gitignore: Ignore .tar.xz files.

mesa: Build with subdir-objects.

glsl: Build a libglsl_util library.

Rather than sourcing files with ../dir/file.c which leads to distclean
wiping out ../dir's .deps directory.

mapi: Build with subdir-objects.

mapi: Remove vgapi from SUBDIRS.

OpenVG is disabled with via autotools.

mesa: Drop inclusion of glapi_gen.mk.

Some glapi headers used to be generated from this Makefile.am, but no
longer.

glsl: Build with subdir-objects.

Apparently $(top_srcdir) is not expanded in a source list when using
subdir-objects, so remove that. It's not clear to me why we were going
to such lengths to prefix each source file anyway.

nir: Add headers to distribution.

nir: Add nir_{opt_,}algebraic.py to distribution.

mesa: Add format_{un,}pack.py to distribution.

mesa: Remove pack_tmp.h from sources.

Missed in commit 3a4de321.

nir: add generated file to .gitignore

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965: Fix min_vs_entries for CHV

According to BSpec the correct number for min_vs_entries is 34 for CHV.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

i965: Fix max_wm_threads for CHV

Change max_wm_threads to match the spec on CHV. The max number of
threads in 3DSTATE_PS is always programmed to 64 and the hardware
internally scales that depending on the GT SKU. So this doesn't
change the max number of threads actually used, but it does affect
the scratch space calculation.

On CHV the old value was too small, so the amount of scratch space
allocated wasn't sufficient to satisfy the actual max number of
threads used.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

glsl: fix stale comment

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>

i965/emit: Assert that src1 is not an MRF after doing the MRF->GRF conversion

When emitting texturing from indirect texture units, we need to be able to
scratch around in the header message.  Since we only do this for >= HSW,
this is ok since there are no MRFs.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj phogat <anuj.phogat@gmail.com>

i965/emit: Do the sampler index adjustment directly in header.0.3

Prior to this commit, the adjust_sampler_state_pointer function took an
extra register that it could use as scratch space.  The usual candidate was
the destination of the sampler instruction.  However, if that register ever
aliased anything important such as the sampler index, this would scratch
all over important data.  Fortunately, the calculation is such that we can
just do it in place and we don't need the scratch space at all.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

st/nine: Correctly handle when ff vs should have no texture coord input/output

Previous code semantic was:

. if ff ps will not run a ff stage, then do not output texture coords for this stage
for vs
. if XYZRHW is used (position_t), use only the mode where input coordinates are copied
to the outputs.

Problem is when apps don't give texture inputs. When apps precise PASSTHRU, it means
copy texture coord input to texture coord output if there is such input. The case
where there is no texture coord input wasn't handled correctly.

Drivers like r300 dislike when vs has inputs that are not fed.

Moreover if the app uses ff vs with a programmable ps, we shouldn't look at
what are the parameters of the ff ps to decide to output or not texture
coordinates.

The new code semantic is:

. if XYZRHW is used, restrict to PASSTHRU
. if PASSTHRU is used and no texture input is declared, then do not output
texture coords for this stage

The case where ff ps needs a texture coord input and ff vs doesn't output
it is not handled, and should probably be a runtime error.

This fixes 3Dmark05, which uses ff vs with programmable ps.

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Change comment relating to vertex shader inputs not matching declaration

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Allocate vs constbuf buffer for indirect addressing once.

When the shader does indirect addressing on the constants,
we allocate a temporary constant buffer to which we copy
the constants from the app given user constants and
the constants filled in the shader.

This patch makes this buffer be allocated once.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Allocate the correct size for the user constant buffer

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Add variables containing the size of the constant buffers

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix sm3 relative addressing for non-debug build

Relative addressing needs the constant buffer to get all
the correct constants, even those defined by the shader.

The code to copy the shader constants to the constant buffer
was enabled only for debug build. Enable it always.

Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Remove unused code for ps

Since constant indirect adressing is not allowed for ps,
we can remove our code to handle that.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Correct rules for relative adressing and constants.

relative adressing for constants is possible only for vs float
constants.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXREG2AR, TEXREG2GB and TEXREG2RGB

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXDP3TEX

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXDP3

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXDEPTH

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXM3x3SPEC

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXM3x2TEX

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: implement TEXM3x2DEPTH

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix TEXM3x3 and implement TEXM3x3VSPEC

The fix is that this line:
"src[s] = tx->regs.vT[s];" is wrong if s doesn't start from 0.
Instead access tx->regs.vT directly when needed.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fill missing dst and src number for some instructions.

Not filling them correctly results in bad padding and later crash.

Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Implement TEXCOORD special behaviours

texcoord for ps < 1_4 should clamp between 0 and 1 the values.

texcrd (texcoord ps 1_4) does not clamp and can be used with
two modifiers _dw and _dz that means the channels are divided
by w or z.
Implement those in shared code, since the same modifiers can be used
for texld ps 1_4.

v2: replace DIV by RCP + MUL
v3: Remove an useless MOV

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix CALLNZ implementation

Nothing seems to indicates the negation modifier would be stored in the
instruction flags instead of the source modifier. tx_src_param has
already handled it if it is in the source modifier.

In addition,
when the card supports native integers, the boolean
are stored in 32 bits int and are equal to
0 or 0xFFFFFFFF.

Given 0xFFFFFFFF is NaN if it was a float, better use
UIF than IF.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix some fixed function pipeline operation

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Clamp ps 1.X constants

This is wine (and windows) behaviour.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Remove duplicated code for ps texcoord input declaration

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix CND implementation

Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Match REP implementation to LOOP

Previous implementation was behaving fine, but improve it by:
. Improved documentation
. Decreasing counter (comparing to 0 is likely to be faster than to constant)
. Move the counter update at the end for better performance for shaders that
break the loop earlier than when the count is done.

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Rewrite LOOP implementation, and a0 aL handling

Previous implementation didn't work well with nested loops.

Instead of using several address registers, put a0 and aL
into normal registers, and copy them to one address register when
we need to use them.

Wine tests loop_index_test() and nested_loop_test() now pass correctly.

Fixes r600g crash while loading Bioshock -
bug https://bugs.freedesktop.org/show_bug.cgi?id=85696

Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Correct LOG on negative values

We should take the absolute value of the input.

Also return -FLT_MAX instead of -Inf for an input of 0.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Handle NRM with input of null norm

When the input's xyz are 0.0, the output
should be 0.0. This is due to the fact that
Inf * 0 = 0 for dx9. To handle this case,
cap the result of RSQ to FLT_MAX. We have
FLT_MAX * 0 = 0.

Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Handle RSQ special cases

We should use the absolute value of the input as input to ureg_RSQ.

Moreover, an input of 0.0 should return FLT_MAX.

Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix POW implementation

POW doesn't match directly TGSI, since we should
take the absolute value of src0.

Fixes black textures in some games

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix typo for M4x4

Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Correctly declare NineTranslateInstruction_Mkxn inputs

Let's say we have c1 and c2 declared in the shader and c0 given by the app

Then here we would have read c0, c1 and c2 given by the app, instead
of the correct c0, c1, c2.

This correction fixes several issues in some games.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Saturate oFog and oPts vs outputs

According to docs and Wine, these two vs outputs have
to be saturated.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Remove some shader unused code

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Convert integer constants to floats before storing them when cards don't support integers

The shader code is already behaving as if they are floats when the the card doesn't support integers

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Rework of boolean constants

Convert them to shader booleans at earlier stage.
Previous code is fine, but later patch will make
integers being converted at earlier stage, so do
the same for booleans

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Add ATI1 and ATI2 support

Adds ATI1 and ATI2 support to nine.

They map to PIPE_FORMAT_RGTC1_UNORM and PIPE_FORMAT_RGTC2_UNORM,
but need special handling.

Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Check if srgb format is supported before trying to use it.

According to msdn, we must act as if user didn't ask srgb if we don't
support it.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Hack to generate resource if it doesn't exist when getting view

Buffers in the MANAGED pool are supposed to have the content in a ram buffer,
a copy in VRAM if there is enough memory (driver manages memory and decide when
to delete the buffer in VRAM).

This is not implemented properly in nine, and a VRAM copy is going to be created
when the RAM memory is filled, and the VRAM copy will get synced with the RAM
memory updates.

Due to some issues (in the implementation or in app logic), it can happen
we try to create a sampler view of the resource while we haven't created the
VRAM resource. This hack creates the resource when we hit this case, which prevents
crashing, but doesn't help with the resource content.

This fixes several games crashing at launch.

Acked-by: Axel Davy <axel.davy@ens.fr>
Acked-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Stanislaw Halik <sthalik@misaki.pl>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: NineBaseTexture9: update sampler view creation

While previous code was having the correct behaviour in general,
this new code is more readable (without checking all gallium formats
manually) and has a more defined behaviour for depth stencil resources.

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Return D3DERR_INVALIDCALL when trying to create a texture of bad format

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: Fix crash when deleting non-implicit swapchain

The implicit swapchains are destroyed when the device instance is
destroyed. However for non-implicit swapchains, it is not the case,
and the application can have kept an reference on the swapchain
buffers to reuse them.

Fixes problems with battle.net launcher.

Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: CubeTexture: fix GetLevelDesc

This->surfaces contains the surfaces associated to the levels
and faces. This->surfaces[6*Level] is what we want here,
since it gives us a face descriptor for the level 'Level'.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: NineBaseTexture9: fix setting of last_layer

Use same similar settings as u_sampler_view_default_template

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Correctly advertise D3DPMISCCAPS_CLIPTLVERTS

The cap means D3DFVF_XYZRHW vertices will see clipping.
This is not the case when
PIPE_CAP_TGSI_VS_WINDOW_SPACE_POSITION is supported, since
it'll disable clipping.

Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix D3DRS_POINTSPRITE support

It's done by testing the existence of the point sprite output register *after* parsing the vertex shader.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Add new texture format strings

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Add missing c++ declaration for IDirect3DVolumeTexture9

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Additional defines to d3dtypes.h

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>

st/nine: Fix clip state logic

The clip state was reset everytime, incurring an overhead.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>

st/nine: query: remove unused variable (trivial)

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: David Heidelberg <david@ixit.cz>

nir: Fix setup of constant bool initializers.

brw_fs_nir has only seen scalar bools so far, thanks to vector splitting,
and the ralloc of in glsl_to_nir.cpp will *usually* get you a 0-filled
chunk of memory, so reading too large of a value will usually get you the
right bool value.  But once we start doing vector bools in a few commits,
we end up getting bad values.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir: Make an easier helper for setting up SSA defs.

Almost all instructions we nir_ssa_def_init() for are nir_dests, and you
have to keep from forgetting to set is_ssa when you do.  Just provide the
simpler helper, instead.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

glsl: Link glsl_test with pthreads library.

Otherwise pthread_mutex_lock will be an undefined reference
on OpenBSD.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88219
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>

scons: Add X11 include path if X11 is available.

Mac OS X XQuartz places X11 headers at /opt/X11/include.

This patch fixes this Mac OS X SCons build error.

  Compiling src/gallium/state_trackers/glx/xlib/glx_api.c ...
In file included from src/gallium/state_trackers/glx/xlib/glx_api.c:34:
include/GL/glx.h:30:10: fatal error: 'X11/Xlib.h' file not found
         ^

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

meta: Move loop declaration to top of block.

Fixes MSVC build.

Trvial.

i965/tex_subimage: use meta instead of the blitter for PBO TexSubImage

Reviewed-by: Neil Roberts <neil@linux.intel.com>

i965/tex_image: Use meta for instead of the blitter PBO TexImage and GetTexImage

Reviewed-by: Neil Roberts <neil@linux.intel.com>

i965/pixel_read: Use meta_pbo_GetTexSubImage for PBO ReadPixels

Since the meta path can do strictly more than the blitter path, we just
remove the blitter path entirely.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

meta: Add an implementation of GetTexSubImage for PBOs

Reviewed-by: Neil Roberts <neil@linux.intel.com>

meta: Add a BlitFramebuffers-based implementation of TexSubImage

This meta path, designed for use with PBO's, creates a temporary texture
out of the PBO and uses BlitFramebuffers to do the actual texture upload.

v2 Jason Ekstrand <jason.ekstrand@intel.com>:
 - Add support for handling simple packing options

v3 Jason Ekstrand <jason.ekstrand@intel.com>:
 - Refactor to split out the texture-from-pbo code
 - Rename to _mesa_meta_pbo_TexSubImage

Reviewed-by: Neil Roberts <neil@linux.intel.com>

formats: Use a hash table for _mesa_format_from_array_format

Going through the for loop every time has noticable overhead.  This fixes
things up so we only do that once ever and then just do a hash table lookup
which should be much cheaper.

v2 Jason Ekstrand <jason.ekstrand@intel.com>:
 - Use once_flag and call_once from c11/threads.h instead of pthreads

Reviewed-by: Neil Roberts <neil@linux.intel.com>

i965: Implement SetTextureStorageForBufferObject

Reviewed-by: Neil Roberts <neil@linux.intel.com>

i965: Apply the miptree offset to surface state for renderbuffers

Previously, we were completely ignoring the mt->offset field for
renderbuffers.  While it does have some alignment constraints, it is valid
to use it.  This patch adds the code to each of the 4 surface state setup
functions to handle it.

Reviewed-by: Neil Roberts <neil@linux.intel.com>

i965/mipmap_tree: Add a depth parameter to create_for_bo

Reviewed-by: Neil Roberts <neil@linux.intel.com>

mesa/dd: Add a function for creating a texture from a buffer object

Reviewed-by: Neil Roberts <neil@linux.intel.com>

glsl: do not allow interface block to have name already taken

Fixes currently failing Piglit case
   interface-blocks-name-reused-globally.vert

v2: combine var declaration with assignment (Ian)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

nir: Replace assert(0) with unreachable().

Fixes a couple of warnings in the process.

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

i965/vec4: Fix fprintf argument ordering.

Introduced in commit 3167a80b.

nir: Stop using designated initializers

Designated initializers with anonymous unions don't work in MSVC or
GCC < 4.6.  With a couple of constructor methods, we don't need them any
more and the code is actually cleaner.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88467
Reviewed-by: Connor Abbot <cwabbott0@gmail.com>

mesa: change assert to unreachable in two format functions

This fixes two problems reported by osc:
I: Program returns random data in a function
E: Mesa no-return-in-nonvoid-function ../../src/mesa/main/format_utils.c:180
E: Mesa no-return-in-nonvoid-function ../../src/mesa/main/glformats.c:2714

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>

nir: Add src and dest constructors

Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

mesa: Add assert to check number of vector elements

The below code crashes when vector_elements <= 0
Fixes Warray-bounds warnings

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: Fix some signed-unsigned comparison warnings

v2: s/unsigned int/unsigned/ in prog_optimize.c

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: remove comparisons that are always true

Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

nir: Add a nir_foreach_phi_src helper macro

Reviewed-by: Connor Abbott <cwabbott02gmail.com>

i965: Extract scalar region checking logic

There are currently 2 users of this functionality. I have 2 more users coming
up, and having a simple function makes the results much cleaner. The existing
interface semantics was proposed by Matt.

v2 (Ken): Rename to region_matches()/has_scalar_region().

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Add QWORD sizes to type_sz macro

GEN8 added the QWORD as a valid type for certain operations on the EU.
In order to calculate the number of registers used one must have the type
size as part of the equation. Quoting the formula in the code:

   regs_written = (dst.width * dst.stride * type_sz(dst.type) + 31) / 32;

Adding this separately for bisection since there is no simple way to add
an assert in the type_sz function.

NOTE: As a side note, I was confused for a while because it's impossible
to calculate the region, ie. registers needed, without vstride.  However,
at this point these are all part of the IR, and so no vstride must exist.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

vc4: Fix build since 8ed5305d28d9309d651dfec3fbf4349854694694

freedreno/a4xx: sysmem bypass

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno: update generated headers

Signed-off-by: Rob Clark <robclark@freedesktop.org>

radeonsi: Re-enable LLVM IR dumps

This was inadvertently disabled by
761e36b4caab4e8e09a4c2b1409a825902fc7d2c.

radeonsi/compute: Use relocs for scratch pointer rather than user sgprs v2

Instead of passing a pointer to the scratch buffer via user sgprs, we
now patch the shader with the buffer address using reloc information
from the LLVM generated ELF.

v2:
  - Make sure not to break older LLVM.

radeon: Teach radeon_elf_read() how to parse reloc information v3

v2:
  - Use strdup for copying reloc names.
  - Free reloc memory.

v3:
  - Add free_relocs parameter to radeon_shader_binary_free_members()