Trevor Saunders [Thu, 31 Mar 2016 23:49:05 +0000 (19:49 -0400)]
arm: change the type of a variable to bfd_reloc_code_real_type
It is only ever assigned values in the enum, and it is passed to functions that
expect the argument's type to be the enum.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-arm.c (do_t_branch): Change the type of reloc to
bfd_reloc_code_real_type.
Trevor Saunders [Sat, 2 Apr 2016 12:22:05 +0000 (08:22 -0400)]
bfin: simplify current_inputline
Its not used for anything outside of md_assemble () so it doesn't need to be
extern. While we are there we can replace free () and xmalloc () with
XRESIZEVEC which should be faster.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/bfin-parse.y (current_inputline): Remove definition.
* config/tc-bfin.c (md_assemble): Simplify use of current_inputline.
Trevor Saunders [Sat, 2 Apr 2016 11:57:10 +0000 (07:57 -0400)]
avr: simplify some option parsing with strcasecmp ()
Instead of canonicalizing the argument we can just use a case insensitive
compare.
gas/ChangeLog:
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-avr.c (md_parse_option): Use strcasecmp () to compare
strings.
Marcin Kościelnicki [Sun, 3 Apr 2016 12:25:25 +0000 (14:25 +0200)]
IPA: Fix build problem on !HAVE_GETAUXVAL
These files need AT_PHDR, which is defined in elf.h. If HAVE_GETAUXVAL
is set, it's implicitely included by sys/auxv.h. Include it manually
for the opposite case.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <elf.h> include.
* linux-ppc-ipa.c: Add <elf.h> include.
* linux-s390-ipa.c: Add <elf.h> include.
GDB Administrator [Sun, 3 Apr 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 2 Apr 2016 06:47:26 +0000 (17:17 +1030)]
PR19896, Segmentation fault on bad input
PR 19896
* read.c (assign_symbol): Consume rest of line after an error
rather than continuing to process the line.
GDB Administrator [Sat, 2 Apr 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Artemiy Volkov [Fri, 1 Apr 2016 15:00:59 +0000 (16:00 +0100)]
gdb: allow enumeration constants as second operand of BINOP_REPEAT
This patch adds support for TYPE_CODE_ENUM values to be supplied
as right-hand side operand of the BINOP_REPEAT (@) operator. The
following should now work:
enum {
sz = 17
};
int
main ()
{
int arr[sz + 1] = { 0 };
return 0; /* line 9 here */
}
(gdb) b 9
(gdb) r
(gdb) p arr@sz
$1 = {0 <repeats 17 times>}
(gdb)
A couple of tests is also included in this patch to demonstrate that it is
working as intended.
gdb/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
the type of BINOP_REPEAT's second operand.
gdb/testsuite/Changelog:
2016-04-01 Artemiy Volkov <artemiyv@acm.org>
PR gdb/19820
* gdb.base/printcmds.exp: Add artificial arrays tests.
Andrew Burgess [Mon, 28 Mar 2016 21:48:34 +0000 (22:48 +0100)]
gas/arc: Change 'LENGHT' to 'LENGTH'
Small spelling mistake in a #define, fixed in this commit.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Rename to...
(MAX_FLAG_NAME_LENGTH): ...this.
(struct arc_flags): Update to use MAX_FLAG_NAME_LENGTH.
* config/tc-arc.c (tokenize_flags): Likewise.
Alan Modra [Fri, 1 Apr 2016 06:38:45 +0000 (17:08 +1030)]
PR19886, --as-needed regression
This isn't perfect in checking whether libraries will be loaded since
elf_link_add_object_symbols doesn't recurse down DT_NEEDED links.
(That happens later in ld/emultempl/elf32.em after_open.) So in
effect this recursive check really only looks one level down the
DT_NEEDED tree. Which is enough for the most common case, and
libc.so/ld.so in particular.
PR 19886
* elflink.c (on_needed_list): Recursively check needed status.
(elf_link_add_object_symbols): Adjust.
Alan Modra [Fri, 1 Apr 2016 12:07:50 +0000 (22:37 +1030)]
Constify more
* cgen.c (weak_operand_overflow_check): Return const char*.
* messages.c (as_internal_value_out_of_range): Formatting.
(as_warn_value_out_of_range): Consify prefix param.
(as_bad_value_out_of_range): Likewise.
* read.c (s_errwarn): Constify msg..
(s_float_space, float_cons): ..and err.
* as.h (as_warn_value_out_of_range, as_bad_value_out_of_range,
ieee_md_atof, vax_md_atof): Update prototypes.
* tc.h (md_atof): Update prototype.
* config/atof-ieee.c (ieee_md_atof): Return const char*.
* config/atof-vax.c (vax_md_atof): Likewise.
* config/obj-elf.c (obj_elf_parse_section_letters): Constify bad_msg.
* config/tc-aarch64.c (md_atof): Return const char*.
* config/tc-alpha.c (s_alpha_section_name): Likewise.
(s_alpha_comm): Constify sec_name.
(section_name): Constify.
(s_alpha_section): Consify name..
(alpha_elf_section_letter): ..and ptr_msg param..
(md_atof): ..and return.
* config/tc-alpha.h (alpha_elf_section_letter): Update prototype.
* config/tc-arc.c (md_atof): Return const char*.
* config/tc-arm.c (md_atof): Likewise.
* config/tc-avr.c (md_atof): Likewise.
* config/tc-bfin.c (md_atof): Likewise.
* config/tc-cr16.c (md_atof): Likewise.
* config/tc-cris.c (md_atof): Likewise.
* config/tc-crx.c (md_atof): Likewise.
* config/tc-d10v.c (md_atof): Likewise.
* config/tc-d30v.c (md_atof): Likewise.
* config/tc-dlx.c (md_atof): Likewise.
* config/tc-epiphany.c (md_atof): Likewise.
* config/tc-fr30.c (md_atof): Likewise.
* config/tc-frv.c (md_atof): Likewise.
* config/tc-ft32.c (md_atof): Likewise.
* config/tc-h8300.c (md_atof): Likewise.
* config/tc-hppa.c (struct default_subspace_dict): Constify name.
(struct default_space_dict): Likewise.
(create_new_space): Constify name param.
(create_new_subspace): Likewise.
(is_defined_space, is_defined_subspace): Likewise.
(pa_parse_space_stmt): Constify space_name param.
(md_atof): Return const char*.
(pa_spaces_begin): Constify name.
* config/tc-i370.c (md_atof): Return const char*.
* config/tc-i386.c (md_atof): Likewise.
(x86_64_section_letter): Constify ptr_msg param.
* config/tc-i386.h (x86_64_section_letter): Update prototype.
* config/tc-i860.c (struct i860_it): Constify error.
(md_atof): Return const char*.
* config/tc-i960.c (md_atof): Likewise.
* config/tc-ia64.c (md_atof): Likewise.
(ia64_elf_section_letter): Constify ptr_msg param.
* config/tc-ia64.h (ia64_elf_section_letter): Update prototype.
* config/tc-ip2k.c (md_atof): Return const char*.
* config/tc-iq2000.c (md_atof): Likewise.
* config/tc-lm32.c (md_atof): Likewise.
* config/tc-m32c.c (md_atof): Likewise.
* config/tc-m32r.c (md_atof): Likewise.
* config/tc-m68hc11.c (md_atof): Likewise.
* config/tc-m68k.c (md_atof): Likewise.
* config/tc-mcore.c (md_atof): Likewise.
* config/tc-mep.c (md_atof): Likewise.
(mep_elf_section_letter): Constify ptr_msg param.
* config/tc-mep.h (mep_elf_section_letter): Update prototype.
* config/tc-metag.c (md_atof): Return const char*.
* config/tc-microblaze.c (md_atof): Likewise.
* config/tc-microblaze.h (md_atof): Delete prototype.
* config/tc-mips.c (mips_parse_argument_token): Constify err.
(md_atof): Return const char*.
* config/tc-mmix.c (md_atof): Likewise.
* config/tc-mn10200.c (md_atof): Likewise.
* config/tc-mn10300.c (md_atof): Likewise.
* config/tc-moxie.c (md_atof): Likewise.
* config/tc-msp430.c (md_atof): Likewise.
* config/tc-mt.c (md_atof): Likewise.
* config/tc-nds32.c (md_atof): Likewise.
* config/tc-nios2.c (md_atof): Likewise.
(nios2_elf_section_letter): Constify ptr_msg param.
* config/tc-nios2.h (nios2_elf_section_letter): Update prototype.
* config/tc-ns32k.c (md_atof): Return const char*.
* config/tc-or1k.c (md_atof): Likewise.
* config/tc-pdp11.c (struct pdp11_code): Constify error.
(md_atof): Return const char*.
* config/tc-pj.c (md_atof): Likewise.
* config/tc-ppc.c (md_atof): Likewise.
* config/tc-rl78.c (md_atof): Likewise.
* config/tc-rx.c (md_atof): Likewise.
* config/tc-s390.c (md_atof): Likewise.
* config/tc-score.c (s3_atof, md_atof): Likewise.
* config/tc-sh.c (md_atof): Likewise.
* config/tc-sparc.c (struct sparc_it): Constify error.
(md_atof): Return const char*.
* config/tc-spu.c (md_atof): Likewise.
* config/tc-tic30.c (md_atof): Likewise.
* config/tc-tic4x.c (md_atof): Likewise.
* config/tc-tic54x.c (md_atof): Likewise.
* config/tc-tic6x.c (md_atof): Likewise.
* config/tc-tilegx.c (md_atof): Likewise.
* config/tc-tilepro.c (md_atof): Likewise.
* config/tc-v850.c (parse_register_list, md_atof): Likewise.
* config/tc-vax.c (md_atof): Likewise.
* config/tc-visium.c (md_atof): Likewise.
* config/tc-xc16x.c (md_atof): Likewise.
* config/tc-xgate.c (md_atof): Likewise.
* config/tc-xstormy16.c (md_atof): Likewise.
* config/tc-xtensa.c (md_atof): Likewise.
* config/tc-z80.c (md_atof): Likewise.
* config/tc-z8k.c (md_atof): Likewise.
GDB Administrator [Fri, 1 Apr 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Marcin Kościelnicki [Thu, 31 Mar 2016 21:29:08 +0000 (23:29 +0200)]
gdbserver: Fix C++ build errors in tracepoint.c
These were introduced by
1cda1512689aabb36588a01370002632a0c8e560
and
a13c46966d308297a1273e35ccc807a3912d573d . One is a simple
missing cast, the other is const usage on global function pointers
exported from IPA: in C++, consts are static, and thus won't be
exported from the DSO (the build error was because of non-applicable
visibility("default")).
gdb/gdbserver/ChangeLog:
* tracepoint.c (gdb_collect_ptr): Remove const qualifier.
(get_raw_reg_ptr): Likewise.
(get_trace_state_variable_value_ptr): Likewise.
(set_trace_state_variable_value_ptr): Likewise.
(initialize_tracepoint): Cast alloc_jump_pad_buffer result to
char *.
Pedro Alves [Thu, 31 Mar 2016 18:28:47 +0000 (19:28 +0100)]
Add regression test for PR gdb/19858 (JIT code registration on attach)
This test would fail without the previous gdb/jit.c fix:
(gdb) attach 23031
Attaching to program: .../build/gdb/testsuite/outputs/gdb.base/jit/jit-main, process 23031
[...]
207 WAIT_FOR_GDB; i = 0; /* gdb break here 1 */
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: attach
set var wait_for_gdb = 0
(gdb) PASS: gdb.base/jit.exp: attach: one_jit_test-2: set var wait_for_gdb = 0
info function ^jit_function
All functions matching regular expression "^jit_function":
(gdb) FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit-main.c: Include unistd.h.
(ATTACH): Define to 0 if not already defined.
(wait_for_gdb, mypid): New globals.
(WAIT_FOR_GDB): New macro.
(MAIN): Set an alarm. Store the process's pid. Wait for GDB at
some breakpoint locations.
* gdb.base/jit.exp (clean_reattach, continue_to_test_location):
New procedures.
(one_jit_test): Add REATTACH parameter, and handle it. Use
continue_to_test_location.
(top level): Test attach, and adjusts calls to one_jit_test.
Pedro Alves [Thu, 31 Mar 2016 18:28:47 +0000 (19:28 +0100)]
Make gdb.base/jit.exp binaries unique
This testcase compiles the same program and library differently
multiple times using the same file names. Make them unique, to make
it easier to debug test problems.
gdb/testsuite/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
PR gdb/19858
* gdb.base/jit.exp (compile_jit_test): Add intro comment. Add
BINSUFFIX parameter, and handle it.
(top level): Adjust calls compile_jit_test.
Yichao Yu [Thu, 31 Mar 2016 18:28:47 +0000 (19:28 +0100)]
Fix PR gdb/19858: GDB doesn't register the JIT libraries on attach
Ref: https://sourceware.org/ml/gdb/2016-03/msg00023.html
GDB currently fails to fetch the list of already-registered JIT
modules on attach.
Nothing is calling jit_inferior_init, which is what is responsible for
walking the JIT object list at init time.
Despite the misleading naming, jit_inferior_created_hook ->
jit_inferior_init is only called when the inferior execs.
This regressed with the fix for PR gdb/13431 (
03bef283c2d3):
https://sourceware.org/ml/gdb-patches/2012-02/msg00023.html which
removed the inferior_created (jit_inferior_created_observer)
observer.
Adding an inferior_created observer back fixes the issue.
In turn, this exposes a bug in jit_breakpoint_re_set_internal as well,
which is returning the wrong result when we already have the
breakpoint at the right address.
gdb/ChangeLog:
2016-03-31 Yichao Yu <yyc1992@gmail.com>
PR gdb/19858
* jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
got the breakpoint at the right address.
(jit_inferior_created): New function.
(_initialize_jit): Install jit_inferior_created as
inferior_created observer.
Signed-off-by: Pedro Alves <palves@redhat.com>
Marcin Kościelnicki [Thu, 31 Mar 2016 13:49:25 +0000 (15:49 +0200)]
gdb/NEWS: Add mention of powerpc*-linux tracepoints.
gdb/ChangeLog:
* NEWS: Mention support for tracepoints on powerpc*-linux.
Marcin Kościelnicki [Mon, 14 Mar 2016 16:29:09 +0000 (17:29 +0100)]
gdbserver: Add emit_ops for powerpc.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* linux-ppc-low.c (emit_insns): New function.
(__EMIT_ASM, _EMIT_ASM, EMIT_ASM): New macros.
(ppc_emit_prologue): New function.
(ppc_emit_epilogue): New function.
(ppc_emit_add): New function.
(ppc_emit_sub): New function.
(ppc_emit_mul): New function.
(ppc_emit_lsh): New function.
(ppc_emit_rsh_signed): New function.
(ppc_emit_rsh_unsigned): New function.
(ppc_emit_ext): New function.
(ppc_emit_zero_ext): New function.
(ppc_emit_log_not): New function.
(ppc_emit_bit_and): New function.
(ppc_emit_bit_or): New function.
(ppc_emit_bit_xor): New function.
(ppc_emit_bit_not): New function.
(ppc_emit_equal): New function.
(ppc_emit_less_signed): New function.
(ppc_emit_less_unsigned): New function.
(ppc_emit_ref): New function.
(ppc_emit_const): New function.
(ppc_emit_reg): New function.
(ppc_emit_pop): New function.
(ppc_emit_stack_flush): New function.
(ppc_emit_swap): New function.
(ppc_emit_stack_adjust): New function.
(ppc_emit_call): New function.
(ppc_emit_int_call_1): New function.
(ppc_emit_void_call_2): New function.
(ppc_emit_if_goto): New function.
(ppc_emit_goto): New function.
(ppc_emit_eq_goto): New function.
(ppc_emit_ne_goto): New function.
(ppc_emit_lt_goto): New function.
(ppc_emit_le_goto): New function.
(ppc_emit_gt_goto): New function.
(ppc_emit_ge_goto): New function.
(ppc_write_goto_address): New function.
(ppc_emit_ops_impl): New static variable.
(ppc64v1_emit_prologue): New function.
(ppc64v2_emit_prologue): New function.
(ppc64_emit_epilogue): New function.
(ppc64_emit_add): New function.
(ppc64_emit_sub): New function.
(ppc64_emit_mul): New function.
(ppc64_emit_lsh): New function.
(ppc64_emit_rsh_signed): New function.
(ppc64_emit_rsh_unsigned): New function.
(ppc64_emit_ext): New function.
(ppc64_emit_zero_ext): New function.
(ppc64_emit_log_not): New function.
(ppc64_emit_bit_and): New function.
(ppc64_emit_bit_or): New function.
(ppc64_emit_bit_xor): New function.
(ppc64_emit_bit_not): New function.
(ppc64_emit_equal): New function.
(ppc64_emit_less_signed): New function.
(ppc64_emit_less_unsigned): New function.
(ppc64_emit_ref): New function.
(ppc64_emit_const): New function.
(ppc64v1_emit_reg): New function.
(ppc64v2_emit_reg): New function.
(ppc64_emit_pop): New function.
(ppc64_emit_stack_flush): New function.
(ppc64_emit_swap): New function.
(ppc64v1_emit_call): New function.
(ppc64v2_emit_call): New function.
(ppc64v1_emit_int_call_1): New function.
(ppc64v2_emit_int_call_1): New function.
(ppc64v1_emit_void_call_2): New function.
(ppc64v2_emit_void_call_2): New function.
(ppc64_emit_if_goto): New function.
(ppc64_emit_eq_goto): New function.
(ppc64_emit_ne_goto): New function.
(ppc64_emit_lt_goto): New function.
(ppc64_emit_le_goto): New function.
(ppc64_emit_gt_goto): New function.
(ppc64_emit_ge_goto): New function.
(ppc64v1_emit_ops_impl): New static variable.
(ppc64v2_emit_ops_impl): New static variable.
(ppc_emit_ops): New function.
(linux_low_target): Wire in ppc_emit_ops.
Marcin Kościelnicki [Thu, 10 Mar 2016 00:38:18 +0000 (01:38 +0100)]
gdbserver: Add powerpc fast tracepoint support.
gdb/gdbserver/ChangeLog:
2016-03-31 Wei-cheng Wang <cole945@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
PR/17221
* Makefile.in: Add powerpc-*-ipa.o
* configure.srv: Add ipa_obj for powerpc*-linux.
* linux-ppc-ipa.c: New file.
* linux-ppc-low.c: Added linux-ppc-tdesc.h, ax.h, tracepoint.h
includes.
(PPC_FIELD): New macro.
(PPC_SEXT): New macro.
(PPC_OP6): New macro.
(PPC_BO): New macro.
(PPC_LI): New macro.
(PPC_BD): New macro.
(init_registers_*): Move prototype to linux-ppc-tdesc.h.
(tdesc_*): Move declaration to linux-ppc-tdesc.h.
(ppc_get_hwcap): Rename to ppc_get_auxv and add type parameter.
(ppc_get_thread_area): New function.
(is_elfv2_inferior): New function.
(gen_ds_form): New function.
(GEN_STD): New macro.
(GEN_STDU): New macro.
(GEN_LD): New macro.
(GEN_LDU): New macro.
(gen_d_form): New function.
(GEN_ADDI): New macro.
(GEN_ADDIS): New macro.
(GEN_LI): New macro.
(GEN_LIS): New macro.
(GEN_ORI): New macro.
(GEN_ORIS): New macro.
(GEN_LWZ): New macro.
(GEN_STW): New macro.
(GEN_STWU): New macro.
(gen_xfx_form): New function.
(GEN_MFSPR): New macro.
(GEN_MTSPR): New macro.
(GEN_MFCR): New macro.
(GEN_MTCR): New macro.
(GEN_SYNC): New macro.
(GEN_LWSYNC): New macro.
(gen_x_form): New function.
(GEN_OR): New macro.
(GEN_MR): New macro.
(GEN_LWARX): New macro.
(GEN_STWCX): New macro.
(GEN_CMPW): New macro.
(gen_md_form): New function.
(GEN_RLDICL): New macro.
(GEN_RLDICR): New macro.
(gen_i_form): New function.
(GEN_B): New macro.
(GEN_BL): New macro.
(gen_b_form): New function.
(GEN_BNE): New macro.
(GEN_LOAD): New macro.
(GEN_STORE): New macro.
(gen_limm): New function.
(gen_atomic_xchg): New function.
(gen_call): New function.
(ppc_relocate_instruction): New function.
(ppc_install_fast_tracepoint_jump_pad): New function.
(ppc_get_min_fast_tracepoint_insn_len): New function.
(ppc_get_ipa_tdesc_idx): New function.
(the_low_target): Wire in the new functions.
(initialize_low_arch) [!__powerpc64__]: Don'it initialize 64-bit
tdescs.
* linux-ppc-tdesc.h: New file.
Marcin Kościelnicki [Sat, 12 Mar 2016 23:30:11 +0000 (00:30 +0100)]
IPA: Add alloc_jump_pad_buffer target hook.
Targets may have various requirements on the required location of the jump
pad area. Currently IPA allocates it at the lowest possible address,
so that it is reachable by branches from the executable. However, this
fails on powerpc, which has executable link address (0x10000000) much
larger than branch reach (+/- 32MiB).
This makes jump pad buffer allocation a target hook instead. The current
implementations are as follows:
- i386 and s390: Branches can reach anywhere, so just mmap it. This
avoids the linear search dance.
- x86_64: Branches have +/-2GiB of reach, and executable is loaded low,
so just call mmap with MAP_32BIT. Likewise avoids the linear search.
- aarch64: Branches have +-128MiB of reach, executable loaded at 4MiB.
Do a linear search from 4MiB-size downwards to page_size.
- s390x: Branches have +-4GiB of reach, executable loaded at 2GiB.
Do like on aarch64.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* linux-amd64-ipa.c: Add <sys/mman.h> include.
(alloc_jump_pad_buffer): New function.
* linux-i386-ipa.c (alloc_jump_pad_buffer): New function.
* linux-s390-ipa.c: Add <sys/mman.h> and <sys/auxv.h> includes.
(alloc_jump_pad_buffer): New function.
* tracepoint.c (getauxval) [!HAVE_GETAUXVAL]: New function.
(initialize_tracepoint): Delegate to alloc_jump_pad_buffer.
* tracepoint.h (alloc_jump_pad_buffer): New prototype.
(getauxval) [!HAVE_GETAUXVAL]: New prototype.
Andrew Burgess [Thu, 31 Mar 2016 13:16:10 +0000 (14:16 +0100)]
opcodes: Fix date in ChangeLog entry
Previous commit had wrong date on ChangeLog entry. Fixed.
Andrew Burgess [Thu, 24 Mar 2016 17:18:41 +0000 (17:18 +0000)]
opcodes/arc/nps: Fix some operand flags
Some operands accidentally had the ARC_OPERAND_NCHK flag (due to copy &
paste mistake), meaning the operand value was skipping the overflow
check before being inserted. This commit removes the unwanted flags.
opcodes/ChangeLog:
* arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and
NPS_R_SRC1.
Catalin Udma [Mon, 29 Feb 2016 14:16:19 +0000 (16:16 +0200)]
python: Use console format for output of gdb.execute command
When gdb is started in MI mode, the output of gdb.execute
command is in MI-format in case when it is executed from python stop
handler while for all other cases the output is in console-format.
To assure consistent output format, this is fixed by using the console
format for all python gdb command executions.
PR python/19743
gdb/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* python/python.c (execute_gdb_command): Use console uiout
when executing gdb command.
* utils.c (restore_ui_out_closure): New structure.
(do_restore_ui_out): New function.
(make_cleanup_restore_ui_out): Likewise.
* utils.h (make_cleanup_restore_ui_out): Declare.
gdb/testsuite/ChangeLog:
2016-03-31 Catalin Udma <catalin.udma@freescale.com>
PR python/19743
* gdb.python/py-mi-events-gdb.py: New file.
* gdb.python/py-mi-events.c: New file.
* gdb.python/py-mi-events.exp: New file.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
Pedro Alves [Thu, 31 Mar 2016 12:24:34 +0000 (13:24 +0100)]
Remove support for "target m32rsdi" and "target mips/pmon/ddb/rockhopper/lsi"
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.html
https://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
Trevor Saunders [Sun, 20 Mar 2016 01:48:35 +0000 (21:48 -0400)]
enable -Wwrite-strings for gas
We add a new AC_SUBST to warning.m4 so that the test if the warning is
supported is centralized, but the warning can be enabled per directory.
binutils/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
gprof/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
ld/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
opcodes/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
bfd/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
* warning.m4: Add WARN_WRITE_STRINGS AC_SUBST.
gold/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* configure: Regenerate.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* Makefile.am: Add WARN_WRITE_STRINGS to WARN_CFLAGS.
* Makefile.in: Regenerate.
* configure: Likewise.
Trevor Saunders [Sun, 20 Mar 2016 05:37:55 +0000 (01:37 -0400)]
make xtensa_section_rename () take const char *
Xtensa uses it in several macros passing it a literal string, so its convenient
for the argument type to be const char *. However some of the code in
symbols.c seems to assume tc_canonicalize_symbol_name () will return a non
const pointer, and some other target's implementations even modify the
argument, so it seems best to return a char * which means casting away const on
the argument when we return it instead of another string.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-xtensa.c (struct rename_section_struct): Make old_name
const.
(xtensa_section_rename): Make argument type const char *.
* config/tc-xtensa.h (xtensa_section_rename): Adjust.
Trevor Saunders [Thu, 24 Mar 2016 11:52:39 +0000 (07:52 -0400)]
tc-i960.c: add some casts when assigning literals to args[i]
parse_ldconst () takes a char ** as a in / out argument, and sometimes points
args[0] to a constant string. Then in some cases after parse_ldconst ()
returns md_assemble () twiddles the contents of arg[0]. So it seems like
it would take some work to avoid these casts, and its not really clear
that work is worth it.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_ldconst): Cast to char * when assigning to
args[0].
Trevor Saunders [Sun, 20 Mar 2016 05:13:05 +0000 (01:13 -0400)]
cast the arg to md_assemble () to char *
For these targets its not clear how md_assemble can usefully be split up so
that part can take const char *. There is also a fair number of targets that
need md_assemble () to take a char *, so we can't easily make the argument
const. So since there isn't many callers it seems easiest to just add a couple
of casts.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-m32c.c (m32c_md_end): cast the argument to md_assemble to
char *.
(m32c_indirect_operand): Likewise.
* config/tc-nds32.c (do_pseudo_b): Likewise.
(do_pseudo_bal): Likewise.
(do_pseudo_ls_bhw): Likewise.
Trevor Saunders [Mon, 22 Feb 2016 22:27:30 +0000 (17:27 -0500)]
cast to char * when assigning to optarg
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* as.c (parse_args): Cast literal to char * when assigning to optarg.
Trevor Saunders [Sun, 28 Feb 2016 22:21:12 +0000 (17:21 -0500)]
work around get_symbol_name () in sparc and ia64
get_symbol_name () returns a char * in a out arg, which means we need to cast
to assign a literal to the variable passed to get_symbol_name (). It seems
like better APIs than get_symbol_name () could be provided, but that seems like
a fair amount of work so just casting seems to be the betterthing to do for
now.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-ia64.c (md_assemble): Add temporary variable to pass to
get_symbol_name ().
* config/tc-sparc.c (s_register): Cast a literal to char * in
assignment.
Trevor Saunders [Mon, 22 Feb 2016 21:17:14 +0000 (16:17 -0500)]
cast literal to char * when assigning to input_line_ptr
various places either directly or indirectly set input_line_pointer to point at
a literal. Currently lots of places modify the string input_line_pointer
points at, so making it const isn't easy. Since most if not all of these
places assign to input_line_pointer to parse an expression it would probably be
best to add ways to generate and deal with expressions that doesn't involve
parsing strings, but for now adding some casts seems easiest.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-i960.c (parse_expr): Cast to char * when assigning to
input_line_pointer.
* config/tc-m32r.c (expand_debug_syms): Likewise.
* config/tc-msp430.c (msp430_dstoperand): Likewise.
* config/tc-z80.c (md_begin): Likewise.
* stabs.c (stabs_generate_asm_func): Likewise.
Alan Modra [Thu, 31 Mar 2016 04:32:14 +0000 (15:02 +1030)]
More cases of missing TO_ADDR in ldlang.c
and one extraneous occurrence.
* ldlang.c (TO_ADDR, TO_SIZE, opb_shift): Move earlier in file.
(lang_insert_orphan): Use TO_ADDR in __stop sym calculation.
(print_input_section): Don't use TO_ADDR when printing section
size.
(lang_size_sections_1): Use TO_ADDR in overlay lma calculation.
(lang_size_sections): Use TO_ADDR in relro end calculation.
Trevor Saunders [Sun, 27 Mar 2016 08:30:31 +0000 (04:30 -0400)]
get rid of K&R style args
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* cgen.c: Modernize the way functions declare arguments.
* config/tc-bfin.c: Likewise.
* config/tc-pdp11.c: Likewise.
* literal.c: Likewise.
* read.c: Likewise.
* stabs.c: Likewise.
Trevor Saunders [Sun, 27 Mar 2016 11:07:27 +0000 (07:07 -0400)]
make some variables unsigned
these places define char arrays containing values greater than 0x80 which
doesn't fit in an 8 bit signed char, but does fit in an unsigned one.
gas/ChangeLog:
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-aarch64.c (aarch64_handle_align): Make the type of some
variables unsigned char[].
* config/tc-alpha.c (alpha_handle_align): Likewise.
* config/tc-arm.c (arm_handle_align): Likewise.
* config/tc-z80.c: Likewise.
Cary Coutant [Thu, 31 Mar 2016 02:14:16 +0000 (19:14 -0700)]
Don't override definition a shared object by one in a later shared object.
In PR 16979, a reference to malloc is being resolved to an unversioned
reference in libmalloc.so. When linked with --as-needed, however, the
dynamic table does not list libmalloc.so as a DT_NEEDED library.
If we have a reference to an unversioned symbol in a shared object,
and we later see a versioned definition in another shared object, we
were overriding the first definition with the second in the process of
defining the default version. As a result, we no longer think that the
first shared object was actually needed to resolve any symbols, and we
don't list it as a DT_NEEDED library.
This patch fixes the problem by treating the two definitions as separate
symbols, so the second definition does not override the first.
2016-03-30 Cary Coutant <ccoutant@gmail.com>
gold/
PR gold/16979
* symtab.cc (Symbol_table::define_default_version): Check for case
where symbols are both in different shared objects.
GDB Administrator [Thu, 31 Mar 2016 00:00:09 +0000 (00:00 +0000)]
Automatic date update in version.in
Marcin Kościelnicki [Fri, 11 Mar 2016 14:51:29 +0000 (15:51 +0100)]
gdbserver/IPA: Export some functions via global function pointers.
On powerpc64, qSymbol for a function returns the function code address,
and not the descriptor address. Since we emit code calling gdb_collect
and some other functions, we need the descriptor (no way to know the
proper TOC address without it). To get the descriptor address, make
global function pointer variables in the IPA pointing to the relevant
functions and read them instead of asking for them directly via qSymbol.
gdb/gdbserver/ChangeLog:
* linux-aarch64-ipa.c: Rename gdb_agent_get_raw_reg to get_raw_reg.
* linux-amd64-ipa.c: Likewise.
* linux-i386-ipa.c: Likewise.
* linux-s390-ipa.c: Likewise.
* tracepoint.c: IPA-export gdb_collect_ptr instead of gdb_collect,
ditto for get_raw_reg_ptr, get_trace_state_variable_value_ptr,
set_trace_state_variable_value_ptr.
(struct ipa_sym_addresses): Likewise.
(symbol_list): Likewise.
(install_fast_tracepoint): Dereference gdb_collect_ptr instead of
accessing gdb_collect directly.
(gdb_collect_ptr_type): New typedef.
(get_raw_reg_ptr_type): New typedef.
(get_trace_state_variable_value_ptr_type): New typedef.
(set_trace_state_variable_value_ptr_type): New typedef.
(gdb_collect_ptr): New global.
(get_raw_reg_ptr): New global.
(get_trace_state_variable_value_ptr): New global.
(set_trace_state_variable_value_ptr): New global.
(get_raw_reg_func_addr): Dereference get_raw_reg_ptr instead of
accessing get_raw_reg directly.
(get_get_tsv_func_addr): Likewise for
get_trace_state_variable_value_ptr.
(get_set_tsv_func_addr): Likewise for
set_trace_state_variable_value_ptr.
* tracepoint.h: Rename gdb_agent_get_raw_reg to get_raw_reg.
Andrew Burgess [Wed, 30 Mar 2016 17:13:31 +0000 (18:13 +0100)]
opcodes/arc: Comment and whitespace fixes in opcode table
Add a new comment, and clean up some whitespace issues in the
instruction table.
opcode/ChangeLog:
* arc-nps400-tbl.h: Add a header comment, and fix some whitespace
issues. No functional changes.
Andrew Burgess [Wed, 30 Mar 2016 13:34:34 +0000 (14:34 +0100)]
ld/testing: Fix error and warning checks in run_dump_test
The options warning_output and error_output to the run_dump_test
function were incorrectly checking the return value from the regexp_diff
function, and so, as a result failing tests were showing as a pass.
Fixed in this commit.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Fix check of return
value from regexp_diff.
* testsuite/ld-elf/orphan-5.l: Fix expected output.
* testsuite/ld-elf/orphan-6.l: Likewise.
Yao Qi [Wed, 30 Mar 2016 16:02:46 +0000 (17:02 +0100)]
Check func against 0 rather than NULL
Variable 'func''s type is CORE_ADDR, so it should be compared with 0
rather than NULL. This causes a build error.
This patch fixes this.
gdb:
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
0 rather than NULL.
Yao Qi [Wed, 30 Mar 2016 15:44:24 +0000 (16:44 +0100)]
Add arm epilogue unwinder
Nowadays, GDB can't unwind successfully from epilogue on arm,
(gdb) bt
#0 0x76ff65a2 in shr1 () from /home/yao/Source/gnu/build/gdb/testsuite/gdb.reverse/shr1.sl
#1 0x0000869e in main () at /home/yao/Source/gnu/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.reverse/solib-reverse.c:34
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
(gdb) disassemble shr1
Dump of assembler code for function shr1:
....
0x76ff659a <+10>: adds r7, #12
0x76ff659c <+12>: mov sp, r7
0x76ff659e <+14>: ldr.w r7, [sp], #4
0x76ff65a2 <+18>: bx lr
End of assembler dump.
in this case, prologue unwinder is used. It analyzes the prologue and
get the offsets of saved registers to SP. However, in epilogue, the
SP has been restored, prologue unwinder gets the registers from the
wrong address, and even the frame id is wrong.
In reverse debugging, this case (program stops at the last instruction
of function) happens quite frequently due to the reverse execution.
There are many test fails due to missing epilogue unwinder.
This adds epilogue unwinder, but the frame cache is still get by
prologue unwinder except that SP is fixed up separately, because SP
is restored in epilogue.
This patch fixes many fails in solib-precsave.exp, and solib-reverse.exp.
gdb:
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
(arm_epilogue_frame_this_id): New function.
(arm_epilogue_frame_prev_register): New function.
(arm_epilogue_frame_sniffer): New function.
(arm_epilogue_frame_unwind): New.
(arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.
Yao Qi [Wed, 30 Mar 2016 15:44:24 +0000 (16:44 +0100)]
Refactor arm_stack_frame_destroyed_p
This patch is to refactor arm_stack_frame_destroyed_p, so that the code
can be used in both arm_stack_frame_destroyed_p and arm epilogue
unwinder I am going to add in the next patch. In fact, the code
is the same in two places, but checking whether it is thumb mode
is slightly different. arm_stack_frame_destroyed_p uses
arm_pc_is_thumb, and epilogue unwinder should use arm_frame_is_thumb.
gdb:
2016-03-30 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
(arm_stack_frame_destroyed_p_1): ... here. Don't call
arm_pc_is_thumb.
(arm_stack_frame_destroyed_p): Call
thumb_stack_frame_destroyed_p and
arm_stack_frame_destroyed_p_1.
Yao Qi [Wed, 30 Mar 2016 15:36:51 +0000 (16:36 +0100)]
Simplify gdb.reverse/until-reverse.c
Nowadays, functions fprintf, printf and malloc are executed in
gdb.reverse/until-reverse.c, so that it takes much time to record
instructions inside them. This may cause timeout, and we had several
fixes to bump the timeout,
https://sourceware.org/ml/gdb-patches/2012-02/msg00038.html
https://sourceware.org/ml/gdb-patches/2015-08/msg00186.html
also I still see this on arm-linux,
continue
Continuing.
Do you want to auto delete previous execution log entries when record/replay buffer becomes full (record full stop-at-limit)?([y] or n) n
Process record: stopped by user.
Program stopped.
0xf77021e6 in __linkin_atfork (newp=0xf7751748 <atfork_mem>) at ../nptl/sysdeps/unix/sysv/linux/register-atfork.c:117
117 ../nptl/sysdeps/unix/sysv/linux/register-atfork.c: No such file or directory.
(gdb) FAIL: gdb.reverse/until-precsave.exp: run to end of main (got interactive prompt)
however, I can't figure out how these functions (fprintf, printf and
malloc) are related to the test itself. marker1 is a function from
shared library too so we don't need these complicated libc functions
at all. IMO, recording the instructions in these libc functions has
nothing to do with the test itself except slow down the test. This
patch is to remove the usage of fprintf and printf, and also move
malloc to a dead code path.
gdb/testsuite:
2016-03-30 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/until-precsave.exp: Match function name only.
* gdb.reverse/until-reverse.c (main): Don't call fprintf nor printf.
Move malloc to a condition block.
* gdb.reverse/until-reverse.exp: Match function name only.
Nick Clifton [Wed, 30 Mar 2016 15:18:04 +0000 (16:18 +0100)]
Fix compile time warning about comparison between signed and unsigned values.
PR target/19880
* config/tc-arm.c (do_t_push_pop): Cast bitmask to unsigned before
shifting.
Simon Marchi [Wed, 30 Mar 2016 14:54:28 +0000 (10:54 -0400)]
gdbserver/tracepoint.c: Remove whitespace
gdb/gdbserver/ChangeLog:
* tracepoint.c (cmd_qtenable_disable): Remove whitespace.
Claudiu Zissulescu [Wed, 30 Mar 2016 14:21:25 +0000 (16:21 +0200)]
[ARC] Allow equ redefintion tests for ARC.
gas/
2016-03-30 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/all/gas.exp: Don't xfail on ARC.
* testsuite/gas/elf/elf.exp: Likewise.
* testsuite/gas/all/redef3.d: Allow execution for ARC.
Claudiu Zissulescu [Wed, 30 Mar 2016 14:09:56 +0000 (16:09 +0200)]
[ARC] Fix warn.exp test error.
gas/
2016-03-30 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/warn.exp: Fix matching pattern.
Claudiu Zissulescu [Wed, 30 Mar 2016 14:06:54 +0000 (16:06 +0200)]
[ARC] Cleanup AUX register names.
opcodes/
2016-03-30 Claudiu Zissulescu <claziss@synopsys.com>
* arc-regs.h (IC_RAM_ADDRESS, IC_TAG, IC_WP, IC_DATA, CONTROL0)
(AX2, AY2, MX2, MY2, AY0, AY1, DC_RAM_ADDR, DC_TAG, CONTROL1)
(RTT): Remove duplicate.
(LCDINSTR, LCDDATA, LCDSTAT, CC_*, PCT_COUNT*, PCT_SNAP*)
(PCT_CONFIG*): Remove.
(D1L, D1H, D2H, D2L): Define.
Senthil Kumar Selvaraj [Wed, 30 Mar 2016 13:52:26 +0000 (14:52 +0100)]
Fix a seg-fault in the AVR linker.
* elf32-avr.c (avr_elf32_load_records_from_section): Free
internal_relocs only if they aren't cached.
Nick Clifton [Wed, 30 Mar 2016 09:27:21 +0000 (10:27 +0100)]
Fix more bugs in AArch64 simulator.
* cpustate.c (aarch64_set_reg_s32): New function.
(aarch64_set_reg_u32): New function.
(aarch64_get_FP_half): Place half precision value into the correct
slot of the union.
(aarch64_set_FP_half): Likewise.
* cpustate.h: Add prototypes for aarch64_set_reg_s32 and
aarch64_set_reg_u32.
* memory.c (FETCH_FUNC): Cast the read value to the access type
before converting it to the return type. Rename to FETCH_FUNC64.
(FETCH_FUNC32): New macro. Duplicates FETCH_FUNC64 but for 32-bit
accesses. Use for 32-bit memory access functions.
* simulator.c (ldrsb_wb): Use sign extension not zero extension.
(ldrb_scale_ext, ldrsh32_abs, ldrsh32_wb): Likewise.
(ldrsh32_scale_ext, ldrsh_abs, ldrsh64_wb): Likewise.
(ldrsh_scale_ext, ldrsw_abs): Likewise.
(ldrh32_abs): Store 32 bit value not 64-bits.
(ldrh32_wb, ldrh32_scale_ext): Likewise.
(do_vec_MOV_immediate): Fix computation of val.
(do_vec_MVNI): Likewise.
(DO_VEC_WIDENING_MUL): New macro.
(do_vec_mull): Use new macro.
(do_vec_mul): Use new macro.
(do_vec_MLA): Read values before writing.
(do_vec_xtl): Likewise.
(do_vec_SSHL): Select correct shift value.
(do_vec_USHL): Likewise.
(do_scalar_UCVTF): New function.
(do_scalar_vec): Call new function.
(store_pair_u64): Treat reads of SP as reads of XZR.
Yao Qi [Wed, 30 Mar 2016 08:27:43 +0000 (09:27 +0100)]
Move CL entries from gdb/ChangeLog to gdb/testsuite/ChangeLog
Two ChangeLog entries in gdb/ChangeLog should be placed in
gdb/testsuite/ChangeLog. This patch moves them to the right
place.
Alan Modra [Wed, 30 Mar 2016 07:05:14 +0000 (17:35 +1030)]
PR18452, ld allows overlapping sections
PR 18452
* ldlang.c (maybe_overlays): New static var.
(lang_size_sections_1): Set it here.
(struct check_sec): New.
(sort_sections_by_lma): Adjust for array of structs.
(sort_sections_by_vma): New function.
(lang_check_section_addresses): Check both LMA and VMA for overlap.
* testsuite/ld-scripts/rgn-over7.d: Adjust.
Alan Modra [Wed, 30 Mar 2016 07:10:37 +0000 (17:40 +1030)]
Missing TO_ADDR
* ldlang.c (lang_size_sections_1): Correct code detecting a
backward non-overlapping move.
Alan Modra [Wed, 30 Mar 2016 07:09:36 +0000 (17:39 +1030)]
Use consistent test for .tbss sections in ldlang.c
Some places tested SEC_LOAD, others SEC_HAS_CONTENTS.
* ldlang.c (IS_TBSS): New macro, extracted from..
(IGNORE_SECTION): ..here.
(lang_size_sections_1): Use IS_TBSS and IGNORE_SECTION.
(lang_size_sections, lang_do_assignments_1): Use IS_TBSS.
Doug Evans [Wed, 30 Mar 2016 06:48:35 +0000 (23:48 -0700)]
python/py-utils.c (host_string_to_python_string): New function.
gdb/ChangeLog:
* python/py-utils.c (host_string_to_python_string): New function.
* python/python-internal.h (host_string_to_python_string): Declare it.
* python/py-*.c (*): Update all calls to
PyString_Decode (str, strlen (str), host_charset (), NULL);
to use host_string_to_python_string instead.
Trevor Saunders [Mon, 28 Mar 2016 10:29:47 +0000 (06:29 -0400)]
use xstrdup and friends more
gas/ChangeLog:
2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-hppa.c (pa_space): Use xstrdup where appropriate.
(pa_subspace): Likewise.
(create_new_space): Likewise.
(create_new_subspace): Likewise.
* config/tc-mips.c (mips_lookup_insn): Likewise.
* config/tc-tic4x.c (tic4x_asg): Likewise.
* config/tc-tic54x.c (tic54x_eval): Likewise.
(stag_add_field): Likewise.
(tic54x_usect): Likewise.
(tic54x_clink): Likewise.
(tic54x_set_default_include): Likewise.
(tic54x_include): Likewise.
(tic54x_message): Likewise.
(tic54x_sblock): Likewise.
(tic54x_var): Likewise.
(subsym_ismember): Likewise.
(subsym_substitute): Likewise.
* config/tc-xtensa.c (xg_replace_opname): Likewise.
(xg_translate_sysreg_op): Likewise.
(xg_translate_idioms): Likewise.
(md_assemble): Likewise.
(cache_literal_section): Likewise.
GDB Administrator [Wed, 30 Mar 2016 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Marcin Kościelnicki [Sat, 12 Mar 2016 13:03:26 +0000 (14:03 +0100)]
gdbserver: Handle 'v' packet while processing qSymbol.
On powerpc64, qSymbol query may require gdb to read a function
descriptor, sending a vFile packet to gdbserver. Thus, we need
to handle 'v' packet in look_up_one_symbol.
vFile replies may be quite long, and require reallocating own_buf.
Since handle_v_requests assumes the buffer is the static global own_buf
from server.c and reallocates it, we need to make own_buf global and
use it from look_up_one_symbol instead of using our own auto variable.
I've also done the same change in relocate_instruction, just in case.
On gdb side, in remote_check_symbols, rs->buf may be clobbered by vFile
handling, yet we need its contents for the reply (the symbol name is
stored there). Allocate a new buffer instead.
This broke fast tracepoints on powerpc64, due to errors in reading IPA
symbols.
gdb/ChangeLog:
* remote.c (remote_check_symbols): Allocate own buffer for reply.
gdbserver/ChangeLog:
* remote-utils.c (look_up_one_symbol): Remove own_buf, handle 'v'
packets.
(relocate_instruction): Remove own_buf.
* server.c (own_buf): Make global.
(handle_v_requests): Make global.
* server.h (own_buf): New declaration.
(handle_v_requests): New prototype.
Max Filippov [Sun, 27 Mar 2016 17:45:54 +0000 (20:45 +0300)]
gdb: xtensa: fix frame initialization when PC is invalid
When gdb is used on core dump and PC is not pointing to a readable
memory read_memory_integer call in the xtensa_frame_cache throws an
error, making register inspection/backtracing impossible in that thread.
Use safe_read_memory_integer instead.
2016-03-29 Max Filippov <jcmvbkbc@gmail.com>
gdb/
* xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
Use safe_read_memory_integer instead of read_memory_integer.
Marcin Kościelnicki [Tue, 29 Mar 2016 21:18:19 +0000 (23:18 +0200)]
gdb/NEWS: Add mention of s390*-linux tracepoints.
gdb/ChangeLog:
* NEWS: Mention support for tracepoints on s390*-linux.
Marcin Kościelnicki [Sun, 15 Nov 2015 01:52:34 +0000 (02:52 +0100)]
gdbserver/s390: Add support for compiled agent expressions.
These sequences assume a z900+ CPU, like the rest of fast tracepoint
support.
gdb/gdbserver/ChangeLog:
PR 18377
* linux-s390-low.c (add_insns): New function.
(s390_emit_prologue): New function.
(s390_emit_epilogue): New function.
(s390_emit_add): New function.
(s390_emit_sub): New function.
(s390_emit_mul): New function.
(s390_emit_lsh): New function.
(s390_emit_rsh_signed): New function.
(s390_emit_rsh_unsigned): New function.
(s390_emit_ext): New function.
(s390_emit_log_not): New function.
(s390_emit_bit_and): New function.
(s390_emit_bit_or): New function.
(s390_emit_bit_xor): New function.
(s390_emit_bit_not): New function.
(s390_emit_equal): New function.
(s390_emit_less_signed): New function.
(s390_emit_less_unsigned): New function.
(s390_emit_ref): New function.
(s390_emit_if_goto): New function.
(s390_emit_goto): New function.
(s390_write_goto_address): New function.
(s390_emit_litpool): New function.
(s390_emit_const): New function.
(s390_emit_call): New function.
(s390_emit_reg): New function.
(s390_emit_pop): New function.
(s390_emit_stack_flush): New function.
(s390_emit_zero_ext): New function.
(s390_emit_swap): New function.
(s390_emit_stack_adjust): New function.
(s390_emit_set_r2): New function.
(s390_emit_int_call_1): New function.
(s390_emit_void_call_2): New function.
(s390_emit_eq_goto): New function.
(s390_emit_ne_goto): New function.
(s390_emit_lt_goto): New function.
(s390_emit_le_goto): New function.
(s390_emit_gt_goto): New function.
(s390_emit_ge_goto): New function.
(s390x_emit_prologue): New function.
(s390x_emit_epilogue): New function.
(s390x_emit_add): New function.
(s390x_emit_sub): New function.
(s390x_emit_mul): New function.
(s390x_emit_lsh): New function.
(s390x_emit_rsh_signed): New function.
(s390x_emit_rsh_unsigned): New function.
(s390x_emit_ext): New function.
(s390x_emit_log_not): New function.
(s390x_emit_bit_and): New function.
(s390x_emit_bit_or): New function.
(s390x_emit_bit_xor): New function.
(s390x_emit_bit_not): New function.
(s390x_emit_equal): New function.
(s390x_emit_less_signed): New function.
(s390x_emit_less_unsigned): New function.
(s390x_emit_ref): New function.
(s390x_emit_if_goto): New function.
(s390x_emit_const): New function.
(s390x_emit_call): New function.
(s390x_emit_reg): New function.
(s390x_emit_pop): New function.
(s390x_emit_stack_flush): New function.
(s390x_emit_zero_ext): New function.
(s390x_emit_swap): New function.
(s390x_emit_stack_adjust): New function.
(s390x_emit_int_call_1): New function.
(s390x_emit_void_call_2): New function.
(s390x_emit_eq_goto): New function.
(s390x_emit_ne_goto): New function.
(s390x_emit_lt_goto): New function.
(s390x_emit_le_goto): New function.
(s390x_emit_gt_goto): New function.
(s390x_emit_ge_goto): New function.
(s390_emit_ops): New function.
(struct linux_target_ops): Fill in emit_ops hook.
Marcin Kościelnicki [Sun, 17 Jan 2016 21:59:06 +0000 (22:59 +0100)]
gdbserver/s390: Add fast tracepoint support.
Fast tracepoints will only work on 6-byte intructions, and assume at least
a z900 CPU. s390 also has 4-byte jump instructions, which also work on
pre-z900, but their range is limitted to +-64kiB, which is not very useful
(and wouldn't work at all with current jump pad allocation).
There's a little problem with s390_relocate_instruction function: it
converts BRAS/BRASL instructions to LARL of the return address + JG
to the target address. On 31-bit, this sets the high bit of the target
register to 0, while BRAS/BRASL would set it to 1. While this is not
a problem when the result is only used to address memory, it could
possibly break something that expects to compare such addresses for
equality without first masking the bit off. In particular, I'm not sure
whether leaving the return address high bit unset is ABI-compliant
(could confuse some unwinder?). If that's a problem, it could be fixed
by handling it in the jump pad (since at that point we can just modify
the GPRs in the save area without having to worry about preserving
CCs and only having that one GPR to work with - I'm not sure if it's
even possible to set the high bit with such constraints).
gdb/gdbserver/ChangeLog:
PR 18377
* Makefile.in: Add s390 IPA files.
* configure.srv: Build IPA for s390.
* linux-s390-ipa.c: New file.
* linux-s390-low.c: New includes - inttypes.h and linux-s390-tdesc.h.
(init_registers_s390_linux32): Move declaration to linux-s390-tdesc.h.
(tdesc_s390_linux32): Likewise.
(init_registers_s390_linux32v1): Likewise.
(tdesc_s390_linux32v1): Likewise.
(init_registers_s390_linux32v2): Likewise.
(tdesc_s390_linux32v2): Likewise.
(init_registers_s390_linux64): Likewise.
(tdesc_s390_linux64): Likewise.
(init_registers_s390_linux64v1): Likewise.
(tdesc_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(tdesc_s390_linux64v2): Likewise.
(init_registers_s390_te_linux64): Likewise.
(tdesc_s390_te_linux64): Likewise.
(init_registers_s390_vx_linux64): Likewise.
(tdesc_s390_vx_linux64): Likewise.
(init_registers_s390_tevx_linux64): Likewise.
(tdesc_s390_tevx_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(tdesc_s390x_linux64v2): Likewise.
(init_registers_s390x_te_linux64): Likewise.
(tdesc_s390x_te_linux64): Likewise.
(init_registers_s390x_vx_linux64): Likewise.
(tdesc_s390x_vx_linux64): Likewise.
(init_registers_s390x_tevx_linux64): Likewise.
(tdesc_s390x_tevx_linux64): Likewise.
(have_hwcap_s390_vx): New static variable.
(s390_arch_setup): Fill have_hwcap_s390_vx.
(s390_get_thread_area): New function.
(s390_ft_entry_gpr_esa): New const.
(s390_ft_entry_gpr_zarch): New const.
(s390_ft_entry_misc): New const.
(s390_ft_entry_fr): New const.
(s390_ft_entry_vr): New const.
(s390_ft_main_31): New const.
(s390_ft_main_64): New const.
(s390_ft_exit_fr): New const.
(s390_ft_exit_vr): New const.
(s390_ft_exit_misc): New const.
(s390_ft_exit_gpr_esa): New const.
(s390_ft_exit_gpr_zarch): New const.
(append_insns): New function.
(s390_relocate_instruction): New function.
(s390_install_fast_tracepoint_jump_pad): New function.
(s390_get_min_fast_tracepoint_insn_len): New function.
(s390_get_ipa_tdesc_idx): New function.
(struct linux_target_ops): Wire in the above functions.
(initialize_low_arch) [!__s390x__]: Don't initialize s390x tdescs.
* linux-s390-tdesc.h: New file.
Marcin Kościelnicki [Mon, 9 Nov 2015 13:52:13 +0000 (14:52 +0100)]
gdbserver/s390: Switch on tracepoint support.
Also adds s390 support to gdb.trace testsuite.
gdb/gdbserver/ChangeLog:
* linux-s390-low.c (s390_supports_tracepoints): New function.
(struct linux_target_ops): Fill supports_tracepoints hook.
gdb/testsuite/ChangeLog:
* gdb.trace/ftrace.exp: Set arg0exp for s390.
* gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
* gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
variable for GPR 0 instead of assuming it is register 0.
* gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
* lib/trace-support.exp: Add s390 registers.
Don Breazeal [Tue, 29 Mar 2016 17:27:43 +0000 (10:27 -0700)]
2016-03-29 Don Breazeal <donb@codesourcery.com>
* gdb/value.c (value_actual_type): Fix formatting issue.
Claudiu Zissulescu [Tue, 29 Mar 2016 17:05:31 +0000 (19:05 +0200)]
[ARC] Fix typo in extension instruction name.
opcodes/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-ext-tbl.h (dsp_fp_i2flt): Fix typo.
Yao Qi [Tue, 29 Mar 2016 13:52:48 +0000 (14:52 +0100)]
Compile gdb.arch/arm-neon.exp with debug info
Pass "debug" to prepare_for_testing otherwise, some tests fail.
gdb/testsuite:
2016-03-29 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-neon.exp: Pass debug to prepare_for_testing.
Claudiu Zissulescu [Tue, 29 Mar 2016 12:49:22 +0000 (14:49 +0200)]
[ARC] Add support for Quarkse opcodes.
gas/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/ext2op.d: New file.
* testsuite/gas/arc/ext2op.s: Likewise.
* testsuite/gas/arc/ext3op.d: Likewise.
* testsuite/gas/arc/ext3op.s: Likewise.
opcodes/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h (invld07): Remove.
* arc-ext-tbl.h: New file.
* arc-dis.c (FIELDA, FIELDB, FIELDC): Remove.
* arc-opc.c (arc_opcodes): Add ext-tbl include.
include/
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (insn_subclass_t): Add QUARKSE subclass.
(FIELDA, FIELDB, FIELDC, FIELDF, FIELDQ, INSN3OP, INSN2OP)
(INSN2OP, INSN3OP_ABC, INSN3OP_ALC, INSN3OP_ABL, INSN3OP_ALL)
(INSN3OP_0BC, INSN3OP_0LC, INSN3OP_0BL, INSN3OP_0LL, INSN3OP_ABU)
(INSN3OP_ALU, INSN3OP_0BU, INSN3OP_0LU, INSN3OP_BBS, INSN3OP_0LS)
(INSN3OP_CBBC, INSN3OP_CBBL, INSN3OP_C0LC, INSN3OP_C0LL)
(INSN3OP_CBBU, INSN3OP_C0LU, MINSN3OP_ABC, MINSN3OP_ALC)
(MINSN3OP_ABL, MINSN3OP_ALL, MINSN3OP_0BC, MINSN3OP_0LC)
(MINSN3OP_0BL, MINSN3OP_0LL, MINSN3OP_ABU, MINSN3OP_ALU)
(MINSN3OP_0BU, MINSN3OP_0LU, MINSN3OP_BBS, MINSN3OP_0LS)
(MINSN3OP_CBBC, MINSN3OP_CBBL, MINSN3OP_C0LC, MINSN3OP_C0LL)
(MINSN3OP_CBBU, MINSN3OP_C0LU, INSN2OP_BC, INSN2OP_BL, INSN2OP_0C)
(INSN2OP_0L INSN2OP_BU, INSN2OP_0U, MINSN2OP_BC, MINSN2OP_BL)
(MINSN2OP_0C, MINSN2OP_0L, MINSN2OP_BU, MINSN2OP_0U): Define.
Trevor Saunders [Sat, 27 Feb 2016 14:35:32 +0000 (09:35 -0500)]
make md_parse_option () take a const char *
This is mostly just adding const in many places, however there are a couple
interesting things. We need to add casts in tc-s390.c and tc-cris.c because
they have functions that assign to input_line_pointer an argument that
sometimes comes from md_parse_option. Presumably this is safe because those
targets never pass literals to md_parse_option (), but this code should
probably be improved in the future. Also xtensa passes the argument to strtoll
which is a rather odd function, it takes a const char * as argument and returns
a pointer into that string as a char * through an out argument, but we can work
around that by adding more variables.
gas/ChangeLog:
2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-aarch64.c (struct aarch64_long_option_table): Ad const
qualifier.
* config/tc-alpha.c (md_parse_option): Likewise.
* config/tc-arc.c (md_parse_option): Likewise.
* config/tc-arm.c (struct arm_long_option_table): Likewise.
(md_parse_option): Likewise.
* config/tc-avr.c (md_parse_option): Likewise.
* config/tc-bfin.c (md_parse_option): Likewise.
* config/tc-cr16.c (md_parse_option): Likewise.
* config/tc-cris.c (s_cris_arch): Likewise.
(md_parse_option): Likewise.
* config/tc-crx.c (md_parse_option): Likewise.
* config/tc-d10v.c (md_parse_option): Likewise.
* config/tc-d30v.c (md_parse_option): Likewise.
* config/tc-dlx.c (md_parse_option): Likewise.
* config/tc-epiphany.c (md_parse_option): Likewise.
* config/tc-fr30.c (md_parse_option): Likewise.
* config/tc-frv.c (md_parse_option): Likewise.
* config/tc-ft32.c (md_parse_option): Likewise.
* config/tc-h8300.c (md_parse_option): Likewise.
* config/tc-hppa.c (md_parse_option): Likewise.
* config/tc-i370.c (md_parse_option): Likewise.
* config/tc-i386.c (md_parse_option): Likewise.
* config/tc-i860.c (md_parse_option): Likewise.
* config/tc-i960.c (md_parse_option): Likewise.
* config/tc-ia64.c (md_parse_option): Likewise.
* config/tc-ip2k.c (md_parse_option): Likewise.
* config/tc-iq2000.c (md_parse_option): Likewise.
* config/tc-lm32.c (md_parse_option): Likewise.
* config/tc-m32c.c (md_parse_option): Likewise.
* config/tc-m32r.c (md_parse_option): Likewise.
* config/tc-m68hc11.c (md_parse_option): Likewise.
* config/tc-m68k.c (md_parse_option): Likewise.
* config/tc-mcore.c (md_parse_option): Likewise.
* config/tc-mep.c (md_parse_option): Likewise.
* config/tc-metag.c (struct metag_long_option): Likewise.
(md_parse_option): Likewise.
* config/tc-microblaze.c (md_parse_option): Likewise.
* config/tc-microblaze.h (md_parse_option): Remove prototype.
* config/tc-mips.c (md_parse_option): Adjust.
* config/tc-mmix.c (md_parse_option): Likewise.
* config/tc-mn10200.c (md_parse_option): Likewise.
* config/tc-mn10300.c (md_parse_option): Likewise.
* config/tc-moxie.c (md_parse_option): Likewise.
* config/tc-msp430.c (md_parse_option): Likewise.
* config/tc-mt.c (md_parse_option): Likewise.
* config/tc-nds32.c (md_parse_option): Likewise.
* config/tc-nds32.h (nds32_parse_option): Likewise.
* config/tc-nios2.c (md_parse_option): Likewise.
* config/tc-ns32k.c (md_parse_option): Likewise.
* config/tc-or1k.c (md_parse_option): Likewise.
* config/tc-pdp11.c (md_parse_option): Likewise.
* config/tc-pj.c (md_parse_option): Likewise.
* config/tc-ppc.c (md_parse_option): Likewise.
* config/tc-rl78.c (md_parse_option): Likewise.
* config/tc-rx.c (md_parse_option): Likewise.
* config/tc-s390.c (s390_parse_cpu): Likewise.
* config/tc-score.c (md_parse_option): Likewise.
* config/tc-sh.c (md_parse_option): Likewise.
* config/tc-sparc.c (md_parse_option): Likewise.
* config/tc-spu.c (md_parse_option): Likewise.
* config/tc-tic30.c (md_parse_option): Likewise.
* config/tc-tic4x.c (md_parse_option): Likewise.
* config/tc-tic54x.c (md_parse_option): Likewise.
* config/tc-tic6x.c (md_parse_option): Likewise.
* config/tc-tilegx.c (md_parse_option): Likewise.
* config/tc-tilepro.c (md_parse_option): Likewise.
* config/tc-v850.c (md_parse_option): Likewise.
* config/tc-vax.c (md_parse_option): Likewise.
* config/tc-visium.c (struct visium_long_option_table): Likewise.
* config/tc-xc16x.c (md_parse_option): Likewise.
* config/tc-xgate.c (md_parse_option): Likewise.
* config/tc-xstormy16.c (md_parse_option): Likewise.
* config/tc-xtensa.c (md_parse_option): Likewise.
* config/tc-z80.c (md_parse_option): Likewise.
* config/tc-z8k.c (md_parse_option): Likewise.
* tc.h (md_parse_option): Likewise.
Trevor Saunders [Tue, 29 Mar 2016 11:40:22 +0000 (07:40 -0400)]
apply ChangeLog for previous commit
Trevor Saunders [Mon, 28 Mar 2016 08:57:40 +0000 (04:57 -0400)]
replace some obstack_alloc () calls with the XOBNEW wrapper
gas/ChangeLog:
2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-bfin.c (gencode): Use XOBNEW obstack_alloc () wrapper.
* config/tc-hppa.c (fix_new_hppa): Likewise.
(pa_vtable_entry): Likewise.
(pa_vtable_inherit): Likewise.
* config/tc-m68k.c (md_begin): Likewise.
Nick Clifton [Tue, 29 Mar 2016 10:34:22 +0000 (11:34 +0100)]
Tidy up AArch64 simulator code.
* cpustate.c: Remove space after asterisk in function parameters.
* decode.h (greg): Delete unused function.
(vreg, shift, extension, scaling, writeback, condcode): Likewise.
* simulator.c: Use INSTR macro in more places.
(HALT_NYI): Use sim_io_eprintf in place of fprintf.
Remove extraneous whitespace.
Nick Clifton [Tue, 29 Mar 2016 09:24:16 +0000 (10:24 +0100)]
Relax assertion in BFIN linker to allow for discard GOT relocs.
PR 17334
* elf32-bfin.c (elf32_bfinfdpic_finish_dynamic_sections): Relax
assertion on the size of the got section to allow it to be bigger
than the number of relocs.
Alan Modra [Tue, 29 Mar 2016 06:41:46 +0000 (17:11 +1030)]
readelf printf format strings on mingw
* readelf.c (get_data): Use BFD_VMA_FMT to print bfd_size_type vars.
(get_dynamic_data): Likewise.
Toni Spets [Tue, 29 Mar 2016 03:55:23 +0000 (14:25 +1030)]
PE/COFF regression in base of code and data calculation
PR 19878
* coffcode.h (coff_write_object_contents): Revert accidental
2014-11-10 change.
Trevor Saunders [Thu, 24 Mar 2016 02:39:13 +0000 (22:39 -0400)]
add more const qualifiers
gas/ChangeLog:
2016-03-28 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/obj-elf.c (obj_elf_section_name): Return const char *.
* config/obj-elf.h (obj_elf_section_name): Adjust.
* config/tc-aarch64.c (aarch64_parse_features): Likewise.
(aarch64_parse_cpu): Likewise.
(aarch64_parse_arch): Likewise.
* config/tc-arm.c (arm_parse_extension): Likewise.
(arm_parse_cpu): Likewise.
(arm_parse_arch): Likewise.
* config/tc-nds32.c: Likewise.
* config/xtensa-relax.c (parse_special_fn): Likewise.
* stabs.c (generate_asm_file): Likewise.
GDB Administrator [Tue, 29 Mar 2016 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Mon, 28 Mar 2016 00:00:18 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Sun, 27 Mar 2016 23:09:56 +0000 (16:09 -0700)]
Fix failure to diagnose GOTOFF relocation to undef symbol in shared lib (i386).
gold/
PR gold/16111
* i386.cc (Target_i386): Add check for fully-resolved symbol for
R_386_GOTOFF.
GDB Administrator [Sun, 27 Mar 2016 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Trevor Saunders [Sun, 20 Mar 2016 05:21:48 +0000 (01:21 -0400)]
split up cr16s md_assemble ()
gas/ChangeLog:
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-cr16.c (cr16_assemble): New function.
(md_assemble): Call cr16_assemble.
Trevor Saunders [Fri, 25 Mar 2016 19:43:13 +0000 (15:43 -0400)]
rename flag_size_check to flag_allow_nonconst_size and make it a bool
This name describes what the variable means slightly better, and the enum with
two values that is only used for this one variable is kind of silly.
gas/ChangeLog:
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* as.c (parse_args): Adjust.
* as.h (flag_size_check): Rename to flag_allow_nonconst_size.
* config/obj-elf.c (elf_frob_symbol): Adjust.
GDB Administrator [Sat, 26 Mar 2016 00:00:16 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Fri, 25 Mar 2016 00:00:17 +0000 (00:00 +0000)]
Automatic date update in version.in
Jan Kratochvil [Thu, 24 Mar 2016 21:42:09 +0000 (22:42 +0100)]
More -Wstack-usage warnings: opcodes/aarch64-*
opcodes Fix -Wstack-usage warnings.
* aarch64-dis.c (print_operands): Substitute size.
* aarch64-opc.c (print_register_offset_address): Substitute tblen.
Jose E. Marchesi [Thu, 24 Mar 2016 17:28:41 +0000 (10:28 -0700)]
gas: sparc: allow ASR registers in the 0..31 range in V9 and later
In the SPARC V9 (and later) versions of the SPARC specification, the
section C.1.1 "Register Names" specifies that:
"asr_reg. An asr_reg is an Ancillary State Register name. It may have
one of the following values:
%asr16-%asr31"
The rationale of having this restriction was that the registers from 16
to 31 are reserved to implementations, and are therefore "non-V9". It
also assumes that the existing ASR registers in the range 0..31 will
have their own names such as %y, that can be used to access such
registers.
However, this is problematic. When a new ASR register is introduced,
such as %mcdper a.k.a. %asr14, it is useful to be able to use %asr14 in
order to not depend on the latest version of the assembler.
The Solaris assembler is lax and allows to assembly instructions
referring to %asr0 to %asr31. This patch makes the GNU assembler to
mimic that behavior.
gas/ChangeLog:
2016-03-24 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_ip): Remove the V9 restriction on ASR
registers to be in the 16..31 range.
Jose E. Marchesi [Thu, 24 Mar 2016 17:20:45 +0000 (10:20 -0700)]
sparc: reorder wr instructions in sparc_opcodes to fix diagnostics
This patch changes the location of several variants of the `wr'
instruction in sparc_opcodes. This is to get the assembler to emit the
right diagnostics when an invalid %asrN register is used in an
instruction.
Trevor Saunders [Sun, 20 Mar 2016 01:48:07 +0000 (21:48 -0400)]
make microblaze build with -Wwrite-strings
frag_var () assigns its last argument to frag::fr_opcode, and it turns out
some targets modify the string that points to. However it appears niether the
generic code or the microblaze code modifies what fr_opcode points to, so this
code should be safe. So we unfortunately need to cast to char * when passing
an argument to frag_var () but otherwise microblaze can itself point to these
strings with const char *.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-microblaze.c (md_assemble): Cast opc to char * when calling
frag_var ().
Trevor Saunders [Sat, 19 Mar 2016 11:38:46 +0000 (07:38 -0400)]
localize string returned from visium's md_atof ()
I'm not sure the string it returns is particularly useful, or better than the
string returned by other atof implementations on failure, but given the others
return a localized string it seems like this one should too.
gas/ChangeLog:
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-visium.c (md_atof): Localize the string returned on
failure.
Yao Qi [Thu, 24 Mar 2016 09:53:50 +0000 (09:53 +0000)]
Add quotation mark in test message
I happen to see a quotation mark is missing the following test,
gdb_test "break $end_location" \
"Breakpoint $decimal at .* line $end_location\." \
set breakpoint at end of main"
so the test result is
PASS: gdb.reverse/break-reverse.exp: set
This patch is to add the missing quotation mark back, and the test
result becomes
PASS: gdb.reverse/break-reverse.exp: set breakpoint at end of main
gdb/testsuite:
2016-03-24 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/break-reverse.exp: Add quotation mark in the
test message.
GDB Administrator [Thu, 24 Mar 2016 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Nick Clifton [Wed, 23 Mar 2016 17:37:30 +0000 (17:37 +0000)]
More AArch64 simulator improvements.
* cpustate.c (aarch64_get_FP_half): New function. Read a vector
register as a half precision floating point number.
(aarch64_set_FP_half): New function. Similar, but for setting
a half precision register.
(aarch64_get_thread_id): New function. Returns the value of the
CPU's TPIDR register.
(aarch64_get_FPCR): New function. Returns the value of the CPU's
floating point control register.
(aarch64_set_FPCR): New function. Set the value of the CPU's FPCR
register.
* cpustate.h: Add prototypes for new functions.
* sim-main.h (struct _sim_cpu): Add FPCR and tpidr fields.
* memory.c: Use unaligned core access functions for all memory
reads and writes.
* simulator.c (HALT_NYI): Generate an error message if tracing
will not tell the user why the simulator is halting.
(HALT_UNREACHABLE): Delete. Delete (unneeded) uses of the macro.
(INSTR): New time-saver macro.
(fldrb_abs): New function. Loads an 8-bit value using a scaled
offset.
(fldrh_abs): New function. Likewise for 16-bit values.
(do_vec_SSHL): Allow for negative shift values.
(do_vec_USHL): Likewise.
(do_vec_SHL): Correct computation of shift amount.
(do_vec_SSHR_USHR): Correct decision of signed vs unsigned
shifts and computation of shift value.
(clz): New function. Counts leading zero bits.
(do_vec_CLZ): New function. Implements CLZ (vector).
(do_vec_MOV_element): Call do_vec_CLZ.
(dexSimpleFPCondCompare): Implement.
(do_FCVT_half_to_single): New function. Implements one of the
FCVT operations.
(do_FCVT_half_to_double): New function. Likewise.
(do_FCVT_single_to_half): New function. Likewise.
(do_FCVT_double_to_half): New function. Likewise.
(dexSimpleFPDataProc1Source): Call new FCVT functions.
(do_scalar_SHL): Handle negative shifts.
(do_scalar_shift): Handle SSHR.
(do_scalar_USHL): New function.
(do_double_add): Simplify to just performing a double precision
add operation. Move remaining code into...
(do_scalar_vec): ... New function.
(dexLoadUnsignedImmediate): Call new fldrb_abs and fldrh_abs
functions.
(system_get): Add support for TPIDR, CTR, FPCR, FPSR and CPSR
registers.
(system_set): New function.
(do_MSR_immediate): New function. Stub for now.
(do_MSR_reg): New function. Likewise. Partially implements MSR
instruction.
(do_SYS): New function. Stub for now,
(dexSystem): Call new functions.
Yao Qi [Wed, 23 Mar 2016 11:21:20 +0000 (11:21 +0000)]
Remove comments on software_single_step in gdbarch.sh
This comment is out of date. We've already done that. Patch is to remove
it.
gdb:
2016-03-23 Yao Qi <yao.qi@linaro.org>
* gdbarch.sh (software_single_step): Remove comments.
* gdbarch.h: Regenerated.
GDB Administrator [Wed, 23 Mar 2016 00:00:23 +0000 (00:00 +0000)]
Automatic date update in version.in
Trevor Saunders [Sun, 20 Mar 2016 05:34:02 +0000 (01:34 -0400)]
make more variables const
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-h8300.c (h8300_elf_section): Add const qualifiers.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-m68hc11.c (md_begin): Likewise.
(print_opcode_list): Likewise.
* config/tc-msp430.c (msp430_section): Likewise.
* config/tc-score.c (struct s3_insn_to_dependency): Likewise.
(s3_build_dependency_insn_hsh): Likewise.
* config/tc-score7.c (struct s7_insn_to_dependency): Likewise.
(s7_build_dependency_insn_hsh): Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
(subsym_get_arg): Likewise.
* config/tc-xtensa.c (struct suffix_reloc_map): Likewise.
(get_directive): Likewise.
(cache_literal_section): Likewise.
* config/xtensa-relax.c: Likewise.
* symbols.c (symbol_create): Likewise.
(local_symbol_make): Likewise.
(symbol_relc_make_expr): Likewise.
include/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/i960.h: Add const qualifiers.
* opcode/tic4x.h (struct tic4x_inst): Likewise.
Trevor Saunders [Sun, 20 Mar 2016 05:07:55 +0000 (01:07 -0400)]
tc-pdp11.c: remove useless code
if the condition is true then we know that str already points to a'\0' in the
string passed to the function. Since we know the latter part of the function
doesn't modify that string, and str already points to a null byte there's no
point in changing str to point to a literal empty string.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-pdp11.c (md_assemble): Remove useless if and assignment to
str.
Trevor Saunders [Sun, 20 Mar 2016 05:36:16 +0000 (01:36 -0400)]
tc-sparc.c: get rid of wierd usage of strchr ()
This lets us avoid assigning a literal to a char *, and perhaps more
importantly makes it clearer what is going on here.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr ()
call with a switch.
Trevor Saunders [Sun, 28 Feb 2016 23:00:00 +0000 (18:00 -0500)]
use do_align () directly in tc-ia64.c
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-ia64.c (ia64_do_align): Remove.
(ia64_cons_align): Call do_align () directly.
(dot_proc): Likewise.
(stmt_float_cons): Likewise.
Trevor Saunders [Sun, 14 Feb 2016 03:00:07 +0000 (22:00 -0500)]
replace some raw xmalloc / xrealloc with the XNEW* macros
This increases consistancy of how we allocate memory, and always casting the
result to the proper type. It also helps make sure we get any use of sizeof on
the result type correct.
gas/ChangeLog:
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* listing.c (listing_message): Use XNEW style allocation macros.
* read.c (read_a_source_file): Likewise.
(read_symbol_name): Likewise.
(s_mri_common): Likewise.
(assign_symbol): Likewise.
(s_reloc): Likewise.
(emit_expr_with_reloc): Likewise.
(s_incbin): Likewise.
(s_include): Likewise.
* sb.c (sb_build): Likewise.
(sb_check): Likewise.
Nick Clifton [Tue, 22 Mar 2016 13:25:22 +0000 (13:25 +0000)]
Fix unbounded stack usage warning inside the SAFE_BYTE_GET macro.
PR 19851
binutils * dwarf.c (SAFE_BYTE_GET): Replace local dynamic array allocation
with run time size check.
Nick Clifton [Tue, 22 Mar 2016 12:25:08 +0000 (12:25 +0000)]
Improve COFF/PE linker garbage collection by preventing the removal of sections containing exported symbols.
PR ld/19803
* ldlang.c (lang_add_gc_name): New function. Adds the provided
symbol name to the list of gc symbols.
(lang_process): Call lang_add_gc_name with entry_symbol_default if
entry_symbol.name is NULL. Use lang_add_gc_name to add the init
and fini function names.
* pe-dll.c (process_def_file_and_drectve): Add exported names to
the gc symbol list.
* testsuite/ld-pe/pr19803.s: Do not export _testval symbol.
* testsuite/ld-pe/pr19803.d: Tweak expected output.
projects / binutils-gdb.git / log