix build with cmake < 3.10

poppler requires threads, and our compiler always accepts the -pthread
argument, so THREADS_HAVE_PTHREAD_ARG can safely be set to ON.

Fixes:
 - http://autobuild.buildroot.org/results/f9e24d38d3aa4519615c5a0ae7f62af610df976f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Arnout: set THREADS_HAVE_PTHREAD_ARG instead of THREADS_PTHREAD_ARG,
and set it to ON instead of OFF because we always have threads.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/openzwave: needs dynamic library

openzwave always builds and installs a dynamic library, so add a
dependency to !BR2_STATIC_LIBS. domoticz is the only package that uses
openzwave and it already depends on !BR2_STATIC_LIBS.

This behavior has not changed from 1.5 to 1.6 even if there is only a
build failure with 1.6.

Fixes:
 - http://autobuild.buildroot.org/results/f6c8c4072b2cd5b6e9aa548f41ab000e152f1add

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/grpc: fix build with uclibc on x86_64

On x86_64 if GPR_MUSL_LIBC_COMPAT is not set, grpc tries to link with
memcpy@GLIBC_2.2.5, see:
https://github.com/grpc/grpc/blob/618a3f561d4a93f263cca23abad086ed8f4d5e86/src/core/lib/gpr/wrap_memcpy.cc

Add a new GPR_DISABLE_WRAPPED_MEMCPY to disable wrapped memory without
changing CPU behavior

Fixes:
 - http://autobuild.buildroot.org/results/20d6f2489a4e291a53bd514da66105eb607e1014

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libva: fix build with gcc < 5

Fixes:
 - http://autobuild.buildroot.org/results/96fe1667190e1e08d672984f147ec8e8f5e2f4f1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Ivan Bagarolo <ivan.bagarolo@micronovasrl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gstreamer1/gst1-plugins-bad: bluez-plugin depends on bluez5_utils

autotools doesn't throw an error if bluez_utils is found and is older than
version 5. It just doesn't build the plugin. As such, select bluez5_utils
instead. This was found with the meson conversion, because meson does
throw an error.

All dependencies of bluez5_utils are added, though some of them are
already implicit by gstreamer1 itself. This simplifies things if the
dependencies change in the future (suggested by Thomas).

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Arnout: add bluez5_utils comment to dependencies, extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/libubootenv: fix build with 'nothread' toolchain

<pthread.h> include doesn't seem to be necessary inside the library.
So, drop the header completely.

Fixes:
 - http://autobuild.buildroot.org/results/813e8951530c093f46b38bf8c3b467ab6535c95b

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/exiv2: cleanup options and licenses

exiv2 no longer requires a non commercial option for lens database
integration since version 0.27. See [1] and [2]

The BR2_PACKAGE_EXIV2_LENSDATA option is maintained because the
src/nikonmn_int.cpp file always specifies that the Nikon lens name
database is free to use in non-commercial, GPL or open source software
only.

Legacy handling for the removed option COMMERCIAL is not needed, since
now it's always enabled.

Add the dedicated BSD-3-Clause license file for CMakeLists.txt,
config/FindEXPAT.cmake and config/FindMSGFMT.cmake files.

[1] https://github.com/Exiv2/exiv2/commit/07f63003b7f50dd7d8719585ba54623e0f60c3c4
[2] https://github.com/Exiv2/exiv2/commit/085d8a309aafb8ed5a72cad027a1a0ea974938d9

Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>