package/libvorbis: fix CVE-2018-10392

mapping0_forward in mapping0.c in Xiph.Org libvorbis 1.3.6 does not
validate the number of channels, which allows remote attackers to cause
a denial of service (heap-based buffer overflow or over-read) or
possibly have unspecified other impact via a crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/blktrace: fix CVE-2018-10689

blktrace (aka Block IO Tracing) 1.2.0, as used with the Linux kernel and
Android, has a buffer overflow in the dev_map_read function in
btt/devmap.c because the device and devno arrays are too small, as
demonstrated by an invalid free when using the btt program with a
crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: test_systemd.py: add linux fragment to enable CONFIG_BINFMT_MISC

While investigating [1] one units failed due to missing kernel option
CONFIG_BINFMT_MISC needed by "proc-sys-fs-binfmt_misc.mount" service.

It's because the kernel support autofs4 but not MISC binaries.

Since the systemd test infra use the default defconfig (vexpress),
we need to provide a linux fragment to enable CONFIG_BINFMT_MISC.

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/454255917

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
  - move the kernel config with the others in conf/
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/systemd: random-seed: add missing header for GRND_NONBLOCK

GRND_NONBLOCK has been introduced with the 3.17 kernel version [1]
while adding getrandom(2) system call.

The header missing_random.h is needed for random-seed.c when building
with old toolchain, such Sourcery CodeBench ARM 2014.05 (kernel headers
3.13).

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255917

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=c6e9d6f38894798696f23c8084ca7edbf16ee895

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pure-ftpd: fix CVE-2020-9365

An issue was discovered in Pure-FTPd 1.0.49. An out-of-bounds (OOB) read
has been detected in the pure_strcmp function in utils.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pure-ftpd: fix CVE-2019-20176

In Pure-FTPd 1.0.49, a stack exhaustion issue was discovered in the
listdir function in ls.c.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2020-8112

opj_t1_clbl_decode_processor in openjp2/t1.c in OpenJPEG 2.3.1 through
2020-01-28 has a heap-based buffer overflow in the qmfbid==1 case, a
different issue than CVE-2020-6851.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2020-6851

OpenJPEG through 2.3.1 has a heap-based buffer overflow in
opj_t1_clbl_decode_processor in openjp2/t1.c because of lack of
opj_j2k_update_image_dimensions validation.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openjpeg: fix CVE-2019-12973

In OpenJPEG 2.3.1, there is excessive iteration in the
opj_t1_encode_cblks function of openjp2/t1.c. Remote attackers could
leverage this vulnerability to cause a denial of service via a crafted
bmp file. This issue is similar to CVE-2018-6616.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/emlog: annotate CVE-2019-16868 and CVE-2019-17073

CVE-2019-16868 and CVE-2019-17073 are misclassified (by our CVE tracker)
as affecting emlog, while in fact it affects http://www.emlog.net.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/linux-firmware: add missing symlinks

As of upstream commit 9cfefbd7fbdaa5ae769e3061c463f8345d146fb7
we must manually create symlinks as they are no longer present
in the archive but created at installation.

Fixes:
    http://autobuild.buildroot.net/results/46fdacbe4064d72aaafa9f52741121d8e4fe64ab/

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/shellinabox: fix CVE-2018-16789

libhttp/url.c in shellinabox through 2.20 has an implementation flaw in
the HTTP request parsing logic. By sending a crafted multipart/form-data
HTTP request, an attacker could exploit this to force shellinaboxd into
an infinite loop, exhausting available CPU resources and taking the
service down.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/suricata: fix CVE-2019-18792

An issue was discovered in Suricata 5.0.0. It is possible to
bypass/evade any tcp based signature by overlapping a TCP segment with a
fake FIN packet. The fake FIN packet is injected just before the PUSH
ACK packet we want to bypass. The PUSH ACK packet (containing the data)
will be ignored by Suricata because it overlaps the FIN packet (the
sequence and ack number are identical in the two packets). The client
will ignore the fake FIN packet because the ACK flag is not set. Both
linux and windows clients are ignoring the injected packet.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcgroup: fix CVE-2018-14348

libcgroup up to and including 0.41 creates /var/log/cgred with mode 0666
regardless of the configured umask, leading to disclosure of information

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs:nitrogen{6sx, 6x, 7, 8m}: fix typo in kernel headers version

A typo has been introduced during the last version bump [1].

[1] 00252b101a86ef136fc4afc045ba16324cbccb3b

Fixes:
[nitrogen6sx]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255632
[nitrogen6x]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255635
[nitrogen7]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255638
[nitrogen6m8]
https://gitlab.com/buildroot.org/buildroot/-/jobs/454255640

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/exiv2: annotate CVE-2019-13504

CVE-2019-13504 is misclassified (by our CVE tracker) as affecting
version 0.27.2, while in fact both commits that fixed this issue are
already in this version: bd0afe039043 and 54f0bebca032.

(From: https://security-tracker.debian.org/tracker/CVE-2019-13504)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/exiv2: fix CVE-2019-20421

In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input
file can result in an infinite loop and hang, with high CPU consumption.
Remote attackers could leverage this vulnerability to cause a denial of
service via a crafted file.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cairo: fix CVE-2018-19876

Add an upstream patch to fix CVE-2018-19876: cairo 1.16.0, in
cairo_ft_apply_variations() in cairo-ft-font.c, would free memory using a
free function incompatible with WebKit's fastMalloc, leading to an
application crash with a "free(): invalid pointer" error.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rdesktop: add xlib_libXrandr optional dependency

xlib_libXrandr is an optional dependency since version 1.7.0 and
https://github.com/rdesktop/rdesktop/commit/6ee9faeffcd9dd2e4c262d732e15a3a02278578d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exiv2: fix CVE-2019-17402

Exiv2 0.27.2 allows attackers to trigger a crash in Exiv2::getULong in
types.cpp when called from Exiv2::Internal::CiffDirectory::readDirectory
in crwimage_int.cpp, because there is no validation of the relationship
of the total size to the offset and size.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rdesktop: security bump to version 1.8.6

- Fix CVE-2019-15682: RDesktop version 1.8.4 contains multiple
  out-of-bound access read vulnerabilities in its code, which results in
  a denial of service (DoS) condition. This attack appear to be
  exploitable via network connectivity. These issues have been fixed in
  version 1.8.5
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openrc: remove keymaps units if kbd package is not selected

keymaps and save-keymaps require kbd_mode and dumpkeys, respectively, so
remove them if the kbd package is not selected (e.g. devices with serial
console, only).

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
  - expand to three commands to match the existing hook
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qpdf: fix comment

Commit 3f9bcc01b3ef94c8f138b6dccc861d9e222de5ef forgot to update comment

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qpdf: needs wchar

Upstream was not too keen [0] on applying fixes for toolchains without
wchar, so just require that.

The sole user selecting qpdf already depends on wchar, so update the
comment accordingly.

[0] https://github.com/qpdf/qpdf/pull/405#issuecomment-592971907

Fixes:
 - http://autobuild.buildroot.org/results/99c82d4775ed44bd04d0a48188ff590dcba73d69

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: drop the patch, add the dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openrc: fix post-install-target addition

OPENRC_POST_TARGET_INSTALL_HOOKS -> OPENRC_POST_INSTALL_TARGET_HOOKS

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/boost: annotate _IGNORE_CVES for CVE-2009-3654

This CVE does not affect the boost package, but is misclassified by our
CVS tracker. As per the advisory:

    Unspecified vulnerability in Boost before 6.x-1.03, a module for
    Drupal, allows remote attackers to create new webroot directories
    via unknown attack vectors.

Ignore the CVS, and expand a comment to explain it.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: expand the comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgdiplus: backport of fix for GifQuantizeBuffer

In newer version of giflib the GifQuantizeBuffer code was removed.

libgdiplus included the needed function by their own:
(https://github.com/mono/libgdiplus/pull/575).

This patch will become obsolete once libgdiplus is bumped to version 6.x.

Fixes:
http://autobuild.buildroot.net/results/46c5cf068cf9ea50e53491870d9dbf3f134c8c22

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openrc: needs kmod

openrc provides scripts that have been written for the big-gun kmod, and
so use options unknown to the busybox' provided applets:

  - Busybox modprobe does not have a "--first-time" option,
  - the "--verbose" option is just "-v",
  - the "--use-blacklist" option is just "-b". Also blacklist support is
    not selected in our default busybox configuration.

One of two options, is to "fix" or "adapt" openrc's scripts to busybox,
which means for the openrc package to go peek into files from the
busybox package, which is not nice, and can't work because that is not
available by the time we scan our Makefiles.

The other option, which this patch implements, is to just add a
dependency onto kmod and its tools.

Reported-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic.mk: in image install, print message before pre-hooks

In all steps, we print the message indicating the start of the step
using the MESSAGE macro before running pre-hooks. Except in the image
installation step, where the message is printed after the pre-hooks.

Let's fix this inconsistency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/exim: fix systemd service binary path

modern versions of exim are installed into sbin not bin

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libarchive: security bump to version 3.4.2

- Fix CVE-2020-9308: archive_read_support_format_rar5.c in libarchive
  before 3.4.2 attempts to unpack a RAR5 file with an invalid or
  corrupted header (such as a header size of zero), leading to a SIGSEGV
  or possibly unspecified other impact.
- use --with-nettle to enable nettle support, see
  https://github.com/libarchive/libarchive/commit/f96a71144b7725ca4a94d84bd27d7dca8c2f58d2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
  - drop new optional dependency to mbedtsl, forced off for now
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lxc: fix build with ultrasparc

Fixes:
 - http://autobuild.buildroot.org/results/17c2319850f02f24da6fbef9656c07f86fdc5a3a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libssh2: fix CVE-2019-17498

In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in
packet.c has an integer overflow in a bounds check, enabling an attacker
to specify an arbitrary (out-of-bounds) offset for a subsequent memory
read. A crafted SSH server may be able to disclose sensitive information
or cause a denial of service condition on the client system when a user
connects to the server.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/poco: PDF needs XML, JSON and Util

PDF needs XML, JSON and Util since version 1.9.0 and
https://github.com/pocoproject/poco/commit/c5acb2ac27a81a429e146780769f965e8284cadc

Fixes:
 - http://autobuild.buildroot.org/results/294b604a0e37aafbe085f0e6f0d1a83ab110c3a4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/dnsmasq: fix CVE-2019-14834

A vulnerability was found in dnsmasq before version 2.81, where the
memory leak allows remote attackers to cause a denial of service
(memory consumption) via vectors involving DHCP response creation.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/lz4: security bump to version 1.9.2

- Fix CVE-2019-17543: LZ4 before 1.9.2 has a heap-based buffer overflow
  in LZ4_write32 (related to LZ4_compress_destSize), affecting
  applications that call LZ4_compress_fast with a large input. (This
  issue can also lead to data corruption.) NOTE: the vendor states "only
  a few specific / uncommon usages of the API are at risk."
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squid: security bump to version 4.10

Drop patch (already in version)
Update indentation of hash file (two spaces)

Fix the following issues:
 - CVE-2020-8517: Buffer Overflow issue in ext_lm_group_acl helper.
 - CVE-2019-12528: Information Disclosure issue in FTP Gateway.
 - CVE-2020-8449, CVE-2020-8450: Improper Input Validation issues in
   HTTP Request processing.
 - CVE-2019-18679: Information Disclosure issue in HTTP Digest
   Authentication.
 - CVE-2019-18678: HTTP Request Splitting issue in HTTP message
   processing.
 - CVE-2019-18677: Cross-Site Request Forgery issue in HTTP Request
   processing.
 - CVE-2019-12523, CVE-2019-18676: Multiple issues in URI processing.
 - CVE-2019-12526: Heap Overflow issue in URN processing.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/zsh: security bump to version 5.8

- Fix CVE-2019-20044: In Zsh before 5.8, attackers able to execute
  commands can regain privileges dropped by the --no-PRIVILEGED option.
  Zsh fails to overwrite the saved uid, so the original privileges can
  be restored by executing MODULE_PATH=/dir/with/module zmodload with a
  module that calls setuid().
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ntfs-3g: annotate _IGNORE_CVES for the included security patch

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linknx: host-pkgconf is mandatory

host-pkgconf is a mandatory dependency, this will fix per-package build

Fixes:
 - http://autobuild.buildroot.org/results/cfda0ce53165bb22b691b5b6510f0ab096a41e17

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add Michael Fischer for gnuplot and sdl2

Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-generic: make file list logic parallel build compatible

The current solution used to collect the list of files installed by
packages does not work for top-level parallel build. Indeed, we rely
on a file created after the installation of the previous package to
build the list of files installed by the current package.

This works well when packages are built sequentially, but badly fails
when using top-level parallel build.

More specifically, top-level parallel build can fail with:

comm: /home/thomas/buildroot/output/build/.files-list-host.new: No such file or directory

Because that file has been removed concurrently by the build process
of another package.

This commit reworks the logic in a very straight-forward way. Before
the installation of each package, we store the list of files that are
already installed and store it in the package build directory. After
the installation of each package, we store again that list of files,
calculate the difference with the before file, and store that as the
list of files installed by that package, still in the package build
directory.

At the end of the build, in target-finalize we collect all the
collected information into the global package file lists, that
continue to be installed in the same location as before, with the same
name.

There are however some differences:

 (1) The files are no longer ordered in build order, but by alphabetic
     ordering of packages. Indeed, "build order" no longer makes any
     sense in the context of top-level parallel build.

 (2) Some files which were incorrectly tracked are no longer
     tracked. For example, the toolchain package is a target package,
     but it installs files in $(HOST_DIR). In the previous logic, the
     files installed by the toolchain package in $(HOST_DIR) were
     incorrectly affected to the next host package that was installed
     after the toolchain package. With our new logic, those files are
     no longer tracked at all. To fix this, we would have to change
     the logic to scan HOST_DIR/TARGET_DIR/STAGING_DIR for all
     installation steps, not just for the install-host, install-target
     and install-staging steps respecitively. But the result was
     already incorrect anyway, and therefore this should be fixed
     separately.

Note that the check_bin_arch hook needs to be adjusted: it was using
the global package-file-list.txt file, but this file is now created
only at the very end of the build. So instead, we use the current
package .file-list.txt file to know which packages have been installed
by the current package in $(TARGET_DIR).

Fixes:

  http://autobuild.buildroot.net/results/4e60fa31b1cd08bc7fdf9c5dd3a3f4941e029ba3/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-generic.mk: simplify step_pkg_size

Use the same trick in step_pkg_size as the one used in check_bin_arch:
factorize the two $(filter ...) calls into one, checking in one step
the step and whether it's the beginning or end of the step.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python3: bump to version 3.8.2

Bugfix release, fixing a number of issues.  For details, see the
announcement:

https://docs.python.org/release/3.8.2/whatsnew/changelog.html#python-3-8-2-final

Adjust the spacing in the hash file and update the hash of the license file
for a change in copyright years:

-2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Python Software Foundation;
+2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Python Software Foundation;

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/git: make _BUG_ condition more clear

As pointed by Peter combined condition of the 2 gcc bugs is potentially
wrong, but as Thomas pointed in this case it's not harmful. Let's fix it
anyway since it's basically wrong even it doesn't cause harm.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/swig: create a legacy symlink for swig3.0

The host-swig package installs the swig binary as 'swig' and adds a
swig<major> symlink (E.G.  swig4.0).  This causes issues for older software
which may not know about the 4.0 version of swig, E.G.  CMake 3.10.x
contains the following swig detection logic:

find_program(SWIG_EXECUTABLE NAMES swig3.0 swig2.0 swig)

If the host has a 3.x or 2.x variant of swig installed, then that will be
used instead of our host-swig.

As a workaround, also add a swig3.0 symlink so our host-swig will be used.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Peter: reworded]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/proftpd: security bump to version 1.3.6c

Fixes the following security issues:

- CVE-2020-9273: In ProFTPD 1.3.7, it is possible to corrupt the memory pool
  by interrupting the data transfer channel.  This triggers a use-after-free
  in alloc_pool in pool.c, and possible remote code execution.

And additionally, fixes a number of other issues.  For details, see the
release notes:

https://github.com/proftpd/proftpd/blob/1.3.6/RELEASE_NOTES

This also bumps the bundled libcap, so
0001-fix-kernel-header-capability-version.patch can be dropped.

While we are at it, adjust the white space in the .hash function to match
the new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone_qt5_defconfig: kernel builds needs host-openssl

Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.

Fixes:

914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915  #include <openssl/bio.h>

https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/{at91, atmel}*_defconfig: move to bluez5_utils

Commit 61a813339af43 (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs.  Fix them by changing to
bluez5-utils instead.

Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/docker-compose: update patch to allow all pyyaml 5.x versions

The recent bump of python-pyyaml to version 5.3 causes a runtime
failure in docker-compose:

pkg_resources.ContextualVersionConflict: (PyYAML 5.3 (/usr/lib/python3.8/site-packages), Requirement.parse('PyYAML<5.2,>=3.10'), {'docker-compose'})

https://gitlab.com/buildroot.org/buildroot/-/jobs/442151461

Fix it by adjusting 0003-support-PyYAML-up-to-5.1-version.patch to
allow all pyyaml 5.x versions, similar to what upstream has done
post-1.24.1:

https://github.com/docker/compose/commit/c818bfc62c0574009175d832c1a8a2857bf1b1bf

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/util-linux: disable systemd for host build

When building host-util-linux, the systemdsystemunitdir is set to the
real host directory, so the install step fails with:

/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.service': Permission denied
/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.timer': Permission denied

Since we don't need systemd support in host-util-linux, unconditionally
disable it for the host build.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale: use correct ahab-container.img file name

Commit 3f8ace002831a01ed6aec59b704bd92c8a3b957f
("board/freescale/common/imx: add support for i.MX8") had its
conflicts incorrectly tweaked when applied to Buildroot. The
ahab-container.img is installed with this name (ahab-container.img) by
the imx-firmware package, and not mx8qm-ahab-container.img or
mx8qx-ahab-container.img.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/brltty: use host pkg-config when building host tools

brltty builds host tools which rely on the expat library, and
pkg-config is used to detect the expat library.

Since commit cd16e18584066d2817d3acb3822e173f9f23455e ("pkgconf:
always keep system libs"), the wrapper script added
--keep-system-libs, which adds a -L$(STAGING_DIR)/usr/lib to the
pkg-config results instead of just -lexpat. So, previously, by chance,
the pkg-config result for the target expat was "good enough" for the
host expat as well. But now that -L$(STAGING_DIR)/usr/lib is added, it
breaks the build in all sort of ways as obviously building host
binaries with the library search path pointing to $(STAGING_DIR) is
not a good idea.

To fix that, this commit adjusts the brltty build system so that the
PKG_CONFIG_FOR_BUILD variable is used when using pkg-config to build
host binaries.

Fixes:

  http://autobuild.buildroot.net/results/5a64dfb845389882c366b6c91aaf5868c090a802/

Many thanks to the initial work from Fabrice Fontaine at
http://patchwork.ozlabs.org/patch/1238163/ which provided an initial
starting point for this investigation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/git: fix build failure due to gcc bug 93847

The git package exhibits gcc bug 93847 when built for the Nios2
architecture with optimization enabled, which causes a build failure.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 if BR2_TOOLCHAIN_HAS_GCC_BUG_93847=y.

Fixes:
http://autobuild.buildroot.net/results/e225e62ea2d48660df4110790664f0c3306c1ea9/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: introduce BR2_TOOLCHAIN_HAS_GCC_BUG_93847

git package fails to build for the Nios2 architecture with optimization
enabled with gcc < 9.x:
http://autobuild.buildroot.net/results/924/92484c49b655e4aa78ca52f124c6d8f605b9d06b/

It's been reported upstream:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93847

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-inputstream-adaptive: update LICENSE_FILES

Use LICENSE.GPL instead of src/main.cpp.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/aufs: add support for linux 5.x

Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Update for 2020.02-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fail2ban: The (host-python3) 2to3 utility needs to be present

During _POST_PATCH_HOOKS _DEPENDANCIES aren't guaranteed to be built,
however during _PRE_CONFIGURE_HOOKS they should be built.

Should fix:
http://autobuild.buildroot.net/results/dd8e225e2a49cfa6735bed11459007003a37c137/
http://autobuild.buildroot.net/results/e688c3652bd474ac682984e2e5947701942f0f57/

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/systemd: bump version to 244.3

For additional post-244 fixes.

Update the hash of the README after commit faba5b2b (Revert "Drop dbus
activation stub service") changed a comment about dbus:

-       dbus >= 1.11.0 (strictly speaking optional, but recommended)
+       dbus >= 1.4.0 (strictly speaking optional, but recommended)
+               NOTE: If using dbus < 1.9.18, you should override the default
+               policy directory (--with-dbuspolicydir=/etc/dbus-1/system.d).

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5: drop 5.6 support

As discussed during the FOSDEM2019 develop days, Qt 5.6 is very old (5.6.3
was released in September 2017, and 5.6.x became EOL in March 2019), so drop
it before the new Buildroot LTS release:

https://elinux.org/Buildroot:DeveloperDaysFOSDEM2019#Qt5_versions_to_support:_keep_5.6_or_a_newer_LTS.3F

And add legacy handling for it.

There are a number of places where code checks for
BR2_PACKAGE_QT5_VERSION_LATEST, so leave that as a blind option for now to
not break the build.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-tools: filter debugging symbols for hyperv

Workaround for:

ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
hv_vss_daemon.o: file not recognized: File format not recognized

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/minicom: fix static linking with ncurses

Fixes:
 - http://autobuild.buildroot.org/results/d3edbab1f2cd0f7b790e2559dc8d489497ae02f3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.19.x / 5.4.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/armadillo: fix license

License is Apache-2.0 since version 7.800:
http://arma.sourceforge.net/license.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Config.in: add BR2_HOST_GCC_AT_LEAST_9

Fedora 30 switched to GCC 9.x. [1]

[1] https://fedoraproject.org/wiki/Changes/GCC9

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kvm-unit-tests: fix build with SSP

Add a patch to correct a typo in the Makefile, so -fno-stack-protector /
-fno-stack-protector-all are really used.  With this applied, kvm-unit-tests
will always be built without SSP as intented by upstream.  This will fix the
build on ppc64 with SSP that started to fail for an unknown reason since
November 27th.

Moreover, the Arch Linux workaround could also be removed in a follow-up
patch.

Fixes:
 - http://autobuild.buildroot.org/results/ad689b08173548af21dd1fb0e827fd561de6dfef

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/fluidsynth: bump to version 2.1.1

- This will fix a static build failure with readline thanks to
  https://github.com/FluidSynth/fluidsynth/commit/c538c9fa7e392ce16c3354696e7dc7781a78a300
- Update indentation of hash file (two spaces)

Fixes:
 - http://autobuild.buildroot.org/results/88609eefe55af2ca50d43e17d3424b923528b07a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skeleton-init-openrc: fix root filesystem ro/rw remount

The regular expressions used in the sed commands assumes that there is a
space after '/dev/root' but the skeleton file contains a tab. Use a more
flexible '[[:blank:]]', instead.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rcw: allow not having custom rcwi files

A project could quite possibly have a custom rcw file
that does not rely on any custom rcw include files (rcwi).

Allow the build to succeed if this is the case.

Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
[yann.morin.1998@free.fr: install includes in a separate hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/qt5/qt5webengine: fix translations target install path

Through the evolution of the qt5webengine package patch ([1], [2])
until the initial commit ([3]) the translations target install
path got mangled resulting in a double trailing qtwebengine_locales
path:
  /usr/translations/qtwebengine_locales/qtwebengine_locales
Instead of:
  /usr/translations/qtwebengine_locales

Fixes the translations runtime access failure resulting in the
following warning:

  WARNING:resource_bundle_qt.cpp(116): locale_file_path.empty() for locale

[1] http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2] https://patchwork.ozlabs.org/patch/640633
[3] https://git.buildroot.net/buildroot/commit/?id=89080bac9bc47946a09c1e74f2f872363bf6785b

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libinput: bump version to 1.15.2

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2020-February/041227.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openvmtools: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/e0e7ed448df8bdd6cb13a0989d7a6c7dbaa5bc4e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/smartmontools: fix build without stack-protector"

This reverts commit dc171f123c6b320c4930ba00debeb34fede82d99, which was
aimed at the next branch, not master.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/smartmontools: fix build without stack-protector

Fixes:
 - http://autobuild.buildroot.org/results/0de9f2a69fa2a39164211299f8a429d2fec6935a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/busybox: fix individual binaries installation

Call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in BUSYBOX_INSTALL_TARGET_CMDS,
not in BUSYBOX_INSTALL_INIT_SYSV. This should have been done in commit
b1e07d6d796e67a980d4a05d04c64f00162245ff but was somehow lost during the
review/aply process.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: add libftdi1 test case

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libftdi1: fix unresolved symbol issue

GCC later than 5.x produce _fdti1.so file with an undefined
symbol str2charp_size due to C99 inline semantics change. So
remove this keyword.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: add upstream status]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/at: fix parallel build failure

Add a patch to finally fix parallel build failure. Patch is pending
upstream:
https://salsa.debian.org/debian/at/merge_requests/14

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/tpm2-tss: bump to version 2.3.3

Bugfix release, fixing a number of issues:

- Fixed mixing salted and unsalted sessions in the same ESAPI context
- Removed use of VLAs from TPML marshal code
- Added check for object node before calling compute_session_value function
- Fixed auth calculation in Esys_StartAuthSession called with optional parameters
- Fixed compute_encrypted_salt error handling in Esys_StartAuthSession
- Fixed exported symbols map for libtss2-mu

The 2.3.3 tarball accidently contains a Makefile-fuzz-generated.am with
content from a fuzz testing run (rather than an empty file as in earlier
releases), confusing autoreconf together with our
0001-configure-Only-use-CXX-when-fuzzing.patch.

Work around that by adding a post-patch hook to truncate the file.  The
issue has been reported upstream and the release logic has been changed to
ensure this does not happen again for future releases:

https://github.com/tstruk/tpm2-tss/commit/d163041e3bafa23c0be89c82a99b8501634ebdb4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

docs/manual: clarify the <PKG>_PATCH_DEPENDENCIES guarantee

Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.

Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mbedtls: security bump to version 2.16.5

- Fix potential memory overread when performing an ECDSA signature
   operation. The overread only happens with cryptographically low
   probability (of the order of 2^-n where n is the bitsize of the
   curve) unless the RNG is broken, and could result in information
   disclosure or denial of service (application crash or extra resource
   consumption).
 - To avoid a side channel vulnerability when parsing an RSA private
   key, read all the CRT parameters from the DER structure rather than
   reconstructing them.
 - Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/luv: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/83b34e606b128546da8a70836d039090e334a1ec

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: mark patch accepted upstream]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libsvgtiny: fix parallel build

Fix previous commit[1] which purpose was to fix parallel build. It
didn't work since it assigned $(MAKE1) to LIBSVGTINY_MAKE, but this is a
generic-package and building is done using $(MAKE), then LIBSVGTINY_MAKE
was ignored. Let's substitute instead $(MAKE) with $(MAKE1) in
LIBSVGTINY_BUILD_CMDS.

[1]:
https://git.buildroot.net/buildroot/commit/?id=26d67a2599d6c88facd5178de853fa355244e7c2

Fixes:
http://autobuild.buildroot.net/results/67d/67d341c0cc272323d6e231a20796a6848c21d760/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
  - use $(MAKE1) in all three step
  - move comment out of the define
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

infra: don't be verbose when calling the instrumentation steps

Commit 509db3b88a added calls to (parts of) the instrumentation steps.
However, those calls are echoed, unlike the other places where we call
them (in the package infra).

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>

package/mesa3d: gbm needs a DRI driver or a Gallium driver w/ EGL

src/gbm/cd6bfad@@gbm at sha/main_backend.c.o: In function `_gbm_create_device':
backend.c:(.text+0x38): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x40): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x74): undefined reference to `gbm_dri_backend'
backend.c:(.text+0x78): undefined reference to `gbm_dri_backend'
collect2: error: ld returned 1 exit status

This issue has been trigged since [1]:
"package/mesa3d: add option to configure gbm support"

Before the patch, the gbm support was autodetected by meson and enabled
only when at least one dri driver was enabled [2].

On the Buildroot side, the gbm support was explicitely enabled only when
BR2_PACKAGE_MESA3D_OPENGL_EGL was set.

We have two cases:
- At least one DRI driver.
- No DRI driver but one Gallium w/ EGL enable (EGL selected or not by the
  Gallium driver). In this case the meson build system set with_dri to true
  (even if no DRI driver is enabled) to use the builtin:egl_dri2 [3].

The gbm's meson build system seems to handle the case where no dri driver is
enabled [4] but it still use main/backend.c source file [6] that use
gbm_dri_backend [7]. So with_dri2 must always be set.

Probably a missing check in meson.build:

 if with_gbm and not with_dri
   error('GBM backend needs a dri driver or a gallium driver w/ EGL support.')
 endif

Add a dependency on GBM option:

 depends on BR2_PACKAGE_MESA3D_DRI_DRIVER \
         || (BR2_PACKAGE_MESA3D_GALLIUM_DRIVER && BR2_PACKAGE_MESA3D_OPENGL_EGL)

Fixes:
http://autobuild.buildroot.net/results/b9b6281983388dc22d929887d653da3db60f1f2c

[1] b6c051acf787c804e732bc58ba8d7e440701a168
[2] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L348
[3] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L212
[4] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/meson.build#L37
[5] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/meson.build#L24
[6] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/src/gbm/main/backend.c#L38
[7] http://lists.busybox.net/pipermail/buildroot/2020-February/274425.html

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: fix dependency of comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bash: fix build on uclibc

Fixes:
 - http://autobuild.buildroot.org/results/2ae2eca969e6d1febcacb8b0423ced3aad7505a2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bash: add upstream patches

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mesa3d: select gbm if no glx, no egl and no osmesa-classic

This issue has been trigged since [1]:
"package/mesa3d: add option to configure gbm support"

Before the patch, the gbm support was autodetected by meson and enabled
only when at least one dri driver was enabled [2].

On the Buildroot side, the gbm support was explicitely enabled only when
BR2_PACKAGE_MESA3D_OPENGL_EGL was set.

Now, the gbm support is explicitely disabled but the meson build system
check if at least one option OpenGL GLX or OpenGL EGL or GBM or
OSMesa (classic) library is enabled [3].

The previous behavious was to enable GBM when GLX, EGL and OSMesa are
disabled. So select GBM symbol for this case.

Fixes:
http://autobuild.buildroot.net/results/a14f329560f8022f7ba8ec43ad8eed84e005d226

[1] b6c051acf787c804e732bc58ba8d7e440701a168
[2] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L348
[3] https://gitlab.freedesktop.org/mesa/mesa/blob/19.3/meson.build#L449

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/jpeg-turbo: force fPIC for shared libraries

When BR2_SSP_ALL is set, there is a link issue due to missing -fPIC in CFLAGS.
Set CMAKE_POSITION_INDEPENDENT_CODE=ON to add it.

This is a similar fix as for gtest package [1]

[1] https://git.buildroot.net/buildroot/commit/?id=2026621f3c60167aa8ba48e658be1b214d1347d7

Fixes:
http://autobuild.buildroot.net/results/e1f/e1f164cee16b037c0232fdda40fc16caf8f0c0af

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Murat Demirten <mdemirten@yh.com.tr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Gilles Talis for libosip2 and libeXosip2

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/radvd: disable by default in systemd preset-all

We don't provide a configuration file, so disable radvd by default.

Update the help message with instructions on how to enable radvd at
build time with systemd.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: security bump version to 7.4.3

Changelog: https://www.php.net/ChangeLog-7.php#7.4.3

Fixes CVE-2020-7061, CVE-2020-7062 & CVE-2020-7063.

Removed patch applied upstream:
https://github.com/php/php-src/commit/f0f5c415a6e0abc40514f97113deb52a343174ee

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/external: fix SSP help texts for custom toolchains

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

Config.in: ensure BR2_SSP_STRONG can only be selected if supported

This commit ensures that BR2_SSP_STRONG cannot be chosen if the
toolchain doesn't support strong SSP.

Fixes:

  http://autobuild.buildroot.net/results/cba93a681d10692c4e4c5584e4c962bd18a608d4/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

toolchain/toolchain-external/toolchain-external-custom: add option to indicate SSP_STRONG support

This commit adds a user-visible option
BR2_TOOLCHAIN_EXTERNAL_HAS_SSP_STRONG, which will allow the user to
indicate if the custom external toolchain does or does not have
SSP_STRONG support. Depending on this, the user will be able to use
(or not) the BR2_SSP_STRONG option.

Checking if what the user said is true or not about this is already
done in toolchain/toolchain-external/pkg-toolchain-external.mk:

        $$(Q)$$(call check_toolchain_ssp,$$(TOOLCHAIN_EXTERNAL_CC),$(BR2_SSP_OPTION))

If the user selects BR2_SSP_STRONG, this will check if
-fstack-protector-strong is really supported.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

toolchain: add hidden BR2_TOOLCHAIN_HAS_SSP_STRONG boolean

This will allow toolchain to indicate if they support
-fstack-protector-strong or not.

Whenever the gcc version is >= 4.9, we always have SSP_STRONG support
if we have SSP support. However, some toolchains older than gcc 4.9
might have backported SSP_STRONG support, which is why we cannot rely
just on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9.

Having this "default" value allows to avoid adding a "select
BR2_TOOLCHAIN_HAS_SSP_STRONG" in the internal toolchain logic plus in
almost external toolchains. But it allows custom external toolchains
that are pre-4.9 to potentially declare that they support strong SSP.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sdbusplus: fix indentation

Fix a check-package error introduce by 6bf74ce3db (package/sdbusplus:
create m4 directory before autoreconf):

    package/sdbusplus/sdbusplus.mk:29: expected indent with tabs

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: John Faith <jfaith@impinj.com>
Cc: Michael Walle <michael@walle.cc>

docs/website: add commercial support section

Add a section to the support page for commercial support.

Add Mind, Bootlin and Smile in that section.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/pkg-stats: iterate over CVEs in streaming

The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).

However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.

To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>