Yann E. MORIN [Sat, 13 Jun 2015 16:46:36 +0000 (18:46 +0200)]
core/pkg-kconfig: run the kconfig fixups after exiting configurators
After we exit the configurators, we need to re-run the kconfig fixups to
ensure the user is not able to override them in the configurators.
Currently, we schedule that "for later", by removing the corresponding
stamp file, so make will run the fixups "later".
This means the user has access to the un-fixed .config file, which he
might decide to copy and use as a reference (not too bad, since we'd run
the fixups anyway; but not clean either).
Note that we still remove the stamp file before running the fixups, in
case any one of those fixups breaks, so we don't want to believe the
fixups have been applied; the fixup macro will touch that file anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:35 +0000 (18:46 +0200)]
core/pkg-kconfig: move the kconfig fixups to a macro
The same fixups will have to be done after leaving the configurators,
so we want to commonalise that code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:34 +0000 (18:46 +0200)]
core/pkg-kconfig: ensure kconfig base and fragment files exist
Even though we do have a dependency chain back to each of the kconfig
base and fragment files:
$$($(2)_DIR)/.config: $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES)
we can't rely on it to ensure they are all present, because they all have
this rule:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
but since this rule has no prerequisite (only build-order, but that does
not count in this case) and no recipe, make will believe each missing
file to be a PHONY target, and will always run targets that depend on
it:
https://www.gnu.org/software/make/manual/make.html#Force-Targets
So, that means a missing kconfig base or fragment file would always
cause the rule to generate .config to be run at each invocation, which
in turn would cause a rebuild of the kernel, which is clearly not what
we want.
Since this is expected make behaviour, we can well end up with a missing
Kconfig base or fragment. To avoid continuously rebuilding the kernel in
that case, we must check those files exist by ourselves, and error out
if any one of them is missing.
One would expect we check for them right in their dependency rule, like
so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
[ -f $(@) ] || {echo Missing $(@) >&2; exit 1; }
but that does not work, as only the first target is tested for. That
check msut be turned into a loop explicitly testing all files, like so:
$$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES): | $(1)-patch
for f in $$($(2)_KCONFIG_FILE) $$($(2)_KCONFIG_FRAGMENT_FILES); do \
[ -f $(@) ] || {echo Missing $$$${f} >&2; exit 1; }; \
done
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yann E. MORIN [Sat, 13 Jun 2015 16:46:33 +0000 (18:46 +0200)]
core/pkg-kconfig: extract package before using kconfig fragments
Kconfig fragments may be present in the package, so we need to extract
and patch it before we can use the fragments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Martin Bark [Sat, 27 Jun 2015 02:01:33 +0000 (03:01 +0100)]
package/nodejs: Bump version to 0.10.39
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:15:32 +0000 (08:15 -0300)]
iproute2: bump to version 4.1.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:23:02 +0000 (08:23 -0300)]
pure-ftpd: bump to version 1.0.41
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 27 Jun 2015 11:33:31 +0000 (08:33 -0300)]
gcc: bump 4.9.x series to version 4.9.3
Drop 110-pr64896.patch and 920-libgcc-remove-unistd-header.patch since
they're upstream.
Tweak 850-libstdcxx-uclibc-c99.patch for this new release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Romain Naour [Sun, 28 Jun 2015 11:00:28 +0000 (13:00 +0200)]
package/vlc: install vlc libraries in staging
Although no package seems to link against vlc libraries right now, these
libraries will be necessary for upcoming new efl emotion-generic-players
package.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nimai Mahajan [Fri, 26 Jun 2015 15:01:58 +0000 (11:01 -0400)]
libarchive: add hash and enable lzma support
Add libarchive hash. Enable lzma support.
Both xz and lzma support are provided by the xz library.
[Thomas: explicitly pass --with-lzma when xz is available.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:52 +0000 (21:59 +0200)]
package/opencv: add openmp support
Note that this situation is not ideal because it only add openmp support
to the Buildroot toolchain, not the external ones; but a couple of
packages already are in this situation.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:49 +0000 (21:59 +0200)]
package/opencv: add python support
opencv_python module needs python-numpy because it uses some numpy
headers in this wrapper.
>From its 2.4 release, OpenCV offers python bindings, but they required
most of the OpenCV modules to be enabled.
Since OpenCV-3.0.0, python bindings have been reworked:
- it now supports both python2 and python3
- only built modules supporting wrapped in python will be included in
the bindings.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:48 +0000 (21:59 +0200)]
package/opencv: disable all modules by default
This change allows to reduce the size of the default OpenCV package, so
the final root filesystem.
However, this will break any existing defconfig enabling OpenCV. Indeed,
a minimal OpenCV package will be built, whereas, prior to applying this
patches, a full-featured one would have been built instead.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:47 +0000 (21:59 +0200)]
package/opencv: reduce modules on by default
Since its integration into Buildroot, OpenCV always enables all modules
by default because the inter-module denpedency were not supported.
Now that OpenCV inter-module dependencies are correctly set at the
Buildroot configuration level, it is possible to reduce the enabled
module list to its minimal set, letting kconfig enable the other
modules.
This change will not change anything WRT a defconfig build with opencv.
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:46 +0000 (21:59 +0200)]
package/opencv: reword modules' prompt and help text
This patch is mostly cosmetic changes improving the human interface.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:45 +0000 (21:59 +0200)]
package/opencv: define modules inter-dependencies
OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).
However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.
This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:44 +0000 (21:59 +0200)]
package/gstreamer1/gst1-plugins-bad: disable opencv plugin with opencv-3
The opencv plugin uses stuff from the now removed opencv's legacy module.
Note that the configure script already correctly check the opencv version
and disable the opencv plugin with opencv-3.x.
Also remove 'select ...' to prevent kconfig from complaining about
recursive dependencies.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:43 +0000 (21:59 +0200)]
package/opencv: bump to version 3.0
This major version bump is in fact a bump from 2.4.10 to 2.4.11, then to
3.0.
OpenCV-2.4.11 improves a lot the Buildroot integration, including a
couple of patches that are no longer needed:
- x86 PIC code compilation fix in core module [1];
- return type fix in superes module [2];
- opencv.pc generation [3].
It also improves the gstreamer-0.10/1.x detection [4], that will be
needed in a follow-up patch.
OpenCV-3.0 still requires 2 patches (backported from upstream fixing
pthread support [5,6].
The OpenCV-3.0 does some major changes, for which a transition guide
has been published [7].
Among these changes coming with OpenCV-3.0, some new modules have been
introduced and others got removed; leading to a bunch of configure
option updates (to keep as much as possible an iso-functional-perimeter)
and the legacy menu has been updated too.
The worth noticing removals being:
- the opencv_legacy and opencv_nonfree modules no longer exist;
- the opencv_contrib module has moved out of the opencv base tree and
now has its own repository [8].
There is currently no plan to support it.
Some 3rd-party supports have been improved or added; their integrations
in Buildroot will be addressed in follow-up patches.
[1] https://github.com/Itseez/opencv/commit/
ea50be0529c248961e1b66293f8a9e4b807294a6
[2] https://github.com/Itseez/opencv/commit/
2e393ab83362743ba1825ad4b31d4a2925c606b4
[3] https://github.com/Itseez/opencv/commit/
eceada586bbf18fc267e437522ec4f1f23ddc656
[4] https://github.com/Itseez/opencv/commit/
38bb0db9dbec08666c8a64b3e4ead8fadf15c980
[5] https://github.com/Itseez/opencv/commit/
1f983ec39c97298b0c8ce409a1cc229ecf14e55c
[6] https://github.com/Itseez/opencv/commit/
a482dcce464acbd5368fb93c6c3d52ba8401776a
[7] http://docs.opencv.org/master/db/dfa/tutorial_transition_guide.html
[8] https://github.com/itseez/opencv_contrib
[Thomas:
- address most contents made by Yann E. Morin on the Config.in file.]
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samuel Martin [Thu, 25 Jun 2015 19:59:42 +0000 (21:59 +0200)]
package/opencv: alphabetically sorted each _CONF_OPTS group
No new option added nor removed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nimai Mahajan [Fri, 26 Jun 2015 14:19:43 +0000 (10:19 -0400)]
libucl: new package
Libucl is a high performance and flexible JSON/YAML/etc. parser for C.
https://github.com/vstakhov/libucl
[Thomas:
- remove hash file, should not be used for github downloads
- rewrap Config.in help text
- remove trailing white space in Config.in.
- add missing host-pkgconf dependency, without which the package
doesn't autoreconf properly.
- fix license: it is BSD-2c, not just BSD.]
Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Peter Korsgaard [Fri, 26 Jun 2015 08:14:12 +0000 (10:14 +0200)]
orc: bump version
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 17:09:42 +0000 (14:09 -0300)]
heimdal: bump to version 1.6rc2
Helps drop some patches and hence autoreconf saving time.
Also allows parallel builds.
And fixes:
http://buildroot-busybox.
2317881.n4.nabble.com/PATCH-v2-heimdal-explicitly-set-lpthread-td99422.html
without the need to hardcode libraries (disables/withouts weren't enough
though i've added them anyway for correctness).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 17:57:42 +0000 (14:57 -0300)]
ipset: bump to version 6.25.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 18:52:08 +0000 (15:52 -0300)]
dosfstools: bump to version 3.0.28
Change to new homepage since maintainer changed as well.
Add hash file based on tarball signature file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 18:52:37 +0000 (15:52 -0300)]
openswan: bump to version 2.6.43
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 22:35:07 +0000 (19:35 -0300)]
mpd-mpc: bump to version 0.27
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 22:35:06 +0000 (19:35 -0300)]
mpd: bump to version 0.19.10
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 21:53:02 +0000 (18:53 -0300)]
collectd: bump to version 5.5.0
Lots of new plugins!
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Thu, 25 Jun 2015 19:52:14 +0000 (21:52 +0200)]
libconfig: bump to 1.5
Add hash file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Thu, 25 Jun 2015 21:13:46 +0000 (18:13 -0300)]
rrdtool: add hash
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Thu, 25 Jun 2015 13:28:06 +0000 (15:28 +0200)]
system/device_table.txt: drop unused ifupdown post-up.d / pre-down.d directories
These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).
So drop them as they only cause confusion.
grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
if (!execute_all(iface, "pre-up")) return 0;
if (!execute_all(iface, "up")) return 0;
if (!execute_all(iface, "down")) return 0;
if (!execute_all(iface, "post-down")) return 0;
grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
if (!execute_scripts(iface, doit, "pre-up"))
if (!execute_scripts(iface, doit, "up"))
if (!execute_scripts(iface, doit, "down"))
if (!execute_scripts(iface, doit, "post-down"))
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
David du Colombier [Thu, 11 Jun 2015 09:01:44 +0000 (11:01 +0200)]
x264: bump to version
20150223-2245-stable
Use the Git repository instead of the snapshots,
since they are not generated anymore.
Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Wed, 24 Jun 2015 18:39:19 +0000 (15:39 -0300)]
ulogd: bump to version 2.0.5
Remove kernel headers check since it now implements local definitions to
keep working with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cédric Marie [Tue, 23 Jun 2015 21:36:06 +0000 (23:36 +0200)]
Makefile: Don't export VERBOSE unless V=1 (for CMake)
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 24 Jun 2015 07:20:43 +0000 (09:20 +0200)]
gcc: bump 4.8.x version
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Baruch Siach [Tue, 23 Jun 2015 17:21:20 +0000 (20:21 +0300)]
gpsd: fix build with musl
Add a patch adding missing include.
Fixes:
http://autobuild.buildroot.net/results/493/
493ddaf63f41918d718b5c26e2db258c67dba0a6/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 23 Jun 2015 17:04:58 +0000 (19:04 +0200)]
uclibc: add libgcc_s_resume fix
This commit adds a fix for building uClibc 0.9.33.2 and uClibc-ng
1.0.3 with gcc 5.1 on ARM, since we're about to add support for gcc
5.1.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
James Knight [Fri, 19 Jun 2015 17:19:12 +0000 (13:19 -0400)]
sudo: add optional pam support
Configure the sudo utility to support PAM if the framework is enabled.
[Peter: use install -D, reword commit message]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gergely Imreh [Mon, 22 Jun 2015 08:28:09 +0000 (08:28 +0000)]
pinentry: add patch to fix ncursesw include path
Upstream pinentry seems to assume a fixed include path for ncursesw,
while still using pkg-config to check what that path should be.
This results in detecting the library during config failing to include
it correctly during build.
Fixes:
http://autobuild.buildroot.org/results/d8d/
d8d33efd16cc94dc9d9d4b2d7615a0abb5752ee4/
http://autobuild.buildroot.org/results/c48/
c4805785077e955c61f246d0e4d8416d8dbd10b1/
http://autobuild.buildroot.org/results/144/
14483d35ab5009e854c7ce86e26942fdefd5c1f0
and bunch of others.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Baruch Siach [Tue, 23 Jun 2015 10:47:55 +0000 (13:47 +0300)]
libnspr: needs dynamic library support
The only package selecting libnspr (libnss) requires dynamic library already.
Fixes:
http://autobuild.buildroot.net/results/296/
296bc0fd888a43700d2ea020f8486932c5d37760/
http://autobuild.buildroot.net/results/a65/
a65588aa91a87f9a3d8af2a485de2df3e30cfc19/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Tue, 23 Jun 2015 10:38:17 +0000 (07:38 -0300)]
linux-headers: bump 3.{10, 14}.x and 4.0.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Albert Lee [Mon, 22 Jun 2015 22:10:12 +0000 (18:10 -0400)]
package/perl: Fix typos in HOSTCC specification
Signed-off-by: Albert Lee <trisk@omniti.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 14 Jun 2015 14:33:31 +0000 (16:33 +0200)]
toolchain-buildroot: mark eglibc as deprecated
eglibc is a dead project and has not been making any release since a
while, now that glibc is back and kicking. So let's deprecated our
eglibc support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 14 Jun 2015 14:33:30 +0000 (16:33 +0200)]
gdb: bump 7.9 series to 7.9.1
Note that both gdb 7.9 and 7.9.1 fail to build in a chroot without
texinfo, due to the infamous makeinfo issue. This should be fixed
separately.
[Peter: fixup white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 14 Jun 2015 14:33:29 +0000 (16:33 +0200)]
gcc: switch to gcc 4.9 as the default version
Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 14 Jun 2015 14:33:28 +0000 (16:33 +0200)]
gcc: add support for gcc 5.1
This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:
* Kept as is, sometimes after minor adjusments:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
850-libstdcxx-uclibc-c99.patch
860-cilk-wchar.patch
* Dropped:
110-pr64896.patch
111-pr65730.patch
* Split in multiple parts:
900-musl-support.patch
The patches from Crosstool-NG for muls support are used instead of
one single patch.
* Renamed:
910-gcc-poison-system-directories.patch to
200-gcc-poison-system-directories.patch
920-libgcc-remove-unistd-header.patch to
201-libgcc-remove-unistd-header.patch
Since the 9xx part of the series is now used by the various musl
related patches.
We have tested the following configurations, with a minimal Busybox
system:
* ARM, uClibc-ng
* ARM, glibc
* ARM, musl
* x86, uClibc-ng and uClibc 0.9.33.2
* x86, glibc
* x86, musl
All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:
devtmpfs: mounted
Freeing unused kernel memory: 300K (
c1389000 -
c13d4000)
init[1]: segfault at 0 ip
b77708c1 sp
bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[
b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Sun, 14 Jun 2015 14:33:26 +0000 (16:33 +0200)]
uclibc: bump uClibc-ng to 1.0.3
This commit bumps uClibc-ng to the latest version, and drops the two
patches that have been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Tue, 16 Jun 2015 21:36:11 +0000 (23:36 +0200)]
python: bump to 2.7.10
Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.
[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jerzy Grzegorek [Mon, 22 Jun 2015 06:38:18 +0000 (08:38 +0200)]
package: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 22 Jun 2015 20:16:20 +0000 (17:16 -0300)]
qemu/configs: update to latest kernel
Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Mon, 22 Jun 2015 18:59:31 +0000 (20:59 +0200)]
package/pinentry: fix build with Qt4
Help configure find the correct moc, as the comment in m4/qt.m4 states:
#configure tried to run $ac_cv_path_moc and the test didn't
#succeed. If configure shouldn't have tried this one, set
#the environment variable MOC to the right one before running
#configure.
Fixes:
http://autobuild.buildroot.org/results/06c/
06c5c2762ec22271fec20a6d15548011e40875d1
http://autobuild.buildroot.org/results/0d7/
0d78a2ff8c952cd104794f5049b07216978fdf11
http://autobuild.buildroot.org/results/af8/
af8f7f588dfa64d82c98a4b42ec78fd17dde137c
Also fixes using the host moc:
http://autobuild.buildroot.org/results/836/
836962f23dcad77b145fcdfeffb40e38e64d6971
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 22 Jun 2015 20:00:00 +0000 (17:00 -0300)]
btrfs-progs: bump to version 4.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 22 Jun 2015 19:17:03 +0000 (16:17 -0300)]
imagemagick: bump to version 6.9.1-6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 22 Jun 2015 19:16:19 +0000 (16:16 -0300)]
tiff: security bump to version 4.0.4
Fixes:
CVE-2014-8128 - Check memory allocations for failure. Also check
multiplication overflow.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Mon, 22 Jun 2015 19:42:54 +0000 (21:42 +0200)]
gst1-plugins-bad: fix egl detection
Some egl implementations needs special compiler flags or defines (E.G.
mesa3d for wayland needs to pass -DMESA_EGL_NO_X11_HEADERS to not try to
include X11 headers). This is correctly included in the .pc file, but the
configure logic doesn't use pkg-config so help it along.
Likewise, some implementations may need to link against other libraries, so
also pass LIBS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Benoît Thébaudeau [Thu, 28 May 2015 14:44:54 +0000 (16:44 +0200)]
gst1-plugins-bad: add support for opengl
Commit
83e29f2656a237e2c300d523776868837d3bc646 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration option for the
eglglessink plugin as a consequence of its removal in 1.3.1. However,
that commit did not add support for glimagesink, the plugin element to
be used as a replacement, which broke support for the EGL/GLES video
sink feature in Buildroot.
This new commit adds support for the OpenGL library and the
corresponding gl plugin, including the glimagesink element among others.
The plugin needs the library, but the library can also be used
separately in order to link custom plugins or applications against it.
The library needs at least one OpenGL API, one OpenGL platform and one
compatible window system. The implementations of these requirements that
Buildroot can currently provide are:
- APIs: OpenGL, OpenGL ES 2.X,
- platforms: GLX, EGL,
- window systems: X11, Wayland, Dispmanx.
The wayland configure feature switch is shared between the corresponding
OpenGL library window system and the waylandsink plugin.
This has been tested with videotestsrc/omxmpeg4videodec/omxh264dec and
glimagesink on the Raspberry Pi, using OpenGL ES 2.X, EGL and Dispmanx.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gustavo Zacarias [Mon, 22 Jun 2015 13:11:05 +0000 (10:11 -0300)]
linux: bump default to version 4.1
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Mon, 22 Jun 2015 13:11:04 +0000 (10:11 -0300)]
linux-headers: add 4.1.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Mon, 22 Jun 2015 13:11:03 +0000 (10:11 -0300)]
toolchain: add 4.1.x choice for headers
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sun, 21 Jun 2015 11:25:03 +0000 (08:25 -0300)]
openvmtools: fix legal info
In
ab71dff0 it was moved to SUBDIR, but this was never reflected for the
legal-info files, update this to fix:
http://autobuild.buildroot.net/results/836/
8363943cc9c967713f585209408ea087a052a12d/
[Thomas: put OPENVMTOOLS_SUBDIR before OPENVMTOOLS_LICENSE_FILES, as
suggested by Yann.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Mon, 15 Jun 2015 18:31:57 +0000 (20:31 +0200)]
package/{mesa3d, mesa3d-headers}: bump version to 10.6.0
Mesa3d 10.6 adds optional support for SHA-1:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=
a24bdce46f95cbe9efd3b26f157d1eb36584861f
Adding "--without-sha1" will cause this failure during configure:
configure: error: Illegal value for --with-sha1: no
so I did not add the else-clause when no SHA-1 provider is enabled.
[Thomas: simplify else ifeq.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Petr Vorel [Tue, 16 Jun 2015 13:23:54 +0000 (15:23 +0200)]
package/feh: bump to version 2.13.1, add hash file
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Doug Kehn [Mon, 15 Jun 2015 21:55:19 +0000 (16:55 -0500)]
package/gdb: gdb+expat build fix
Commit
23413b51b2308225584b65c2fcd800ca8f7c56af added --with-expat
configure option and expat dependency when BR2_PACKAGE_EXPAT is
configured. When cross-compiling, gdb configure fails because the host
system libexpat is referenced.
Configuring gdb with
--with-libexpat-prefix=$(STAGING_DIR)/usr
fixes the reference and allows gdb to build successfully.
Tested with arm-buildroot-linux-gnueabihf toolchain.
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Petr Vorel [Mon, 15 Jun 2015 22:57:22 +0000 (00:57 +0200)]
package/gpm: change archive to lzma
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Petr Vorel [Mon, 15 Jun 2015 22:57:21 +0000 (00:57 +0200)]
pkg-generic: support for lzma archives
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cédric Marie [Mon, 15 Jun 2015 20:02:45 +0000 (22:02 +0200)]
directfb: add an option for debugging support
DirectFB provides two options for debug:
* --enable-debug-support (default is yes)
* --enable-debug (default is no)
The first one provides the functions to print debug information. These
functions can be called inside DirectFB, or by an external DirectFB
driver in another package.
The second one enables verbose mode in DirectFB, using these functions.
Buildroot currently provides an option for the second one only. The
first one - which is necessary for the second one - is always enabled,
because this is the default value.
The new option (BR2_PACKAGE_DIRECTFB_DEBUG_SUPPORT) makes it possible
to disable debugging support (--disable-debug-support) in order to
build the library with no debug feature at all.
When debugging support is disabled, the target installation path of
drivers (/usr/lib/directfb-<version>) is suffixed with -pure. The
public library (/usr/lib/libdirectfb.so) remains unchanged.
Some external DirectFB drivers will install into
/usr/lib/directfb-<version>-pure in release mode. For that reason, it
is important that DirectFB can be configured to use this directory.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Matthew Starr [Tue, 16 Jun 2015 20:42:28 +0000 (15:42 -0500)]
system: make /bin/sh symlink use relative path
The symlink created by buildroot for /bin/sh is the full path to
a shell. This does not match what busybox and other Linux
distributions do with using relative path symlinks. When handling
files on the host system this will point to the host system's shell
if present and not the target shell.
This is fixed by changing the /bin/sh symlink to use a relative path.
Fixes #8161.
[Thomas: minor fixups to the commit log suggested by Yann E. Morin.]
Signed-off-by: Matthew Starr <mstarr@hedonline.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Tue, 16 Jun 2015 19:20:48 +0000 (21:20 +0200)]
python-lxml: bump to 3.4.4
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Tue, 16 Jun 2015 19:18:23 +0000 (21:18 +0200)]
package/x11r7/xdriver_xf86-video-vesa: bump to version 2.3.4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Tue, 16 Jun 2015 19:18:22 +0000 (21:18 +0200)]
package/x11r7/xserver_xorg-server: bump to version 1.17.2
Removed patches committed upstream:
http://cgit.freedesktop.org/xorg/xserver/commit/os/backtrace.c?h=server-1.17-branch&id=
8b7e1f362bf6940eb863fd02395bf8155d10604b
http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/sdksyms.sh?h=server-1.17-branch&id=
7a45d1684f626f3045305328c3aab85eed0673ea
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Wed, 17 Jun 2015 12:00:30 +0000 (14:00 +0200)]
agentpp: bump to 4.0.4
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luca Ceresoli [Wed, 17 Jun 2015 12:00:29 +0000 (14:00 +0200)]
snmppp: bump to 3.3.5
Also add a hash file.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 19 Jun 2015 19:13:22 +0000 (21:13 +0200)]
a10disp: bump to version v0.6.1
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Fri, 19 Jun 2015 19:13:21 +0000 (21:13 +0200)]
sunxi-boards: bump to version
a6a4e94066f4ec6b26fc7060dc453a6bcf26a504
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:46:09 +0000 (18:46 +0200)]
weston: bump to version 1.8.0
- Bump to version 1.8.0
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:46:08 +0000 (18:46 +0200)]
wayland: bump to version 1.8.1
- Bump to version 1.8.1
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:46:07 +0000 (18:46 +0200)]
tor: bump to version 0.2.6.9
- Bump to version 0.2.6.9
- Update hash file
- Adapt patch to new version
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:46:06 +0000 (18:46 +0200)]
postgresql: bump to version 9.4.4
- Bump to version 9.4.4
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:44:28 +0000 (18:44 +0200)]
pinentry: bump to version 0.9.4
- Bump to version 0.9.4
- Update hash file
- Remove upstreamed patches
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
James Knight [Fri, 19 Jun 2015 17:17:45 +0000 (13:17 -0400)]
fluxbox: explicitly configure optional dependencies
The following commit explicitly configures optional dependencies based
off the respective package selections for a given configuration.
In addition, this commit also cleans up some obsolete/incorrect
arguments. With the introduction of (at least) Fluxbox 1.3.7, the
'--with-imlib2-prefix' argument no longer exists. The argument
'--with-xpm-prefix' has never existed; it was accidentally committed
mimicking the configuration used to provide imlib2.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gwenhael Goavec-Merou [Fri, 10 Apr 2015 10:01:54 +0000 (12:01 +0200)]
gnuradio: add processing blocks
GNURadio provides a set of processing blocks like analog or digital
communication, filters, ...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[build-tested only]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bernd Kuhls [Sat, 20 Jun 2015 11:32:52 +0000 (13:32 +0200)]
package/tvheadend: bump version
host-gettext is needed since
https://github.com/tvheadend/tvheadend/commit/
bad281a9f5bbb8e7f968d400f8096908dfd798b9#diff-
e2d5a00791bce9a01f99bc6fd613a39d
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 20 Jun 2015 12:56:16 +0000 (09:56 -0300)]
dnsmasq: bump to version 2.73
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 20 Jun 2015 12:55:20 +0000 (09:55 -0300)]
mpfr: bump to version 3.1.3
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Sat, 20 Jun 2015 12:29:12 +0000 (09:29 -0300)]
linux-headers: bump 3.4.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:44:27 +0000 (18:44 +0200)]
lvm2: bump to version 2.02.121
- Bump to version 2.02.121
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:44:25 +0000 (18:44 +0200)]
lftp: bump to version 4.6.3a
- Bump to version 4.6.3a
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:44:24 +0000 (18:44 +0200)]
git: bump to version 2.4.4
- Bump to version 2.4.4
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jerzy Grzegorek [Thu, 18 Jun 2015 06:10:21 +0000 (08:10 +0200)]
package: indentation cleanup
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 17 Jun 2015 19:28:23 +0000 (21:28 +0200)]
python-pyinotify: bump to 0.9.6
Remove hash file as the project doesn't provide manual tarballs
on GitHub.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Francois Perrad [Wed, 17 Jun 2015 18:41:25 +0000 (20:41 +0200)]
lua: bump to version 5.3.1
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Wed, 17 Jun 2015 19:28:22 +0000 (21:28 +0200)]
python-tornado: bump to 4.2
Add md5 from pypi.python.org.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Wed, 17 Jun 2015 19:28:21 +0000 (21:28 +0200)]
tmux: bump to 2.0
Add new location as tmux moved to GitHub.
Remove the patch as it was already merged upstream.
Remove related AUTORECONF as well.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Jan Viktorin [Thu, 18 Jun 2015 16:27:57 +0000 (18:27 +0200)]
zedboard: Upgrade to Linux xilinx-v2015.1 (3.18)
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:46:10 +0000 (18:46 +0200)]
wireshark: bump to version 1.12.6
- Bump to version 1.12.6
- Update hash file
The following vulnerabilities have been fixed in 1.12.6:
- wnpa-sec-2015-19
WCCP dissector crash. (Bug 11153)
- wnpa-sec-2015-20
GSM DTAP dissector crash. (Bug 11201)
[Thomas: indicate that this is a security related updated in the
commit log, as suggested by Gustavo.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vicente Olivert Riera [Thu, 18 Jun 2015 16:44:26 +0000 (18:44 +0200)]
libcurl: bump to version 7.43.0
- Bump to version 7.43.0
- Update hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
James Knight [Thu, 18 Jun 2015 17:42:56 +0000 (13:42 -0400)]
fluxbox: fix build against xlib_libXpm
Explicitly configure XPM support based on the library selection provided
(BR2_PACKAGE_XLIB_LIBXPM). It has been observed on different hosts that
XPM support may or may not be included based off the state of the host's
system. One can validate XPM support is included in Fluxbox by using the
command `fluxbox -info`.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 18 Jun 2015 16:50:53 +0000 (18:50 +0200)]
python-netifaces: add hash file
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Yegor Yefremov [Thu, 18 Jun 2015 16:50:12 +0000 (18:50 +0200)]
hdparm: bump to 9.48
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gustavo Zacarias [Thu, 18 Jun 2015 18:33:47 +0000 (15:33 -0300)]
linux-headers: bump 3.{12,18}.x series
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
projects / buildroot.git / log