package/python-coherence: use pyasn1 instead of pyasn

The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.

We no longer need to depend on BR2_INSTALL_LIBSTDCPP as python-pyasn1
does not depend on it.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pysmb: use pyasn1 instead of pyasn

The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-service-identity: use pyasn1 instead of pyasn

The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/netsnmp: unix domain socket transport

The support for Unix domain socket transport was disabled as part of
the bump of netsnmp from 5.5 to 5.6 in commit
de642c9904b13914017af6f10db144d559d6bd0c, but with no apparent reason.

This support is needed to allow Unix socket based AgentX subagents to
connect to netsnmp, so let's re-enable it.

Signed-off-by: Ryan Steffens <ryan.steffens@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/nanopi_neo4: new defconfig

A defconfig for the nanopi_neo4 was added in
d1cd9cdf269488d6adeb0cc6d2250cf6ffe1b3ed, but then removed in
8af7b11bd8a95bc41e4de46f727f3b0afde465a4 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.

Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.

Compared to the previous defconfig, the following changes were done:

- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/nitrogen8mn: new defconfig

NXP i.MX8MNano based SBC with 1GB of LPDDR4 and 16GB eMMC.

More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-nano/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/nitrogen*: bump u-boot revision

Changelog:
- fix serial# variable creation for i.MX8MQ/MM/MN
- improve display selection
- fix fastboot support for boards with 1GB of RAM only
- add BD Nano board support

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/nitrogen*: bump kernel revision

Changelog:
- fix PMIC issue for i.MX8MMini
- add support for MCP25xxFD SPI to CAN chip
- fix external module build issue for GCC >= 9
- add BD Nano board support

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale/common/imx: add support for i.MX8M Nano

Almost identical as i.MX8M Mini, here are the differences:
- different ATF load address [1]
- different entry point [2]
- different ROM version (v2) [3]

[1] https://gitlab.denx.de/u-boot/u-boot/-/blob/v2020.04/board/freescale/imx8mn_evk/README
[2] https://gitlab.denx.de/u-boot/u-boot/-/blob/v2020.04/configs/imx8mn_ddr4_evk_defconfig#L22
[3] https://gitlab.denx.de/u-boot/u-boot/-/commit/b8f16834

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imx-mkimage: add support for i.MX8M Nano

This CPU uses the same tools to generate boot images as 8MQ/8MMini.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Erik Larsson <karl.erik.larsson@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/firmware-imx: add support for i.MX8M Nano

This CPU requires the same (LP)DDR training binaries as i.MX8M Mini.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Refik Tuzakli <tuzakli.refik@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx: add option for i.MX8M Nano

The i.MX8M Nano is slightly different from the i.MX8M Mini but very
close (pin to pin compatible).
Mainly the Nano version has no VPU and another GPU (GC7000UL).

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Refik Tuzakli <tuzakli.refik@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: fix gd extension dependencies and options

Due to migration to pkg-config in php 7.4, the detection of
library dependencies has been changed.

source from php.net:
--with-gd becomes --enable-gd
--with-png-dir has been removed. libpng is required.
--with-zlib-dir has been removed. zlib is required.
--with-freetype-dir becomes --with-freetype
--with-jpeg-dir becomes --with-jpeg

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: fix zip support

since php7.4, --enable-zip becomes --with-zip due to
migration to pkg-config.

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkcs11-helper: bump version to 1.26

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libdvdnav: fix build with gcc-4.8

Fixes:

  http://autobuild.buildroot.net/results/c9514368b98bc3a7f7ab92cb33c54bd3ffd9a232/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/swupdate: add basic systemd/sysv service

Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: enable gobject-introspection support

If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: add upstream fix for SIGTTOU

If tty_handler() resets terminal while pkttyagent is run in background job,
the process gets stopped by SIGTTOU. This impacts systemctl, hence it must
be blocked for a while and then the process gets killed anyway.

Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: add upstream memory leak fix

This patch fixes two small memory leaks.

Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/polkit: install service file

The default installed service file is missing a target, which causes preset-all
to not enable the service.

Add the service file to package/polkit with the addition of:

[Install]
WantedBy=multi-user.target

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cryptography: bump to version 2.9

We can remove CFLAGS="$(TARGET_CFLAGS) -pthread" as of upstream commit:
https://github.com/pyca/cryptography/commit/085382fb17a560dd11e4710077b63a26d5dcf05c

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/shairport-sync: bump to version 3.3.6

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale/mxs: specify the volume-label for vfat

Currently the volume-label for the vfat partition is a string with
the following pattern: 5934-861D.

Specify the volume-label as "boot" to make it easier to identify it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olpc_xo175: new defconfig

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/olpc_xo1: new defconfig

This defconfig supports the OLPC XO-1 platform.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/olpc: add common scripts and files for OLPC laptops

There are muliple generations of OLPC laptops, x86 ones based on
Geode, VIA and ARM based with Marvell Armada. All of boot with
OpenFirmware and share some peripherals.

This patch adds the common files.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: enable or1k support in host-qemu

This change enables host qemu support for or1k which among other
things allows to test this architecture in gitlab.

The or1k support was named or32 until Qemu 2.9.0 and then renamed or1k
in upstream commit [1]. Since we're already using Qemu 4.2.0, we use
the or1k name.

Tested using qemu_or1k_defconfig.

[1] https://git.qemu.org/?p=qemu.git;a=commit;h=4a09d0bb34ab030e09e87173b2e3ec0fd7616cff

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/selinux-python: bump to version 3.0

This is now Python 3.x only.

Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/checkpolicy: bump version to 3.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/semodule-utils: bump version to 3.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/restorecond: bump version to 3.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/policycoreutils: bump version to 3.0

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsepol: bump version to 3.0

Other changes:
  - Add policy version 32 as a default version of toolchains build with kernel
    headers 5.5 or later.

  - Add Help text for the above.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsepol: fix help text for BR2_PACKAGE_LIBSEPOL_POLICY_VERSION

The help text was wrong, as it didn't match the actual default values
we were specifying. Indeed, when we specify:

        default 31 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13
        default 30 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3

It means that the policy version 30 is supported starting from Linux
4.3 included, and that 31 is supported from Linux 4.13 included.

So we shouldn't have:

  > 4.3 <= 4.13    30
  > 4.13           31

but:

  >= 4.3 < 4.13    30
  >= 4.13          31

This patch fixes that for all versions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libsemanage: bump version to 3.0

Other changes:
  - Remove the Python2 check, as 3.0 has removed support for Python2.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libselinux: bump version to 3.0

Other changes:
  - Remove upstream patches.
  - Modify existing patches to work with 3.0.
  - Remove Python2 check, as 3.0 has removed Python2 support.

Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libssh: add patch to fix reported version

The released libssh package does wrongly reports the previous version.
This patch fixes the version field in the lib.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-treq: bump to version 20.3.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openrc: enable selinux support when libselinux is enabled

OpenRC suports SELinux, so there is no reason to forcibly disable it.

Notice this only allows OpenRC to perform the initial policy load and
set the enforcing mode. In order really use SELinux it's also
necessary to select refpolicy, which provides a policy, and
policycoreutils, which provides restorecon and other SELinux
utilities.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-dpkt: remove Python2 only dependency

python-dpkt supports both Python flavors.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/warp7: bump kernel and U-Boot version

Bump U-Boot to 2020.04 and kernel to version 5.6.3

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/wandboard: bump U-Boot and kernel versions

Bump U-Boot to version 2020.04 and kernel to 5.6.3.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/glorytun: bump version to 0.3.4

The hash of the license file has changed due to year update:

-Copyright (c) 2015-2019, Adrien Gallouët <adrien@gallouet.fr>
+Copyright (c) 2015-2020, Adrien Gallouët <adrien@gallouet.fr>

Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: security bump version to 7.4.5

Changelog: https://www.php.net/ChangeLog-7.php#7.4.5

Fixes CVE-2020-7067.

Removed patch applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua-lyaml: bump to version 6.2.5

diff LICENSE:
- Copyright (C) 2013-2019 Gary V. Vaughan
+ Copyright (C) 2013-2020 Gary V. Vaughan

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python{, 3}-mako: bump to version 1.1.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-crossbar: bump to version 20.4.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-autobahn: bump to version 20.4.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/prosody: bump to version 0.11.5

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fbgrab: bump to version 1.3.3

The pixfmt report bug has been fixed upstream.

Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-simpleaudio: bump to version 1.0.4

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-secretstorage: bump to version 3.1.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-psycopg2: bump to version 2.8.5

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-mbstrdecoder: bump to version 1.0.0

Commit hash change is due to line endings change not in upstream
git repo.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-more-itertools: bump to version 8.2.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-dataproperty: bump to version 0.48.1

Commit hash change is due to line endings change not in upstream
git repo.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-tabledata: bump to version 1.1.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python{3}-setuptools: bump to version 44.0.0

This is the latest version of setuptools that supports python2.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-requests: bump to version 2.23.0

Drop patch that is now upstream.

License hash change is due to date change in upstream commit:
https://github.com/psf/requests/commit/a29be8f9ccf13c887e0f8861c2a35fb5289b9e3f

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pyzmq: bump to version 19.0.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pycparser: bump to version 2.20

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pycairo: bump to version 1.19.1

License hash change is due to upstream commit:
https://github.com/pygobject/pycairo/commit/886ecfd5286a8af2202e521ef2d4d7fac18f1d6f

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sysrepo: drop unneeded dependencies

The following dependencies are no longer needed:
- libev
- libavl
- protobuf-c

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgit2: Bump to version 1.0.0

This version changes the required dependencies as well as introducing
new bundled ones...

- Switch to the tarball released by upstream.
- Start depending on httpparser, instead of using the bundled one.
- Force using regcomp instead of using a bundled pcre.
- Add license for a bundled wildmatch and sha1.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[yann.morin.1998@free.fr: reorder licenses; two spaces in hash file.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sysrepo: bump to version 1.4.2

- Align hashes to the new spacing convention
- Drop patches upstreamed applied

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libyang: bump to version 1.0.130

- Align hashes to the new spacing convention

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnetconf2: bump to version 1.1.7

- Align hashes to the new spacing convention

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/macchiatobin*: drop vendor defconfig, rename mainline defconfig

The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/solidrun_macchiatobin_mainline: bump Linux and U-Boot versions

Bump Linux to 5.6.3, U-Boot to 2020.01. New kernel and modules based
on arm64 defconfig do not fit into default size filesystem anymore.
So increase filesystem size to 120M.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libtirpc: bump to version 1.2.6

This fixes build on riscv64:

http://autobuild.buildroot.net/results/a334f774e95fb7805568fc3868d5cf1d790a6e73
http://autobuild.buildroot.net/results/9cf80bdd4d329788c89596b56205ef215ee09c35

There is also a fix for build with -fno-common (default for gcc-10)

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/acmesystems*: drop BR2_TARGET_ROOTFS_EXT2_LABEL options

BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/ext2: pass a default string to filesystem label

Currently the volume-label for the root filesystem partition is a string
wit the following pattern: ad09a287-46a9-4790-ba97-fbbb549e5e96.

Specify the volume-label as "rootfs" to make it easier to identify it.

Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale: specify the volume-label for FAT partition

Currently the volume-label for the vfat partition is a string with
the following pattern: 5934-861D.

Specify the volume-label as "boot" to make it easier to identify it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libid3tag: needs host-gperf

Since switch to debian in commit
210ccaef5784011bc035d0ae13611cb4e76f389f, host-gperf is needed to
generate frametype.c because debian/patches/add-m4-directory.patch
patches Makefile.am. As a side effect, libid3tag tries to generate
frametype.c from frametype.gperf due to following rule:

$(srcdir)/frametype.c: $(srcdir)/frametype.gperf Makefile.am
        cd $(srcdir) &&  \
        gperf -tCcTonD -K id -N id3_frametype_lookup -s -3 -k '*'  \
                frametype.gperf |  \
        sed -e 's/\(struct id3_frametype\);/\1/' |  \
        sed -e '/\$$''Id: /s/\$$//g' >frametype.c

If host-gperf is not available, frametype.c will be empty and build with
madplay will fail on:

configure:17243: checking for snd_pcm_open in -lasound
configure:17268: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/powerpc64-linux-gcc -o conftest -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=1  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  conftest.c -lasound  -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lasound  -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lid3tag  >&5
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64-buildroot-linux-gnu/8.3.0/../../../../powerpc64-buildroot-linux-gnu/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib/libid3tag.so: undefined reference to `id3_frametype_lookup'

Fixes:
 - http://autobuild.buildroot.org/results/15a8c7f6e34b26446179c04383719ea71495403e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnuradio: revert patch 003 removal

In commit 14476b7fcaf102dcc39b5d4919a4f08660f821de ("package/gnuradio:
bump to 3.8.1.0"), all gnuradio patches were dropped. However, it
turns out that the path
0003-gr-digital-glfsr.h-drop-boost-cstdint.hpp-and-use-cs.patch was
applied in gnuradio master branch but has not been backported to
maint-3.8.  So this patch can't be supressed as we are using gnuradio
3.8.1.0.

Fix:
  http://autobuild.buildroot.net/results/79a7dabc20016bcf11afe22e6a5691edbba2455b/
  http://autobuild.buildroot.net/results/7342833ebcc8f399d98ba05e63fce6b60403371e/
  http://autobuild.buildroot.net/results/1807c1b054623148f0a2e55dd998b0b428f48b47/

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-iptables: account for platform tag in extensions

EXT_SUFFIX in Python versions > 3.5 contains a platform tag which only applies
to cpython extensions. Given that ctypes.util.find_library does not work on the
target due to the absence of the underlying tools '.so' needs to be added as a
possible suffix for libraries to enable python-iptables to find the iptables
shared libraries.

Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-iptables: try known libc instead of find_library()

ctypes.util.find_library() depends on gcc and friends to detect the location of
a given shared library. Given that these are not available on the target and
that python-iptables depends on this functionality we need to work around this.
The SONAMEs of the libc are well known so we try the known ones for glibc,
uClibc and musl.

Fixes: https://bugs.busybox.net/show_bug.cgi?id=12271
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-iptables: add explicit dependency on dynamic libs

The package uses ctypes.CDLL extensively which only makes sense when dynamic
libraries are available.

Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/strace: fix build without fork

Fixes:
 - http://autobuild.buildroot.org/results/ffc81d3798379a9c34c7a708ebbdea27409f755d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkcs11-helper: needs dynamic library

pkcs11-helper unconditionally use dlfcn.h in lib/pkcs11h-core.c

Fixes:
 - http://autobuild.buildroot.org/results/3411074765312e67dab0f71876a254721911714f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xorgproto: bump version to 2020.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/comix-cursors: bump version to 0.9.1

Changelog: https://gitlab.com/limitland/comixcursors/-/blob/master/NEWS

Original repository was moved to gitlab.com, changed _SITE accordingly.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mbedtls: security bump to version 2.16.6

- Fix CVE-2020-10932: fix side channel in ECC code that allowed an
  adversary with access to precise enough timing and memory access
  information (typically an untrusted operating system attacking a
  secure enclave) to fully recover an ECDSA private key.
- Fix a potentially remotely exploitable buffer overread in a DTLS
  client when parsing the Hello Verify Request message.
- Fix bug in DTLS handling of new associations with the same parameters
  (RFC 6347 section 4.2.8): after sending its HelloVerifyRequest, the
  server would end up with corrupted state and only send invalid records
  to the client. An attacker able to send forged UDP packets to the
  server could use that to obtain a Denial of Service. This could only
  happen when MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE was enabled in
  config.h (which it is by default).

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/check: bump version to 0.14.0

Release notes: https://github.com/libcheck/check/releases/tag/0.14.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ccache: bump version to 3.7.9

Release notes: https://ccache.dev/releasenotes.html#_ccache_3_7_9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/btrfs-progs: bump version to 5.6

Changelog:
https://btrfs.wiki.kernel.org/index.php/Changelog#By_version_.28btrfs-progs.29

Removed patches applied upstream:
https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=9a03f6d41f8e6b3312dc0c87563d8dbd10eafafe
https://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=4b3e22e988c26c6c814f9ad3f50f493cd4d9dd2a

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/brltty: bump version to 6.1

Changelog: https://brltty.app/doc/ChangeLog.txt

Removed patches committed upstream:
https://github.com/brltty/brltty/commit/0414ad2b4e8978a14343d920a5a1f11da892eaf3
https://github.com/brltty/brltty/commit/a2e3aa25e8ef5044422aeeaa65968f97550b5e8d

Updated hash of README due to non-license related commits:
https://github.com/brltty/brltty/commits/master/README

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/botan: bump version to 2.14.0

Release notes: https://botan.randombit.net/news.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bitstream: bump version to 1.5

Release notes:
https://mailman.videolan.org/pipermail/bitstream-devel/2018-November/000116.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cbor2: bump to version 5.1.0

Add missing host-python-setuptools-scm dependency.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cbor2: needs host-python-setuptools-scm

Fixes:
  http://autobuild.buildroot.net/results/124e1e628c78449fbaa027d74ab871b36d782343/

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-jinja2: bump to version 2.11.2

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-influxdb: bump to version 5.3.0

As of upstream commit 3a5e6219a2b62af076caa4f37fab9258165ec266 msgpack
is now required.

License hash change is due to date update in upstream commit
cf83d1d429ecebb093f6eaab773bd41c251530ca.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-h2: bump to version 3.2.0

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flatbuffers: bump to version 1.12

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-engineio: bump to version 3.12.1

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-crossbar: bump to version 20.4.1

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-httplib2: bump to version 0.17.2

License hash change is due to httplib2 package version number update.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-certifi: bump to version 2020.4.5.1

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>