git.libre-soc.org Git - mesa.git/log

glsl: add NV_viewport_array2 support

This enables gl_Layer/gl_ViewportIndex when the ext is enabled, as well
as adding the new gl_ViewportMask[] array and viewport_relative layout
qualifier for gl_Layer.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4529>

compiler: add VARYING_SLOT_VIEWPORT_MASK

See GL_NV_viewport_array2::gl_ViewportMask for how this is supposed
to work.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4529>

ir3: Handle load_ubo_ir3 when promoting to constants

This restores support for promoting UBO loads to constant loads when
using LDC.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4568>

ir3: Fix LDC offset units

I had missed that LDC actually uses vec4 units for its offset. This
means that we have to create a new instruction, and lower it in
ir3_nir_lower_io_offsets, similar to the existing SSBO instructions.
Unfortunately we can't assume that loads are always vec4-aligned, so we
have to use the alignment information that NIR gives us. Unfortunately,
it's currently woefully inadequate, and will have to be fixed to give us
good codegen in the future.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4568>

Revert "nvc0: fix line width on GM20x+"

This reverts commit a0e57432b76c32f2109dab0ad3df0ba03967441c.

It's unclear what caused the test to fail back then. Now it's seems to be
reversed. I tested with a close enough piglit and mesa branch and wasn't
able to reproduce the same test result I've got in some older piglit runs.

Fixes:
dEQP-GLES2.functional.rasterization.primitives.lines_wide
dEQP-GLES2.functional.rasterization.primitives.line_strip_wide
dEQP-GLES2.functional.rasterization.primitives.line_loop_wide
dEQP-GLES2.functional.rasterization.limits.points
dEQP-GLES2.functional.clipping.line.wide_line_z_clip
dEQP-GLES2.functional.clipping.line.wide_line_z_clip_viewport_center
dEQP-GLES2.functional.clipping.line.wide_line_z_clip_viewport_corner
dEQP-GLES2.functional.clipping.line.wide_line_clip
dEQP-GLES2.functional.clipping.line.wide_line_clip_viewport_center
dEQP-GLES2.functional.clipping.line.wide_line_clip_viewport_corner
dEQP-GLES2.functional.clipping.line.wide_line_attrib_clip
dEQP-GLES2.functional.polygon_offset.default_result_depth_clamp
dEQP-GLES2.functional.polygon_offset.default_factor_1_slope
dEQP-GLES2.functional.polygon_offset.fixed16_result_depth_clamp
dEQP-GLES2.functional.polygon_offset.fixed16_factor_1_slope

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4575>

anv: Fix UBO range detection in anv_nir_compute_push_layout

This fixes two bugs:  First, if the same block index showed up twice, we
only pick the first one.  Second, we weren't multiplying by 32.  This
didn't show up in tests because RBA testing is garbage.  Found while
looking at shaders from the UE4 Shooter demo.

Fixes: e03f9652 "anv: Bounds-check pushed UBOs when..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4578>

anv: Advertise SEND count through VK_EXT_pipeline_executable_properties

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4578>

iris: make BATCH_SZ smaller by BATCH_RESERVED bytes

Iris allocates gem buffers using buckets of allocation sizes that are
page aligned. We always ask for batch buffers of size BATCH_SZ +
BATCH_RESERVED, which is not page aligned: we ask for 65552 bytes,
which ends up in the bucket of size 81920, resulting in 20% unused
space. Adjust things so there is no waste of space: BATCH_SZ +
BATCH_RESERVED is now 65536.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4561>

iris: remove useless bo->gtt_offset assignment

We assign a real value a few lines below, and none of the lines in
between rely on the zeroed bo->gtt_offset value.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4561>

iris: remove unnecessary forward declaration

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4561>

iris: remove hole from struct iris_bo

This decreases the size of the struct on a 64bit machine from 144 to
136. While that's not a lot, this is one of the structs that we're
allocating all the time.

For a full Aztec run on BDW we allocate this struct 3273 times, and we
can have up to 3259 of them live at the same time. So we end up saving
just a little over 6 pages for this benchmark.

Spotted this while trying to add another bool for an unrelated
feature.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4561>

Fix util/process test on Cygwin

It seems meson returns the filename with extension for full_path(), even
though Cygwin does it's best to pretend the file doesn't have that
extension.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4514>

llvmpipe/nir: free the nir shader

Fixes: 18f896e55d96 (llvmpipe: add initial nir support)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4563>

draw/tess: free the NIR

Fixes: 0d02a7b8ca794 (draw: add main tessellation code)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4563>

draw: free the NIR IR.

Not sure how I missed this, the ownership was a bit blurry,
free the NIR.

Fixes: bf12bc2dd7a2 (draw: add nir info gathering and building support)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4563>

freedreno/turnip: Update GRAS_LAYER_CNTL to GRAS_MAX_LAYER_INDEX

After some experimentation, I believe that GRAS_LAYER_CNTL is
actually just a count register storing the number of layers in the
render target. While debugging cube_array geometry tests, I noticed
that the blob was setting an unknown 0x8 to LAYER_CNTL, so I checked
the value of LAYER_CNTL for various layer sizes:

1: LAYER_CNTL=0
2: LAYER_CNTL=1
3: LAYER_CNTL=2
4: LAYER_CNTL=3
9: LAYER_CNTL=8
256: LAYER_CNTL=255
2000: LAYER_CNTL=1999

Seems like this register just stores a count of the largest layer
that can be written to via gl_Layer. This commit updates the reg
docs, freedreno's gs implementation, and turnip's gs implementation.

Fixes dEQP-VK.geometry.layered.cube_array.*

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4541>

turnip: Emit geometry shader descriptor consts

Without these consts, the geometry shader is unable to read from
textures or uniforms.

Fixes dEQP-VK.geometry.layered.*.readback

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4541>

turnip: Correctly set layer stride for 3D images

Previously we were using layout.layer_size for the layer stride, but
in Vulkan, you can alias a 3D image as an array of 2D images via the
VK_IMAGE_CREATE_2D_ARRAY_COMPATIBLE_BIT flag. One reason to use
this behavior is so the geometry shader can write to a specific
depth in a 3D framebuffer with gl_Layer.

Since the 3D image is not a *true* layered image, layer_size is 0.
Instead, we can copy what freedreno does and use the slice size.

Fixes dEQP-VK.geometry.layered.3d.*

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4541>

gallium: initialize viewport swizzle in cso_set_viewport_dims

Fixes: dEQP-GLES2.functional.fragment_ops.depth_stencil.stencil_* and more
Fixes: 4137a79c2a7e ("gallium: add viewport swizzling state and cap")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4567>

mesa: fix enum value of VIEWPORT_SWIZZLE_POSITIVE_W_NV

Fixes: ff168b297d94 ("mesa: add GL_NV_viewport_swizzle support")
Reported-by: Roy Spliet <nouveau@spliet.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4567>

radv/aco: do not advertise VK_KHR_shader_subgroup_extended_types

It's unsupported because small bitsizes are still not completely
supported. It should have been disabled by default with ACO.

Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4549>

nvc0: enable ASTC and ETC on GM20B

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4554>

glx: omit loader_loader() for macOS

Earlier commit added the code unconditionally, since the loader code
itself is already built on macOS.
Although it did not consider the #include mayhem that src/glx is.

In particular, none of the __GLXDRI{screen,context,drawable) are
available for macOS... those are pulled by dri_common.[ch].

Ideally we'll untangle that, but for the time being simply #ifdef out
the include/call.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2726
Fixes: b699d070a6d ("glx: set the loader_logger early and for everyone")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4490>

clover: expose cl_arm_shared_virtual_memory for devices with SVM support

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

clover: implement cl_arm_shared_virtual_memory

v2: use static array to keep name -> func mapping
v3: use unordered_map
v4: handle ARM constants
    reorder dispatch table
    wrap enqueue APIs as the command value differs between khr and arm
v5: move declarations into dispatch.hpp
    handle CL_MEM_USES_SVM_POINTER_ARM in clGetMemObjectInfo
v6: breaking long lines

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

clover: implement SVM functions for devices with fine grained system SVM support

all of the functionality can be mapped to malloc/free if the device supports
fine grained system SVM.

v2: fix some API bugs found with the OpenCL CTS
v3: remove validate_even_wait_list
    improve implementation of clSetKernelExecInfo
    make clEnqueueSVMFree spec compliant
    rename can_emulate_non_system_svm to has_system_svm and make it a member method
    improve validation in clEnqueueSVMMemFill
    handle CL_MEM_USES_SVM_POINTER in clGetMemObjectInfo
v4: break long lines and other minor cosmetic adjustments

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

clover: implement clSetKernelArgSVMPointer

it is pretty much identical to a clSetKernelArg for a scalar field, except
it is only valid for global and constant memory pointers.

Also the type equals void* on the Host, so we can just check the size of it.

v2: prefer using target_size to extend the pointer value
v3: handle more corner cases in combiation to clSetKernelArg

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

clover: implement CL_DEVICE_SVM_CAPABILITIES

v2: without supporting userptrs SVM can't be implemented as it's impossible
to ensure memory consistency with HOST_PTR buffers
v3: fix comment style
v4: fixes typo in comment

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

clover: add stubs for SVM

although most of those are 2.0 core functions, there is
cl_arm_shared_virtual_memory to expose those in a 1.2 context. But we
should be able to expose this extension with 1.1 as well as there is no
technicaly reason why this shouldn't work.

v2: move svm functions into existing files
v3: rename func args to match convention

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

gallium: add PIPE_CAP_SYSTEM_SVM

v2: split enum in specific caps to abstract the CL enum
v3: remove BUFFER_SVM caps

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2076>

aco: fix 1D textureGrad() on GFX9

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Fixes: 6f718edcedd ('aco: simplify gathering of MIMG address components')
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4550>

iris: drop cache coherent cpu mapping for external BO

We have to assume any external buffer could be used by the display HW.
In the case that buffer is also CPU mapped, we want to assume no cache
coherency as it is only available between GT & CPU, not display.

Many thanks to Michel Dänzer for the hint!

v2: Move cache coherent drop to bufmgr (Chris)

v3: Also make BO external if created with PIPE_BIND_SHARED (Eric)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2552
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4533>

aco: fix nir_op_frexp_exp with 16-bit floats and negative exponents

v_frexp_exp_i16_f16 returns the two's complement for negative
exponents. For example, with 0.333252 it returns 0.666504 for
the mantissa and 65535 for the exponent (-1 in decimal).

RADV/LLVM and AMDVLK do a v_bfe_i32 and AMDGPU-PRO uses SDWA with
the sign extension bit set. The latter is probably what we want to
do in long term but for now RA doesn't support changing non-SDWA
instructions to SDWA if useful/needed.

Fixes dEQP-VK.glsl.builtin.precision_fp16_storage16b.frexp.compute.*.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4546>

u_blitter: fix stencil blitting

Fixes: KHR-GL45.packed_depth_stencil.blit.depth32f_stencil8
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

draw: fix user culling pipeline order. (v2)

GL spec requires user culling, then clipping then face culling.
llvmpipe was doing clipping then user culling then face culling.

Fix the ordering by adding a new user_cull stage that does the user
culling

Fixes piglit clip_cull-4.shader_test

v2: simplify this a lot (Roland)

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

draw/cull: run pipeline for culled points.

This just appears to be missing:
Fixes:
KHR-GL45.cull_distance.functional

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

llvmpipe/setup: move line stats collection earlier.

You have to count the stats pre-culling here.

Fixes:
KHR-GL45.pipeline_statistics_query_tests_ARB.functional_primitives_vertices_submitted_and_clipping_input_output_primitives

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

draw: fix tessellation stats query

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

llvmpipe: fix no tokens detections.

this only applies to the TGSI path, fixes
KHR-GLES31.core.geometry_shader.api.program_pipeline_vs_gs_capture

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

gallivm/draw: calloc prim id toavoid undef

Otherwise masked off channels can access random bad memory

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

gallivm/nir: lower implicit lod to tex.

Fixes some sampling issues in vertex shaders

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

gallivm: fix left over shader vote debug

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

llvmpipe/query: fix transform feedback overflow any queries.

The any queries need to signal if any stream has overflowed,
so we have to track all the streams.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

llvmpipe: report tessellation shader statistics.

Fixes KHR-GL45.pipeline_statistics_query_tests_ARB.functional_tess_queries

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

draw: collect tessellation invocations statistics

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

llvmpipe: fixup context leaks.

Make sure we unreference all resources for all shaders on context
destruction.

Fixes: eb5227173f03 (llvmpipe: add support for tessellation shaders)
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4560>

swr: Remove Byte Order Mark.

before:
$ file src/gallium/drivers/swr/rasterizer/codegen/gen_llvm_types.py
src/gallium/drivers/swr/rasterizer/codegen/gen_llvm_types.py: Python script text executable, UTF-8 Unicode (with BOM) text

after:
$ file src/gallium/drivers/swr/rasterizer/codegen/gen_llvm_types.py
src/gallium/drivers/swr/rasterizer/codegen/gen_llvm_types.py: Python script text executable, ASCII text

This patch also fixes this build error.

  File "src/gallium/drivers/swr/rasterizer/codegen/gen_llvm_types.py", line 1

    # Copyright (C) 2014-2018 Intel Corporation.   All Rights Reserved.

    ^

SyntaxError: invalid character in identifier

Fixes: c6e67f5a9373 ("gallium/swr: add OpenSWR rasterizer")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4221>

glsl/list: Fix undefined behaviour of foreach_* macros

These macros produced a lot of errors with ubsan preventing us from
expanding the ubsan coverage on CIs.

C++ spec has such clause:

"If the prvalue of type "pointer to cv1 B" points to a B that is
  actually a subobject of an object of type D, the resulting pointer
  points to the enclosing object of type D. Otherwise, the result
  of the cast is undefined."

Ubsan error example:

../src/compiler/glsl/builtin_functions.cpp:4945:4: runtime error: downcast of address 0x559b926abb50 which does not point to an object of type 'ir_instruction'
0x559b926abb50: note: object has invalid vptr
  9b 55 00 00  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  58 ba 6a 92 9b 55 00 00  01 00 00 00
               ^~~~~~~~~~~~~~~~~~~~~~~
               invalid vptr
     #0 0x559b914dbe1a in call ../src/compiler/glsl/builtin_functions.cpp:4945

Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4129>

freedreno/ir3: don't overwrite wrmask in ir3_SAM

Fixes (with other patches to allow these tests to run):

dEQP-VK.ycbcr.query.size_lod.vertex.*

Suggested-by: Rob Clark <robclark@gmail.com>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4557>

freedreno/ir3: fix emit_tex_info split_dest

Fixes a "free(): invalid next size (fast)" error in:

dEQP-VK.glsl.texture_functions.query.texturequerylevels.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4557>

gallium/tgsi_to_nir: Set nir_intrinsic_align_mul to 16 and offset to 0

Since the alignment is now checked in the validator we must set it.

v2: Use alignement of 4, i.e. dest bit size by eight.
v3: Use alignment 16 (Rhys Perry & Jason Ekstand)
v4: Use nir_intrinsic_set_align to make it clear that align offset is 0
(Jason)

Fixes: e78a7a182524f091e2d77ba97bfbe057c3975cab
nir: Assert memory loads are aligned

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4544>

ir3: Fix txs with bindless

I missed that this had a micro-optimization to assume that there was
only ever one source, which is no longer valid for the bindless model
since we now have a bindless handle source. Remove the optimization to
fix assertion failures with turnip.

Fixes e.g.
dEQP-VK.glsl.texture_functions.query.texturesize.sampler2d_fixed_vertex

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4548>

gitlab-ci: make explicit tracie is gitlab specific

Tracie main script and traces.yml file talk about repo(sitory) when it
actually means GitLab's project.

Since the script is GitLab's API specific, make it clear.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>

gitlab-ci: protect usage of shell variables with double quotes

Not really needed right now, but seems dangerous to have paths without
the double quote.

I went ahead and used in the rest of values too.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>

gitlab-ci: Vulkan tracie runner to return last command exit code

No need to cache the return value if there is only a single trace
execution call.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4496>

gitlab-ci: Check the Mesa version used for tracie tests

Verify that the Mesa version used when running tracie tests is the
one that was built by CI, rather than any installed distro version.

Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Reviewed-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3894>

aco: clear moved operands in get_reg_create_vector()

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4507>

aco: improve p_create_vector RA for sub-dword operands

These's still improvements needed for sub-dword definitions, but that's
not as simple.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4507>

aco: fix p_extract_vector validation

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4507>

aco: improve vector optimization with sub-dword vectors

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4507>

radv: use RMW packets for updating the maximum sample distance

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4531>

radv: add radeon_set_context_reg_rmw() helper

For emitting RMW packets in the command stream. This new helper
will be useful for implementing extended dynamic states to only
overwrite the fields that need to be updated instead of storing
more values in the pipeline.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4531>

scons/windows: Support build with LLVM 10.

LLVM engine component contains 2 new libraries, LLVMCFGuard and LLVMTextAPI.
Without them build fails like in this run: https://ci.appveyor.com/project/Alexpux/mingw-packages/builds/32102425/job/wkmb4gimfqkkb3cg

Cc: <mesa-stable@lists.freedesktop.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4521>

meson: Link Gallium Nine with ld_args_build_id

This fixes an assertion in iris_disk_cache_init() when the initialization
goes through drm_create_adapter(), which lives in d3dadapter9.so.
In this case build_id_find_nhdr_for_addr() fails and returns NULL, since
the shared library does not include a build ID.

The issue can be reproduced with an iris capable GPU and Xnine, while
removing the shader cache prior to launching the application.

Fix this by doing the same as in 29ea92e6a1e8f5cb3295011d907ea211d6f8f644.

Fixes: 4756864cdc5f "iris: Start wiring up on-disk shader cache"
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4499>

svga: fix build on FreeBSD

MADV_HUGEPAGE only exists on Linux

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3966>

freedreno/a5xx+: Skip compiling the old gmem blit programs.

Saves a bunch of noise for me to sort through in IR3_SHADER_DEBUG=vs,fs
shader-db/run <single shader_test>. I found that we were crashing on
destroy of NULL programs in fd_prog_fini, so I replicated the gpu_id < 300
early exit from fd_prog_init() down to _fini as well.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4538>

pan/bit: Add BI_CONVERT tests

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/bit: Add BI_CONVERT interpretation

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/bi: ADD packing for CONVERT

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/bi: Rewrite conversion packing

To support roundmodes and other goodies.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/bi: Fix incorrect swizzle packing assert

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/bi: Set BI_ROUNDMODE for BI_CONVERT

It's rarely used in GL but converts do have roundmodes.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

pan/midgard: Fix f2u naming confusion

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4539>

meson: Specify the maximum required libdrm in dri.pc

When dealing with a regression in libdrm-2.4.101, I masked the package
in Gentoo. In doing so, we discovered that Mesa's dri.pc specifies a
version requirement in dri.pc for >= the version of libdrm Mesa was
built against, thus preventing packages from being rebuilt with the
older version of libdrm installed.

Let's reduce this version requirement to the latest libdrm required by
Mesa instead, since libdrm is backward compatible.

Fixes: a3a16d4aa7e ("meson: use dep_libdrm version for pkg-config")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4534>

freedreno/ir3/ra: cleanup some leftovers

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: rename depth->dce

Since DCE is the only remaining function of this pass, after the pre-RA
scheduler rewrite.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: better cleanup when removing unused instructions

Do a better job of pruning when removing unused instructions, including
cleaning up dangling false-deps.

This introduces a new ssa src pointer iterator, which makes it easy to
clear links without having to think about whether it is a normal ssa
src or a false-dep.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3/ra: handle array case for SFU select_reg opt

The src of the SFU instruction could also be array/reg (non-SSA).
Handle this case too.

The postsched cp pass makes this scenario more likely.

Fixes: cc82521de4e ("freedreno/ir3: round-robin RA")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: add mov/cov stats

While not always avoidable, cov instructions are a useful thing to look
at to see if we could fold into src.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3/postsched: avoid moving tex ahead of kill

Add extra dependencies of tex/mem instructions on previous kill
instructions to avoid moving them ahead of kills.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3/postsched: remove some leftovers

These aren't used in postsched.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3/sched: awareness of partial liveness

Realize that certain instructions make a vecN live, and account for
this, in hopes of scheduling the remaining components of the vecN
sooner.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: new pre-RA scheduler

This replaces the depth-first search scheduler with a more traditional
ready-list scheduler. It primarily tries to reduce register pressure
(number of live values), with the exception of trying to schedule kills
as early as possible. (Earlier iterations of this scheduler had a
tendency to push kills later, and in particular moving texture fetches
which may not be necessary ahead of kills.)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: fix location of inserted mov's

If the group pass must insert a mov to resolve conflicts, avoid the mov
appearing *after* the meta:collect whose src it is.

The current pre-RA scheduler doesn't really care about the initial
instruction order, but the new one will in some cases.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: simplify grouping pass

Since bdf6b7018cedf95b554e21953d5a1935d3067ce7 the logic only needs to
handle grouping collect srcs, So remove the now unnecessary indirection.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: make falsedep use's optional

Add option when collecting uses to control whether they include
falsedeps or not.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/ir3: spiff out disasm a bit

for verbose mode, print also the instruction "cycle" (which takes into
account (rptN) and (nopN)) in addition to instruction offset.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4440>

freedreno/computerator: support bindless sampler instructions

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4526>

freedreno/computerator: support nop prefix

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4526>

freedreno/ir3: CSE the up/downconversion of SEL's cond's size.

Not many programs hit this, but if you were, say, selecting between vec4s,
you'd convert the cond 4 times.

instructions in affected programs: 2957 -> 2717 (-8.12%)
nops in affected programs: 989 -> 899 (-9.10%)
non-nops in affected programs: 1968 -> 1818 (-7.62%)
dwords in affected programs: 3232 -> 2752 (-14.85%)
last-baryf in affected programs: 102 -> 90 (-11.76%)
full in affected programs: 5 -> 4 (-20.00%)
sstall in affected programs: 329 -> 329 (0.00%)
(ss) in affected programs: 86 -> 105 (22.09%)
(sy) in affected programs: 14 -> 12 (-14.29%)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4516>

freedreno/ir3: Stop doing b2n on the SEL condition.

SEL_B32 (and presumably B16) checks for 0 or nonzero in the condition
(tested by just stuffing a uniform's value into it), so there's no need to
do ir3_b2n() on it, or any preceding ir3_n2b().

instructions in affected programs: 664444 -> 659927 (-0.68%)
nops in affected programs: 267898 -> 266312 (-0.59%)
non-nops in affected programs: 420260 -> 417329 (-0.70%)
dwords in affected programs: 144032 -> 137568 (-4.49%)
last-baryf in affected programs: 10801 -> 10321 (-4.44%)
full in affected programs: 2003 -> 2002 (-0.05%)
sstall in affected programs: 76670 -> 77405 (0.96%)
(ss) in affected programs: 4515 -> 4525 (0.22%)
(sy) in affected programs: 612 -> 604 (-1.31%)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4516>

tnl: Code formatting in t_rebase.c

Many little changes.  Almost everything is indentation or removal of
trailing whitespace.  Some places move a loop variable declaration to
the loop.  Some comments either re-wrapped or converted to single
line.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Code formatting in t_draw.c

So many little changes.  Almost everything is indentation or removal of
trailing whitespace.  There's a couple places where an "else" is moved
to the previous line with the "}".  Some places move a loop variable
declaration to the loop.  One change of assert to unreachable.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Silence unused parameter warnings in _tnl_split_inplace

Unused since db0eb3a437f ("vbo: Fix up in-place splitting for non-contiguous/indexed primitives.") which landed in 2010.

src/mesa/tnl/t_split_inplace.c: In function ‘_tnl_split_inplace’:
src/mesa/tnl/t_split_inplace.c:270:27: warning: unused parameter ‘min_index’ [-Wunused-parameter]
  270 |                    GLuint min_index,
      |                    ~~~~~~~^~~~~~~~~
src/mesa/tnl/t_split_inplace.c:271:27: warning: unused parameter ‘max_index’ [-Wunused-parameter]
  271 |                    GLuint max_index,
      |                    ~~~~~~~^~~~~~~~~

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Silence unused parameter warnings in dump_draw_info

src/mesa/tnl/t_split_copy.c: In function ‘dump_draw_info’:
src/mesa/tnl/t_split_copy.c:149:35: warning: unused parameter ‘ctx’ [-Wunused-parameter]
  149 | dump_draw_info(struct gl_context *ctx,
      |                ~~~~~~~~~~~~~~~~~~~^~~
src/mesa/tnl/t_split_copy.c:154:23: warning: unused parameter ‘min_index’ [-Wunused-parameter]
  154 |                GLuint min_index,
      |                ~~~~~~~^~~~~~~~~
src/mesa/tnl/t_split_copy.c:155:23: warning: unused parameter ‘max_index’ [-Wunused-parameter]
  155 |                GLuint max_index)
      |                ~~~~~~~^~~~~~~~~

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Silence unused parameter warnings in _tnl_draw_prims

A tangled mess of a couple parameters that nobody wanted.

src/mesa/tnl/t_draw.c: In function ‘_tnl_draw_prims’:
src/mesa/tnl/t_draw.c:440:42: warning: unused parameter ‘tfb_vertcount’ [-Wunused-parameter]
  440 |     struct gl_transform_feedback_object *tfb_vertcount,
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
src/mesa/tnl/t_draw.c:441:35: warning: unused parameter ‘stream’ [-Wunused-parameter]
  441 |                          unsigned stream)
      |                          ~~~~~~~~~^~~~~~

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Silence unused parameter 'attrib' warning in convert_half_to_float

Also clean up some trivial code / whitespace style issues.

src/mesa/tnl/t_draw.c: In function ‘convert_half_to_float’:
src/mesa/tnl/t_draw.c:121:57: warning: unused parameter ‘attrib’ [-Wunused-parameter]
121 | const struct gl_array_attributes *attrib,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Don't dereference NULL obj pointer in t_rebase_prims

Structurally the code is now similar to the handling of other
gl_buffer_object::obj pointers elsewhere in TNL. The fixes tag is a
little bit misleading. I think the change in that commit just exposes a
previously existing bug.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2746
Fixes: f3cce7087a5 ("mesa: don't ever bind NullBufferObj for glBindBuffer targets")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>

tnl: Don't dereference NULL obj pointer in replay_init

Structurally the code is now similar to the handling of other
gl_buffer_object::obj pointers elsewhere in TNL. The fixes tag is a
little bit misleading. I think the change in that commit just exposes a
previously existing bug.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2746
Fixes: f3cce7087a5 ("mesa: don't ever bind NullBufferObj for glBindBuffer targets")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4512>