gawk: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kismet: use correct step override method

alsa-lib: use correct step override method

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dmraid: remove useless strip and use correct step override method

For the target installation step, do not rely on the package being
installed in the staging directory, as it may not be true. So the
dmraid binary is directly taken from the build directory.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnl: remove useless strip and use correct step override

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bmon: use correct way of overriding steps

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncftp: use correct way of overriding steps

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

oprofile: use correct way of overriding steps

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

at: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bridge: remove useless strip and use correct definition for uninstall

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tiff: use correct construct to override target installation

We also remove the stripping, as it is already done globally.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpa_supplicant: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xlib_libX11: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: convert old-style hooks to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssh: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxml2: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libdnet: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpng: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libiconv: convert old-style hook to new-style hook

In addition to that, remove useless stripping since it is done
globally.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lite: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dropbear: convert old-style hook and commands to new-style

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk2: convert old-style hook to new-style

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: convert old-style hook to new-style

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liboil: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usbutils: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mysql_client: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

shared-mime-info: convert old-style hook to new-style hook

We don't want to use 'make DESTDIR=$(TARGET_DIR) install' as we only
want the MIME database to be installed on the target. So we simply
override the target installation command.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freetype: convert old-style hooks to new-style hooks

The strip of the library is also removed, since this is done globally.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sdl_sound: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jpeg: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libidn: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

samba: convert old-style hooks to new-style hooks

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pango: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

taglib: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevent: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libxslt: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libungif: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

avahi: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tn5250: remove old-style hook usage and step override

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libglade: convert old-style hook to new-style hook

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bind: remove old-style hook usage and step override

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usbutils: bump to 0.90

Signed-off-by: Marcus Osdoba <marcus.osdoba@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: Bump to 4.6.3

Also add option to build example and demo code

[Peter: fix patch handling]
Signed-off-by: Paul Jones <paul@pauljones.id.au>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

berkeleydb: fix download url

Sleepycat is now owned by oracle so the old site is gone.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iptables: bump to 1.4.9.1

Adds support for new kernel 2.6.35 features.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kismet: bump to  2010-07-R1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openvpn: bump to 2.1.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dropbear: add option to disable reverse DNS lookups

Add option to disable reverse DNS lookups on client connection, as
connections otherwise stall until DNS times out in configurations without
working reverse DNS.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: default to 2.6.35.4

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: add 2.6.35.x, bump stable versions, get rid of 2.6.27/2.6.28

Based on patch by Marcus Osdoba <marcus.osdoba@googlemail.com>

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: additional 1.17.2 fixes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: Bump to 1.17.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kconfig: remove CONFIG_ references in search/help

We use BR2_*, not CONFIG_* - So remove references to CONFIG_ in search/help
windows.

Long term we should probably consider doing s/^BR2_/CONFIG_/ to get rid
of all this though.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'for-2010.11/kconfig-upgrade' of git://git.busybox.net/~tpetazzoni/git/buildroot

kick off 2010.11 development

Tree is open again.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Tell git to ignore the Quilt internal directory in package/config

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Ensure that all config-related files are generated before the build

The previous commit has removed calls to conf_write_autoconf(), which
is the function that generates the KCONFIG_AUTOCONF,
KCONFIG_AUTOHEADER, KCONFIG_TRISTATE files and the split config (with
one file per config item). Therefore, those things were not generated
anymore before the build.

In order to get them generated before the build, we use the same
mechanism as the kernel: run a silentoldconfig when the .config file
is newer than the KCONFIG_AUTOCONF file.

In Buildroot, all those elements are not really used today, except the
split config which is used a little bit in the toolchain build, in a
try to make sure the toolchain gets rebuilt properly when the
configuration changes. It does not seem that this work has been
completed.

However, as we want to keep the same behaviour as previously, we have
to generate all those elements before starting the build.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add support for savedefconfig

savedefconfig allows to create a minimal defconfig file from an
existing configuration. For example :

 make O=/path/to/some/buildroot/build/directory savedefconfig

will generate a minimal 'defconfig' file in the main Buildroot source
directory.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Factorize environment variables for config utilities

Instead of duplicating the definition of KCONFIG_AUTOCONFIG,
KCONFIG_AUTOHEADER and BUILDROOT_CONFIG, let's define them in a
COMMON_CONFIG_ENV variable, which is used by all the xconfig, gconfig,
menuconfig, nconfig, config, oldconfig, randconfig, allyesconfig,
allnoconfig, randpackageconfig, allyespackageconfig,
allnopackageconfig, defconfig, %_defconfig targets.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: use long options names for the 'conf' utility

The short option names have been removed as they were starting to
cause too much confusion. See
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=4062f1a4c030157216dc8932e27131975cf7253c
for details.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Remove unnecessary ugly hacks in package/config

Those hacks should not be needed and they even make "mconf" fail to
save the configuration file in $(CONFIG_DIR).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add support for the new nconf configuration tool

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Bump package/config to 2.6.36-rc1

The goal is to be able to use savedefconfig to generate minimal
defconfig files.

Four of our patches are removed since the modifications have been
merged upstream. The new nconf configuration utility has appeared.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Clean up our patches against kconfig

Our kconfig-to-buildroot2.patch hasn't been kept up to date with all
the changes made into package/config, and a single patch wasn't very
practical to maintain all our changes. Therefore, this commit adds a
package/config/patches directory, which contains a Quilt series of
patches that correspond to our modifications to the kconfig mechanism.

The huge kconfig-to-buildroot2.patch has been split into 16 smaller
patches. The purpose of some of the modifications has been clearly
identified, while some others were not identified.

The 16 patches together do match exactly the old
kconfig-to-buildroot2.patch. We have been very careful in making sure
that we wouldn't loose any of our modifications.

The only modifications made are :

 * Instead of renaming the kernel Makefile to Makefile.kconfig and
   naming the Buildroot Makefile just 'Makefile', we instead keep the
   original package/config/Makefile from the kernel
   scripts/kconfig/Makefile and name the Buildroot Makefile
   package/config/Makefile.br. The main Buildroot Makefile is modified
   accordingly.

 * The documentation README.buildroot2 is updated to explain how to
   upgrade to a newer version of scripts/kconfig.

 * The kconfig-language.txt documentation is removed, as anybody can
   easily find it in the kernel sources so there's no need to
   duplicate it here.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Implement %_defconfig similarly to the kernel

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Remove CONFIG_DEFCONFIG

There's no need to have a .defconfig, when you run make menuconfig,
make xconfig or anything else for the first time, it will just start
with the default configuration anyway. This is what the kernel does.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/news.html: add 2010.08 announcement link

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

update for 2010.08

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/games: remove broken lxdoom package

It's deprecated upstream (merged in prboom), not updated in years and
broken (uses host includes / missing dependencies), so remove it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fs/squashfs: fix image file permissions

Set image file permissions to 0644 like it was before the fs rework,
instead of the rather unhelpful 0700 (E.G. when image is used for tftp).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add JFFS2 SREC format description

Add JFFS2 SREC format description

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'for-2010.08-3' of git://git.busybox.net/~tpetazzoni/git/buildroot

Fix ldconfig call in target-finalize

Recent versions of ldconfig require the directory /var/lib/ldconfig,
otherwise they bail out with an error. Moreover, having a
/etc/ld.so.conf file also avoids a warning.

In addition to this, we remove the redirection of stderr, so that
errors remain visible to the user.

Thanks to Baruch Siach, Andy Gibbs and Darcy Watkins for investigating
the issue and proposing solutions.

This fixes the build on recent distributions such as Fedora 13 or
Gentoo.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xstroke: fix dependencies

xstroke doesn't need docker, but it does need libXft/Xtst/Xpm.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

packages/atk: fix Makefile

Reported-by: "James J. Dines" <jdines@jdines.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs/images: optimize small images to speed up page loading

Remove alpha channel and limit number of colors used. This gets the images
down to ~37% of their previous size without any visual degrading (in fact
it now looks correctly on ancient IE versions with broken png alpha
handling).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

update for 2010.08-rc2

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gcc: remove deprecated gcc 4.2.[1-3] versions and unused patches

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kismet: fix build when none of client, server or drone are selected

Random package configuration can trigger the selection of kismet, but
neither of client, server or drone suboptions. In this case, the
KISMET_TARGET_BINARIES variable is empty, leading to failure during
the installation stage.

At the same time, we remove the useless stripping of the installed
binaries, since this is done globally by the Buildroot infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add the patch fixing gcc 4.2.4 to gcc 4.2.2

The patch introduced by commit
1ed2e4fffd0d852e62bc98e92045a132f24c37d8 must also be added to gcc
4.2.2 to let the AVR32 toolchain build properly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: #2395 is resolved

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ncurses: get rid of unused BR2_PACKAGE_NCURSES_TARGET_HEADERS handling

The option was removed from Config.in in 58508f39c (ncurses: remove
dedicated target-headers option), so remove it from the makefile as
well.

Reported-by: Ian <reg-ian.ridley-buildroot@hydrix.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pango: needs C++ for freetype handling

Pango was recently updated to v1.28 as a dependency of webkit, but its
freetype support has unfortunately been rewritten with parts in C++
(since pango 1.25), so adjust dependencies of pango and users of it to
require C++ support.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

luafilesystems: unbreak builds with largefile support

A typo was introduced in e6c4ce6c (luafilesystem: remove LARGE_FILE
constraint), breaking the build when largefile support was enabled.

Reported-by: Marcus Osdoba <marcus.osdoba@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

initramfs: Don't overwrite $(TARGET_DIR)/init if it exists

Closes #2443

Allow use of custom init scripts.

Signed-off-by: Simon Pasch <fpasch@googlemail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: fix source/source-check/external-deps with O=

Based on patch by Will Wagner <will_wagner@carallon.com>.

Now that the .config is located in the output directory when O=<dir>
is used, we have to pass the O= option to make for
source/source-check/external-deps to get them to look in the right place
for the .config.

Fix it by introducing an EXTRAMAKEARGS variable and use it whenever we
call back into the toplevel Makefile.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pppd.mk installs radattr.so twice and omits radrealms.so

In pppd.mk the radattr.so plugin (for radiua) is installed twice (the second
install overwriting the first) but the radrealms.so plugin is omitted from
the install. This appears to be a copy-paste error.

Below is patch that corrects this.

signed-off by: Darcy Watkins <dwatkins@tranzeo.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

stunnel: remove broken package

It doesn't build as there's no dependency on openssl, and it hasn't seen
any real updates since it got added in 2006, so simply remove it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

proftpd: breaks with parallel builds

The proftpd build system has a race condition, which may break the build
with high -j<level> values (libsupp.a isn't built by the time it is needed).

Fix it by using MAKE1 instead.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

samba: avahi support needs avahi-daemon / dbus

./configure checks for libavahi-client.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

startup-notification: fix typo in dependencies line

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: fix ppc e500 handling

Closes #2449

Signed-off-by: Stanislav Bogatyrev <bogatyrev_stanislav@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fs/squashfs: fix endianness typo for squashfs3

Signed-off-by: Stanislav Bogatyrev <bogatyrev_stanislav@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: fix sysroot confusion in ./configure

qt's configure script is getting confused now that we're passing --sysroot=
in QMAKE_CC / QMAKE_CXX, causing misdetection of features and runtime
breakage.

Fix it by passing --sysroot in CFLAGS/CXXFLAGS instead.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Config.in: mark BR2_CONFIG_CACHE as experimental and disable by default

As it is known to break with certain package combinations.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/gcc: fix 4.2.4 build after uClibc NTPL support got added

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: additional 1.17.1 fixes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with changes from for-2010.08 branch

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>