i386.c (function_arg): Return constm1_rtx for last argument.

* i386.c (function_arg): Return constm1_rtx for last argument.
(ix86_expand_prologue): Update gen_call calls.
* i386.h (FUNCTION_BLOCK_PROFILER_EXIT): Likewise.
* i386.md (call_pop): Likewise.
(call): Second operand is VOIDmode.
(call_0): Likewise; Support 64bits.
(call_exp): New expander.
(call_1): Get to the sync.
(call_1_exp): New pattern.
(call_value): Support 64bit.
(call_value_exp): New pattern.
(untyped_call): Update gen_call call.
(call_value_pop): Disable for 64bit.
(call_value_0_rex64): New pattern.
(call_value_1_rex64): Likewise.

From-SVN: r41120

Update.

From-SVN: r41119

i386.md: Don't allow "builtin_setjmp_receiver" for TARGET_64BIT.

2001-04-05  Bo Thorsen  <bo@suse.de>

* i386.md: Don't allow "builtin_setjmp_receiver" for TARGET_64BIT.

From-SVN: r41118

search.c (get_dynamic_cast_base_type): When building a new constant, set its type to ssizetype.

* search.c (get_dynamic_cast_base_type): When building a new
constant, set its type to ssizetype.

From-SVN: r41117

* libtool-version: Updated current.

From-SVN: r41116

i386.md (*andsi_1+3): If used after reload, make sure the operand satisfies ANY_QI_REG_P.

        * i386.md (*andsi_1+3): If used after reload, make sure the operand
satisfies ANY_QI_REG_P.

From-SVN: r41114

PARALLELs can contain ASM_OPERANDS.

From-SVN: r41112

Revert more of previous change

From-SVN: r41111

Daily bump.

From-SVN: r41108

config.gcc: Remove default for xm_file.

* config.gcc: Remove default for xm_file.  Clean up local
machine type handling.  Remove settings of xm_file to
something that doesn't exist.  In the big switch, set xm_file,
don't append to it (the value before the big switch is always
null).  Don't force build_xm_file or host_xm_file to have a value.
* configure.in: Remove default for xm_file.  Do not special
case $cpu/xm-$cpu.h not existing.
* configure: Regenerate.

From-SVN: r41106

simplify-rtx.c (simplify_binary_operation): Check for overflow when folding integer division and modulo operations.

2001-04-04  Diego Novillo  <dnovillo@redhat.com>

* simplify-rtx.c (simplify_binary_operation): Check for overflow
when folding integer division and modulo operations.

2001-04-04  Diego Novillo  <dnovillo@redhat.com>

* gcc.c-torture/compile/20010404-1.c: New test.

From-SVN: r41105

dwarf2out.c (output_cfi): Add 'for_eh' parameter, use PTR_SIZE instead of DWARF2_ADDR_SIZE for EH addresses.

2001-04-04  Andrew MacLeod  <amacleod@redhat.com>

* dwarf2out.c (output_cfi): Add 'for_eh' parameter, use PTR_SIZE
instead of DWARF2_ADDR_SIZE for EH addresses.
(output_call_frame_info): Use PTR_SIZE instead of DWARF2_ADDR_SIZE for
EH addresses.

From-SVN: r41104

finalize.c: - Accomodate finalization requests for static objects.

2001-04-04  Hans Boehm  <hans_boehm@hp.com>

* finalize.c:
- Accomodate finalization requests for static objects.
  (Will be required by hash synchronization.  May be needed
  in some configurations now.)

* gc_priv.h:
- Define MIN_WORDS.  All allocation requests are rounded
  up to at least this size.  Removes a subtle assumption that
  Java objects have a 2 word header.

* gcconfig.h:
- Adjust Linux/IA64 configuration for non-ancient kernels.
  (Necessary fix for IA64.)

* linux_threads.c:
- Fix syntax error in currently unused code.  Will be needed
  for Linux/PA-RISC.

* malloc.c:
- Handle MIN_WORDS.

* misc.c:
- Handle MIN_WORDS.
- Change stack cleaning code to typically clear about one tenth
  the memory it used to in the threads configuration.  Occasionally
  still clear more.  (This is really a fix for a long-standing
  and fairly significant performance bug with threads.)

* os_dep.c:
- Fix the code for finding the beginning of the data segment under
  Linux.  I believe this is necessary for some IA64 Linux
  distributions.  It will also helo other platforms, though those
  may additionally require a gcconfig.h adjustment.  (This basically
  works around the absence of a data_start or __data_start
  definition in glibc.)

* test.c:
- Handle rounding due to MIN_WORDS.

From-SVN: r41102

Makefile.am (AUTOMAKE_OPTIONS): Remove no-installinfo.

2001-04-04  Andreas Jaeger  <aj@suse.de>

* gcj/Makefile.am (AUTOMAKE_OPTIONS): Remove no-installinfo.
* gcj/Makefile.in: Rebuilt.
* Makefile.am (AUTOMAKE_OPTIONS): Remove no-installinfo.
* Makefile.in: Rebuilt.
* testsuite/Makefile.am (AUTOMAKE_OPTIONS): Remove no-installinfo.
* testsuite/Makefile.in: Rebuild.
* include/Makefile.am (AUTOMAKE_OPTIONS): Remove no-installinfo.
* include/Makefile.in: Rebuild.

From-SVN: r41100

user.cfg.in: Extract all non-private members; reduce confusing documentation output.

2001-04-04  Phil Edwards  <pme@sources.redhat.com>

* docs/doxygen/user.cfg.in:  Extract all non-private members;
  reduce confusing documentation output.

From-SVN: r41097

ia64.h (IA64_UNWIND_INFO): Disable.

        * config/ia64/ia64.h (IA64_UNWIND_INFO): Disable.
        * config/ia64/t-glibc (LIB2ADDEH): Disable.
        * config/ia64/t-ia64 (LIB2ADDEH): Disable.

From-SVN: r41096

configure.in (gcc_cv_as_leb128): Escape ".".

        * configure.in (gcc_cv_as_leb128): Escape ".".
        * configure: Rebuilt.

From-SVN: r41095

java-tree.h (CONSTANT_VALUE_P): New macro.

* java-tree.h (CONSTANT_VALUE_P):  New macro.
* jcf-write.c (generate_classfile):  Use CONSTANT_VALUE_P.
* parse.y (maybe_build_class_init_for_field):  New static function.
(resolve_expression_name, resolve_field_access):  Use
maybe_build_class_init_for_field instead of build_class_init
This does not do the init if the field is compile-time-constant.
(resolve_field_access):  Simplify.

* parse.y (fold_constant_for_init):  Merge test into switch.

From-SVN: r41094

gcse.c (delete_null_pointer_checks_1): Add delete_list argument, push insns to delete to it instead of deleting them.

* gcse.c (delete_null_pointer_checks_1): Add delete_list argument,
push insns to delete to it instead of deleting them.
(delete_null_pointer_checks): Delete insns from delete_list after
all delete_null_pointer_checks_1 passes are done.

From-SVN: r41092

* include/backward/fstream.h: Add missing semicolons.

From-SVN: r41090

re PR java/1074 (jv-scan fails on ArrayClass.java)

2001-03-30  Alexandre Petit-Bianco  <apbianco@redhat.com>

* parse-scan.y (array_type:): Rewritten.
(type_declaration:): `empty_statement' replaces `SC_TK.'
(class_member_declaration:): `empty statement' added.
(method_body:): Simplified.
(static_initializer:): Likewise.
(primary_no_new_array:): Use `type_literals.'
(type_literals:): New rule.
(dims:): Set and update `bracket_count.'
Fixes PR java/1074. Fixes PR java/2412.

(http://gcc.gnu.org/ml/gcc-bugs/2001-03/msg00835.html,
 http://gcc.gnu.org/ml/gcc-bugs/2000-12/msg00384.html,
 http://gcc.gnu.org/ml/gcc-patches/2001-04/msg00258.html)

From-SVN: r41089

configure.in (gcc_cv_as_leb128): Tweek minor number extraction.

        * configure.in (gcc_cv_as_leb128): Tweek minor number extraction.
        * configure: Rebuilt.

From-SVN: r41087

expr.h: Remove #ifdef FUNCTION_CONVERSION_BUG logic.

* expr.h: Remove #ifdef FUNCTION_CONVERSION_BUG logic.
* config/romp/xm-romp.h: Delete.
* po/POTFILES.in: Remove config/romp/xm-romp.h.

From-SVN: r41086

Partially revert previous change

From-SVN: r41085

When splitting insns, properly update label usage counts

From-SVN: r41084

recog.c (validate_replace_rtx_1): Instead of aborting just make sure the change won't be validated.

* recog.c (validate_replace_rtx_1): Instead of aborting just make
sure the change won't be validated.

* gcc.c-torture/compile/20010326-1.c: New test.

From-SVN: r41083

optimize.c (expand_call_inline): Only add newly inlined statements into inlined_stmts.

* optimize.c (expand_call_inline): Only add newly inlined statements
into inlined_stmts.

From-SVN: r41081

Daily bump.

From-SVN: r41079

rtl.h (set_noop_p): Declare.

* rtl.h (set_noop_p): Declare.
* flow.c (set_noop_p): Move from here ...
* rtlanal.c (set_noop_p): ... to here and enhance.
* cse.c (delete_trivially_dead_insns): Use it.
* gcse.c (hash_scan_set): Likewise.
* jump.c (delete_noop_moves): Likewise.
* recog.c (split_all_insns): Likewise.

From-SVN: r41077

cp-tree.h (OPERATOR_ASSIGN_FORMAT): Remove.

* cp-tree.h (OPERATOR_ASSIGN_FORMAT): Remove.
(OPERATOR_FORMAT): Likewise.
(OPERATOR_TYPENAME_FORMAT): Likewise.
* operators.def: Remove old name-mangling information.
* decl.c (grok_op_properties): Adjust accordingly.
* lex.c (init_operators): Likewise.
* rtti.c (get_tinfo_decl): Issue error messages about types that
have variable size.

From-SVN: r41076

DWARF2 frame notes for hppa.

* dwarf2out.c (dwarf2out_frame_debug_expr): Support adjusting
stack pointer via a LO_SUM.  Ditto for setting a temp register
used to save to the stack.  Set cfa_temp when setting fp, and
allow matches to cfa_temp in addition to cfa_store when saving
regs.  Handle POST_INC and LO_SUM register stores.  Document the
changes and errors in rule 12 doco.

* pa.c (set_reg_plus_d, store_reg, load_reg): Return last insn.
(actual_fsize, local_fsize, save_fregs): Move for store_reg to see.
(load_reg): Move closer to epilogue code.
(DO_FRAME_NOTES): Define to control the following..
(FRP): Define to set RTX_FRAME_RELATED_P on insns.
(hppa_expand_prologue): Use FRP and REG_FRAME_RELATED_EXPR
notes as necessary.
(hppa_expand_epilogue): Likewise.

From-SVN: r41074

configure.in (gcc_cv_as_leb128): Reject gas before 2.11.

        * configure.in (gcc_cv_as_leb128): Reject gas before 2.11.
        * configure: Rebuild.

From-SVN: r41073

fstream.tcc: Add bool parameter to filebuf ctor.

2001-04-03  Benjamin Kosnik  <bkoz@redhat.com>

* include/bits/fstream.tcc: Add bool parameter to filebuf ctor.
* include/bits/ios_base.h(ios_base::Init): Remove _M_cout, _M_cin,
_M_cerr, _M_wcout, _M_wcin, _M_wcerr.
(ios_base::Init::_S_ios_create): New.
(ios_base::Init::_S_ios_destroy): New.
* include/bits/std_fstream.h: Change ctor args.
* src/ios.cc (ios_base::Init::Init): Use _S_ios_create.
(ios_base::Init::~Init): Use _S_ios_destroy.
(ios_base::sync_with_stdio): Use new members.
* testsuite/27_io/filebuf_members.cc: Fix calling conventions for
filebuf ctor.

From-SVN: r41072

POTFILES.in: Remove all the files deleted by the xm-host.h purge...

* POTFILES.in: Remove all the files deleted by the xm-host.h
purge, also frame.c, frame-dwarf2.c, and gansidecl.h.

From-SVN: r41071

rtl.h (LCT_THROW): New.

        * rtl.h (LCT_THROW): New.
        * calls.c (emit_library_call_value_1): Handle it.
        * except.c (connect_post_landing_pads): Use it.

From-SVN: r41070

ansidecl.h: All logic from gcc/gansidecl.h moved here.

include:
* ansidecl.h: All logic from gcc/gansidecl.h moved here.
gcc:
* gansidecl.h: Delete file.
* configure.in: Change all refs to gansidecl.h to use
ansidecl.h.  Adjust *_file_list so they know where ansidecl.h
lives.
* configure: Regenerate.

* Makefile.in (intl.o): Don't depend on gansidecl.h.
* defaults.h: s/gansidecl.h/ansidecl.h/ in comment.
* ggc.h, config/fr30/fr30.h, config/mcore/mcore.c:
Don't include gansidecl.h.
* intl.c, main.c, version.c, fixinc/fixlib.h,
fixinc/procopen.c, fixinc/server.c: Include ansidecl.h not
gansidecl.h.
gcc/java:
* Make-lang.in (buffer.o, check-init.o, class.o): Don't depend
on gansidecl.h.
* buffer.c, jvgenmain.c: Don't include gansidecl.h.
libiberty:
* make-temp-file.c (try): Inline.

From-SVN: r41069

decl2.c (import_export_decl): Don't call import_export_class when processing an inline member function.

* decl2.c (import_export_decl): Don't call import_export_class
when processing an inline member function.
* semantics.c (expand_body): Call import_export_decl before
emitting inline functions.

From-SVN: r41066

fstream.h: Expose streampos to global namespace.

2001-04-03  Peter Schmid  <schmid@snake.iap.physik.tu-darmstadt.de>

        * include/backward/fstream.h:  Expose streampos to global
          namespace.

From-SVN: r41064

stl_iterator_base_types.h: Fix typo

2001-04-03  Peter Schmid  <schmid@snake.iap.physik.tu-darmstadt.de>

* include/bits/stl_iterator_base_types.h: Fix typo

From-SVN: r41063

i386.c (ix86_force_to_memory, [...]): Update for 64bit.

* i386.c (ix86_force_to_memory, ix86_free_from_memory):
Update for 64bit.

From-SVN: r41062

xm-beos.h, [...]: Delete.

* config/i386/xm-beos.h, config/i386/xm-isc.h,
config/i386/xm-next.h, config/i386/xm-sco.h,
config/i386/xm-sco5.h, config/m68k/xm-plexus.h,
config/m88k/xm-m88k.h: Delete.

* config/i386/xm-djgpp.h: Don't define __MSDOS__.
* config/romp/xm-romp.h: Don't define bcopy.
* config/rs6000/xm-beos.h: Don't define bcopy, HAVE_VPRINTF,
HAVE_PUTENV, HAVE_RENAME, or USE_C_ALLOCA.

* config.gcc: Remove references to deleted files.

From-SVN: r41061

boehm.c (PROCEDURE_OBJECT_DESCRIPTOR): Set to use `build_int_2.'

2001-03-28  Hans Boehm  <boehm@acm.org>

        * boehm.c (PROCEDURE_OBJECT_DESCRIPTOR): Set to use `build_int_2.'
        (get_boehm_type_descriptor): Set type on returned value to be a
        pointer length integer.

(http://gcc.gnu.org/ml/java/2001-03/msg00444.html)

From-SVN: r41059

Use byte offsets in SUBREGs instead of words.

2001-04-03  Jakub Jelinek  <jakub@redhat.com>
    David S. Miller  <davem@pierdol.cobaltmicro.com>
            Andrew MacLeod  <amacleod@redhat.com>

Use byte offsets in SUBREGs instead of words.

* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work.  Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code.  Don't combine subregs unless resulting
offset aligns with type.  Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset.  Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE.  Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE.  Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.

Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058

configure.in (target_subdir): Use target_alias, not target.

* configure.in (target_subdir): Use target_alias, not target.
* configure: Rebuilt.

From-SVN: r41051

* include/backward/fstream.h: Define filebuf and wfilebuf.

From-SVN: r41048

crtn.asm (init, fini): Restore r15 from r14, not the other way round.

* config/sh/crtn.asm (init, fini): Restore r15 from r14, not the
other way round.
* config/sh/crti.asm: Fix typos in comments.

From-SVN: r41047

instantiate1.C: Adjust to accommodate peculiarities of the SH.

* g++.old-deja/g++.ext/instantiate1.C: Adjust to accommodate
peculiarities of the SH.
* g++.old-deja/g++.ext/instantiate2.C: Likewise.

From-SVN: r41045

Move ChangeLog entry where it belongs.

From-SVN: r41043

TARGET_NO_SPACE_REGS no longer affects call sequences.

* pa.h: Revise comments for TARGET_NO_SPACE_REGS and
TARGET_FAST_INDIRECT_CALLS.
* pa.c (override_options): TARGET_NO_SPACE_REGS is now OK with
-fPIC.  Don't warn.
(return_addr_rtx): Short circuit export stub matching when
TARGET_NO_SPACE_REGS.
(output_millicode_call): For out of range calls, make -fPIC
take precedence, then TARGET_PORTABLE_RUNTIME, then ble.  Don't
return before delay slot checks when TARGET_PORTABLE_RUNTIME.
* pa.md: Modify length attr calculation of all millicode insns to
match above.

From-SVN: r41042

Daily bump.

From-SVN: r41041

configure.in (gcc_cv_as_leb128): Correct name of cache variable.

* configure.in (gcc_cv_as_leb128): Correct name of cache variable.
Require at least 2.11 in the version test.  Specifically check
for and reject GAS version 2.10.90.
* configure: regenerate.

From-SVN: r41039

Rewrite hppa profiling support.

* config/pa/pa.c (override_options): Remove PIC profiling warning.
(hp_profile_labelno): Delete.
(hp_profile_label_rtx): Delete.
(hp_profile_label_name): Delete.
(pa_add_gc_roots): Remove reference to hp_profile_label_rtx.
(output_function_prologue): Remove profiling code and all tests on
profile_flag.  Move store of PIC_OFFSET_TABLE_REGNUM now that
merge_sp_adjust_with_store can work for PIC and profiling.
(hppa_expand_epilogue): Remove profile_flag test.
(hppa_can_use_return_insn_p): Likewise.
(hppa_init_pic_save): Emit before tail_recursion_reentry, and
cater for PROFILE_HOOK.
(hppa_profile_hook): New function.
* config/pa/pa.h (FUNCTION_PROFILER): Now does nothing.
(PROFILE_HOOK): Define.
(hppa_profile_hook): Declare.
(PROFILE_BEFORE_PROLOGUE): Delete.
(ASM_OUTPUT_REG_PUSH): Delete.
(ASM_OUTPUT_REG_POP): Delete.
* config/pa/pa.md (call_profiler): Turn it into a call insn, and
don't `use' r24.  Accept function name operand, and use this and a
locally generated label to calculate pc-rel offset to func start.

From-SVN: r41038

com.c (duplicate_decls): Fix thinko in lazy DECL_RTL patch of 2001-03-04.

* com.c (duplicate_decls): Fix thinko in lazy DECL_RTL patch
of 2001-03-04.

From-SVN: r41037

Makefile.in ($(HOST_PREFIX_1)errors.o, [...]): Depend on $(SYSTEM_H).

* $(HOST_PREFIX_1)errors.o, $(HOST_PREFIX_1)ggc-none.o,
ggc-common.o, ggc-simple.o, ggc-page.o, ggc-none.o: Depend on
$(SYSTEM_H).

From-SVN: r41035

dwarf2out.c (dwarf2out_frame_debug_expr): Move errant HIGH and LO_SUM cases to where they belong.

* dwarf2out.c (dwarf2out_frame_debug_expr): Move errant HIGH and
LO_SUM cases to where they belong.

From-SVN: r41033

expr.c (pop_type_0): Save the result of the first lang_printable_name call in a scratch buffer...

* expr.c (pop_type_0): Save the result of the first
lang_printable_name call in a scratch buffer, so it
won't be clobbered by the second call.

From-SVN: r41032

New concept checking implementation.

2001-04-02  Phil Edwards  <pme@sources.redhat.com>

New concept checking implementation.
* docs/html/19_diagnostics/howto.html:  Document.
* docs/html/17_intro/concept_check.diff:  New file, for reference.
* include/bits/boost_concept_check.h:  New file from Boost.
* include/bits/c++config:  Update comments.

* include/bits/concept_check.h:  New file.
* include/bits/concept_checks.h:  Removed.
* include/bits/container_concepts.h:  Removed.
* include/bits/sequence_concepts.h:  Removed.
* include/bits/stl_iterator_base.h:  Removed; split into...
* include/bits/stl_iterator_base_funcs.h:  ...this new file...
* include/bits/stl_iterator_base_types.h:  ...and this new file.

* include/bits/sbuf_iter.h:  Update to use new implementation.
* include/bits/std_iterator.h:  Likewise.
* include/bits/std_memory.h:  Likewise.
* include/bits/stl_algo.h:  Likewise.
* include/bits/stl_algobase.h:  Likewise.
* include/bits/stl_construct.h:  Likewise.
* include/bits/stl_deque.h:  Likewise.
* include/bits/stl_heap.h:  Likewise.
* include/bits/stl_list.h:  Likewise.
* include/bits/stl_map.h:  Likewise.
* include/bits/stl_multimap.h:  Likewise.
* include/bits/stl_multiset.h:  Likewise.
* include/bits/stl_numeric.h:  Likewise.
* include/bits/stl_queue.h:  Likewise.
* include/bits/stl_set.h:  Likewise.
* include/bits/stl_stack.h:  Likewise.
* include/bits/stl_uninitialized.h:  Likewise.
* include/bits/stl_vector.h:  Likewise.
* include/ext/hash_map:  Likewise.
* include/ext/hash_set:  Likewise.
* include/ext/slist:  Likewise.
* include/ext/stl_hashtable.h:  Likewise.

* src/Makefile.am (base_headers):  Update list of headers.
* Makefile.in:  Regenerated.
* src/Makefile.in:  Regenerated.
* libio/Makefile.in:  Regenerated.
* libmath/Makefile.in:  Regenerated.
* libsupc++/Makefile.in:  Regenerated.
* testsuite/Makefile.in:  Regenerated.

* docs/html/install.html:  Update contact information.
* docs/html/17_intro/howto.html:  Ditto.
* docs/html/18_support/howto.html:  Ditto.
* docs/html/20_util/howto.html:  Ditto.
* docs/html/21_strings/howto.html:  Ditto.
* docs/html/22_locale/howto.html:  Ditto.
* docs/html/23_containers/howto.html:  Ditto.
* docs/html/24_iterators/howto.html:  Ditto.
* docs/html/25_algorithms/howto.html:  Ditto.
* docs/html/26_numerics/howto.html:  Ditto.
* docs/html/27_io/howto.html:  Ditto.
* docs/html/faq/index.html:  Ditto, plus info on new checking code.
* docs/html/ext/howto.html:  Ditto, plus info on new checking code.
* docs/html/faq/index.txt:  Regenerated.

From-SVN: r41031

libstdc++.exp (dg-test): Annotate result messages with $which_library as well as $tool_flags and...

* testsuite/lib/libstdc++.exp (dg-test): Annotate result
messages with $which_library as well as $tool_flags and
${dg-extra-tool-flags}.  Factor out annotation text into
a single variable.

From-SVN: r41029

libjava.exp: Correct typo...

* testsuite/lib/libjava.exp: Correct typo: 'output from source
compiled test', not 'execution from source compiled test'.
Use UNTESTED, not XFAIL, for tests which are not run because
they depend on a previous test which failed.

From-SVN: r41026

configure.in (GCC_UNWIND_INCLUDE): Assume we're built within the same tree as gcc.

        * configure.in (GCC_UNWIND_INCLUDE): Assume we're built within
        the same tree as gcc.
        * configure: Rebuilt.

        * exception.cc (_Jv_Throw): Clarify commentary.

From-SVN: r41025

except.h (lang_eh_type_covers): Mark extern.

        * except.h (lang_eh_type_covers): Mark extern.
        (lang_eh_runtime_type): Likewise.

From-SVN: r41024

fp-cmp-1.c: Renamed nan to dnan.

2001-04-02  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>

        * gcc.c-torture/execute/ieee/fp-cmp-1.c: Renamed nan to dnan.
        * gcc.c-torture/execute/ieee/fp-cmp-3.c: Likewise.
        * gcc.c-torture/execute/ieee/fp-cmp-2.c: Renamed nan to fnan.

From-SVN: r41022

jni.cc (wrap_value<jclass>): New specialization.

2001-04-02  Marcus G. Daniels  <mgd@swarm.org>

* jni.cc (wrap_value<jclass>): New specialization.

From-SVN: r41021

std_cstring.h: Fix for const-correctness.

2001-04-02  Stephen M. Webb  <stephen@bregmasoft.com>

* include/c_std/bits/std_cstring.h: Fix for const-correctness.
* include/c_std/bits/std_cwchar.h: Same.
* testsuite/21_strings/c_strings.cc: Add.

From-SVN: r41019

std_cstring.h: Fix for const-correctness.

2001-04-02  Stephen M. Webb  <stephen@bregmasoft.com>

* include/c_std/bits/std_cstring.h: Fix for const-correctness.
* include/c_std/bits/std_cwchar.h: Same.
* testsuite/21_strings/c_strings.cc: Add.

From-SVN: r41018

lex.c (ffelex_hash_): Avoid eating one whole line after #line.

* lex.c (ffelex_hash_): Avoid eating one whole line after
#line.

* g77.f-torture/compile/20010321-1.f: New test.

From-SVN: r41015

PrintStream.java (out): Removed field.

* java/io/PrintStream.java (out): Removed field.  Fixes PR
java/2449.
(write): Call flush, not out.flush, per spec.
(close): Flush output stream, per spec.  Handle
InterruptedIOException.
(checkError): Likewise.
(flush, print, write): Handle InterruptedIOException per spec.
(PrintStream): Don't create BufferedOutputStream.
(work_bytes): New field.
(writeChars): Use work_bytes.  Don't assume `out' is a
BufferedOutputStream.

From-SVN: r41014

re PR libgcj/2429 (java.text.MessageFormat should usefully set text on exceptions)

2001-04-02  Torsten Rueger  <torsten.rueger@firsthop.com>

* java/text/MessageFormat.java (setLocale): Added missing `else'.
For PR libgcj/2429.

From-SVN: r41012

jni.cc (add_char): Correctly encode non-ascii characters.

* jni.cc (add_char): Correctly encode non-ascii characters.
(add_char): Define even when INTERPRETER not defined.
(mangled_name): Likewise.
(_Jv_GetJNIEnvNewFrame): Likewise.
(_Jv_LookupJNIMethod): Likewise.

From-SVN: r41010

* configure.host: Enable interpreter for PPC.

From-SVN: r41009

configopts.html: Add --enable-sjlj-exceptions docs.

2001-04-01  Benjamin Kosnik  <bkoz@codesourcery.com>

* docs/html/configopts.html: Add --enable-sjlj-exceptions docs.

From-SVN: r41007

genattr.c, [...]: Wrap generated header in multiple-include guard.

* genattr.c, gencheck.c, gencodes.c, genconfig.c, genflags.c,
gengenrtl.c:  Wrap generated header in multiple-include guard.
Improve error checking.

From-SVN: r41006

configure.in: Don't check for putenv.

* configure.in: Don't check for putenv.
* configure: Regenerate.
* gcc.c (putenv): Don't define.
* vax/xm-vms.h: Handle putenv.

From-SVN: r41005

ifcvt.c (noce_emit_move_insn): New.

* ifcvt.c (noce_emit_move_insn): New.
(noce_try_store_flag, noce_try_store_flag_constants,
noce_try_store_flag_inc, noce_try_store_flag_mask,
noce_try_cmove, noce_try_cmove_arith, noce_try_minmax,
noce_try_abs): Use it.
(noce_process_if_block): Likewise.
For STRICT_LOW_PART, take mode from its SUBREG.

* gcc.c-torture/compile/20010329-1.c: New test.

From-SVN: r41001

fold-const.c (fold): Before optimizing unsigned comparison with 0x7fffffffU...

* fold-const.c (fold): Before optimizing unsigned comparison with
0x7fffffffU, make sure arg0 is integral type.

* gcc.c-torture/execute/20010329-1.c: New test.

From-SVN: r41000

* c-tree.texi: Document representation of wide strings.

From-SVN: r40998

Daily bump.

From-SVN: r40997

* except.h (expand_builtin_dwarf_fp_regnum): Declare.

From-SVN: r40995

natSystem.cc (init_properties): Revert yesterday's changes to "file.separator"...

* java/lang/natSystem.cc (init_properties): Revert yesterday's changes
to "file.separator", "path.separator", and "java.io.tmpdir" property
initialization.
* java/io/File.java: Likewise.
* java/io/natFile.cc (init_native): Likewise.
* java/io/natFileWin32.cc (init_native): Likewise.

From-SVN: r40994

Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, [...]): New macros.

* Makefile.in (CXX_FOR_TARGET_FOR_RECURSIVE_MAKE, RECURSE_FLAGS):
New macros.
(bootstrap, cross): Use RECURSE_FLAGS.
* configure.in: Subst CXX_FOR_TARGET_FOR_RECURSIVE_MAKE.

From-SVN: r40991

natString.cc (intern): If string's data does not point to this String, make a fresh String that does.

* java/lang/natString.cc (intern):  If string's data does not point to
this String, make a fresh String that does.

* java/lang/natString.cc (unintern):  Replace by static function.
* java/lang/String.java (unintern):  Remove method.

From-SVN: r40990

DeflaterOutputStream.java (deflate): Loop while def.needsInput.

* DeflaterOutputStream.java (deflate):  Loop while def.needsInput.
(finish):  def.deflate needs to be called in a loop.
(inbuf, inbufLength):  New private fields.
(write(int)): Use inbuf.
(write(byte[],int,int):  Check if pending output in inbuf.
* ZipOutputStream.java:  Don't use Deflater if stored.
Use a Checksum object directly, not via a CheckedOutputStream.
(uncompressed_size):  New field,
(closeEntry):  Only write data_directory if needed.
(write):  If STORED, write directly.
Always update crc, and uncompressed_size.
(write_entry):  Fix lots of protocol erors.

From-SVN: r40988

tests_flags.in: Use test a = b, not test a == b which is not portable.

* tests_flags.in: Use test a = b, not test a == b which is not
portable.

From-SVN: r40986

1.3-Compliant Implementation of java.io.File.

* java/lang/natSystem.cc (init_properties): Get "file.separator",
"path.separator", and "java.io.tmpdir" from the File class, instead
of setting them explicitly.
* java/io/File.java: Do not canonicalize paths for security manager
checks. Call init_native() from static initializer. Do not pass path
argument to native methods. New native method declarations. Some
security manager checks moved to checkWrite().
(equals): Check file system case sensitivity and act appropriatly.
(hashCode): Likewise.
(isHidden): New method implemented.
(performList): Changed prototype. Now takes a class argument specifying
the class of the returned array: Strings or File objects. Also added
FileFilter argument.
(listFiles): New variants with "File" return type implemented.
(createTempFile): Use createNewFile(). Use maxPathLen.
(setReadOnly): New method implemented.
(listRoots): Likewise.
(compareTo): Likewise.
(setLastModified): Likewise.
(checkWrite): New method.
(setPath): Removed.
* java/io/natFile.cc: Various functions no longer take canonical path
argument.
(stat): Handle ISHIDDEN query.
(isAbsolute): Remove WIN32 cruft.
(performList): New arguments. Handle returning either File[] or
String[] arrays. Check with FileFilter or FilenameFilter arguments as
appropriate. Use an ArrayList, not a Vector, for the temporary list.
(performSetReadOnly): New method implemented.
(performListRoots): Likewise.
(performSetLastModified): Likewise.
(performCreate): Likewise.
(init_native): New initialization function.
* java/io/natFileWin32.cc: Various functions no longer take canonical
path argument.
(stat): Add FIXME about ISHIDDEN query.
(performList): New arguments. Handle returning either File[] or String[]
arrays. Check with FileFilter or FilenameFilter arguments as
appropriate. Use an ArrayList, not a Vector, for the temporary list.
(performSetReadOnly): New. Stubbed.
(performListRoots): Likewise.
(performSetLastModified): Likewise.
(performCreate): Likewise.
(init_native) New initialization function.
* configure.in: Check for utime() and chmod().
* configure: Rebuilt.
* include/config.h.in: Rebuilt.

Resolves PR libgcj/1759.

From-SVN: r40985

i386.md: remove obsoleted comments.

* i386.md: remove obsoleted comments.
(adddi_?): Rename to adddi_?_rex64; disable for 32bit.
(x86_movsicc_0_m1_rex64): Rename to x86_movdicc_0_m1_rex64;
fix output template.

From-SVN: r40982

Daily bump.

From-SVN: r40980

[multiple changes]

2001-03-31  Benjamin Kosnik  <bkoz@redhat.com>

* configure.target: Remove duplicate aix entry.

2001-03-30  Benjamin Kosnik  <bkoz@redhat.com>

* include/ext/stl_bvector.h: Move to...
* include/bits/stl_vector.h: ...here.
* include/ext/bvector: Move to...
* include/backward/bvector.h: ...here.
* include/bits/std_vector.h: Change stl_bvector include.
* include/bits/std_queue.h: Remove bvector include.
* include/ext/tree: Insert using rb_tree, move to...
* include/backward/tree.h: ...here.
* include/backward/hash_map.h: Include ext/hash_map.
* include/backward/hash_set.h: Include ext/hash_set.
* include/backward/queue.h: New file.
* include/backward/stack.h: Edit.
* include/backward/algo.h: Same.
* include/backward/algobase.h: Same.
* include/backward/alloc.h: Same.
* include/backward/function.h: Same.
* include/backward/iomanip.h: Same.
* include/backward/istream.h: Same.
* include/backward/iterator.h: Same.
* include/backward/list.h: Same.
* include/backward/map.h: Same.
* include/backward/multimap.h: Same.
* include/backward/multiset.h: Same.
* include/backward/ostream.h: Same.
* include/backward/pair.h: Same
* include/backward/rope.h: Same.
* include/backward/set.h: Same.
* include/backward/stream.h: Same.
* include/backward/strstream.h: Same.
* include/backward/tempbuf.h: Same.
* src/Makefile.am (ext_headers): Edit.
* src/Makefile.in: Regenerate.
* testsuite/ext/headers.cc (main): Fix.
* mkcheck.in: Fix.

From-SVN: r40979

* libiberty.h (alloca): Handle setting C_ALLOCA.

From-SVN: r40978

* config/avr/libgcc.S (__mulhi3): Optimize previous change.

From-SVN: r40976

Daily bump.

From-SVN: r40974

tests_flags.in (LIBS): Pass correct path for installed testing.

2001-03-30  Phil Edwards  <pme@sources.redhat.com>

* tests_flags.in (LIBS):  Pass correct path for installed testing.

From-SVN: r40973

mkcheck.in (LIBTOOL): Don't construct -B argument here...

 2001-03-28  Benjamin Kosnik  <bkoz@redhat.com>

* mkcheck.in (LIBTOOL): Don't construct -B argument here...
* tests_flags.in (CXX): Construct here.
(static_fail): Don't remove compile.out. Format with spaces.
(INCLUDES): Deal with xcompiling.
* configure.in (xcompiling): Substitute.
* testsuite/Makefile.am: Snake libjava configury.
* testsuite/Makefile.in: Regenerate.
* testsuite/23_containers/map_operators.cc: Tweaks.
* testsuite/23_containers/set_operators.cc: Tweaks.

From-SVN: r40972

Prevent hoisting code from generating uninitialized accesses.

From-SVN: r40971

i386.c (ix86_split_long_move): Use change address to compensate stack pointer change in push instruction.

* i386.c (ix86_split_long_move): Use change address to compensate
stack pointer change in push instruction.

From-SVN: r40968

Daily bump.

From-SVN: r40961

[multiple changes]

2001-03-28  Benjamin Kosnik  <bkoz@redhat.com>

* mkcheck.in (LIBTOOL): Don't construct -B argument here...
* tests_flags.in (CXX): Construct here.
(static_fail): Don't remove compile.out. Format with spaces.
(INCLUDES): Deal with xcompiling.
* configure.in (xcompiling): Substitute.
* testsuite/Makefile.am: Snake libjava configury.
* testsuite/Makefile.in: Regenerate.
* testsuite/23_containers/map_operators.cc: Tweaks.
* testsuite/23_containers/set_operators.cc: Tweaks.

2001-03-28  Gabriel Dos Reis  <gdr@merlin.codesourcery.com>

Enable dejagnu testing framework.
* configure.in: Generate testsuite/Makefile.
* configure: Regenerate.
* Makefile.am (check-install): Change rule from this...
(check-script-install): ...to this.
(check): Change rule from this...
(check-script):...to this.
* Makefile.in: Regenerate.

From-SVN: r40960

i386.md (sse_movdfcc_eq): Fix constraint (sse_mov?fcc splitter): Use operands_match_p instead of...

* i386.md (sse_movdfcc_eq): Fix constraint (sse_mov?fcc splitter): Use operands_match_p
instead of rtx_equal_p; fix the output template.

From-SVN: r40959

i386.c (ix86_expand_setcc): Support 64bit.

* i386.c (ix86_expand_setcc): Support 64bit.
(ix86_expand_int_movcc): Likewise.
* i386.md (movdicc_rex64, x86_movsicc_0_m1_rex64, movdicc_c_rex64):
New patterns.

* i386.md (allocate_stack_worker): Turn to expander.
(allocate_stack_worker_1, allocate_stack_worker_rex64): New insns.

* i386.c (print_reg): Do not print x86_64 style regs on IA-32

From-SVN: r40958

* libgcc2.c [L__main]: Include unwind-dw2-fde.h instead of frame.h.

From-SVN: r40957

mn10300.md (cmpsi): Fix first alternative's output template.

2001-03-28  Matthew Hiller  <hiller@redhat.com>

* config/mn10300/mn10300.md (cmpsi): Fix first alternative's
output template.

* MAINTAINERS: Added self.

From-SVN: r40956